Michael Brown [Fri, 12 Jun 2020 20:40:33 +0000 (21:40 +0100)]
[tls] Allow a minimum TLS protocol version to be specified
The supported ciphers and digest algorithms may already be specified
via config/crypto.h. Extend this to allow a minimum TLS protocol
version to be specified.
Michael Brown [Wed, 10 Jun 2020 21:52:11 +0000 (22:52 +0100)]
[efi] Attempt to connect our driver directly if ConnectController fails
Some platforms (observed with an AMI BIOS on an Apollo Lake system)
will spuriously fail the call to ConnectController() when the UEFI
network stack is disabled. This appears to be a BIOS bug that also
affects attempts to connect any non-iPXE driver to the NIC controller
handle via the UEFI shell "connect" utility.
Work around this BIOS bug by falling back to calling our
efi_driver_start() directly if the call to ConnectController() fails.
This bypasses any BIOS policy in terms of deciding which driver to
connect but still cooperates with the UEFI driver model in terms of
handle ownership, since the use of EFI_OPEN_PROTOCOL_BY_DRIVER ensures
that the BIOS is aware of our ownership claim.
Michael Brown [Fri, 5 Jun 2020 09:01:19 +0000 (10:01 +0100)]
[uri] Avoid appearing to access final byte of a potentially empty string
The URI parsing code for "host[:port]" checks that the final character
is not ']' in order to allow for IPv6 literals. If the entire
"host[:port]" portion of the URL is an empty string, then this will
access the preceding character. This does not result in accessing
invalid memory (since the string is guaranteed by construction to
always have a preceding character) and does not result in incorrect
behaviour (since if the string is empty then strrchr() is guaranteed
to return NULL), but it does make the code confusing to read.
Michael Brown [Fri, 5 Jun 2020 08:40:36 +0000 (09:40 +0100)]
[efi] Work around UEFI specification bug in LoadImage for SAN boot
As described in the previous commit, work around a UEFI specification
bug that necessitates calling UnloadImage if the return value from
LoadImage is EFI_SECURITY_VIOLATION.
Michael Brown [Thu, 4 Jun 2020 21:24:21 +0000 (22:24 +0100)]
[efi] Work around UEFI specification bug in LoadImage
iPXE currently assumes that any error returned from LoadImage()
indicates that the image was not loaded. This assumption was correct
at the time the code was written and remained correct for UEFI
specifications up to and including version 2.1.
In version 2.3, the UEFI specification broke API and ABI compatibility
by defining that a return value of EFI_SECURITY_VIOLATION would now
indicate that the image had been loaded and a valid image handle had
been created, but that the image should not be started.
The wording in version 2.2 is ambiguous, and does not define whether
or not a return value of EFI_SECURITY_VIOLATION indicates that a valid
image handle has been created.
Attempt to work around all of these incompatible and partially
undefined APIs by calling UnloadImage if we get a return value of
EFI_SECURITY_VIOLATION. Minimise the risk of passing an uninitialised
pointer to UnloadImage by setting ImageHandle to NULL prior to calling
LoadImage.
Ignat Korchagin [Fri, 13 Dec 2019 16:17:58 +0000 (16:17 +0000)]
[snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec
According to UEFI specification 2.8 p 24.1 we must set the
EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit in the "Disable" mask, when
"ResetMCastFilter" is TRUE.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Split-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Ignat Korchagin [Fri, 13 Dec 2019 16:17:58 +0000 (16:17 +0000)]
[snp] Try promiscuous multicast receive filter if the regular one fails
Currently, if the SNP driver for whatever reason fails to enable
receive filters for multicast frames, it falls back to enabling just
unicast and broadcast filters. This breaks some IPv6 functionality as
the network card does not respond to neighbour solicitation requests.
Some cards refuse to enable EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST, but
do support enabling EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST,
so try it before falling back to just unicast+broadcast.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Split-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Sun, 29 Sep 2019 19:59:22 +0000 (20:59 +0100)]
[lan78xx] Always enable automatic speed and duplex detection
On devices with no EEPROM or OTP, the MAC_CR register defaults to not
using automatic link speed detection, with the result that no packets
are successfully sent or received.
Fix by always enabling automatic speed and duplex detection, since
iPXE provides no mechanism for manual configuration of either link
speed or duplex.
Michael Brown [Sun, 15 Sep 2019 09:40:23 +0000 (10:40 +0100)]
[efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown
On at least some platforms (observed with a Raspberry Pi), any attempt
to perform USB transfers via EFI_USB_IO_PROTOCOL during EFI shutdown
will lock up the system. This is quite probably due to the already
documented failure of all EFI timers when ExitBootServices() is
called: see e.g. commit 5cf5ffea2 "[efi] Work around temporal anomaly
encountered during ExitBootServices()".
Work around this problem by refusing to poll endpoints if shutdown is
in progress, and by immediately failing any attempts to enqueue new
transfers.
Michael Brown [Sun, 15 Sep 2019 09:25:46 +0000 (10:25 +0100)]
[efi] Report failed control transfers as expected by the USB core
The USB core reuses the I/O buffer space occupied by the USB setup
packet to hold the completion status for message transfers, assuming
that the message() method will always strip the setup packet before
returning. This assumption is correct for all of the hardware
controller drivers (XHCI, EHCI, and UHCI), since these drivers are
able to enqueue the transfer as a separate action from waiting for the
transfer to complete.
The EFI_USB_IO_PROTOCOL does not allow us to separate actions in this
way: there is only a single blocking method that both enqueues and
waits for completion. Our usbio driver therefore currently defers
stripping the setup packet until the control endpoint is polled.
This causes a bug if a message transfer is enqueued but never polled
and is subsequently cancelled, since the cancellation will be reported
with the I/O buffer still containing the setup packet. This breaks
the assumption that the setup packet has been stripped, and triggers
an assertion failure in usb_control_complete().
Fix by always stripping the setup packet in usbio_endpoint_message(),
and adjusting usbio_control_poll() to match.
Michael Brown [Sat, 17 Aug 2019 16:18:54 +0000 (17:18 +0100)]
[coverity] Override assumptions about wcrtomb() and hmac_init()
Newer versions of Coverity use built-in models for wcrtomb() and
hmac_init() that are capable of returning errors, and reports defects
due to code failing to check for these errors. The actual iPXE
implementations are simpler than Coverity's models and can never
return errors, so these defects are false positives.
Fix by overriding Coverity's built-in models for these functions.
Michael Brown [Sat, 17 Aug 2019 00:18:34 +0000 (01:18 +0100)]
[crypto] Drag in configured digestInfo prefixes for any use of RSA
Ensure that the configured RSA digestInfo prefixes are included in any
build that includes rsa.o (rather than relying on x509.o or tls.o also
being present in the final binary).
This allows the RSA self-tests to be run in isolation.
Michael Brown [Fri, 16 Aug 2019 21:40:19 +0000 (22:40 +0100)]
[tls] Add missing call to tls_tx_resume() when restarting negotiation
The restart of negotiation triggered by a HelloRequest currently does
not call tls_tx_resume() and so may end up leaving the connection in
an idle state in which the pending ClientHello is never sent.
Fix by calling tls_tx_resume() as part of tls_restart(), since the
call to tls_tx_resume() logically belongs alongside the code that sets
bits in tls->tx_pending.
Michael Brown [Fri, 16 Aug 2019 20:42:49 +0000 (21:42 +0100)]
[peerdist] Limit number of concurrent raw block downloads
Raw block downloads are expensive if the origin server uses HTTPS,
since each concurrent download will require local TLS resources
(including potentially large received encrypted data buffers).
Raw block downloads may also be prohibitively slow to initiate when
the origin server is using HTTPS and client certificates. Origin
servers for PeerDist downloads are likely to be running IIS, which has
a bug that breaks session resumption and requires each connection to
go through the full client certificate verification.
Limit the total number of concurrent raw block downloads to ameliorate
these problems.
Michael Brown [Fri, 16 Aug 2019 20:23:55 +0000 (21:23 +0100)]
[peerdist] Start block download timers from within opener methods
Move the responsibility for starting the block download timers from
peerblk_expired() to peerblk_raw_open() and peerblk_retrieval_open(),
in preparation for adding the ability to defer calls to
peerblk_raw_open() via a block download queue.
Michael Brown [Mon, 22 Jul 2019 13:51:28 +0000 (14:51 +0100)]
[build] Do not apply WORKAROUND_CFLAGS for host compiler
The WORKAROUND_CFLAGS list is constructed based on running tests on
the target compiler, and the results may not be valid for the host
compiler.
The only relevant workaround required for the host compiler is
-Wno-stringop-truncation, which is needed to avoid a spurious compiler
warning for a totally correct usage of strncpy() in util/elf2efi.c.
Duplicating the workaround tests for the host compiler is messy, as is
conditionally applying __attribute__((nonstring)). Fix instead by
disapplying WORKAROUND_CFLAGS for the host compiler, and using
memcpy() with an explicitly calculated length instead of strncpy() in
util/elf2efi.c.
Reported-by: Ignat Korchagin <ignat@cloudflare.com> Reported-by: Christopher Clark <christopher.w.clark@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Compiling with gcc 9.1 generates lots of "taking address of packed
member of ... may result in an unaligned pointer value" warnings.
Some of these warnings are genuine, and indicate correctly that parts
of iPXE currently require the CPU (or runtime environment) to support
unaligned accesses. For example: the TCP/IP receive data path will
attempt to access 32-bit fields that may not be aligned to a 32-bit
boundary.
Other warnings are either spurious (such as when the pointer is to a
variable-length byte array, which can have no alignment requirement
anyway) or unhelpful (such as when the pointer is used solely to
provide a debug colour value for the DBGC() macro).
There appears to be no easy way to silence the spurious warnings.
Since the ability to perform unaligned accesses is already a
requirement for iPXE, work around the problem by silencing this class
of warnings.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Fri, 19 Jul 2019 16:35:39 +0000 (17:35 +0100)]
[fdt] Add ability to parse a MAC address from a flattened device tree
The Raspberry Pi NIC has no EEPROM to hold the MAC address. The
platform firmware (e.g. UEFI or U-Boot) will typically obtain the MAC
address from the VideoCore firmware and add it to the device tree,
which is then made available to subsequent programs such as iPXE or
the Linux kernel.
Add the ability to parse a flattened device tree and to extract the
MAC address.
Michael Brown [Mon, 15 Jul 2019 11:49:47 +0000 (12:49 +0100)]
[efi] Return only registered EFI devices from efidev_parent()
efidev_parent() currently assumes that any device with BUS_TYPE_EFI is
part of a struct efi_device. This assumption is not valid, since the
code in efi_device_info() may also create a device with BUS_TYPE_EFI.
Fix by searching through the list of registered EFI devices when
looking for a match, instead of relying on the bus type value.
Michael Brown [Sun, 14 Jul 2019 14:27:01 +0000 (15:27 +0100)]
[arm] Provide dummy implementations for {in,out}[s]{b,w,l}
It is currently not possible to build the all-drivers iPXE binaries
for ARM, since there is no implementation for inb(), outb(), etc.
There is no common standard for accessing I/O space on ARM platforms,
and there are almost no ARM-compatible peripherals that actually
require I/O space accesses.
Provide dummy implementations that behave as though no device is
present (i.e. ignore writes, return all bits high for reads). This is
sufficient to allow the all-drivers binaries to link, and should cause
drivers to behave as though no I/O space peripherals are present in
the system.
Michael Brown [Sun, 14 Jul 2019 13:05:48 +0000 (14:05 +0100)]
[build] Fix use of inline assembly on GCC 8 ARM64 builds
Commit 1a7746603 ("[build] Fix use of inline assembly on GCC 4.8 ARM64
builds") switched from using "%c0" to "%a0" in order to avoid an
"invalid operand prefix" error on the ARM64 version of GCC 4.8.
It appears that the ARM64 version of GCC 8 now produces an "invalid
address mode" error for the "%a0" form, but is happy with the original
"%c0" form.
Switch back to using the "%c0" form, on the assumption that the
requirement for "%a0" was a temporary aberration.
Originally-fixed-by: John L. Jolly <jjolly@suse.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Wed, 24 Apr 2019 21:11:14 +0000 (22:11 +0100)]
[intelxl] Choose to operate in non-PXE mode
The physical function defaults to operating in "PXE mode" after a
power-on reset. In this mode, receive descriptors are fetched and
written back as single descriptors. In normal (non-PXE mode)
operation, receive descriptors are fetched and written back only as
complete cachelines unless an interrupt is raised.
There is no way to return to PXE mode from non-PXE mode, and there is
no way for the virtual function driver to operate in PXE mode.
Choose to operate in non-PXE mode. This requires us to trick the
hardware into believing that it is raising an interrupt, so that it
will not defer writing back receive descriptors until a complete
cacheline (i.e. four packets) have been consumed. We do so by
configuring the hardware to use MSI-X with a dummy target location in
place of the usual APIC register.
Michael Brown [Wed, 24 Apr 2019 15:47:16 +0000 (16:47 +0100)]
[intelxl] Split out ring creation from context programming
The virtual function driver will use the same transmit and receive
descriptor ring structures, but will not itself construct and program
the ring context. Split out ring creation and destruction from the
programming of the ring context, to allow code to be shared between
physical and virtual function drivers.
Michael Brown [Wed, 24 Apr 2019 15:36:24 +0000 (16:36 +0100)]
[intelxl] Allow for arbitrary placement of ring tail registers
The virtual function transmit and receive ring tail register offsets
do not match those of the physical function. Allow the tail register
offsets to be specified separately.
Michael Brown [Wed, 24 Apr 2019 15:25:47 +0000 (16:25 +0100)]
[intelxl] Use 32-byte receive descriptors
The physical function driver does not allow the virtual function to
request the use of 16-byte receive descriptors. Switch to using
32-byte receive descriptors.
Michael Brown [Wed, 24 Apr 2019 11:45:37 +0000 (12:45 +0100)]
[intelxl] Allow admin queues to be reinitialised
A virtual function reset is triggered via an admin queue command and
will reset the admin queue configuration registers. Allow the admin
queues to be reinitialised after such a reset, without requiring the
overhead (and potential failure paths) of freeing and reallocating the
queues.
Michael Brown [Wed, 24 Apr 2019 11:18:12 +0000 (12:18 +0100)]
[intelxl] Use one admin queue buffer per admin queue descriptor
We currently use a single data buffer shared between all admin queue
descriptors. This works for the physical function driver since we
have at most one command in progress and only a single event (which
does not use a data buffer).
The communication path between the physical and virtual function
drivers uses the event data buffer, and there is no way to prevent a
solicited event (i.e. a response to a request) from being overwritten
by an unsolicited event (e.g. a link status change).
Provide individual data buffers for each admin event queue descriptor
(and for each admin command queue descriptor, for the sake of
consistency).
Michael Brown [Sat, 27 Apr 2019 19:21:22 +0000 (20:21 +0100)]
[intelxl] Use VLAN tag in receive descriptor if present
The physical function driver does not allow the virtual function to
request that VLAN tags are left unstripped. Extract and use the VLAN
tag from the receive descriptor if present.
Michael Brown [Sat, 27 Apr 2019 19:12:01 +0000 (20:12 +0100)]
[vlan] Provide vlan_netdev_rx() and vlan_netdev_rx_err()
The Hermon driver uses vlan_find() to identify the appropriate VLAN
device for packets that are received with the VLAN tag already
stripped out by the hardware. Generalise this capability and expose
it for use by other network card drivers.
Michael Brown [Mon, 22 Apr 2019 13:43:23 +0000 (14:43 +0100)]
[pci] Add support for PCI MSI-X interrupts
The Intel 40 Gigabit Ethernet virtual functions support only MSI-X
interrupts, and will write back completed interrupt descriptors only
when the device attempts to raise an interrupt (or when a complete
cacheline of receive descriptors has been completed).
We cannot actually use MSI-X interrupts within iPXE, since we never
have ownership of the APIC. However, an MSI-X interrupt is
fundamentally just a DMA write of a single dword to an arbitrary
address. We can therefore configure the device to "raise" an
interrupt by writing a meaningless value to an otherwise unused memory
location: this is sufficient to trigger the receive descriptor
writeback logic.
Michael Brown [Sun, 10 Mar 2019 17:58:56 +0000 (17:58 +0000)]
[ocsp] Accept response certID with missing hashAlgorithm parameters
One of the design goals of ASN.1 DER is to provide a canonical
serialization of a data structure, thereby allowing for equality of
values to be tested by simply comparing the serialized bytes.
Some OCSP servers will modify the request certID to omit the optional
(and null) "parameters" portion of the hashAlgorithm. This is
arguably legal but breaks the ability to perform a straightforward
bitwise comparison on the entire certID field between request and
response.
Fix by comparing the OID-identified hashAlgorithm separately from the
remaining certID fields.
Originally-fixed-by: Thilo Fromm <Thilo@kinvolk.io> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Sun, 10 Mar 2019 17:29:06 +0000 (17:29 +0000)]
[tcp] Display "connecting" status until connection is established
Provide increased visibility into the progress of TCP connections by
displaying an explicit "connecting" status message while waiting for
the TCP handshake to complete.
Michael Brown [Thu, 7 Mar 2019 15:23:19 +0000 (15:23 +0000)]
[tls] Display cross-certificate and OCSP status messages
TLS connections will almost always create background connections to
perform cross-signed certificate downloads and OCSP checks. There is
currently no direct visibility into which checks are taking place,
which makes troubleshooting difficult in the absence of either a
packet capture or a debug build.
Use the job progress message buffer to report the current cross-signed
certificate download or OCSP status check, where applicable.
Michael Brown [Thu, 21 Feb 2019 11:32:25 +0000 (11:32 +0000)]
[tls] Support stateful session resumption
Record the session ID (if any) provided by the server and attempt to
reuse it for any concurrent connections to the same server.
If multiple connections are initiated concurrently (e.g. when using
PeerDist) then defer sending the ClientHello for all but the first
connection, to allow time for the first connection to potentially
obtain a session ID (and thereby speed up the negotiation for all
remaining connections).
Michael Brown [Tue, 19 Feb 2019 18:47:12 +0000 (18:47 +0000)]
[efi] Blacklist the Dell Ip4ConfigDxe driver
On a Dell OptiPlex 7010, calling DisconnectController() on the LOM
device handle will lock up the system. Debugging shows that execution
is trapped in an infinite loop that is somehow trying to reconnect
drivers (without going via ConnectController()).
The problem can be reproduced in the UEFI shell with no iPXE code
present, by using the "disconnect" command. Experimentation shows
that the only fix is to unload (rather than just disconnect) the
"Ip4ConfigDxe" driver.
Add the concept of a blacklist of UEFI drivers that will be
automatically unloaded when iPXE runs as an application, and add the
Dell Ip4ConfigDxe driver to this blacklist.
Petr Borsodi [Wed, 16 Jan 2019 16:37:57 +0000 (17:37 +0100)]
[util] Improve processing of ROM images in Option::ROM
The Option::ROM module now compares the Code Type in the PCIR header
to 0x00 (PC-AT) in order to check the presence of other header types
(PnP, UNDI, iPXE, etc). The validity of these headers are checked not
only by offset, but by range and signature checks also. The image
checksum and initial size also depends on Code Type.
Aaron Young [Wed, 9 Jan 2019 19:35:39 +0000 (11:35 -0800)]
[libc] Fix strcmp()/strncmp() to return proper values
Fix strcmp() and strncmp() to return proper standard positive/negative
values for unequal strings. Current implementation is backwards
(i.e. the functions are returning negative when should be positive and
vice-versa).
Currently all consumers of these functions only check the return value
for ==0 or !=0 and so we can safely change the implementation without
breaking things.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Ignat Korchagin [Fri, 4 Jan 2019 19:20:28 +0000 (19:20 +0000)]
[efi] Fix error handling path in efi_snp_probe
Current (simplified):
1. InstallMultipleProtocolInterfaces
if err goto err_install_protocol_interface;
2. OpenProtocol(efi_nii_protocol_guid)
if err goto err_open_nii;
3. OpenProtocol(efi_nii31_protocol_guid)
if err goto err_open_nii31;
4. efi_child_add
if err goto err_efi_child_add;
...
err_efi_child_add:
CloseProtocol(efi_nii_protocol_guid) <= should be efi_nii31_protocol_guid
err_open_nii: <= should be err_open_nii31
CloseProtocol(efi_nii31_protocol_guid) <= should be efi_nii_protocol_guid
err_open_nii31: <= should be err_open_nii
UninstallMultipleProtocolInterfaces
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Petr Borsodi [Tue, 15 Jan 2019 13:06:19 +0000 (13:06 +0000)]
[pci] Correct invalid base-class/sub-class/prog-if order in PCIR
PCI Configuration Space contains fields prog-if at the offset 0x09,
sub-class at the offset 0x0a and base-class at the offset 0x0b (it
respects little endian). PCIR structure uses these fields in the same
order.
Michael Brown [Tue, 17 Jul 2018 11:01:30 +0000 (12:01 +0100)]
[ethernet] Use standard 1500 byte MTU unless explicitly overridden
Devices that support jumbo frames will currently default to the
largest possible MTU. This assumption is valid for virtual adapters
such as virtio-net, where the MTU must have been configured by a
system administrator, but is unsafe in the general case of a physical
adapter.
Default to the standard Ethernet MTU, unless explicitly overridden
either by the driver or via the ${netX/mtu} setting.
Michael Brown [Sun, 8 Jul 2018 17:12:43 +0000 (18:12 +0100)]
[build] Use positive-form tests when checking for supported warnings
Some versions of gcc seem to silently accept an attempt to disable an
unrecognised warning (e.g. via -Wno-stringop-truncation) but will then
report the unrecognised warning if any other error occurs during the
build, resulting in a potentially misleading error message.
Avoid this potential confusion by using the positive-form tests in
order to determine the workaround CFLAGS.
Roman Kagan [Sat, 9 Jun 2018 14:53:31 +0000 (17:53 +0300)]
[vmbus] Do not expect version in version_response
The definition of version_response channel message in Linux doesn't
include version field, so the upcoming VMBus implementation in QEMU
doesn't set it either. Neither Windows nor Linux had any problem with
this.
The check against this field is redundant because the message is the
response to initiate_contact message containing the specific version
requested, so the response with version_supported=true is unambiguous.
Drop this check and don't rely on the field to be present in the
message.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Roman Kagan [Fri, 1 Jun 2018 06:59:01 +0000 (09:59 +0300)]
[rndis] Register netdev with MAC filled
register_netdev expects ->hw_addr and ->ll_addr to be already filled,
so move it towards the end of register_rndis, after the respective
fields have been successfully queried from the underlying device.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Bruce Rogers [Tue, 24 Apr 2018 14:47:32 +0000 (08:47 -0600)]
[build] Disable gcc stringop-truncation warnings
The gcc 8 compiler introduces a warning for certain string
manipulation functions, flagging usages which _may_ not be intended.
An audit of the iPXE sources indicates all usages of strncat and
strncpy are as intended, so the warnings currently issued are not
helpful, especially if warnings are considered errors.
Fix by detecting gcc's support for -Wno-stringop-truncation and, if
detected, using that option to avoid the warning.
Signed-off-by: Bruce Rogers <brogers@suse.com> Modified-by: Michael Brown <mcb30@ipxe.org> Also-fixed-by: Christian Hesse <list@eworm.de> Also-fixed-by: Roman Kagan <rkagan@virtuozzo.com> Also-fixed-by: Bernhard M. Wiedemann <bwiedemann@suse.de> Also-fixed-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Mon, 14 May 2018 10:16:34 +0000 (11:16 +0100)]
[http] Work around stateful authentication schemes
As pointedly documented in RFC7230 section 2.3, HTTP is a stateless
protocol: each request message can be understood in isolation from any
other requests or responses. Various authentication schemes such as
NTLM break this fundamental property of HTTP and rely on the same TCP
connection being reused.
Work around these broken authentication schemes by ensuring that the
most recently pooled connection is reused for the subsequent
authentication retry.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com> Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown [Thu, 19 Apr 2018 11:38:55 +0000 (12:38 +0100)]
[mii] Separate concepts of MII interface and MII device
We currently have no generic concept of a PHY address, since all
existing implementations simply hardcode the PHY address within the
MII access methods.
A bit-bashing MII interface will need to be provided with an explicit
PHY address in order to generate the correct waveform. Allow for this
by separating out the concept of a MII device (i.e. a specific PHY
address attached to a particular MII interface).
projects / thirdparty / ipxe.git / log
