Iain Buclaw [Wed, 29 Jun 2022 19:52:39 +0000 (21:52 +0200)]
d: Fix error: aggregate value used where floating point was expected
Casting from vector to static array is permitted, and the frontend
generates a reinterpret cast, but casting back the other way resulted in
an error. This has been fixed to be properly handled in the code
generation pass of VectorExp, and the conversion for lvalue and rvalue
handling done in convert_expr and convert_for_rvalue respectively.
PR d/106139
gcc/d/ChangeLog:
* d-convert.cc (convert_expr): Handle casting from array to vector.
(convert_for_rvalue): Rewrite vector to array casts of the same
element type into a constructor.
(convert_for_assignment): Return calling convert_for_rvalue.
* dmd/expressionsem.c (ExpressionSemanticVisitor::visit): Run semantic
on vector expression after lowering.
* expr.cc (ExprVisitor::visit (VectorExp *)): Handle generating a
vector expression from a static array.
gcc/testsuite/ChangeLog:
* gdc.dg/pr106139a.d: New test.
* gdc.dg/pr106139b.d: New test.
* gdc.dg/pr106139c.d: New test.
* gdc.dg/pr106139d.d: New test.
* gdc.test/fail_compilation/ice20264.d: New test.
Harald Anlauf [Wed, 29 Jun 2022 19:36:17 +0000 (21:36 +0200)]
Fortran: error recovery on invalid CLASS(), PARAMETER declarations [PR105243]
gcc/fortran/ChangeLog:
PR fortran/103137
PR fortran/103138
PR fortran/103693
PR fortran/105243
* decl.c (gfc_match_data_decl): Reject CLASS entity declaration
when it is given the PARAMETER attribute.
Harald Anlauf [Tue, 28 Jun 2022 20:29:28 +0000 (22:29 +0200)]
Fortran: improve error recovery for EXTENDS_TYPE_OF() [PR106121]
gcc/fortran/ChangeLog:
PR fortran/106121
* simplify.c (gfc_simplify_extends_type_of): Do not attempt to
simplify when one of the arguments is a CLASS variable that was
not properly declared.
gcc/testsuite/ChangeLog:
PR fortran/106121
* gfortran.dg/extends_type_of_4.f90: New test.
Harald Anlauf [Tue, 21 Jun 2022 21:20:18 +0000 (23:20 +0200)]
Fortran: fix simplification of INDEX(str1,str2) [PR105691]
gcc/fortran/ChangeLog:
PR fortran/105691
* simplify.c (gfc_simplify_index): Replace old simplification
code by the equivalent of the runtime library implementation. Use
HOST_WIDE_INT instead of int for string index, length variables.
gcc/testsuite/ChangeLog:
PR fortran/105691
* gfortran.dg/index_6.f90: New test.
Harald Anlauf [Fri, 24 Jun 2022 20:21:39 +0000 (22:21 +0200)]
Fortran: fix checking of arguments to UNPACK when MASK is a variable [PR105813]
gcc/fortran/ChangeLog:
PR fortran/105813
* check.c (gfc_check_unpack): Try to simplify MASK argument to
UNPACK so that checking of the VECTOR argument can work when MASK
is a variable.
gcc/testsuite/ChangeLog:
PR fortran/105813
* gfortran.dg/unpack_vector_1.f90: New test.
Iain Buclaw [Wed, 22 Jun 2022 17:11:20 +0000 (19:11 +0200)]
tilegx: Fix infinite loop in gen-mul-tables generator
Since around GCC 10, the condition `j < (INTMAX_MAX / 10)' will get
optimized into `j != 922337203685477580', which will result in an
infinite loop for certain inputs of `j'.
Copy the condition already used by the -DTILEPRO generator code, which
doesn't fall into this trap.
gcc/ChangeLog:
* config/tilepro/gen-mul-tables.cc (tilegx_emit): Adjust loop
condition to avoid overflow.
Uros Bizjak [Fri, 17 Jun 2022 15:19:44 +0000 (17:19 +0200)]
alpha: Introduce target specific store_data_bypass_p function [PR105209]
This patch introduces alpha-specific version of store_data_bypass_p that
ignores TRAP_IF that would result in assertion failure (and internal
compiler error) in the generic store_data_bypass_p function.
While at it, also remove ev4_ist_c reservation, store_data_bypass_p
can handle the patterns with multiple sets since some time ago.
2022-06-17 Uroš Bizjak <ubizjak@gmail.com>
gcc/ChangeLog:
PR target/105209
* config/alpha/alpha-protos.h (alpha_store_data_bypass_p): New.
* config/alpha/alpha.c (alpha_store_data_bypass_p): New function.
(alpha_store_data_bypass_p_1): Ditto.
* config/alpha/ev4.md: Use alpha_store_data_bypass_p instead
of generic store_data_bypass_p.
(ev4_ist_c): Remove insn reservation.
gcc/testsuite/ChangeLog:
PR target/105209
* gcc.target/alpha/pr105209.c: New test.
rs6000: Do not use rs6000_cpu for .machine ppc and ppc64 (PR104829)
Fixes: 77eccbf39ed5
rs6000.h has
#define PROCESSOR_POWERPC PROCESSOR_PPC604
#define PROCESSOR_POWERPC64 PROCESSOR_RS64A
which means that if you use things like -mcpu=powerpc -mvsx it will no
longer work after my latest .machine patch. This causes GCC build errors
in some cases, not a good idea (even if the errors are actually
pre-existing: using -mvsx with a machine that does not have VSX cannot
work properly).
This adds more correct .machine for most older CPUs. It should be
conservative in the sense that everything we handled before we handle at
least as well now. This does not yet revamp the server CPU handling, it
is too risky at this point in time.
Tested on powerpc64-linux {-m32,-m64}. Also manually tested with all
-mcpu=, and the output of that passed through the GNU assembler.
Jakub Jelinek [Sat, 18 Jun 2022 09:07:13 +0000 (11:07 +0200)]
varasm: Fix up ICE in narrowing_initializer_constant_valid_p [PR105998]
The following testcase ICEs because there is NON_LVALUE_EXPR (location
wrapper) around a VAR_DECL and has TYPE_MODE V2SImode and
SCALAR_INT_TYPE_MODE on that ICEs. Or for -m32 -march=i386 TYPE_MODE
is DImode, but SCALAR_INT_TYPE_MODE still uses the raw V2SImode and ICEs
too.
2022-06-18 Jakub Jelinek <jakub@redhat.com>
PR middle-end/105998
* varasm.c (narrowing_initializer_constant_valid_p): Check
SCALAR_INT_MODE_P instead of INTEGRAL_MODE_P, also break on
! INTEGRAL_TYPE_P and do the same check also on op{0,1}'s type.
Jakub Jelinek [Fri, 27 May 2022 09:40:42 +0000 (11:40 +0200)]
fold-const: Fix up -fsanitize=null in C++ [PR105729]
The following testcase triggers a false positive UBSan binding a reference
to null diagnostics.
In the FE we instrument conversions from pointer to reference type
to diagnose at runtime if the operand of such a conversion is 0.
The problem is that a GENERIC folding folds
((const struct Bar *) ((const struct Foo *) this)->data) + (sizetype) range_check (x)
conversion to const struct Bar & by converting to that the first
operand of the POINTER_PLUS_EXPR. But that changes when the -fsanitize=null
binding to reference runtime check occurs. Without the optimization,
it is invoked on the result of the POINTER_PLUS_EXPR, and as range_check
call throws, that means it never triggers in the testcase.
With the optimization, it checks whether this->data is NULL and it is.
The following patch avoids that optimization during GENERIC folding when
-fsanitize=null is enabled and it is a cast from non-REFERENCE_TYPE to
REFERENCE_TYPE.
2022-05-27 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/105729
* fold-const.c (fold_unary_loc): Don't optimize (X &) ((Y *) z + w)
to (X &) z + w if -fsanitize=null during GENERIC folding.
Richard Earnshaw [Wed, 15 Jun 2022 15:07:20 +0000 (16:07 +0100)]
arm: big-endian issue in gen_cpymem_ldrd_strd [PR105981]
The code in gen_cpymem_ldrd_strd has been incorrect for big-endian
since r230663. The problem is that we use gen_lowpart, etc. to split
the 64-bit quantity, but fail to account for the fact that these
routines are really dealing with 64-bit /values/ and in big-endian the
ordering of the sub-registers changes.
To fix this, I've renamed the conceptually misnamed low_reg and hi_reg
as first_reg and second_reg, and then used different logic for
big-endian targets to initialize these values. This makes the logic
clearer than trying to think about high bits and low bits.
gcc/ChangeLog:
PR target/105981
* config/arm/arm.c (gen_cpymem_ldrd_strd): Rename low_reg and hi_reg
to first_reg and second_reg respectively. Initialize them correctly
when generating big-endian code.
Simon Wright [Sun, 12 Jun 2022 16:01:22 +0000 (17:01 +0100)]
Darwin: Truncate kernel-provided version to OS major for Darwin >= 20.
In common with system tools, GCC uses a version obtained from the kernel as
the prevailing macOS target, when that is not overridden by command line or
environment versions (i.e. mmacosx-version-min=, MACOSX_DEPLOYMENT_TARGET).
Presently, GCC assumes that if the OS version is >= 20, the value used should
include both major and minium version identifiers. However the system tools
(for those versions) truncate the value to the major version - this leads to
link errors when combining objects built with clang and GCC for example:
ld: warning: object file (null.o) was built for newer macOS version (12.2)
than being linked (12.0)
The change here truncates the values GCC uses to the major version.
gcc/ChangeLog:
PR target/104871
* config/darwin-driver.c (darwin_find_version_from_kernel): If the OS
version is darwin20 (macOS 11) or greater, truncate the version to the
major number.
Mark Mentovai [Fri, 10 Jun 2022 14:56:42 +0000 (15:56 +0100)]
Darwin: Future-proof -mmacosx-version-min
f18cbc1ee1f4 (2021-12-18) updated various parts of gcc to not impose a
Darwin or macOS version maximum of the current known release. Different
parts of gcc accept, variously, Darwin version numbers matching
darwin2*, and macOS major version numbers up to 99. The current released
version is Darwin 21 and macOS 12, with Darwin 22 and macOS 13 expected
for public release later this year. With one major OS release per year,
this strategy is expected to provide another 8 years of headroom.
However, f18cbc1ee1f4 missed config/darwin-c.c (now .cc), which
continued to impose a maximum of macOS 12 on the -mmacosx-version-min
compiler driver argument. This was last updated from 11 to 12 in 11b967577483 (2021-10-27), but kicking the can down the road one year at
a time is not a viable strategy, and is not in line with the more recent
technique from f18cbc1ee1f4.
Prior to 556ab5125912 (2020-11-06), config/darwin-c.c did not impose a
maximum that needed annual maintenance, as at that point, all macOS
releases had used a major version of 10. The stricter approach imposed
since then was valuable for a time until the particulars of the new
versioning scheme were established and understood, but now that they
are, it's prudent to restore a more permissive approach.
gcc/ChangeLog:
* config/darwin-c.c: Make -mmacosx-version-min more future-proof.
Jakub Jelinek [Sun, 29 May 2022 19:57:51 +0000 (21:57 +0200)]
libcpp: Ignore CPP_PADDING tokens in _cpp_parse_expr [PR105732]
The first part of the following testcase (m1-m3 macros and its use)
regressed with my PR89971 fix, but as the m1,m4-m5 and its use part shows,
the problem isn't new, we can emit a CPP_PADDING token to avoid it from
being adjacent to whatever comes after the __VA_OPT__ (in this case there
is nothing afterwards, true).
In most cases these CPP_PADDING tokens don't matter, all other
callers of cpp_get_token_with_location either ignore CPP_PADDING tokens
completely (e.g. c_lex_with_flags) or they just remember them and
take them into account when printing stuff whether there should be
added whitespace or not (scan_translation_unit + token_streamer::stream).
So, I think we should just ignore CPP_PADDING tokens the same way in
_cpp_parse_expr.
2022-05-27 Jakub Jelinek <jakub@redhat.com>
PR preprocessor/105732
* expr.c (_cpp_parse_expr): Handle CPP_PADDING by just another
token.
There's heuristic to detect ptr[1].a[...] out of bound accesses
reasoning that if ptr points to an array of aggregates a trailing
incomplete array has to have size zero. The following more
thoroughly constrains the cases this applies to avoid false
positive diagnostics.
2022-05-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/105726
* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
Constrain array-of-flexarray case more.
Jonathan Wakely [Mon, 13 Jun 2022 15:36:14 +0000 (16:36 +0100)]
libstdc++: Use type_identity_t for non-deducible std::atomic_xxx args
This is LWG 3220 which is about to become Tentatively Ready.
libstdc++-v3/ChangeLog:
* include/std/atomic (__atomic_val_t): Use __type_identity_t
instead of atomic<T>::value_type, as per LWG 3220.
* testsuite/29_atomics/atomic/lwg3220.cc: New test.
Mark Mentovai [Mon, 13 Jun 2022 15:40:19 +0000 (16:40 +0100)]
libstdc++: Rename __null_terminated to avoid collision with Apple SDK
The macOS 13 SDK (and equivalent-version iOS and other Apple OS SDKs)
contain this definition in <sys/cdefs.h>:
863 #define __null_terminated
This collides with the use of __null_terminated in libstdc++'s
experimental fs_path.h.
As libstdc++'s use of this token is entirely internal to fs_path.h, the
simplest workaround, renaming it, is most appropriate. Here, it's
renamed to __nul_terminated, referencing the NUL ('\0') value that is
used to terminate the strings in the context in which this tag structure
is used.
libstdc++-v3/ChangeLog:
* include/experimental/bits/fs_path.h (__detail::__null_terminated):
Rename to __nul_terminated to avoid colliding with a macro in
Apple's SDK.
Jonathan Wakely [Fri, 6 May 2022 13:31:06 +0000 (14:31 +0100)]
libstdc++: Fix test that fails on Solaris [PR104731]
On Solaris the dirent::d_name member is a single char, causing this test
to fail with warnings about buffer overflow. Change the test to use a
union with additional space for writing a string to the d_name member.
libstdc++-v3/ChangeLog:
PR libstdc++/104731
* testsuite/27_io/filesystem/iterators/error_reporting.cc:
Use a trailing char array as storage for dirent::d_name.
Jonathan Wakely [Tue, 1 Feb 2022 23:58:08 +0000 (23:58 +0000)]
libstdc++: Do not use dirent::d_type unconditionally
These new tests should not use the d_type member unless it's actually
present on the OS.
libstdc++-v3/ChangeLog:
* testsuite/27_io/filesystem/iterators/error_reporting.cc: Use
autoconf macro to check whether d_type is present.
* testsuite/experimental/filesystem/iterators/error_reporting.cc:
Likewise.
Jonathan Wakely [Mon, 31 Jan 2022 21:12:53 +0000 (21:12 +0000)]
libstdc++: Reset filesystem::recursive_directory_iterator on error
The standard requires directory iterators to become equal to the end
iterator value if they report an error. Some members functions of
filesystem::recursive_directory_iterator fail to do that.
libstdc++-v3/ChangeLog:
* src/c++17/fs_dir.cc (recursive_directory_iterator::increment):
Reset state to past-the-end iterator on error.
(fs::recursive_directory_iterator::pop(error_code&)): Likewise.
(fs::recursive_directory_iterator::pop()): Check _M_dirs before
it might get reset.
* src/filesystem/dir.cc (recursive_directory_iterator): Likewise,
for the TS implementation.
* testsuite/27_io/filesystem/iterators/error_reporting.cc: New test.
* testsuite/experimental/filesystem/iterators/error_reporting.cc: New test.
Jonathan Wakely [Tue, 14 Jun 2022 19:42:54 +0000 (20:42 +0100)]
libstdc++: Backport tests for associative container move constructors
libstdc++-v3/ChangeLog:
* testsuite/23_containers/map/allocator/move_cons.cc: New test.
* testsuite/23_containers/multimap/allocator/move_cons.cc: New test.
* testsuite/23_containers/multiset/allocator/move_cons.cc: New test.
* testsuite/23_containers/set/allocator/move_cons.cc: New test.
Jonathan Wakely [Tue, 30 Nov 2021 23:32:50 +0000 (23:32 +0000)]
libstdc++: Clear RB tree after moving elements [PR103501]
If the allocator-extended move constructor move-constructs each element
into the new container, the contents of the old container are left in
moved-from states. We cannot know if those states preserve the
container's ordering and uniqueness guarantees, so just erase all
moved-from elements.
libstdc++-v3/ChangeLog:
PR libstdc++/103501
* include/bits/stl_tree.h (_Rb_tree(_Rb_tree&&, false_type)):
Clear container if elements have been moved-from.
* testsuite/23_containers/multiset/allocator/103501.cc: New test.
* testsuite/23_containers/set/allocator/103501.cc: New test.
Jonathan Wakely [Thu, 28 Apr 2022 12:06:31 +0000 (13:06 +0100)]
libstdc++: Fix error reporting in filesystem::copy [PR99290]
The recursive calls to filesystem::copy should stop if any of them
reports an error.
libstdc++-v3/ChangeLog:
PR libstdc++/99290
* src/c++17/fs_ops.cc (fs::copy): Pass error_code to
directory_iterator constructor, and check on each iteration.
* src/filesystem/ops.cc (fs::copy): Likewise.
* testsuite/27_io/filesystem/operations/copy.cc: Check for
errors during recursion.
* testsuite/experimental/filesystem/operations/copy.cc:
Likewise.
Jonathan Wakely [Fri, 5 Nov 2021 11:25:27 +0000 (11:25 +0000)]
libstdc++: Add xfail to pretty printer tests that fail in C++20
For some reason the type printer for std::string doesn't work in C++20
mode, so std::basic_string<char, char_traits<char>, allocator<char> is
printed out in full rather than being shown as std::string. It's
probably related to the fact that the extern template declarations are
disabled for C++20, but I don't know why that affects GDB.
For now I'm just marking the relevant tests as XFAIL. That requires
adding support for target selectors to individual GDB directives such as
note-test and whatis-regexp-test.
libstdc++-v3/ChangeLog:
* testsuite/lib/gdb-test.exp: Add target selector support to the
dg-final directives.
* testsuite/libstdc++-prettyprinters/80276.cc: Add xfail for
C++20.
* testsuite/libstdc++-prettyprinters/libfundts.cc: Likewise.
* testsuite/libstdc++-prettyprinters/prettyprinters.exp: Tweak
comment.
Jakub Jelinek [Wed, 2 Mar 2022 10:04:35 +0000 (11:04 +0100)]
testsuite: Fix up pr104637 testcase [PR104637]
This testcase FAILs everywhere for 3 reasons:
1) the testcase can't work on ia32, where sizeof (long double) == 12
and as it is not a power of 2, we disallow creating vectors with such
elements, -mx32 and -m64 are fine
2) the testcase emits a lot of -Wdiv-by-zero warnings, I've just added
-Wno-div-by-zero to dg-options
3) my fault, when tweaking the testcase I've missed 33 initializers of
a 32 element vector which didn't change anything on the ICE, but is
still reported
This patch fixes all of it, tested with
RUNTESTFLAGS='--target_board=unix\{-m32,-m64\} i386.exp=pr104637.c'
both without the LRA fix where it ICEs and with it where it passes
everywhere.
2022-03-02 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/104637
* gcc.target/i386/pr104637.c: Don't run on ia32. Add -Wno-div-by-zero
to dg-options.
(foo): Remove extraneous initializer.
[PR104637] LRA: Split hard regs as many as possible on one subpass
LRA hard reg split subpass is a small subpass used as the last
resort for LRA when it can not assign a hard reg to a reload
pseudo by other ways (e.g. by spilling non-reload pseudos). For
simplicity the subpass works on one split base (as each split
changes pseudo live range info). In this case it results in
reaching maximal possible number of subpasses. The patch
implements as many non-overlapping hard reg splits
splits as possible on each subpass.
gcc/ChangeLog:
PR rtl-optimization/104637
* lra-assigns.c (lra_split_hard_reg_for): Split hard regs as many
as possible on one subpass.
Marek Polacek [Mon, 7 Mar 2022 21:15:46 +0000 (16:15 -0500)]
rtl: ICE with thread_local and inline asm [PR104777]
In r270550, Jakub fixed classify_insn to handle asm goto: if the asm can
jump to a label, the insn should be a JUMP_INSN.
However, as the following testcase shows, non-null ASM_OPERANDS_LABEL_VEC
doesn't guarantee that the rtx has any actual labels it can branch to.
Here, the rtvec has 0 elements because expand_asm_stmt created it:
This causes an ICE in update_br_prob_note: BRANCH_EDGE (bb) crashes
because there's no branch edge. I think we can fix this by checking
that there is at least one label the asm can jump to before wrapping
the ASM_OPERANDS in a JUMP_INSN.
PR rtl-optimization/104777
gcc/ChangeLog:
* rtl.c (classify_insn): For ASM_OPERANDS, return JUMP_INSN only if
ASM_OPERANDS_LABEL_VEC has at least one element.
The r11-9772-g6f8133689f4397 backport made two changes, but only one was
needed on the gcc-11 branch. The other should not have been backported,
and causes errors with clang. This removes the unwanted part.
libstdc++-v3/ChangeLog:
PR libstdc++/105915
* include/experimental/bits/fs_path.h (path::begin, path::end):
Remove noexcept from declarations.
Iain Sandoe [Thu, 19 Aug 2021 12:01:14 +0000 (13:01 +0100)]
Jit, testsuite: Amend expect processing to tolerate more platforms.
The current 'fixed_host_execute' implementation fails on Darwin
platforms for a number of reasons:
1/ If the sub-process spawn fails (e.g. because of missing or mal-
formed params); rather than reporting the fail output into the
match stream, as indicated by the expect manual, it terminates
the script.
- We fix this by (a) checking that the executable is valid as well
as existing (b) we put the spawn into a catch block and report
a failure.
2/ There is no recovery path at all for a buffer-full case (and we
do see buffer-full events with the default sizes).
- Added by the patch here, however it is not as sophisticated as
the methods used by dejagnu internally. Here we set the process
to be "nowait" and then close the connection - with the intent
that this will terminate the spawned process.
3/ The expect logic assumes that 'Totals:' is a valid indicator
for the end of the spawned process output. This is not true
even for the default dejagnu header (there are a number of
additional reporting lines after). In addition to this, there
are some tests that intentionally produce more output after
the totals report (and there are tests that do not use that
mechanism at all).
The effect is the we might arrive at the "wait" for the spawned
process to finish - but that process might not have completed
all its output. For Darwin, at least that causes a deadlock
between expect and the spawnee - the latter is doing a non-
cancellable write and the former is waiting for the latter to
terminate. For some reason this does not seem to affect Linux
perhaps the pty implementation allows the write(s) are able to
proceed even though there is no reader.
- This is fixed by modifying the loop termination condition to be
either EOF (which will be the 'correct' condition) or a timeout
which would represent an error either in the runtime or in the
parsing of the output. As added precautions, we only try to
wait if there is a correcly-spawned process, and we are also
specific about which process we are waiting for.
4/ Darwin appears to have a bug in either the tcl or termios
'cooking' code that ocassionally inserts an additional CR char
into the stream - thus '\n' => '\r\r\n' instead of '\r\n'. The
original program output is correct (it only contains a single
\n) - the additional character is being inserted somewhere in
the translations applied before the output reaches expect.
The logic of this expect implementation does not tolerate single
\r or \n characters (it will fail with a timeout or buffer-full
if that occurs).
- This is fixed by having a line-end match that is adjusted for
Darwin.
5/ The default buffer size does seem to be too small in some cases
noting that GCC uses 10000 as the match buffer size and the
default is 2000.
- Fixed by increasing the size to 8192.
6/ There is a somewhat arbitrary dumping of output where we match
^$prefix\tSOMETHING... and then process the something. This
essentially allows the match to start at any place in the buffer
following any collection of non-line-end chars.
- Fixed by amending the match for 'general' lines to accommodate
these cases, and reporting such lines to the log. At least this
should allow debugging of any cases where output that should be
recognized is being dropped.
* jit.dg/jit.exp (fixed_local_execute): Amend the match and
exit conditions to cater for more platforms.
* lib/target-supports.exp: Add support for checking that the
jit lib is usable on the target.
Iain Sandoe [Thu, 5 Aug 2021 09:07:03 +0000 (10:07 +0100)]
JIT, testsuite, Darwin: Initial testsuite fixes.
The testsuite setup for jit is not compatible with Darwin since it
assumes that all targets support --export-dynamic.
- this is fixed by adding '-rdynamic' conditionally upon target
support for that (-rdynamic will be converted to the appropriate
linker option).
There is also an assumption that a suitable version of dejagnu.h
is present in some default include search path that is usable from
the testsuite. This is not the case for Darwin (dejagnu.h is not
installed, and would not, in general, be found in any default include
search path if installed via one of the main 'distros'). Also the
upstream dejagnu.h has a definition of 'wait()' that clashes with a
libc routines and therefore causes fails in the testsuite.
- This patch imports the header from dejagnu-1.6.2 and
* renames it to 'jit-dejagnu.h'
* patches it to avoid unused variable warnings and the clash
with the libc definition of wait ()
* In accordance with the advice in the expect man page, ensures
that the final output of the 'totals' print is stable.
* docs/examples/tut04-toyvm/toyvm.c: Include jit-dejagnu.h.
* docs/examples/tut04-toyvm/toyvm.cc: Likewise.
* jit-dejagnu.h: New file, imported from dejagnu-1.6.2 and
patched for this application.
gcc/testsuite/ChangeLog:
* jit.dg/harness.h: Include jit-dejagnu.h.
* jit.dg/jit.exp: Use -rdynamic conditionally on target
support, instead of unconditional -Wl,--export-dynamic.
Iain Sandoe [Thu, 5 Aug 2021 08:55:19 +0000 (09:55 +0100)]
Darwin, jit: Fix build [PR100613].
The generic unix build is not completely suitable for Darwin
platforms:
* It is a convention to encode the library versioning in the
binary and to have only one level of symlink for the installed
files. This needs to be applied to the installation too.
* The library needs to be built with its correct install name
so that two-level library naming works.
* The extension for shared libraries should be .dylib
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
PR jit/100613 - libgccjit should produce dylib on macOS
Iain Sandoe [Thu, 26 Aug 2021 11:52:29 +0000 (12:52 +0100)]
configure: Avoid unnecessary constraints on executables for $build.
The executables for GCC's c-family compilers must be built with no-PIE
because they use PCH and the current model for this requires that the
exe is always lauched at the same address. Since the other language
compilers share code with the c-family this constraint is also applied
to them.
However, the executables that run on $build (generators, and parsers
for md and def files) need not have any such constraint they do not
consume PCH files.
This change simplifies the configuration and Makefile content by
removing the code enforcing no-PIE on these exes. This also fixes a
bootstrap issue with some Darwin versions and clang as the bootstrap
compiler, where -no-PIE causes the correct relocation model to be
switched off leading to invalid user-space code.
* Makefile.in: Remove variables related to applying no-PIE
to the exes on $build.
* configure: Regenerate.
* configure.ac: Remove configuration related to applying
no-PIE to the exes on $build.
Alan Modra [Fri, 23 Oct 2020 01:41:15 +0000 (12:11 +1030)]
[RS6000] altivec style lvx/stvx addresses vs power10
gcc.target/powerpc/fold-vec-st-pixel.c and other testcases fail on
power10, generating
addi 9,5,12
rldicr 9,9,0,59
stxv 34,0(9)
rather than
addi 5,5,12
stvx 2,0,5
for an altivec lvx/stvx style address.
The problem starts with fwprop creating
(insn 9 4 0 2 (set (mem:V8HI (and:DI (plus:DI (reg/v/f:DI 121 [ vpp ])
(const_int 12 [0xc]))
(const_int -16 [0xfffffffffffffff0])) [0 MEM <vector(8) short int> [(void *)_4 & -16B]+0 S16 A128])
(reg/v:V8HI 120 [ vp1 ])) "pixel.c":6:10 1237 {vsx_movv8hi_64bit}
which is finally thrown out as invalid by lra. lra of course does that
by reloading the entire address.
fwprop creates the invalid address due to rs6000_legitimate_address_p
trimming off the outer AND of altivec style addresses before applying
other predicates. address_is_prefixed then allows the inner address.
Now at the time the AND stripping was added (git commit 850e8d3d56d),
rs6000_legitimate_address looked a lot simpler. This patch allows
through just those addresses that were legitimate in those simpler
days.
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Limit
AND addressing to just lvx/stvx style addresses.
Patrick Palka [Fri, 16 Jul 2021 13:44:42 +0000 (09:44 -0400)]
libstdc++: invalid default init in _CachedPosition [PR101231]
The primary template for _CachedPosition is a dummy implementation for
non-forward ranges, the iterators for which generally can't be cached.
Because this implementation doesn't actually cache anything, _M_has_value
is defined to be false and so calls to _M_get (which are always guarded
by _M_has_value) are unreachable.
Still, to suppress a "control reaches end of non-void function" warning
I made _M_get return {}, but after P2325 input iterators are no longer
necessarily default constructible so this workaround now breaks valid
programs.
This patch fixes this by instead using __builtin_unreachable to squelch
the warning.
PR libstdc++/103904
PR libstdc++/101231
libstdc++-v3/ChangeLog:
* include/std/ranges (_CachedPosition::_M_get): For non-forward
ranges, just call __builtin_unreachable.
* testsuite/std/ranges/istream_view.cc (test05): New test.
Patrick Palka [Tue, 31 May 2022 18:38:11 +0000 (14:38 -0400)]
libstdc++: Implement P2325 changes to default-constructibility of views
NB: This backport of r12-1606 to the 10 branch deliberately omits parts
of P2325R3 so as to maximize backward compatibility with pre-P2325R3 code.
In particular, we don't remove the default ctors for back_insert_iterator,
front_insert_iterator, ostream_iterator, ref_view and basic_istream_view.
And in the 10 branch we we don't have __non_propagating_cache or the
partial specialization of __box, so the changes to them are omitted too.
Finally, we don't update __cpp_lib_ranges to 202106L because many
significant 202106 Ranges changes still aren't implemented in the 10
branch, e.g. P2281R1 and P2210R2.
===
This implements the wording changes of P2325R3 "Views should not be
required to be default constructible". Changes are relatively
straightforward, besides perhaps those to __box (which now stands
for copyable-box instead of semiregular-box) and __non_propagating_cache.
For __box, this patch implements the recommended practice to also avoid
std::optional when the boxed type is nothrow_move/copy_constructible.
For __non_propagating_cache, now that it's used by split_view::_M_current,
we need to add assignment from a value of the underlying type to the
subset of the std::optional API implemented for the cache (needed by
split_view::begin()). Hence the new __non_propagating_cache::operator=
overload.
In passing, this fixes the undesirable list-init in the constructors of
the partial specialization of __box as reported in PR100475 comment #7.
PR libstdc++/103904
libstdc++-v3/ChangeLog:
* include/bits/iterator_concepts.h (weakly_incrementable): Remove
default_initializable requirement.
* include/bits/stl_iterator.h (common_iterator): Constrain the
default ctor.
(counted_iterator): Likewise.
* include/std/ranges (ranges::view): Remove default_initializable
requirement.
(subrange): Constrain the default ctor.
(__detail::__box::operator=): Handle self-assignment.
(single_view): Constraint the default ctor.
(iota_view): Relax semiregular constraint to copyable.
Constrain the default ctor.
(iota_view::_Iterator): Constraint the default ctor.
(filter_view): Likewise.
(filter_view::_Iterator): Likewise.
(transform_view): Likewise.
(transform_view::_Iterator): Likewise.
(take_view): Likewise.
(take_view::_Iterator): Likewise.
(take_while_view): Likewise.
(take_while_view::_Iterator): Likewise.
(drop_while_view): Likewise.
(drop_while_view::_Iterator): Likewise.
(join_view): Likewise.
(split_view): Constrain the default ctor.
(common_view): Likewise.
(reverse_view): Likewise.
(elements_view): Likewise.
(elements_view::_Iterator): Likewise.
* include/std/span (enable_view<span<_ElementType, _Extent>>):
Define this partial specialization to true unconditionally.
* testsuite/std/ranges/p2325.cc: New test.
* testsuite/std/ranges/single_view.cc (test06): New test.
* testsuite/std/ranges/view.cc: Adjust now that view doesn't
require default_initializable.
When a method returns a type that the platform ABI says should be
returned in memory, and that is done by a hidden 'sret' parameter,
the message send calls must be adjusted to inform the runtime that
the sret parameter is present. As reported in the PR, this is not
working for non-aggregate types that use this mechanism. The fix
here is to adjust the logic such that all return values that flag
'in memory' are considered to use the mechanism *unless* they
provide a struct_value_rtx *and* the return object is an aggregate.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
PR objc/101718 - Objective-C frontend emits wrong code to call methods returning scalar types returned in memory
PR objc/101718
gcc/objc/ChangeLog:
* objc-next-runtime-abi-02.c (build_v2_build_objc_method_call):
Revise for cases where scalar objects use an sret parameter.
(next_runtime_abi_02_build_objc_method_call): Likwise.
Iain Sandoe [Thu, 1 Oct 2020 09:58:58 +0000 (10:58 +0100)]
[PATCH] Objective-C: NeXT runtime fixes.
The NeXT runtime has changed ABI in detail a number of times over Darwin
revisions from 9 to 21. For the most part, the tools are tolerant of use
of older ABI revisions - for X86. However for Arm64 deviations cause
link time errors. This is small set of updates to match the system tools.
1. Objective-C: Addess a FIXME (NFC).
This removes references to the next runtime from the gnu runtime
implementation.
2. Objective-C, Darwin : Use special string sections for V2 NeXT runtime.
Newer versions of the runtime expect to find strings for class, method
and method types in set-aside sections rather than the general c_strings
one.
3. Ojective-C, Darwin : Adjust category superclass ref names (NFC).
Make the order of the class and superclass match the metadata
order from clang. Makes it easier to compare produced meta-
data between implementations.
4. Objective-C: Default flag_objc_sjlj_exceptions off for NeXT ABI >= 2.
As per description.
5. Objective-C, NeXT runtime: Correct the default for fobjc-nilcheck.
It is intended that the default for the NeXT runtime at ABI 2 is to
check for nil message receivers. This updates this to match the
documented behaviour and to match the behaviour of the system tools.
This moves the GTY declaration of the meta-data indentifier
array into the header that enumerates these and provides
shorthand defines for them. This avoids a problem seen with
a relocatable PCH implementation.
7. Objective-C, NeXT: Adjust symbol marking to match host tools.
Current host tools mark some additional symbols as 'no dead strip' and also
expose one additional group to the linker. This does not affect older Darwin
versions or x86_64, but omitting these changes results in link errors for
aarch64.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> Signed-off-by: Matt Jacobson <mhjacobson@me.com>
gcc/c-family/ChangeLog:
* c-opts.c (c_common_post_options): Default to
flag_objc_sjlj_exceptions = 1 only when flag_objc_abi < 2.
gcc/ChangeLog:
* config/darwin-sections.def (objc2_class_names_section,
objc2_method_names_section, objc2_method_types_section): New
* config/darwin.c (output_objc_section_asm_op): Output new
sections. (darwin_objc2_section): Select new sections where
used.
(darwin_label_is_anonymous_local_objc_name): Make
protocol class methods linker-visible.
gcc/objc/ChangeLog:
* objc-next-metadata-tags.h (objc_rt_trees): Declare here.
* objc-next-runtime-abi-01.c: Remove from here.
(generate_static_references): Likewise.
* objc-next-runtime-abi-02.c: Likewise.
(objc_next_runtime_abi_02_init): Warn about and reset
flag_objc_sjlj_exceptions regardless of flag_objc_exceptions.
(next_runtime_02_initialize): Use a checking assert that
flag_objc_sjlj_exceptions is off.
(next_runtime_abi_02_category_decl): Adjust category
superclass name ordering.
(next_runtime_abi_02_init_metadata_attributes): Attach metadata
for the special string sections to class, method and method type
string sections.
(next_runtime_abi_02_protocol_decl): Do not dead-strip the runtime
meta-data symbols.
(build_v2_classrefs_table): Likewise.
(build_v2_protocol_list_address_table): Likewise.
(objc_next_runtime_abi_02_init): Default receiver nilchecks on.
* objc-runtime-shared-support.c: Reorder headers, provide
a GTY declaration the definition of objc_rt_trees.
* objc-gnu-runtime-abi-01.c
(build_shared_structure_initializer): Remove references to
the NeXT runtime.
Iain Sandoe [Mon, 16 Nov 2020 19:33:35 +0000 (19:33 +0000)]
C-family : Fix a C++ ODR violation [PR97854].
The changes in r11-4799 introduced a dummy enum rid type with
a different initial member name to the actual version (an ODR
violation). Fixed by including the header declaring the
actual type.
gcc/c-family/ChangeLog:
PR objc/97854
* stub-objc.c: Include c-common.h to declare enum rid.
Iain Sandoe [Thu, 4 Nov 2021 09:37:14 +0000 (09:37 +0000)]
IPA: Provide a mechanism to register static DTORs via cxa_atexit.
For at least one target (Darwin) the platform convention is to
register static destructors (i.e. __attribute__((destructor)))
with __cxa_atexit rather than placing them into a list that is
run by some other mechanism.
This patch provides a target hook that allows a target to opt
into this and handling for the process in ipa_cdtor_merge ().
When the mode is enabled (dtors_from_cxa_atexit is set) we:
* Generate new CTORs to register static destructors with
__cxa_atexit and add them to the existing list of CTORs;
we then process the revised CTORs list.
* We sort the DTORs into priority and then TU order, this
means that they are registered in that order with
__cxa_atexit () and therefore will be run in the reverse
order.
* Likewise, CTORs are sorted into priority and then TU order,
which means that they will run in that order.
This matches the behavior of using init/fini (or
mod_init_func/mod_term_func) sections.
This also fixes a bug where Fortran needs a DTOR to be run to
close IO.
* config/darwin.h (TARGET_DTORS_FROM_CXA_ATEXIT): New.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in: Add TARGET_DTORS_FROM_CXA_ATEXIT hook.
* ipa.c (cgraph_build_static_cdtor_1): Return the built
function decl.
(build_cxa_atexit_decl): New.
(build_dso_handle_decl): New.
(build_cxa_dtor_registrations): New.
(compare_cdtor_tu_order): New.
(build_cxa_atexit_fns): New.
(ipa_cdtor_merge): If dtors_from_cxa_atexit is set,
process the DTORs/CTORs accordingly.
(pass_ipa_cdtor_merge::gate): Also run if
dtors_from_cxa_atexit is set.
* target.def (dtors_from_cxa_atexit): New hook.
Iain Sandoe [Sun, 10 Jan 2021 09:48:13 +0000 (09:48 +0000)]
Darwin, testsuite : Prune 'object file not found for object'.
This is not a GCC problem, but a fault in the static linker where,
when a source file is used multiple times, with conditional compilation
the source file is only referenced by the linker for the first object.
Then, when dsymutil tries to find the source file for next object based
off that source there is no record for it.
gcc/testsuite/ChangeLog:
* lib/prune.exp: Prune useless output caused by a linker bug.
Iain Sandoe [Sat, 14 Aug 2021 11:27:55 +0000 (12:27 +0100)]
Objective-C: fix crash with -fobjc-nilcheck
When -fobjc-nilcheck is enabled, messages that result in a struct type should
yield a zero-initialized struct when sent to nil. Currently, the frontend
crashes when it encounters this situation. This patch fixes the crash by
generating the tree for the `{}` initializer.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> Co-authored-by: Matt Jacobson <mhjacobson@me.com>
PR objc/101666
Iain Sandoe [Mon, 3 May 2021 07:22:53 +0000 (08:22 +0100)]
Darwin, X86: Adjust call clobbers to allow for lazy-binding [PR 100152].
We allow public functions defined in a TU to bind locally for PIC
code (the default) on 64bit Mach-O.
If such functions are not inlined, we cannot tell at compile-time if
they might be called via the lazy symbol resolver (this can depend on
options given at link-time). Therefore, we must assume that the lazy
resolver could be used which clobbers R11 and R10.
PR target/100152
* config/i386/i386-expand.c (ix86_expand_call): If a call is
to a non-local-binding, or local but to a public symbol, then
assume that it might be indirected via the lazy symbol binder.
Mark R10 and R10 as clobbered in that case.
Iain Sandoe [Mon, 7 Feb 2022 15:36:35 +0000 (15:36 +0000)]
Darwin, rs6000: Amend lo_sum use for forced constants [PR104117].
Two issues resulted in this PR, which manifests when we force a constant into
memory in LRA (in PIC code on Darwin). The presence of such forced constants
is quite dependent on other RTL optimisations, and it is easy for the issue to
become latent for a specific case.
First, in the Darwin-specific rs6000 backend code, we were not being careful
enough in rejecting invalid symbolic addresses. Specifically, when generating
PIC code, we require a SYMBOL_REF to be wrapped in an UNSPEC_MACHOPIC_OFFSET.
We now split the Darwin high/low selectors into two:
1. One that handles non-PIC addresses (kernel mode, mdynamic-no-pic).
2. One that handles PIC addresses and rejects SYMBOL_REFs unless they are
suitably wrapped in the MACHOPIC_OFFSET unspec.
The second case is handled by providing a new predicate (macho_pic_address)
that checks the requirements.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> Co-authored-by: Vladimir Makarov <vmakarov@redhat.com>
PR target/104117
gcc/ChangeLog:
* config/rs6000/rs6000.c (darwin_rs6000_legitimate_lo_sum_const_p):
Check for UNSPEC_MACHOPIC_OFFSET wrappers on symbolic addresses when
emitting PIC code.
(legitimate_lo_sum_address_p): Likewise.
(rs6000_legitimize_address): Do not apply the TLS processing to
Darwin.
* config/rs6000/darwin.md (@machopic_high_<mode>): New.
(@machopic_low_<mode>): New.
* config/rs6000/predicates.md (macho_pic_address): New.
Darwin: Rework handling for unwinder code in libgcc_s and specs [PR80556].
This addresses a long-standing problem where a work-around for an unwinder
issue (also a regression) regresses other functionality. The patch replaces
several work-arounds with a fix for PR80556 and a work-around for PR88590.
* The fix for PR80556 requires a bump to the SO name for libgcc_s, since we
need to remove the unwinder symbols from it. This would trigger PR88590
hence the work-around for that.
* We weaken the symbols for emulated TLS support so that it is possible
for a DSO linked with static-libgcc to interoperate with a DSO linked with
libgcc_s. Likewise main exes.
* We remove all the gcc-4.2.1 era stubs machinery and workarounds.
* libgcc is always now linked ahead of libc, which avoids fails where the
libc (libSystem) builtins implementations are not up to date.
* The unwinder now always comes from the system
- for Darwin9 from /usr/lib/libgcc_s.1.dylib
- for Darwin10 from /usr/lib/libSystem.dylib
- for Darwin11+ from /usr/lib/system/libunwind.dylib.
We still insert a shim on Darwin10 to fix an omitted unwind function, but
the underlying unwinder remains the system one.
* The work-around for PR88590 has two parts (1) we always link libgcc from
its convenience lib on affected system versions (avoiding the need to find
the DSO path); (2) we add and export the emutls functions from DSOs - this
makes a relatively small (20k) addition to a DSO. These can be backed out
when a proper fix for PR88590 is committed.
For distributions that wish to install a libgcc_s.1.dylib to satisfy linkage
from exes that linked against the stubs can use a reexported libgcc_s.1.1
(since that contains all the symbols that were previously exported via the
stubs).
The replacement libgcc_s.1 forwards the symbols from the new SO.
In order to support DYLD_LIBRARY_PATH on systems (where it works)
we forward the libSystem unwinder symbols from 10.7+ and a
compiler-local version of the libgcc unwinder on earlier.
For macOS 10.4 to 10.6 this is 'bug-compatible' with existing uses.
For 10.7+ the behaviour will now actually be correct.
* config.host: Add weak emutls crt to the extra_parts.
(*-*-darwin*): Add logic to build a shared unwinder library for
Darwin8-10. Add shim declaration header to powerpc*-darwin builds.
* config/i386/darwin-lib.h (DECLARE_LIBRARY_RENAMES): Remove
workaround.
* config/libgcc-libsystem.ver: Add exclude list for the system-
provided unwinder.
* config/t-slibgcc-darwin: Bump SO version, remove stubs code.
Build a legacy libgcc_s.1 and the supporting pieces (all FAT libs).
* config/t-darwin-ehs: Add dependencies to the shared unwinder
objects. Add dependency on unwind.h.
* config/t-darwin: Reorganise the EH fragments to place them for
inclusion in a shared EH lib. Add libgcc_tm.h to the dependencies
for darwin10-unwind-find-enc-func.
* config/i386/libgcc-darwin.10.4.ver: Removed.
* config/i386/libgcc-darwin.10.5.ver: Removed.
* config/rs6000/libgcc-darwin.10.4.ver: Removed.
* config/rs6000/libgcc-darwin.10.5.ver: Removed.
* config/i386/t-darwin: Build legacy libgcc_s.1.
* config/rs6000/t-darwin: Likewise.
* config/rs6000/t-darwin-ehs: Remove dependency on the powerpc end
file. Add darwin-fallback.o.
libgcc, emutls: Allow building weak definitions of the emutls functions.
In order to better support use of the emulated TLS between objects with
DSO dependencies and static-linked libgcc, allow a target to make weak
definitions.
projects / thirdparty / gcc.git / log
