Samsung S5KJN1 is a 50MP image sensor, it produces Bayer GRBG (2x2)
frames in RAW10 output format, the maximum supported output resolution
is 8160x6144 at 10 frames per second.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5KJN1 image sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After kthread creation during probe sequence, a handful of other
failures could occur. If this were to happen, the kthread is never
explicitly deleted which results in a resource leak. Add explicit cleanup
of this resource.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: platform: mtk-mdp3: add WQ_PERCPU to alloc_workqueue users
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
AV1 specification describes 3 possibles tx modes: 4x4 only, largest and
select. The hardware allows 5 possibles tx modes: 4x4 only, 8x8, 16x16,
32x32 and select. Since the both aren't exactly matching we need to add
a mapping function to set the correct mode on hardware.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If all the fields of the CDEF parameters are zero (which is the default),
then av1_enable_cdef register needs to be unset
(despite the V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF possibly being set).
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com> Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4786 Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: dropped Link tag since it just duplicated the Closes: URL]
Ming Qian [Fri, 5 Dec 2025 01:54:26 +0000 (09:54 +0800)]
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling.
Fixes: cb5dd5a0fa518 ("media: hantro: Introduce G2/HEVC decoder") Cc: stable@vger.kernel.org Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: v4l2-mem2mem: Add a kref to the v4l2_m2m_dev structure
Adding a reference count to the v4l2_m2m_dev structure allow safely
sharing it across multiple hardware nodes. This can be used to prevent
running jobs concurrently on m2m cores that have some internal resource
sharing.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typos in v4l2_m2m_put documentation]
Nicolas Dufresne [Fri, 28 Nov 2025 19:16:16 +0000 (14:16 -0500)]
media: mediatek: vcodec: Don't try to decode 422/444 VP9
This is not supported by the hardware and trying to decode
these leads to LAT timeout errors.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rework how requests are completed in the MediaTek VCodec driver, by
implementing the new manual request completion feature, which allows to
keep a request open while allowing to add new bitstream data.
This is useful in this case, because the hardware has a LAT and a core
decode work, after the LAT decode the bitstream isn't required anymore
so the source buffer can be set done and the request stays open until
the core decode work finishes.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Fri, 28 Nov 2025 19:16:12 +0000 (14:16 -0500)]
media: mc: add manual request completion
By default when the last request object is completed, the whole
request completes as well.
But sometimes you want to delay this completion to an arbitrary point in
time so add a manual complete mode for this.
In req_queue the driver marks the request for manual completion by
calling media_request_mark_manual_completion, and when the driver
wants to manually complete the request it calls
media_request_manual_complete().
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Zilin Guan [Tue, 11 Nov 2025 14:57:06 +0000 (14:57 +0000)]
media: chips-media: wave5: Fix memory leak on codec_info allocation failure
In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released.
Fixes: 9707a6254a8a6 ("media: chips-media: wave5: Add the v4l2 layer") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:49 +0000 (15:25 +0900)]
media: chips-media: wave5: Improve performance of decoder
The current decoding method was to wait until each frame was
decoded after feeding a bitstream. As a result, performance was low
and Wave5 could not achieve max pixel processing rate.
Update driver to use an asynchronous approach for decoding and feeding a
bitstream in order to achieve full capabilities of the device.
WAVE5 supports command-queueing to maximize performance by pipelining
internal commands and by hiding wait cycle taken to receive a command
from Host processor.
Instead of waiting for each command to be executed before sending the
next command, Host processor just places all the commands in the
command-queue and goes on doing other things while the commands in the
queue are processed by VPU.
While Host processor handles its own tasks, it can receive VPU interrupt
request (IRQ).
In this case, host processor can simply exit interrupt service routine
(ISR) without accessing to host interface to read the result of the
command reported by VPU.
After host processor completed its tasks, host processor can read the
command result when host processor needs the reports and does
response processing.
To achieve this goal, the device_run() calls v4l2_m2m_job_finish
so that next command can be sent to VPU continuously, if there is
any result, then irq is triggered and gets decoded frames and returns
them to upper layer.
Theses processes work independently each other without waiting
a decoded frame.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:48 +0000 (15:25 +0900)]
media: chips-media: wave5: Add WARN_ON to check if dec_output_info is NULL
The dec_output_info should not be a null pointer, WARN_ON around it to
indicates a driver issue.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:47 +0000 (15:25 +0900)]
media: chips-media: wave5: Fix Null reference while testing fluster
When multi instances are created/destroyed, many interrupts happens
and structures for decoder are removed.
"struct vpu_instance" this structure is shared for all flow in the decoder,
so if the structure is not protected by lock, Null dereference
could happens sometimes.
IRQ Handler was spilt to two phases and Lock was added as well.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume") Cc: stable@vger.kernel.org Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xulin Sun [Thu, 4 Dec 2025 09:41:53 +0000 (17:41 +0800)]
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9d503201ff94168008b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xulin Sun [Thu, 4 Dec 2025 09:41:52 +0000 (17:41 +0800)]
media: chips-media: wave5: Fix kthread worker destruction in polling mode
Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings
during module removal. Cancel the hrtimer before destroying the kthread
worker to ensure work queues are empty.
In polling mode, the driver uses hrtimer to periodically trigger
wave5_vpu_timer_callback() which queues work via kthread_queue_work().
The kthread_destroy_worker() function validates that both work queues
are empty with WARN_ON(!list_empty(&worker->work_list)) and
WARN_ON(!list_empty(&worker->delayed_work_list)).
The original code called kthread_destroy_worker() before hrtimer_cancel(),
creating a race condition where the timer could fire during worker
destruction and queue new work, triggering the WARN_ON.
This causes the following warning on every module unload in polling mode:
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow!
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Brandon Brnich [Tue, 21 Oct 2025 20:46:18 +0000 (15:46 -0500)]
media: chips-media: wave5: Process ready frames when CMD_STOP sent to Encoder
CMD_STOP being sent to encoder before last job is executed by device_run
can lead to an occasional dropped frame. Ensure that remaining ready
buffers are drained by making a call to v4l2_m2m_try_schedule.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Brandon Brnich [Tue, 21 Oct 2025 20:46:17 +0000 (15:46 -0500)]
media: chips-media: wave5: Fix conditional in start_streaming
When STREAMON(CAP) is called after STREAMON(OUT), the driver was failing to
switch states from VPU_INST_STATE_OPEN to VPU_INST_STATE_INIT_SEQ and
VPU_INST_STATE_PIC_RUN because the capture queue streaming boolean had not
yet been set to true. This led to a hang in the encoder since the state
was stuck in VPU_INST_STATE_OPEN. During the second call to
start_streaming, the sequence initialization and frame buffer allocation
should occur.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Marek Vasut [Fri, 17 Oct 2025 15:58:38 +0000 (17:58 +0200)]
media: imx-jpeg: Add support for descriptor allocation from SRAM
Add support for optional allocation of bitstream descriptors from SRAM
instead of DRAM. In case the encoder/decoder DT node contains 'sram'
property which points to 'mmio-sram', the driver will attempt to use
the SRAM instead of DRAM for descriptor allocation, which might improve
performance.
This also helps on i.MX95 rev.A with sporadic SLOTn_STATUS IMG_RD_ERR
bit 11 being triggered during JPEG encoding, which is caused by a bug
fixed on later SoC revisions. The bug occurs less often when using the
SRAM for descriptor storage, but is not entirely mitigated. The following
pipeline triggers the bug when descriptors get allocated from DRAM, the
pipeline often hangs after a few seconds and the encoder driver indicates
"timeout, cancel it":
Tested-by: Ming Qian <ming.qian@oss.nxp.com> Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Marek Vasut [Fri, 17 Oct 2025 15:58:37 +0000 (17:58 +0200)]
media: dt-bindings: nxp,imx8-jpeg: Document optional SRAM support
Document optional phandle to mmio-sram, which can describe an SRAM
region used for descriptor storage instead of regular DRAM region.
Use of SRAM instead of DRAM for descriptor storage may improve bus
access pattern and performance.
Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 8 Oct 2025 09:01:56 +0000 (17:01 +0800)]
media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 8 Oct 2025 08:55:03 +0000 (16:55 +0800)]
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a comment to the vpu_get_plat_device() documentation to make it
clear that the VPU platform device is returned with an incremented
reference count (which needs to be dropped after use).
Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Qianfeng Rong [Sun, 7 Sep 2025 09:35:57 +0000 (17:35 +0800)]
media: mediatek: vcodec: use = { } instead of memset()
Based on testing and recommendations by David Lechner et al. [1][2],
using = { } to initialize a structure or array is the preferred way
to do this in the kernel.
Converts memset() to = { }, thereby:
- Eliminating the risk of sizeof() mismatches.
- Simplifying the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
UNINIT checker finds some instances of variables that are used
without being initialized, for example using the uninitialized
value enc_result.is_key_frm can result in unpredictable behavior,
so initialize these variables after declaring.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Cc: stable@vger.kernel.org Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Wed, 30 Apr 2025 07:27:50 +0000 (09:27 +0200)]
media: omap3isp: implement enum_fmt_vid_cap/out
Add missing ioctls. This makes v4l2-compliance happier:
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 56595559 (YUYV) for buftype 1 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Media Driver Info:
Driver name : omap3isp
Model : TI OMAP3 ISP
Serial :
Bus info : platform:480bc000.isp
Media version : 6.17.0
Hardware revision: 0x000000f0 (240)
Driver version : 6.17.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
fail: v4l2-test-media.cpp(108): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
fail: v4l2-test-media.cpp(196): checkFunction(ent.function, true)
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(398): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
test MEDIA_IOC_SETUP_LINK: OK
Total for omap3isp device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 0
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Ricardo Ribalda [Wed, 19 Nov 2025 19:37:13 +0000 (19:37 +0000)]
media: uvcvideo: Document how to format GUIDs
Manual formatting the GUIDs can lead to errors, document a
programmatically way to format the GUIDs from lsusb into something that
the driver can use.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Wed, 19 Nov 2025 19:37:10 +0000 (19:37 +0000)]
media: uvcvideo: Remove nodrop parameter
We announced the deprecation intentions one year ago in the commit
commit 40ed9e9b2808 ("media: uvcvideo: Announce the user our deprecation
intentions").
We have not hear any complains, lets remove the nodrop parameter.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In Video4Linux, a negative value in V4L2_CID_ZOOM_CONTINUOUS,
V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED indicates a movement in the
"opposite" direction to the standard direction.
Currently, we were using -UVC_GET_MIN as the negative value, which
resulted in the camera moving in the slowest possible speed.
Quirk the driver to return -UVC_GET_MAX for the affected controls.
Note that the get/set function from the mapping cannot be used for
this, because we need to use the information from GET_MAX for GET_MIN
and hacking uvc_ctrl_populate_cache seems like a worse alternative.
Signed-off-by: John Bauer <johnebgood@securitylive.com> Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Wed, 19 Nov 2025 20:17:36 +0000 (20:17 +0000)]
media: uvcvideo: Fix support for V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX
The VIDIOC_G_EXT_CTRLS with which V4L2_CTRL_WHICH_(MIN|MAX)_VAL can only
work for controls that have previously announced support for it.
This patch fixes the following v4l2-compliance error:
info: checking extended control 'User Controls' (0x00980001)
fail: v4l2-test-controls.cpp(980): ret != EINVAL (got 13)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Fixes: 39d2c891c96e ("media: uvcvideo: support V4L2_CTRL_WHICH_MIN/MAX_VAL") Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The uvcvideo driver uses a uvc_dbg() macro that supports enabling debug
message categories selectively, and prints a KERN_DEBUG message. The
macro is used through the driver, but one direct dev_dbg() call creeped
in. Replace it with uvc_dbg().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:39 +0000 (08:57 +0200)]
media: vb2: drop wait_prepare/finish callbacks
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:37 +0000 (08:57 +0200)]
media: dvb-core: dvb_vb2: drop wait_prepare/finish callbacks
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &ctx->mutex, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:36 +0000 (08:57 +0200)]
media: dvb-core/dmxdev: drop locks around mmap()
vb2 no longer requires locking around mmap since commit f035eb4e976e ("[media] videobuf2: fix lockdep warning").
Since the streaming I/O mode for DVB support is by default off, and
the dvb utilities were never updated with streaming support, and
we never had regression tests for this streaming mode, this was
never noticed before.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:35 +0000 (08:57 +0200)]
media: dvb-core: dmxdevfilter must always flush bufs
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Linus Torvalds [Fri, 12 Dec 2025 17:44:03 +0000 (05:44 +1200)]
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
Linus Torvalds [Fri, 12 Dec 2025 10:04:18 +0000 (22:04 +1200)]
Merge tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
Linus Torvalds [Fri, 12 Dec 2025 10:01:32 +0000 (22:01 +1200)]
Merge tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
Linus Torvalds [Fri, 12 Dec 2025 09:59:19 +0000 (21:59 +1200)]
Merge tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
Linus Torvalds [Fri, 12 Dec 2025 09:52:42 +0000 (21:52 +1200)]
Merge tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
Brendan Jackman [Sun, 7 Dec 2025 03:53:18 +0000 (03:53 +0000)]
bug: Hush suggest-attribute=format for __warn_printf()
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Heiko Carstens [Mon, 8 Dec 2025 20:06:58 +0000 (21:06 +0100)]
bug: Let report_bug_entry() provide the correct bugaddr
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Evan Li [Fri, 12 Dec 2025 08:49:43 +0000 (16:49 +0800)]
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") Reported-by: kitta <kitta@linux.alibaba.com> Co-developed-by: kitta <kitta@linux.alibaba.com> Signed-off-by: Evan Li <evan.li@linux.alibaba.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Linus Torvalds [Thu, 11 Dec 2025 03:13:29 +0000 (12:13 +0900)]
Merge tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Linus Torvalds [Thu, 11 Dec 2025 00:57:08 +0000 (09:57 +0900)]
Merge tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for SPI that came in during the merge window,
nothing too exciting here"
* tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: Fix an error handling path in mchp_corespi_probe()
spi: cadence-qspi: Fix runtime PM imbalance in probe
Linus Torvalds [Thu, 11 Dec 2025 00:54:59 +0000 (09:54 +0900)]
Merge tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
projects / thirdparty / kernel / linux.git / log
