Since Poly1305 requires a nonce per invocation, the Linux kernel
implementations of Poly1305 don't use the crypto API's keying mechanism
and instead expect the key and nonce as the first 32 bytes of the data.
But ->setkey() is still defined as a stub returning an error code. This
prevents Poly1305 from being used through AF_ALG and will also break it
completely once we start enforcing that all crypto API users (not just
AF_ALG) call ->setkey() if present.
Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the cryptd template is used to wrap an unkeyed hash algorithm,
don't install a ->setkey() method to the cryptd instance. This change
is necessary for cryptd to keep working with unkeyed hash algorithms
once we start enforcing that ->setkey() is called when present.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Templates that use an shash spawn can use crypto_shash_alg_has_setkey()
to determine whether the underlying algorithm requires a key or not.
But there was no corresponding function for ahash spawns. Add it.
Note that the new function actually has to support both shash and ahash
algorithms, since the ahash API can be used with either.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
SATA controllers. This commit is a preparation patch for allowing a
different default sata link powermanagement policy for mobile chipsets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their
chipsets. For older models the comment describing which chipset the PCI id
is for, aksi indicates when we're dealing with a mobile SKU. Extend the
comments for recent chipsets to also indicate mobile SKUs.
The information this commit adds comes from Intel's chipset datasheets.
This commit is a preparation patch for allowing a different default
sata link powermanagement policy for mobile chipsets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b7ce40cff0b9 ("kernfs: cache atomic_write_len in
kernfs_open_file") changes type of local variable 'len' from ssize_t
to size_t. This change caused that the *ppos value is updated also
when the previous write callback failed.
Mentioned snippet:
...
len = ops->write(...); <- return value can be negative
...
if (len > 0) <- true here in this case
*ppos += len;
...
Fixes: b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file") Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing
to a 'struct idmap', via the call to request_key_with_auxdata() in
nfs_idmap_request_key().
However it can also be reached via the request_key() system call in
which case 'aux' will be NULL, causing a NULL pointer dereference in
nfs_idmap_prepare_pipe_upcall(), assuming that the key description is
valid enough to get that far.
Fix this by making nfs_idmap_legacy_upcall() negate the key if no
auxdata is provided.
As usual, this bug was found by syzkaller. A simple reproducer using
the command-line keyctl program is:
keyctl request2 id_legacy uid:0 '' @s
Fixes: 57e62324e469 ("NFS: Store the legacy idmapper result in the keyring") Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Trond Myklebust <trondmy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some of the WRITE calls making up an O_DIRECT write syscall fail,
we neglect to commit, even if some of the WRITEs succeed.
We also depend on the commit code to free the reference count on the
nfs_page taken in the "if (request_commit)" case at the end of
nfs_direct_write_completion(). The problem was originally noticed
because ENOSPC's encountered partway through a write would result in a
closed file being sillyrenamed when it should have been unlinked.
Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit list can get very large, and so we need a cond_resched()
in nfs_commit_release_pages() in order to ensure we don't hog the CPU
for excessive periods of time.
Currently when falling back to doing I/O through the MDS (via
pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header
without releasing the reference taken on the dreq
via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init ->
nfs_direct_pgio_init. It then takes another reference on the dreq via
nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and
as a result the requester will become stuck in inode_dio_wait. Once
that happens, other processes accessing the inode will become stuck as
well.
Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean
up correctly by calling hdr->completion_ops->completion() instead of
calling hdr->release() directly.
This can be reproduced (sometimes) by performing "storage failover
takeover" commands on NetApp filer while doing direct I/O from a client.
This can also be reproduced using SystemTap to simulate a failure while
doing direct I/O from a client (from Dave Wysochanski
<dwysocha@redhat.com>):
This fixes a race with idr_alloc where gd->first_minor can be set to the
same value for two simultaneous calls to ubiblock_create. Each instance
calls device_add_disk with the same first_minor. device_add_disk calls
bdi_register_owner which generates several warnings.
WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240
kobject_add_internal+0x1ec/0x2f8
kobject_add_internal failed for 252:2 with -EEXIST, don't try to
register things with the same name in the same directory
However, device_add_disk does not error out when bdi_register_owner
returns an error. Control continues until reaching blk_register_queue.
It then BUGs.
kernel BUG at kernel-source/fs/sysfs/group.c:113!
[<c01e26cc>] (internal_create_group) from [<c01e2950>]
(sysfs_create_group+0x20/0x24)
[<c01e2950>] (sysfs_create_group) from [<c00e3d38>]
(blk_trace_init_sysfs+0x18/0x20)
[<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>]
(blk_register_queue+0xd8/0x154)
[<c02bdfbc>] (blk_register_queue) from [<c02cec84>]
(device_add_disk+0x194/0x44c)
[<c02cec84>] (device_add_disk) from [<c0436ec8>]
(ubiblock_create+0x284/0x2e0)
[<c0436ec8>] (ubiblock_create) from [<c0427bb8>]
(vol_cdev_ioctl+0x450/0x554)
[<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44)
[<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790)
[<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68)
[<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34)
Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor
unique.
Fixes: 2bf50d42f3a4 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by: Bradley Bolen <bradleybolen@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the requested ECC strength does not exactly match the strengths
supported by the ECC engine, the driver is selecting the closest
strength meeting the 'selected_strength > requested_strength'
constraint. Fix the fact that, in this particular case, ecc->strength
value was not updated to match the 'selected_strength'.
For instance, one can encounter this issue when no ECC requirement is
filled in the device tree while the NAND chip minimum requirement is not
a strength/step_size combo natively supported by the ECC engine.
Starting from commit 041e4575f034 ("mtd: nand: handle ECC errors in
OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a
negative error, and the MTD layer expected it.
However, the trend for the NAND layer is now to return an error or a
positive number of bitflips. Deciding which status to return to the user
belongs to the MTD layer.
Commit e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
brought this logic to the mtd_read_oob() function while the return value
coming from nand_do_read_oob() (called by the ->_read_oob() hook) was
left unchanged.
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The map_word_() functions, dating back to linux-2.6.8, try to perform
bitwise operations on a 'map_word' structure. This may have worked
with compilers that were current then (gcc-3.4 or earlier), but end
up being rather inefficient on any version I could try now (gcc-4.4 or
higher). Specifically we hit a problem analyzed in gcc PR81715 where we
fail to reuse the stack space for local variables.
This can be seen immediately in the stack consumption for
cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN)
can be up to 2200 bytes. Changing the inline functions into macros brings
this down to 1280 bytes. Without KASAN, the same problem exists, but
the stack consumption is lower to start with, my patch shrinks it from
920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around
1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word
structures for each call to one of these helpers.
With the latest gcc-8 snapshot, the problem is fixed in upstream gcc,
but nobody uses that yet, so we should still work around it in mainline
kernels and probably backport the workaround to stable kernels as well.
We had a couple of other functions that suffered from the same gcc bug,
and all of those had a simpler workaround involving dummy variables
in the inline function. Unfortunately that did not work here, the
macro hack was the best I could come up with.
It would also be helpful to have someone to a little performance testing
on the patch, to see how much it helps in terms of CPU utilitzation.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the tuner was split from m88rs2000 the attach function is in wrong
place.
Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.
Prevents driver starting up without any tuner connected.
Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
Whenever the sock object is in DCCP_CLOSED state,
dccp_disconnect() must free dccps_hc_tx_ccid and
dccps_hc_rx_ccid and set to NULL.
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When issuing an IPI RT push, where an IPI is sent to each CPU that has more
than one RT task scheduled on it, it references the root domain's rto_mask,
that contains all the CPUs within the root domain that has more than one RT
task in the runable state. The problem is, after the IPIs are initiated, the
rq->lock is released. This means that the root domain that is associated to
the run queue could be freed while the IPIs are going around.
Add a sched_get_rd() and a sched_put_rd() that will increment and decrement
the root domain's ref count respectively. This way when initiating the IPIs,
the scheduler will up the root domain's ref count before releasing the
rq->lock, ensuring that the root domain does not go away until the IPI round
is complete.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the rto_push_irq_work_func() is called, it looks at the RT overloaded
bitmask in the root domain via the runqueue (rq->rd). The problem is that
during CPU up and down, nothing here stops rq->rd from changing between
taking the rq->rd->rto_lock and releasing it. That means the lock that is
released is not the same lock that was taken.
Instead of using this_rq()->rd to get the root domain, as the irq work is
part of the root domain, we can simply get the root domain from the irq work
that is passed to the routine:
Commit 76e0da34c7ce ("usb-gadget/uvc: use per-attribute show and store
methods") caused a stringification of an undefined macro argument "aname",
so three UVC parameters (streaming_interval, streaming_maxpacket and
streaming_maxburst) were named "aname".
Add the definition of "aname" to the main macro and name the filenames as
originaly intended.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple fix for this requires a new pernet variable for struct
nf_queue that indicates when it is safe to use the dynamically
allocated nf_queue state.
As we need a variable anyway make nf_register_queue_handler and
nf_unregister_queue_handler pernet. This allows the existing logic of
when it is safe to use the state from the nfnetlink_queue module to be
reused with no changes except for making it per net.
The syncrhonize_rcu from nf_unregister_queue_handler is moved to a new
function nfnl_queue_net_exit_batch so that the worst case of having a
syncrhonize_rcu in the pernet exit path is not experienced in batch
mode.
Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Tue, 13 Feb 2018 15:45:20 +0000 (16:45 +0100)]
kaiser: fix compile error without vsyscall
Tobias noticed a compile error on 4.4.115, and it's the same on 4.9.80:
arch/x86/mm/kaiser.c: In function ‘kaiser_init’:
arch/x86/mm/kaiser.c:348:8: error: ‘vsyscall_pgprot’ undeclared
(first use in this function)
It seems like his combination of kernel options doesn't work for KAISER.
X86_VSYSCALL_EMULATION is not set on his system, while LEGACY_VSYSCALL
is set to NONE (LEGACY_VSYSCALL_NONE=y). He managed to get things
compiling again, by moving the 'extern unsigned long vsyscall_pgprot'
outside of the preprocessor statement. This works because the optimizer
removes that code (vsyscall_enabled() is always false) - and that's how
it was done in some older backports.
Eric Biggers [Fri, 9 Feb 2018 23:21:31 +0000 (15:21 -0800)]
x86/kaiser: fix build error with KASAN && !FUNCTION_GRAPH_TRACER
This is a build fix for the 4.4 PTI backport. 4.4 kernels do not have
commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") which went into 4.6. Consequently, the
irqentry sections are only created when CONFIG_FUNCTION_GRAPH_TRACER is
enabled, not also when CONFIG_KASAN is enabled. Therefore, fix the
condition for trying to add a user mapping for this section.
This fixes the following build error:
arch/x86/mm/kaiser.c: In function ‘kaiser_init’:
arch/x86/mm/kaiser.c:367:33: error: ‘__irqentry_text_start’ undeclared (first use in this function)
kaiser_add_user_map_ptrs_early(__irqentry_text_start,
[...]
Autonegotiation gives a security settings mismatch error if the SMB
server selects an SMBv3 dialect that isn't SMB3.02. The exact error is
"protocol revalidation - security settings mismatch".
This can be tested using Samba v4.2 or by setting the global Samba
setting max protocol = SMB3_00.
The check that fails in smb3_validate_negotiate is the dialect
verification of the negotiate info response. This is because it tries
to verify against the protocol_id in the global smbdefault_values. The
protocol_id in smbdefault_values is SMB3.02.
In SMB2_negotiate the protocol_id in smbdefault_values isn't updated,
it is global so it probably shouldn't be, but server->dialect is.
This patch changes the check in smb3_validate_negotiate to use
server->dialect instead of server->vals->protocol_id. The patch works
with autonegotiate and when using a specific version in the vers mount
option.
Signed-off-by: Daniel N Pettersson <danielnp@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If cifs_zap_mapping() returned an error, we would return without putting
the xid that we got earlier. Restructure cifs_file_strict_mmap() and
cifs_file_mmap() to be more similar to each other and have a single
point of return that always puts the xid.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doing so is completely void of sense for multiple reasons so prevent
it. Set dis_ucode_ldr to true and thus disable the microcode loader by
default to address xen pv guests which execute the AP path but not the
BSP path.
By having it turned off by default, the APs won't run into the loader
either.
Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the
xen pv one. That one gets the aforementioned "fix".
Also, improve the detection method by caching the final decision whether
to continue loading in dis_ucode_ldr and do it once on the BSP. The APs
then simply test that value.
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jin Qian <jinqian@google.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the 'encrypted' key type it was possible for userspace to provide a
data blob ending with a master key description shorter than expected,
e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a
master key description, validate_master_desc() could read beyond the end
of the buffer. Fix this by using strncmp() instead of memcmp(). [Also
clean up the code to deduplicate some logic.]
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Jin Qian <jinqian@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't stop device before reset owner, this means we could try to
serve any virtqueue kick before reset dev->worker. This will result a
warn since the work was pending at llist during owner resetting. Fix
this by stopping device during owner reset.
Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
socket can be disconnected and gets transformed back to a listening
socket, if sk_frag.page is not released, which will be cloned into
a new socket by sk_clone_lock, but the reference count of this page
is increased, lead to a use after free or double free issue
Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver
waiting until timeout.
Fix this by waiting for the right register bit.
Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following soft lockup was caught. This is a deadlock caused by
recusive locking.
Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in
qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin
lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable
bh..
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we dump the ip6mr mfc entries via proc, we initialize an iterator
with the table to dump but we don't clear the cache pointer which might
be initialized from a prior read on the same descriptor that ended. This
can result in lock imbalance (an unnecessary unlock) leading to other
crashes and hangs. Clear the cache pointer like ipmr does to fix the issue.
Thanks for the reliable reproducer.
Here's syzbot's trace:
WARNING: bad unlock balance detected!
4.15.0-rc3+ #128 Not tainted
syzkaller971460/3195 is trying to release lock (mrt_lock) at:
[<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syzkaller971460/3195:
#0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0
fs/seq_file.c:165
Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Despite the absurdity of it backing up and restoring the stack pointer
for no reason, the bug is actually the fact that it's only backing up
and restoring the lower 32 bits of the stack pointer. The upper 32 bits
are getting cleared out, corrupting the stack pointer.
So change the '__asm_call_sp' register variable to be associated with
the actual full-size stack pointer.
This also requires changing the __ASM_SEL() macro to be based on the
actual compiled arch size, rather than the CONFIG value, because
CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso).
Otherwise Clang fails to build the kernel because it complains about the
use of a 64-bit register (RSP) in a 32-bit file.
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
When implementing support for interlaced modes, the driver switched from
reporting vblank events on the vertical blanking (VBK) interrupt to the
frame end interrupt (FRM). This incorrectly divided the reported refresh
rate by two. Fix it by moving back to the VBK interrupt.
commit 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on
Parent SSI") fixed Parent SSI duplicate free_irq().
But on Renesas Sound, not only Parent SSI but also Multi SSI
have same issue.
This patch avoid duplicate free_irq() if it was not pure SSI.
Fixes: 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If SSI uses shared pin, some SSI will be used as parent SSI.
Then, normal SSI's remove and Parent SSI's remove
(these are same SSI) will be called when unbind or remove timing.
In this case, free_irq() will be called twice.
This patch solve this issue.
In case cpu could not be found the error message would always refer to
/codec/ not being found in DT. Fix this by catching the cpu node not found
case explicitly.
Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ctx->drvflags is checked in the if clause before beeing initialized.
Move initialization before first usage.
Note, that the if clause was backported with commit 75f82a703b30
("cdc_ncm: Set NTB format again after altsetting switch for Huawei
devices") from mainline (upstream commit 2b02c20ce0c2 ("cdc_ncm: Set NTB
format again after altsetting switch for Huawei devices"). In mainline,
the initialization is at the right place before the if clause.
[mrkiko.rs@gmail.com: commit message tweaks]
Fixes: 75f82a703b30 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Signed-off-by: Matthias Hintzmann <matthias.dev@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Mon, 5 Feb 2018 17:45:56 +0000 (10:45 -0700)]
usbip: fix 3eee23c3ec14 tcp_socket address still in the status file
Commit 3eee23c3ec14 ("usbip: prevent vhci_hcd driver from leaking a
socket pointer address") backported the following commit from mailine.
However, backport error caused the tcp_socket address to still leak.
commit 2f2d0088eb93 ("usbip: prevent vhci_hcd driver from leaking a
socket pointer address")
When a client has a USB device attached over IP, the vhci_hcd driver is
locally leaking a socket pointer address via the
/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug
output when "usbip --debug port" is run.
Fix it to not leak. The socket pointer address is not used at the moment
and it was made visible as a convenient way to find IP address from
socket pointer address by looking up /proc/net/{tcp,tcp6}.
As this opens a security hole, the fix replaces socket pointer address
with sockfd.
vhci_hcd clears all the bits port_status bits instead of clearing
just the USB_PORT_STAT_POWER bit when it handles ClearPortFeature:
USB_PORT_FEAT_POWER. This causes vhci_hcd attach to fail in a bad
state, leaving device unusable by the client. The device is still
attached and however client can't use it.
The problem was fixed as part of larger change to add USB3 Super Speed
support.
This patch isolates the one line fix to clear the USB_PORT_STAT_POWER
from the original patch.
The recent commit 87590ce6e373 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:
/sys/devices/system/cpu/vulnerabilities/meltdown
This commit wires up that file for 64-bit Book3S powerpc.
For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New device-tree properties are available which tell the hypervisor
settings related to the RFI flush. Use them to determine the
appropriate flush instruction to use, and whether the flush is
required.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new hypervisor call is available which tells the guest settings
related to the RFI flush. Use it to query the appropriate flush
instruction(s), and whether the flush is required.
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because there may be some performance overhead of the RFI flush, add
kernel command line options to disable it.
We add a sensibly named 'no_rfi_flush' option, but we also hijack the
x86 option 'nopti'. The RFI flush is not the same as KPTI, but if we
see 'nopti' we can guess that the user is trying to avoid any overhead
of Meltdown mitigations, and it means we don't have to educate every
one about a different command line option.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some CPUs we can prevent the Meltdown vulnerability by flushing the
L1-D cache on exit from kernel to user mode, and from hypervisor to
guest.
This is known to be the case on at least Power7, Power8 and Power9. At
this time we do not know the status of the vulnerability on other CPUs
such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale
CPUs. As more information comes to light we can enable this, or other
mechanisms on those CPUs.
The vulnerability occurs when the load of an architecturally
inaccessible memory region (eg. userspace load of kernel memory) is
speculatively executed to the point where its result can influence the
address of a subsequent speculatively executed load.
In order for that to happen, the first load must hit in the L1,
because before the load is sent to the L2 the permission check is
performed. Therefore if no kernel addresses hit in the L1 the
vulnerability can not occur. We can ensure that is the case by
flushing the L1 whenever we return to userspace. Similarly for
hypervisor vs guest.
In order to flush the L1-D cache on exit, we add a section of nops at
each (h)rfi location that returns to a lower privileged context, and
patch that with some sequence. Newer firmwares are able to advertise
to us that there is a special nop instruction that flushes the L1-D.
If we do not see that advertised, we fall back to doing a displacement
flush in software.
For guest kernels we support migration between some CPU versions, and
different CPUs may use different flush instructions. So that we are
prepared to migrate to a machine with a different flush instruction
activated, we may have to patch more than one flush instruction at
boot if the hypervisor tells us to.
In the end this patch is mostly the work of Nicholas Piggin and
Michael Ellerman. However a cast of thousands contributed to analysis
of the issue, earlier versions of the patch, back ports testing etc.
Many thanks to all of them.
Tested-by: Jon Masters <jcm@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir - back ported to stable with changes] Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the SLB miss handler we may be returning to user or kernel. We need
to add a check early on and save the result in the cr4 register, and
then we bifurcate the return path based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Backport to 4.4 based on patch from Balbir] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the syscall exit path we may be returning to user or kernel
context. We already have a test for that, because we conditionally
restore r13. So use that existing test and branch, and bifurcate the
return based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to the syscall return path, in fast_exception_return we may be
returning to user or kernel context. We already have a test for that,
because we conditionally restore r13. So use that existing test and
branch, and bifurcate the return based on that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit does simple conversions of rfi/rfid to the new macros that
include the expected destination context. By simple we mean cases
where there is a single well known destination context, and it's
simply a matter of substituting the instruction for the appropriate
macro.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir fixed issues with backporting to stable] Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is
used for switching from the kernel to userspace, and from the
hypervisor to the guest kernel. However it can and is also used for
other transitions, eg. from real mode kernel code to virtual mode
kernel code, and it's not always clear from the code what the
destination context is.
To make it clearer when reading the code, add macros which encode the
expected destination context.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new hypervisor call has been defined to communicate various
characteristics of the CPU to guests. Add definitions for the hcall
number, flags and a wrapper function.
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir fixed conflicts in backport] Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PowerPC64 uses the symbol .TOC. much as other targets use
_GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in
powerpc parlance, the TOC pointer). Global offset tables are generally
local to an executable or shared library, or in the kernel, module. Thus
it does not make sense for a module to resolve a relocation against
.TOC. to the kernel's .TOC. value. A module has its own .TOC., and
indeed the powerpc64 module relocation processing ignores the kernel
value of .TOC. and instead calculates a module-local value.
This patch removes code involved in exporting the kernel .TOC., tweaks
modpost to ignore an undefined .TOC., and the module loader to twiddle
the section symbol so that .TOC. isn't seen as undefined.
Note that if the kernel was compiled with -msingle-pic-base then ELFv2
would not have function global entry code setting up r2. In that case
the module call stubs would need to be modified to set up r2 using the
kernel .TOC. value, requiring some of this code to be reinstated.
mpe: Furthermore a change in binutils master (not yet released) causes
the current way we handle the TOC to no longer work when building with
MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be
loaded due to there being no version found for TOC.
Signed-off-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VSX uses a combination of the old vector registers, the old FP
registers and new "second halves" of the FP registers.
Thus when we need to see the VSX state in the thread struct
(flush_vsx_to_thread()) or when we'll use the VSX in the kernel
(enable_kernel_vsx()) we need to ensure they are all flushed into
the thread struct if either of them is individually enabled.
Unfortunately we only tested if the whole VSX was enabled, not if they
were individually enabled.
Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Backported due to changed context] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does
not include a global entry point. A function's global entry point is
used when the function is called from a different TOC context and in the
kernel this typically means a call from a module into the vmlinux (or
vice-versa).
There are a few exported asm functions declared with _GLOBAL() and
calling them from a module will likely crash the kernel since any TOC
relative load will yield garbage.
flush_icache_range() and flush_dcache_range() are both exported to
modules, and use the TOC, so must use _GLOBAL_TOC().
Fixes: 721aeaa9fdf3 ("powerpc: Build little endian ppc64 kernel with ABIv2") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Classic BPF JIT was never ported completely to work on little endian
powerpc. However, it can be enabled and will crash the system when used.
As such, disable use of BPF JIT on ppc64le.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.
Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.
Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Salyzyn [Thu, 1 Feb 2018 15:37:04 +0000 (07:37 -0800)]
selinux: general protection fault in sock_has_perm
In the absence of commit a4298e4522d6 ("net: add SOCK_RCU_FREE socket
flag") and all the associated infrastructure changes to take advantage
of a RCU grace period before freeing, there is a heightened
possibility that a security check is performed while an ill-timed
setsockopt call races in from user space. It then is prudent to null
check sk_security, and if the case, reject the permissions.
Because of the nature of this problem, hard to duplicate, no clear
path, this patch is a simplified band-aid for stable trees lacking the
infrastructure for the series of commits leading up to providing a
suitable RCU grace period. This adjustment is orthogonal to
infrastructure improvements that may nullify the needed check, but
could be added as good code hygiene in all trees.
Signed-off-by: Mark Salyzyn <salyzyn@android.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: selinux@tycho.nsa.gov Cc: linux-security-module@vger.kernel.org Cc: Eric Paris <eparis@parisplace.org> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we return 1 from our post_reset handler, then our disconnect handler
will be called immediately afterwards. Since pre_reset blocks all scsi
requests our disconnect handler will then hang in the scsi_remove_host
call.
This is esp. bad because our disconnect handler hanging for ever also
stops the USB subsys from enumerating any new USB devices, causes commands
like lsusb to hang, etc.
In practice this happens when unplugging some uas devices because the hub
code may see the device as needing a warm-reset and calls usb_reset_device
before seeing the disconnect. In this case uas_configure_endpoints fails
with -ENODEV. We do not want to print an error for this, so this commit
also silences the shost_printk for -ENODEV.
ENDQUOTE
However, if we do that we better drop any unconditional execution
and report to the SCSI subsystem that we have undergone a reset
but we are not operational now.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upon usb composition switch there is possibility of ep0 file
release happening after gadget driver bind. In case of composition
switch from adb to a non-adb composition gadget will never gets
bound again resulting into failure of usb device enumeration. Fix
this issue by checking FFS_FL_BOUND flag and avoid extra
gadget driver unbind if it is already done as part of composition
switch.
This fixes adb reconnection error reported on Android running
v4.4 and above kernel versions. Verified on Hikey running vanilla
v4.15-rc7 + few out of tree Mali patches.
usbip host binds to devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.
usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)
Unbind followed by bind works, however device is left in a bad state with
accesses via the attached busid result in errors and system hangs during
shutdown.
Fix it to check and bail out if the device is already attached to vhci_hcd.
According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
process_rcvd_data
process_rcvd_status
change_port_settings
send_iosp_ext_cmd
write_cmd_usb
usb_kill_urb --> may sleep
To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.
This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disconnected sometimes the cdc-acm driver logs errors like these:
[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19
Silence these by not logging errors when the result is -ENODEV.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FS040U modem is manufactured by omega, and sold by Fujisoft. This patch
adds ID of the modem to use option1 driver. Interface 3 is used as
qmi_wwan, so the interface is ignored.
When not associated with an AP, wifi device drivers should respond to the
SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the
behavior expected by dhcpcd.
Currently, this driver returns an error code (-1) from the ioctl call,
which causes dhcpcd to assume that the device is not a wireless interface
and therefore it fails to work correctly with it thereafter.
This problem was reported and tested at
https://github.com/lwfinger/rtl8188eu/issues/234.
Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.
Detected by CoverityScan, CID#1222135 ("Dereference before null check")
Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again. We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.
Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:
This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.
Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jan Kara <jack@suse.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
^
cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.
Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
restart_grace() uses hardcoded init_net.
It can cause to "list_add double add" in following scenario:
1) nfsd and lockd was started in several net namespaces
2) nfsd in init_net was stopped (lockd was not stopped because
it have users from another net namespaces)
3) lockd got signal, called restart_grace() -> set_grace_period()
and enabled lock_manager in hardcoded init_net.
4) nfsd in init_net is started again,
its lockd_up() calls set_grace_period() and tries to add
lock_manager into init_net 2nd time.
Jeff Layton suggest:
"Make it safe to call locks_start_grace multiple times on the same
lock_manager. If it's already on the global grace_list, then don't try
to add it again. (But we don't intentionally add twice, so for now we
WARN about that case.)
With this change, we also need to ensure that the nfsd4 lock manager
initializes the list before we call locks_start_grace. While we're at
it, move the rest of the nfsd_net initialization into
nfs4_state_create_net. I see no reason to have it spread over two
functions like it is today."
Suggested patch was updated to generate warning in described situation.
Suggested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
