Mostafa Saleh [Mon, 3 Nov 2025 12:33:49 +0000 (12:33 +0000)]
iommu/io-pgtable-arm: Remove arm_lpae_dump_ops()
At the moment, if the selftest fails it prints a lot of information
about the page table (size, levels...) this requires access to many
internals, which has to be exposed in the next patch moving the
tests out.
Instead, we can simplify the print to only print the fmt and
for each test ias, oas and pgsize_bitmap are already printed.
That is enough to identify the failed case, and the rest can
be deduced from the code.
Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Bagas Sanjaya [Fri, 7 Nov 2025 08:13:01 +0000 (15:13 +0700)]
iommupt: Describe @bitnr parameter
Sphinx reports kernel-doc warnings when making htmldocs:
WARNING: ./drivers/iommu/generic_pt/pt_common.h:361 function parameter 'bitnr' not described in 'pt_test_sw_bit_acquire'
WARNING: ./drivers/iommu/generic_pt/pt_common.h:371 function parameter 'bitnr' not described in 'pt_set_sw_bit_release'
Describe @bitnr to squash them.
Fixes: bcc64b57b48e ("iommupt: Add basic support for SW bits in the page table") Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is because of duplicate double colon code block markers: one after
generic_pt/fmt/iommu_amdv1.c and the one in its preceding paragraph. The
resulting htmldocs, however, only marks the include listing (after the
former) up as it should be.
Drop the latter to fix the warning.
Fixes: ab0b572847ac ("genpt: Add Documentation/ files") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20251106143925.578e411b@canb.auug.org.au/ Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:37 +0000 (15:22 -0300)]
iommu/vt-d: Follow PT_FEAT_DMA_INCOHERENT into the PASID entry
Currently a incoherent walk domain cannot be attached to a coherent
capable iommu. Kevin says HW probably doesn't exist with such a mixture,
but making the driver support it makes logical sense anyhow.
When building the PASID entry the PWSNP (Page Walk Snoop) bit tells the HW
if it should issue snoops. If the page table is cache flushed because of
PT_FEAT_DMA_INCOHERENT then it is fine to set this bit to 0 even if the HW
supports 1.
Weaken the compatible check to permit a coherent instance to accept an
incoherent table and fix the PASID table construction to set PWSNP from
PT_FEAT_DMA_INCOHERENT.
SVA always sets PWSNP.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:36 +0000 (15:22 -0300)]
iommu/vt-d: Use the generic iommu page table
Replace the VT-d iommu_domain implementation of the VT-d second stage and
first stage page tables with the iommupt VTDSS and x86_64
pagetables. x86_64 is shared with the AMD driver.
There are a couple notable things in VT-d:
- Like AMD the second stage format is not sign extended, unlike AMD it
cannot decode a full 64 bits. The first stage format is a normal sign
extended x86 page table
- The HW caps can indicate how many levels, how many address bits and what
leaf page sizes are supported in HW. As before the highest number of
levels that can translate the entire supported address width is used.
The supported page sizes are adjusted directly from the dedicated
first/second stage cap bits.
- VTD requires flushing 'write buffers'. This logic is left unchanged,
the write buffer flushes on any gather flush or through iotlb_sync_map.
- Like ARM, VTD has an optional non-coherent page table walker that
requires cache flushing. This is supported through PT_FEAT_DMA_INCOHERENT
the same as ARM, however x86 can't use the DMA API for flush, it must
call the arch function clflush_cache_range()
- The PT_FEAT_DYNAMIC_TOP can probably be supported on VT-d someday for the
second stage when it uses 128 bit atomic stores for the HW context
structures.
- PT_FEAT_VTDSS_FORCE_WRITEABLE is used to work around ERRATA_772415_SPR17
- A kernel command line parameter "sp_off" disables all page sizes except
4k
Remove all the unused iommu_domain page table code. The debugfs paths have
their own independent page table walker that is left alone for now.
This corrects a race with the non-coherent walker that the ARM
implementations have fixed:
CPU 0 CPU 1
pfn_to_dma_pte() pfn_to_dma_pte()
pte = &parent[offset];
if (!dma_pte_present(pte)) {
try_cmpxchg64(&pte->val)
pte = &parent[offset];
.. dma_pte_present(pte) ..
[...]
// iommu_map() completes
// Device does DMA
domain_flush_cache(pte)
The CPU 1 mapping operation shares a page table level with the CPU 0
mapping operation. CPU 0 installed a new page table level but has not
flushed it yet. CPU1 returns from iommu_map() and the device does DMA. The
non coherent walker fails to see the new table level installed by CPU 0
and fails the DMA with non-present.
The iommupt PT_FEAT_DMA_INCOHERENT implementation uses the ARM design of
storing a flag when CPU 0 completes the flush. If the flag is not set CPU
1 will also flush to ensure the HW can fully walk to the PTE being
installed.
Cc: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:33 +0000 (15:22 -0300)]
iommupt: Add the Intel VT-d second stage page table format
The VT-d second stage format is almost the same as the x86 PAE format,
except the bit encodings in the PTE are different and a few new PTE
features, like force coherency are present.
Among all the formats it is unique in not having a designated present bit.
Comparing the performance of several operations to the existing version:
Cc: Tina Zhang <tina.zhang@intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:32 +0000 (15:22 -0300)]
iommupt: Flush the CPU cache after any writes to the page table
Flush the CPU cache for the page table memory after each set of writes to
the page table. The iommu should have visibility to the updated entries as
soon as the map/unmap/etc operations return, like normal coherent hardware
does.
The caches also have to be flushed before any gather can be submitted to
the driver.
Implement the same solution to the race as io-pgtable-arm by using a
software PTE bit to track if a table entry has been flushed or not. If
another thread is still flushing then another concurrent map operation
could return without IOMMU visibility to a required table entry. The SW
bit will tell the second thread to also flush the cache.
Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:30 +0000 (15:22 -0300)]
iommupt: Add basic support for SW bits in the page table
SW bits can be placed on items, including table entries, single OA's and
individual items within a contiguous OA. They are guaranteed to be ignored
by the HW. The API is very basic since the only use case so far is a
single bit.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 18:22:29 +0000 (15:22 -0300)]
iommu/pages: Add support for incoherent IOMMU page table walkers
Some IOMMU HW cannot snoop the CPU cache when it walks the IO page tables.
The CPU is required to flush the cache to make changes visible to the HW.
Provide some helpers from iommu-pages to manage this. The helpers combine
both the ARM and x86 (used in Intel VT-d) versions of the cache flushing
under a single API.
The ARM version uses the DMA API to access the cache flush on the
assumption that the iommu is using a direct mapping and is already marked
incoherent. The helpers will do the DMA API calls to set things up and
keep track of DMA mapped folios using a bit in the ioptdesc so that
unmapping on error paths is cleaner.
The Intel version just calls the arch cache flush call directly and has no
need to cleanup prior to destruction.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:13 +0000 (14:30 -0400)]
iommupt: Add a kunit test for the IOMMU implementation
This intends to have high coverage of the page table format functions and
the IOMMU implementation itself, exercising the various corner cases.
The kunit tests can be run in the kunit framework, using commands like:
tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 --make_options LLVM=-19 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_uml --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386 --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386pae --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_X86_PAE=y
There are several interesting corner cases on the 32 bit platforms that
need checking.
Like the generic tests, these are run on the format's configuration list
using kunit "params". This also checks the core iommu parts of the page
table code as it enters the logic through a mock iommu_domain.
The following are checked:
- PT_FEAT_DYNAMIC_TOP properly adds levels one by one
- Every page size can be iommu_map()'d, and mapping creates that size
- iommu_iova_to_phys() works with every page size
- Test converting OA -> non present -> OA when the two OAs overlap and
free table levels
- Test that unmap stops at holes, unmap doesn't split, and unmap returns
the right values for partial unmap requests
- Randomly map/unmap. Checks map with random sizes, that map fails when
hitting collisions doing nothing, unmap/map with random intersections and
full unmap of random sizes. Also checks iommu_iova_to_phys() with random
sizes
- Check for memory leaks by monitoring NR_SECONDARY_PAGETABLE
Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Replace the io_pgtable versions with pt_iommu versions. The v2 page table
uses the x86 implementation that will be eventually shared with VT-d.
This supports the same special features as the original code:
- increase_top for the v1 format to allow scaling from 3 to 6 levels
- non-present flushing
- Dirty tracking for v1 only
- __sme_set() to adjust the PTEs for CC
- Optimization for flushing with virtualization to minimize the range
- amd_iommu_pgsize_bitmap override of the native page sizes
- page tables allocate from the device's NUMA node
Rework the domain ops so that v1/v2 get their own ops. Make dedicated
allocation functions for v1 and v2. Hook up invalidation for a top change
to struct pt_iommu_flush_ops. Delete some of the iopgtable related code
that becomes unused in this patch. The next patch will delete the rest of
it.
This fixes a race bug in AMD's increase_address_space() implementation. It
stores the top level and top pointer in different memory, which prevents
other threads from reading a coherent version:
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:10 +0000 (14:30 -0400)]
iommupt: Add the x86 64 bit page table format
This is used by x86 CPUs and can be used in AMD/VT-d x86 IOMMUs. When a
x86 IOMMU is running SVA the MM will be using this format.
This implementation follows the AMD v2 io-pgtable version.
There is nothing remarkable here, the format can have 4 or 5 levels and
limited support for different page sizes. No contiguous pages support.
x86 uses a sign extension mechanism where the top bits of the VA must
match the sign bit. The core code supports this through
PT_FEAT_SIGN_EXTEND which creates and upper and lower VA range. All the
new operations will work correctly in both spaces, however currently there
is no way to report the upper space to other layers. Future patches can
improve that.
In principle this can support 3 page tables levels matching the 32 bit PAE
table format, but no iommu driver needs this. The focus is on the modern
64 bit 4 and 5 level formats.
Comparing the performance of several operations to the existing version:
The small -ve values in the iommu_unmap() are due to the core code calling
iommu_pgsize() before invoking the domain op. This is unncessary with this
implementation. Future work optimizes this and gets to 2%, 4%, 3%.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:09 +0000 (14:30 -0400)]
iommufd: Change the selftest to use iommupt instead of xarray
The iommufd self test uses an xarray to store the pfns and their orders to
emulate a page table. Make it act more like a real iommu driver by
replacing the xarray with an iommupt based page table. The new AMDv1 mock
format behaves similarly to the xarray.
Add set_dirty() as a iommu_pt operation to allow the test suite to
simulate HW dirty.
Userspace can select between several formats including the normal AMDv1
format and a special MOCK_IOMMUPT_HUGE variation for testing huge page
dirty tracking. To make the dirty tracking test work the page table must
only store exactly 2M huge pages otherwise the logic the test uses
fails. They cannot be broken up or combined.
Aside from aligning the selftest with a real page table implementation,
this helps test the iommupt code itself.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:08 +0000 (14:30 -0400)]
iommupt: Add a mock pagetable format for iommufd selftest to use
The iommufd self test uses an xarray to store the pfns and their orders to
emulate a page table. Slightly modify the amdv1 page table to create a
real page table that has similar properties:
- 2k base granule to simulate something like a 4k page table on a 64K
PAGE_SIZE ARM system
- Contiguous page support for every PFN order
- Dirty tracking
AMDv1 is the closest format, as it is the only one that already supports
every page size. Tweak it to have only 5 levels and an 11 bit base granule
and compile it separately as a format variant.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:07 +0000 (14:30 -0400)]
iommupt: Add a kunit test for Generic Page Table
This intends to have high coverage of the page table format functions, it
uses the IOMMU implementation to create a tree which it then walks through
and directly calls the generic page table functions to test them.
It is a good starting point to test a new format header as it is often
able to find typos and inconsistencies much more directly, rather than
with an obscure failure in the iommu implementation.
The tests can be run with commands like:
tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 --make_options LLVM=-19 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_uml --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_WERROR=n
tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386 --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386pae --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_X86_PAE=y
There are several interesting corner cases on the 32 bit platforms that
need checking.
The format can declare a list of configurations that generate different
configurations the initialize the page table, for instance with different
top levels or other parameters. The kunit will turn these into "params"
which cause each test to run multiple times.
The tests are repeated to run at every table level to check that all the
item encoding formats work.
The following are checked:
- Basic init works for each configuration
- The various log2 functions have the expected behavior at the limits
- pt_compute_best_pgsize() works
- pt_table_pa() reads back what pt_install_table() writes
- range.max_vasz_lg2 works properly
- pt_table_oa_lg2sz() and pt_table_item_lg2sz() use a contiguous
non-overlapping set of bits from the VA up to the defined max_va
- pt_possible_sizes() and pt_can_have_leaf() produces a sensible layout
- pt_item_oa(), pt_entry_oa(), and pt_entry_num_contig_lg2() read back
what pt_install_leaf_entry() writes
- pt_clear_entry() works
- pt_attr_from_entry() reads back what pt_iommu_set_prot() &
pt_install_leaf_entry() writes
- pt_entry_set_write_clean(), pt_entry_make_write_dirty(), and
pt_entry_write_is_dirty() work
Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:06 +0000 (14:30 -0400)]
iommupt: Add read_and_clear_dirty op
IOMMU HW now supports updating a dirty bit in an entry when a DMA writes
to the entry's VA range. iommufd has a uAPI to read and clear the dirty
bits from the tables.
This is a trivial recursive descent algorithm to read and optionally clear
the dirty bits. The format needs a function to tell if a contiguous entry
is dirty, and a function to clear a contiguous entry back to clean.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:05 +0000 (14:30 -0400)]
iommupt: Add map_pages op
map is slightly complicated because it has to handle a number of special
edge cases:
- Overmapping a previously shared, but now empty, table level with an OA.
Requries validating and freeing the possibly empty tables
- Doing the above across an entire to-be-created contiguous entry
- Installing a new shared table level concurrently with another thread
- Expanding the table by adding more top levels
Table expansion is a unique feature of AMDv1, this version is quite
similar except we handle racing concurrent lockless map. The table top
pointer and starting level are encoded in a single uintptr_t which ensures
we can READ_ONCE() without tearing. Any op will do the READ_ONCE() and use
that fixed point as its starting point. Concurrent expansion is handled
with a table global spinlock.
When inserting a new table entry map checks that the entire portion of the
table is empty. This includes freeing any empty lower tables that will be
overwritten by an OA. A separate free list is used while checking and
collecting all the empty lower tables so that writing the new entry is
uninterrupted, either the new entry fully writes or nothing changes.
A special fast path for PAGE_SIZE is implemented that does a direct walk
to the leaf level and installs a single entry. This gives ~15% improvement
for iommu_map() when mapping lists of single pages.
This version sits under the iommu_domain_ops as map_pages() but does not
require the external page size calculation. The implementation is actually
map_range() and can do arbitrary ranges, internally handling all the
validation and supporting any arrangment of page sizes. A future series
can optimize iommu_map() to take advantage of this.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:04 +0000 (14:30 -0400)]
iommupt: Add unmap_pages op
unmap_pages removes mappings and any fully contained interior tables from
the given range. This follows the now-standard iommu_domain API definition
where it does not split up larger page sizes into smaller. The caller must
perform unmap only on ranges created by map or it must have somehow
otherwise determined safe cut points (eg iommufd/vfio use iova_to_phys to
scan for them)
A future work will provide 'cut' which explicitly does the page size split
if the HW can support it.
unmap is implemented with a recursive descent of the tree. If the caller
provides a VA range that spans an entire table item then the table memory
can be freed as well.
If an entire table item can be freed then this version will also check the
leaf-only level of the tree to ensure that all entries are present to
generate -EINVAL. Many of the existing drivers don't do this extra check.
This version sits under the iommu_domain_ops as unmap_pages() but does not
require the external page size calculation. The implementation is actually
unmap_range() and can do arbitrary ranges, internally handling all the
validation and supporting any arrangment of page sizes. A future series
can optimize __iommu_unmap() to take advantage of this.
Freed page table memory is batched up in the gather and will be freed in
the driver's iotlb_sync() callback after the IOTLB flush completes.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:02 +0000 (14:30 -0400)]
iommupt: Add the AMD IOMMU v1 page table format
AMD IOMMU v1 is unique in supporting contiguous pages with a variable size
and it can decode the full 64 bit VA space. Unlike other x86 page tables
this explicitly does not do sign extension as part of allowing the entire
64 bit VA space to be supported.
The general design is quite similar to the x86 PAE format, except with a
6th level and quite different PTE encoding.
This format is the only one that uses the PT_FEAT_DYNAMIC_TOP feature in
the existing code as the existing AMDv1 code starts out with a 3 level
table and adds levels on the fly if more IOVA is needed.
Comparing the performance of several operations to the existing version:
The ~5-17x speedup when working with mutli-PTE map/unmaps is because the
AMD implementation rewalks the entire table on every new PTE while this
version retains its position. The same speedup will be seen with dirtys as
well.
The old implementation triggers a compiler optimization that ends up
generating a "rep stos" memset for contiguous PTEs. Since AMD can have
contiguous PTEs that span 2Kbytes of table this is a huge win compared to
a normal movq loop. It is why the unmap side has a fairly flat runtime as
the contiguous PTE sides increases. This version makes it explicit with a
memset64() call.
Jason Gunthorpe [Tue, 4 Nov 2025 18:30:01 +0000 (14:30 -0400)]
iommupt: Add the basic structure of the iommu implementation
The existing IOMMU page table implementations duplicate all of the working
algorithms for each format. By using the generic page table API a single C
version of the IOMMU algorithms can be created and re-used for all of the
different formats used in the drivers. The implementation will provide a
single C version of the iommu domain operations: iova_to_phys, map, unmap,
and read_and_clear_dirty.
Further, adding new algorithms and techniques becomes easy to do across
the entire fleet of drivers and formats.
The C functions are drop in compatible with the existing iommu_domain_ops
using the IOMMU_PT_DOMAIN_OPS() macro. Each per-format implementation
compilation unit will produce exported symbols following the pattern
pt_iommu_FMT_map_pages() which the macro directly maps to the
iommu_domain_ops members. This avoids the additional function pointer
indirection like io-pgtable has.
The top level struct used by the drivers is pt_iommu_table_FMT. It
contains the other structs to allow container_of() to move between the
driver, iommu page table, generic page table, and generic format layers.
To create an alias to avoid renaming 'domain' in a lot of driver code.
This allows all the layers to access all the necessary functions to
implement their different roles with no change to any of the existing
iommu core code.
Implement the basic starting point: pt_iommu_init(), get_info() and
deinit().
Jason Gunthorpe [Tue, 4 Nov 2025 18:29:59 +0000 (14:29 -0400)]
genpt: Generic Page Table base API
The generic API is intended to be separated from the implementation of
page table algorithms. It contains only accessors for walking and
manipulating the table and helpers that are useful for building an
implementation. Memory management is not in the generic API, but part of
the implementation.
Using a multi-compilation approach the implementation module would include
headers in this order:
The common code then enforces a function signature so that there is no
drift in function arguments, or accidental polymorphic functions (as has
been slightly troublesome in mm). Use of function-like #defines are
avoided in the format even though many of the functions are small enough.
Provide kdocs for the API surface.
This is enough to implement the 8 initial format variations with all of
their features:
* Entries comprised of contiguous blocks of IO PTEs for larger page
sizes (AMDv1, ARMv8)
* Multi-level tables, up to 6 levels. Runtime selected top level
* The size of the top table level can be selected at runtime (ARM's
concatenated tables)
* The number of levels in the table can optionally increase dynamically
during map (AMDv1)
* Optional leaf entries at any level
* 32 bit/64 bit virtual and output addresses, using every bit
* Sign extended addressing (x86)
* Dirty tracking
A basic simple format takes about 200 lines to declare the require inline
functions.
Nicolin Chen [Thu, 23 Oct 2025 02:21:09 +0000 (19:21 -0700)]
iommu: Pass in old domain to attach_dev callback functions
The IOMMU core attaches each device to a default domain on probe(). Then,
every new "attach" operation has a fundamental meaning of two-fold:
- detach from its currently attached (old) domain
- attach to a given new domain
Modern IOMMU drivers following this pattern usually want to clean up the
things related to the old domain, so they call iommu_get_domain_for_dev()
to fetch the old domain.
Pass in the old domain pointer from the core to drivers, aligning with the
set_dev_pasid op that does so already.
Ensure all low-level attach fcuntions in the core can forward the correct
old domain pointer. Thus, rework those functions as well.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Nicolin Chen [Thu, 23 Oct 2025 02:21:08 +0000 (19:21 -0700)]
iommu: Do not revert set_domain for the last gdev
The last gdev is the device that failed the __iommu_device_set_domain().
So, it doesn't need to be reverted, given it's attached to group->domain
already.
This is not a problem currently, since it's a simply re-attach. However,
the core will need to pass in the old domain to __iommu_device_set_domain
so the old domain pointers would be inconsistent between a failed device
and all its prior succeeded devices, as all the prior devices need to be
reverted.
Avoid the re-attach for the last gdev, by breaking before the revert.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Nicolin Chen [Thu, 23 Oct 2025 02:21:06 +0000 (19:21 -0700)]
iommu/exynos-iommu: Set release_domain to exynos_identity_domain
Following a coming core change to pass in the old domain pointer into the
attach_dev op and its callbacks, exynos_iommu_identity_attach() will need
this new argument too, which the release_device op doesn't provide.
Instead, the core provides a release_domain to attach to the device prior
to invoking the release_device callback. Thus, simply use that.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Thu, 23 Oct 2025 02:21:04 +0000 (19:21 -0700)]
iommu: Generic support for RMRs during device release
Generally an IOMMU driver should leave the translation as BLOCKED until the
translation entry is probed onto a struct device. When the struct device is
removed, the translation should be put back to BLOCKED.
Drivers that are able to work like this can set their release_domain to the
blocking domain, and the core code handles this work.
The exception is when the device has an IOMMU_RESV_DIRECT region, in which
case the OS should continuously allow translations for the given range. And
the core code generally prevents using a BLOCKED domain with this device.
Continue this logic for the device release and hoist some open coding from
drivers. If the device has dev->iommu->require_direct and the driver uses a
BLOCKED release_domain, override it to IDENTITY to preserve the semantics.
The only remaining required driver code for IOMMU_RESV_DIRECT should preset
an IDENTITY translation during early IOMMU startup for those devices.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Linus Torvalds [Sun, 26 Oct 2025 17:33:46 +0000 (10:33 -0700)]
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Linus Torvalds [Sun, 26 Oct 2025 17:29:45 +0000 (10:29 -0700)]
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Linus Torvalds [Sun, 26 Oct 2025 17:24:39 +0000 (10:24 -0700)]
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Linus Torvalds [Sun, 26 Oct 2025 16:57:18 +0000 (09:57 -0700)]
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Linus Torvalds [Sun, 26 Oct 2025 16:54:36 +0000 (09:54 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Linus Torvalds [Sun, 26 Oct 2025 16:44:36 +0000 (09:44 -0700)]
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Linus Torvalds [Sun, 26 Oct 2025 16:42:19 +0000 (09:42 -0700)]
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Linus Torvalds [Sun, 26 Oct 2025 16:40:16 +0000 (09:40 -0700)]
Merge tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Linus Torvalds [Sat, 25 Oct 2025 16:35:26 +0000 (09:35 -0700)]
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Linus Torvalds [Sat, 25 Oct 2025 16:31:13 +0000 (09:31 -0700)]
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
Linus Torvalds [Sat, 25 Oct 2025 01:50:15 +0000 (18:50 -0700)]
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
Linus Torvalds [Fri, 24 Oct 2025 23:43:08 +0000 (16:43 -0700)]
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
Linus Torvalds [Fri, 24 Oct 2025 22:51:24 +0000 (15:51 -0700)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
Linus Torvalds [Fri, 24 Oct 2025 22:48:08 +0000 (15:48 -0700)]
Merge tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
Linus Torvalds [Fri, 24 Oct 2025 19:48:19 +0000 (12:48 -0700)]
Merge tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
Linus Torvalds [Fri, 24 Oct 2025 19:44:31 +0000 (12:44 -0700)]
Merge tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
Linus Torvalds [Fri, 24 Oct 2025 19:40:51 +0000 (12:40 -0700)]
Merge tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
Linus Torvalds [Fri, 24 Oct 2025 18:17:38 +0000 (11:17 -0700)]
Merge tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
Linus Torvalds [Fri, 24 Oct 2025 18:15:17 +0000 (11:15 -0700)]
Merge tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
Linus Torvalds [Fri, 24 Oct 2025 18:01:40 +0000 (11:01 -0700)]
Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
Linus Torvalds [Fri, 24 Oct 2025 17:45:29 +0000 (10:45 -0700)]
Merge tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
Arnd Bergmann [Fri, 17 Oct 2025 14:08:24 +0000 (16:08 +0200)]
soc: officially expand maintainership team
Since Olof moved on from the soc tree maintenance, Arnd has mainly taken
care of the day-to-day activities around the SoC tree by himself, which
is generally not a good setup.
Krzysztof, Linus and Alexandre have volunteered to become co-maintainers
of the SoC tree, with the plan of taking turns to do merges and reviews
to spread the workload. In addition, Drew joins as another reviewer.
of_msi_xlate() is required by drivers that can be configured
as modular, export the symbol.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Cc: Rob Herring <robh@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251021124103.198419-4-lpieralisi@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Simona Vetter [Fri, 24 Oct 2025 11:39:21 +0000 (13:39 +0200)]
Merge tag 'drm-xe-fixes-2025-10-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Make madvise autoreset an explicit behavior requested by userspace
(Thomas Hellström)
Driver Changes:
- Drop XE_VMA flag conversion and ensure GPUVA flags are passed around
(homas Hellström)
- Fix missing wq allocation error checking (Matthew Brost)
Hao Ge [Thu, 23 Oct 2025 14:33:13 +0000 (22:33 +0800)]
slab: Fix obj_ext mistakenly considered NULL due to race condition
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com> Fixes: f7381b911640 ("slab: mark slab->obj_exts allocation failures unconditionally") Cc: <stable@vger.kernel.org> Signed-off-by: Hao Ge <gehao@kylinos.cn> Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Charles Keepax [Thu, 23 Oct 2025 15:49:01 +0000 (16:49 +0100)]
genirq/manage: Add buslock back in to enable_irq()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Charles Keepax [Thu, 23 Oct 2025 15:49:00 +0000 (16:49 +0100)]
genirq/manage: Add buslock back in to __disable_irq_nosync()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Charles Keepax [Thu, 23 Oct 2025 15:48:59 +0000 (16:48 +0100)]
genirq/chip: Add buslock back in to irq_set_handler()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097de8 ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()") Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Ming Lei [Fri, 24 Oct 2025 01:34:59 +0000 (09:34 +0800)]
io_uring: fix buffer auto-commit for multishot uring_cmd
Commit 620a50c92700 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com> Fixes: 620a50c92700 ("io_uring: uring_cmd: add multishot support") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bjorn Helgaas [Thu, 23 Oct 2025 18:06:26 +0000 (13:06 -0500)]
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree
platforms") enabled Clock Power Management and L1 PM Substates, but those
features depend on CLKREQ# and possibly other device-specific
configuration. We don't know whether CLKREQ# is supported, so we shouldn't
blindly enable Clock PM and L1 PM Substates.
Enable only ASPM L0s and L1, and only when both ends of the link advertise
support for them.
Fixes: f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Link: https://lore.kernel.org/r/db5c95a1-cf3e-46f9-8045-a1b04908051a@xenosoft.de/ Reported-by: FUKAUMI Naoki <naoki@radxa.com> Closes: https://lore.kernel.org/r/22594781424C5C98+22cb5d61-19b1-4353-9818-3bb2b311da0b@radxa.com/ Reported-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20251015101304.3ec03e6b@bootlin.com/ Reported-by: Diederik de Haas <diederik@cknow-tech.com> Closes: https://lore.kernel.org/r/DDJXHRIRGTW9.GYC2ULZ5WQAL@cknow-tech.com/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Tested-by: Diederik de Haas <diederik@cknow-tech.com> Acked-by: Dragan Simic <dsimic@manjaro.org> Link: https://patch.msgid.link/20251023180645.1304701-1-helgaas@kernel.org
Stephen Rothwell [Wed, 22 Oct 2025 05:36:25 +0000 (16:36 +1100)]
MAINTAINERS: add Mark Brown as a linux-next maintainer
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Oct 2025 23:50:25 +0000 (16:50 -0700)]
Merge tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Arnd Bergmann [Thu, 23 Oct 2025 20:30:29 +0000 (22:30 +0200)]
Merge tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Arnd Bergmann [Thu, 23 Oct 2025 20:30:01 +0000 (22:30 +0200)]
Merge tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Arnd Bergmann [Thu, 23 Oct 2025 20:29:39 +0000 (22:29 +0200)]
Merge tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Linus Torvalds [Thu, 23 Oct 2025 19:26:47 +0000 (09:26 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
Linus Torvalds [Thu, 23 Oct 2025 17:03:18 +0000 (07:03 -1000)]
Merge tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Linus Torvalds [Thu, 23 Oct 2025 16:53:12 +0000 (06:53 -1000)]
Merge tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Linus Torvalds [Thu, 23 Oct 2025 16:48:32 +0000 (06:48 -1000)]
Merge tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Linus Torvalds [Thu, 23 Oct 2025 16:44:43 +0000 (06:44 -1000)]
Merge tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Catalin Marinas [Wed, 22 Oct 2025 10:09:14 +0000 (11:09 +0100)]
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org # 6.12.x Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Vlastimil Babka [Thu, 23 Oct 2025 12:01:07 +0000 (14:01 +0200)]
slab: fix slab accounting imbalance due to defer_deactivate_slab()
Since commit af92793e52c3 ("slab: Introduce kmalloc_nolock() and
kfree_nolock().") there's a possibility in alloc_single_from_new_slab()
that we discard the newly allocated slab if we can't spin and we fail to
trylock. As a result we don't perform inc_slabs_node() later in the
function. Instead we perform a deferred deactivate_slab() which can
either put the unacounted slab on partial list, or discard it
immediately while performing dec_slabs_node(). Either way will cause an
accounting imbalance.
Fix this by not marking the slab as frozen, and using free_slab()
instead of deactivate_slab() for non-frozen slabs in
free_deferred_objects(). For CONFIG_SLUB_TINY, that's the only possible
case. By not using discard_slab() we avoid dec_slabs_node().
When we do mlx5e_detach_netdev() we eventually disable blocking events
notifier, among those events are IPsec MPV events from IB to core.
So before disabling those blocking events, make sure to also unregister
the devcom device and mark all this device operations as complete,
in order to prevent the other device from using invalid netdev
during future devcom events which could cause the trace below.
net/mlx5: Refactor devcom to return NULL on failure
Devcom device and component registration isn't always critical to the
functionality of the caller, hence the registration can fail and we can
continue working with an ERR_PTR value saved inside a variable.
In order to avoid that make sure all devcom failures return NULL.
projects / thirdparty / kernel / linux.git / log
