For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the probe, if an error occurs after the ti_iodelay_pinconf_init_dev()
call, it is likely that ti_iodelay_pinconf_deinit_dev() should be called,
as already done in the remove function.
Also in ti_iodelay_pinconf_init_dev(), if an error occurs after the first
regmap_update_bits() call, it is also likely that the deinit() function
should be called.
The easier way to fix it is to add a devm_add_action_or_reset() at the
rigtht place to have ti_iodelay_pinconf_deinit_dev() called when needed.
Doing so, the .remove() function can be removed, and the associated
platform_set_drvdata() call in the probe as well.
The current implementation accesses the `child` fwnode handle outside of
fwnode_for_each_available_child_node() without incrementing its
refcount. Add the missing call to `fwnode_handle_get(child)`.
The cleanup process where `child` is accessed is not right either
because a single call to `fwnode_handle_put()` is carried out in case of
an error, ignoring unasigned nodes at the point when the error happens.
Keep `child` inside of the first loop, and use the helper pointer that
receives references via `fwnode_handle_get()` to handle the child nodes
within the second loop.
Moreover, the iterated nodes are direct children of the device node,
and the `device_for_each_child_node()` macro accounts for child node
availability. By restricting `child` to live within that loop, the
scoped version of it can be used to simplify the error handling.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node_scoped()` to indicate device's direct
child nodes.
Fix seveal odd-looking places in SM8550's dispcc driver:
- duplicate entries in disp_cc_parent_map_4 and disp_cc_parent_map_5
- using &disp_cc_mdss_dptx0_link_div_clk_src as a source for
disp_cc_mdss_dptx1_usb_router_link_intf_clk
Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically
parented by the hdmiphy clk and it is expected that the DCLK_VOP and
hdmiphy clk rate are kept in sync.
Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used
on RK3328, to make full use of all possible supported display modes.
Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP") Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Initialize workqueue before requesting mailbox channel, otherwise if
mailbox interrupt comes before workqueue ready, the imx_rproc_rx_callback
will trigger issue.
Avoid missing put_quota_format when DQUOT_SUSPENDED is passed to
dquot_load_quota_sb.
Link: https://patch.msgid.link/20240715130534.2112678-2-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Fixes: d44c57663723 ("quota: Remove BUG_ON in dquot_load_quota_sb()") Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: 91e916771de0 ("clk: imx: scu: remove legacy scu clock binding support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-14-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
commit 926bf91248dd
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags") Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fractional part of PLL gets lost after re-enabling the PLL. the
MFN can NOT be automatically loaded when doing frac PLL enable/disable,
So when re-enable PLL, configure mfn explicitly.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll") Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-5-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When some module is disabled by fuse, its PCC PR bit is default 0 and
PCC is not operational. Any write to this PCC will cause SError.
Fixes: b40ba8065347 ("clk: imx: Update the compsite driver to support imx8ulp") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-4-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously we assumed that the root clock slice is enabled
by default when kernel boot up. But the bootloader may disable
the clocks before jump into kernel. The gate ops should be registered
rather than NULL to make sure the disabled clock can be enabled
when kernel boot up. Refine the code to skip disable the clock
if mcore booted.
Fixes: a740d7350ff7 ("clk: imx: imx93: add mcore_booted module paratemter") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-3-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bootloader might disable some CCM ROOT Slices. So if mcore_booted set with
display CCM ROOT disabled by Bootloader, kernel display BLK CTRL driver
imx8m_blk_ctrl_driver_init may hang the system because the BUS clk is
disabled.
Add back gate ops, but with disable doing nothing, then the CCM ROOT
will be enabled when used.
Fixes: bb7e897b002a ("clk: imx8m: check mcore_booted before register clk") Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240607133347.3291040-2-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The clk_set_parent for "enet1_ref_sel" and "enet2_ref_sel" are
incorrect, therefore the original requirements to have "enet_clk_ref" as
output sourced by iMX ENET PLL as a default config is not met.
Only "enet[1,2]_ref_125m" "enet[1,2]_ref_pad" are possible parents for
"enet1_ref_sel" and "enet2_ref_sel".
This was observed as a regression using a custom device tree which was
expecting this default config.
This can be fixed at the device tree level but having a default config
matching the original behavior (before refclock mux) will avoid breaking
existing configs.
The p-core mem events are missed when launching 'perf mem record' on ADL
and RPL.
root@number:~# perf mem record sleep 1
Memory events are enabled on a subset of CPUs: 16-27
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.032 MB perf.data ]
root@number:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
A variable 'record' in the 'struct perf_mem_event' is to indicate
whether a mem event in a mem_events[] should be recorded. The current
code only configure the variable for the first eligible PMU.
It's good enough for a non-hybrid machine or a hybrid machine which has
the same mem_events[].
However, if a different mem_events[] is used for different PMUs on a
hybrid machine, e.g., ADL or RPL, the 'record' for the second PMU never
get a chance to be set.
The mem_events[] of the second PMU are always ignored.
'perf mem' doesn't support the per-PMU configuration now. A per-PMU
mem_events[] 'record' variable doesn't make sense. Make it global.
That could also avoid searching for the per-PMU mem_events[] via
perf_pmu__mem_events_ptr every time.
The current perf_pmu__mem_events_init() only checks the availability of
the mem_events for the first eligible PMU. It works for non-hybrid
machines and hybrid machines that have the same mem_events.
However, it may bring issues if a hybrid machine has a different
mem_events on different PMU, e.g., Alder Lake and Raptor Lake. A
mem-loads-aux event is only required for the p-core. The mem_events on
both e-core and p-core should be checked and marked.
The issue was not found, because it's hidden by another bug, which only
records the mem-events for the e-core. The wrong check for the p-core
events didn't yell.
Fixes: abbdd79b786e036e ("perf mem: Clean up perf_mem_events__name()") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240905170737.4070743-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Switch strtoul to strtoull as an unsigned long in 32-bit build isn't
64-bits.
Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a9941891c1 ("perf dwarf-aux: Handle type transfer for memory access") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240821232628.353177-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The location list will have entries with half-open addressing like
[start, end) which means it doesn't include the end address. So it
should skip entries at the end address and match to the next entry.
An example location list looks like this (from readelf -wo):
It looks like '((int *)(-176(%rbp) + 332) >> 1) - 64' but the current
code thought it's just -176(%rbp) and processed the variable incorrectly.
It should reject such a complex expression if check_allowed_ops()
doesn't like it. :)
Fixes: 932dcc2c39aedf54 ("perf dwarf-aux: Add die_collect_vars()") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240816235840.2754937-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we'll only print metric headers for metric leader in
aggregration mode. This will make `perf iostat` header not shown
since it'll aggregrated globally but don't have metric events:
root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
Performance counter stats for 'system wide':
port
0000:00 0 0 0 0
0000:80 0 0 0 0
[...]
Fix this by excluding the iostat in the check of printing metric
headers. Then we can see the headers:
When perf_time__parse_str() fails in perf_sched__timehist(),
need to free session that was previously created, fix it.
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The capstone devel headers define 'struct bpf_insn' in a way that clashes with
what is in the libbpf devel headers, so we so far need to avoid including both.
This is happening on the tools/build/feature/test-all.c file, where we try
building all the expected set of libraries to be normally available on a
system:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-bpf.c:3,
from test-all.c:150:
/home/acme/git/perf-tools-next/tools/include/uapi/linux/bpf.h:77:8: error: ‘bpf_insn’ defined as wrong kind of tag
77 | struct bpf_insn {
| ^~~~~~~~
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
When doing so there is a trick where we define main to be
main_test_libcapstone, then include the individual
tools/build/feture/test-libcapstone.c capability query test, and then we undef
'main' because we'll do it all over again with the next expected library to
be tested (at this time 'lzma').
To complete this mechanism we need to, in test-all.c 'main' routine, to
call main_test_libcapstone(), which isn't being done, so the effect of
adding references to capstone in test-all.c are not achieved.
The only thing that is happening is that test-all.c is failing to build and thus
all the tests will have to be done individually, which nullifies the test-all.c
single build speedup.
So lets remove references to capstone from test-all.c to see if this makes it
build again so that we get faster builds or go on fixing up whatever is
preventing us to get that benefit.
Nothing: after this fix we get a clean test-all.c build and get the build speedup back:
The processing of leader samples would turn an individual sample with
a group of read values into multiple samples. 'perf inject' would pass
through the additional samples increasing the output data file size:
This behavior is incorrect as in the case above 'perf inject' should
have done nothing. Fix this behavior by disabling separating samples
for a tool that requests it. Only request this for `perf inject` so as
to not affect other perf tools. With the patch and the test above
there are no differences between the orig.txt and new.txt.
Fixes: e4caec0d1af3d608 ("perf evsel: Add PERF_SAMPLE_READ sample related processing") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240729220620.2957754-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bpf_get_stackid() helper returns a signed type to check whether it
failed to get a stacktrace or not. But it saved the result in u32 and
checked if the value is negative.
376 if (needs_callstack) {
377 pelem->stack_id = bpf_get_stackid(ctx, &stacks,
378 BPF_F_FAST_STACK_CMP | stack_skip);
--> 379 if (pelem->stack_id < 0)
./tools/perf/util/bpf_skel/lock_contention.bpf.c:379 contention_begin()
warn: unsigned 'pelem->stack_id' is never less than zero.
Let's change the type to s32 instead.
Fixes: 6d499a6b3d90277d ("perf lock: Print the number of lost entries for BPF") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240812172533.2015291-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The linked commit moved the early return on the first sample to before
the verbose log, so move the log earlier too. Now the first sample is
also logged and not skipped.
Fixes: 2d98dbb4c9c5b09c ("perf scripts python arm-cs-trace-disasm.py: Do not ignore disam first sample") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: coresight@lists.linaro.org Cc: gankulkarni@os.amperecomputing.com Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ruidong Tian <tianruidong@linux.alibaba.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240723132858.12747-1-james.clark@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.
When checking malformed helper function signatures, also take other argument
types into account aside from just ARG_PTR_TO_UNINIT_MEM.
This concerns (formerly) ARG_PTR_TO_{INT,LONG} given uninitialized memory can
be passed there, too.
The func proto sanity check goes back to commit 435faee1aae9 ("bpf, verifier:
add ARG_PTR_TO_RAW_STACK type"), and its purpose was to detect wrong func protos
which had more than just one MEM_UNINIT-tagged type as arguments.
The reason more than one is currently not supported is as we mark stack slots with
STACK_MISC in check_helper_call() in case of raw mode based on meta.access_size to
allow uninitialized stack memory to be passed to helpers when they just write into
the buffer.
Probing for base type as well as MEM_UNINIT tagging ensures that other types do not
get missed (as it used to be the case for ARG_PTR_TO_{INT,LONG}).
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:
The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.
This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.
Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.
Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.
Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.
Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.
Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.
commit 97450eb90965 ("sched/pelt: Remove shift of thermal clock")
removed the decay_shift for hw_pressure. This commit uses the
sched_clock_task() in sched_tick() while it replaces the
sched_clock_task() with rq_clock_pelt() in __update_blocked_others().
This could bring inconsistence. One possible scenario I can think of
is in ___update_load_sum():
u64 delta = now - sa->last_update_time
'now' could be calculated by rq_clock_pelt() from
__update_blocked_others(), and last_update_time was calculated by
rq_clock_task() previously from sched_tick(). Usually the former
chases after the latter, it cause a very large 'delta' and brings
unexpected behavior.
The function nilfs_btree_check_delete(), which checks whether degeneration
to direct mapping occurs before deleting a b-tree entry, causes memory
access outside the block buffer when retrieving the maximum key if the
root node has no entries.
This does not usually happen because b-tree mappings with 0 child nodes
are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen
if the b-tree root node read from a device is configured that way, so fix
this potential issue by adding a check for that case.
Due to the nature of b-trees, nilfs2 itself and admin tools such as
mkfs.nilfs2 will never create an intermediate b-tree node block with 0
child nodes, nor will they delete (key, pointer)-entries that would result
in such a state. However, it is possible that a b-tree node block is
corrupted on the backing device and is read with 0 child nodes.
Because operation is not guaranteed if the number of child nodes is 0 for
intermediate node blocks other than the root node, modify
nilfs_btree_node_broken(), which performs sanity checks when reading a
b-tree node block, so that such cases will be judged as metadata
corruption.
Patch series "nilfs2: fix potential issues with empty b-tree nodes".
This series addresses three potential issues with empty b-tree nodes that
can occur with corrupted filesystem images, including one recently
discovered by syzbot.
This patch (of 3):
If a b-tree is broken on the device, and the b-tree height is greater than
2 (the level of the root node is greater than 1) even if the number of
child nodes of the b-tree root is 0, a NULL pointer dereference occurs in
nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert().
This is because, when the number of child nodes of the b-tree root is 0,
nilfs_btree_do_lookup() does not set the block buffer head in any of
path[x].bp_bh, leaving it as the initial value of NULL, but if the level
of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(),
which accesses the buffer memory of path[x].bp_bh, is called.
Fix this issue by adding a check to nilfs_btree_root_broken(), which
performs sanity checks when reading the root node from the device, to
detect this inconsistency.
Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause
early on.
Problem statement:
Since commit fc137c0ddab2 ("sched/numa: enhance vma scanning logic"), the
Numa vma scan overhead has been reduced a lot. Meanwhile, the reducing of
the vma scan might create less Numa page fault information. The
insufficient information makes it harder for the Numa balancer to make
decision. Later, commit b7a5b537c55c08 ("sched/numa: Complete scanning of
partial VMAs regardless of PID activity") and commit 84db47ca7146d7
("sched/numa: Fix mm numa_scan_seq based unconditional scan") are found to
bring back part of the performance.
Recently when running SPECcpu omnetpp_r on a 320 CPUs/2 Sockets system, a
long duration of remote Numa node read was observed by PMU events: A few
cores having ~500MB/s remote memory access for ~20 seconds. It causes
high core-to-core variance and performance penalty. After the
investigation, it is found that many vmas are skipped due to the active
PID check. According to the trace events, in most cases,
vma_is_accessed() returns false because the history access info stored in
pids_active array has been cleared.
Proposal:
The main idea is to adjust vma_is_accessed() to let it return true easier.
Thus compare the diff between mm->numa_scan_seq and
vma->numab_state->prev_scan_seq. If the diff has exceeded the threshold,
scan the vma.
This patch especially helps the cases where there are small number of
threads, like the process-based SPECcpu. Without this patch, if the
SPECcpu process access the vma at the beginning, then sleeps for a long
time, the pid_active array will be cleared. A a result, if this process
is woken up again, it never has a chance to set prot_none anymore.
Because only the first 2 times of access is granted for vma scan:
(current->mm->numa_scan_seq) - vma->numab_state->start_scan_seq) < 2 to be
worse, no other threads within the task can help set the prot_none. This
causes information lost.
Raghavendra helped test current patch and got the positive result
on the AMD platform:
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well.
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
Calling ext4_xattr_ibody_find right after reading the inode with
ext4_get_inode_loc will lead to a check of the validity of the xattrs,
avoiding this problem.
Reported-by: syzbot+0c2508114d912a54ee79@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c2508114d912a54ee79 Fixes: e8e948e7802a ("ext4: let ext4_find_entry handle inline data") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Link: https://patch.msgid.link/20240821152324.3621860-5-cascardo@igalia.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of errors when reading an inode from disk or traversing inline
directory entries, return an error-encoded ERR_PTR instead of returning
NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns
such encoded errors.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem") Signed-off-by: Sasha Levin <sashal@kernel.org>
min_clusters is signed integer and will be converted to unsigned
integer when compared with unsigned number stats.free_clusters.
If min_clusters is negative, it will be converted to a huge unsigned
value in which case all groups may not meet the actual desired free
clusters.
Set negative min_clusters to 0 to avoid unexpected behavior.
If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode
bitmap buffer_head was successfully verified, then __ext4_new_inode()
will get a valid inode_bitmap_bh of a corrupted group from
ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release.
Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like
how ext4_free_inode() does to avoid buffer_head leak.
Fixes: 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Link: https://patch.msgid.link/20240820132234.2759926-3-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Release inode_bitmap_bh from ext4_read_inode_bitmap() in
ext4_mark_inode_used() to avoid buffer_head leak.
By the way, remove unneeded goto for invalid ino when inode_bitmap_bh
is NULL.
In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat`
field is directly assigned to a new value without using the appropriate
RCU pointer assignment functions. According to RCU usage rules, this is
illegal and can lead to unpredictable behavior, including data
inconsistencies and impossible-to-diagnose memory corruption issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the assignment is now done using rcu_assign_pointer(),
which ensures that the pointer assignment is done safely, with the
necessary memory barriers and synchronization. This change prevents
potential RCU dereference issues by ensuring that the `cat` field is
safely updated while still adhering to RCU's requirements.
Fixes: 0817534ff9ea ("smackfs: Fix use-after-free in netlbl_catmap_walk()") Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in
ext4_group_info") speed up fstrim by skipping trim trimmed group. We
also has the chance to clear trimmed once there exists some block free
for this group(mount without discard), and the next trim for this group
will work well too.
For mount with discard, we will issue dicard when we free blocks, so
leave trimmed flag keep alive to skip useless trim trigger from
userspace seems reasonable. But for some case like ext4 build on
dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4
maybe unaligned for dm thinpool, and thinpool will just finish this
discard(see process_discard_bio when begein equals to end) without
actually process discard. For this case, trim from userspace can really
help us to free some thinpool block.
So convert to clear trimmed flag for all case no matter mounted with
discard or not.
Fixes: 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
In 2018, a dependency on <linux/crc32poly.h> was added to avoid
duplicating the same constant in multiple files. Two months later it was
found to be a bad idea and the definition of CRC32_POLY_LE macro was moved
into xz_private.h to avoid including <linux/crc32poly.h>.
xz_private.h is a wrong place for it too. Revert back to the upstream
version which has the poly in xz_crc32_init() in xz_crc32.c.
Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h") Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Note this only happens when the very first random data providing
crypto card appears via hot plug in the system AND is in disabled
state ("deconfig"). Then the initial pull of random data fails and
a re-scan of the AP bus is triggered while already in the middle
of an AP bus scan caused by the appearing new hardware.
The fix is relatively simple once the scenario us understood:
The AP bus force rescan function will immediately return if there
is currently an AP bus scan running with the very same thread id.
Fixes: eacf5b3651c5 ("s390/ap: introduce mutex to lock the AP bus scan") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We do an ugly copying of options in bpf_object__open_skeleton() just to
be able to set object name from skeleton's recorded name (while still
allowing user to override it through opts->object_name).
This is not just ugly, but it also is broken due to memcpy() that
doesn't take into account potential skel_opts' and user-provided opts'
sizes differences due to backward and forward compatibility. This leads
to copying over extra bytes and then failing to validate options
properly. It could, technically, lead also to SIGSEGV, if we are unlucky.
So just get rid of that memory copy completely and instead pass
default object name into bpf_object_open() directly, simplifying all
this significantly. The rule now is that obj_name should be non-NULL for
bpf_object_open() when called with in-memory buffer, so validate that
explicitly as well.
We adopt bpf_object__open_mem() to this as well and generate default
name (based on buffer memory address and size) outside of bpf_object_open().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support") Reported-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Daniel Müller <deso@posteo.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240827203721.1145494-1-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch reported the following warning:
./tools/testing/selftests/bpf/testing_helpers.c:455 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 454)
It seems correct,so let's modify it based on it's suggestion.
Actually,commit b23ed4d74c4d ("selftests/bpf: Fix invalid pointer
check in get_xlated_program()") fixed an issue in the test_verifier.c
once,but it was reverted this time.
Let's solve this issue with the minimal changes possible.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/1eb3732f-605a-479d-ba64-cd14250cbf91@stanley.mountain/ Fixes: b4b7a4099b8c ("selftests/bpf: Factor out get_xlated_program() helper") Signed-off-by: Hao Ge <gehao@kylinos.cn> Link: https://lore.kernel.org/r/20240820023622.29190-1-hao.ge@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.
Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.
Simplest reproducer is a program:
r0 = 0
exit
With a single relocation record:
.insn_off = 0, /* patch first instruction */
.type_id = 100500, /* this type id does not exist */
.access_str_off = 6, /* offset of string "0" */
.kind = BPF_CORE_TYPE_ID_LOCAL,
See the link for original reproducer or next commit for a test case.
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Add annotations __arch_x86_64, __arch_arm64, __arch_riscv64
to specify on which architecture the test case should be tested.
Several __arch_* annotations could be specified at once.
When test case is not run on current arch it is marked as skipped.
For example, the following would be tested only on arm64 and riscv64:
Add a macro __xlated("...") for use with test_loader tests.
When such annotations are present for the test case:
- bpf_prog_get_info_by_fd() is used to get BPF program after all
rewrites are applied by verifier.
- the program is disassembled and patterns specified in __xlated are
searched for in the disassembly text.
__xlated matching follows the same mechanics as __msg:
each subsequent pattern is matched from the point where
previous pattern ended.
This allows to write tests like below, where the goal is to verify the
behavior of one of the of the transformations applied by verifier:
Non-functional change: use a separate data structure to represented
expected messages in test_loader.
This would allow to use the same functionality for expected set of
disassembled instructions in the follow-up commit.
Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240722233844.1406874-8-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang") Signed-off-by: Sasha Levin <sashal@kernel.org>
The call stack for validate_case() function looks as follows:
- test_loader__run_subtests()
- process_subtest()
- run_subtest()
- prepare_case(), which does 'tester->next_match_pos = 0';
- validate_case(), which increments tester->next_match_pos.
Hence, each subtest is run with next_match_pos freshly set to zero.
Meaning that there is no need to persist this variable in the
struct test_loader, use local variable instead.
Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240722233844.1406874-7-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add support for __regex and __regex_unpriv macros to check the test
execution output against a regular expression. This is similar to __msg
and __msg_unpriv, however those expect do substring matching.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240617141458.471620-2-cupertino.miranda@oracle.com
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, compiling the bpf programs will result the compilation errors
with the cf-protection option as follows in arm64 and loongarch64 machine
when using gcc 12.3.1 and clang 17.0.6. This commit fixes the compilation
errors by limited the cf-protection option only used in x86 platform.
[root@localhost linux]# make M=samples/bpf
......
CLANG-bpf samples/bpf/xdp2skb_meta_kern.o
error: option 'cf-protection=return' cannot be specified on this target
error: option 'cf-protection=branch' cannot be specified on this target
2 errors generated.
CLANG-bpf samples/bpf/syscall_tp_kern.o
error: option 'cf-protection=return' cannot be specified on this target
error: option 'cf-protection=branch' cannot be specified on this target
2 errors generated.
......
Fixes: 34f6e38f58db ("samples/bpf: fix warning with ignored-attributes") Reported-by: Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Qiang Wang <wangqiang1@kylinos.cn> Link: https://lore.kernel.org/bpf/20240815135524.140675-1-13667453960@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffaeaa ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on") Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
In struct bpf_struct_ops, we have take a pointer to a BTF type name, and
a struct btf_type. This was presumably done for convenience, but can
actually result in subtle and confusing bugs given that BTF data can be
invalidated before a program is loaded. For example, in sched_ext, we
may sometimes resize a data section after a skeleton has been opened,
but before the struct_ops scheduler map has been loaded. This may cause
the BTF data to be realloc'd, which can then cause a UAF when loading
the program because the struct_ops map has pointers directly into the
BTF data.
We're already storing the BTF type_id in struct bpf_struct_ops. Because
type_id is stable, we can therefore just update the places where we were
looking at those pointers to instead do the lookups we need from the
type_id.
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/crypto_sanity.c:10:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from crypto_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile
error against mips64el/musl libc:
In file included from .../prog_tests/ns_current_pid_tgid.c:14:
.../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
cc1: all warnings being treated as errors
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032a4 ("selftests/bpf: Unprivileged tests for test_loader.c") Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point") Fixes: 0905beec9f52 ("selftests/bpf: run flow dissector tests in skb-less mode") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Use pid_t rather than __pid_t when allocating memory for 'worker_pids' in
'struct test_env', as this is its declared type and also avoids compile
errors seen building against musl libc on mipsel64:
test_progs.c:1738:49: error: '__pid_t' undeclared (first use in this function); did you mean 'pid_t'?
1738 | env.worker_pids = calloc(sizeof(__pid_t), env.workers);
| ^~~~~~~
| pid_t
test_progs.c:1738:49: note: each undeclared identifier is reported only once for each function it appears in
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
Actually use previously defined LDFLAGS during build and add support for
LDLIBS to link extra standalone libraries e.g. 'argp' which is not provided
by musl libc.
Make log output incorrectly shows 'test_maps' as the binary name for every
'CLNG-BPF' build step, apparently picking up the last value defined for the
$(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to
fix this confusing output.
Fixes: a5d0c26a2784 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing") Fixes: 89ad7420b25c ("selftests/bpf: Drop the need for LLVM's llc") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240720052535.2185967-1-tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Linking uprobe_multi.c on mips64el fails due to relocation overflows, when
the GOT entries required exceeds the default maximum. Add a specific CFLAGS
(-mxgot) for uprobe_multi.c on MIPS that allows using a larger GOT and
avoids errors such as:
/tmp/ccBTNQzv.o: in function `bench':
uprobe_multi.c:49:(.text+0x1d7720): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08188'
uprobe_multi.c:49:(.text+0x1d7730): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08189'
...
collect2: error: ld returned 1 exit status
24: (b4) w0 = -1 ; R0_w=0xffffffff
; int BPF_PROG(test_int_hook, struct vm_area_struct *vma, @ lsm.c:89
25: (95) exit
At program exit the register R0 has smin=4294967295 smax=4294967295 should have been in [-4095, 0]
It can be seen that instruction "w0 = -1" zero extended -1 to 64-bit
register r0, setting both smin and smax values of r0 to 4294967295.
This resulted in a false reject when r0 was checked with range [-4095, 0].
Given bpf lsm does not return 64-bit values, this patch fixes it by changing
the compare between r0 and return range from 64-bit operation to 32-bit
operation for bpf lsm.
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned.
projects / thirdparty / kernel / stable.git / log
