soc: qcom: fix QMI encoding/decoding for basic elements
Extend the QMI byte encoding and decoding logic to support multiple basic
data type sizes (u8, u16, u32, u64) using differnet macros for each type.
Ensure correct handling of data sizes and proper byte order conversion on
big-endian platforms by consistently applying these macros during encoding
and decoding of basic elements.
Extend handling of QMI basic element types to also capture error codes.
This is required for big-endian platforms where a simple memcpy is not
sufficient and exact data type knowledge is necessary.
Bjorn Andersson [Wed, 14 Jan 2026 03:31:31 +0000 (21:31 -0600)]
Merge branch '20260105-kvmrprocv10-v10-0-022e96815380@oss.qualcomm.com' into drivers-for-6.20
Merge the support for loading and managing the TrustZone-based remote
processors found in the Glymur platform through a topic branch, as it's
a mix of qcom-soc and remoteproc patches.
Mukesh Ojha [Mon, 5 Jan 2026 13:23:01 +0000 (18:53 +0530)]
remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
Most Qualcomm platforms feature Gunyah hypervisor, which typically
handles IOMMU configuration. This includes mapping memory regions and
device memory resources for remote processors by intercepting
qcom_scm_pas_auth_and_reset() calls. These mappings are later removed
during teardown. Additionally, SHM bridge setup is required to enable
memory protection for both remoteproc metadata and its memory regions.
When the aforementioned hypervisor is absent, the operating system must
perform these configurations instead.
When Linux runs as the hypervisor (@ EL2) on a SoC, it will have its
own device tree overlay file that specifies the firmware stream ID now
managed by Linux for a particular remote processor. If the iommus
property is specified in the remoteproc device tree node, it indicates
that IOMMU configuration must be handled by Linux. In this case, the
has_iommu flag is set for the remote processor, which ensures that the
resource table, carveouts, and SHM bridge are properly configured before
memory is passed to TrustZone for authentication. Otherwise, the
has_iommu flag remains unset, which indicates default behavior.
Enables Secure PAS support for remote processors when IOMMU configuration
is managed by Linux.
Mukesh Ojha [Mon, 5 Jan 2026 13:23:00 +0000 (18:53 +0530)]
remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call
Qualcomm remote processor may rely on static and dynamic resources for
it to be functional. For most of the Qualcomm SoCs, when run with Gunyah
or older QHEE hypervisor, all the resources whether it is static or
dynamic, is managed by the hypervisor. Dynamic resources if it is
present for a remote processor will always be coming from secure world
via SMC call while static resources may be present in remote processor
firmware binary or it may be coming from SMC call along with dynamic
resources.
Remoteproc already has method like rproc_elf_load_rsc_table() to check
firmware binary has resources or not and if it is not having then we
pass NULL and zero as input resource table and its size argument
respectively to qcom_scm_pas_get_rsc_table() and while it has resource
present then it should pass the present resources to Trustzone(TZ) so that
it could authenticate the present resources and append dynamic resource
to return in output_rt argument along with authenticated resources.
Extend parse_fw callback to include SMC call to get resources from
Trustzone and to leverage resource table parsing and mapping and
unmapping code from the remoteproc framework.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:59 +0000 (18:52 +0530)]
firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Mukesh Ojha [Mon, 5 Jan 2026 13:22:58 +0000 (18:52 +0530)]
firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge both for metadata (before
calling qcom_scm_pas_init_image()) and for remoteproc memory (before
calling qcom_scm_pas_auth_and_reset()). We have taken care the things
required for qcom_scm_pas_auth_and_reset(). Lets put these awareness
of above conditions into qcom_scm_pas_init_image() and
qcom_scm_pas_metadata_release().
Refactor qcom_scm_pas_init_image() by moving the memory allocation,
copy, and free operations to a higher-level function, and isolate the
actual SMC call in a separate function. The main intention is to allow
flexibility for different allocators and to respect any constraints that
the allocator API may impose before invoking the actual SCM function.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:56 +0000 (18:52 +0530)]
firmware: qcom_scm: Add a prep version of auth_and_reset function
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:55 +0000 (18:52 +0530)]
soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:54 +0000 (18:52 +0530)]
soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Mukesh Ojha [Mon, 5 Jan 2026 13:22:53 +0000 (18:52 +0530)]
remoteproc: pas: Replace metadata context with PAS context structure
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:52 +0000 (18:52 +0530)]
firmware: qcom_scm: Introduce PAS context allocator helper function
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Mukesh Ojha [Mon, 5 Jan 2026 13:22:50 +0000 (18:52 +0530)]
firmware: qcom_scm: Remove redundant piece of code
The qcom_scm_pas_metadata_release() function already frees the allocated
memory and sets ctx->ptr to NULL. Resetting ctx->phys and ctx->size to
zero is unnecessary because the context is expected to be discarded
after release.
On most Qualcomm platforms, the Qualcomm Hypervisor Execution
Environment (QHEE) is either used as a standalone hypervisor or
co-exists as a module with the Gunyah hypervisor. When QHEE is
present, it configures firmware streams for remote processors.
If QHEE is not available, the operating system must perform
these configurations instead and for that remote processor
firmware stream should be presented to the operating system.
To support this, add the iommus property as an optional property
for PAS-supported devices.
Haotian Zhang [Tue, 16 Dec 2025 01:39:32 +0000 (09:39 +0800)]
soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe
If cmd_db_magic_matches() fails after memremap() succeeds, the function
returns -EINVAL without unmapping the memory region, causing a
potential resource leak.
Switch to devm_memremap to automatically manage the map resource.
Some compute SoCs support additional operation modes, extending the
existing set of USB3/safe/DP-alt-mode.
The firmware performs all the necessary handshakes for
us and there is no room for error on that level (i.e. the sequences
will match what happens on Windows).
The trade-off with that approach is that the received notifications
trim some of the PDO/EUDO data (particularly the cable/plug parts),
offering a set of similar-in-nature-but-not-the-same indicators.
In an attempt to remedy this, I reconstructed some of it, so that the
connected mux/retimer drivers can continue to behave as expected.
Add support for parsing the aforementioned data coming from PMIC_GLINK
and passing it on to the various Type-C components.
Haotian Zhang [Wed, 17 Dec 2025 04:13:38 +0000 (12:13 +0800)]
clk: qcom: Return correct error code in qcom_cc_probe_by_index()
When devm_platform_ioremap_resource() fails, it returns various
error codes. Returning a hardcoded -ENOMEM masks the actual
failure reason.
Use PTR_ERR() to propagate the actual error code returned by
devm_platform_ioremap_resource() instead of -ENOMEM.
Fixes: 75e0a1e30191 ("clk: qcom: define probe by index API as common API") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251217041338.2432-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson <andersson@kernel.org>
firmware: qcom_scm: Use TASK_IDLE state in wait_for_wq_completion()
When the kernel issues an SMC (Secure Monitor Call) and the firmware
requests the kernel to wait, the waiting thread enters an
uninterruptible (D) state. In case of an extended wait request by the
firmware, any device suspend request, cannot proceed because of the
thread stuck in D state. This blocks the device suspend.
Replace wait_for_completion() with wait_for_completion_state(...,
TASK_IDLE), so that the waiting thread, show up in TASK_IDLE state,
instead of TASK_UNINTERRUPTIBLE (D state). This allows the thread to
block until completion, without blocking the device suspend.
firmware: qcom_scm: Support multiple waitq contexts
Currently, only a single waitqueue context exists in the driver.
Multi-waitqueue mechanism is added in firmware to support the case,
when multiple VMs make SMC calls or single VM making multiple calls on
same CPU. Enhance the driver to support multiple waitqueue when
support is present in the firmware.
When VMs make a SMC call, firmware allocates a waitqueue context,
assuming the SMC call to be a blocking call. The SMC calls that cannot
acquire resources, while execution in firmware, are returned to sleep
in the calling VM. When the resource becomes available in the
firmware, the VM gets notified to wake the sleeping thread and resume
SMC call. The current qcom_scm driver supports single waitqueue as the
old firmwares support only single waitqueue with waitqueue id zero.
Multi-waitqueue mechanism is added in firmware starting SM8650 to
support the case when multiple VMs make SMC calls or single VM making
multiple calls on same CPU. To enable this support in qcom_scm driver,
add support for handling multiple waitqueues. For instance, SM8650
firmware can allocate two such waitq contexts, so the driver needs to
implement two waitqueue contexts. For a generalized approach, the
number of supported waitqueues can be queried from the firmware using
a SMC call.
Introduce qcom_scm_query_waitq_count to get the number of waitqueue
contexts supported by the firmware and allocate “N” unique waitqueue
contexts with a dynamic sized array where each unique wq_ctx is
associated with a struct completion variable for easy lookup. Older
targets which support only a single waitqueue, may return an error for
qcom_scm_query_waitq_count, set the wq_cnt to one for such failures.
firmware: qcom_scm: Add API to get waitqueue IRQ info
Bootloader and firmware for SM8650 and older chipsets expect node
name as "qcom_scm", in order to patch the wait queue IRQ information.
However, DeviceTree uses node name "scm" and this mismatch prevents
firmware from correctly identifying waitqueue IRQ information. Waitqueue
IRQ is used for signaling between secure and non-secure worlds.
To resolve this, introduce qcom_scm_get_waitq_irq() that'll get the
hardware IRQ number to be used from firmware instead of relying on data
provided by devicetree, thereby bypassing the DeviceTree node name
mismatch.
This hardware IRQ number is converted to a Linux IRQ number using newly
qcom_scm_fill_irq_fwspec_params(). This Linux IRQ number is then
supplied to the threaded_irq call.
Jingyi Wang [Mon, 24 Nov 2025 07:31:54 +0000 (23:31 -0800)]
dt-bindings: sram: Document qcom,kaanapali-imem and its child node
On Qualcomm Kaanapali platform, IMEM is a block of SRAM shared across
multiple IP blocks which can falk back to "mmio-sram". Documnent it and
its child node "qcom,pil-reloc-info" which is used for collecting
remoteproc ramdumps.
Document the Last Level Cache Controller on Glymur SoC
Glymur LLCC has 12 base register regions and an additional AND, OR
broadcast region, total 14 register regions
Increase maxItems for reg and reg-names to allow 14 entries for Glymur
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Linus Torvalds [Fri, 12 Dec 2025 17:44:03 +0000 (05:44 +1200)]
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
Linus Torvalds [Fri, 12 Dec 2025 10:04:18 +0000 (22:04 +1200)]
Merge tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
Linus Torvalds [Fri, 12 Dec 2025 10:01:32 +0000 (22:01 +1200)]
Merge tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
Linus Torvalds [Fri, 12 Dec 2025 09:59:19 +0000 (21:59 +1200)]
Merge tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
Linus Torvalds [Fri, 12 Dec 2025 09:52:42 +0000 (21:52 +1200)]
Merge tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
Brendan Jackman [Sun, 7 Dec 2025 03:53:18 +0000 (03:53 +0000)]
bug: Hush suggest-attribute=format for __warn_printf()
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Heiko Carstens [Mon, 8 Dec 2025 20:06:58 +0000 (21:06 +0100)]
bug: Let report_bug_entry() provide the correct bugaddr
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Evan Li [Fri, 12 Dec 2025 08:49:43 +0000 (16:49 +0800)]
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") Reported-by: kitta <kitta@linux.alibaba.com> Co-developed-by: kitta <kitta@linux.alibaba.com> Signed-off-by: Evan Li <evan.li@linux.alibaba.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Linus Torvalds [Thu, 11 Dec 2025 03:13:29 +0000 (12:13 +0900)]
Merge tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Linus Torvalds [Thu, 11 Dec 2025 00:57:08 +0000 (09:57 +0900)]
Merge tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for SPI that came in during the merge window,
nothing too exciting here"
* tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: Fix an error handling path in mchp_corespi_probe()
spi: cadence-qspi: Fix runtime PM imbalance in probe
Linus Torvalds [Thu, 11 Dec 2025 00:54:59 +0000 (09:54 +0900)]
Merge tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
Arnd Bergmann [Thu, 4 Dec 2025 10:01:58 +0000 (11:01 +0100)]
mm: memfd_luo: add CONFIG_SHMEM dependency
The new memfd code fails to link without SHMEM:
aarch64-linux-ld: mm/memfd_luo.o: in function `memfd_luo_retrieve_folios':
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0xdc): undefined reference to `shmem_add_to_page_cache'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x11c): undefined reference to `shmem_inode_acct_blocks'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x134): undefined reference to `shmem_recalc_inode'
Add a Kconfig dependency to disallow that configuration.
Arnd Bergmann [Thu, 4 Dec 2025 10:28:59 +0000 (11:28 +0100)]
mm: shmem: avoid build warning for CONFIG_SHMEM=n
The newly added 'flags' variable is unused and causes a warning if
CONFIG_SHMEM is disabled, since the shmem_acct_size() macro it is passed
into does nothing:
mm/shmem.c: In function '__shmem_file_setup':
mm/shmem.c:5816:23: error: unused variable 'flags' [-Werror=unused-variable]
5816 | unsigned long flags = (vm_flags & VM_NORESERVE) ? SHMEM_F_NORESERVE : 0;
| ^~~~~
Replace the two macros with equivalent inline functions to get the
argument checking.
Link: https://lkml.kernel.org/r/20251204102905.1048000-1-arnd@kernel.org Fixes: 6ff1610ced56 ("mm: shmem: use SHMEM_F_* flags instead of VM_* flags") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Christian Brauner <brauner@kernel.org> Cc: guoweikang <guoweikang.kernel@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: invalidate inode if i_mode is zero after block read
A panic occurs in ocfs2_unlink due to WARN_ON(inode->i_nlink == 0) when
handling a corrupted inode with i_mode=0 and i_nlink=0 in memory.
This "zombie" inode is created because ocfs2_read_locked_inode proceeds
even after ocfs2_validate_inode_block successfully validates a block that
structurally looks okay (passes checksum, signature etc.) but contains
semantically invalid data (specifically i_mode=0). The current validation
function doesn't check for i_mode being zero.
This results in an in-memory inode with i_mode=0 being added to the VFS
cache, which later triggers the panic during unlink.
Prevent this by adding an explicit check for (i_mode == 0, i_nlink == 0,
non-orphan) within ocfs2_validate_inode_block. If the check is true,
return -EFSCORRUPTED to signal corruption. This causes the caller
(ocfs2_read_locked_inode) to invoke make_bad_inode(), correctly preventing
the zombie inode from entering the cache.
Link: https://lkml.kernel.org/r/20251202224507.53452-2-eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reported-by: syzbot+55c40ae8a0e5f3659f2b@syzkaller.appspotmail.com Fixes: https://syzkaller.appspot.com/bug?extid=55c40ae8a0e5f3659f2b Link: https://lore.kernel.org/all/20251022222752.46758-2-eraykrdg1@gmail.com/T/ Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warning:
fs/ocfs2/xattr.c:52:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER struct ocfs2_extent_rec er; onto the FAM
struct ocfs2_xattr_value_root::xr_list.l_recs[], while keeping the FAM and
the start of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's intentionally
placed inmediately after the related structure --no blank line in between.
Link: https://lkml.kernel.org/r/aRKm_7aN7Smc3J5L@kspp Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
Now that the centralized `ocfs2_emergency_state()` helper is available,
refactor remaining filesystem-wide checks for `ocfs2_is_soft_readonly` and
`ocfs2_is_hard_readonly` to use this new function.
To ensure strict consistency with the previous behavior and guarantee no
functional changes, the call sites continue to explicitly return -EROFS
when the emergency state is detected. This standardizes the check logic
while preserving the existing error handling flow.
Link: https://lkml.kernel.org/r/3421641b54ad6b6e4ffca052351b518eacc1bd08.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: add ocfs2_emergency_state helper and apply to setattr
Patch series "ocfs2: Refactor read-only checks to use
ocfs2_emergency_state", v4.
Following the fix for the `make_bad_inode` validation failure (syzbot ID: b93b65ee321c97861072), this separate series introduces a new helper
function, `ocfs2_emergency_state()`, to improve and centralize read-only
and error state checking.
This is modeled after the `ext4_emergency_state()` pattern, providing a
single, unified location for checking all filesystem-level emergency
conditions. This makes the code cleaner and ensures that any future
checks (e.g., for fatal error states) can be added in one place.
This series is structured as follows:
1. The first patch introduces the `ocfs2_emergency_state()` helper
(currently checking for -EROFS) and applies it to `ocfs2_setattr`
to provide a "fail-fast" mechanism, as suggested by Albin
Babu Varghese.
2. The second patch completes the refactoring by converting all
remaining read-only checks throughout OCFS2 to use this new helper.
This patch (of 2):
To centralize error checking, follow the pattern of other filesystems like
ext4 (which uses `ext4_emergency_state()`), and prepare for future
enhancements, this patch introduces a new helper function:
`ocfs2_emergency_state()`.
The purpose of this helper is to provide a single, unified location for
checking all filesystem-level emergency conditions. In this initial
implementation, the function only checks for the existing hard and soft
read-only modes, returning -EROFS if either is set.
This provides a foundation where future checks (e.g., for fatal error
states returning -EIO, or shutdown states) can be easily added in one
place.
This patch also adds this new check to the beginning of `ocfs2_setattr()`.
This ensures that operations like `ftruncate` (which triggered the
original BUG) fail-fast with -EROFS when the filesystem is already in a
read-only state.
Link: https://lkml.kernel.org/r/cover.1764728893.git.eraykrdg1@gmail.com Link: https://lkml.kernel.org/r/e9e975bcaaff8dbc155b70fbc1b2798a2e36e96f.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Suggested-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: David Hunter <david.hunter.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ally Heev [Wed, 3 Dec 2025 15:28:49 +0000 (20:58 +0530)]
checkpatch: add uninitialized pointer with __free attribute check
Uinitialized pointers with __free attribute can cause undefined behavior
as the memory randomly assigned to the pointer is freed automatically when
the pointer goes out of scope. add check in checkpatch to detect such
issues.
syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the
`cl_next_free_rec` field of the allocation chain list (next free slot in
the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)
condition in ocfs2_find_victim_chain() and panicking the kernel.
To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),
just before calling ocfs2_find_victim_chain(), the code block in it being
executed when either of the following conditions is true:
1. `cl_next_free_rec` is equal to 0, indicating that there are no free
chains in the allocation chain list
2. `cl_next_free_rec` is greater than `cl_count` (the total number of
chains in the allocation chain list)
Either of them being true is indicative of the fact that there are no
chains left for usage.
This is addressed using ocfs2_error(), which prints
the error log for debugging purposes, rather than panicking the kernel.
Link: https://lkml.kernel.org/r/20251201130711.143900-1-activprithvi@gmail.com Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com> Reported-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=96d38c6e1655c1420a72 Tested-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pasha Tatashin [Sun, 30 Nov 2025 01:09:19 +0000 (20:09 -0500)]
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
The kernel test robot reported a Smatch warning:
kernel/liveupdate/luo_core.c:402 luo_ioctl() warn: unsigned 'nr' is
never less than zero.
This occurs because 'nr' is unsigned and LIVEUPDATE_CMD_BASE is currently
defined as 0, making the check (nr < LIVEUPDATE_CMD_BASE) always false.
Remove the explicit lower bound check. The logic remains correct because
'nr' is unsigned; if nr is less than LIVEUPDATE_CMD_BASE, the expression
(nr - LIVEUPDATE_CMD_BASE) will wrap around to a large positive value.
This will inevitably be larger than ARRAY_SIZE(luo_ioctl_ops) and be
caught by the upper bound check.
Link: https://lkml.kernel.org/r/20251130010919.1488230-1-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511280300.6pvBmXUS-lkp@intel.com/ Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Matlack <dmatlack@google.com> Cc: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
Add comprehensive validation of inline xattr metadata in
ocfs2_xattr_ibody_list() to prevent out-of-bounds access and
use-after-free bugs when processing corrupted inline xattrs.
The patch adds two critical validations:
1. Validates i_xattr_inline_size before use:
- Ensures it does not exceed block size
- Ensures it is at least large enough for xattr header
- Prevents pointer arithmetic with corrupted size values that could
point outside the inode block
2. Validates xattr entry count (xh_count):
- Calculates maximum entries that can fit in the inline space
- Rejects counts that exceed this limit
- Prevents out-of-bounds array access in subsequent code
Without these checks, a corrupted filesystem with invalid inline xattr
metadata can cause the code to access memory beyond the allocated space.
For example:
- A corrupted i_xattr_inline_size of 0 would cause header pointer
calculation to point past the end of the block
- A corrupted xh_count of 22 with inline_size of 256 would cause
array access 7 entries beyond the 15 that actually fit (the syzbot
reproducer used xh_count of 20041), leading to use-after-free when
accessing freed memory pages
The validation uses the correct inline_size (from di->i_xattr_inline_size)
rather than block size, ensuring accurate bounds checking for inline
xattrs specifically.
Thorsten Blum [Wed, 26 Nov 2025 11:44:15 +0000 (12:44 +0100)]
ocfs2: replace deprecated strcpy with strscpy
strcpy() has been deprecated [1] because it performs no bounds checking on
the destination buffer, which can lead to buffer overflows. Replace it
with the safer strscpy(). No functional changes.
ocfs2: check tl_used after reading it from trancate log inode
The fuzz image has a truncate log inode whose tl_used is bigger than
tl_count so it triggers the BUG in ocfs2_truncate_log_needs_flush() [1].
As what the check in ocfs2_truncate_log_needs_flush() does, just do same
check into ocfs2_get_truncate_log_info() when truncate log inode is
reading in so we can bail out earlier.
Link: https://lkml.kernel.org/r/tencent_B24B1C1BE225DCBA44BB6933AB9E1B1B0708@qq.com Reported-by: syzbot+f82afc4d4e74d0ef7a89@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f82afc4d4e74d0ef7a89 Tested-by: syzbot+f82afc4d4e74d0ef7a89@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Fri, 28 Nov 2025 07:17:07 +0000 (10:17 +0300)]
liveupdate: luo_file: don't use invalid list iterator
If we exit a list_for_each_entry() without hitting a break then the list
iterator points to an offset from the list_head. It's a non-NULL but
invalid pointer and dereferencing it isn't allowed.
Introduce a new "found" variable to test instead.
Link: https://lkml.kernel.org/r/aSlMc4SS09Re4_xn@stanley.mountain Fixes: 3ee1d673194e ("liveupdate: luo_file: implement file systems callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202511280420.y9O4fyhX-lkp@intel.com/ Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Wed, 10 Dec 2025 23:54:08 +0000 (08:54 +0900)]
Merge tag 'slab-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for performance regression in tests that perform
kmem_cache_destroy() a lot, due to unnecessarily wide scope of
kvfree_rcu_barrier() (Harry Yoo)
* tag 'slab-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction
Linus Torvalds [Wed, 10 Dec 2025 23:19:46 +0000 (08:19 +0900)]
Merge tag 's390-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Use the MSI parent domain API instead of the legacy API for setup and
teardown of PCI MSI IRQs
- Select POSIX_CPU_TIMERS_TASK_WORK now that VIRT_XFER_TO_GUEST_WORK
has been implemented for s390
- Fix a KVM bug which can lead to guest memory corruption
- Fix KASAN shadow memory mapping for hotplugged memory
- Minor bug fixes and improvements
* tag 's390-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bug: Add missing alignment
s390/bug: Add missing CONFIG_BUG ifdef again
KVM: s390: Fix gmap_helper_zap_one_page() again
s390/pci: Migrate s390 IRQ logic to IRQ domain API
genirq: Change hwirq parameter to irq_hw_number_t
s390: Select POSIX_CPU_TIMERS_TASK_WORK
s390: Unmap early KASAN shadow on memory offlining
s390/vmem: Support 2G page splitting for KASAN shadow freeing
s390/boot: Use entire page for PTEs
s390/vmur: Use scnprintf() instead of sprintf()
Linus Torvalds [Wed, 10 Dec 2025 23:14:23 +0000 (08:14 +0900)]
Merge tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- last minute fix for missing parenthesis in recently merged code (Hans
de Goede)
- removal of excessive, non-fatal warnings (Dave Kleikamp)
* tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Fix DMA_BIT_MASK() macro being broken
dma/pool: eliminate alloc_pages warning in atomic_pool_expand
projects / thirdparty / kernel / linux.git / log
