In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter") Signed-off-by: Junlin Li <make24@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <make24@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] Signed-off-by: Sasha Levin <sashal@kernel.org>
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically
parented by the hdmiphy clk and it is expected that the DCLK_VOP and
hdmiphy clk rate are kept in sync.
Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used
on RK3328, to make full use of all possible supported display modes.
Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP") Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Initialize workqueue before requesting mailbox channel, otherwise if
mailbox interrupt comes before workqueue ready, the imx_rproc_rx_callback
will trigger issue.
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: 91e916771de0 ("clk: imx: scu: remove legacy scu clock binding support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-14-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
commit 926bf91248dd
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags") Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Switch strtoul to strtoull as an unsigned long in 32-bit build isn't
64-bits.
Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When perf_time__parse_str() fails in perf_sched__timehist(),
need to free session that was previously created, fix it.
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:
The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.
This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.
Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.
Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.
Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.
Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.
Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.
The function nilfs_btree_check_delete(), which checks whether degeneration
to direct mapping occurs before deleting a b-tree entry, causes memory
access outside the block buffer when retrieving the maximum key if the
root node has no entries.
This does not usually happen because b-tree mappings with 0 child nodes
are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen
if the b-tree root node read from a device is configured that way, so fix
this potential issue by adding a check for that case.
Due to the nature of b-trees, nilfs2 itself and admin tools such as
mkfs.nilfs2 will never create an intermediate b-tree node block with 0
child nodes, nor will they delete (key, pointer)-entries that would result
in such a state. However, it is possible that a b-tree node block is
corrupted on the backing device and is read with 0 child nodes.
Because operation is not guaranteed if the number of child nodes is 0 for
intermediate node blocks other than the root node, modify
nilfs_btree_node_broken(), which performs sanity checks when reading a
b-tree node block, so that such cases will be judged as metadata
corruption.
Patch series "nilfs2: fix potential issues with empty b-tree nodes".
This series addresses three potential issues with empty b-tree nodes that
can occur with corrupted filesystem images, including one recently
discovered by syzbot.
This patch (of 3):
If a b-tree is broken on the device, and the b-tree height is greater than
2 (the level of the root node is greater than 1) even if the number of
child nodes of the b-tree root is 0, a NULL pointer dereference occurs in
nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert().
This is because, when the number of child nodes of the b-tree root is 0,
nilfs_btree_do_lookup() does not set the block buffer head in any of
path[x].bp_bh, leaving it as the initial value of NULL, but if the level
of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(),
which accesses the buffer memory of path[x].bp_bh, is called.
Fix this issue by adding a check to nilfs_btree_root_broken(), which
performs sanity checks when reading the root node from the device, to
detect this inconsistency.
Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause
early on.
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
Calling ext4_xattr_ibody_find right after reading the inode with
ext4_get_inode_loc will lead to a check of the validity of the xattrs,
avoiding this problem.
Reported-by: syzbot+0c2508114d912a54ee79@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c2508114d912a54ee79 Fixes: e8e948e7802a ("ext4: let ext4_find_entry handle inline data") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Link: https://patch.msgid.link/20240821152324.3621860-5-cascardo@igalia.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of errors when reading an inode from disk or traversing inline
directory entries, return an error-encoded ERR_PTR instead of returning
NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns
such encoded errors.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem") Signed-off-by: Sasha Levin <sashal@kernel.org>
min_clusters is signed integer and will be converted to unsigned
integer when compared with unsigned number stats.free_clusters.
If min_clusters is negative, it will be converted to a huge unsigned
value in which case all groups may not meet the actual desired free
clusters.
Set negative min_clusters to 0 to avoid unexpected behavior.
If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode
bitmap buffer_head was successfully verified, then __ext4_new_inode()
will get a valid inode_bitmap_bh of a corrupted group from
ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release.
Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like
how ext4_free_inode() does to avoid buffer_head leak.
Fixes: 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Link: https://patch.msgid.link/20240820132234.2759926-3-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Release inode_bitmap_bh from ext4_read_inode_bitmap() in
ext4_mark_inode_used() to avoid buffer_head leak.
By the way, remove unneeded goto for invalid ino when inode_bitmap_bh
is NULL.
In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat`
field is directly assigned to a new value without using the appropriate
RCU pointer assignment functions. According to RCU usage rules, this is
illegal and can lead to unpredictable behavior, including data
inconsistencies and impossible-to-diagnose memory corruption issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the assignment is now done using rcu_assign_pointer(),
which ensures that the pointer assignment is done safely, with the
necessary memory barriers and synchronization. This change prevents
potential RCU dereference issues by ensuring that the `cat` field is
safely updated while still adhering to RCU's requirements.
Fixes: 0817534ff9ea ("smackfs: Fix use-after-free in netlbl_catmap_walk()") Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in
ext4_group_info") speed up fstrim by skipping trim trimmed group. We
also has the chance to clear trimmed once there exists some block free
for this group(mount without discard), and the next trim for this group
will work well too.
For mount with discard, we will issue dicard when we free blocks, so
leave trimmed flag keep alive to skip useless trim trigger from
userspace seems reasonable. But for some case like ext4 build on
dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4
maybe unaligned for dm thinpool, and thinpool will just finish this
discard(see process_discard_bio when begein equals to end) without
actually process discard. For this case, trim from userspace can really
help us to free some thinpool block.
So convert to clear trimmed flag for all case no matter mounted with
discard or not.
Fixes: 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
In 2018, a dependency on <linux/crc32poly.h> was added to avoid
duplicating the same constant in multiple files. Two months later it was
found to be a bad idea and the definition of CRC32_POLY_LE macro was moved
into xz_private.h to avoid including <linux/crc32poly.h>.
xz_private.h is a wrong place for it too. Revert back to the upstream
version which has the poly in xz_crc32_init() in xz_crc32.c.
Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h") Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
tpm_dev_transmit prepares the TPM space before attempting command
transmission. However if the command fails no rollback of this
preparation is done. This can result in transient handles being leaked
if the device is subsequently closed with no further commands performed.
Fix this by flushing the space in the event of command transmission
failure.
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Jonathan McDowell <noodles@meta.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When checking a memory buffer to be consecutive in machine memory,
the alignment needs to be checked, too. Failing to do so might result
in DMA memory not being aligned according to its requested size,
leading to error messages like:
4xxx 0000:2b:00.0: enabling device (0140 -> 0142)
4xxx 0000:2b:00.0: Ring address not aligned
4xxx 0000:2b:00.0: Failed to initialise service qat_crypto
4xxx 0000:2b:00.0: Resetting device qat_dev0
4xxx: probe of 0000:2b:00.0 failed with error -14
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
cur_ctx_seqno already does the same thing, but handles the edge cases
where a refcnt'd context can live after lastclose. So let's not have
two ways to do the same thing.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20211109181117.591148-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: a30f9f65b5ac ("drm/msm/a5xx: workaround early ring-buffer emptiness check") Signed-off-by: Sasha Levin <sashal@kernel.org>
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.
Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.
Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.
Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT,
but the pages that contain kernel TEXT may also contain kernel RODATA,
and depending on selected debug options PAGE_KERNEL_TEXT may be either
RWX or ROX. RODATA must be writable during init because it also
contains ro_after_init data.
So use PAGE_KERNEL_X instead to be sure it is RWX.
Mapping without large TLBs has no added value on the 8xx.
Mapping without large TLBs is still necessary on 40x when
selecting CONFIG_KFENCE or CONFIG_DEBUG_PAGEALLOC or
CONFIG_STRICT_KERNEL_RWX, but this is done automatically
and doesn't require user selection.
Remove 'noltlbs' kernel parameter, the user has no reason
to use it.
In dbNextAG() , there is no check for the case where bmp->db_numag is
greater or same than MAXAG due to a polluted image, which causes an
out-of-bounds. Therefore, a bounds check should be added in dbMount().
And in dbNextAG(), a check for the case where agpref is greater than
bmp->db_numag should be added, so an out-of-bounds exception should be
prevented.
Additionally, a check for the case where agno is greater or same than
MAXAG should be added in diAlloc() to prevent out-of-bounds.
Reported-by: Jeongjun Park <aha310510@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free.
Fixes: fcd427303eb9 ("scsi: elx: libefc: SLI and FC PORT state machine interfaces") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/b666ab26-6581-4213-9a3d-32a9147f0399@stanley.mountain Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.
Several cs track offsets (such as 'track->db_s_read_offset')
either are initialized with or plainly take big enough values that,
once shifted 8 bits left, may be hit with integer overflow if the
resulting values end up going over u32 limit.
Same goes for a few instances of 'surf.layer_size * mslice'
multiplications that are added to 'offset' variable - they may
potentially overflow as well and need to be validated properly.
While some debug prints in this code section take possible overflow
issues into account, simply casting to (unsigned long) may be
erroneous in its own way, as depending on CPU architecture one is
liable to get different results.
Fix said problems by:
- casting 'offset' to fixed u64 data type instead of
ambiguous unsigned long.
- casting one of the operands in vulnerable to integer
overflow cases to u64.
- adjust format specifiers in debug prints to properly
represent 'offset' values.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's not an error for a target to change the bus phase during a transfer.
Unfortunately, the FLAG_DMA_FIXUP workaround does not allow for that -- a
phase change produces a DRQ timeout error and the device borken flag will
be set.
Check the phase match bit during FLAG_DMA_FIXUP processing. Don't forget to
decrement the command residual. While we are here, change shost_printk()
into scmd_printk() for better consistency with other DMA error messages.
This is necessary for the eventual removal of SCp from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220218195117.25689-9-bvanassche@acm.org Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Ondrej Zary <linux@zary.sk> Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 5768718da941 ("scsi: NCR5380: Check for phase match during PDMA fixup") Signed-off-by: Sasha Levin <sashal@kernel.org>
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reported-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: c324acd5032f ("drm/radeon/kms: parse the extended LCD info block") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reported-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
This commit adds a null check for the set_output_gamma function pointer
in the dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.
This fix prevents a potential null pointer dereference error.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
373 bool dcn30_set_output_transfer_func(struct dc *dc,
374 struct pipe_ctx *pipe_ctx,
375 const struct dc_stream_state *stream)
376 {
377 int mpcc_id = pipe_ctx->plane_res.hubp->inst;
378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
379 const struct pwl_params *params = NULL;
380 bool ret = false;
381
382 /* program OGAM or 3DLUT only for the top pipe*/
383 if (pipe_ctx->top_pipe == NULL) {
384 /*program rmu shaper and 3dlut in MPC*/
385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
386 if (ret == false && mpc->funcs->set_output_gamma) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL
387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
388 params = &stream->out_transfer_func.pwl;
389 else if (pipe_ctx->stream->out_transfer_func.type ==
390 TF_TYPE_DISTRIBUTED_POINTS &&
391 cm3_helper_translate_curve_to_hw_format(
392 &stream->out_transfer_func,
393 &mpc->blender_params, false))
394 params = &mpc->blender_params;
395 /* there are no ROM LUTs in OUTGAM */
396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
397 BREAK_TO_DEBUGGER();
398 }
399 }
400
--> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash
402 return ret;
403 }
Fixes: d99f13878d6f ("drm/amd/display: Add DCN3 HWSEQ") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for
capacity when no rsns") made it so that capacity on systems without
current sensing would be read from VFSOC instead of RepSOC. However,
the SOC threshold calculation still read RepSOC to get the SOC
regardless of the current sensing option state.
Fix this by applying the same conditional to determine which register
should be read.
This also seems to be the intended behavior as per the datasheet - SOC
alert config value in MiscCFG on setups without current sensing is set
to a value of 0b11, indicating SOC alerts being generated based on
VFSOC, instead of 0b00 which indicates SOC alerts being generated based
on RepSOC.
This fixes an issue on the Galaxy S3/Midas boards, where the alert
interrupt would be constantly retriggered, causing high CPU usage
on idle (around ~12%-15%).
Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Henrik Grimler <henrik@grimler.se> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable
properties of the battery, but for this driver they are writable values
and used as the minimum and maximum values for charging. Remove the
DESIGN designation from these values.
Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs") Suggested-by: Chen-Yu Tsai <wens@kernel.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution
path in which, due to lazy evaluation, devlength isn't initialised with the
parsed string:
Chips reporting overcurrent alarms report it in the second alarm register.
That means the second alarm register has to be read, even if the chip only
supports 8 or fewer ADC channels.
MAX16067 and MAX16068 report undervoltage and overvoltage alarms in
separate registers. Fold register contents together to report both with
the existing alarm attribute. This requires actually storing the chip type
in struct max16065_data. Rename the variable 'chip' to match the variable
name used in the probe function.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Stan Johnson recently reported a failure from the 'dump' command:
DUMP: Date of this level 0 dump: Fri Aug 9 23:37:15 2024
DUMP: Dumping /dev/sda (an unlisted file system) to /dev/null
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 3595695 blocks.
DUMP: Context save fork fails in parent 671
The dump program uses the clone syscall with the CLONE_IO flag, that is,
flags == 0x80000000. When that value is promoted from long int to u64 by
m68k_clone(), it undergoes sign-extension. The new value includes
CLONE_INTO_CGROUP so the validation in cgroup_css_set_fork() fails and
the syscall returns -EBADF. Avoid sign-extension by casting to u32.
Reported-by: Stan Johnson <userm57@yahoo.com> Closes: https://lists.debian.org/debian-68k/2024/08/msg00000.html Fixes: 6aabc1facdb2 ("m68k: Implement copy_thread_tls()") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/3463f1e5d4e95468dc9f3368f2b78ffa7b72199b.1723335149.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: 5a2308da9f60 ("riscv: Add Canaan Kendryte K210 reset controller") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-2-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt") Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
Zero and negative number is not a valid IRQ for in-kernel code and the
irq_of_parse_and_map() function returns zero on error. So this check for
valid IRQs should only accept values > 0.
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c0b (block: allow partitions on host aware zone devices) Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Utilize the %pe print specifier to get the symbolic error name as a
string (i.e "-ENOMEM") in the log message instead of the error code to
increase its readablility.
This change was suggested in
https://lore.kernel.org/all/92972476-0b1f-4d0a-9951-af3fc8bc6e65@suswa.mountain/
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492
__call_rcu_common kernel/rcu/tree.c:2712 [inline]
call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826
ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105
ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
The buggy address belongs to the object at ffff888123839d68
which belongs to the cache bfq_io_cq of size 1360
The buggy address is located 336 bytes inside of
freed 1360-byte region [ffff888123839d68, ffff88812383a2b8)
Clang static checker (scan-build) warning:
net/tipc/bcast.c:305:4:
The expression is an uninitialized value. The computed value will also
be garbage [core.uninitialized.Assign]
305 | (*cong_link_cnt)++;
| ^~~~~~~~~~~~~~~~~~
tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt
is uninitialized. Although it won't really cause a problem, it's better
to fix it.
Fixes: dca4a17d24ee ("tipc: fix potential hanging after b/rcast changing") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Justin Stitt <justinstitt@google.com> Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
