Arnd Bergmann [Wed, 21 May 2025 17:25:07 +0000 (19:25 +0200)]
Merge tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux into soc/drivers
RISC-V SoC for v6.16
Sophgo:
Add support for SG2044 TOP syscon device. The SG2044 TOP
device provide PLL clock function in its area.
Add RTC support for CV1800 series SoC. The device
is called RTC, but contains control registers of other
HW blocks in its address space, most notably of
Power-on-Reset (PoR) module, DW8051 IP (MCU core),
accompanying SRAM, hence putting it in SoC subsystem.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux:
soc: sophgo: cv1800: rtcsys: New driver (handling RTC only)
dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series
soc: sophgo: sg2044: Add support for SG2044 TOP syscon device
Arnd Bergmann [Wed, 21 May 2025 17:23:43 +0000 (19:23 +0200)]
Merge tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Arnd Bergmann [Wed, 21 May 2025 17:04:33 +0000 (19:04 +0200)]
Merge tag 'ti-driver-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.16
- ti_sci: Bug fix in CPU latency conversion from us to ms for TISCI protocol
- k3-socinfo: Add JTAG ID for AM62LX
- Code cleanups: wkup_m3_ipc: Use dev_err_probe, k3-ringacc: use
device_match_of_probe and knav_qmss_queue: drop unnecessary NULL check
* tag 'ti-driver-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Use dev_err_probe
firmware: ti_sci: Convert CPU latency constraint from us to ms
soc: ti: k3-socinfo: Add JTAG ID for AM62LX
soc: ti: knav_qmss_queue: Remove unnecessary NULL check before free_percpu()
soc: ti: k3-ringacc: Use device_match_of_node()
Arnd Bergmann [Wed, 21 May 2025 17:03:42 +0000 (19:03 +0200)]
Merge tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.16
* Add T-HEAD TH1520 and Renesas RZ/V2H(P) USB2PHY reset controller
drivers.
* Add devm_reset_control_array_get_exclusive_released() variant to allow
using the acquire/release hand-off mechanism for exclusive reset
controls bundled into reset control arrays.
* Add Sophgo SG2044 reset controller to device tree bindings.
* tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: sophgo: Add SG2044 bindings.
MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver
reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset
reset: Add devm_reset_control_array_get_exclusive_released()
reset: thead: Add TH1520 reset controller driver
dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller
Melody Olvera [Mon, 12 May 2025 20:54:42 +0000 (13:54 -0700)]
soc: qcom: llcc-qcom: Add support for LLCC V6
Add support for LLCC V6. V6 adds several additional usecase IDs,
rearrages several registers and offsets, and supports slice IDs
over 31, so add a new function for programming LLCC V6.
Arnd Bergmann [Mon, 12 May 2025 11:33:57 +0000 (13:33 +0200)]
Merge branch 'cznic/platform' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into soc/drivers
These are updates from Marek Behún for the cznic platform drivers:
This series adds support for generating ECDSA signatures with hardware
stored private key on Turris Omnia and Turris MOX.
This ability is exposed via the keyctl() syscall.
* 'cznic/platform' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: use ffs() instead of __bf_shf()
firmware: turris-mox-rwtm: fix building without CONFIG_KEYS
platform: cznic: fix function parameter names
firmware: turris-mox-rwtm: Add support for ECDSA signatures with HW private key
firmware: turris-mox-rwtm: Drop ECDSA signatures via debugfs
platform: cznic: turris-omnia-mcu: Add support for digital message signing with HW private key
platform: cznic: Add keyctl helpers for Turris platform
platform: cznic: turris-omnia-mcu: Refactor requesting MCU interrupt
Arnd Bergmann [Mon, 12 May 2025 08:23:48 +0000 (10:23 +0200)]
Merge tag 'omap-for-v6.16/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers
OMAP driver updates for v6.16
* tag 'omap-for-v6.16/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
Revert "bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first"
Arnd Bergmann [Sat, 10 May 2025 09:09:43 +0000 (11:09 +0200)]
Merge tag 'tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
Small TEE updates for v6.16
- Remove an unnecessary NULL check before release_firmware() in the
OP-TEE driver
- Prevent a size wrap in the TEE subsystem. The wrap would have been caught
later in the code so no security consequences.
* tag 'tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: Prevent size calculation wraparound on 32-bit kernels
tee: optee: smc: remove unnecessary NULL check before release_firmware()
The SHM bridge makes the SM7150 devices reset while probing the RMTFS
(in qcom_scm_assign_mem()). Blacklist the SHM Bridge on corresponding
platforms using SoC-level compat string.
The PMIC GLINK driver is currently generating DisplayPort hotplug
notifications whenever something is connected to (or disconnected from)
a port regardless of the type of notification sent by the firmware.
These notifications are forwarded to user space by the DRM subsystem as
connector "change" uevents:
On the Lenovo ThinkPad X13s and T14s, the PMIC GLINK firmware sends two
identical notifications with orientation information when connecting a
charger, each generating a bogus DRM hotplug event. On the X13s, two
such notification are also sent every 90 seconds while a charger remains
connected, which again are forwarded to user space:
Note that the firmware only sends on of these when connecting an
ethernet adapter.
Fix the spurious hotplug events by only forwarding hotplug notifications
for the Type-C DisplayPort service id. This also reduces the number of
uevents from four to two when an actual DisplayPort altmode device is
connected:
mbox_request_channel() returning value was changed in case of error.
It uses returning value of of_parse_phandle_with_args().
It is returning with -ENOENT instead of -ENODEV when no mboxes property
exists.
Fixes: 24fdd5074b20 ("mailbox: use error ret code of of_parse_phandle_with_args()") Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org> # msm8939 Link: https://lore.kernel.org/r/20250421-fix-qcom-smd-v1-2-574d071d3f27@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Arnd Bergmann [Fri, 9 May 2025 21:14:57 +0000 (23:14 +0200)]
Merge tag 'amd-tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
AMD-TEE driver updates for v6.16
- Sort header includes
- Use pr_fmt
* tag 'amd-tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
amdtee: Sort header includes
amdtee: Use pr_fmt for messages
Arnd Bergmann [Fri, 9 May 2025 21:11:48 +0000 (23:11 +0200)]
Merge tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.16
1. Mediatek: Add support for MT6893 MTK SMI.
2. STM32: Add new driver for STM32 Octo Memory Manager (OMM), which
manages muxing between two OSPI busses.
3. Several cleanups and minor improvements (OMAP GPMC, Kconfig entries,
BT1 L2).
* tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: add entry for STM32 OCTO MEMORY MANAGER driver
memory: Add STM32 Octo Memory Manager driver
dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller
bus: firewall: Fix missing static inline annotations for stubs
memory: bt1-l2-ctl: replace scnprintf() with sysfs_emit()
memory: mtk-smi: Add support for Dimensity 1200 MT6893 SMI
dt-bindings: memory: mtk-smi: Add support for MT6893
memory: tegra: Do not enable by default during compile testing
memory: Simplify 'default' choice in Kconfig
memory: omap-gpmc: remove GPIO set() and direction_output() callbacks
memory: omap-gpmc: use the dedicated define for GPIO direction
Arnd Bergmann [Fri, 9 May 2025 21:10:31 +0000 (23:10 +0200)]
Merge tag 'memory-controller-drv-renesas-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Renesas memory controller drivers for v6.16
Improvements and new device support for the Renesas RPC IF memory
controller driver:
1. Minor cleanup and improvements.
2. Refactor the driver to accommodate for newly added Renesas RZ/G3E support:
- Acquire two resets instead of only one,
- Add RZ/G3E xSPI support with different register layout and its own,
new interface for Renesas SPI.
* tag 'memory-controller-drv-renesas-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: renesas-rpc-if: Add missing static keyword
memory: renesas-rpc-if: Add RZ/G3E xSPI support
memory: renesas-rpc-if: Add wrapper functions
memory: renesas-rpc-if: Add regmap to struct rpcif_info
memory: renesas-rpc-if: Use devm_reset_control_array_get_exclusive()
memory: renesas-rpc-if: Move rpc-if reg definitions
dt-bindings: memory: Document RZ/G3E support
memory: renesas-rpc-if: Move rpcif_info definitions near to the user
memory: renesas-rpc-if: Fix RPCIF_DRENR_CDB macro error
Arnd Bergmann [Fri, 9 May 2025 21:08:52 +0000 (23:08 +0200)]
Merge tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Arnd Bergmann [Fri, 9 May 2025 21:08:05 +0000 (23:08 +0200)]
Merge tag 'mtk-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.16
This brings some cleanups to the MediaTek DVFSRC driver, commonizing
the bandwidth constraints platform data, and also adds support for
the DVFSRC hardware found in the MediaTek Dimensity 1200 MT6893 SoC.
* tag 'mtk-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-dvfsrc: remove an unused variable
soc: mediatek: mtk-dvfsrc: Add support for Dimensity 1200 MT6893
soc: mediatek: mtk-dvfsrc: Rename and move bw constraints data
dt-bindings: soc: mediatek: dvfsrc: Add support for MT6893
Arnd Bergmann [Fri, 9 May 2025 21:06:21 +0000 (23:06 +0200)]
Merge tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
* tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
firmware: exynos-acpm: introduce devm_acpm_get_by_node()
firmware: exynos-acpm: populate devices from device tree data
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
firmware: exynos-acpm: fix reading longer results
dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
firmware: exynos-acpm: allow use during system shutdown
firmware: exynos-acpm: use ktime APIs for timeout detection
Arnd Bergmann [Fri, 9 May 2025 21:05:41 +0000 (23:05 +0200)]
Merge tag 'renesas-drivers-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.16
- Enable all Renesas SoCs by default when ARCH_RENESAS is set, which
will allow up to remove all individual Renesas SoC entries from the
various defconfigs,
- Initial support for the Renesas RZ/V2N (R9A09G056) SoC.
* tag 'renesas-drivers-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add config option for RZ/V2N (R9A09G056) SoC
soc: renesas: Kconfig: Enable SoCs by default when ARCH_RENESAS is set
Alexander Stein [Fri, 9 May 2025 09:36:52 +0000 (11:36 +0200)]
soc: ti: wkup_m3_ipc: Use dev_err_probe
During probe the mailbox channel might not yet be available. Use
dev_err_probe to silence this deferred probe error message:
wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517
Johan Hovold [Wed, 26 Mar 2025 12:49:44 +0000 (13:49 +0100)]
soc: qcom: pmic_glink: enable UCSI on sc8280xp
Commit ad3dd9592b2a ("soc: qcom: pmic_glink: disable UCSI on sc8280xp")
disabled UCSI shortly after it had been enabled to fix a regression that
was observed on the Lenovo ThinkPad X13s.
Specifically, disconnecting an external display would trigger a system
error and hypervisor reset but no one cared enough to track down the bug
at the time.
The same issue was recently observed on X Elite machines, and commit f47eba045e6c ("usb: typec: ucsi: Set orientation as none when connector
is unplugged") worked around the underlying issue by setting the
connector orientation to 'none' on disconnect events to avoid having the
PHY driver crash the machine in one orientation.
Enable UCSI support also on sc8280xp now that the DisplayPort disconnect
crashes are gone.
Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250326124944.6338-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Octo Memory Manager driver (OMM) manages:
- the muxing between 2 OSPI busses and 2 output ports.
There are 4 possible muxing configurations:
- direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
output is on port 2
- OSPI1 and OSPI2 are multiplexed over the same output port 1
- swapped mode (no multiplexing), OSPI1 output is on port 2,
OSPI2 output is on port 1
- OSPI1 and OSPI2 are multiplexed over the same output port 2
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
- check firewall access.
dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller
Add bindings for STM32 Octo Memory Manager (OMM) controller.
OMM manages:
- the muxing between 2 OSPI busses and 2 output ports.
There are 4 possible muxing configurations:
- direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
output is on port 2
- OSPI1 and OSPI2 are multiplexed over the same output port 1
- swapped mode (no multiplexing), OSPI1 output is on port 2,
OSPI2 output is on port 1
- OSPI1 and OSPI2 are multiplexed over the same output port 2
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
bus: firewall: Fix missing static inline annotations for stubs
Stubs in the header file for !CONFIG_STM32_FIREWALL case should be both
static and inline, because they do not come with earlier declaration and
should be inlined in every unit including the header.
Salah Triki [Mon, 5 May 2025 21:43:26 +0000 (22:43 +0100)]
memory: bt1-l2-ctl: replace scnprintf() with sysfs_emit()
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
soc: sophgo: cv1800: rtcsys: New driver (handling RTC only)
Add driver for Sophgo CV1800 series SoC RTC subsystem. The RTC module
comprises a 32kHz oscillator, Power-on-Reset (PoR) sub-module, HW state
machine to control chip power-on, power-off and reset. Furthermore, the
8051 subsystem is located within RTCSYS including associated SRAM block.
This patch only populates RTC sub-device.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/r/20250315224921.3627852-3-alexander.sverdlin@gmail.com Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Jingbao Qiu [Sat, 15 Mar 2025 22:49:12 +0000 (23:49 +0100)]
dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series
Add RTC devicetree binding for Sophgo CV1800 series SoC. The device is
called RTC, but contains control registers of other HW blocks in its
address space, most notably of Power-on-Reset (PoR) module, DW8051 IP
(MCU core), accompanying SRAM, hence putting it in SoC subsystem.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/r/20250315224921.3627852-2-alexander.sverdlin@gmail.com Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
firmware: ti_sci: Convert CPU latency constraint from us to ms
Fix CPU resume latency constraint units sent to device manager through the
TI SCI API. The device manager expects CPU resume latency to be in msecs
which is passed in with the TI SCI API [1]. CPU latency constraints are
set in userspace using the PM QoS framework which uses usecs as the unit.
Since PM QoS uses usecs for units and the device manager expects msecs as
the unit, TI SCI needs to convert from usecs to msecs before passing to
device manager.
Johan Hovold [Wed, 30 Apr 2025 13:51:46 +0000 (15:51 +0200)]
firmware: arm_scmi: quirk: Force perf level get fastchannel
The Qualcomm SCP firmware in X1E machines like the Lenovo ThinkPad T14s
does not set the FastChannel supported attribute bit for PERF_LEVEL_GET
but crashes when falling back to regular messaging.
Use the new SCMI quirk framework to force FastChannel initialisation for
this implementation.
Note that we can add an upper bound on the version matching when we
learn which version has a fix (or limit matching using a SoC compatible
string in the unlikely event that always enabling FC causes trouble
somewhere).
Convert an existing quirk in CLOCK_DESCRIBE_RATES parsing to the new quirk
framework. This is a sort of a peculiar quirk since it matches any platform
and any firmware.
firmware: arm_scmi: Add common framework to handle firmware quirks
Add a common framework to describe SCMI quirks and associate them with a
specific platform or a specific set of SCMI firmware versions.
All the matching SCMI quirks will be enabled when the SCMI core stack
probes and after all the needed SCMI firmware versioning information was
retrieved using the base protocol.
Sibi Sankar [Tue, 29 Apr 2025 14:11:06 +0000 (15:11 +0100)]
firmware: arm_scmi: Ensure that the message-id supports fastchannel
Currently the perf and powercap protocol relies on the protocol domain
attributes, which just ensures that one fastchannel per domain, before
instantiating fastchannels for all possible message-ids. Fix this by
ensuring that each message-id supports fastchannel before initialization.
Logs:
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:0] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:1] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:2] - ret:-95. Using regular messaging
CC: stable@vger.kernel.org Reported-by: Johan Hovold <johan+linaro@kernel.org> Closes: https://lore.kernel.org/lkml/ZoQjAWse2YxwyRJv@hovoldconsulting.com/ Fixes: 6f9ea4dabd2d ("firmware: arm_scmi: Generalize the fast channel support") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
[Cristian: Modified the condition checked to establish support or not] Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250429141108.406045-2-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
Enable control of USB2.0 PHY reset and power-down operations, including
assert and deassert functionalities for the PHY.
Leverage device tree (OF) data to support future SoCs with similar USB2PHY
hardware but varying register configurations. Define initialization values
and control register settings to ensure flexibility for upcoming platforms.
Add a device tree binding document for the Renesas RZ/V2H(P) USB2PHY reset
controller. This block manages the reset and power-down of the USB 2.0 PHY,
which is used in both host and function modes.
Add the released variant of devm_reset_control_array_get_exclusive().
Needed by spi-smt32-ospi driver as same reset line is ulso used by
stm32-omm driver.
Triggered by noticing that the pwm-rcar driver isn't covered by the
Renesas maintainer entry, add this driver to it. Instead of adding it
explicitly, just add a file regex for "rcar" (and drop the one entry
that gets redundant by that).
Looking at the output of
$ git ls-files | grep rcar
only shows files related to that architecture, so no X: line is
currently needed.
Add a small SOC bus driver to parse the chip ID and revision made
available on VIA/WonderMedia SoCs via their system configuration
controller's SCC_ID register.
This is intended to select appropriate sets of on-chip device quirks
at runtime, as it has been found that even within the same SoC
version there can be register-incompatible differences, such as
with the SDMMC controller on WM8505 rev. A0-A1 vs. rev. A2.
The list of SoC versions is compiled from various vendor source dumps
and not all of them have corresponding mainline driver support.
Some of them also have been seen with varying on-chip markings while
sharing the same hardware chip ID's (as is the case with e.g. WM8850
vs. WM8950). In such cases the selection of names to use here among
those seen in various source dumps and chip markings was arbitrary.
VIA/WonderMedia SoC's have a chip ID register inside their system
configuration controller space, which can be used to identify
appropriate hardware quirks at runtime. Add binding for it.
Biju Das [Thu, 24 Apr 2025 08:59:54 +0000 (09:59 +0100)]
memory: renesas-rpc-if: Add RZ/G3E xSPI support
Add support for RZ/G3E xSPI. Compared to RPC-IF, it can support writes on
memory-mapped area. Introduce struct rpcif_impl for holding the function
pointers and data to handle the differences between xspi and rpc-if
interface.
tee: Prevent size calculation wraparound on 32-bit kernels
The current code around TEE_IOCTL_PARAM_SIZE() is a bit wrong on
32-bit kernels: Multiplying a user-provided 32-bit value with the
size of a structure can wrap around on such platforms.
Fix it by using saturating arithmetic for the size calculation.
This has no security consequences because, in all users of
TEE_IOCTL_PARAM_SIZE(), the subsequent kcalloc() implicitly checks
for wrapping.
amd-tee inconsistently uses the word amd-tee in error messages.
Add a `pr_fmt()` define and remove the hardcoded use of amd-tee.
Also, remove the unnecessary driver init successful message because
there will be a message if failed and a user can assume it was successful
otherwise.
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
Correct kerneldoc warnings after commit a8dc26a0ec43 ("firmware:
exynos-acpm: introduce devm_acpm_get_by_node()") changed the function
prototype:
exynos-acpm.c:672: warning: Function parameter or struct member 'acpm_np' not described in 'acpm_get_by_node'
exynos-acpm.c:672: warning: expecting prototype for acpm_get_by_phandle(). Prototype was for acpm_get_by_node() instead
While touching the lines, change the name of device_node pointer to
'np' to match convention.
To allow ACPM clients to simply be children of the ACPM node in DT,
they need to be able to get the ACPM handle based on that ACPM node
directly.
Add an API to allow them to do so, devm_acpm_get_by_node().
At the same time, the previous approach of acquiring the ACPM handle
via a DT phandle is now obsolete and we can remove
devm_acpm_get_by_phandle(), which was there to facilitate that. There
are no existing or anticipated upcoming users of that API, because all
clients should be children of the ACPM node going forward.
Note that no DTs have been merged that use the old approach, so doing
this API change in this driver now will not affect any existing DTs or
client drivers.
André Draszik [Wed, 19 Mar 2025 05:38:24 +0000 (05:38 +0000)]
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
This driver emits error messages when client drivers are trying to get
an interface handle to this driver here before this driver has
completed _probe().
Given this driver returns -EPROBE_DEFER in that case, this is not an
error and shouldn't be emitted to the log, similar to how
dev_err_probe() behaves, so just remove them.
This change also allows us to simplify the logic around releasing of
the acpm_np handle.
André Draszik [Wed, 19 Mar 2025 05:38:23 +0000 (05:38 +0000)]
firmware: exynos-acpm: fix reading longer results
ACPM commands that return more than 8 bytes currently don't work
correctly, as this driver ignores any such returned bytes.
This is evident in at least acpm_pmic_bulk_read(), where up to 8
registers can be read back and those 8 register values are placed
starting at &xfer->rxd[8].
The reason is that xfter->rxlen is initialized with the size of a
pointer (8 bytes), rather than the size of the byte array that pointer
points to (16 bytes)
Update the code such that we set the number of bytes expected to be the
size of the rx buffer.
Note1: While different commands have different lengths rx buffers, we
have to specify the same length for all rx buffers since acpm_get_rx()
assumes they're all the same length.
Note2: The different commands also have different lengths tx buffers,
but before switching the code to use the minimum possible length, some
more testing would have to be done to ensure this works correctly in
all situations. It seems wiser to just apply this fix here without
additional logic changes for now.
soc: hisilicon: kunpeng_hccs: Simplify PCC shared memory region handling
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this Kunpeng HCCS driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Huisong Li <lihuisong@huawei.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
gcc-15: get rid of misc extra NUL character padding
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
gcc-15: acpi: sprinkle random '__nonstring' crumbles around
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Merge tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"16 hotfixes. 2 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS"
[ Basic counting skills are clearly not a strictly necessary requirement
for kernel maintainers. - Linus ]
* tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add section for locking of mm's and VMAs
mm: vmscan: fix kswapd exit condition in defrag_mode
mm: vmscan: restore high-cpu watermark safety in kswapd
MAINTAINERS: add Pedro as reviewer to the MEMORY MAPPING section
mm/memory: move sanity checks in do_wp_page() after mapcount vs. refcount stabilization
mm, hugetlb: increment the number of pages to be reset on HVO
writeback: fix false warning in inode_to_wb()
docs: ABI: replace mcroce@microsoft.com with new Meta address
mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable()
MAINTAINERS: add memory advice section
MAINTAINERS: add mmap trace events to MEMORY MAPPING
mm: memcontrol: fix swap counter leak from offline cgroup
MAINTAINERS: add MM subsection for the page allocator
MAINTAINERS: update SLAB ALLOCATOR maintainers
fs/dax: fix folio splitting issue by resetting old folio order + _nr_pages
mm/page_alloc: fix deadlock on cpu_hotplug_lock in __accept_page()
Merge tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Revert the hfs{plus} deprecation warning that's also included in this
pull request. The commit introducing the deprecation warning resides
rather early in this branch. So simply dropping it would've rebased
all other commits which I decided to avoid. Hence the revert in the
same branch
[ Background - the deprecation warning discussion resulted in people
stepping up, and so hfs{plus} will have a maintainer taking care of
it after all.. - Linus ]
- Switch CONFIG_SYSFS_SYCALL default to n and decouple from
CONFIG_EXPERT
- Fix an audit bug caused by changes to our kernel path lookup helpers
this cycle. Audit needs the parent path even if the dentry it tried
to look up is negative
- Ensure that the kernel path lookup helpers leave the passed in path
argument clean when they return an error. This is consistent with all
our other helpers
- Ensure that vfs_getattr_nosec() calls bdev_statx() so the relevant
information is available to kernel consumers as well
- Don't set a timer and call schedule() if the timer will expire
immediately in epoll
- Make netfs lookup tables with __nonstring
* tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "hfs{plus}: add deprecation warning"
fs: move the bdex_statx call to vfs_getattr_nosec
netfs: Mark __nonstring lookup tables
eventpoll: Set epoll timeout if it's in the future
fs: ensure that *path_locked*() helpers leave passed path pristine
fs: add kern_path_locked_negative()
hfs{plus}: add deprecation warning
Kconfig: switch CONFIG_SYSFS_SYCALL default to n
* tag 'i2c-for-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: atr: Fix wrong include
i2c: cros-ec-tunnel: defer probe if parent EC is not present
projects / thirdparty / linux.git / log
