Paolo Abeni [Tue, 22 Jul 2025 09:35:51 +0000 (11:35 +0200)]
Merge branch 'gve-af_xdp-zero-copy-for-dqo-rda'
Joshua Washington says:
====================
gve: AF_XDP zero-copy for DQO RDA
This patch series adds support for AF_XDP zero-copy in the DQO RDA queue
format.
XSK infrastructure is updated to re-post buffers when adding XSK pools
because XSK umem will be posted directly to the NIC, a departure from
the bounce buffer model used in GQI QPL. A registry of XSK pools is
introduced to prevent the usage of XSK pools when in copy mode.
gve: implement DQO RX datapath and control path for AF_XDP zero-copy
Add the RX datapath for AF_XDP zero-copy for DQ RDA. The RX path is
quite similar to that of the normal XDP case. Parallel methods are
introduced to properly handle XSKs instead of normal driver buffers.
To properly support posting from XSKs, queues are destroyed and
recreated, as the driver was initially making use of page pool buffers
instead of the XSK pool memory.
Expose support for AF_XDP zero-copy, as the TX and RX datapaths both
exist.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-6-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
gve: implement DQO TX datapath for AF_XDP zero-copy
In the descriptor clean path, a number of changes need to be made to
accommodate out of order completions and double completions.
The XSK stack can only handle completions being processed in order, as a
single counter is incremented in xsk_tx_completed to sigify how many XSK
descriptors have been completed. Because completions can come back out
of order in DQ, a separate queue of XSK descriptors must be maintained.
This queue keeps the pending packets in the order that they were written
so that the descriptors can be counted in xsk_tx_completed in the same
order.
For double completions, a new pending packet state and type are
introduced. The new type, GVE_TX_PENDING_PACKET_DQO_XSK, plays an
anlogous role to pre-existing _SKB and _XDP_FRAME pending packet types
for XSK descriptors. The new state, GVE_PACKET_STATE_XSK_COMPLETE,
represents packets for which no more completions are expected. This
includes packets which have received a packet completion or reinjection
completion, as well as packets whose reinjection completion timer have
timed out. At this point, such packets can be counted as part of
xsk_tx_completed() and freed.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-5-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relying on xsk_get_pool_from_qid for getting whether zero copy is
enabled on a queue is erroneous, as an XSK pool is registered in
xp_assign_dev whether AF_XDP zero-copy is enabled or not. This becomes
problematic when queues are restarted in copy mode, as all RX queues
with XSKs will register a pool, causing the driver to exercise the
zero-copy codepath.
This patch adds a bitmap to keep track of which queues have zero-copy
enabled.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-4-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existence of both of these xdp_rxq and xsk_rxq is redundant. xdp_rxq
can be used in both the zero-copy mode and the copy mode case. XSK pool
memory model registration is prioritized over normal memory model
registration to ensure that memory model registration happens only once
per queue.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-3-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
gve: deduplicate xdp info and xsk pool registration logic
The XDP registration path currently has a lot of reused logic, leading
changes to the codepaths to be unnecessarily complex. gve_reg_xsk_pool
extracts the logic of registering an XSK pool with a queue into a method
that can be used by both XDP_SETUP_XSK_POOL and gve_reg_xdp_info.
gve_unreg_xdp_info is used to undo XDP info registration in the error
path instead of explicitly unregistering the XDP info, as it is more
complete and idempotent.
This patch will be followed by other changes to the XDP registration
logic, and will simplify those changes due to the use of common methods.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-2-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
ethtool: rss: support creating and removing contexts via Netlink
This series completes support of RSS configuration via Netlink.
All functionality supported by the IOCTL is now supported by
Netlink. Future series (time allowing) will add:
- hashing on the flow label, which started this whole thing;
- pinning the RSS context to a Netlink socket for auto-cleanup.
The first patch is a leftover held back from previous series
to avoid conflicting with Gal's fix.
Next 4 patches refactor existing code to make reusing it for
context creation possible. 2 patches after that add create
and delete commands. Last but not least the test is extended.
====================
Jakub Kicinski [Thu, 17 Jul 2025 23:43:43 +0000 (16:43 -0700)]
selftests: drv-net: rss_api: context create and delete tests
Add test cases for creating and deleting contexts.
TAP version 13
1..12
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm # SKIP no input-xfrm supported
ok 10 rss_api.test_rxfh_fields_ntf
ok 11 rss_api.test_rss_ctx_add
ok 12 rss_api.test_rss_ctx_ntf
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
Jakub Kicinski [Thu, 17 Jul 2025 23:43:42 +0000 (16:43 -0700)]
ethtool: rss: support removing contexts via Netlink
Implement removing additional RSS contexts via Netlink.
Technically it'd be possible to shoehorn the delete operation
into ethnl_request_ops-compatible handler. The code ends
up longer than open coded version, and I think we'll need
a custom way of sending notifications at some stage (if we
allow tying the context lifetime to the netlink socket, in
the future).
Jakub Kicinski [Thu, 17 Jul 2025 23:43:41 +0000 (16:43 -0700)]
ethtool: rss: support creating contexts via Netlink
Support creating contexts via Netlink. Setting flow hashing
fields on the new context is not supported at this stage,
it can be added later.
An empty indirection table is not supported. This is a carry
over from the IOCTL interface where empty indirection table
meant delete. We can repurpose empty indirection table in
Netlink but for now to avoid confusion reject it using the
policy.
Support letting user choose the ID for the new context. This was
not possible in IOCTL since the context ID field for the create
action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value.
Jakub Kicinski [Thu, 17 Jul 2025 23:43:39 +0000 (16:43 -0700)]
ethtool: rss: factor out populating response from context
Similarly to previous change, factor out populating the response.
We will use this after the context was allocated to send a notification
so this time factor out from the additional context handling, rather
than context 0 handling (for request context didn't exist, for response
it does).
Jakub Kicinski [Thu, 17 Jul 2025 23:43:38 +0000 (16:43 -0700)]
ethtool: rss: factor out allocating memory for response
To ease the code reuse for RSS_CREATE we'll want to prepare
struct rss_reply_data for the new context. Unfortunately
we can't depend on the exiting scaffolding because the context
doesn't exist (ctx=NULL) when we start preparing. Factor out
the portion of the context 0 handling responsible for allocation
of request memory, so that we can call it directly.
Jakub Kicinski [Thu, 17 Jul 2025 23:43:36 +0000 (16:43 -0700)]
ethtool: assert that drivers with sym hash are consistent for RSS contexts
Supporting per-RSS context configuration of hashing fields but
not the hashing algorithm would complicate the code a lot.
We'd need to cross check the config against all RSS contexts.
None of the drivers need this today, so explicitly prevent
new drivers with such skewed capabilities from registering.
If such driver appears it will need to first adjust the checks
in the core.
====================
mptcp: add TCP_MAXSEG sockopt support
The TCP_MAXSEG socket option was not supported by MPTCP, mainly because
it has never been requested before. But there are still valid use-cases,
e.g. with HAProxy.
- Patch 1 is a small cleanup patch in the MPTCP sockopt file.
- Patch 2 expose some code from TCP, to avoid duplicating it in MPTCP.
- Patch 3 adds TCP_MAXSEG sockopt support in MPTCP.
- Patch 4 is not related to the others, it fixes a typo in a comment.
Note that the new TCP_MAXSEG sockopt support has been validated by a new
packetdrill script on the MPTCP CI:
The TCP_MAXSEG socket option is currently not supported by MPTCP, mainly
because it has never been requested before. But there are still valid
use-cases, e.g. with HAProxy.
This patch adds its support in MPTCP by propagating the value to all
subflows. The get part looks at the value on the first subflow, to be as
closed as possible to TCP. Only one value can be returned for the cached
MSS, so this can come only from one subflow.
Similar to mptcp_setsockopt_first_sf_only(), a generic helper
mptcp_setsockopt_all_subflows() is added to set sockopt for each
subflows of the mptcp socket.
Add a new member for struct mptcp_sock to store the TCP_MAXSEG value,
and return this value in getsockopt.
s390/qeth: Make hw_trap sysfs attribute idempotent
Update qeth driver to allow writing an existing value to the "hw_trap"
sysfs attribute. Attempting such a write earlier resulted in -EINVAL.
In other words, make the sysfs attribute idempotent.
Luo Jie [Fri, 18 Jul 2025 13:57:48 +0000 (21:57 +0800)]
net: phy: qcom: qca807x: Enable WoL support using shared library
The Wake-on-LAN (WoL) functionality for the QCA807x series is identical
to that of the AT8031. WoL support for QCA807x is enabled by utilizing
the at8031_set_wol() function provided in the shared library.
net: usb: smsc95xx: add support for ethtool pause parameters
Implement ethtool .get_pauseparam and .set_pauseparam handlers for
configuring flow control on smsc95xx. The driver now supports enabling
or disabling transmit and receive pause frames, with or without
autonegotiation. Pause settings are applied during link-up based on
current PHY state and user configuration.
Previously, the driver used phy_get_pause() during link-up handling,
but lacked initialization and an ethtool interface to configure pause
modes. As a result, flow control support was effectively non-functional.
For idpf:
Ahmed and Sudheer add support for flow steering via ntuple filters.
Current support is for IPv4 and TCP/UDP only.
Milena adds support for cross timestamping.
Ahmed preserves coalesce settings across resets.
For ice:
Alex adds reporting of 40GbE speed in devlink port split.
Dawid adds support for E835 devices.
Jesse refactors profile ptype processing for cleaner, more readable,
code.
Dave adds a couple of helper functions for LAG to reduce code
duplication.
For igc:
Siang adds support to configure "Default Queue" during runtime using
ethtool's Network Flow Classification (NFC) wildcard rule approach.
For igbvf:
Yuto Ohnuki removes unused fields from igbvf_adapter.
For ixgbevf:
Yuto Ohnuki removes unused fields from ixgbevf_adapter.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbevf: remove unused fields from struct ixgbevf_adapter
igbvf: remove unused fields from struct igbvf_adapter
igc: Add wildcard rule support to ethtool NFC using Default Queue
igc: Relocate RSS field definitions to igc_defines.h
ice: breakout common LAG code into helpers
ice: convert ice_add_prof() to bitmap
ice: add E835 device IDs
ice: add 40G speed to Admin Command GET PORT OPTION
idpf: preserve coalescing settings across resets
idpf: add cross timestamping
idpf: add flow steering support
virtchnl2: add flow steering support
virtchnl2: rename enum virtchnl2_cap_rss
====================
Add PM suspend/resume callbacks for RZ/G3E SMARC EVK.
The PM deep entry is executed by pressing the SLEEP button and exit from
entry is by pressing the power button.
Logs:
root@smarc-rzg3e:~# PM: suspend entry (deep)
Filesystems sync: 0.115 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
NOTICE: BL2: v2.10.5(release):2.10.5/rz_soc_dev-162-g7148ba838
NOTICE: BL2: Built : 14:23:58, Jul 5 2025
NOTICE: BL2: SYS_LSI_MODE: 0x13e06
NOTICE: BL2: SYS_LSI_DEVID: 0x8679447
NOTICE: BL2: SYS_LSI_PRR: 0x0
NOTICE: BL2: Booting BL31
renesas-gbeth 15c30000.ethernet end0: Link is Down
Disabling non-boot CPUs ...
psci: CPU3 killed (polled 0 ms)
psci: CPU2 killed (polled 0 ms)
psci: CPU1 killed (polled 0 ms)
Enabling non-boot CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x0000000014960000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
CPU1 is up
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x0000000014980000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
CPU2 is up
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000149a0000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU3 is up
dwmac4: Master AXI performs fixed burst length 15c30000.ethernet end0: No Safety Features support found 15c30000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported 15c30000.ethernet end0: configuring for phy/rgmii-id link mode
dwmac4: Master AXI performs fixed burst length 15c40000.ethernet end1: No Safety Features support found 15c40000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported 15c40000.ethernet end1: configuring for phy/rgmii-id link mode
OOM killer enabled.
Restarting tasks: Starting
Restarting tasks: Done
random: crng reseeded on system resumption
PM: suspend exit
15c30000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
root@smarc-rzg3e:~# ifconfig end0 192.168.10.7 up
root@smarc-rzg3e:~# ping 192.168.10.1
PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data.
64 bytes from 192.168.10.1: icmp_seq=1 ttl=64 time=2.05 ms
64 bytes from 192.168.10.1: icmp_seq=2 ttl=64 time=0.928 ms
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250717071109.8213-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds complete support for hardware-based PTP (IEEE 1588)
timestamping to the AMD XGBE driver.
- Initialize and configure the MAC PTP registers based on link
speed and reference clock.
- Support both 50MHz and 125MHz PTP reference clocks.
- Update the driver interface and version data to support PTP
clock frequency selection.
Remove the hwptp abstraction and associated callbacks from
the struct xgbe_hw_if {}.
The callback structure was only ever assigned a single function, without
null checks. This cleanup inlines the logic and moves all the hwtstamp
realted code a separate file, improving readability and maintainance.
be2net: Use correct byte order and format string for TCP seq and ack_seq
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
====================
net: maintain netif vs dev prefix semantics
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate. We care only
about driver-visible APIs, don't touch stack-internal routines.
The rest seem to be ok:
* dev_xdp_prog_count - mostly called by sw drivers (bonding), should not matter
* dev_get_by_xxx - too many to reasonably cleanup, already have different flavors
* dev_fetch_sw_netstats - don't need instance lock
* dev_get_tstats64 - never called directly, only as an ndo callback
* dev_pick_tx_zero - never called directly, only as an ndo callback
* dev_add_pack / dev_remove_pack - called early enough (in module init) to not matter
* dev_get_iflink - mostly called by sw drivers, should not matter
* dev_fill_forward_path - ditto
* dev_getbyhwaddr_rcu - ditto
* dev_getbyhwaddr - ditto
* dev_getfirstbyhwtype - ditto
* dev_valid_name - ditto
* __dev_forward_skb dev_forward_skb dev_queue_xmit_nit - established helpers, no netif vs dev distinction
====================
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_close_many is used only by vlan/dsa and one mtk driver, so move it into
NETDEV_INTERNAL namespace.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Note that one dev_set_threaded call still remains in mt76 for debugfs file.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
__netif_set_mtu is used only by bond, so move it into
NETDEV_INTERNAL namespace.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_pre_changeaddr_notify is used only by ipvlan/bond, so move it into
NETDEV_INTERNAL namespace.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_get_mac_address is used only by tun/tap, so move it into
NETDEV_INTERNAL namespace.
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Virtual devices (e.g., VXLAN) that do not have a notion of a carrier are
created with an "UNKNOWN" operational state which some users find
confusing [1].
It is possible to set the operational state from user space either
during device creation or afterwards and some applications will start
doing that in order to avoid the above problem.
Add a test for this functionality to ensure it does not regress.
net: selftests: add PHY-loopback test for bad TCP checksums
Detect NICs and drivers that either drop frames with a corrupted TCP
checksum or, worse, pass them up as valid. The test flips one bit in
the checksum, transmits the packet in internal loopback, and fails when
the driver reports CHECKSUM_UNNECESSARY.
net: track pfmemalloc drops via SKB_DROP_REASON_PFMEMALLOC
Add a new SKB drop reason (SKB_DROP_REASON_PFMEMALLOC) to track packets
dropped due to memory pressure. In production environments, we've observed
memory exhaustion reported by memory layer stack traces, but these drops
were not properly tracked in the SKB drop reason infrastructure.
While most network code paths now properly report pfmemalloc drops, some
protocol-specific socket implementations still use sk_filter() without
drop reason tracking:
- Bluetooth L2CAP sockets
- CAIF sockets
- IUCV sockets
- Netlink sockets
- SCTP sockets
- Unix domain sockets
These remaining cases represent less common paths and could be converted
in a follow-up patch if needed. The current implementation provides
significantly improved observability into memory pressure events in the
network stack, especially for key protocols like TCP and UDP, helping to
diagnose problems in production environments.
Also removed the following fields from struct igbvf_adapter since they
are never read or used after initialization by igbvf_probe() and igbvf_sw_init().
Song Yoong Siang [Fri, 20 Jun 2025 10:02:51 +0000 (18:02 +0800)]
igc: Add wildcard rule support to ethtool NFC using Default Queue
Introduce support for a lowest priority wildcard (catch-all) rule in
ethtool's Network Flow Classification (NFC) for the igc driver. The
wildcard rule directs all unmatched network traffic, including traffic not
captured by Receive Side Scaling (RSS), to a specified queue. This
functionality utilizes the Default Queue feature available in I225/I226
hardware.
The implementation has been validated on Intel ADL-S systems with two
back-to-back connected I226 network interfaces.
Testing Procedure:
1. On the Device Under Test (DUT), verify the initial statistic:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 0
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 0
2. From the Link Partner, send 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
3. On the DUT, verify the packet reception on Queue 0:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 0
4. On the DUT, add a wildcard rule to route all packets to Queue 3:
$ sudo ethtool -N enp1s0 flow-type ether queue 3
5. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
6. Now, packets are routed to Queue 3 by the wildcard (Default Queue) rule:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 10
7. On the DUT, add a EtherType rule to route ARP packet to Queue 1:
$ sudo ethtool -N enp1s0 flow-type ether proto 0x0806 queue 1
8. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
9. Now, packets are routed to Queue 1 by the EtherType rule because it is
higher priority than the wildcard (Default Queue) rule:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 10
rx_queue_2_packets: 0
rx_queue_3_packets: 10
10. On the DUT, delete all the NFC rules:
$ sudo ethtool -N enp1s0 delete 63
$ sudo ethtool -N enp1s0 delete 64
11. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
12. Now, packets are routed to Queue 0 because the value of Default Queue
is reset back to 0:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 20
rx_queue_1_packets: 10
rx_queue_2_packets: 0
rx_queue_3_packets: 10
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Co-developed-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Song Yoong Siang [Fri, 20 Jun 2025 10:02:50 +0000 (18:02 +0800)]
igc: Relocate RSS field definitions to igc_defines.h
Move the RSS field definitions related to IPv4 and IPv6 UDP from igc.h to
igc_defines.h to consolidate the RSS field definitions in a single header
file, improving code organization and maintainability.
This refactoring does not alter the functionality of the driver but
enhances the logical grouping of related constants
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Mon, 16 Jun 2025 11:03:22 +0000 (13:03 +0200)]
ice: breakout common LAG code into helpers
In the VF handling code, parts of the code for lag can be broken out into
helper functions to reduce code duplication. Break this code out into
helper functions
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jesse Brandeburg [Wed, 18 Jun 2025 11:28:53 +0000 (13:28 +0200)]
ice: convert ice_add_prof() to bitmap
Previously the ice_add_prof() took an array of u8 and looped over it with
for_each_set_bit(), examining each 8 bit value as a bitmap.
This was just hard to understand and unnecessary, and was triggering
undefined behavior sanitizers with unaligned accesses within bitmap
fields (on our internal tools/builds). Since the @ptype being passed in
was already declared as a bitmap, refactor this to use native types with
the advantage of simplifying the code to use a single loop.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> CC: Jesse Brandeburg <jbrandeburg@cloudflare.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dawid Osuchowski [Tue, 20 May 2025 09:30:59 +0000 (11:30 +0200)]
ice: add E835 device IDs
E835 is an enhanced version of the E830.
It continues to use the same set of commands, registers and interfaces
as other devices in the 800 Series.
Following device IDs are added:
- 0x1248: Intel(R) Ethernet Controller E835-CC for backplane
- 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP
- 0x124A: Intel(R) Ethernet Controller E835-CC for SFP
- 0x1261: Intel(R) Ethernet Controller E835-C for backplane
- 0x1262: Intel(R) Ethernet Controller E835-C for QSFP
- 0x1263: Intel(R) Ethernet Controller E835-C for SFP
- 0x1265: Intel(R) Ethernet Controller E835-L for backplane
- 0x1266: Intel(R) Ethernet Controller E835-L for QSFP
- 0x1267: Intel(R) Ethernet Controller E835-L for SFP
Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: add 40G speed to Admin Command GET PORT OPTION
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code
to process this new option in both the devlink and the Admin Queue Command
GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like
ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on.
This feature allows the driver to correctly report configuration options
for 2x40G on E823 and other cards in the future via devlink.
Example command:
devlink port split pci/0000:01:00.0/0 count 2
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ahmed Zaki [Fri, 20 Jun 2025 17:15:48 +0000 (11:15 -0600)]
idpf: preserve coalescing settings across resets
The IRQ coalescing config currently reside only inside struct
idpf_q_vector. However, all idpf_q_vector structs are de-allocated and
re-allocated during resets. This leads to user-set coalesce configuration
to be lost.
Add new fields to struct idpf_vport_user_config_data to save the user
settings and re-apply them after reset.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Milena Olech [Wed, 18 Jun 2025 14:42:36 +0000 (16:42 +0200)]
idpf: add cross timestamping
Add cross timestamp support through virtchnl mailbox messages and directly,
through PCIe BAR registers. Cross timestamping assumes that both system
time and device clock time values are cached simultaneously, what is
triggered by HW. Feature is enabled for both ARM and x86 archs.
Signed-off-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ahmed Zaki [Wed, 23 Apr 2025 19:27:05 +0000 (13:27 -0600)]
idpf: add flow steering support
Use the new virtchnl2 OP codes to communicate with the Control Plane to
add flow steering filters. We add the basic functionality for add/delete
with TCP/UDP IPv4 only. Support for other OP codes and protocols will be
added later.
Standard 'ethtool -N|--config-ntuple' should be used, for example:
Add opcodes and corresponding message structure to add and delete
flow steering rules. Flow steering enables configuration
of rules to take an action or subset of actions based on a match
criteria. Actions could be redirect to queue, redirect to queue
group, drop packet or mark.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Co-developed-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ahmed Zaki [Wed, 23 Apr 2025 19:27:03 +0000 (13:27 -0600)]
virtchnl2: rename enum virtchnl2_cap_rss
The "enum virtchnl2_cap_rss" will be used for negotiating flow
steering capabilities. Instead of adding a new enum, rename
virtchnl2_cap_rss to virtchnl2_flow_types. Also rename the enum's
constants.
Flow steering will use this enum in the next patches.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tianyi Cui [Thu, 17 Jul 2025 01:19:13 +0000 (18:19 -0700)]
selftests/drivers/net: Support ipv6 for napi_id test
Add support for IPv6 environment for napi_id test.
Test Plan:
./run_kselftest.sh -t drivers/net:napi_id.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: napi_id.py
# TAP version 13
# 1..1
# ok 1 napi_id.test_napi_id
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: napi_id.py
Mingming Cao [Wed, 16 Jul 2025 15:21:15 +0000 (11:21 -0400)]
ibmvnic: Use ndo_get_stats64 to fix inaccurate SAR reporting
VNIC testing on multi-core Power systems showed SAR stats drift
and packet rate inconsistencies under load.
Implements ndo_get_stats64 to provide safe aggregation of queue-level
atomic64 counters into rtnl_link_stats64 for use by tools like 'ip -s',
'ifconfig', and 'sar'. Switch to ndo_get_stats64 to align SAR reporting
with the standard kernel interface for retrieving netdev stats.
This removes redundant per-adapter stat updates, reduces overhead,
eliminates cacheline bouncing from hot path updates, and improves
the accuracy of reported packet rates.
Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org>
----
Changes since v3:
link to v3: https://www.spinics.net/lists/netdev/msg1107999.html
-- keep per queue counters as u64 (this patch) and drop off patch 1 in v3
Lama Kayal [Wed, 16 Jul 2025 14:17:47 +0000 (17:17 +0300)]
net/mlx5: HWS, Enable IPSec hardware offload in legacy mode
IPSec hardware offload in legacy mode should not be affected by the
steering mode, hence it should also work properly with hmfs mode.
Remove steering mode validation when calculating the cap for packet
offload, this will also enable the missing cap MLX5_IPSEC_CAP_PRIO
needed for crypto offload.
Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1752675472-201445-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 15 Jul 2025 23:01:19 +0000 (18:01 -0500)]
net: ethernet: mtk_wed: Fix NULL vs IS_ERR() bug in mtk_wed_get_memory_region()
We recently changed this from using devm_ioremap() to using
devm_ioremap_resource() and unfortunately the former returns NULL while
the latter returns error pointers. The check for errors needs to be
updated as well.
Fixes: e27dba1951ce ("net: Use of_reserved_mem_region_to_resource{_byname}() for "memory-region"") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/87c10dbd-df86-4971-b4f5-40ba02c076fb@sabinyo.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 15 Jul 2025 23:01:10 +0000 (18:01 -0500)]
net: airoha: Fix a NULL vs IS_ERR() bug in airoha_npu_run_firmware()
The devm_ioremap_resource() function returns error pointers. It never
returns NULL. Update the check to match.
Fixes: e27dba1951ce ("net: Use of_reserved_mem_region_to_resource{_byname}() for "memory-region"") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/fc6d194e-6bf5-49ca-bc77-3fdfda62c434@sabinyo.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Add shared PHY counter support for QCA807x and QCA808x
The implementation of the PHY counter is identical for both QCA808x and
QCA807x series devices. This includes counters for both good and bad CRC
frames in the RX and TX directions, which are active when CRC checking
is enabled.
This patch series introduces PHY counter functions into a shared library,
enabling counter support for the QCA808x and QCA807x families through this
common infrastructure. Additionally, enable CRC checking and configure
automatic clearing of counters after reading within config_init() to ensure
accurate counter recording.
Luo Jie [Tue, 15 Jul 2025 11:02:28 +0000 (19:02 +0800)]
net: phy: qcom: qca807x: Support PHY counter
Within the QCA807X PHY operation's config_init() function, enable CRC
checking for received and transmitted frames and configure counter to
clear after being read to support counter recording. Additionally, add
support for PHY counter operations.
Luo Jie [Tue, 15 Jul 2025 11:02:27 +0000 (19:02 +0800)]
net: phy: qcom: qca808x: Support PHY counter
Enable CRC checking for received and transmitted frames, and configure
counters to clear after being read within config_init() for accurate
counter recording. Additionally, add PHY counter operations and integrate
shared functions.
Luo Jie [Tue, 15 Jul 2025 11:02:26 +0000 (19:02 +0800)]
net: phy: qcom: Add PHY counter support
Add PHY counter functionality to the shared library. The implementation
is identical for the current QCA807X and QCA808X PHYs.
The PHY counter can be configured to perform CRC checking for both received
and transmitted packets. Additionally, the packet counter can be set to
automatically clear after it is read.
The PHY counter includes 32-bit packet counters for both RX (received) and
TX (transmitted) packets, as well as 16-bit counters for recording CRC
error packets for both RX and TX.
Dennis Chen [Wed, 16 Jul 2025 16:57:50 +0000 (12:57 -0400)]
netdevsim: remove redundant branch
bool notify is referenced nowhere else in the function except to check
whether or not to call rtnl_offload_xstats_notify(). Remove it and move
the call to the previous branch.
We've added 13 non-merge commits during the last 20 day(s) which contain
a total of 4 files changed, 712 insertions(+), 84 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a TCP bpf_iter,
from Jordan Rife.
2) Clarify the driver requirement on using the XDP metadata,
from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
doc: xdp: Clarify driver implementation for XDP Rx metadata
selftests/bpf: Add tests for bucket resume logic in established sockets
selftests/bpf: Create iter_tcp_destroy test program
selftests/bpf: Create established sockets in socket iterator tests
selftests/bpf: Make ehash buckets configurable in socket iterator tests
selftests/bpf: Allow for iteration over multiple states
selftests/bpf: Allow for iteration over multiple ports
selftests/bpf: Add tests for bucket resume logic in listening sockets
bpf: tcp: Avoid socket skips and repeats during iteration
bpf: tcp: Use bpf_tcp_iter_batch_item for bpf_tcp_iter_state batch items
bpf: tcp: Get rid of st_bucket_done
bpf: tcp: Make sure iter->batch always contains a full bucket snapshot
bpf: tcp: Make mem flags configurable through bpf_iter_tcp_realloc_batch
====================
Jakub Kicinski [Wed, 16 Jul 2025 20:57:12 +0000 (13:57 -0700)]
selftests: net: prevent Python from buffering the output
Make sure Python doesn't buffer the output, otherwise for some
tests we may see false positive timeouts in NIPA. NIPA thinks that
a machine has hung if the test doesn't print anything for 3min.
This is also nice to heave for running the tests manually,
especially in vng.
====================
neighbour: Convert RTM_GETNEIGH to RCU and make pneigh RTNL-free.
This is kind of v3 of the series below [0] but without NEIGHTBL patches.
Patch 1 ~ 4 and 9 come from the series to convert RTM_GETNEIGH to RCU.
Other patches clean up pneigh_lookup() and convert the pneigh code to
RCU + private mutex so that we can easily remove RTNL from RTM_NEWNEIGH
in the later series.
neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.
tbl->phash_buckets[] is only modified in the slow path by pneigh_create()
and pneigh_delete() under the table lock.
Both of them are called under RTNL, so no extra lock is needed, but we
will remove RTNL from the paths.
pneigh_create() looks up a pneigh_entry, and this part can be lockless,
but it would complicate the logic like
1. lookup
2. allocate pengih_entry for GFP_KERNEL
3. lookup again but under lock
4. if found, return it after freeing the allocated memory
5. else, return the new one
Instead, let's add a per-table mutex and run lookup and allocation
under it.
Note that updating pneigh_entry part in neigh_add() is still protected
by RTNL and will be moved to pneigh_create() in the next patch.
__pneigh_lookup() is the lockless version of pneigh_lookup(),
but its only caller pndisc_is_router() holds the table lock and
reads pneigh_netry.flags.
This is because accessing pneigh_entry after pneigh_lookup() was
illegal unless the caller holds RTNL or the table lock.
Now, pneigh_entry is guaranteed to be alive during the RCU critical
section.
Let's call pneigh_lookup() and use READ_ONCE() for n->flags in
pndisc_is_router() and remove __pneigh_lookup().
neighbour: Free pneigh_entry after RCU grace period.
We will convert RTM_GETNEIGH to RCU.
neigh_get() looks up pneigh_entry by pneigh_lookup() and passes
it to pneigh_fill_info().
Then, we must ensure that the entry is alive till pneigh_fill_info()
completes, but read_lock_bh(&tbl->lock) in pneigh_lookup() does not
guarantee that.
Also, we will convert all readers of tbl->phash_buckets[] to RCU.
Let's use call_rcu() to free pneigh_entry and update phash_buckets[]
and ->next by rcu_assign_pointer().
pneigh_ifdown_and_unlock() uses list_head to avoid overwriting
->next and moving RCU iterators to another list.
pndisc_destructor() (only IPv6 ndisc uses this) uses a mutex, so it
is not delayed to call_rcu(), where we cannot sleep. This is fine
because the mcast code works with RCU and ipv6_dev_mc_dec() frees
mcast objects after RCU grace period.
While at it, we change the return type of pneigh_ifdown_and_unlock()
to void.
neighbour: Annotate neigh_table.phash_buckets and pneigh_entry.next with __rcu.
The next patch will free pneigh_entry with call_rcu().
Then, we need to annotate neigh_table.phash_buckets[] and
pneigh_entry.next with __rcu.
To make the next patch cleaner, let's annotate the fields in advance.
Currently, all accesses to the fields are under the neigh table lock,
so rcu_dereference_protected() is used with 1 for now, but most of them
(except in pneigh_delete() and pneigh_ifdown_and_unlock()) will be
replaced with rcu_dereference() and rcu_dereference_check().
Note that pneigh_ifdown_and_unlock() changes pneigh_entry.next to a
local list, which is illegal because the RCU iterator could be moved
to another list. This part will be fixed in the next patch.
pneigh_lookup() has ASSERT_RTNL() in the middle of the function, which
is confusing.
When called with the last argument, creat, 0, pneigh_lookup() literally
looks up a proxy neighbour entry. This is the case of the reader path
as the fast path and RTM_GETNEIGH.
pneigh_lookup(), however, creates a pneigh_entry when called with creat 1
from RTM_NEWNEIGH and SIOCSARP, which require RTNL.
Let's split pneigh_lookup() into two functions.
We will convert all the reader paths to RCU, and read_lock_bh(&tbl->lock)
in the new pneigh_lookup() will be dropped.
neighbour: Move neigh_find_table() to neigh_get().
neigh_valid_get_req() calls neigh_find_table() to fetch neigh_tables[].
neigh_find_table() uses rcu_dereference_rtnl(), but RTNL actually does
not protect it at all; neigh_table_clear() can be called without RTNL
and only waits for RCU readers by synchronize_rcu().
Fortunately, there is no bug because IPv4 is built-in, IPv6 cannot be
unloaded, and DECNET was removed.
To fetch neigh_tables[] by rcu_dereference() later, let's move
neigh_find_table() from neigh_valid_get_req() to neigh_get().
Jakub Kicinski [Wed, 16 Jul 2025 00:03:31 +0000 (17:03 -0700)]
selftests: drv-net: rss_api: test input-xfrm and hash fields
Test configuring input-xfrm and hash fields with all the limitations.
Tested on mlx5 (CX6):
# ./ksft-net-drv/drivers/net/hw/rss_api.py
TAP version 13
1..10
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm
ok 10 rss_api.test_rxfh_fields_ntf
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Jakub Kicinski [Wed, 16 Jul 2025 00:03:30 +0000 (17:03 -0700)]
ethtool: rss: support setting flow hashing fields
Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET.
The tricky part is dealing with symmetric hashing. In netlink user
can change the hashing fields and symmetric hash in one request,
in IOCTL the two used to be set via different uAPI requests.
Since fields and hash function config are still separate driver
callbacks - changes to the two are not atomic. Keep things simple
and validate the settings against both pre- and post- change ones.
Meaning that we will reject the config request if user tries
to correct the flow fields and set input_xfrm in one request,
or disables input_xfrm and makes flow fields non-symmetric.
We can adjust it later if there's a real need. Starting simple feels
right, and potentially partially applying the settings isn't nice,
either.
Jakub Kicinski [Wed, 16 Jul 2025 00:03:29 +0000 (17:03 -0700)]
ethtool: rss: support setting input-xfrm via Netlink
Support configuring symmetric hashing via Netlink.
We have the flow field config prepared as part of SET handling,
so scan it for conflicts instead of querying the driver again.
Jakub Kicinski [Wed, 16 Jul 2025 00:03:28 +0000 (17:03 -0700)]
netlink: specs: define input-xfrm enum in the spec
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
Jakub Kicinski [Wed, 16 Jul 2025 00:03:27 +0000 (17:03 -0700)]
selftests: drv-net: rss_api: test setting hashing key via Netlink
Test setting hashing key via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..7
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
projects / thirdparty / linux.git / log
