Quinn Tran [Mon, 29 Mar 2021 08:52:26 +0000 (01:52 -0700)]
scsi: qla2xxx: Fix mailbox recovery during PCIe error
For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.
Quinn Tran [Mon, 29 Mar 2021 08:52:22 +0000 (01:52 -0700)]
scsi: qla2xxx: Fix use after free in bsg
On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.
Quinn Tran [Mon, 29 Mar 2021 08:52:20 +0000 (01:52 -0700)]
scsi: qla2xxx: Fix stuck session
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arun Easi [Mon, 29 Mar 2021 08:52:19 +0000 (01:52 -0700)]
scsi: qla2xxx: Add H:C:T info in the log message for fc ports
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Tue, 23 Mar 2021 12:54:23 +0000 (13:54 +0100)]
scsi: pm8001: Avoid -Wrestrict warning
On some configurations, gcc warns about overlapping source and destination
arguments to snprintf:
drivers/scsi/pm8001/pm8001_init.c: In function 'pm8001_request_msix':
drivers/scsi/pm8001/pm8001_init.c:977:3: error: 'snprintf' argument 4 may overlap destination object 'pm8001_ha' [-Werror=restrict]
977 | snprintf(drvname, len, "%s-%d", pm8001_ha->name, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/pm8001/pm8001_init.c:962:56: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
962 | static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
I first assumed this was a gcc bug, as that should not happen, but a
reduced test case makes it clear that this happens when the loop counter is
not bounded by the array size.
Help the compiler out by adding an explicit limit here to make the code
slightly more robust and avoid the warning.
Rasmus Villemoes [Wed, 10 Mar 2021 22:16:02 +0000 (23:16 +0100)]
scsi: bnx2i: Make bnx2i_process_iscsi_error() simpler and more robust
Instead of strcpy'ing into a stack buffer, just let additional_notice point
to a string literal living in .rodata. This is better in a few ways:
- Smaller .text - instead of gcc compiling the strcpys as a bunch of
immediate stores (effectively encoding the string literal in the
instruction stream), we only pay the price of storing the literal in
.rodata.
- Faster, because there's no string copying.
- Smaller stack usage (with my compiler, 72 bytes instead of 176 for the
sole caller, bnx2i_indicate_kcqe)
Moreover, it's currently possible for additional_notice[] to get used
uninitialized, so some random stack garbage would be passed to printk() -
in the worst case without any '\0' anywhere in those 64 bytes. That could
be fixed by initializing additional_notice[0], but the same is achieved
here by initializing the new pointer variable to "".
Also give the message pointer a similar treatment - there's no point making
temporary copies on the stack of those two strings.
Bart Van Assche [Sat, 20 Mar 2021 23:23:58 +0000 (16:23 -0700)]
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
This patch fixes the following Coverity warning:
CID 361199 (#1 of 1): Unchecked return value (CHECKED_RETURN)
3. check_return: Calling qla24xx_get_isp_stats without checking return
value (as is done elsewhere 4 out of 5 times).
Link: https://lore.kernel.org/r/20210320232359.941-7-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following Coverity complaint:
CID 177490 (#1 of 1): Unused value (UNUSED_VALUE)
assigned_value: Assigning value from opcode & 0xffffff7fU to opcode
here, but that stored value is overwritten before it can be used.
Link: https://lore.kernel.org/r/20210320232359.941-6-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Sat, 20 Mar 2021 23:23:56 +0000 (16:23 -0700)]
scsi: qla2xxx: Suppress Coverity complaints about dseg_r*
Change dseq_rq and dseg_rsp from scalar structure members into
single-element arrays such that Coverity does not complain about the
(*cur_dsd)++ statement in append_dsd64().
Link: https://lore.kernel.org/r/20210320232359.941-5-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:136: warning: duplicate section name 'NOTE'
Link: https://lore.kernel.org/r/20210317091230.2912389-36-lee.jones@linaro.org Cc: Michael Cyr <mikecyr@linux.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Dave Boutcher <boutcher@us.ibm.com> Cc: Santiago Leon <santil@us.ibm.com> Cc: Linda Xie <lxie@us.ibm.com> Cc: FUJITA Tomonori <tomof@acm.org> Cc: "Nicholas A. Bellinger" <nab@kernel.org> Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:28 +0000 (09:12 +0000)]
scsi: ibmvscsi: Fix a bunch of misdocumentation
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ibmvscsi/ibmvfc.c:331: warning: Function parameter or member 'vhost' not described in 'ibmvfc_get_err_result'
drivers/scsi/ibmvscsi/ibmvfc.c:653: warning: Excess function parameter 'job_step' description in 'ibmvfc_del_tgt'
drivers/scsi/ibmvscsi/ibmvfc.c:773: warning: Function parameter or member 'queue' not described in 'ibmvfc_init_event_pool'
drivers/scsi/ibmvscsi/ibmvfc.c:773: warning: Function parameter or member 'size' not described in 'ibmvfc_init_event_pool'
drivers/scsi/ibmvscsi/ibmvfc.c:823: warning: Function parameter or member 'queue' not described in 'ibmvfc_free_event_pool'
drivers/scsi/ibmvscsi/ibmvfc.c:1413: warning: Function parameter or member 'vhost' not described in 'ibmvfc_gather_partition_info'
drivers/scsi/ibmvscsi/ibmvfc.c:1483: warning: Function parameter or member 'queue' not described in 'ibmvfc_get_event'
drivers/scsi/ibmvscsi/ibmvfc.c:1483: warning: Excess function parameter 'vhost' description in 'ibmvfc_get_event'
drivers/scsi/ibmvscsi/ibmvfc.c:1630: warning: Function parameter or member 't' not described in 'ibmvfc_timeout'
drivers/scsi/ibmvscsi/ibmvfc.c:1630: warning: Excess function parameter 'evt' description in 'ibmvfc_timeout'
drivers/scsi/ibmvscsi/ibmvfc.c:1893: warning: Function parameter or member 'shost' not described in 'ibmvfc_queuecommand'
drivers/scsi/ibmvscsi/ibmvfc.c:1893: warning: Excess function parameter 'done' description in 'ibmvfc_queuecommand'
drivers/scsi/ibmvscsi/ibmvfc.c:2324: warning: Function parameter or member 'rport' not described in 'ibmvfc_match_rport'
drivers/scsi/ibmvscsi/ibmvfc.c:2324: warning: Excess function parameter 'device' description in 'ibmvfc_match_rport'
drivers/scsi/ibmvscsi/ibmvfc.c:3133: warning: Function parameter or member 'evt_doneq' not described in 'ibmvfc_handle_crq'
drivers/scsi/ibmvscsi/ibmvfc.c:3317: warning: Excess function parameter 'reason' description in 'ibmvfc_change_queue_depth'
drivers/scsi/ibmvscsi/ibmvfc.c:3390: warning: Function parameter or member 'attr' not described in 'ibmvfc_show_log_level'
drivers/scsi/ibmvscsi/ibmvfc.c:3413: warning: Function parameter or member 'attr' not described in 'ibmvfc_store_log_level'
drivers/scsi/ibmvscsi/ibmvfc.c:3413: warning: Function parameter or member 'count' not described in 'ibmvfc_store_log_level'
drivers/scsi/ibmvscsi/ibmvfc.c:4121: warning: Function parameter or member 'done' not described in '__ibmvfc_tgt_get_implicit_logout_evt'
drivers/scsi/ibmvscsi/ibmvfc.c:4438: warning: Function parameter or member 't' not described in 'ibmvfc_adisc_timeout'
drivers/scsi/ibmvscsi/ibmvfc.c:4438: warning: Excess function parameter 'tgt' description in 'ibmvfc_adisc_timeout'
drivers/scsi/ibmvscsi/ibmvfc.c:4641: warning: Function parameter or member 'target' not described in 'ibmvfc_alloc_target'
drivers/scsi/ibmvscsi/ibmvfc.c:4641: warning: Excess function parameter 'scsi_id' description in 'ibmvfc_alloc_target'
drivers/scsi/ibmvscsi/ibmvfc.c:5068: warning: Function parameter or member 'evt' not described in 'ibmvfc_npiv_logout_done'
drivers/scsi/ibmvscsi/ibmvfc.c:5068: warning: Excess function parameter 'vhost' description in 'ibmvfc_npiv_logout_done'
Link: https://lore.kernel.org/r/20210317091230.2912389-35-lee.jones@linaro.org Cc: Tyrel Datwyler <tyreld@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:27 +0000 (09:12 +0000)]
scsi: ibmvscsi: Fix a bunch of kernel-doc related issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: Function parameter or member 'hostdata' not described in 'ibmvscsi_release_crq_queue'
drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: Function parameter or member 'max_requests' not described in 'ibmvscsi_release_crq_queue'
drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: expecting prototype for release_crq_queue(). Prototype was for ibmvscsi_release_crq_queue() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:286: warning: expecting prototype for reset_crq_queue(). Prototype was for ibmvscsi_reset_crq_queue() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:328: warning: Function parameter or member 'max_requests' not described in 'ibmvscsi_init_crq_queue'
drivers/scsi/ibmvscsi/ibmvscsi.c:328: warning: expecting prototype for initialize_crq_queue(). Prototype was for ibmvscsi_init_crq_queue() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:414: warning: expecting prototype for reenable_crq_queue(). Prototype was for ibmvscsi_reenable_crq_queue() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:536: warning: expecting prototype for ibmvscsi_free(). Prototype was for free_event_struct() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:558: warning: expecting prototype for get_evt_struct(). Prototype was for get_event_struct() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:587: warning: Function parameter or member 'evt_struct' not described in 'init_event_struct'
drivers/scsi/ibmvscsi/ibmvscsi.c:587: warning: Excess function parameter 'evt' description in 'init_event_struct'
drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'cmd' not described in 'set_srp_direction'
drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'srp_cmd' not described in 'set_srp_direction'
drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'numbuf' not described in 'set_srp_direction'
drivers/scsi/ibmvscsi/ibmvscsi.c:641: warning: Function parameter or member 'evt_struct' not described in 'unmap_cmd_data'
drivers/scsi/ibmvscsi/ibmvscsi.c:683: warning: Function parameter or member 'evt_struct' not described in 'map_sg_data'
drivers/scsi/ibmvscsi/ibmvscsi.c:757: warning: Function parameter or member 'evt_struct' not described in 'map_data_for_srp_cmd'
drivers/scsi/ibmvscsi/ibmvscsi.c:783: warning: Function parameter or member 'error_code' not described in 'purge_requests'
drivers/scsi/ibmvscsi/ibmvscsi.c:846: warning: Function parameter or member 't' not described in 'ibmvscsi_timeout'
drivers/scsi/ibmvscsi/ibmvscsi.c:846: warning: Excess function parameter 'evt_struct' description in 'ibmvscsi_timeout'
drivers/scsi/ibmvscsi/ibmvscsi.c:1043: warning: Function parameter or member 'cmnd' not described in 'ibmvscsi_queuecommand_lck'
drivers/scsi/ibmvscsi/ibmvscsi.c:1043: warning: expecting prototype for ibmvscsi_queue(). Prototype was for ibmvscsi_queuecommand_lck() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:1351: warning: expecting prototype for init_host(). Prototype was for enable_fast_fail() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:1464: warning: Function parameter or member 'hostdata' not described in 'init_adapter'
drivers/scsi/ibmvscsi/ibmvscsi.c:1475: warning: Function parameter or member 'evt_struct' not described in 'sync_completion'
drivers/scsi/ibmvscsi/ibmvscsi.c:1488: warning: Function parameter or member 'cmd' not described in 'ibmvscsi_eh_abort_handler'
drivers/scsi/ibmvscsi/ibmvscsi.c:1488: warning: expecting prototype for ibmvscsi_abort(). Prototype was for ibmvscsi_eh_abort_handler() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:1627: warning: Function parameter or member 'cmd' not described in 'ibmvscsi_eh_device_reset_handler'
drivers/scsi/ibmvscsi/ibmvscsi.c:1893: warning: Excess function parameter 'reason' description in 'ibmvscsi_change_queue_depth'
drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: Function parameter or member 'vdev' not described in 'ibmvscsi_probe'
drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: Function parameter or member 'id' not described in 'ibmvscsi_probe'
drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: expecting prototype for Called by bus code for each adapter(). Prototype was for ibmvscsi_probe() instead
drivers/scsi/ibmvscsi/ibmvscsi.c:2381: warning: cannot understand function prototype: 'const struct vio_device_id ibmvscsi_device_table[] = '
[mkp: fix checkpatch whitespace warning]
Link: https://lore.kernel.org/r/20210317091230.2912389-34-lee.jones@linaro.org Cc: Tyrel Datwyler <tyreld@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Colin DeVilbiss <devilbis@us.ibm.com> Cc: Santiago Leon <santil@us.ibm.com> Cc: Dave Boutcher <sleddog@us.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:30 +0000 (09:12 +0000)]
scsi: cxlflash: Fix some misnaming related doc-rot
Fixes the following W=1 kernel build warning(s):
drivers/scsi/cxlflash/vlun.c:48: warning: Function parameter or member 'release' not described in 'marshal_clone_to_rele'
drivers/scsi/cxlflash/vlun.c:48: warning: Excess function parameter 'rele' description in 'marshal_clone_to_rele'
drivers/scsi/cxlflash/vlun.c:238: warning: Function parameter or member 'bali' not described in 'validate_alloc'
drivers/scsi/cxlflash/vlun.c:238: warning: Excess function parameter 'ba_lun_info' description in 'validate_alloc'
drivers/scsi/cxlflash/vlun.c:308: warning: Function parameter or member 'to_clone' not described in 'ba_clone'
drivers/scsi/cxlflash/vlun.c:308: warning: Excess function parameter 'to_free' description in 'ba_clone'
drivers/scsi/cxlflash/vlun.c:369: warning: Function parameter or member 'lli' not described in 'init_vlun'
drivers/scsi/cxlflash/vlun.c:369: warning: Excess function parameter 'lun_info' description in 'init_vlun'
Link: https://lore.kernel.org/r/20210317091230.2912389-37-lee.jones@linaro.org Cc: "Manoj N. Kumar" <manoj@linux.ibm.com> Cc: "Matthew R. Ochs" <mrochs@linux.ibm.com> Cc: Uma Krishnan <ukrishn@linux.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:26 +0000 (09:12 +0000)]
scsi: cxlflash: Fix a few misnaming issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/cxlflash/superpipe.c:38: warning: Function parameter or member 'release' not described in 'marshal_rele_to_resize'
drivers/scsi/cxlflash/superpipe.c:38: warning: Excess function parameter 'rele' description in 'marshal_rele_to_resize'
drivers/scsi/cxlflash/superpipe.c:51: warning: Function parameter or member 'release' not described in 'marshal_det_to_rele'
drivers/scsi/cxlflash/superpipe.c:51: warning: Excess function parameter 'rele' description in 'marshal_det_to_rele'
drivers/scsi/cxlflash/superpipe.c:528: warning: expecting prototype for rhte_format1(). Prototype was for rht_format1() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-33-lee.jones@linaro.org Cc: "Manoj N. Kumar" <manoj@linux.ibm.com> Cc: "Matthew R. Ochs" <mrochs@linux.ibm.com> Cc: Uma Krishnan <ukrishn@linux.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:25 +0000 (09:12 +0000)]
scsi: cxlflash: Fix a little doc-rot
Fixes the following W=1 kernel build warning(s):
drivers/scsi/cxlflash/main.c:1369: warning: Function parameter or member 'hwq' not described in 'process_hrrq'
drivers/scsi/cxlflash/main.c:1369: warning: Excess function parameter 'afu' description in 'process_hrrq'
drivers/scsi/cxlflash/main.c:2005: warning: Function parameter or member 'index' not described in 'init_mc'
drivers/scsi/cxlflash/main.c:3303: warning: Function parameter or member 'lunprov' not described in 'cxlflash_lun_provision'
drivers/scsi/cxlflash/main.c:3303: warning: Excess function parameter 'arg' description in 'cxlflash_lun_provision'
drivers/scsi/cxlflash/main.c:3397: warning: Function parameter or member 'afu_dbg' not described in 'cxlflash_afu_debug'
drivers/scsi/cxlflash/main.c:3397: warning: Excess function parameter 'arg' description in 'cxlflash_afu_debug'
Link: https://lore.kernel.org/r/20210317091230.2912389-32-lee.jones@linaro.org Cc: "Manoj N. Kumar" <manoj@linux.ibm.com> Cc: "Matthew R. Ochs" <mrochs@linux.ibm.com> Cc: Uma Krishnan <ukrishn@linux.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:24 +0000 (09:12 +0000)]
scsi: isci: remote_node_table: Provide some missing params and remove others
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_node_table.c:113: warning: Function parameter or member 'group_table_index' not described in 'sci_remote_node_table_clear_group_index'
drivers/scsi/isci/remote_node_table.c:113: warning: Excess function parameter 'set_index' description in 'sci_remote_node_table_clear_group_index'
drivers/scsi/isci/remote_node_table.c:262: warning: Function parameter or member 'group_index' not described in 'sci_remote_node_table_set_group'
drivers/scsi/isci/remote_node_table.c:383: warning: Function parameter or member 'group_table_index' not described in 'sci_remote_node_table_allocate_single_remote_node'
drivers/scsi/isci/remote_node_table.c:383: warning: Excess function parameter 'table_index' description in 'sci_remote_node_table_allocate_single_remote_node'
drivers/scsi/isci/remote_node_table.c:516: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_single_remote_node'
drivers/scsi/isci/remote_node_table.c:562: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_triple_remote_node'
drivers/scsi/isci/remote_node_table.c:588: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_remote_node_index'
Link: https://lore.kernel.org/r/20210317091230.2912389-31-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/isci/remote_node_context.c:206: warning: Function parameter or member 'rnc' not described in 'sci_remote_node_context_notify_user'
drivers/scsi/isci/remote_node_context.c:206: warning: expecting prototype for This method just calls the user callback function and then resets the(). Prototype was for sci_remote_node_context_notify_user() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-30-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:22 +0000 (09:12 +0000)]
scsi: isci: port: Fix a bunch of kernel-doc issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port.c:130: warning: Function parameter or member 'iport' not described in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Function parameter or member 'prop' not described in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Excess function parameter 'port' description in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Excess function parameter 'properties' description in 'sci_port_get_properties'
drivers/scsi/isci/port.c:243: warning: Function parameter or member 'isci_phy' not described in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Function parameter or member 'isci_port' not described in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Excess function parameter 'phy' description in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Excess function parameter 'port' description in 'isci_port_link_down'
drivers/scsi/isci/port.c:318: warning: Function parameter or member 'isci_port' not described in 'isci_port_hard_reset_complete'
drivers/scsi/isci/port.c:318: warning: Excess function parameter 'port' description in 'isci_port_hard_reset_complete'
drivers/scsi/isci/port.c:398: warning: Cannot understand *
drivers/scsi/isci/port.c:544: warning: Function parameter or member 'iport' not described in 'sci_port_construct_dummy_rnc'
drivers/scsi/isci/port.c:544: warning: Excess function parameter 'sci_port' description in 'sci_port_construct_dummy_rnc'
drivers/scsi/isci/port.c:692: warning: Function parameter or member 'iport' not described in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Function parameter or member 'iphy' not described in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Excess function parameter 'sci_port' description in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Excess function parameter 'sci_phy' description in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:719: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/port.c:756: warning: Function parameter or member 'iport' not described in 'sci_port_link_detected'
drivers/scsi/isci/port.c:756: warning: Function parameter or member 'iphy' not described in 'sci_port_link_detected'
drivers/scsi/isci/port.c:756: warning: expecting prototype for if the(). Prototype was for sci_port_link_detected() instead
drivers/scsi/isci/port.c:821: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/port.c:885: warning: Function parameter or member 'iport' not described in 'sci_port_post_dummy_request'
drivers/scsi/isci/port.c:885: warning: Excess function parameter 'sci_port' description in 'sci_port_post_dummy_request'
drivers/scsi/isci/port.c:909: warning: Function parameter or member 'iport' not described in 'sci_port_abort_dummy_request'
drivers/scsi/isci/port.c:909: warning: expecting prototype for This will alow the hardware to(). Prototype was for sci_port_abort_dummy_request() instead
drivers/scsi/isci/port.c:926: warning: Cannot understand *
drivers/scsi/isci/port.c:1017: warning: Cannot understand *
drivers/scsi/isci/port.c:1199: warning: Function parameter or member 'iport' not described in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Function parameter or member 'iphy' not described in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Excess function parameter 'sci_port' description in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Excess function parameter 'sci_phy' description in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1270: warning: Function parameter or member 'iport' not described in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Function parameter or member 'iphy' not described in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Excess function parameter 'sci_port' description in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Excess function parameter 'sci_phy' description in 'sci_port_remove_phy'
[mkp: fixed typo alow->allow]
Link: https://lore.kernel.org/r/20210317091230.2912389-29-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:21 +0000 (09:12 +0000)]
scsi: isci: request: Fix doc-rot issue relating to 'ireq' param
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:496: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:496: warning: Excess function parameter 'sci_req' description in 'scu_sata_request_construct_task_context'
Link: https://lore.kernel.org/r/20210317091230.2912389-28-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:20 +0000 (09:12 +0000)]
scsi: isci: remote_device: Fix a bunch of doc-rot issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'idev' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'reason' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Excess function parameter 'isci_host' description in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Excess function parameter 'isci_device' description in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:1015: warning: Function parameter or member 'idev' not described in 'sci_remote_device_destruct'
drivers/scsi/isci/remote_device.c:1015: warning: Excess function parameter 'remote_device' description in 'sci_remote_device_destruct'
drivers/scsi/isci/remote_device.c:1249: warning: Function parameter or member 'iport' not described in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Function parameter or member 'idev' not described in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Excess function parameter 'sci_port' description in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Excess function parameter 'sci_dev' description in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1275: warning: Function parameter or member 'iport' not described in 'sci_remote_device_da_construct'
drivers/scsi/isci/remote_device.c:1275: warning: Function parameter or member 'idev' not described in 'sci_remote_device_da_construct'
drivers/scsi/isci/remote_device.c:1311: warning: Function parameter or member 'iport' not described in 'sci_remote_device_ea_construct'
drivers/scsi/isci/remote_device.c:1311: warning: Function parameter or member 'idev' not described in 'sci_remote_device_ea_construct'
drivers/scsi/isci/remote_device.c:1453: warning: Function parameter or member 'idev' not described in 'sci_remote_device_start'
drivers/scsi/isci/remote_device.c:1453: warning: Excess function parameter 'remote_device' description in 'sci_remote_device_start'
drivers/scsi/isci/remote_device.c:1513: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_alloc'
drivers/scsi/isci/remote_device.c:1513: warning: Function parameter or member 'iport' not described in 'isci_remote_device_alloc'
drivers/scsi/isci/remote_device.c:1513: warning: expecting prototype for This function builds the isci_remote_device when a libsas dev_found message(). Prototype was for isci_remote_device_alloc() instead
drivers/scsi/isci/remote_device.c:1558: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Function parameter or member 'idev' not described in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Excess function parameter 'isci_host' description in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Excess function parameter 'isci_device' description in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1592: warning: Function parameter or member 'dev' not described in 'isci_remote_device_gone'
drivers/scsi/isci/remote_device.c:1592: warning: Excess function parameter 'domain_device' description in 'isci_remote_device_gone'
drivers/scsi/isci/remote_device.c:1614: warning: Function parameter or member 'dev' not described in 'isci_remote_device_found'
drivers/scsi/isci/remote_device.c:1614: warning: Excess function parameter 'domain_device' description in 'isci_remote_device_found'
Link: https://lore.kernel.org/r/20210317091230.2912389-27-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:19 +0000 (09:12 +0000)]
scsi: isci: port_config: Fix a bunch of doc-rot and demote abuses
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port_config.c:76: warning: Cannot understand *
drivers/scsi/isci/port_config.c:105: warning: Cannot understand *
drivers/scsi/isci/port_config.c:148: warning: Cannot understand *
drivers/scsi/isci/port_config.c:376: warning: Cannot understand *
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'ihost' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'port_agent' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'iport' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'iphy' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'scic' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'sci_port' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'sci_phy' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:623: warning: Cannot understand *
drivers/scsi/isci/port_config.c:701: warning: Cannot understand *
Link: https://lore.kernel.org/r/20210317091230.2912389-26-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210317091230.2912389-25-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:17 +0000 (09:12 +0000)]
scsi: isci: remote_node_table: Fix a bunch of kernel-doc misdemeanours
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_node_table.c:66: warning: Incorrect use of kernel-doc format: *
drivers/scsi/isci/remote_node_table.c:80: warning: Function parameter or member 'remote_node_table' not described in 'sci_remote_node_table_get_group_index'
drivers/scsi/isci/remote_node_table.c:80: warning: Function parameter or member 'group_table_index' not described in 'sci_remote_node_table_get_group_index'
drivers/scsi/isci/remote_node_table.c:80: warning: expecting prototype for This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE(). Prototype was for sci_remote_node_table_get_group_index() instead
drivers/scsi/isci/remote_node_table.c:101: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:131: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:161: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:194: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:227: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:256: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:283: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:310: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:368: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:428: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:465: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:508: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:553: warning: Cannot understand *
drivers/scsi/isci/remote_node_table.c:576: warning: Cannot understand *
Link: https://lore.kernel.org/r/20210317091230.2912389-24-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:16 +0000 (09:12 +0000)]
scsi: isci: task: Demote non-conformant header and remove superfluous param
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_host' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_device' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:677: warning: Excess function parameter 'lun' description in 'isci_task_query_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-23-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:15 +0000 (09:12 +0000)]
scsi: isci: host: Fix bunch of kernel-doc related issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/host.c:93: warning: Cannot understand *
drivers/scsi/isci/host.c:108: warning: Function parameter or member 'x' not described in 'NORMALIZE_PUT_POINTER'
drivers/scsi/isci/host.c:121: warning: Function parameter or member 'x' not described in 'NORMALIZE_EVENT_POINTER'
drivers/scsi/isci/host.c:130: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER'
drivers/scsi/isci/host.c:139: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER_CYCLE_BIT'
drivers/scsi/isci/host.c:146: warning: Function parameter or member 'x' not described in 'COMPLETION_QUEUE_CYCLE_BIT'
drivers/scsi/isci/host.c:646: warning: Function parameter or member 'ihost' not described in 'isci_host_start_complete'
drivers/scsi/isci/host.c:646: warning: Excess function parameter 'isci_host' description in 'isci_host_start_complete'
drivers/scsi/isci/host.c:680: warning: Function parameter or member 'ihost' not described in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:680: warning: Excess function parameter 'controller' description in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:903: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:903: warning: Excess function parameter 'scic' description in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:1159: warning: Function parameter or member 'ihost' not described in 'sci_controller_stop'
drivers/scsi/isci/host.c:1159: warning: Excess function parameter 'controller' description in 'sci_controller_stop'
drivers/scsi/isci/host.c:1184: warning: Function parameter or member 'ihost' not described in 'sci_controller_reset'
drivers/scsi/isci/host.c:1184: warning: Excess function parameter 'controller' description in 'sci_controller_reset'
drivers/scsi/isci/host.c:1352: warning: Function parameter or member 'ihost' not described in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:1352: warning: Excess function parameter 'controller' description in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'ihost' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'idev' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: expecting prototype for This method allocates remote node index and the reserves the remote node(). Prototype was for sci_controller_allocate_remote_node_context() instead
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'idev' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ireq' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'controller' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'remote_device' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'task_request' description in 'sci_controller_start_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-22-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:14 +0000 (09:12 +0000)]
scsi: isci: request: Fix a myriad of kernel-doc issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:211: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:414: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:472: warning: Function parameter or member 'ireq' not described in 'scu_ssp_task_request_construct_task_context'
drivers/scsi/isci/request.c:472: warning: expecting prototype for The(). Prototype was for scu_ssp_task_request_construct_task_context() instead
drivers/scsi/isci/request.c:501: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:501: warning: expecting prototype for This method is will fill in the SCU Task Context for any type of SATA(). Prototype was for scu_sata_request_construct_task_context() instead
drivers/scsi/isci/request.c:597: warning: Cannot understand *
drivers/scsi/isci/request.c:785: warning: expecting prototype for sci_req_tx_bytes(). Prototype was for SCU_TASK_CONTEXT_SRAM() instead
drivers/scsi/isci/request.c:1399: warning: Cannot understand *
drivers/scsi/isci/request.c:1446: warning: Cannot understand *
drivers/scsi/isci/request.c:2465: warning: Function parameter or member 'task' not described in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2465: warning: Excess function parameter 'sas_task' description in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2501: warning: Function parameter or member 'task' not described in 'isci_request_set_open_reject_status'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'idev' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'task' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:3337: warning: Function parameter or member 'idev' not described in 'isci_io_request_build'
drivers/scsi/isci/request.c:3337: warning: Excess function parameter 'sci_device' description in 'isci_io_request_build'
[mkp: fix typo reported by checkpatch]
Link: https://lore.kernel.org/r/20210317091230.2912389-21-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:13 +0000 (09:12 +0000)]
scsi: isci: phy: Provide function name and demote non-conforming header
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iphy' not described in 'sci_phy_set_port'
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iport' not described in 'sci_phy_set_port'
Link: https://lore.kernel.org/r/20210317091230.2912389-20-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:10 +0000 (09:12 +0000)]
scsi: isci: phy: Fix a few different kernel-doc related issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:364: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:401: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:611: warning: Function parameter or member 'iphy' not described in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:611: warning: Excess function parameter 'sci_phy' description in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:1170: warning: Cannot understand *
drivers/scsi/isci/phy.c:1222: warning: Cannot understand *
drivers/scsi/isci/phy.c:1432: warning: Function parameter or member 'sas_phy' not described in 'isci_phy_control'
drivers/scsi/isci/phy.c:1432: warning: Excess function parameter 'phy' description in 'isci_phy_control'
Link: https://lore.kernel.org/r/20210317091230.2912389-17-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:12 +0000 (09:12 +0000)]
scsi: fnic: Kernel-doc headers must contain the function name
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fnic/fnic_fcs.c:308: warning: expecting prototype for Check if the Received FIP FLOGI frame is rejected(). Prototype was for is_fnic_fip_flogi_reject() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-19-lee.jones@linaro.org Cc: Satish Kharat <satishkh@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'fnic' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'st_flags' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:183: warning: Function parameter or member 'clearbits' not described in '__fnic_set_state_flags'
drivers/scsi/fnic/fnic_scsi.c:2296: warning: Function parameter or member 'fnic' not described in 'fnic_scsi_host_start_tag'
drivers/scsi/fnic/fnic_scsi.c:2296: warning: Function parameter or member 'sc' not described in 'fnic_scsi_host_start_tag'
drivers/scsi/fnic/fnic_scsi.c:2316: warning: Function parameter or member 'fnic' not described in 'fnic_scsi_host_end_tag'
drivers/scsi/fnic/fnic_scsi.c:2316: warning: Function parameter or member 'sc' not described in 'fnic_scsi_host_end_tag'
Link: https://lore.kernel.org/r/20210317091230.2912389-18-lee.jones@linaro.org Cc: Satish Kharat <satishkh@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'data' not described in 'beiscsi_show_boot_tgt_info'
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'type' not described in 'beiscsi_show_boot_tgt_info'
drivers/scsi/be2iscsi/be_main.c:4937: warning: Function parameter or member 'buf' not described in 'beiscsi_show_boot_tgt_info'
Link: https://lore.kernel.org/r/20210317091230.2912389-16-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-drivers@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:08 +0000 (09:12 +0000)]
scsi: mpt3sas: Fix a few kernel-doc issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:06 +0000 (09:12 +0000)]
scsi: myrs: Add missing ':' to make the kernel-doc checker happy
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrs.c:1965: warning: Function parameter or member 'dev' not described in 'myrs_is_raid'
drivers/scsi/myrs.c:1978: warning: Function parameter or member 'dev' not described in 'myrs_get_resync'
drivers/scsi/myrs.c:2002: warning: Function parameter or member 'dev' not described in 'myrs_get_state'
Link: https://lore.kernel.org/r/20210317091230.2912389-13-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:05 +0000 (09:12 +0000)]
scsi: a100u2w: Fix some misnaming and formatting issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/a100u2w.c:278: warning: expecting prototype for orc_exec_sb(). Prototype was for orc_exec_scb() instead
drivers/scsi/a100u2w.c:596: warning: Function parameter or member 'target' not described in 'orc_device_reset'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'host' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'scb' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:915: warning: expecting prototype for inia100_queue(). Prototype was for inia100_queue_lck() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-12-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:04 +0000 (09:12 +0000)]
scsi: initio: Fix a few kernel-doc misdemeanours
Fixes the following W=1 kernel build warning(s):
drivers/scsi/initio.c:560: warning: Excess function parameter 'num_scbs' description in 'initio_init'
drivers/scsi/initio.c:1899: warning: expecting prototype for int_initio_scsi_resel(). Prototype was for int_initio_resel() instead
drivers/scsi/initio.c:2615: warning: expecting prototype for i91u_queuecommand(). Prototype was for i91u_queuecommand_lck() instead
drivers/scsi/initio.c:2667: warning: Function parameter or member 'dev' not described in 'i91u_biosparam'
drivers/scsi/initio.c:2667: warning: expecting prototype for i91u_biospararm(). Prototype was for i91u_biosparam() instead
drivers/scsi/initio.c:2740: warning: Function parameter or member 'host_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Function parameter or member 'cblk_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'host' description in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'cmnd' description in 'i91uSCBPost'
Link: https://lore.kernel.org/r/20210317091230.2912389-11-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bas Vermeulen <bvermeul@blackstar.xs4all.nl> Cc: Christoph Hellwig <hch@lst.de> Cc: Brian Macy <bmacy@sunshinecomputing.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:03 +0000 (09:12 +0000)]
scsi: dc395x: Fix some function param descriptions
Fixes the following W=1 kernel build warning(s):
drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'acb' not described in 'adapter_init'
drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'io_port_len' not described in 'adapter_init'
drivers/scsi/dc395x.c:4353: warning: Excess function parameter 'host' description in 'adapter_init'
Link: https://lore.kernel.org/r/20210317091230.2912389-10-lee.jones@linaro.org Cc: Oliver Neukum <oliver@neukum.org> Cc: Ali Akcaagac <aliakc@web.de> Cc: Jamie Lenehan <lenehan@twibble.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "C.L. Huang" <ching@tekram.com.tw> Cc: Erich Chen <erich@tekram.com.tw> Cc: Kurt Garloff <garloff@suse.de> Cc: dc395x@twibble.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:02 +0000 (09:12 +0000)]
scsi: be2iscsi: Ensure function follows directly after its header
Fixes the following W=1 kernel build warning(s):
drivers/scsi/be2iscsi/be_main.c:4935: warning: expecting prototype for beiscsi_show_boot_tgt_info(). Prototype was for BEISCSI_SYSFS_ISCSI_BOOT_FLAGS() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-9-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-drivers@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:12:01 +0000 (09:12 +0000)]
scsi: aic94xx: Correct misspelling of function asd_dump_seq_state()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic94xx/aic94xx_dump.c:729: warning: expecting prototype for ads_dump_seq_state(). Prototype was for asd_dump_seq_state() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-8-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: David Chaw <david_chaw@adaptec.com> Cc: Luben Tuikov <luben_tuikov@adaptec.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:59 +0000 (09:11 +0000)]
scsi: pmcraid: Fix a whole host of kernel-doc issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pmcraid.c:455: warning: Function parameter or member 'intrs' not described in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:455: warning: Excess function parameter 'intr' description in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:543: warning: Function parameter or member '' not described in 'pmcraid_ioa_reset'
drivers/scsi/pmcraid.c:543: warning: expecting prototype for pmcraid_bist_done(). Prototype was for pmcraid_ioa_reset() instead
drivers/scsi/pmcraid.c:603: warning: Function parameter or member 't' not described in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:603: warning: Excess function parameter 'cmd' description in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member '' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member 'u32' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: expecting prototype for pmcraid_reset_alert(). Prototype was for pmcraid_notify_ioastate() instead
drivers/scsi/pmcraid.c:687: warning: Function parameter or member 't' not described in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:687: warning: Excess function parameter 'cmd' description in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:858: warning: expecting prototype for pmcraid_fire_command(). Prototype was for _pmcraid_fire_command() instead
drivers/scsi/pmcraid.c:972: warning: Function parameter or member '' not described in 'pmcraid_querycfg'
drivers/scsi/pmcraid.c:972: warning: expecting prototype for pmcraid_get_fwversion_done(). Prototype was for pmcraid_querycfg() instead
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'aen_msg' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'data_size' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Excess function parameter 'type' description in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1781: warning: Function parameter or member '' not described in 'pmcraid_initiate_reset'
drivers/scsi/pmcraid.c:1781: warning: expecting prototype for pmcraid_process_ldn(). Prototype was for pmcraid_initiate_reset() instead
drivers/scsi/pmcraid.c:1887: warning: Function parameter or member '' not described in 'pmcraid_reinit_buffers'
drivers/scsi/pmcraid.c:1887: warning: expecting prototype for pmcraid_reset_enable_ioa(). Prototype was for pmcraid_reinit_buffers() instead
drivers/scsi/pmcraid.c:2704: warning: Function parameter or member 'timeout' not described in 'pmcraid_reset_device'
drivers/scsi/pmcraid.c:3025: warning: expecting prototype for pmcraid_eh_xxxx_reset_handler(). Prototype was for pmcraid_eh_device_reset_handler() instead
drivers/scsi/pmcraid.c:3327: warning: expecting prototype for pmcraid_queuecommand(). Prototype was for pmcraid_queuecommand_lck() instead
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'inode' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: expecting prototype for pmcraid_open(). Prototype was for pmcraid_chr_open() instead
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'fd' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'mode' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: expecting prototype for pmcraid_fasync(). Prototype was for pmcraid_chr_fasync() instead
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'ioctl_cmd' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'buflen' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Excess function parameter 'cmd' description in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'cmd' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'arg' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: expecting prototype for pmcraid_ioctl(). Prototype was for pmcraid_chr_ioctl() instead
drivers/scsi/pmcraid.c:3969: warning: cannot understand function prototype: 'const struct file_operations pmcraid_fops = '
drivers/scsi/pmcraid.c:3993: warning: Function parameter or member 'attr' not described in 'pmcraid_show_log_level'
drivers/scsi/pmcraid.c:4015: warning: Function parameter or member 'attr' not described in 'pmcraid_store_log_level'
drivers/scsi/pmcraid.c:4055: warning: Function parameter or member 'attr' not described in 'pmcraid_show_drv_version'
drivers/scsi/pmcraid.c:4081: warning: Function parameter or member 'attr' not described in 'pmcraid_show_adapter_id'
drivers/scsi/pmcraid.c:4081: warning: expecting prototype for pmcraid_show_io_adapter_id(). Prototype was for pmcraid_show_adapter_id() instead
drivers/scsi/pmcraid.c:4600: warning: Function parameter or member 'pinstance' not described in 'pmcraid_allocate_cmd_blocks'
drivers/scsi/pmcraid.c:5153: warning: Function parameter or member 'minor' not described in 'pmcraid_release_minor'
Link: https://lore.kernel.org/r/20210317091230.2912389-6-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:58 +0000 (09:11 +0000)]
scsi: sd_zbc: Place function name into header
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sd_zbc.c:137: warning: wrong kernel-doc identifier on line:
Link: https://lore.kernel.org/r/20210317091230.2912389-5-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Le Moal <damien.lemoal@hgst.com> Cc: Shaun Tancheff <shaun.tancheff@seagate.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:57 +0000 (09:11 +0000)]
scsi: mvumi: Fix formatting and doc-rot issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mvumi.c:191: warning: Function parameter or member 'sg_count' not described in 'mvumi_make_sgl'
drivers/scsi/mvumi.c:1301: warning: Function parameter or member 'ob_frame' not described in 'mvumi_complete_cmd'
drivers/scsi/mvumi.c:2084: warning: Function parameter or member 'shost' not described in 'mvumi_queue_command'
drivers/scsi/mvumi.c:2084: warning: Excess function parameter 'done' description in 'mvumi_queue_command'
Link: https://lore.kernel.org/r/20210317091230.2912389-4-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Marvell <jyli@marvell.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:56 +0000 (09:11 +0000)]
scsi: ipr: Fix incorrect function names in their headers
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ipr.c:5335: warning: expecting prototype for ipr_eh_dev_reset(). Prototype was for __ipr_eh_dev_reset() instead
drivers/scsi/ipr.c:5594: warning: expecting prototype for ipr_eh_abort(). Prototype was for ipr_scan_finished() instead
drivers/scsi/ipr.c:5616: warning: expecting prototype for ipr_eh_host_reset(). Prototype was for ipr_eh_abort() instead
drivers/scsi/ipr.c:6725: warning: expecting prototype for ipr_info(). Prototype was for ipr_ioa_info() instead
[mkp: tweaked ipr_scan_finished() comment]
Link: https://lore.kernel.org/r/20210317091230.2912389-3-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:55 +0000 (09:11 +0000)]
scsi: myrb: Demote non-conformant kernel-doc headers and fix others
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrb.c:91: warning: Function parameter or member 'pdev' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:91: warning: Function parameter or member 'cb' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:141: warning: Function parameter or member 'cb' not described in 'myrb_destroy_mempools'
drivers/scsi/myrb.c:153: warning: Function parameter or member 'cmd_blk' not described in 'myrb_reset_cmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cb' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cmd_blk' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cb' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cmd_blk' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'op' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'addr' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'op' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'sdev' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'pdev_info' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:341: warning: Function parameter or member 'cb' not described in 'myrb_get_errtable'
drivers/scsi/myrb.c:388: warning: Function parameter or member 'cb' not described in 'myrb_get_ldev_info'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'cb' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'rbld' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:472: warning: Function parameter or member 'cb' not described in 'myrb_update_rbld_progress'
drivers/scsi/myrb.c:533: warning: Function parameter or member 'cb' not described in 'myrb_get_cc_progress'
drivers/scsi/myrb.c:580: warning: Function parameter or member 'cb' not described in 'myrb_bgi_control'
drivers/scsi/myrb.c:671: warning: Function parameter or member 'cb' not described in 'myrb_hba_enquiry'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'cb' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'sdev' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'state' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'cb' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'mmio_init_fn' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:913: warning: Function parameter or member 'cb' not described in 'myrb_get_hba_config'
drivers/scsi/myrb.c:1200: warning: Function parameter or member 'cb' not described in 'myrb_unmap'
drivers/scsi/myrb.c:1236: warning: Function parameter or member 'cb' not described in 'myrb_cleanup'
drivers/scsi/myrb.c:2249: warning: Function parameter or member 'dev' not described in 'myrb_is_raid'
drivers/scsi/myrb.c:2260: warning: Function parameter or member 'dev' not described in 'myrb_get_resync'
drivers/scsi/myrb.c:2287: warning: Function parameter or member 'dev' not described in 'myrb_get_state'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'cb' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'error' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm0' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm1' not described in 'myrb_err_status'
Link: https://lore.kernel.org/r/20210317091230.2912389-2-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:25 +0000 (09:11 +0000)]
scsi: nsp32: Correct expected types in debug print formatting
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_setup_sg_table’:
drivers/scsi/nsp32.c:879:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘unsigned int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:879:52: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_detect’:
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:22: note: format string is defined here
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:28: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_suspend’:
drivers/scsi/nsp32.c:3267:23: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘pm_message_t’ {aka ‘struct pm_message’} [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:3267:56: note: format string is defined here
Link: https://lore.kernel.org/r/20210317091125.2910058-9-lee.jones@linaro.org Cc: GOTO Masanori <gotom@debian.or.jp> Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: gotom@debian.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:24 +0000 (09:11 +0000)]
scsi: isci: Make local function port_state_name() static
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port.c:65:13: warning: no previous prototype for ‘port_state_name’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-8-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:23 +0000 (09:11 +0000)]
scsi: isci: Make local function isci_remote_device_wait_for_resume_from_abort() static
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_device.c:1387:6: warning: no previous prototype for ‘isci_remote_device_wait_for_resume_from_abort’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-7-lee.jones@linaro.org Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:22 +0000 (09:11 +0000)]
scsi: sim710: Remove unused variable 'err' from sim710_init()
Take the opportunity to rework the comment a little.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sim710.c: In function ‘sim710_init’:
drivers/scsi/sim710.c:216:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-6-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Richard Hirst <richard@sleepie.demon.co.uk> Cc: c by <James.Bottomley@SteelEye.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:21 +0000 (09:11 +0000)]
scsi: FlashPoint: Remove unused variable 'TID' from FlashPoint_AbortCCB()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/FlashPoint.c: In function ‘FlashPoint_AbortCCB’:
drivers/scsi/FlashPoint.c:1618:16: warning: variable ‘TID’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-5-lee.jones@linaro.org Cc: Khalid Aziz <khalid@gonehiking.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Khalid Aziz <khalid@gonehiking.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:20 +0000 (09:11 +0000)]
scsi: nsp32: Remove or exclude unused variables
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_selection_autoscsi’:
drivers/scsi/nsp32.c:584:17: warning: variable ‘execph’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_msgout_occur’:
drivers/scsi/nsp32.c:1785:7: warning: variable ‘new_sgtp’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_analyze_sdtr’:
drivers/scsi/nsp32.c:2227:20: warning: variable ‘syncnum’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c:2223:20: warning: variable ‘synct’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_do_bus_reset’:
drivers/scsi/nsp32.c:2841:17: warning: variable ‘intrdat’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_getprom_param’:
drivers/scsi/nsp32.c:2912:11: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210317091125.2910058-4-lee.jones@linaro.org Cc: GOTO Masanori <gotom@debian.or.jp> Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: gotom@debian.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:19 +0000 (09:11 +0000)]
scsi: nsp32: Supply __printf(x, y) formatting for nsp32_message()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/nsp32.c: In function ‘nsp32_message’:
drivers/scsi/nsp32.c:318:2: warning: function ‘nsp32_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Link: https://lore.kernel.org/r/20210317091125.2910058-3-lee.jones@linaro.org Cc: GOTO Masanori <gotom@debian.or.jp> Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: gotom@debian.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Wed, 17 Mar 2021 09:11:18 +0000 (09:11 +0000)]
scsi: BusLogic: Supply __printf(x, y) formatting for blogic_msg()
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/BusLogic.c:51:
drivers/scsi/BusLogic.c: In function ‘blogic_msg’:
drivers/scsi/BusLogic.c:3591:2: warning: function ‘blogic_msg’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Link: https://lore.kernel.org/r/20210317091125.2910058-2-lee.jones@linaro.org Cc: Khalid Aziz <khalid@gonehiking.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Cc: linux-scsi@vger.kernel.org Acked-by: Khalid Aziz <khalid@gonehiking.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Wed, 17 Mar 2021 03:26:48 +0000 (20:26 -0700)]
scsi: sbitmap: Silence a debug kernel warning triggered by sbitmap_put()
All sbitmap code uses implied preemption protection to update
sb->alloc_hint except sbitmap_put(). Using implied preemption protection is
safe since the value of sb->alloc_hint only affects performance of sbitmap
allocations but not their correctness. Change this_cpu_ptr() in
sbitmap_put() into raw_cpu_ptr() to suppress the following kernel warning
that appears with preemption debugging enabled (CONFIG_DEBUG_PREEMPT):
BUG: using smp_processor_id() in preemptible [00000000] code: scsi_eh_0/152
caller is debug_smp_processor_id+0x17/0x20
CPU: 1 PID: 152 Comm: scsi_eh_0 Tainted: G W 5.12.0-rc1-dbg+ #6
Call Trace:
show_stack+0x52/0x58
dump_stack+0xaf/0xf3
check_preemption_disabled+0xce/0xd0
debug_smp_processor_id+0x17/0x20
scsi_device_unbusy+0x13a/0x1c0 [scsi_mod]
scsi_finish_command+0x4d/0x290 [scsi_mod]
scsi_eh_flush_done_q+0x1e7/0x280 [scsi_mod]
ata_scsi_port_error_handler+0x592/0x750 [libata]
ata_scsi_error+0x1a0/0x1f0 [libata]
scsi_error_handler+0x19e/0x330 [scsi_mod]
kthread+0x222/0x250
ret_from_fork+0x1f/0x30
Link: https://lore.kernel.org/r/20210317032648.9080-1-bvanassche@acm.org Fixes: c548e62bcf6a ("scsi: sbitmap: Move allocation hint into sbitmap") Cc: Hannes Reinecke <hare@suse.de> Cc: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yue Hu [Thu, 18 Mar 2021 09:55:36 +0000 (17:55 +0800)]
scsi: ufs: core: Tidy up WB configuration code
There are similar code implementations for WB configuration in
ufshcd_wb_{ctrl, toggle_flush_during_h8, toggle_flush}. Extract the common
parts to create a new helper with a flag parameter to reduce code
duplication.
Meanwhile, rename ufshcd_wb_ctrl() to ufshcd_wb_toggle() for better
readability. And remove unnecessary log messages from ufshcd_wb_config()
since relevant toggle function will emit messages. Also change
ufshcd_wb_toggle_flush{__during_h8} to void type accordingly.
scsi: mpt3sas: Replace unnecessary dynamic allocation with a static one
Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.
Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
projects / thirdparty / linux.git / log
