Vishnu Reddy [Mon, 10 Nov 2025 07:24:29 +0000 (12:54 +0530)]
media: iris: Change psc properties message to debug level
The message for attempting to set already configured input or output
parameter subscribe change properties is not an error condition.
Move it from error to debug level and make it more descriptive by
indicating which specific input or output psc was already set.
Ricardo Ribalda [Tue, 23 Dec 2025 10:02:57 +0000 (10:02 +0000)]
media: iris: Document difference in size during allocation
As we get ready for kzalloc checking for invalid sizes, let's add
documentation for the cases where the size is different but valid.
This patch fixes this cocci warning:
./platform/qcom/iris/iris_hfi_gen2_command.c:1215:9-25: WARNING: casting value returned by memory allocation function to (struct iris_inst *) is useless.
Vishnu Reddy [Mon, 29 Dec 2025 06:31:25 +0000 (12:01 +0530)]
media: iris: Prevent output buffer queuing before stream-on completes
During normal playback, stream-on for input is followed by output, and
only after input stream-on does actual streaming begin. However, when
gst-play performs a seek, both input and output streams are stopped,
and on restart, output stream-on occurs first. At this point, firmware
has not yet started streaming. Queuing output buffers before the firmware
begins streaming causes it to process buffers in an invalid state, leading
to an error response. These buffers are returned to the driver as errors,
forcing the driver into an error state and stopping playback.
Fix this by deferring output buffer queuing until stream-on completes.
Input buffers can still be queued before stream-on as required.
Fixes: 92e007ca5ab6 ("media: iris: Add V4L2 streaming support for encoder video device") Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com> Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Dikshita Agarwal [Mon, 29 Dec 2025 06:31:24 +0000 (12:01 +0530)]
media: iris: gen2: Add sanity check for session stop
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that.
Dikshita Agarwal [Mon, 29 Dec 2025 06:31:22 +0000 (12:01 +0530)]
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware.
Dikshita Agarwal [Mon, 29 Dec 2025 06:31:21 +0000 (12:01 +0530)]
media: iris: Skip resolution set on first IPSC
The resolution property is not supposed to be set during reconfig.
Existing iris_drc_pending(inst) check is insufficient, as it doesn't
cover the first port setting change.
Extend the conditional check to also skip resolution setting when
the instance is in IRIS_INST_SUB_FIRST_IPSC.
Dikshita Agarwal [Mon, 29 Dec 2025 06:31:20 +0000 (12:01 +0530)]
media: iris: Add buffer to list only after successful allocation
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers.
Dikshita Agarwal [Thu, 18 Dec 2025 06:54:09 +0000 (12:24 +0530)]
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails.
Fixes: a5925a2ce077 ("media: iris: add VPU33 specific encoding buffer calculation") Fixes: a6882431a138 ("media: iris: Add support for ENUM_FRAMESIZES/FRAMEINTERVALS for encoder") Cc: stable@vger.kernel.org Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: iris: remove v4l2_m2m_ioctl_{de,en}coder_cmd API usage during STOP handling
Currently v4l2_m2m_ioctl_{de,enc}coder_cmd is being invoked during STOP
command handling. However, this is not required as the iris driver has
its own drain and stop handling mechanism in place.
Using the m2m command API in this context leads to incorrect behavior,
where the LAST flag is prematurely attached to a capture buffer,
when there are no buffers in m2m source queue. But, in this scenario
even though the source buffers are returned to client, hardware might
still need to process the pending capture buffers.
Attaching LAST flag prematurely can result in the capture buffer being
removed from the destination queue before the hardware has finished
processing it, causing issues when the buffer is eventually returned by
the hardware.
To prevent this, remove the m2m API usage in stop handling.
Fixes: d09100763bed ("media: iris: add support for drain sequence") Fixes: 75db90ae067d ("media: iris: Add support for drain sequence in encoder video device") Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Val Packett [Thu, 25 Dec 2025 23:09:10 +0000 (20:09 -0300)]
media: iris: use fallback size when S_FMT is called without width/height
According to 4.5.1.5 of the M2M stateful decoder UAPI documentation,
providing the width and the height to S_FMT is "required only if it
cannot be parsed from the stream", otherwise they can be left as 0
and the S_FMT implementation is expected to return a valid placeholder
resolution that would let REQBUFS succeed.
iris was missing the fallback, so clients like rpi-ffmpeg wouldn't work.
Fix by adding an explicit fallback to defaults.
Fixes: b530b95de22c ("media: iris: implement s_fmt, g_fmt and try_fmt ioctls") Link: https://github.com/jc-kynesim/rpi-ffmpeg/issues/103 Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Signed-off-by: Val Packett <val@packett.cool> Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Tue, 23 Dec 2025 10:02:58 +0000 (10:02 +0000)]
media: iris: Fix fps calculation
iris_venc_s_param() uses do_div to divide two 64 bits operators, this is
wrong. Luckily for us, both of the operators fit in 32 bits, so we can use
a normal division.
Now that we are at it, mark the fps smaller than 1 as invalid, the code
does not seem to handle them properly.
The following cocci warning is fixed with this patch:
./platform/qcom/iris/iris_venc.c:378:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Fixes: 4ff586ff28e3 ("media: iris: Add support for G/S_PARM for encoder video device") Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Vishnu Reddy [Mon, 6 Oct 2025 09:18:19 +0000 (14:48 +0530)]
media: iris: Fix ffmpeg corrupted frame error
When the ffmpeg decoder is running, the driver receives the
V4L2_BUF_FLAG_KEYFRAME flag in the input buffer. The driver then forwards
this flag information to the firmware. The firmware, in turn, copies the
input buffer flags directly into the output buffer flags. Upon receiving
the output buffer from the firmware, the driver observes that the buffer
contains the HFI_BUFFERFLAG_DATACORRUPT flag. The root cause is that both
V4L2_BUF_FLAG_KEYFRAME and HFI_BUFFERFLAG_DATACORRUPT are the same value.
As a result, the driver incorrectly interprets the output frame as
corrupted, even though the frame is actually valid. This misinterpretation
causes the driver to report an error and skip good frames, leading to
missing frames in the final video output and triggering ffmpeg's "corrupt
decoded frame" error.
To resolve this issue, the input buffer flags should not be sent to the
firmware during decoding, since the firmware does not require this
information.
Revert the check that skipped stop_streaming when the instance was in
IRIS_INST_ERROR, as it caused multiple regressions:
1. Buffers were not returned to vb2 when the instance was already in
error state, triggering warnings in the vb2 core because buffer
completion was skipped.
2. If a session failed early (e.g. unsupported configuration), the
instance transitioned to IRIS_INST_ERROR. When userspace attempted
to stop streaming for cleanup, stop_streaming was skipped due to the
added check, preventing proper teardown and leaving the firmware
in an inconsistent state.
media: venus: assign unique bus_info strings for encoder and decoder
The Venus encoder and decoder video devices currently report the same
bus_info string ("platform:qcom-venus").
Assign unique bus_info identifiers by appending ":dec" and ":enc" to the
parent device name. With this change v4l2-ctl will display two separate
logical devices
Dikshita Agarwal [Tue, 25 Nov 2025 05:34:19 +0000 (11:04 +0530)]
media: venus: vdec: restrict EOS addr quirk to IRIS2 only
On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could
not handle a dummy device address for EOS buffers, so a NULL device
address is sent instead. The existing check used IS_V6() alongside a
firmware version gate:
However, SC7280 which is also V6, uses a firmware string of the form
"1.0.<commit-hash>", which the version parser translates to 1.0.0. This
unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)`
condition on SC7280. Combined with IS_V6() matching there as well, the
quirk is incorrectly applied to SC7280, causing VP9 decode failures.
Constrain the check to IRIS2 (SM8250) only, which is the only platform
that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This
restores correct behavior on SC7280 (no forced NULL EOS buffer address).
Fixes: 47f867cb1b63 ("media: venus: fix EOS handling in decoder stop command") Cc: stable@vger.kernel.org Reported-by: Mecid <mecid@mecomediagroup.de> Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222 Co-developed-by: Renjiang Han <renjiang.han@oss.qualcomm.com> Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com> Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com> Tested-by: Renjiang Han <renjiang.han@oss.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Renjiang Han [Thu, 11 Dec 2025 09:50:39 +0000 (15:20 +0530)]
media: venus: vdec: fix error state assignment for zero bytesused
When hfi_session_flush is issued, all queued buffers are returned to
the V4L2 driver. Some of these buffers are not processed and have
bytesused = 0. Currently, the driver marks such buffers as error even
during drain operations, which can incorrectly flag EOS buffers.
Only capture buffers with zero payload (and not EOS) should be marked
with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS
branch to ensure correct handling.
Fixes: 51df3c81ba10b ("media: venus: vdec: Mark flushed buffers with error state") Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com> Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Martin Tůma [Fri, 16 Jan 2026 12:55:54 +0000 (13:55 +0100)]
media: pci: mgb4: Add support for GMSL3 coaxial modules
Add support for GMSL3 modules with a coaxial interface, a variant of the
already existing module with the id #4. The FW is the same as for all other
GMSL3 modules.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Return 0 from disable_streams, use div_u64() instead of do_div(), use
dev_dbg() for a debug message and move loop variable definition into the
loop itself.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:43 +0000 (23:44 +0100)]
media: i2c: ov9282: dynamic flash_duration maximum
This patch sets the current exposure time as maximum for the
flash_duration control. As Flash/Strobes which are longer than the
exposure time have no effect.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Some lines rewrapped.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:42 +0000 (23:44 +0100)]
media: i2c: ov9282: implement try_ctrl for strobe_duration
As the granularity of the hardware supported values is lower than the
control value, implement a try_ctrl() function for
V4L2_CID_FLASH_DURATION. This function calculates the nearest possible
µs strobe duration for the given value and returns it back to the
caller.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:41 +0000 (23:44 +0100)]
media: i2c: ov9282: add strobe_duration v4l2 control
Add V4L2_CID_FLASH_DURATION support using the "strobe_frame_span"
feature of the sensor. This is implemented by transforming the given µs
value by an interpolated formula to a "span step width" value and
writing it to register PWM_CTRL_25, PWM_CTRL_26, PWM_CTRL_27,
PWM_CTRL_28 (0x3925, 0x3926, 0x3927, 0x3928).
The maximum control value is set to the period of the current default
framerate.
All register values are based on the OV9281 datasheet v1.53 (jan 2019)
and tested using an ov9281 VisionComponents module.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Remove redundant assignment of ret, declare ret as last.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:40 +0000 (23:44 +0100)]
media: i2c: ov9282: add strobe output enable v4l2 control
Add V4L2_CID_FLASH_STROBE_OE enable/disable support using the
"strobe output enable" feature of the sensor.
All values are based on the OV9281 datasheet v1.53 (january 2019) and
tested using an ov9281 VisionComponents module.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add #define's for the output enable registers (0x3004, 0x3005, 0x3006),
also known as SC_CTRL_04, SC_CTRL_05, SC_CTRL_04. Use those register
definitions instead of the raw values in the `common_regs` struct.
All values are based on the OV9281 datasheet v1.53 (january 2019).
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the new strobe duration and hardware strobe output enable to v4l
uAPI documentation. Additionally add labels for cross-referencing v4l
controls.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:37 +0000 (23:44 +0100)]
media: v4l: ctrls: add a control for enabling strobe output
Add a control V4L2_CID_FLASH_STROBE_OE to en- or disable the
strobe output of v4l2 devices (most likely sensors).
Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Richard Leitner [Tue, 9 Dec 2025 22:44:36 +0000 (23:44 +0100)]
media: v4l: ctrls: add a control for flash/strobe duration
Add a V4L2_CID_FLASH_DURATION control to set the duration of a
flash/strobe pulse. This controls the length of the flash/strobe pulse
output by device (typically a camera sensor) and connected to the flash
controller. This is different to the V4L2_CID_FLASH_TIMEOUT control,
which is implemented by the flash controller and defines a limit after
which the flash is "forcefully" turned off again.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Laurent Pinchart [Fri, 18 Aug 2023 23:40:28 +0000 (02:40 +0300)]
media: i2c: imx219: Inline imx219_update_pad_format() in its caller
The imx219_update_pad_format() is short and called from a single place,
in imx219_set_pad_format(). Inline the code in the caller to keep all
format adjustments grouped in a single place and improve readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Wed, 6 Sep 2023 08:04:31 +0000 (11:04 +0300)]
media: ccs: Rely on sub-device state locking
Rely on sub-device state locking to serialise access to driver's data
structures. The driver-provided mutex is used as the state lock for all
driver sub-devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Mon, 25 Sep 2023 08:23:08 +0000 (11:23 +0300)]
media: ccs: Remove ccs_get_crop_compose helper
As it's now easier to obtain the necessary information on crop and compose
rectangles after moving to sub-device state, remove the
ccs_get_crop_compose helper.
Also remove the comp arguments of the compose goodness calculators and
make related local variables and function arguments const where
applicable.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The struct dcmipp_bytecap_device embeds a cmier variable which is
actually only set once and then used in several places for interrupt
mask or interrupt enable/disable. Use the DCMIPP_CMIER_P0ALL
bitfield macro directly instead of using it through the cmier
variable.
There is also no need to mask again vcap->cmsr2 against enabled
interrupts bit since this has already been done when storing the
interrupt status into the cmsr2 variable.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alain Volmat [Fri, 19 Dec 2025 14:30:39 +0000 (15:30 +0100)]
media: stm32: dcmipp: byteproc: only allow compose with 8/16bit fmts
Since the byteproc is working at byte level, it is not possible to
perform decimation with formats other than 8 or 16 bit per pixel.
Ensure any other format won't be able to set a compose.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alain Volmat [Fri, 19 Dec 2025 14:30:35 +0000 (15:30 +0100)]
media: stm32: dcmipp: bytecap: clear all interrupts upon stream stop
Ensure that there are no pending interrupts after we have stopped the
pipeline. Indeed, it could happen that new interrupt has been generated
during the stop_streaming processing hence clear them in order to avoid
getting a new interrupt right from the start of a next start_streaming.
Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver") Cc: stable@vger.kernel.org Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
adv7604 and et8ek8 sensor drivers have mixed up logical and line level
for reset/powerdown signal. They call it a reset signal (it indeed
behaves like that), but drivers assert the reset to operate which is
clearly incorrect and relies on wrong ACTIVE_HIGH flag in the DTS.
People in discussions copy existing poor code and claim they can repeat
same mistake, so add a note to prevent that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alain Volmat [Mon, 15 Dec 2025 12:10:19 +0000 (13:10 +0100)]
media: stm32: dcmipp: avoid naming clock if only one is needed
When DCMIPP requires only a single clock (kclk), avoid relying on its
name to obtain it. The introduction of MP25 support added the mclk,
which necessitated naming the first clock kclk. However, this breaks
backward compatibility with existing MP13 device trees that do not
specify clock names.
Fixes: 686f27f7ea37 ("media: stm32: dcmipp: add core support for the stm32mp25") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Cc: Stable@vger.kernel.org # 6.14.x: 7f487562af49 media: stm32: dcmipp: correct ret type in dcmipp_graph_notify_bound Cc: Stable@vger.kernel.org # 6.14.x: c715dd62da30 media: stm32: dcmipp: add has_csi2 & needs_mclk in match data Cc: Stable@vger.kernel.org # 6.14.x: Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Frank Li [Mon, 15 Dec 2025 15:19:30 +0000 (10:19 -0500)]
MAINTAINERS: Promote Frank Li as i.MX7/8 media maintainer
Move Rui Miguel Silva to reviewer since he does not have sufficient time to
maintain i.MX7/8 media drivers. Frank Li has the hardware, complete
documentation, and has participated actively in patch review. Promote him
as the i.MX7/8 media drivers maintainer.
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: ccs: Accommodate C-PHY into the calculation
We need to set correct mode for PLL to calculate correct frequency.
Signalling mode is known at this point, so use it for that.
Fixes: 47b6eaf36eba ("media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY") Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: David Heidelberg <david@ixit.cz>
[Sakari Ailus: Drop extra newline.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Fri, 9 Jan 2026 08:53:40 +0000 (10:53 +0200)]
media: ccs: Clean up ccs_get_hwcfg() a little
Fix coding style issues and do other small cleanups in ccs_get_hwcfg().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xiaolei Wang [Thu, 8 Jan 2026 05:21:58 +0000 (13:21 +0800)]
media: i2c: ov5647: Switch to using the sub-device state lock
Switch to using the sub-device state lock and properly call
v4l2_subdev_init_finalize() / v4l2_subdev_cleanup() on probe() /
remove().
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
[Sakari Ailus: Remove now-redundant assignment of control handler lock.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xiaolei Wang [Thu, 8 Jan 2026 05:21:57 +0000 (13:21 +0800)]
media: i2c: ov5647: Convert to CCI register access helpers
Use the new common CCI register access helpers to replace the private
register access helpers in the ov5647 driver. This simplifies the driver
by reducing the amount of code.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Even if a video device is part of a pipeline already,
video_device_pipeline_alloc_start() handles that case gracefully. Don't
explicitly differentiate between video_device_pipeline_start() and
video_device_pipeline_alloc_start() based on the existence of a pipeline.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Mon, 10 Nov 2025 11:26:57 +0000 (13:26 +0200)]
media: ipu6: Drop custom functions to obtain sd state information
Drop the custom functions that are used to obtain information from the
sub-device state.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Fri, 7 Nov 2025 08:03:15 +0000 (10:03 +0200)]
media: ipu6: Remove source_entity from struct ipu6_isys_stream
Remove source_entity from struct ipu6_isys_stream and instead pass it on
in function arguments.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Thu, 6 Nov 2025 09:56:40 +0000 (11:56 +0200)]
media: ipu6: Obtain unique source pad from remote sub-device
Obtain unique source pad from a remote sub-device, instead of the first
one. This means that only one link may be active at stream start. There's
no functional change in practice, unless multiple CSI-2 transmitters are
directly connected to the receiver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Tue, 25 Nov 2025 13:27:54 +0000 (15:27 +0200)]
media: ipu6: Obtain remote pad using media_pad_remote_pad_unique()
There's no reason to use media_entity_remote_source_pad_unique() as we
know our pads. Use media_pad_remote_pad_unique() instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Tue, 4 Nov 2025 09:53:55 +0000 (11:53 +0200)]
media: ipu6: Drop error argument from ipu6_isys_stream_start()
error argument for ipu6_isys_stream_start() is always false, remove the
argument. The IPU6_ISYS_BUFFER_LIST_FL_SET_STATE buffer flag also becomes
redundant as a result, remove it as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Wed, 7 Jan 2026 21:55:31 +0000 (23:55 +0200)]
media: ipu6: Always close firmware stream
Close the firmware stream even when disabling a stream on an upstream
sub-device fails. This allows the firmware to release resources related to
a stream that is stopped in any case.
Suggested-by: Bingbu Cao <bingbu.cao@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Wed, 17 Dec 2025 22:05:38 +0000 (00:05 +0200)]
media: ipu6: Close firmware streams on streaming enable failure
When enabling streaming fails, the stream is stopped in firmware but not
closed. Do this to release resources on firmware side.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Fri, 7 Nov 2025 10:46:51 +0000 (12:46 +0200)]
media: ipu6: Don't check pipeline in stream_start
A pipeline exists when start_streaming has returned so the check for
start_streaming_called is equivalent to having media_pipeline. Use
vb2_start_streaming_called() to perform the check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Thu, 30 Oct 2025 10:01:48 +0000 (12:01 +0200)]
media: ipu6: Remove redundant streaming start via buffer queueing
The videobuf2 framework will ensure buffers are queued before streaming is
started. Remove support for starting streaming via the buf_queue()
callback.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Wed, 3 Dec 2025 08:27:28 +0000 (10:27 +0200)]
media: ipu6: Make symbols static
Make isys_setup_hw and isys_isr static as they're only used in a single
file.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Thu, 18 Dec 2025 22:52:43 +0000 (00:52 +0200)]
media: ipu6: Remove redundant driver data checks
Both runtime PM resume and suspend callbacks check whether the driver's
data is set for the device. This is done in probe(); drop the redundant
checks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Thu, 18 Dec 2025 22:54:35 +0000 (00:54 +0200)]
media: ipu6: Drop MMU hardware initialisation in probe()
The MMU hardware is initialised and cleaned up in the runtime PM resume
callbacks. Do not do this in probe().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Thu, 27 Nov 2025 12:14:22 +0000 (14:14 +0200)]
media: ipu6: Ensure stream_mutex is acquired when dealing with node list
The ipu6 isys driver maintains the list of video buffer queues related to
a stream (in ipu6 context streams on the same CSI-2 virtual channel) and
this list is modified through VIDIOC_STREAMON and VIDIOC_STREAMOFF IOCTLs.
Ensure the common mutex is acquired when accessing the linked list, i.e.
the isys device context's stream_mutex.
Add a lockdep assert to ipu6_isys_get_buffer_list() and switch to guard()
while at it as the error handling becomes more simple this way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bingbu Cao [Tue, 23 Dec 2025 07:23:03 +0000 (15:23 +0800)]
media: staging/ipu7: Fix the loop bound in l2 table alloc
This patch fixes the incorrect loop bound in alloc_l2_pt(). When
initializing L2 page table entries, the loop was incorrectly using
ISP_L1PT_PTES instead of ISP_L2PT_PTES though the ISP_L1PT_PTES is
equal to ISP_L2PT_PTES.
Fixes: 71d81c25683a ("media: staging/ipu7: add IPU7 DMA APIs and MMU mapping") Cc: stable@vger.kernel.org Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some CPHY settings needs to updated according to the latest guide from
SNPS. This patch program 45ohm for tuning resistance to fix CPHY problem
and update the ITMINRX and GMODE for CPHY.
Cc: Stable@vger.kernel.org Fixes: a516d36bdc3d ("media: staging/ipu7: add IPU7 input system device driver") Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bingbu Cao [Tue, 23 Dec 2025 07:23:01 +0000 (15:23 +0800)]
media: staging/ipu7: Call synchronous RPM suspend in probe failure
If firmware authentication failed during driver probe, driver call an
asynchronous API to suspend the psys device but the bus device will be
removed soon, thus runtime PM of bus device will be disabled soon, that
will cancel the suspend request, so use synchronous suspend to make
sure the runtime suspend before disabling its RPM.
IPU7 hardware has constraints that the PSYS device must be powered off
before ISYS, otherwise it will cause machine check error.
Cc: Stable@vger.kernel.org Fixes: b7fe4c0019b1 ("media: staging/ipu7: add Intel IPU7 PCI device driver") Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bingbu Cao [Tue, 23 Dec 2025 07:23:00 +0000 (15:23 +0800)]
media: staging/ipu7: Ignore interrupts when device is suspended
IPU7 devices have shared interrupts with others. In some case when IPU7
device is suspended, driver get unexpected interrupt and invalid irq
status 0xffffffff from ISR_STATUS and PB LOCAL_STATUS registers as
interrupt is triggered from other device on shared irq line.
In order to avoid this issue use pm_runtime_get_if_active() to check if
IPU7 device is resumed, ignore the invalid irq status and use
synchronize_irq() in suspend.
Cc: Stable@vger.kernel.org Fixes: b7fe4c0019b1 ("media: staging/ipu7: add Intel IPU7 PCI device driver") Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bingbu Cao [Tue, 23 Dec 2025 07:22:59 +0000 (15:22 +0800)]
media: ipu6: Fix RPM reference leak in probe error paths
Several error paths in ipu6_pci_probe() were jumping directly to
out_ipu6_bus_del_devices without releasing the runtime PM reference.
Add pm_runtime_put_sync() before cleaning up other resources.
Cc: Stable@vger.kernel.org Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver") Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bingbu Cao [Tue, 23 Dec 2025 07:22:58 +0000 (15:22 +0800)]
media: ipu6: Fix typo and wrong constant in ipu6-mmu.c
Fix two coding errors in ipu6-mmu.c:
1. Fix syntax error in page_table_dump() where the closing parenthesis
and semicolon were swapped in the TBL_PHYS_ADDR macro call.
2. Fix incorrect loop bound in alloc_l2_pt(). When initializing L2 page
table entries, the loop was incorrectly using ISP_L1PT_PTES instead
of ISP_L2PT_PTES.
Fixes: 9163d83573e4 ("media: intel/ipu6: add IPU6 DMA mapping API and MMU table") Cc: stable@vger.kernel.org Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Inspecting the powerup sequence we found that it does not match the
documentation at:
https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf
"""
(2) DW9714A requires waiting time of 12ms after power on. During this
waiting time, the offset calibration of internal amplifier is
operating for minimization of output offset current .
"""
This patch increases the powerup delay to follow the documentation.
Fixes: 9d00ccabfbb5 ("media: i2c: dw9714: Fix occasional probe errors") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Tested-by: Neil Sun <neil.sun@lcfuturecenter.com> Reported-by: Naomi Huang <naomi.huang@lcfuturecenter.com> Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xiaolei Wang [Fri, 5 Dec 2025 07:19:18 +0000 (15:19 +0800)]
media: i2c: ov5647: use our own mutex for the ctrl lock
__v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an
assertion to verify that the v4l2_ctrl_handler::lock is held, as it should
only be called when the lock has already been acquired. Therefore use our
own mutex for the ctrl lock, otherwise a warning will be reported.
Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls") Cc: stable@vger.kernel.org Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
[Sakari Ailus: Fix a minor conflict.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:11 +0000 (18:03 +0100)]
media: mt9m114: Add ACPI enumeration support
Add support for the mt9m114 sensor being enumerated through ACPI
using the INT33F0 HID as found on the Asus T100TA.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:10 +0000 (18:03 +0100)]
media: mt9m114: Return -EPROBE_DEFER if no endpoint is found
With IPU# bridges, endpoints may only be created when the IPU bridge is
initialized. This may happen after the sensor driver's first probe().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:09 +0000 (18:03 +0100)]
media: mt9m114: Drop start-, stop-streaming sequence from initialize
Drop the start-, stop-streaming sequence from initialize.
When streaming is started with a runtime-suspended sensor,
mt9m114_start_streaming() will runtime-resume the sensor which calls
mt9m114_initialize() immediately followed by calling
mt9m114_set_state(ENTER_CONFIG_CHANGE).
This results in the following state changes in quick succession:
mt9m114_set_state(ENTER_CONFIG_CHANGE) -> transitions to STREAMING
mt9m114_set_state(ENTER_SUSPEND) -> transitions to SUSPENDED
mt9m114_set_state(ENTER_CONFIG_CHANGE) -> transitions to STREAMING
these quick state changes confuses the CSI receiver on atomisp devices
causing streaming to not work.
Drop the state changes from mt9m114_initialize() and move
the mt9m114_initialize() call to mt9m114_start_streaming()
so that only a single mt9m114_set_state(ENTER_CONFIG_CHANGE) call
is made when streaming is started with a runtime-suspend sensor.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:08 +0000 (18:03 +0100)]
media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
The scaler is bypassed when the ISP source/output pad's pixel-format is
set to MEDIA_BUS_FMT_SGRBG10_1X10. Don't allow changing the IFP crop and/or
compose selections when in this mode.
Instead of returning -EINVAL simply return the current (noop) crop and
compose rectangles.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:07 +0000 (18:03 +0100)]
media: mt9m114: Update source pad selection and format when sink pad format changes
Call mt9m114_ifp_update_sel_and_src_fmt() on sink pad format changes to
propagate these downstream.
This is necessary in 2 different scenarios:
1. When passing through RAW10 bypassing the scaler then any sink pad format
changes must be propagated to the crop/compose selections and to the source
pad format.
2. When the scaler is active, then the crop-rectangle cannot be bigger then
the sink pad format minus a 4 pixel border all around. If the sink format
change reduces the size then things also needs to be propagated downstream.
Rather then adding extra code to check for these conditions, simply always
propagate sink pad format changes downstream.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:06 +0000 (18:03 +0100)]
media: mt9m114: Adjust IFP selections and source format when source format changes to/from RAW10
Changing the IFP source pad format to RAW10 means disabling the scaler,
which means that the crop and compose rectangles must be reset to
match the sink format size with no border.
And when changing the source pad format back from RAW10 to another format
which require demosaicing the crop and compose rectangles must be reset
to the sink format size minus a 4 pixels border all around it.
Also when changing the source pad format back from RAW10 to another format
the colorspace, ycbcr_enc and quantization need to be updated too.
Add a new mt9m114_ifp_update_sel_and_src_fmt() helper which resets all
these taking the bordersize for the new source format into account and
call this helper whenever the source pad format changes to/from RAW10.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:05 +0000 (18:03 +0100)]
media: mt9m114: Add and use mt9m114_ifp_get_border() helper function
Normally the IFP removes a 4 pixel border all around its sink format
size for demosaicing. But in RAW10 mode it does not do this.
Add a new mt9m114_ifp_get_border() helper function to get the border size
(4 or 0) and use this where applicable instead of hardcoding a border
of 4 pixels everywhere.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:04 +0000 (18:03 +0100)]
media: mt9m114: Put sensor in reset on power down
Put the sensor back in reset on power down. Putting the sensor in reset
reduces power-consumption by putting all the data / ctrl pins in High-Z
mode. This helps save power on designs where the regulators may need to
stay on while the sensor is powered down.
This also ensures that the sensor is properly reset on power up,
since now the sensor will see a reset high to low transition after
the regulators have been turned on.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
which means that if the reset pin was high before this code runs that
it will very briefly be driven low because of passing GPIOD_OUT_LOW when
requesting the GPIO only to be driven high again possibly directly after
that. Such a very brief driving low of the reset pin may put the chip in
a confused state.
Request the GPIO in high (reset the chip) state instead to avoid this,
turning the initial gpiod_set_value() in mt9m114_power_on() into a no-op.
and the fsleep() ensures that it will stay high long enough to properly
reset the chip.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This improves things from being 0.026 fps too low to 0.015 fps too high.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:01 +0000 (18:03 +0100)]
media: mt9m114: Fix default hblank and vblank values
The current default hblank and vblank values are based on reaching 30 fps
with the pixel-array outputting 1280x960, but the default format for
the pixel-array source pad and the isp sink pad is 1296x976, correct
the default hblank and vblank values to take this into account.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:03:00 +0000 (18:03 +0100)]
media: mt9m114: Lower minimum vblank value
As the comment above the defines says, the minimum values are undocumented
so the lowest values seen in register lists are used.
The version of the mt9m114 driver shipped together with the atomisp code
uses 21 for vblank in its register lists, lower MT9M114_MIN_VBLANK
accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:02:59 +0000 (18:02 +0100)]
media: mt9m114: Use aptina-PLL helper to get PLL values
Before this change the driver used hardcoded PLL m, n and p values to
achieve a 48MHz pixclock when used with an external clock with a frequency
of 24 MHz.
Use aptina_pll_calculate() to allow the driver to work with different
external clock frequencies. The m, n, and p values will be unchanged
with a 24 MHz extclk and this has also been tested with a 19.2 MHz
clock where m gets increased from 32 to 40.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
[Sakari Ailus: Fix capitalisation of "MHz".] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 30 Dec 2025 17:02:58 +0000 (18:02 +0100)]
media: aptina-pll: Debug log p1 min and max values
Make aptina_pll_calculate() debug log the calculated p1 min and max values,
this makes it easier to see how the m, n and p1 values were chosen.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Tue, 3 Oct 2023 09:46:19 +0000 (12:46 +0300)]
media: ccs: Track streaming state
With enable_streams and disable_streams, the driver for a device where
streams are not independently started and stopped needs to maintain state
information on streams that have been requested to be started. Do that
now.
In the future, a helper function in the framework is a desirable way to do
this instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sakari Ailus [Tue, 30 Dec 2025 17:22:02 +0000 (19:22 +0200)]
media: ccs: Fix setting initial sub-device state
Fix setting sub-device state for non-source sub-devices.
Fixes: 5755be5f15d9 ("media: v4l2-subdev: Rename .init_cfg() operation to .init_state()") Cc: stable@vger.kernel.org # for v6.8 and later Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alex Tran [Thu, 25 Dec 2025 21:03:08 +0000 (13:03 -0800)]
media: dt-bindings: ti,omap3isp: Convert to DT schema
Convert binding for ti,omap3isp from TXT to YAML format.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alex Tran [Thu, 25 Dec 2025 21:03:07 +0000 (13:03 -0800)]
media: dt-bindings: i2c: toshiba,et8ek8: Convert to DT schema
Convert binding for toshiba,et8ek8 from TXT to YAML format.
Update MAINTAINERS file accordingly. The binding references
video-interface-devices.yaml at top level to inherit flash-leds
property.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
projects / thirdparty / kernel / linux.git / log
