Biju Das [Tue, 15 Aug 2023 07:34:45 +0000 (08:34 +0100)]
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
As per kernel documentation, use raw_spinlock_t only in real critical core
code, low-level interrupt handling, and places where disabling preemption
or interrupts is required. Here the lock is for concurrent register access
from different drivers, hence spin_lock() is sufficient.
Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZIL%2FitcJvV5s3Bnf@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Pavel Machek <pavel@denx.de> Link: https://lore.kernel.org/r/20230815073445.9579-3-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
Biju Das [Tue, 15 Aug 2023 07:34:44 +0000 (08:34 +0100)]
mfd: rz-mtu3: Reduce critical sections
Reduce critical sections on rz_mtu3_start_stop_ch() and
rz_mtu3_is_enabled() by moving offset and bitpos computation
outside the critical section and drop the 'ret' variable on
rz_mtu3_is_enabled() and return 'tstr & BIT(bitpos)' directly.
Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZIMAse1ikTuycJ02@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Pavel Machek <pavel@denx.de> Link: https://lore.kernel.org/r/20230815073445.9579-2-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
Since the commit 92d82d76c842 ("mfd: ipaq-micro: Use %*ph for printing
hexdump of a small buffer"), the variable 'i' is unused. Remove it to
silence the warning.
Reported-by: kernelci.org bot <bot@kernelci.org> Closes: https://lore.kernel.org/all/64c8aeac.170a0220.e3234.2745@mx.google.com/ Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230817114505.1810920-1-lizetao1@huawei.com Signed-off-by: Lee Jones <lee@kernel.org>
Alexander Stein [Tue, 1 Aug 2023 08:51:58 +0000 (10:51 +0200)]
MAINTAINERS: Add entry for TQ-Systems device trees and drivers
This includes the arm & arm64 module + board DT files as well as x86
platform GPIO drivers.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230801085158.87735-1-alexander.stein@ew.tq-group.com Signed-off-by: Lee Jones <lee@kernel.org>
max77686_irq_init() and max77686_irq_exit() are not used since
commit 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq").
And max77686_irq_resume() never be implemented since introduced in
commit dae8a969d512 ("mfd: Add Maxim 77686 driver").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20230728132709.27052-1-yuehaibing@huawei.com Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: stericsson,db8500-prcmu: Add missing unevaluatedProperties for each regulator
Each regulator node, which references common regulator.yaml schema,
should disallow additional or unevaluated properties. Otherwise
mistakes in properties will go unnoticed.
dt-bindings: mfd: st,stpmic1: Merge patterns for nodes
Properties should be described only once, thus having separate pattern
for children just to specify the $ref to regulator.yaml is not correct.
It also makes impossible to finish it with
additional/unevaluatedProperties:false to restrict allowed properties in
regulator node.
Merge the patterns, so each regulator subnode has regulator.yaml $ref,
additional properties and ends with additionalProperties:false. This
points to missing regulator-min/max-microvolt in LDO4 node.
There's no need for 'additionalProperties' in the if/then schema as there's
already 'unevaluatedProperties' in the parent schema. With
'additionalProperties' dropped, 'compatible' and 'phandle' don't need
to be listed in the conditional schemas as 'compatible' is already in
the main section and 'phandle' will be implicitly added.
dt-bindings: mfd: maxim,max77693: Add USB connector
Add micro-USB connector under "muic" node to properly represent the
hardware. Deprecate also the old "max77693-muic" in favor of generic
"muic" (this is max77693, so there is no need to state it in its child
nodes). This "muic" node is used only to instantiate MUIC driver by
compatible, thus actual Linux driver changes are needed. Extend the
example with this new code.
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Chengfeng Ye [Thu, 20 Jul 2023 07:13:30 +0000 (07:13 +0000)]
mfd: qcom-pm8xxx: Fix potential deadlock on &chip->pm_irq_lock
As &chip->pm_irq_lock is acquired by pm8xxx_irq_handler() under irq
context, other process context code should disable irq before acquiring
the lock.
Since .irq_set_type and .irq_get_irqchip_state callbacks are generally
executed from process context without irq disabled by default, the same
lock acquision should disable irq.
Biju Das [Tue, 18 Jul 2023 13:43:14 +0000 (14:43 +0100)]
mfd: rz-mtu3: Fix COMPILE_TEST build error
When (MFD) RZ_MTU3=m and PWM_RZ_MTU3=y, It hits the below error
aarch64-linux-gnu-ld: rz-mtu3.c:(.text+0x544): undefined reference to `mfd_remove_devices'
Fix this issue by selecting MFD_CORE.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Closes: https://lore.kernel.org/linux-pwm/20230718090023.wo6m6ffzaifgctkj@pengutronix.de/ Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230718134314.118333-1-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
Rob Herring [Fri, 14 Jul 2023 17:47:27 +0000 (11:47 -0600)]
mfd: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Mark Brown [Thu, 13 Jul 2023 00:49:29 +0000 (01:49 +0100)]
mfd: wm8998: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8998 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:28 +0000 (01:49 +0100)]
mfd: wm8997: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8997 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:27 +0000 (01:49 +0100)]
mfd: wm8994: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8994 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:26 +0000 (01:49 +0100)]
mfd: wm5110: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm5110 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:25 +0000 (01:49 +0100)]
mfd: wm5102: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm5102 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:24 +0000 (01:49 +0100)]
mfd: cs47l92: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l92 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:23 +0000 (01:49 +0100)]
mfd: cs47l90: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l90 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:22 +0000 (01:49 +0100)]
mfd: cs47l85: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l85 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:21 +0000 (01:49 +0100)]
mfd: cs47l35: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l35 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:20 +0000 (01:49 +0100)]
mfd: cs47l24: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l24 driver to use the more modern data structure.
Mark Brown [Thu, 13 Jul 2023 00:49:19 +0000 (01:49 +0100)]
mfd: cs47l15: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs47l15 driver to use the more modern data structure.
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint. Also absolute path
starting with /schemas is preferred.
Mark Brown [Wed, 12 Jul 2023 11:14:43 +0000 (12:14 +0100)]
mfd: axp20x: Update to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the axp20x driver to use the more modern data structure, really it
should have been fine even without the most recent round of updates.
dt-bindings: mfd: Add bindings for SAM9X75 LCD controller
Add new compatible string for the XLCD controller on sam9x75 variant
of the SAM9X7 SoC family.
The XLCD controller in sam9x75 variant supports interfacing with
LVDS and MIPI-DSI and parallel port RGB.
This converts the STMPE MFD device tree bindings to the YAML
schema.
Reference the existing schema for the ADC, just define the
other subnode schemas directly in the MFD schema.
Add two examples so we have examples covering both the simple
GPIO expander and the more complex with ADC and touchscreen.
Some in-tree users do not follow the naming conventions for nodes
so these DTS files need to be augmented to use proper node names
like "adc", "pwm", "gpio", "keyboard-controller" etc before the
bindings take effect on them.
Yangtao Li [Thu, 6 Jul 2023 11:39:38 +0000 (19:39 +0800)]
mfd: stm32-timers: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yangtao Li [Thu, 6 Jul 2023 11:39:35 +0000 (19:39 +0800)]
mfd: ti_am335x_tscadc: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Andre Werner [Fri, 18 Aug 2023 08:37:21 +0000 (10:37 +0200)]
mfd: tps65086: Read DEVICE ID register 1 from device
This commit prepares a following commit for the regulator part of the MFD.
The driver should support different device chips that differ in their
register definitions, for instance to control LDOA1 and SWB2.
So it is necessary to use a dedicated regulator description for a
specific device variant. Thus, the content from DEVICEID Register 1 is
used to choose a dedicated configuration between the different device
variants.
Charles Keepax [Fri, 4 Aug 2023 10:46:00 +0000 (11:46 +0100)]
pinctrl: cs42l43: Add support for the cs42l43
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Charles Keepax [Fri, 4 Aug 2023 10:45:59 +0000 (11:45 +0100)]
mfd: cs42l43: Add support for cs42l43 core driver
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides
PM/system power management.
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Lucas Tanure [Fri, 4 Aug 2023 10:45:57 +0000 (11:45 +0100)]
soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
Currently the in-band alerts for SoundWire peripherals can only
be communicated to the driver through the interrupt_callback
function. This however is slightly inconvenient for devices that wish
to share IRQ handling code between SoundWire and I2C/SPI, the later
would normally register an IRQ handler with the IRQ subsystem. However
there is no reason the SoundWire in-band IRQs can not also be
communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ
handler to receive SoundWire in-band alerts, allowing code to be
shared across control buses. Note that we allow users to use both the
interrupt_callback and the IRQ handler, this is useful for devices
which must clear additional chip specific SoundWire registers that are
not a part of the normal IRQ flow, or the SoundWire specification.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230804104602.395892-2-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Merge tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
mm: lock newly mapped VMA which can be modified after it becomes visible
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
Merge tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
Merge tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Check for NULL bdev in LoadPin (Matthias Kaehlcke)
- Revert unwanted KUnit FORTIFY build default
- Fix 1-element array causing boot warnings with xhci-hub
* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Revert "fortify: Allow KUnit test to build without FORTIFY"
dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used"
* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
perf test: Fix event parsing test on Arm
perf evsel amd: Fix IBS error message
perf: unwind: Fix symfs with libdw
perf symbol: Fix uninitialized return value in symbols__find_by_name()
perf test: Test perf lock contention CSV output
perf lock contention: Add --output option
perf lock contention: Add -x option for CSV style output
perf lock: Remove stale comments
perf vendor events intel: Update tigerlake to 1.13
perf vendor events intel: Update skylakex to 1.31
perf vendor events intel: Update skylake to 57
perf vendor events intel: Update sapphirerapids to 1.14
perf vendor events intel: Update icelakex to 1.21
perf vendor events intel: Update icelake to 1.19
perf vendor events intel: Update cascadelakex to 1.19
perf vendor events intel: Update meteorlake to 1.03
perf vendor events intel: Add rocketlake events/metrics
perf vendor metrics intel: Make transaction metrics conditional
perf jevents: Support for has_event function
...
The tests that don't use expect_eq() macro to determine that a test
is failured must increment failed_tests explicitly.
- lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic
on 32-bit LE architectures when it's wired to
bitmap_copy_clear_tail().
- nodemask: Drop duplicate check in for_each_node_mask()
As the return value type of first_node() became unsigned, the node
>= 0 became unnecessary.
- cpumask: fix function description kernel-doc notation
- MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record
Add linux/bits.h and linux/bitfield.h for visibility"
* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
MAINTAINERS: Add bitfield.h to the BITMAP API record
MAINTAINERS: Add bits.h to the BITMAP API record
cpumask: fix function description kernel-doc notation
nodemask: Drop duplicate check in for_each_node_mask()
lib/bitmap: drop optimization of bitmap_{from,to}_arr64
lib/test_bitmap: increment failure counter properly
Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.
However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature. Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.
To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether. Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook. Common slab code
seems like a more appropriate place for a slub_debug check anyway.
Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Will Deacon <will@kernel.org> Acked-by: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: kasan-dev@googlegroups.com Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.
As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.
Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).
I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.
projects / thirdparty / kernel / linux.git / log
