Marco Crivellari [Thu, 27 Nov 2025 14:41:24 +0000 (15:41 +0100)]
platform: x86: replace use of system_wq with system_percpu_wq
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
Marco Crivellari [Thu, 27 Nov 2025 14:41:23 +0000 (15:41 +0100)]
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Derek J. Clark [Thu, 27 Nov 2025 15:16:05 +0000 (07:16 -0800)]
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
Add Legion Go 2 SKU's to the Extreme Mode quirks table.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/20251127151605.1018026-4-derekjohn.clark@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Derek J. Clark [Thu, 27 Nov 2025 15:16:04 +0000 (07:16 -0800)]
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
When developing the gamezone WMI drivers, "extreme mode" was matched to
the performance platform profile and "performance" was matched to the
balanced-performance platform profile, but only if extreme mode was
fully supported; otherwise performance was matched to the "performance"
platform profile. This has led to quite a bit of confusion with users
not understanding why the LED color indicating the platform profile
doesn't match their expectations.
To solve this, replace the confusing convention by using the new
max-power profile to represent "extreme mode". While add it, update the
documentation to reflect the expected LED colors in each operating mode.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/20251127151605.1018026-3-derekjohn.clark@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some devices, namely Lenovo Legion devices, have an "extreme" mode where
power draw is at the maximum limit of the cooling hardware. Add a new
"max-power" platform profile to properly reflect this operating mode.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/20251127151605.1018026-2-derekjohn.clark@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shyam Sundar S K [Wed, 19 Nov 2025 08:58:11 +0000 (14:28 +0530)]
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
Define a new macro BIOS_INPUTS_MAX, to represent the maximum number of
BIOS input values. Replace hardcoded array sizes in relevant structures
with this macro to improve readability and maintainability.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: Yijun Shen <Yijun.Shen@Dell.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251119085813.546813-1-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Baojun Xu [Wed, 26 Nov 2025 14:14:33 +0000 (22:14 +0800)]
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
The tas2781-hda supports multi-projects. In some projects, GpioInt() was
dropped due to no IRQ connection. See the example code below:
Device (SPKR)
{
Name (_ADR, One)
Name (_HID, "TXNW2781")
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0038, ...)
I2cSerialBusV2 (0x0039, ...)
// GpioInt (Edge, ...) { 0x0000 }
//"GpioInt (...) {}" was commented out due to no IRQ connection.
})
Return (RBUF)
}
}
But in smi_i2c_probe(), smi_spi_probe() (serial-multi-instantiate.c), if
looking for IRQ by smi_get_irq() fails, it will return an error, will not add
new device, and cause smi_probe() to fail:
[ 2.356546] Serial bus multi instantiate pseudo device driver TXNW2781:00:
error -ENXIO: IRQ index 0 not found
[ 2.356561] Serial bus multi instantiate pseudo device driver TXNW2781:00:
error -ENXIO: Error requesting irq at index 0
So, we need to add an exception case for these situations. BTW, this patch
will take effect on both I2C and SPI devices.
Signed-off-by: Baojun Xu <baojun.xu@ti.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251126141434.11110-1-baojun.xu@ti.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace repetitive switch-case statements for PMF_POLICY_BIOS_OUTPUT_*
with a helper function and consolidated case handling. This reduces code
duplication and improves maintainability.
The 10 BIOS output policies (PMF_POLICY_BIOS_OUTPUT_1 through
PMF_POLICY_BIOS_OUTPUT_10) previously each had individual case statements
with identical logic. This patch introduces
amd_pmf_get_bios_output_idx() to map policy values to array indices,
consolidating the handling into a single case block with fallthrough.
Also, add a new function amd_pmf_update_bios_output() to simplify the code
handling.
This approach handles non-sequential policy enum values gracefully and
makes future additions easier to implement.
Werner Sembach [Thu, 20 Nov 2025 21:49:42 +0000 (22:49 +0100)]
platform/x86/uniwill: Add TUXEDO devices
Add all TUXEDO devices that can make use of this driver.
For the time being just the input part of the driver is used for these
devies. Other features will follow once implemented and/or tested.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20251120215240.436835-3-wse@tuxedocomputers.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Werner Sembach [Thu, 20 Nov 2025 21:49:41 +0000 (22:49 +0100)]
platform/x86/uniwill: Handle more WMI events required for TUXEDO devices
Handle more WMI events that are triggered on TUXEDO devices.
Testing the TUXEDO InfinityBook Pro 15 Gen9 Intel, the Stellaris 16 Gen5
Intel, the Stellaris 16 Gen5 AMD and going through the out of tree
tuxedo-drivers dkms package I identified more WMI events that are used by
Uniwill.
This patch binds them to their respective function, or marks them as
KE_IGNORE when they are send in addition to other actions, to make clear
that they don't need special handling. This also avoids warnings in dmesg.
The events with descriptions from memory:
UNIWILL_OSD_RADIOON and UNIWILL_OSD_RADIOOFF - Sent in addition to the
already handled UNIWILL_OSD_RFKILL on some devices.
UNIWILL_OSD_PERFORMANCE_MODE_TOGGLE - Physical button on some devices. Bind
it to a button so userspace can receive the keypress and do stuff with it.
UNIWILL_OSD_MUTE - Sent in addition to an already handled keypress.
UNIWILL_OSD_KB_LED_LEVEL0 - UNIWILL_OSD_KB_LED_LEVEL4 - Some devices sent
these instead of UNIWILL_OSD_KBDILLUMTOGGLE.
UNIWILL_OSD_WEBCAM_TOGGLE - Sent in addition to deactivating the Webcam on
firmware level.
UNIWILL_OSD_DC_ADAPTER_CHANGED - No special handling required here atm, but
will be for the charging priority feature.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251120215240.436835-2-wse@tuxedocomputers.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform: arm64: thinkpad-t14s-ec: add suspend handler for keyboard backlight
This ensures that the keyboard backlight state is restored after
a suspend-resume cycle. Otherwise the keyboard is automatically
disabled during suspend and then stays disabled after resume.
Note, that this adopts the same behavior as the existing Thinkpad
ACPI driver.
platform: arm64: thinkpad-t14s-ec: add system PM hooks
Improve support for system suspend. The register information has been
extracted from the ACPI DSDT code handling Windows Modern Standby. I
took over the weird multi-write function from the ACPI DSDT code where
it is called ECWS.
In addition to writing to the 0xE0 register, the ACPI Windows Modern
Standby code also does some changes to the thermal configuration. This
part is not implemented.
After this patch the laptop's power and LID LEDs will switch into the
typical breathing animation when the system is suspended and enabled
normally again after resuming.
Denis Benato [Sun, 23 Nov 2025 15:05:35 +0000 (16:05 +0100)]
platform/x86: asus-armoury: fix only DC tunables being available
Module asus-armoury must use AC tunables to check availability
of power-related firmware attributes: fix missing attributes
by using AC attributes instead of DC.
The Ayaneo EC resets after hibernation, losing the charge control state.
Add a small PM hook to restore this state on hibernation resume.
The fan speed is also lost during hibernation, but since hibernation
failures are common with this class of devices, setting a low fan speed
when the userspace program controlling the fan will potentially not
take over could cause the device to overheat, so it is not restored.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-7-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec
Currently, the oxpec driver contains Ayaneo devices. Move them to the
new ayaneo-ec driver, which is dedicated to them.
As this driver supports charge inhibition for Ayaneo, add support for it
for the AIR, AIR 1S, AB05-Medoncino, AIR Pro, and Kun, referenced from
the out-of-tree ayaneo-platform driver.
In addition, update the readmes of oxpec to reflect this change.
platform/x86: ayaneo-ec: Add controller power and modules attributes
The Ayaneo 3 features hot-swappable controller modules. The ejection
and management is done through HID. However, after ejecting the modules,
the controller needs to be power cycled via the EC to re-initialize.
For this, the EC provides a variable that holds whether the left or
right modules are connected, and a power control register to turn
the controller on or off. After ejecting the modules, the controller
should be turned off. Then, after both modules are reinserted,
the controller may be powered on again to re-initialize.
This patch introduces two new sysfs attributes:
- `controller_modules`: a read-only attribute that indicates whether
the left and right modules are connected (none, left, right, both).
- `controller_power`: a read-write attribute that allows the user
to turn the controller on or off (with '1'/'0').
Therefore, after ejection is complete, userspace can power off the
controller, then wait until both modules have been reinserted
(`controller_modules` will return 'both') to turn on the controller.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-5-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: ayaneo-ec: Add charge control support
Ayaneo devices support charge inhibition via the EC. This inhibition
only works while the device is powered on, and resets between restarts.
However, it is maintained across suspend/resume cycles.
The EC does not support charge threshold control. Instead, userspace
software on Windows manually toggles charge inhibition depending on
battery level.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-4-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Recent Ayaneo devices feature an ACPI mapped Embedded Controller (EC)
with standard addresses across models that provides access to fan
speed, fan control, battery charge limits, and controller power
controls. Introduce a new driver stub that will handle these driver
features.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-2-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shyam Sundar S K [Thu, 20 Nov 2025 10:52:10 +0000 (16:22 +0530)]
platform/x86/amd/pmf: Replace magic table id with METRICS_TABLE_ID
Add METRICS_TABLE_ID (7) and use it when requesting the metrics
transfer table instead of the hard-coded literal. This clarifies the
meaning of the argument to amd_pmf_send_cmd() and centralizes the table
ID definition for easier maintenance.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251120105210.3945710-4-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shyam Sundar S K [Thu, 20 Nov 2025 10:52:09 +0000 (16:22 +0530)]
platform/x86/amd/pmf: Use explicit SET_CMD/GET_CMD flags in amd_pmf_send_cmd()
Add SET_CMD and GET_CMD constants and replace boolean values passed as the
get/set argument to amd_pmf_send_cmd() with the new explicit flags. This
improves readability, avoids ambiguity around true/false and 0/1 usage.
There is no functional change.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20251120105210.3945710-3-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shyam Sundar S K [Thu, 20 Nov 2025 10:52:08 +0000 (16:22 +0530)]
platform/x86/amd/pmf: Rename IPU metrics fields to NPU for consistency
Update smu_pmf_metrics_v2 to use NPU terminology instead of IPU. This
aligns the driver with current firmware/hardware naming and fixes the
mismatch. There is no functional change and no impact to the struct layout
and only field names are updated.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Link: https://patch.msgid.link/20251120105210.3945710-2-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Armin Wolf [Tue, 11 Nov 2025 13:11:25 +0000 (14:11 +0100)]
platform/x86: wmi: Move WMI core code into a separate directory
Move the WMI core code into a separate directory to prepare for
future additions to the WMI driver. Also update the description
of the Kconfig entry to better fit with the other subsystem
Kconfig entries.
Armin Wolf [Tue, 11 Nov 2025 13:11:23 +0000 (14:11 +0100)]
platform/x86: wmi: Use correct type when populating ACPI objects
When evaluating a WMxx/WSxx ACPI control method, the data buffer
either needs to be passed as an ACPI buffer or as an ACPI string.
Use the correct type (buffer/string) when populating the associated
ACPI object.
Armin Wolf [Tue, 11 Nov 2025 13:11:22 +0000 (14:11 +0100)]
fs/nls: Fix utf16 to utf8 conversion
Currently the function responsible for converting between utf16 and
utf8 strings will ignore any characters that cannot be converted. This
however also includes multi-byte characters that do not fit into the
provided string buffer.
This can cause problems if such a multi-byte character is followed by
a single-byte character. In such a case the multi-byte character might
be ignored when the provided string buffer is too small, but the
single-byte character might fit and is thus still copied into the
resulting string.
Fix this by stop filling the provided string buffer once a character
does not fit. In order to be able to do this extend utf32_to_utf8()
to return useful errno codes instead of -1.
Fixes: 74675a58507e ("NLS: update handling of Unicode") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251111131125.3379-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Luke D. Jones [Sun, 2 Nov 2025 21:53:19 +0000 (22:53 +0100)]
platform/x86: asus-armoury: add ppt_* and nv_* tuning knobs
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mateusz Schyboll <dragonn@op.pl> Tested-by: Porfet Lillian <porfet828@gmail.com> Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Luke D. Jones [Sun, 2 Nov 2025 21:53:17 +0000 (22:53 +0100)]
platform/x86: asus-wmi: deprecate bios features
With the existence of the asus-armoury module the attributes no longer
need to live under the /sys/devices/platform/asus-nb-wmi/ path.
Deprecate all those that were implemented in asus-bioscfg with the goal
of removing them fully in the next LTS cycle.
Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20251102215319.3126879-8-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add screen_auto_brightness toggle supported on some laptops.
Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251102215319.3126879-7-denis.benato@linux.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Luke D. Jones [Sun, 2 Nov 2025 21:53:14 +0000 (22:53 +0100)]
platform/x86: asus-armoury: add apu-mem control support
Implement the APU memory size control under the asus-armoury module using
the fw_attributes class.
This allows the APU allocated memory size to be adjusted depending on
the users priority. A reboot is required after change.
Co-developed-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://patch.msgid.link/20251102215319.3126879-5-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add panel_hd_mode to toggle the panel mode between single and high
definition modes.
Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251102215319.3126879-4-denis.benato@linux.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Luke D. Jones [Sun, 2 Nov 2025 21:53:12 +0000 (22:53 +0100)]
platform/x86: asus-armoury: move existing tunings to asus-armoury module
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Luke D. Jones [Sun, 2 Nov 2025 21:53:11 +0000 (22:53 +0100)]
platform/x86: asus-wmi: export symbols used for read/write WMI
Export symbols for reading/writing WMI symbols using a namespace.
Existing functions:
- asus_wmi_evaluate_method
- asus_wmi_set_devstate
New function:
- asus_wmi_get_devstate_dsts
The new function is intended for use with DSTS WMI method only and
avoids requiring the asus_wmi driver data to select the WMI method.
Co-developed-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20251102215319.3126879-2-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Armin Wolf [Sun, 2 Nov 2025 17:29:42 +0000 (18:29 +0100)]
Documentation: laptops: Add documentation for uniwill laptops
Add documentation for admins regarding Uniwill laptops. This should
help them to setup the uniwill-laptop driver, which sadly cannot be
loaded automatically.
Reported-by: cyear <chumuzero@gmail.com> Closes: https://github.com/lm-sensors/lm-sensors/issues/508 Closes: https://github.com/Wer-Wolf/uniwill-laptop/issues/3 Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251102172942.17879-3-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Armin Wolf [Sun, 2 Nov 2025 17:29:41 +0000 (18:29 +0100)]
platform/x86: Add Uniwill laptop driver
Add a new driver for Uniwill laptops. The driver uses a ACPI
interface to talk with the embedded controller, but relies on a
ACPI WMI interface for receiving event notifications.
The driver is reverse-engineered based on the following information:
- OEM software from intel
- https://github.com/pobrn/qc71_laptop
- https://gitlab.com/tuxedocomputers/development/packages/tuxedo-drivers
- https://github.com/tuxedocomputers/tuxedo-control-center
The underlying EC supports various features, including hwmon sensors,
battery charge limiting, a RGB lightbar and keyboard-related controls.
Reported-by: cyear <chumuzero@gmail.com> Closes: https://github.com/lm-sensors/lm-sensors/issues/508 Closes: https://github.com/Wer-Wolf/uniwill-laptop/issues/3 Tested-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251102172942.17879-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GBMD/SBMC interface on recent devices supports Rapid Charge mode
(charge_types: Fast) in addition to Conservation Mode (charge_types:
Long_Life).
Query the GBMD interface on probe to determine if a device supports
Rapid Charge. If so, expose these two modes while carefully maintaining
their mutually exclusive state, which aligns with the behavior of
manufacturer utilities on Windows.
Signed-off-by: Rong Zhang <i@rong.moe> Acked-by: Ike Panhc <ikepanhc@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-By: Jelle van der Waa <jelle@vdwaa.nl> Link: https://patch.msgid.link/20251105182832.104946-5-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rong Zhang [Wed, 5 Nov 2025 18:28:26 +0000 (02:28 +0800)]
platform/x86: ideapad-laptop: Support multiple power_supply_ext definitions
Some recent devices supports more charge_types. To properly support
these device without breaking the existing ones, we need to define
multiple power_supply_ext for different GBMD/SBMC interface revisions.
Rong Zhang [Wed, 5 Nov 2025 18:28:25 +0000 (02:28 +0800)]
platform/x86: ideapad-laptop: Protect GBMD/SBMC calls with mutex
The upcoming changes for Rapid Charge support require two consecutive
SBMC calls to switch charge_types. Hence, a mutex is required.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe> Acked-by: Ike Panhc <ikepanhc@gmail.com> Link: https://patch.msgid.link/20251105182832.104946-3-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Markus Elfring [Mon, 20 Oct 2025 14:52:35 +0000 (16:52 +0200)]
platform/x86: x86-android-tablets: Omit a variable reassignment in lenovo_yoga_tab2_830_1050_init_codec()
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Markus Elfring [Mon, 20 Oct 2025 14:34:59 +0000 (16:34 +0200)]
platform/surface: aggregator: Omit a variable reassignment in ssam_serial_hub_probe()
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Armin Wolf [Thu, 16 Oct 2025 18:00:08 +0000 (20:00 +0200)]
platform/x86: acer-wmi: Add support for PHN16-72
A user reported that the config of the PH16-72 also works on
the PHN16-72. Add support for this new device as well.
Suggested-by: Fa-Iz Faadhillah Ibrahim <faiz.faadhillah@gmail.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251016180008.465593-5-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Armin Wolf [Thu, 16 Oct 2025 18:00:05 +0000 (20:00 +0200)]
platform/x86: acer-wmi: Fix setting of fan behavior
After studying the linuwu_sense driver
(https://github.com/0x7375646F/Linuwu-Sense) i was able to understand
the meaning of the SetGamingFanBehavior() WMI method:
- the first 16-bit are a bitmap of all fans affected by a fan behavior
change request.
- the next 8 bits contain four fan mode fields (2-bit), each being
associated with a bit inside the fan bitmap.
There are three fan modes: auto, turbo and custom.
Use this newfound knowledge to fix the turbo fan handling by setting
the correct bits before calling SetGamingFanBehavior(). Also check
the result of the WMI method call and return an error should the ACPI
firmware signal failure.
Reviewed-by: Kurt Borja <kuurtb@gmail.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251016180008.465593-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove has_die_c6 variable from the pmc_dev struct. This variable
is unnecessary as the availability of die C6 could be inferred by
the punit_ep variable.
Xi Pardee [Tue, 14 Oct 2025 21:45:33 +0000 (14:45 -0700)]
platform/x86:intel/pmc: Relocate lpm_req_guid to pmc_reg_map
Relocate the lpm_req_guid field from pmc_info to pmc_reg_map. The
previous implementation stored lpm_req_guid in pmc_info and relied
on pmc_core_find_guid() to retrieve the correct GUID, which was
unnecessary. Since lpm_req_guid is specific to PMC, pmc_reg_map is
a more appropriate location for this information.
Xi Pardee [Tue, 14 Oct 2025 21:45:31 +0000 (14:45 -0700)]
platform/x86:intel/pmc: Add DMU GUID to Arrow Lake U/H
Arrow Lake U/H platforms may have multiple GUIDs pointing to the
same telemetry region. Add the second possible GUID to the GUID
list to support the Arrow Lake U/H platforms with this GUID.
Xi Pardee [Tue, 14 Oct 2025 21:45:30 +0000 (14:45 -0700)]
platform/x86:intel/pmc: Add support for multiple DMU GUIDs
Enable support for multiple DMU GUIDs to accommodate Arrow
Lake H/U platforms. Arrow Lake U/H may have several GUIDs
pointing to a single telemetry region providing die C6 value
Add support to search for available GUIDs.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://patch.msgid.link/20251014214548.629023-3-xi.pardee@linux.intel.com
[ij: add include & reverse logic in a loop] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Xi Pardee [Tue, 14 Oct 2025 21:45:29 +0000 (14:45 -0700)]
platform/x86:intel/pmc: Update Arrow Lake telemetry GUID
Update ARL_PMT_DMU_GUID value. Arrow Lake PMT DMU GUID has been updated
after it was add to the driver. This updates ensures that the die C6
value is available in the debug filesystem.
platform/x86/amd/hsmp: Replace amd_num_nodes() with topology_max_packages()
The amd_num_nodes() function returns the number of data fabrics present.
On older EPYC processors, there was one data fabric per socket.
However, newer EPYC processors have more than one data fabric per
socket, leading to a situation where the number of sockets is not equal
to the number of data fabrics. Therefore, it is appropriate to use
topology_max_packages() to know the number of sockets in the system.
Also remove node.h header inclusion and socket number comparison against
data fabric nodes.
plat.c is supported only for legacy platforms where socket number and
data fabric numbers are same. So it can remain unchanged.
This field is set to 1/0 when the HD audio device is enabled/disabled
using the _PS0/_PS3 ACPI control methods. Add support for this field
to avoid printing warning messages when AML bytecode writes data
into it.
Reported-by: Peter Chubb <peter@chubb.wattle.id.au> Tested-by: Peter Chubb <peter@chubb.wattle.id.au> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251008064112.5981-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Kuan-Wei Chiu [Sat, 11 Oct 2025 06:38:37 +0000 (14:38 +0800)]
platform/x86/amd: hfi: Remove redundant assignment to .owner
The coccicheck tool reports the following warning for this driver:
./hfi.c:509:3-8: No need to set .owner here. The core will do it.
The manual assignment of .owner = THIS_MODULE; in the platform_driver
struct is redundant. The platform_driver_register() function, which is
called to register the driver, is a macro that automatically sets the
driver's owner to THIS_MODULE.
The driver core handles this assignment internally, making the explicit
initialization in the struct definition unnecessary. Remove the
unnecessary line.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20251011063837.2318535-3-visitorckw@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Kuan-Wei Chiu [Sat, 11 Oct 2025 06:38:36 +0000 (14:38 +0800)]
platform/x86/amd: hfi: Remove unused cpumask from cpuinfo struct
The cpus field within the struct amd_hfi_cpuinfo was allocated and set
in the amd_hfi_online() CPU hotplug callback, and subsequently freed in
the amd_hfi_offline() callback.
However, after being initialized, this cpumask was never read or used
for any purpose within the driver. It represents dead code that serves
no functional role.
This change has no impact on the driver's functionality as the removed
code was entirely superfluous.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20251011063837.2318535-2-visitorckw@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Linus Torvalds [Sun, 12 Oct 2025 20:27:56 +0000 (13:27 -0700)]
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
Linus Torvalds [Sun, 12 Oct 2025 15:45:52 +0000 (08:45 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
Linus Torvalds [Sat, 11 Oct 2025 23:06:04 +0000 (16:06 -0700)]
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
Linus Torvalds [Sat, 11 Oct 2025 22:47:12 +0000 (15:47 -0700)]
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Linus Torvalds [Sat, 11 Oct 2025 18:56:47 +0000 (11:56 -0700)]
Merge tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
driver gets alarm support. We also get a fix for a race condition that
was fairly rare unless while stress testing the alarms.
Subsystem:
- Fix race when setting alarm
- Ensure alarm irq is enabled when UIE is enabled
- remove unneeded 'fast_io' parameter in regmap_config
New driver:
- SpacemiT P1 RTC
Drivers:
- efi: Remove wakeup functionality
- optee: add alarms support
- s3c: Drop support for S3C2410
- zynqmp: Restore alarm functionality after kexec transition"
* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
rtc: tps6586x: Fix initial enable_irq/disable_irq balance
rtc: cpcap: Fix initial enable_irq/disable_irq balance
rtc: isl12022: Fix initial enable_irq/disable_irq balance
rtc: interface: Fix long-standing race when setting alarm
rtc: pcf2127: fix watchdog interrupt mask on pcf2131
rtc: zynqmp: Restore alarm functionality after kexec transition
rtc: amlogic-a4: Optimize global variables
rtc: sd2405al: Add I2C address.
rtc: Kconfig: move symbols to proper section
rtc: optee: make optee_rtc_pm_ops static
rtc: optee: Fix error code in optee_rtc_read_alarm()
rtc: optee: fix error code in probe()
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
rtc: spacemit: support the SpacemiT P1 RTC
rtc: optee: add alarm related rtc ops to optee rtc driver
rtc: optee: remove unnecessary memory operations
rtc: optee: fix memory leak on driver removal
rtc: x1205: Fix Xicor X1205 vendor prefix
dt-bindings: rtc: Fix Xicor X1205 vendor prefix
...
Linus Torvalds [Sat, 11 Oct 2025 18:49:00 +0000 (11:49 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
Linus Torvalds [Sat, 11 Oct 2025 18:19:16 +0000 (11:19 -0700)]
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
Linus Torvalds [Sat, 11 Oct 2025 17:51:14 +0000 (10:51 -0700)]
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Linus Torvalds [Sat, 11 Oct 2025 17:40:24 +0000 (10:40 -0700)]
Merge tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"A NULL pointer deref hotfix"
* tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix barn NULL pointer dereference on memoryless nodes
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
Linus Torvalds [Sat, 11 Oct 2025 17:27:52 +0000 (10:27 -0700)]
Merge tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
Linus Torvalds [Sat, 11 Oct 2025 17:14:55 +0000 (10:14 -0700)]
Merge tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
This is because fortify string sees that the size of entry->id is only 4
bytes, but it is writing more than that. But this is OK as the
dynamic_array is allocated to handle that copy.
The size allocated on the ring buffer was actually a bit too big:
size = sizeof(*entry) + cnt;
But cnt includes the 'id' and the buffer data, so adding cnt to the size
of *entry actually allocates too much on the ring buffer.
Vlastimil Babka [Sat, 11 Oct 2025 08:45:41 +0000 (10:45 +0200)]
slab: fix barn NULL pointer dereference on memoryless nodes
Phil reported a boot failure once sheaves become used in commits 59faa4da7cd4 ("maple_tree: use percpu sheaves for maple_node_cache") and 3accabda4da1 ("mm, vma: use percpu sheaves for vm_area_struct cache"):
Linus decoded the stacktrace to get_barn() and get_node() and determined
that kmem_cache->node[numa_mem_id()] is NULL.
The problem is due to a wrong assumption that memoryless nodes only
exist on systems with CONFIG_HAVE_MEMORYLESS_NODES, where numa_mem_id()
points to the nearest node that has memory. SLUB has been allocating its
kmem_cache_node structures only on nodes with memory and so it does with
struct node_barn.
For kmem_cache_node, get_partial_node() checks if get_node() result is
not NULL, which I assumed was for protection from a bogus node id passed
to kmalloc_node() but apparently it's also for systems where
numa_mem_id() (used when no specific node is given) might return a
memoryless node.
Fix the sheaves code the same way by checking the result of get_node()
and bailing out if it's NULL. Note that cpus on such memoryless nodes
will have degraded sheaves performance, which can be improved later,
preferably by making numa_mem_id() work properly on such systems.
Steven Rostedt [Sat, 11 Oct 2025 03:51:42 +0000 (23:51 -0400)]
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20251011035243.386098147@kernel.org Fixes: 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read user space") Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
After commit 5ab23c7923a1 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:
riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1
The relocation appears to come from .LASANLOC5 in .data.rel.local:
This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.
There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.
Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.
Fixes: 5ab23c7923a1 ("modpost: Create modalias for builtin modules") Reported-by: Charles Mirabile <cmirabil@redhat.com> Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/ Suggested-by: Alexey Gladkov <legion@kernel.org> Tested-by: Nicolas Schier <nsc@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Linus Torvalds [Fri, 10 Oct 2025 21:06:02 +0000 (14:06 -0700)]
Merge tag 'for-6.18/hpfs-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull hpfs updates from Mikulas Patocka:
- Avoid -Wflex-array-member-not-at-end warnings
- Replace simple_strtoul with kstrtoint
- Fix error code for new_inode() failure
* tag 'for-6.18/hpfs-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
fs/hpfs: Fix error code for new_inode() failure in mkdir/create/mknod/symlink
hpfs: Replace simple_strtoul with kstrtoint in hpfs_parse_param
fs: hpfs: Avoid multiple -Wflex-array-member-not-at-end warnings
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
Linus Torvalds [Fri, 10 Oct 2025 20:59:38 +0000 (13:59 -0700)]
Merge tag 'drm-fixes-2025-10-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Some fixes leftover from our fixes branch, just nouveau and vmwgfx:
nouveau:
- Return errno code from TTM move helper
vmwgfx:
- Fix null-ptr access in cursor code
- Fix UAF in validation
- Use correct iterator in validation"
* tag 'drm-fixes-2025-10-11' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix bad ret code in nouveau_bo_move_prep
drm/vmwgfx: Fix copy-paste typo in validation
drm/vmwgfx: Fix Use-after-free in validation
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[robh: Also drop [A-F] in unit address] Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Linus Torvalds [Fri, 10 Oct 2025 18:30:19 +0000 (11:30 -0700)]
Merge tag 'ceph-for-6.18-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- some messenger improvements (Eric and Max)
- address an issue (also affected userspace) of incorrect permissions
being granted to users who have access to multiple different CephFS
instances within the same cluster (Kotresh)
- a bunch of assorted CephFS fixes (Slava)
* tag 'ceph-for-6.18-rc1' of https://github.com/ceph/ceph-client:
ceph: add bug tracking system info to MAINTAINERS
ceph: fix multifs mds auth caps issue
ceph: cleanup in ceph_alloc_readdir_reply_buffer()
ceph: fix potential NULL dereference issue in ceph_fill_trace()
libceph: add empty check to ceph_con_get_out_msg()
libceph: pass the message pointer instead of loading con->out_msg
libceph: make ceph_con_get_out_msg() return the message pointer
ceph: fix potential race condition on operations with CEPH_I_ODIRECT flag
ceph: refactor wake_up_bit() pattern of calling
ceph: fix potential race condition in ceph_ioctl_lazyio()
ceph: fix overflowed constant issue in ceph_do_objects_copy()
ceph: fix wrong sizeof argument issue in register_session()
ceph: add checking of wait_for_completion_killable() return value
ceph: make ceph_start_io_*() killable
libceph: Use HMAC-SHA256 library instead of crypto_shash
Linus Torvalds [Fri, 10 Oct 2025 18:23:57 +0000 (11:23 -0700)]
Merge tag 'v6.18-rc-part2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix i_size in fallocate
- two truncate fixes
- utime fix
- minor cleanups
- SMB1 fixes
- improve error check in read
- improve perf of copy file_range (copy_chunk)
* tag 'v6.18-rc-part2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: Add comments for DeletePending assignments in open functions
cifs: Add fallback code path for cifs_mkdir_setinfo()
cifs: Allow fallback code in smb_set_file_info() also for directories
cifs: Query EA $LXMOD in cifs_query_path_info() for WSL reparse points
smb: client: remove cfids_invalidation_worker
smb: client: remove redudant assignment in cifs_strict_fsync()
smb: client: fix race with fallocate(2) and AIO+DIO
smb: client: fix missing timestamp updates after utime(2)
smb: client: fix missing timestamp updates after ftruncate(2)
smb: client: fix missing timestamp updates with O_TRUNC
cifs: Fix copy_to_iter return value check
smb: client: batch SRV_COPYCHUNK entries to cut round trips
smb: client: Omit an if branch in smb2_find_smb_tcon()
smb: client: Return directly after a failed genlmsg_new() in cifs_swn_send_register_message()
smb: client: Use common code in cifs_do_create()
smb: client: Improve unlocking of a mutex in cifs_get_swn_reg()
smb: client: Return a status code only as a constant in cifs_spnego_key_instantiate()
smb: client: Use common code in cifs_lookup()
smb: client: Reduce the scopes for a few variables in two functions
Linus Torvalds [Fri, 10 Oct 2025 18:20:19 +0000 (11:20 -0700)]
Merge tag 'xtensa-20251010' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- minor cleanups
* tag 'xtensa-20251010' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: use HZ_PER_MHZ in platform_calibrate_ccount
xtensa: simdisk: add input size check in proc_write_simdisk
Linus Torvalds [Fri, 10 Oct 2025 17:37:13 +0000 (10:37 -0700)]
Merge tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Don't include __GFP_NOWARN for loop worker allocation, as it already
uses GFP_NOWAIT which has __GFP_NOWARN set already
- Small series cleaning up the recent bio_iov_iter_get_pages() changes
- loop fix for leaking the backing reference file, if validation fails
- Update of a comment pertaining to disk/partition stat locking
* tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: remove redundant __GFP_NOWARN flag
block: move bio_iov_iter_get_bdev_pages to block/fops.c
iomap: open code bio_iov_iter_get_bdev_pages
block: rename bio_iov_iter_get_pages_aligned to bio_iov_iter_get_pages
block: remove bio_iov_iter_get_pages
block: Update a comment of disk statistics
loop: fix backing file reference leak on validation error
Linus Torvalds [Fri, 10 Oct 2025 17:25:24 +0000 (10:25 -0700)]
Merge tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fixup indentation in the UAPI header
- Two fixes for zcrx. One fixes receiving too much in some cases, and
the other deals with not correctly incrementing the source in the
fallback copy loop
- Fix for a race in the IORING_OP_WAITID command, where there was a
small window where the request would be left on the wait_queue_head
list even though it was being canceled/completed
- Update liburing git URL in the kernel tree
* tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: increment fallback loop src offset
io_uring/zcrx: fix overshooting recv limit
io_uring: use tab indentation for IORING_SEND_VECTORIZED comment
io_uring/waitid: always prune wait queue entry in io_waitid_wait()
io_uring: update liburing git URL
Merge patch series "kbuild: Fixes for fallout from recent modules.builtin.modinfo series"
This is a series to address some problems that were exposed by the
recent modules.builtin.modinfo series that landed in commit c7d3dd9163e6
("Merge patch series "Add generated modalias to
modules.builtin.modinfo"").
The third patch is not directly related to the aforementioned series, as
the warning it fixes happens prior to the series but commit 8d18ef04f940
("s390: vmlinux.lds.S: Reorder sections") from the series creates
conflicts in this area, so I included it here.
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
When building s390 defconfig with binutils older than 2.32, there are
several warnings during the final linking stage:
s390-linux-ld: .tmp_vmlinux1: warning: allocated section `.got.plt' not in segment
s390-linux-ld: .tmp_vmlinux2: warning: allocated section `.got.plt' not in segment
s390-linux-ld: vmlinux.unstripped: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: vmlinux: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: st7afZyb: warning: allocated section `.got.plt' not in segment
binutils commit afca762f598 ("S/390: Improve partial relro support for
64 bit") [1] in 2.32 changed where .got.plt is emitted, avoiding the
warning.
The :NONE in the .vmlinux.info output section description changes the
segment for subsequent allocated sections. Move .vmlinux.info right
above the discards section to place all other sections in the previously
defined segment, .data.
Prior to binutils commit c12d9fa2afe ("Support objcopy
--remove-section=.relaFOO") [1] in 2.32, stripping relocation sections
required the trailing period (i.e., '.rel.*') to work properly.
After commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped"), there is an error with binutils 2.31.1 or earlier
because these sections are not properly removed:
s390-linux-objcopy: st6tO8Ev: symbol `.modinfo' required but not present
s390-linux-objcopy:st6tO8Ev: no symbols
Add the old pattern to resolve this issue (along with a comment to allow
cleaning this when binutils 2.32 or newer is the minimum supported
version). While the aforementioned kbuild change exposes this, the
pattern was originally changed by commit 71d815bf5dfd ("kbuild: Strip
runtime const RELA sections correctly"), where it would still be
incorrect with binutils older than 2.32.
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
Commit 0ce5139fd96e ("kbuild: always create intermediate
vmlinux.unstripped") removed the pattern to avoid stripping .rela.dyn
sections added by commit e9d86b8e17e7 ("scripts: Do not strip .rela.dyn
section"). Restore it so that .rela.dyn sections remain in the final
vmlinux.
KaFai Wan [Wed, 8 Oct 2025 10:26:27 +0000 (18:26 +0800)]
selftests/bpf: Add test for unpinning htab with internal timer struct
Add test to verify that unpinning hash tables containing internal timer
structures does not trigger context warnings.
Each subtest (timer_prealloc and timer_no_prealloc) can trigger the
context warning when unpinning, but the warning cannot be triggered
twice within a short time interval (a HZ), which is expected behavior.
KaFai Wan [Wed, 8 Oct 2025 10:26:26 +0000 (18:26 +0800)]
bpf: Avoid RCU context warning when unpinning htab with internal structs
When unpinning a BPF hash table (htab or htab_lru) that contains internal
structures (timer, workqueue, or task_work) in its values, a BUG warning
is triggered:
BUG: sleeping function called from invalid context at kernel/bpf/hashtab.c:244
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
...
The issue arises from the interaction between BPF object unpinning and
RCU callback mechanisms:
1. BPF object unpinning uses ->free_inode() which schedules cleanup via
call_rcu(), deferring the actual freeing to an RCU callback that
executes within the RCU_SOFTIRQ context.
2. During cleanup of hash tables containing internal structures,
htab_map_free_internal_structs() is invoked, which includes
cond_resched() or cond_resched_rcu() calls to yield the CPU during
potentially long operations.
However, cond_resched() or cond_resched_rcu() cannot be safely called from
atomic RCU softirq context, leading to the BUG warning when attempting
to reschedule.
Fix this by changing from ->free_inode() to ->destroy_inode() and rename
bpf_free_inode() to bpf_destroy_inode() for BPF objects (prog, map, link).
This allows direct inode freeing without RCU callback scheduling,
avoiding the invalid context warning.
Reported-by: Le Chen <tom2cat@sjtu.edu.cn> Closes: https://lore.kernel.org/all/1444123482.1827743.1750996347470.JavaMail.zimbra@sjtu.edu.cn/ Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20251008102628.808045-2-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
projects / thirdparty / linux.git / log
