Emil Tantilov [Wed, 6 May 2026 21:48:12 +0000 (14:48 -0700)]
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d2366 ("idpf: negotiate PTP capabilities and get PTP clock") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matt Vollrath [Wed, 6 May 2026 21:48:10 +0000 (14:48 -0700)]
i40e: Cleanup PTP registration on probe failure
Fix two conditions which would leak PTP registration on probe failure:
1. i40e_setup_pf_switch can encounter an error in
i40e_setup_pf_filter_control, call i40e_ptp_init, then return
non-zero, sending i40e_probe to err_vsis.
2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to
err_vsis.
Both of these conditions have been present since PTP was introduced in
this driver.
Found with coccinelle.
Fixes: beb0dff1251db ("i40e: enable PTP") Signed-off-by: Matt Vollrath <tactii@gmail.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir [Wed, 6 May 2026 23:37:45 +0000 (16:37 -0700)]
net: shaper: Reject reparenting of existing nodes
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
Alice Ryhl [Wed, 6 May 2026 20:07:13 +0000 (20:07 +0000)]
genetlink: free the skb on 'group >= family->n_mcgrps'
These methods generally consume ownership of the provided skb, so even
if an error path is encountered, the skb is freed. This is because the
very first thing they do after some initial setup is to unconditionally
consume the skb via consume_skb(skb). Any subsequent errors lead to the
core netlink layer freeing the skb.
However, there is one check that occurs before ownership is passed,
which is the check for the group index. So if this error condition is
encountered, then the skb is leaked. This error condition is generally
considered a violation of the netlink API, so it's not expected to occur
under normal circumstances. For the same reason, no callers check for
this error condition, and no callers need to be adjusted. However, we
should still follow the same ownership semantics of the rest of the
function. Thus, free the skb in this codepath.
Ilya Maximets [Thu, 7 May 2026 12:04:26 +0000 (14:04 +0200)]
net: nsh: fix incorrect header length macros
NSH header length is a 6-bit field that encodes the total length of
the header in 4-byte words. So the maximum length is 0b111111 * 4,
which is 252 and not 256. The maximum context length is the same
number minus the length of the base header (8), so 244.
These macros are used to validate push_nsh() action in openvswitch.
Miscalculation here doesn't cause any real issues. In the worst case
the oversized context is truncated while building the header, so we'll
construct and send a broken packet, which is not a big problem, as any
receiver should validate the fields. No invalid memory accesses will
happen during the header push. But we should fix the macros to reject
the incorrect actions in the first place.
Using previously defined values and calculating the length instead
of defining numbers directly, so it's easier to understand where they
come from and harder to make a mistake.
Quan Sun [Thu, 7 May 2026 13:17:38 +0000 (21:17 +0800)]
net: ethtool: fix NULL pointer dereference in phy_reply_size
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92b9 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump") Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolas Ferre [Thu, 7 May 2026 12:04:44 +0000 (14:04 +0200)]
MAINTAINERS: change maintainers for macb Ethernet driver
I would like to hand over the macb maintenance to Théo, as I'm unable to
keep up with the recent flow of patches for this driver. After speaking
with Claudiu, he indicated that he is in the same position as me.
To help with this work, Conor has agreed to act as a reviewer.
I was given responsibility for this driver years ago, and I'm glad to
see it continue with talented developers.
Dragos Tatulea [Wed, 6 May 2026 09:08:08 +0000 (09:08 +0000)]
net: napi: Avoid gro timer misfiring at end of busypoll
When in irq deferral mode (defer-hard-irqs > 0), a short enough
gro-flush timeout can trigger before NAPI_STATE_SCHED is cleared if the
last poll in busy_poll_stop() takes too long. This can have the effect
of leaving the queue stuck with interrupts disabled and no timer armed
which results in a tx timeout if there is no subsequent busypoll cycle.
To prevent this, defer the gro-flush timer arm after the last poll.
Fixes: 7fd3253a7de6 ("net: Introduce preferred busy-polling") Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20260506090808.820559-2-dtatulea@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
ipv6: flowlabel: per-netns budget for unprivileged callers
From: Maoyi Xie <maoyi.xie@ntu.edu.sg>
This series fixes the cross-tenant DoS in net/ipv6/ip6_flowlabel.c.
v1 through v6 were single-patch postings, each in its own thread.
v6 review pointed out that the existing fl_size read in
mem_check() and the corresponding write in fl_intern() are not in
the same critical section. v7 split the work into 2 patches.
Patch 1/2 is a prerequisite. It moves spin_lock_bh(&ip6_fl_lock)
and the matching unlock from fl_intern() into its only caller
ipv6_flowlabel_get(), so the mem_check() call runs under the same
critical section as the fl_intern() insert. With all writers and
the read of fl_size under the lock, fl_size is converted from
atomic_t to plain int. This is independent of the per-netns
budget. It also makes 2/2 backportable without conflicts.
Patch 2/2 is the v6 patch, rebased on 1/2.
- flowlabel_count is plain int rather than atomic_t, since the
previous patch put all writers and readers under ip6_fl_lock.
- In ip6_fl_gc(), fl_free() is now placed below the fl_size
and flowlabel_count decrements, removing the v6 cache of
fl->fl_net.
- In ip6_fl_purge(), fl_free() stays in its original position.
The function argument net is used for flowlabel_count.
- mem_check() uses spaces around the / operator on all four
expressions, addressing the checkpatch note in v6 review.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
Reproducer (KASAN VM, 4 cores, qemu): unprivileged netns A holds
3072 flowlabels via 100 procs. Fresh unprivileged netns B then
allocates 32 flowlabels (the FL_MAX_PER_SOCK ceiling for one
socket), the same as a clean baseline. Without the per-netns
ceiling, netns A could push fl_size past FL_MAX_SIZE - FL_MAX_SIZE
/ 4 and netns B would see allocations denied.
====================
Maoyi Xie [Wed, 6 May 2026 08:24:16 +0000 (16:24 +0800)]
ipv6: flowlabel: enforce per-netns limit for unprivileged callers
fl_size, fl_ht and ip6_fl_lock in net/ipv6/ip6_flowlabel.c are
file scope and shared across netns. mem_check() reads fl_size to
decide whether to deny non-CAP_NET_ADMIN callers. capable() runs
against init_user_ns, so an unprivileged user in any non-init
userns can push fl_size past FL_MAX_SIZE - FL_MAX_SIZE / 4 and
starve every other unprivileged userns on the host.
Add struct netns_ipv6::flowlabel_count, bumped and decremented
next to fl_size in fl_intern, ip6_fl_gc and ip6_fl_purge. The new
field fills the existing 4-byte hole after ipmr_seq, so struct
netns_ipv6 stays the same size on 64-bit builds.
Bump FL_MAX_SIZE from 4096 to 8192. It has been 4096 since the
file was added. Machines and connection counts have grown.
mem_check() folds an extra per-netns ceiling into the existing
non-CAP_NET_ADMIN conditional. The ceiling is half of the total
budget that unprivileged callers have ever been able to use, i.e.
(FL_MAX_SIZE - FL_MAX_SIZE / 4) / 2 = 3072 entries. With
FL_MAX_SIZE doubled, this preserves the original per-user reach
of 3K (what an unprivileged caller could already obtain before
this change), while forcing an attacker to spread allocations
across at least two netns to exhaust the global non-CAP_NET_ADMIN
budget.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
The previous patch took ip6_fl_lock across mem_check and
fl_intern, so the new flowlabel_count read in mem_check and the
new flowlabel_count++ in fl_intern run under the same critical
section. flowlabel_count is therefore plain int, like fl_size.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg> Link: https://patch.msgid.link/20260506082416.2259567-3-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maoyi Xie [Wed, 6 May 2026 08:24:15 +0000 (16:24 +0800)]
ipv6: flowlabel: take ip6_fl_lock across mem_check and fl_intern
mem_check() in net/ipv6/ip6_flowlabel.c reads fl_size without
holding ip6_fl_lock. fl_intern() takes the lock immediately
afterwards. The two checks therefore race against concurrent
fl_intern, ip6_fl_gc and ip6_fl_purge writers, which makes the
mem_check budget check approximate.
Move spin_lock_bh(&ip6_fl_lock) and the matching unlock from
fl_intern() into its only caller ipv6_flowlabel_get(). The
mem_check() call now runs under the same critical section as the
fl_intern() insert, so the budget check is exact.
With all writers and the read of fl_size under ip6_fl_lock,
convert fl_size from atomic_t to plain int. The four sites that
update or read fl_size are fl_intern (insert path), ip6_fl_gc
(garbage collector, the !sched check and the per-entry decrement),
ip6_fl_purge (per-netns purge), and mem_check (budget check), and
all four now run under ip6_fl_lock.
This is a prerequisite for adding a per-netns budget alongside
fl_size. The follow-up patch adds netns_ipv6::flowlabel_count and
folds it into mem_check().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg> Link: https://patch.msgid.link/20260506082416.2259567-2-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MAINTAINERS: Add self for the 3c509 network driver
It appears there's a need for a maintainer for the 3Com EtherLink III
family of Ethernet network adapters. There is documentation available
and the driver is very mature so the task ought to be of little hassle,
so I think I should be able to squeeze in any issues to be addressed.
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer.
Daniel Machon [Wed, 6 May 2026 07:25:39 +0000 (09:25 +0200)]
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Linus Torvalds [Thu, 7 May 2026 15:55:15 +0000 (08:55 -0700)]
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Linus Torvalds [Thu, 7 May 2026 15:43:25 +0000 (08:43 -0700)]
Merge tag 'pmdomain-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- Fix detach procedure for virtual devices in genpd
- mediatek: Fix use-after-free in scpsys_get_bus_protection_legacy()
* tag 'pmdomain-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy()
pmdomain: core: Fix detach procedure for virtual devices in genpd
Joey Lu [Wed, 6 May 2026 08:46:13 +0000 (16:46 +0800)]
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: Damiano Melotti <melotti@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen [Tue, 5 May 2026 17:39:26 +0000 (10:39 -0700)]
net: phy: broadcom: Save PHY counters during suspend
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d3b ("net: phy: broadcom: Add support code for reading PHY counters") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
D. Wythe [Wed, 6 May 2026 01:41:05 +0000 (09:41 +0800)]
net/smc: fix missing sk_err when TCP handshake fails
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Jiexun Wang [Wed, 6 May 2026 14:08:23 +0000 (22:08 +0800)]
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf92 ("af_unix: Add OOB support") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Suggested-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bobby Eshleman [Tue, 5 May 2026 01:42:11 +0000 (18:42 -0700)]
eth: fbnic: fix double-free of PCS on phylink creation failure
fbnic_phylink_create() stores the newly allocated PCS in fbn->pcs and
then calls phylink_create(). When phylink_create() fails, the error path
correctly destroys the PCS via xpcs_destroy_pcs(), but the caller,
fbnic_netdev_alloc(), responds by invoking fbnic_netdev_free() which
calls fbnic_phylink_destroy(). That function finds fbn->pcs non-NULL and
calls xpcs_destroy_pcs() a second time on the already-freed object,
triggering a refcount underflow use-after-free:
Instead of calling fbnic_phylink_destroy(), the prior initialization of
netdev should just be unrolled with free_netdev() and clearing
fbd->netdev.
Clearing fbd->netdev to NULL avoids UAF in init_failure_mode where
callers guard by checking !fbd->netdev, such as fbnic_mdio_read_pmd().
These callers remain active even after a failed probe, so fdb->netdev
still needs to be cleared.
Linus Torvalds [Thu, 7 May 2026 05:02:28 +0000 (22:02 -0700)]
Merge tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbdirect.h
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
Linus Torvalds [Thu, 7 May 2026 03:44:03 +0000 (20:44 -0700)]
Merge tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de> Signed-off-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
When looking at the maximum RTO amongst the subflows, inactive subflows
were taken into account: that includes stale ones, and the initial one
if it has been already been closed.
Unusable subflows are now simply skipped. Stale ones are used as an
alternative: if there are only stale ones, to take their maximum RTO and
avoid to eventually fallback to net.mptcp.add_addr_timeout, which is set
to 2 minutes by default.
Fixes: 30549eebc4d8 ("mptcp: make ADD_ADDR retransmission timeout adaptive") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-7-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer.
ADD_ADDR can be sent for the ID 0, which corresponds to the local
address and port linked to the initial subflow.
Indeed, this address could be removed, and re-added later on, e.g. what
is done in the "delete re-add signal" MPTCP Join selftests. So no reason
to ignore it.
mptcp: pm: kernel: correctly retransmit ADD_ADDR ID 0
When adding the ADD_ADDR to the list, the address including the IP, port
and ID are copied. On the other hand, when the endpoint corresponds to
the one from the initial subflow, the ID is set to 0, as specified by
the MPTCP protocol.
The issue is that the ID was reset after having copied the ID in the
ADD_ADDR entry. So the retransmission was done, but using a different ID
than the initial one.
Eric Dumazet [Tue, 5 May 2026 13:32:33 +0000 (13:32 +0000)]
inetpeer: add a missing read_seqretry() in inet_getpeer()
When performing a lockless lookup over the inet_peer rbtree,
if a matching node is found, inet_getpeer() returns it immediately
without validating the seqlock sequence.
This missing check introduces a race condition:
Trigger Path: When a host receives an incoming fragmented IPv4 packet,
ip4_frag_init() (in net/ipv4/ip_fragment.c) calls inet_getpeer_v4()
to track the peer.
The Race: If the packet is from a new source IP, CPU A acquires the
write_seqlock, allocates a new inet_peer node (p), sets its IP address
(daddr), and links it to the rbtree (rb_link_node).
Uninitialized Access: Due to the lack of memory barriers between
rb_link_node and the initialization of the rest of the struct
(like refcount_set(&p->refcnt, 1)), CPU A can make the node visible
to readers before its refcnt is initialized.
This is especially true on weakly-ordered architectures like ARM64
where the CPU can reorder the memory stores.
Lockless Reader: Concurrently, CPU B processes a second fragmented packet
from the same source IP. CPU B does a lockless lookup, finds the newly
inserted node, and returns it immediately.
Use-After-Free (UAF): CPU B reads p->refcnt as uninitialized garbage
(left over from previous kmalloc-128/192 allocations).
If the garbage is > 0, refcount_inc_not_zero(&p->refcnt) succeeds.
CPU A then executes refcount_set(&p->refcnt, 1), overwriting CPU B's increment.
When CPU B finishes with the fragment queue, it calls inet_putpeer(),
which drops the refcount to 0 and frees the node via RCU.
The node is now freed but remains linked in the rbtree,
resulting in a Use-After-Free in the rbtree.
Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Reported-by: Damiano Melotti <melotti@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260505133233.3039575-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
netdevsim: psp: fix init and uninit bugs
This series has three fixes. The first is a straightforward NULL
pointer dereference that is reachable by creating and destroying some
vfs on a kernel with INET_PSP enabled.
The last two patches deal with nsim_psp_rereg_write(), which is a
debugfs handler that reregisters netdevsim's psp_dev without
aquiescing and disabling tx/rx processing. This was added to enable
some tests in psp.py where a psp device is unregistered while it still
referenced by tcp socket state.
There are two issues with this code:
1. Calls to nsim_psp_uninit() are not properly serialized
2. netdevsim's psp_dev refcount can be released while nsim_do_psp() is
reading from it.
====================
Daniel Zahka [Tue, 5 May 2026 10:42:25 +0000 (03:42 -0700)]
netdevsim: psp: rcu protect psp_dev reference
There are two issues with the way psp_dev is used in nsim_do_psp():
1. There is no check for IS_ERR() on the peers psp_dev, before
dereferencing.
2. The refcount on this psp_dev can be dropped by
nsim_psp_rereg_write()
To fix this, we can make netdevsim's reference to its psp_dev an rcu
reference, and then nsim_do_psp() can read the fields it needs from an
rcu critical section.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-3-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka [Tue, 5 May 2026 10:42:24 +0000 (03:42 -0700)]
netdevsim: psp: serialize calls to nsim_psp_uninit()
The debugfs write handler, nsim_psp_rereg_write(), can race against
nsim_destroy() and against itself, causing nsim_psp_uninit() to run
more than once concurrently. Two complementary changes serialize all
callers:
1. Delete the psp_rereg debugfs file from nsim_psp_uninit() before
doing the actual teardown. debugfs_remove() drains any in-flight
writers and prevents new ones from starting.
2. Add a mutex around the body of nsim_psp_rereg_write() so that two
concurrent userspace writers cannot both enter the teardown path
at once.
The teardown work itself is moved into a new __nsim_psp_uninit() that
the rereg handler calls under the mutex, while the public
nsim_psp_uninit() wraps it with the debugfs_remove()/mutex_destroy()
pair so nsim_destroy() doesn't have to know about the psp internals.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-2-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka [Tue, 5 May 2026 10:42:23 +0000 (03:42 -0700)]
netdevsim: psp: only call nsim_psp_uninit() on PFs
VFs go through nsim_init_netdevsim_vf() which never calls
nsim_psp_init(), so ns->psp.dev stays NULL. nsim_psp_uninit() guards
with !IS_ERR(ns->psp.dev), so destroying a VF reaches
psp_dev_unregister(NULL) and dereferences NULL on the first
mutex_lock(&psd->lock):
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-1-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1. Fix an IPv6 encapsulation error path that leaked route references
when UDPv6 ESP decapsulation resolved to an error route.
From Yilin Zhu.
2. Fix AH with ESN on async crypto paths by accounting for the extra
high-order sequence number when reconstructing the temporary
authentication layout in the completion callbacks.
From Michael Bomarito.
3. Fix XFRM output so it does not overwrite already-correct inner header
pointers when a tunnel layer such as VXLAN has already saved them.
The fix comes with new selftests. From Cosmin Ratiu.
4. Add the missing native payload size entry for XFRM_MSG_MAPPING in the
compat translation path. From Ruijie Li.
5. Harden __xfrm_state_delete() against repeated or inconsistent unhashing
of state list nodes by keying the removal on actual list membership and
using delete-and-init helpers. From Michal Kosiorek.
6. Prevent ESP from decrypting shared splice-backed skb fragments in place
by marking UDP splice frags as shared and forcing copy-on-write in ESP
input when needed. From Kuan-Ting Chen.
* tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: esp: avoid in-place decrypt on shared skb frags
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
xfrm: provide message size for XFRM_MSG_MAPPING
xfrm: Don't clobber inner headers when already set
tools/selftests: Add a VXLAN+IPsec traffic test
tools/selftests: Use a sensible timeout value for iperf3 client
xfrm: ah: account for ESN high bits in async callbacks
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
====================
Jakub Kicinski [Wed, 6 May 2026 23:10:02 +0000 (16:10 -0700)]
Merge tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Bluetooth: HIDP: serialise l2cap_unregister_user via hidp_session_sem
Commit dbf666e4fc9b ("Bluetooth: HIDP: Fix possible UAF") made
hidp_session_remove() drop the L2CAP reference and set
session->conn = NULL once the session is considered removed, and
added a bare if (session->conn) guard around the kthread-exit
l2cap_unregister_user() call in hidp_session_thread(). The sibling
ioctl site in hidp_connection_del() still reads session->conn
unlocked and unguarded, and the kthread-exit guard itself is a
lockless double-read.
hidp_session_find() drops hidp_session_sem before returning, so
hidp_session_remove() can null session->conn between the lookup and
the call in hidp_connection_del(). Worse, since commit 752a6c9596dd
("Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user")
takes mutex_lock(&conn->lock) inside l2cap_unregister_user(), a
stale non-NULL snapshot also UAFs on conn->lock. v1 only added an
if (session->conn) guard at the ioctl site, which doesn't address
either race; Luiz suggested snapshotting session->conn under the
sem and clearing it before the call.
Taking hidp_session_sem across l2cap_unregister_user() would be
wrong: l2cap_conn_del() already establishes the lock order
conn->lock -> hidp_session_sem
via l2cap_unregister_all_users() -> user->remove ==
hidp_session_remove(), so taking hidp_session_sem before conn->lock
would AB/BA deadlock.
Factor a helper hidp_session_unregister_conn() that under
down_write(&hidp_session_sem) snapshots session->conn and clears
the member, then outside the sem calls l2cap_unregister_user() and
l2cap_conn_put() on the snapshot. Call it from both
hidp_connection_del() and hidp_session_thread()'s exit path. At
most one consumer wins the write-sem; later callers observe
session->conn == NULL and skip the unregister and put, so the
reference hidp_session_new() took via l2cap_conn_get() is consumed
exactly once. session_free() already tolerates a NULL session->conn.
Fixes: dbf666e4fc9b ("Bluetooth: HIDP: Fix possible UAF") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/all/20260422011437.176643-1-michael.bommarito@gmail.com/ Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sizeof(conn->num_bis) is wrong - it would make sense to either use
conn->num_bis (before setting that to 0) or sizeof(conn->bis).
Fix it by using sizeof(conn->bis), the least intrusive change.
Luckily, nothing actually depends on this memset() working properly:
Nothing seems to ever read from conn->bis beyond conn->num_bis, and when
conn->num_bis is increased, the corresponding elements of conn->bis are
initialized. So I think this line could also just be removed.
This is a purely theoretical fix and should have no impact on actual
behavior.
Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: RFCOMM: pull credit byte with skb_pull_data()
rfcomm_recv_data() treats the first payload byte as a credit field when
the UIH frame carries PF and credit-based flow control is enabled.
After the header has been stripped, the PF/CFC path consumes that byte
with a direct skb->data dereference followed by skb_pull(). A malformed
short frame can reach this path without a byte available.
Use skb_pull_data() so the length check and pull happen together before
the returned credit byte is consumed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them.
Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani <tristan@talencesecurity.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: ISO: Fix data-race on iso_pi(sk) in socket and HCI event paths
Several iso_pi(sk) fields (qos, qos_user_set, bc_sid, base, base_len,
sync_handle, bc_num_bis) are written under lock_sock in
iso_sock_setsockopt() and iso_sock_bind(), but read and written under
hci_dev_lock only in two other paths:
- iso_connect_bis() / iso_connect_cis(), invoked from connect(2),
read qos/base/bc_sid and reset qos to default_qos on the
qos_user_set validation failure -- all without lock_sock.
- iso_connect_ind(), invoked from hci_rx_work, writes sync_handle,
bc_sid, qos.bcast.encryption, bc_num_bis, base and base_len on
PA_SYNC_ESTABLISHED / PAST_RECEIVED / BIG_INFO_ADV_REPORT /
PER_ADV_REPORT events. The BIG_INFO handler additionally passes
&iso_pi(sk)->qos together with sync_handle / bc_num_bis / bc_bis
to hci_conn_big_create_sync() while setsockopt may be mutating
them.
Acquire lock_sock around the affected accesses in both paths.
The locking order hci_dev_lock -> lock_sock matches the existing
iso_conn_big_sync() precedent, whose comment documents the same
requirement for hci_conn_big_create_sync(). The HCI connect/bind
helpers do not wait for command completion -- they enqueue work via
hci_cmd_sync_queue{,_once}() / hci_le_create_cis_pending() and
return -- so the added hold time is comparable to iso_conn_big_sync().
KCSAN report:
BUG: KCSAN: data-race in iso_connect_cis / iso_sock_setsockopt
read to 0xffffa3ae8ce3cdc8 of 1 bytes by task 335 on cpu 0:
iso_connect_cis+0x49f/0xa20
iso_sock_connect+0x60e/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffffa3ae8ce3cdc8 of 60 bytes by task 334 on cpu 1:
iso_sock_setsockopt+0x69a/0x930
do_sock_setsockopt+0xc3/0x170
__sys_setsockopt+0xd1/0x130
__x64_sys_setsockopt+0x64/0x80
x64_sys_call+0x1547/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 334 Comm: iso_setup_race Not tainted 7.0.0-10949-g8541d8f725c6 #44 PREEMPT(lazy)
The iso_connect_ind() races were found by inspection.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: ISO: Fix data-race on dst in iso_sock_connect()
iso_sock_connect() copies the destination address into
iso_pi(sk)->dst under lock_sock, then releases the lock and reads
it back with bacmp() to decide between the CIS and BIS connect
paths:
if (bacmp(&iso_pi(sk)->dst, BDADDR_ANY)) // <- no lock held
This read after release_sock() races with any concurrent write to
iso_pi(sk)->dst on the same socket.
Fix by reading the destination address directly from the local
sockaddr argument (sa->iso_bdaddr) instead of iso_pi(sk)->dst.
Since sa is a function-local argument, reading it requires no
locking and avoids the race.
This patch addresses only the bacmp() race in iso_sock_connect();
other unprotected iso_pi(sk) accesses are fixed separately in the
next patch.
KCSAN report:
BUG: KCSAN: data-race in memcmp+0x39/0xb0
race at unknown origin, with read to 0xffff8f96ea66dde3 of 1 bytes by task 549 on cpu 1:
memcmp+0x39/0xb0
iso_sock_connect+0x275/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00 -> 0xee
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 549 Comm: iso_race_combin Not tainted 7.0.0-08391-g1d51b370a0f8 #40 PREEMPT(lazy)
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_uart: Fix NULL deref in recv callbacks when priv is uninitialized
When a fault is injected during hci_uart line discipline setup, the
proto open() callback may fail leaving hu->priv as NULL. A subsequent
TIOCSTI ioctl can trigger the recv() callback before priv is
initialized, causing a NULL pointer dereference.
Fix all four affected HCI UART protocol drivers by adding a NULL check
on hu->priv at the start of their recv() callbacks: h4, h5, ath and
bcsp.
Reported-by: syzbot+ff30eeab8e07b37d524e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ff30eeab8e07b37d524e Signed-off-by: Aurelien DESBRIERES <aurelien@hackers.camp> Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btintel_pcie: treat boot stage bit 12 as warning
CSR boot stage register bit 12 is documented as a device warning,
not a fatal error. Rename the bit definition accordingly and stop
including it in btintel_pcie_in_error().
This keeps warning-only boot stage values from being classified as
errors while preserving abort-handler state as the actual error
condition.
Fixes: 190377500fde ("Bluetooth: btintel_pcie: Dump debug registers on error") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sat, 18 Apr 2026 15:41:12 +0000 (18:41 +0300)]
Bluetooth: SCO: hold sk properly in sco_conn_ready
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524a0 ("Bluetooth: Store latency and supervision timeout in connection params") Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dudu Lu [Wed, 15 Apr 2026 10:43:55 +0000 (18:43 +0800)]
Bluetooth: l2cap: fix MPS check in l2cap_ecred_reconf_req
The L2CAP specification states that if more than one channel is being
reconfigured, the MPS shall not be decreased. The current check has
two issues:
1) The comparison uses >= (greater-than-or-equal), which incorrectly
rejects reconfiguration requests where the MPS stays the same.
Since the spec says MPS "shall be greater than or equal to the
current MPS", only a strict decrease (remote_mps > mps) should be
rejected. Keeping the same MPS is valid.
2) The multi-channel guard uses `&& i` (loop index) to approximate
"more than one channel", but this incorrectly allows MPS decrease
for the first channel (i==0) even when multiple channels are being
reconfigured. Replace with `&& num_scid > 1` which correctly
checks whether the request covers more than one channel.
Fixes: 7accb1c4321a ("Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dudu Lu [Wed, 15 Apr 2026 09:39:53 +0000 (17:39 +0800)]
Bluetooth: bnep: fix incorrect length parsing in bnep_rx_frame() extension handling
In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and
BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs:
1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which
performs a native-endian read. The BNEP protocol specifies this field
in big-endian (network byte order), and the same file correctly uses
get_unaligned_be16() for the identical fields in
bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter().
2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where
the length byte counts UUID pairs (requiring * 2 for two UUIDs per
entry), the filter extension length field already represents the total
data size in bytes. This is confirmed by bnep_ctrl_set_netfilter()
which reads the same field as a byte count and divides by 4 to get
the number of filter entries.
The bogus * 2 means skb_pull advances twice as far as it should,
either dropping valid data from the next header or causing the pull
to fail entirely when the doubled length exceeds the remaining skb.
Fix by splitting the pull into two steps: first use skb_pull_data() to
safely pull and validate the 3-byte fixed header (ctrl type + length),
then pull the variable-length data using the properly decoded length.
Fixes: bf8b9a9cb77b ("Bluetooth: bnep: Add support to extended headers of control frames") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes") Cc: stable@vger.kernel.org Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
David Carlier [Sun, 12 Apr 2026 20:29:16 +0000 (21:29 +0100)]
Bluetooth: hci_conn: fix potential UAF in create_big_sync
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del().
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Cc: stable@vger.kernel.org Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sun, 12 Apr 2026 18:47:42 +0000 (21:47 +0300)]
Bluetooth: SCO: fix sleeping under spinlock in sco_conn_ready
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- Fix build failures introduced when allowing to build 32-/64-bit only
VDSO
- Switch to dynamic parisc root device to avoid upcoming warnings
- Fix IRQ leak in LASI driver
* tag 'parisc-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix IRQ leak in LASI driver
parisc: Fix 64-bit kernel build when CONFIG_COMPAT=n
parisc: Fix build failure for 32-bit kernel with PA2.0 instruction set
parisc: drivers: switch to dynamic root device
Revert "parisc: led: fix reference leak on failed device registration"
Jakub Kicinski [Wed, 6 May 2026 14:29:31 +0000 (07:29 -0700)]
Merge tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Linus Torvalds [Wed, 6 May 2026 14:27:30 +0000 (07:27 -0700)]
Merge tag 'efi-fixes-for-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix issues in EFI graceful recovery on x86 introduced by changes to
the kernel mode FPU APIs
- I-cache coherency fixes for the LoongArch EFI stub
- Locking fix for EFI pstore
- Code tweak for efivarfs
* tag 'efi-fixes-for-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: Restore IRQ state in EFI page fault handler
x86/efi: Fix graceful fault handling after FPU softirq changes
efi/libstub: Synchronize instruction cache after kernel relocation
efi/loongarch: Implement efi_cache_sync_image()
efi/libstub: Move efi_relocate_kernel() into its only remaining user
efi: pstore: Drop efivar lock when efi_pstore_open() returns with an error
efivarfs: use QSTR() in efivarfs_alloc_dentry
Takashi Iwai [Wed, 6 May 2026 14:10:00 +0000 (16:10 +0200)]
Merge tag 'asoc-fix-v7.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
Another batch of fixes, plus a couple of quirks (mostly AMD ones, as has
been the case recently). All driver changes, including fixes for the
KUnit tests for the Cirrus drivers that could cause memory corruption.
ASoC: cs35l56: Don't use devres to unregister component
Manually call snd_soc_unregister_component() from cs35l56_remove()
instead of using devres cleanup. This ensures that the component is
destroyed before cs35l56_remove() starts cleanup of anything the
component code could be using.
Devres cleanup happens after the driver remove() callback, so if
snd_soc_register_component() is used, it will not be destroyed until
after cs35l56_remove() has returned. But there is some cleanup that
must be done in cs35l56_remove(), or wrapped in a custom devres
cleanup handler to ensure correct ordering. The simplest option is
to call snd_soc_unregister_component() at the start of cs35l56_remove().
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Closes: https://sashiko.dev/#/patchset/20260501103002.2843735-1-rf%40opensource.cirrus.com Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260505161124.3621000-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Maoyi Xie [Wed, 6 May 2026 06:48:54 +0000 (14:48 +0800)]
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
NL80211_CMD_GET_SCAN is implemented as a multi-call dumpit. The first
invocation of nl80211_prepare_wdev_dump() validates the requested wdev
against the caller's netns via __cfg80211_wdev_from_attrs(). Subsequent
invocations look up the same wiphy by its global index and do not check
that the wiphy is still in the caller's netns.
Add the same filter to the continuation path. If the wiphy's netns no
longer matches the caller's, return -ENODEV and the netlink dump
machinery terminates the walk cleanly.
Maoyi Xie [Wed, 6 May 2026 06:48:53 +0000 (14:48 +0800)]
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
NL80211_CMD_SET_WIPHY_NETNS dispatches with GENL_UNS_ADMIN_PERM, which
verifies that the caller has CAP_NET_ADMIN for the source netns. It
doesn't verify that the caller has CAP_NET_ADMIN over the target netns
selected by NL80211_ATTR_NETNS_FD or NL80211_ATTR_PID.
This diverges from the convention enforced in
net/core/rtnetlink.c::rtnl_get_net_ns_capable():
/* For now, the caller is required to have CAP_NET_ADMIN in
* the user namespace owning the target net ns.
*/
if (!sk_ns_capable(sk, net->user_ns, CAP_NET_ADMIN))
return ERR_PTR(-EACCES);
A user with CAP_NET_ADMIN in their own user namespace can therefore
push a wiphy into an arbitrary netns (including init_net) over which
they have no privilege.
Mirror the rtnetlink convention by requiring CAP_NET_ADMIN in the
target netns before calling cfg80211_switch_netns().
This is documented as a u8 and has a policy of NLA_U8, but uses
nla_get_u32() which means it's completely broken on big-endian.
Fix it to use nla_get_u8().
Johannes Berg [Tue, 5 May 2026 13:15:34 +0000 (15:15 +0200)]
wifi: mac80211: remove station if connection prep fails
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cássio Gabriel [Wed, 6 May 2026 03:34:47 +0000 (00:34 -0300)]
ALSA: core: Serialize deferred fasync state checks
snd_fasync_helper() updates fasync->on under snd_fasync_lock, and
snd_fasync_work_fn() now also evaluates fasync->on under the same
lock. snd_kill_fasync() still tests the flag before taking the lock,
leaving an unsynchronized read against FASYNC enable/disable updates.
Move the enabled-state check into the locked section.
Also clear fasync->on under snd_fasync_lock in snd_fasync_free()
before unlinking the pending entry. Together with the locked sender-side
check, this publishes teardown before flushing the deferred work and
prevents a racing sender from requeueing the entry after free has
started.
Fixes: ef34a0ae7a26 ("ALSA: core: Add async signal helpers") Fixes: 8146cd333d23 ("ALSA: core: Fix potential data race at fasync handling") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Link: https://patch.msgid.link/20260506-alsa-core-fasync-on-lock-v1-1-ea48c77d6ca4@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rodrigo Faria [Tue, 5 May 2026 18:55:18 +0000 (19:55 +0100)]
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
Add a new fixup for the mute LED on the HP Pavilion 15-cs1xxx series
using the VREF on NID 0x1b.
The BIOS on these models (tested up to F.32) incorrectly reports
the mute LED on NID 0x18 via DMI OEM strings, which lacks VREF
capabilities. This fixup overrides the LED pin to the correct
NID 0x1b.
Cássio Gabriel [Wed, 6 May 2026 03:15:48 +0000 (00:15 -0300)]
ALSA: seq: Fix UMP group 16 filtering
The sequencer UAPI defines group_filter as an unsigned int bitmap.
Bit 0 filters groupless messages and bits 1-16 filter UMP groups 1-16.
The internal snd_seq_client storage is only unsigned short, so bit 16
is truncated when userspace sets the filter. The same truncation affects
the automatic UMP client filter used to avoid delivery to inactive
groups, so events for group 16 cannot be filtered.
Store the internal bitmap as unsigned int and keep both userspace-provided
and automatically generated values limited to the defined UAPI bits.
Linus Torvalds [Wed, 6 May 2026 02:44:46 +0000 (19:44 -0700)]
Merge tag 'loongarch-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build and runtime issues after 32BIT Kconfig option enabled,
improve the platform-specific PCI controller compatibility, drop
custom __arch_vdso_hres_capable(), and fix a lot of KVM bugs"
* tag 'loongarch-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Move unconditional delay into timer clear scenery
LoongArch: KVM: Fix HW timer interrupt lost when inject interrupt by software
LoongArch: KVM: Move AVEC interrupt injection into switch loop
LoongArch: KVM: Use kvm_set_pte() in kvm_flush_pte()
LoongArch: KVM: Fix missing EMULATE_FAIL in kvm_emu_mmio_read()
LoongArch: KVM: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
LoongArch: KVM: Fix "unreliable stack" for kvm_exc_entry
LoongArch: KVM: Compile switch.S directly into the kernel
LoongArch: vDSO: Drop custom __arch_vdso_hres_capable()
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
LoongArch: Use per-root-bridge PCIH flag to skip mem resource fixup
LoongArch: Fix SYM_SIGFUNC_START definition for 32BIT
LoongArch: Specify -m32/-m64 explicitly for 32BIT/64BIT
LoongArch: Make CONFIG_64BIT as the default option
Jason Xing [Sat, 2 May 2026 20:07:22 +0000 (23:07 +0300)]
xsk: fix u64 descriptor address truncation on 32-bit architectures
In copy mode TX, xsk_skb_destructor_set_addr() stores the 64-bit
descriptor address into skb_shinfo(skb)->destructor_arg (void *) via a
uintptr_t cast:
On 32-bit architectures uintptr_t is 32 bits, so the upper 32 bits of
the descriptor address are silently dropped. In XDP_ZEROCOPY unaligned
mode the chunk offset is encoded in bits 48-63 of the descriptor
address (XSK_UNALIGNED_BUF_OFFSET_SHIFT = 48), meaning the offset is
lost entirely. The completion queue then returns a truncated address to
userspace, making buffer recycling impossible.
Fix this by handling the 32-bit case directly in
xsk_skb_destructor_set_addr(): when !CONFIG_64BIT, allocate an
xsk_addrs struct (the same path already used for multi-descriptor
SKBs) to store the full u64 address. The existing tagged-pointer logic
in xsk_skb_destructor_is_addr() stays unchanged: slab pointers returned
from kmem_cache_zalloc() are always word-aligned and therefore have
bit 0 clear, which correctly identifies them as a struct pointer
rather than an inline tagged address on every architecture.
Factor the shared kmem_cache_zalloc + destructor_arg assignment into
__xsk_addrs_alloc() and add a wrapper xsk_addrs_alloc() that handles
the inline-to-list upgrade (is_addr check + get_addr + num_descs = 1).
The three former open-coded kmem_cache_zalloc call sites now reduce to
a single call each.
Propagate the -ENOMEM from xsk_skb_destructor_set_addr() through
xsk_skb_init_misc() so the caller can clean up the skb via kfree_skb()
before skb->destructor is installed.
The overhead is one extra kmem_cache_zalloc per first descriptor on
32-bit only; 64-bit builds are completely unchanged.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/ Fixes: 0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number") Signed-off-by: Jason Xing <kernelxing@tencent.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260502200722.53960-9-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason Xing [Sat, 2 May 2026 20:07:21 +0000 (23:07 +0300)]
xsk: fix xsk_addrs slab leak on multi-buffer error path
When xsk_build_skb() / xsk_build_skb_zerocopy() sees the first
continuation descriptor, it promotes destructor_arg from an inlined
address to a freshly allocated xsk_addrs (num_descs = 1). The counter
is bumped to >= 2 only at the very end of a successful build (by calling
xsk_inc_num_desc()).
If the build fails in between (e.g. alloc_page() returns NULL with
-EAGAIN, or the MAX_SKB_FRAGS overflow hits), we jump to free_err, skip
calling xsk_inc_num_desc() to increment num_descs and leave the half-built
skb attached to xs->skb for the app to retry. The skb now has
1) destructor_arg = a real xsk_addrs pointer,
2) num_descs = 1
If the app never retries and just close()s the socket, xsk_release()
calls xsk_drop_skb() -> xsk_consume_skb(), which decides whether to
free xsk_addrs by testing num_descs > 1:
if (unlikely(num_descs > 1))
kmem_cache_free(xsk_tx_generic_cache, destructor_arg);
Because num_descs is exactly 1 the branch is skipped and the
xsk_addrs object is leaked to the xsk_tx_generic_cache slab.
Fix it by directly testing if destructor_arg is still addr. Or else it
is modified and used to store the newly allocated memory from
xsk_tx_generic_cache regardless of increment of num_desc, which we
need to handle.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/ Fixes: 0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260502200722.53960-8-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason Xing [Sat, 2 May 2026 20:07:20 +0000 (23:07 +0300)]
xsk: avoid skb leak in XDP_TX_METADATA case
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means no frag and xs->skb is
NULL) and users enable metadata feature.
2. xsk_skb_metadata() returns a error code.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'.
4. there is no chance to free this skb anymore.
Closes: https://lore.kernel.org/all/20260415085204.3F87AC19424@smtp.kernel.org/ Fixes: 30c3055f9c0d ("xsk: wrap generic metadata handling onto separate function") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260502200722.53960-7-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason Xing [Sat, 2 May 2026 20:07:19 +0000 (23:07 +0300)]
xsk: prevent CQ desync when freeing half-built skbs in xsk_build_skb()
Once xsk_skb_init_misc() has been called on an skb, its destructor is
set to xsk_destruct_skb(), which submits the descriptor address(es) to
the completion queue and advances the CQ producer. If such an skb is
subsequently freed via kfree_skb() along an error path - before the
skb has ever been handed to the driver - the destructor still runs and
submits a bogus, half-initialized address to the CQ.
Postpone the init phase when we believe the allocation of first frag is
successfully completed. Before this init, skb can be safely freed by
kfree_skb().
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/ Fixes: c30d084960cf ("xsk: avoid overwriting skb fields for multi-buffer traffic") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260502200722.53960-6-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason Xing [Sat, 2 May 2026 20:07:18 +0000 (23:07 +0300)]
xsk: fix use-after-free of xs->skb in xsk_build_skb() free_err path
When xsk_build_skb() processes multi-buffer packets in copy mode, the
first descriptor stores data into the skb linear area without adding
any frags, so nr_frags stays at 0. The caller then sets xs->skb = skb
to accumulate subsequent descriptors.
If a continuation descriptor fails (e.g. alloc_page returns NULL with
-EAGAIN), we jump to free_err where the condition:
if (skb && !skb_shinfo(skb)->nr_frags)
kfree_skb(skb);
evaluates to true because nr_frags is still 0 (the first descriptor
used the linear area, not frags). This frees the skb while xs->skb
still points to it, creating a dangling pointer. On the next transmit
attempt or socket close, xs->skb is dereferenced, causing a
use-after-free or double-free.
Fix by using a !xs->skb check to handle first frag situation, ensuring
we only free skbs that were freshly allocated in this call
(xs->skb is NULL) and never free an in-progress multi-buffer skb that
the caller still references.
Closes: https://lore.kernel.org/all/20260415082654.21026-4-kerneljasonxing@gmail.com/ Fixes: 6b9c129c2f93 ("xsk: remove @first_frag from xsk_build_skb()") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260502200722.53960-5-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / kernel / linux.git / log
