The config IPQ_APSS_6018 should depend on QCOM_SMEM, to
avoid the following error reported by 'kernel test robot'
loongarch64-linux-ld: drivers/clk/qcom/apss-ipq6018.o: in function `apss_ipq6018_probe':
>> apss-ipq6018.c:(.text+0xd0): undefined reference to `qcom_smem_get_soc_id'
There are two match tables in the driver: one for the clock driver and the
other for the reset driver. The only difference between them is that the
clock driver uses 'data' and does not have 'ralink,rt2880-reset' compatible.
Both just can be merged into a single one just by adding the compatible
'ralink,rt2880-reset' entry to 'mtmips_of_match[]', which will allow it to
be used for 'mtmips_clk_driver' (which doesn't use the data) as well as for
'mtmips_clk_init()' (which doesn't need get called for 'ralink,rt2880-reset').
Doing in this way ensures that 'CONFIG_OF' is not disabled anymore so the
above warning disapears.
AHB memory as MMIO should be mapped with ioremap rather than ioremap_wc,
which should have been used initially just to handle unaligned access as
a workaround.
Fixes: d166a73503ef ("spi: fspi: dynamically alloc AHB memory") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20231010201524.2021340-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
clk-provider.h:269: warning: Function parameter or member 'recalc_rate' not described in 'clk_ops'
clk-provider.h:468: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:468: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:482: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:482: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:687: warning: Function parameter or member 'flags' not described in 'clk_divider'
clk-provider.h:1164: warning: Function parameter or member 'flags' not described in 'clk_fractional_divider'
clk-provider.h:1164: warning: Function parameter or member 'approximation' not described in 'clk_fractional_divider'
clk-provider.h:1213: warning: Function parameter or member 'flags' not described in 'clk_multiplier'
Fixes: 9fba738a53dd ("clk: add duty cycle support") Fixes: b2476490ef11 ("clk: introduce the common clock framework") Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers") Fixes: f5290d8e4f0c ("clk: asm9260: use parent index to link the reference clock") Fixes: 9d9f78ed9af0 ("clk: basic clock hardware types") Fixes: e2d0e90fae82 ("clk: new basic clk type for fractional divider") Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230930221428.18463-1-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the hardware manual for RZ/G2L
(r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate
is as follows:
Fout = ((m + k/65536) * Fin) / (p * 2^s)
and k has values in the range [-32768, 32767]. Dividing k by 65536 with
integer arithmetic gives zero all the time, causing slight differences
b/w what has been set vs. what is displayed. Thus, get rid of this and
decompose the formula before dividing k by 65536.
The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. The
hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that
setting 0 is prohibited. Hence rzg2l_cpg_sd_clk_mux_get_parent() should
just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock
parent index based on the value read.
The SD MUX output (SD0) is further divided by 4 in G2{L,UL}. The
divided clock is SD0_DIV4. SD0_DIV4 is registered with
CLK_SET_RATE_PARENT which means a rate request for it is propagated to
the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently
with the users of SD0.
Add proper locking to avoid concurrent accesses on SD MUX set rate
registers.
The hardware user manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf,
chapter 7.4.7 Procedure for Switching Clocks by the Dynamic Switching
Frequency Selectors) specifies that we need to check CPG_PL2SDHI_DSEL
for SD clock switching status.
The clock dividers might be used with clock stop bit enabled or not.
Current tables only support recommended values from the datasheet. This
might result in warnings like below because no valid clock divider is
found. Resulting in a 0 divider.
There are Renesas ARM Trusted Firmware version out there which e.g.
configure 0x201 (shifted logical right by 2: 0x80) and with this match
the added { STPnHCK | 0, 1 }:
Move the elcdif_pll clock initialization before the lcd_clk, since the
elcdif_clk needs to be initialized ahead of lcd_clk, being its parent.
This change fixes issues with the LCD clocks during suspend/resume.
Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks") Suggested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com> Acked-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-2-69a34bcfcae1@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the i.MX8QXP clock provider is built-in but the MXC_CLK is
built as module, build fails:
aarch64-linux-ld: drivers/clk/imx/clk-imx8-acm.o: in function `imx8_acm_clk_probe':
clk-imx8-acm.c:(.text+0x3d0): undefined reference to `imx_check_clk_hws'
Fix that by selecting MXC_CLK in case of CLK_IMX8QXP.
Fixes: c2cccb6d0b33 ("clk: imx: add imx8qxp clk driver") Closes: https://lore.kernel.org/all/8b77219e-b59e-40f1-96f1-980a0b2debcf@infradead.org/ Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MT6358 and MT6366 PMICs, and likely many others from MediaTek, have
a chip ID register, making the chip semi-discoverable.
The driver currently supports two PMICs and expects to be probed on one
or the other. It does not account for incorrect mfd driver entries or
device trees. While these should not happen, if they do, it could be
catastrophic for the device. The driver should be sure the hardware is
what it expects.
Make the driver fail to probe if the chip ID presented is not a known
one.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: f0e3c6261af1 ("regulator: mt6366: Add support for MT6366 regulator") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230913082919.1631287-2-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the
HW_CTRL flag (it's separate from hw_ctrl_addr). In addition to that,
it should feature a cxc entry for bimc_smmu_axi_clk and be marked as
votable.
If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.
Fixes: bcd61c0f535a ("clk: qcom: Add support for root clock generators (RCGs)") Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
Fixes: dc4dc3605639 ("spi: tegra: add spi driver for SLINK controller") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Link: https://lore.kernel.org/r/tencent_73FCC06A3D1C14EE5175253C6FB46A07B709@qq.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ff672b9ffeb3 ("ipvlan: properly track tx_errors") Signed-off-by: Sasha Levin <sashal@kernel.org>
value changed: 0x000000000045c334 -> 0x000000000045c376
Fixes: 3fa2a1df9094 ("virtio-net: per cpu 64 bit stats (v2)") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Currently the socket level counter aggregating the received data
does not take in account the data received via fastopen.
Address the issue updating the counter as required.
Fixes: 38967f424b5b ("mptcp: track some aggregate data counters") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-2-9dc60939d371@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
snprintf() does not return negative values on error.
To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.
Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.
This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.
If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.
Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.
When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by: Sasha Levin <sashal@kernel.org>
If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.
During the D3 resume flow, all new rekeys are passed from the FW.
Because the FW supports only one IGTK at a time, every IGTK rekey
update should be done by removing the last IGTK. The mvmvif holds a
pointer to the last IGTK for that reason and thus should be updated
when a new IGTK is passed upon resume.
Fixes: 04f78e242fff ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow") Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.8ceaf7e5ece7.Ief444f6a2703ed76648b4d414f12bb4130bab36e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we want to synchronize the NAPI, which was added in
commit 5af2bb3168db ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.
EHT devices can support 512 MPDUs in an A-MPDU, each of
which might be an A-MSDU and thus further contain multiple
MSDUs, which need their own buffer each. Increase the number
of buffers to avoid running out in high-throughput scenarios.
When we remove TDLS stations, we need to remove them from FW
immediately, even while associated. Some previous refactoring
here lost the sta ID condition, add it back.
When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.
Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.
This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.
It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.
Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.
When an IGTK is installed for an AP interface, there is no station
associated with it. However, the MFP flag must be set for the installed
key as otherwise the FW wouldn't use it.
Fix the security key flag to set the MFP flag also when the AP is
an AP interface and the key index matches that of an IGTK.
In case the link puncturing is changed such that the channel
is no longer punctured, configure the FW correctly indicating
the EHT parameters changed (with a 0 punctured map).
Allow EHT parameters configuration only when the link really
supports EHT.
When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.
We don't (yet) send the IGTK down to the firmware, but when
we do it needs to be with the broadcast station ID, not the
multicast station ID. Same for the BIGTK, which we may send
already if firmware advertises it (but it doesn't yet.)
The management frames protection flag is always set when the station
is not yet authorized. However, it was not cleared after association
even if the association did not use MFP. As a result, all public
action frames are not parsed by fw (which will cause FTM to fail,
for example). Update the station MFP flag after the station is
authorized.
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When searching for the trip points that need to be set, the nearest
higher trip point's temperature is used for the high trip, while the
nearest lower trip point's temperature minus the hysteresis is used for
the low trip. The issue with this logic is that when the current
temperature is inside a trip point's hysteresis range, both high and low
trips will come from the same trip point. As a consequence instability
can still occur like this:
* the temperature rises slightly and enters the hysteresis range of a
trip point
* polling happens and updates the trip points to the hysteresis range
* the temperature falls slightly, exiting the hysteresis range, crossing
the trip point and triggering an IRQ, the trip points are updated
* repeat
So even though the current hysteresis implementation prevents
instability from happening due to IRQs triggering on the same
temperature value, both ways, it doesn't prevent it from happening due
to an IRQ on one way and polling on the other.
To properly implement a hysteresis behavior, when inside the hysteresis
range, don't update the trip points. This way, the previously set trip
points will stay in effect, which will in a way remember the previous
state (if the temperature signal came from above or below the range) and
therefore have the right trip point already set.
The exception is if there was no previous trip point set, in which case
a previous state doesn't exist, and so it's sensible to allow the
hysteresis range as trip points.
The following logs show the current behavior when running on a real
machine:
[ 202.524658] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000
203.562817: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37979
[ 203.562845] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000
204.176059: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37979 temp=40028
[ 204.176089] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
205.226813: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40028 temp=38652
[ 205.226842] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000
And with this patch applied:
[ 184.933415] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000
185.981182: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37872
186.744685: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37872 temp=40058
[ 186.744716] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000
187.773284: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40058 temp=38698
Fixes: 060c034a9741 ("thermal: Add support for hardware-tracked trip points") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds a test case to reproduce the SCTP DATA chunk retransmission
timeout issue caused by the improper SCTP collision processing in netfilter
nf_conntrack_proto_sctp.
In this test, client sends a INIT chunk, but the INIT_ACK replied from
server is delayed until the server sends a INIT chunk to start a new
connection from its side. After the connection is complete from server
side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp.
The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead
of updating the vtag with the out-of-date init_tag, otherwise, the vtag
in DATA chunks later sent by client don't match the vtag in the conntrack
entry and the DATA chunks get dropped.
When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:
This issue can be reproduced by executing a straightforward program, as
demonstrated below:
SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
struct cgroup *cgrp = NULL;
struct task_struct *task;
int ret = 0;
if (cmd != BPF_LINK_CREATE)
return 0;
// The cgroup2 should be mounted first
cgrp = bpf_cgroup_from_id(1);
if (!cgrp)
goto out;
task = bpf_get_current_task_btf();
if (bpf_task_under_cgroup(task, cgrp))
ret = -1;
bpf_cgroup_release(cgrp);
out:
return ret;
}
After running the program, if you subsequently execute another BPF program,
you will encounter the warning.
It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.
Fix the probe function to call mtk_thermal_release_periodic_ts for
everything != MTK_THERMAL_V1. This was accidentally changed from V1
to V2 in the original patch.
Reported-by: Frank Wunderlich <frank-w@public-files.de> Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/ Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/ Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX. If it's too high then these sprintf()s will overflow.
Fixes: 203d3d4aa482 ("the generic thermal sysfs driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When frames are sent over the air, the device always applies the data
rates in descending order. The driver assumed Minstrel also provided
rate in descending order.
However, in some cases, Minstrel can a choose a fallback rate greater
than the primary rate. In this case, the two rates was inverted, the
device try highest rate first and we get many retries.
Since the device always applies rates in descending order, the
workaround is to drop the rate when it higher than its predecessor in
the rate list. Thus [ 4, 5, 3 ] becomes [ 4, 3 ].
This patch has been tested in isolated room with a series of
attenuators. Here are the Minstrel statistics with 80dBm of attenuation:
As a matter of fact the regmap_pmu already is mandatory because
it is used unconditionally in the driver. Bail out gracefully in
probe() rather than crashing later.
If the "struct can_priv::echoo_skb" is accessed out of bounds, this
would cause a kernel crash. Instead, issue a meaningful warning
message and return with an error.
This race condition was discovered while updating the at91_can driver
to use can_bus_off(). The following scenario describes how the
converted at91_can driver would behave.
When a CAN device goes into BUS-OFF state, the driver usually
stops/resets the CAN device and calls can_bus_off().
This function sets the netif carrier to off, and (if configured by
user space) schedules a delayed work that calls can_restart() to
restart the CAN device.
The can_restart() function first checks if the carrier is off and
triggers an error message if the carrier is OK.
Then it calls the driver's do_set_mode() function to restart the
device, then it sets the netif carrier to on. There is a race window
between these two calls.
The at91 CAN controller (observed on the sama5d3, a single core 32 bit
ARM CPU) has a hardware limitation. If the device goes into bus-off
while sending a CAN frame, there is no way to abort the sending of
this frame. After the controller is enabled again, another attempt is
made to send it.
If the bus is still faulty, the device immediately goes back to the
bus-off state. The driver calls can_bus_off(), the netif carrier is
switched off and another can_restart is scheduled. This occurs within
the race window before the original can_restart() handler marks the
netif carrier as OK. This would cause the 2nd can_restart() to be
called with an OK netif carrier, resulting in an error message.
The flow of the 1st can_restart() looks like this:
can_restart()
// bail out if netif_carrier is OK
netif_carrier_ok(dev)
priv->do_set_mode(dev, CAN_MODE_START)
// enable CAN controller
// sama5d3 restarts sending old message
The 2nd can_restart() will be called with an OK netif carrier and the
error message will be printed.
To close the race window, first set the netif carrier to on, then
restart the controller. In case the restart fails with an error code,
roll back the netif carrier to off.
During testing, I triggered a can_restart() with the netif carrier
being OK [1]. The BUG_ON, which checks if the carrier is OK, results
in a fatal kernel crash. This is neither helpful for debugging nor for
a production system.
[1] The root cause is a race condition in can_restart() which will be
fixed in the next patch.
Do not crash the kernel, issue an error message instead, and continue
restarting the CAN device anyway.
Tx power is fetched from firmware's pdev stats. However, during active
CAC, firmware does not fill the current Tx power and sends the max
initialised value filled during firmware init. If host sends this power
to user space, this is wrong since in certain situations, the Tx power
could be greater than the max allowed by the regulatory. Hence, host
should not be fetching the Tx power during an active CAC.
Fix this issue by returning -EAGAIN error so that user space knows that there's
no valid value available.
WARNING: Missing a blank line after declarations
#2233: FILE: drivers/net/can/usb/etas_es58x/es58x_core.c:2233:
+ int ret = es58x_init_netdev(es58x_dev, ch_idx);
+ if (ret) {
Fixes: d8f26fd689dd ("can: etas_es58x: remove es58x_get_product_info()") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230924110914.183898-3-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Following [1], es58x_devlink.c now triggers the following
format-truncation GCC warnings:
drivers/net/can/usb/etas_es58x/es58x_devlink.c: In function ‘es58x_devlink_info_get’:
drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=]
201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:30: note: directive argument in the range [0, 255]
201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~~~~~~~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9
201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
202 | fw_ver->major, fw_ver->minor, fw_ver->revision);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=]
211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:30: note: directive argument in the range [0, 255]
211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~~~~~~~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9
211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
212 | bl_ver->major, bl_ver->minor, bl_ver->revision);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:38: warning: ‘%03u’ directive output may be truncated writing between 3 and 5 bytes into a region of size between 2 and 4 [-Wformat-truncation=]
221 | snprintf(buf, sizeof(buf), "%c%03u/%03u",
| ^~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:30: note: directive argument in the range [0, 65535]
221 | snprintf(buf, sizeof(buf), "%c%03u/%03u",
| ^~~~~~~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:3: note: ‘snprintf’ output between 9 and 13 bytes into a destination of size 9
221 | snprintf(buf, sizeof(buf), "%c%03u/%03u",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
222 | hw_rev->letter, hw_rev->major, hw_rev->minor);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is not an actual bug because the sscanf() parsing makes sure that
the u8 are only two digits long and the u16 only three digits long.
Thus below declaration:
allocates just what is needed to represent either of the versions.
This warning was known but ignored because, at the time of writing,
-Wformat-truncation was not present in the kernel, not even at W=3 [2].
One way to silence this warning is to check the range of all sub
version numbers are valid: [0, 99] for u8 and range [0, 999] for u16.
The module already has a logic which considers that when all the sub
version numbers are zero, the version number is not set. Note that not
having access to the device specification, this was an arbitrary
decision. This logic can thus be removed in favor of global check that
would cover both cases:
- the version number is not set (parsing failed)
- the version number is not valid (paranoiac check to please gcc)
Before starting to parse the product info string, set the version
sub-numbers to the maximum unsigned integer thus violating the
definitions of struct es58x_sw_version or struct es58x_hw_revision.
Then, rework the es58x_sw_version_is_set() and
es58x_hw_revision_is_set() functions: remove the check that the
sub-numbers are non zero and replace it by a check that they fit in
the expected number of digits. This done, rename the functions to
reflect the change and rewrite the documentation. While doing so, also
add a description of the return value.
Finally, the previous version only checked that
&es58x_hw_revision.letter was not the null character. Replace this
check by an alphanumeric character check to make sure that we never
return a special character or a non-printable one and update the
documentation of struct es58x_hw_revision accordingly.
All those extra checks are paranoid but have the merit to silence the
newly introduced W=1 format-truncation warning [1].
[1] commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1") Link: https://git.kernel.org/torvalds/c/6d4ab2e97dcf
[2] https://lore.kernel.org/all/CAMZ6Rq+K+6gbaZ35SOJcR9qQaTJ7KR0jW=XoDKFkobjhj8CHhw@mail.gmail.com/
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/linux-can/20230914-carrousel-wrecker-720a08e173e9-mkl@pengutronix.de/ Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230924110914.183898-2-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Toshiba Portégé R100 has both acpi_video and toshiba_acpi vendor
backlight driver working. But none of them gets activated as it has
a VGA with no kernel driver (Trident CyberBlade XP4m32).
The DMI strings are very generic ("Portable PC") so add a custom
callback function to check for Trident CyberBlade XP4m32 PCI device
before enabling the vendor backlight driver (better than acpi_video
as it has more brightness steps).
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In accordance with ACPI specificication and _DSD data buffer
representation the data there is an array of bytes. Hence,
accessing it with something longer will create a sparse data
which is against of how device property APIs work in general
and also not defined in the ACPI specification (see [1]).
Fix the code to emit an error if non-byte accessor is used to
retrieve _DSD buffer data.
Fixes: 369af6bf2c28 ("ACPI: property: Read buffer properties as integers") Link: https://uefi.org/specs/ACPI/6.5/19_ASL_Reference.html#buffer-declare-buffer-object Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Add missing braces ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'rtl92c_dm_check_edca_turbo()', 'rtl88e_dm_check_edca_turbo()',
and 'rtl8723e_dm_check_edca_turbo()', the DL limit should be set
from the corresponding field of 'rtlpriv->btcoexist' rather than
UL. Compile tested only.
Fixes: 0529c6b81761 ("rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek version") Fixes: c151aed6aa14 ("rtlwifi: rtl8188ee: Update driver to match Realtek release of 06282014") Fixes: beb5bc402043 ("rtlwifi: rtl8192c-common: Convert common dynamic management routines for addition of rtl8192se and rtl8192de") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230928052327.120178-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.
Fixes: 9ad7c049f0f7 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an error occurs and channel_detector_exit() is called, it relies on
entries of the 'detectors' array to be NULL.
Otherwise, it may access to un-initialized memory.
Fix it and initialize the memory, as what was done before the commit in
Fixes.
When the set_chan_info command is set with CH_SWITCH_NORMAL reason,
even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some
unexpected tones, which might confuse DFS CAC tests that there are some
tone leakages. To get rid of these kinds of false alarms, always bypass
DPD calibration when IEEE80211_CONF_IDLE is set.
Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: c685034cabc5 ("wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison") Signed-off-by: Sasha Levin <sashal@kernel.org>
Set correct wcid in txp to let the SDO hw module look into the correct
wtbl, otherwise the tx descriptor may be wrongly fiiled. This patch also
fixed the issue that driver could not correctly report sta statistics,
especially in WDS mode, which misled AQL.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error handling code was added in order to allow tx enqueue to fail after
calling .tx_prepare_skb. Since this can no longer happen, the error handling
code is unused.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: bde2e77f7626 ("wifi: mt76: mt7996: set correct wcid in txp") Signed-off-by: Sasha Levin <sashal@kernel.org>
Before preparing the new beacon, check the queue status, flush out all
previous beacons and buffered multicast packets, then (if necessary)
try to recover more gracefully from a stuck beacon condition by making a
less invasive attempt at getting the MAC un-stuck.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Only trigger PSE reset if PSE was stuck, otherwise it can cause DMA issues.
Trigger the PSE reset while DMA is fully stopped in order to improve
reliabilty.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
