With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: 119aaeed0b67 ("of/irq: Add msi-parent check to of_msi_xlate()") Signed-off-by: Sasha Levin <sashal@kernel.org>
When using page list framebuffer, and using RGB888 format, some
pixels can cross the page boundaries, and this case was not handled,
leading to writing 1 or 2 bytes on the next virtual address.
Add a check and a specific function to handle this case.
Fixes: c9ff2808790f0 ("drm/panic: Add support to scanout buffer as array of pages") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20251009122955.562888-7-jfalempe@redhat.com Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the logo width is bigger than the framebuffer width, and the
height is big enough to hold the logo and the message, it will draw
at x coordinate that are higher than the width, and ends up in a
corrupted image.
sock_{send,recv}msg() internally calls security_socket_{send,recv}msg(),
which does security checks (e.g. SELinux) for socket access against the
current task. However, _sock_xmit() in drivers/block/nbd.c may be called
indirectly from a userspace syscall, where the NBD socket access would
be incorrectly checked against the calling userspace task (which simply
tries to read/write a file that happens to reside on an NBD device).
To fix this, temporarily override creds to kernel ones before calling
the sock_*() functions. This allows the security modules to recognize
this as internal access by the kernel, which will normally be allowed.
A way to trigger the issue is to do the following (on a system with
SELinux set to enforcing):
After these steps, assuming the SELinux policy doesn't allow the
unexpected access pattern, errors will be visible on the kernel console:
[ 142.204243] nbd0: detected capacity change from 0 to 524288
[ 165.189967] md: async del_gendisk mode will be removed in future, please upgrade to mdadm-4.5+
[ 165.252299] md/raid1:md127: active with 1 out of 2 mirrors
[ 165.252725] md127: detected capacity change from 0 to 522240
[ 165.255434] block nbd0: Send control failed (result -13)
[ 165.255718] block nbd0: Request send failed, requeueing
[ 165.256006] block nbd0: Dead connection, failed to find a fallback
[ 165.256041] block nbd0: Receive control failed (result -32)
[ 165.256423] block nbd0: shutting down sockets
[ 165.257196] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.257736] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.258263] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.259376] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.259920] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.260628] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.261661] ldm_validate_partition_table(): Disk read failed.
[ 165.262108] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.262769] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.263697] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.264412] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.265412] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.265872] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.266378] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.267168] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.267564] md127: unable to read partition table
[ 165.269581] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.269960] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.270316] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.270913] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.271253] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.271809] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.272074] ldm_validate_partition_table(): Disk read failed.
[ 165.272360] nbd0: unable to read partition table
[ 165.289004] ldm_validate_partition_table(): Disk read failed.
[ 165.289614] nbd0: unable to read partition table
The corresponding SELinux denial on Fedora/RHEL will look like this
(assuming it's not silenced):
type=AVC msg=audit(1758104872.510:116): avc: denied { write } for pid=1908 comm="mdadm" laddr=::1 lport=32772 faddr=::1 fport=10809 scontext=system_u:system_r:mdadm_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=tcp_socket permissive=0
The issue has started to appear since commit 060406c61c7c ("block: add
plug while submitting IO").
Cc: Ming Lei <ming.lei@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2348878 Fixes: 060406c61c7c ("block: add plug while submitting IO") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The negation operator is incorrectly placed outside the unlikely()
macro:
if (!unlikely(iwa))
This inverts the compiler branch prediction hint, marking the NULL case
as likely instead of unlikely. The intent is to indicate that allocation
failures are rare, consistent with common kernel patterns.
Moving the negation inside unlikely():
if (unlikely(!iwa))
Fixes: 2b4fc4cd43f2 ("io_uring/waitid: setup async data in the prep handler") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Handling of errors when reading status, temperature, and humidity returns
the error number as negative attribute value. Fix it up by returning
the error as return value.
Fixes: a0ac418c6007c ("hwmon: (sht3x) convert some of sysfs interface to hwmon") Cc: JuenKit Yip <JuenKit_Yip@hotmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn> Fixes: 08ebc9def79fc ("hwmon: Add Congatec Board Controller monitoring driver") Reviewed-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20251017063414.1557447-1-liqiang01@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/riscv/kernel/sys_hwprobe.c:50 hwprobe_arch_id() error: uninitialized symbol 'cpu_id'.
This could happen if hwprobe_arch_id() was called with a key ID of
something other than MVENDORID, MIMPID, and MARCHID. This does not
happen in the current codebase. The only caller of hwprobe_arch_id()
is a function that only passes one of those three key IDs.
For the sake of reducing static analyzer warning noise, and in the
unlikely event that hwprobe_arch_id() is someday called with some
other key ID, validate hwprobe_arch_id()'s input to ensure that
'cpu_id' is always initialized before use.
Early boot stages may disable CPU DT nodes for unavailable
CPUs based on SKU, pinstraps, eFuse, etc. Currently, the
riscv_early_of_processor_hartid() prints details of a CPU
if it is disabled in DT which has no value and gives a
false impression to the users that there some issue with
the CPU.
Fixes: e3d794d555cd ("riscv: treat cpu devicetree nodes without status as enabled") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20251014163009.182381-1-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pgprot_dmacoherent() is used when allocating memory for
non-coherent devices and by default pgprot_dmacoherent() is
same as pgprot_noncached() unless architecture overrides it.
Currently, there is no pgprot_dmacoherent() definition for
RISC-V hence non-coherent device memory is being mapped as
IO thereby making CPU access to such memory slow.
Define pgprot_dmacoherent() to be same as pgprot_writecombine()
for RISC-V so that CPU access non-coherent device memory as
NOCACHE which is better than accessing it as IO.
This commit address a kernel panic issue that can happen if Userspace
tries to partially unmap a GPU virtual region (aka drm_gpuva).
The VM_BIND interface allows partial unmapping of a BO.
Panthor driver pre-allocates memory for the new drm_gpuva structures
that would be needed for the map/unmap operation, done using drm_gpuvm
layer. It expected that only one new drm_gpuva would be needed on umap
but a partial unmap can require 2 new drm_gpuva and that's why it
ended up doing a NULL pointer dereference causing a kernel panic.
Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for
phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can
hit WARN_ON() when trying to change owner of a file that isn't visible.
See the trace below:
Booting without this patch and disabled dirmap support results in
[ 2.980719] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986040] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994709] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001075] Creating 2 MTD partitions on "spi0.0":
[ 3.005862] 0x000000000000-0x000000020000 : "bl2"
[ 3.011272] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.195594] ubi0: attaching mtd1
[ 13.338398] ubi0: scanning is finished
[ 13.342188] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 13.349784] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 13.356897] UBI error: cannot attach mtd1
If dirmap is disabled or not supported in the spi driver, the dirmap requests
will be executed via exec_op() handler. Thus, if the hardware supports
dual/quad spi modes, then corresponding requests will be sent to exec_op()
handler. Current driver does not support such requests, so error is arrised.
As result the flash can't be read/write.
This patch adds support of dual and quad wires spi modes to exec_op() handler.
Fixes: a403997c12019 ("spi: airoha: add SPI-NAND Flash controller driver") Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20251012121707.2296160-4-mikhail.kshevetskiy@iopsys.eu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver can accelerate single page operations only, thus
continuous reading mode should not be used.
Continuous reading will use sizes up to the size of one erase block.
This size is much larger than the size of single flash page. Use this
difference to identify continuous reading and return an error.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: a403997c12019 ("spi: airoha: add SPI-NAND Flash controller driver") Link: https://patch.msgid.link/20251012121707.2296160-2-mikhail.kshevetskiy@iopsys.eu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in
scmi_xfer_raw_put() before the transfer completion was properly
acknowledged by the raw message handlers.
Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET
from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain
set throughout the entire raw message processing pipeline until the
transfer is returned to the free pool.
Define the interrupt in the GICv2 for vGIC so KVM
can be used, it was missed from the original upstream
DTB for some reason.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Andrea della Porta <andrea.porta@suse.com> Cc: Phil Elwell <phil@raspberrypi.com> Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5") Link: https://lore.kernel.org/r/20250924085612.1039247-1-pbrobinson@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
bcm2712.dtsi:494.4-497.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map:
Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
In csqspi_probe(), when cqspi_request_mmap_dma() returns -EPROBE_DEFER,
we handle the error by jumping to probe_setup_failed.
In that label, we call pm_runtime_disable(), even if we never called
pm_runtime_enable() before.
Because of this, the driver cannot probe:
[ 2.690018] cadence-qspi 47040000.spi: No Rx DMA available
[ 2.699735] spi-nor spi0.0: resume failed with -13
[ 2.699741] spi-nor: probe of spi0.0 failed with error -13
Only call pm_runtime_disable() if it was enabled by adding a new
label to handle cqspi_request_mmap_dma() failures.
Fixes: b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20251009-cadence-quadspi-fix-pm-runtime-v2-1-8bdfefc43902@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For different sample clock source selection, the max frequency
flexspi supported are different. For mode 0, max frequency is 66MHz.
For mode 3, the max frequency is 166MHz.
Refer to 3.9.9 FlexSPI timing parameters on page 65.
https://www.nxp.com/docs/en/data-sheet/IMX8MNCEC.pdf
Though flexspi maybe still work under higher frequency, but can't
guarantee the stability. IC suggest to add this limitation on all
SoCs which contain flexspi.
Fixes: c07f27032317 ("spi: spi-nxp-fspi: add the support for sample data from DQS pad") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://patch.msgid.link/20250922-fspi-fix-v1-3-ff4315359d31@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to the erratum ERR050272, the DLL lock status register STS2
[xREFLOCK, xSLVLOCK] bit may indicate DLL is locked before DLL is
actually locked. Add an extra 4us delay as a workaround.
refer to ERR050272, on Page 20.
https://www.nxp.com/docs/en/errata/IMX8_1N94W.pdf
Fixes: 99d822b3adc4 ("spi: spi-nxp-fspi: use DLL calibration when clock rate > 100MHz") Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://patch.msgid.link/20250922-fspi-fix-v1-2-ff4315359d31@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current operation contain the max_freq, so new coming operation may use
new clock rate, need to re-config the clock rate to match the requirement.
Fixes: 26851cf65ffc ("spi: nxp-fspi: Support per spi-mem operation frequency switches") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://patch.msgid.link/20250922-fspi-fix-v1-1-ff4315359d31@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
flexspi define four mode for sample clock source selection.
Here is the list of modes:
mode 0: Dummy Read strobe generated by FlexSPI Controller and loopback
internally
mode 1: Dummy Read strobe generated by FlexSPI Controller and loopback
from DQS pad
mode 2: Reserved
mode 3: Flash provided Read strobe and input from DQS pad
In default, flexspi use mode 0 after reset. And for DTR mode, flexspi
only support 8D-8D-8D mode. For 8D-8D-8D mode, IC suggest to use mode 3,
otherwise read always get incorrect data.
For DTR mode, flexspi will automatically div 2 of the root clock
and output to device. the formula is:
device_clock = root_clock / (is_dtr ? 2 : 1)
So correct the clock rate setting for DTR mode to get the max
performance.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-4-bb9fe2a01889@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a89103f67112 ("spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate") Signed-off-by: Sasha Levin <sashal@kernel.org>
FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint
memory access descriptor to allow any sender could to specify an its any
custom value for each receiver. Also this value must be specified by the
receiver when retrieving the memory region. The sender must ensure it
informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism
such as a partition message.
So the FF-A driver can use the message interfaces to communicate the value
and set the same in the ffa_mem_region_attributes structures when using
the memory interfaces.
The driver ensure that the size of the endpoint memory access descriptors
is set correctly based on the FF-A version.
Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver") Reported-by: Lixiang Mao <liximao@qti.qualcomm.com> Tested-by: Lixiang Mao <liximao@qti.qualcomm.com>
Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use DMA-API dma_map_single() call for getting the DMA address of the
transfer buffer instead of hacking with virt_to_phys().
This fixes the following DMA-API debug warning:
------------[ cut here ]------------
DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes]
WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151
Modules linked in: ...
Hardware name: Hardkernel ODROID-M1 (DT)
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : check_sync+0x1d8/0x690
lr : check_sync+0x1d8/0x690
..
Call trace:
check_sync+0x1d8/0x690 (P)
debug_dma_sync_single_for_cpu+0x84/0x8c
__dma_sync_single_for_cpu+0x88/0x234
rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc]
spi_mem_exec_op+0x408/0x498
spi_nor_read_data+0x170/0x184
spi_nor_read_sfdp+0x74/0xe4
spi_nor_parse_sfdp+0x120/0x11f0
spi_nor_sfdp_init_params_deprecated+0x3c/0x8c
spi_nor_scan+0x690/0xf88
spi_nor_probe+0xe4/0x304
spi_mem_probe+0x6c/0xa8
spi_probe+0x94/0xd4
really_probe+0xbc/0x298
...
Fixes: b69386fcbc60 ("spi: rockchip-sfc: Using normal memory for dma") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://patch.msgid.link/20251003114239.431114-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The damon_ctx for testing online DAMON parameters commit inputs is
deallocated only when the test fails. This means memory is leaked for
every successful online DAMON parameters commit. Fix the leak by always
deallocating it.
Link: https://lkml.kernel.org/r/20251003201455.41448-3-sj@kernel.org Fixes: 4c9ea539ad59 ("mm/damon/sysfs: validate user inputs from damon_sysfs_commit_input()") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed.
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks.
Link: https://lkml.kernel.org/r/20251014084225.313313-1-lienze@kylinos.cn Fixes: ab82e57981d0 ("mm/damon/core: introduce damos->ops_filters") Signed-off-by: Enze Li <lienze@kylinos.cn> Reviewed-by: SeongJae Park <sj@kernel.org> Tested-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each damon_ctx maintains callback requests using a linked list
(damon_ctx->call_controls). When a new callback request is received via
damon_call(), the new request should be added to the list. However, the
function is making a mistake at list_add_tail() invocation: putting the
new item to add and the list head to add it before, in the opposite order.
Because of the linked list manipulation implementation, the new request
can still be reached from the context's list head. But the list items
that were added before the new request are dropped from the list.
As a result, the callbacks are unexpectedly not invocated. Worse yet, if
the dropped callback requests were dynamically allocated, the memory is
leaked. Actually DAMON sysfs interface is using a dynamically allocated
repeat-mode callback request for automatic essential stats update. And
because the online DAMON parameters commit is using a non-repeat-mode
callback request, the issue can easily be reproduced, like below.
# damo start --damos_action stat --refresh_stat 1s
# damo tune --damos_action stat --refresh_stat 1s
The first command dynamically allocates the repeat-mode callback request
for automatic essential stat update. Users can see the essential stats
are automatically updated for every second, using the sysfs interface.
The second command calls damon_commit() with a new callback request that
was made for the commit. As a result, the previously added repeat-mode
callback request is dropped from the list. The automatic stats refresh
stops working, and the memory for the repeat-mode callback request is
leaked. It can be confirmed using kmemleak.
When damos_commit_quota_goals() is called for adding new DAMOS quota goals
of DAMOS_QUOTA_USER_INPUT metric, current_value fields of the new goals
should be also set as requested.
However, damos_commit_quota_goals() is not updating the field for the
case, since it is setting only metrics and target values using
damos_new_quota_goal(), and metric-optional union fields using
damos_commit_quota_goal_union(). As a result, users could see the first
current_value parameter that committed online with a new quota goal is
ignored. Users are assumed to commit the current_value for
DAMOS_QUOTA_USER_INPUT quota goals, since it is being used as a feedback.
Hence the real impact would be subtle. That said, this is obviously not
intended behavior.
Fix the issue by using damos_commit_quota_goal() which sets all quota goal
parameters, instead of damos_commit_quota_goal_union(), which sets only
the union fields.
Workqueue allocation can fail, so check the return value of the GGTT
workqueue allocation and fail driver initialization if the allocation
fails.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20251022005538.828980-2-matthew.brost@intel.com
(cherry picked from commit 1f1314e8e71385bae319e43082b798c11f6648bc) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
mistakenly introduced a new behaviour - clearing the VM_ACCOUNT flag of
the old mapping when a mapping is mremap()'d with the MREMAP_DONTUNMAP
flag set.
While we always clear the VM_LOCKED and VM_LOCKONFAULT flags for the old
mapping (the page tables have been moved, so there is no data that could
possibly be locked in memory), there is no reason to touch any other VMA
flags.
This is because after the move the old mapping is in a state as if it were
freshly mapped. This implies that the attributes of the mapping ought to
remain the same, including whether or not the mapping is accounted.
Link: https://lkml.kernel.org/r/20251013165836.273113-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Fixes: b714ccb02a76 ("mm/mremap: complete refactor of move_vma()") Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue.
Link: https://lkml.kernel.org/r/20251015064926.1887643-1-qiuxu.zhuo@intel.com Link: https://lkml.kernel.org/r/20251011075520.320862-1-qiuxu.zhuo@intel.com Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp") Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Reported-by: Farrah Chen <farrah.chen@intel.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Acked-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mariano Pache <npache@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Add a final dma_wmb() barrier before triggering the transmit request
(TCCR_TSRQ) to ensure all descriptor and buffer writes are visible to
the DMA engine.
According to the hardware manual, a read-back operation is required
before writing to the doorbell register to guarantee completion of
previous writes. Instead of performing a dummy read, a dma_wmb() is
used to both enforce the same ordering semantics on the CPU side and
also to ensure completion of writes.
Ensure the TX descriptor type fields are published in a safe order so the
DMA engine never begins processing a descriptor chain before all descriptor
fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last
descriptor and DT_FSTART into the first. The DMA engine begins processing
when it observes DT_FSTART. Move the dma_wmb() barrier so it executes
immediately after DT_FEND and immediately before writing DT_FSTART
(and before DT_FSINGLE in the single-descriptor case). This guarantees
that all prior CPU writes to the descriptor memory are visible to the
device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish
DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to
start on a partially initialised chain and causing corrupted transmissions
or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as
transmit queue timeouts and device resets.
TX frames aren't padded and unknown memory is sent into the ether.
Theoretically, it isn't even guaranteed that the extra memory exists
and can be sent out, which could cause further problems. In practice,
I found that plenty of tailroom exists in the skb itself (in my test
with ping at least) and skb_padto() easily succeeds, so use it here.
In the event of -ENOMEM drop the frame like other drivers do.
The use of one more padding byte instead of a USB zero-length packet
is retained to avoid regression. I have a dodgy Etron xHCI controller
which doesn't seem to support sending ZLPs at all.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251014203528.3f9783c4.michal.pecio@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On all platforms set_clock_selection() writes to a GRF register. This
requires certain clocks running and thus should happen before the
clocks are disabled.
This has been noticed on RK3576 Sige5, which hangs during system suspend
when trying to suspend the second network interface. Note, that
suspending the first interface works, because the second device ensures
that the necessary clocks for the GRF are enabled.
Cc: stable@vger.kernel.org Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251014-rockchip-network-clock-fix-v1-1-c257b4afdf75@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad").
Before this commit, on the broadcast mode, all devices were traversed using the
bond_for_each_slave_rcu. This patch supports traversing devices by using all_slaves.
Therefore, we need to update the slave array when enslave or release slave.
Fixes: ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad") Cc: Simon Horman <horms@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: <stable@vger.kernel.org> Reported-by: Jiri Slaby <jirislaby@kernel.org> Tested-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/a97e6e1e-81bc-4a79-8352-9e4794b0d2ca@kernel.org/ Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20251016125136.16568-1-tonghao@bamaicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c5581b ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get().
There is no page fault without MMU. Compiling the rtapp/pagefault monitor
without CONFIG_MMU fails as page fault tracepoints' definitions are not
available.
Make rtapp/pagefault monitor depends on CONFIG_MMU.
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors.
Fixes: de090d1ccae1 ("rv: Fix wrong type cast in enabled_monitors_next()") Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/linux-trace-kernel/20250923002004.GA2836051@ax162/ Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20251002082235.973099-1-namcao@linutronix.de Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk.
Link: https://lore.kernel.org/all/20251009142917.517229-1-kartikey406@gmail.com/T/ Link: https://lkml.kernel.org/r/20251009154903.522339-1-kartikey406@gmail.com Fixes: 53069d4e7695 ("Ocfs2/move_extents: move/defrag extents within a certain range.") Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reported-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com Tested-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?id=2959889e1f6e216585ce522f7e8bc002b46ad9e7 Reviewed-by: Mark Fasheh <mark@fasheh.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS Malta platform code registers the PCI southbridge legacy port I/O
PS/2 keyboard range as a standard resource marked as busy. It prevents
the i8042 driver from registering as it fails to claim the resource in
a call to i8042_platform_init(). Consequently PS/2 keyboard and mouse
devices cannot be used with this platform.
Fix the issue by removing the busy marker from the standard reservation,
making the driver register successfully:
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
and the resource show up as expected among the legacy devices:
If the i8042 driver has not been configured, then the standard resource
will remain there preventing any conflicting dynamic assignment of this
PCI port I/O address range.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/alpine.DEB.2.21.2510211919240.8377@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
adpm12160 is a dc-dc power module. The firmware was updated and the
coeeficients in the pmbus_driver_info needs to be updated. Since the
part has not yet released with older FW, this permanent change to
reflect the latest should be ok.
The original code causes a circular locking dependency found by lockdep.
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U
------------------------------------------------------
xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660
Fix TCP_Server_Info::credits to be signed, just as echo_credits and
oplock_credits are. This also fixes what ought to get at least a
compilation warning if not an outright error in *get_credits_field() as a
pointer to the unsigned server->credits field is passed back as a pointer
to a signed int.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Acked-by: Pavel Shilovskiy <pshilovskiy@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the commit c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org # 6.12.x Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to force a lookup by unhashing the moved dentry after
successfully renaming the file on server. The file metadata will be
re-fetched from server, if necessary, in the next call to
->d_revalidate() anyways.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Reviewed-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com> Fixes: f7381b911640 ("slab: mark slab->obj_exts allocation failures unconditionally") Cc: <stable@vger.kernel.org> Signed-off-by: Hao Ge <gehao@kylinos.cn> Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging.
In has_thead_homogeneous_vlenb(), smatch detected that the vlenb variable
could be used while uninitialized. It appears that this could happen if
no CPUs described in DT have the "thead,vlenb" property.
Fix by initializing vlenb to 0, which will keep thead_vlenb_of set to 0
(as it was statically initialized). This in turn will cause
riscv_v_setup_vsize() to fall back to CSR probing - the desired result if
thead,vlenb isn't provided in the DT data.
While here, fix a nearby comment typo.
Cc: stable@vger.kernel.org Cc: Charlie Jenkins <charlie@rivosinc.com> Fixes: 377be47f90e41 ("riscv: vector: Use vlenb from DT for thead") Signed-off-by: Paul Walmsley <pjw@kernel.org> Link: https://lore.kernel.org/r/22674afb-2fe8-2a83-1818-4c37bd554579@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is reported that commit 85975daeaa4d ("cpuidle: menu: Avoid discarding
useful information") led to a performance regression on Intel Jasper Lake
systems because it reduced the time spent by CPUs in idle state C7 which
is correlated to the maximum frequency the CPUs can get to because of an
average running power limit [1].
Before that commit, get_typical_interval() would have returned UINT_MAX
whenever it had been unable to make a high-confidence prediction which
had led to selecting the deepest available idle state too often and
both power and performance had been inadequate as a result of that on
some systems. However, this had not been a problem on systems with
relatively aggressive average running power limits, like the Jasper Lake
systems in question, because on those systems it was compensated by the
ability to run CPUs faster.
It was addressed by causing get_typical_interval() to return a number
based on the recent idle duration information available to it even if it
could not make a high-confidence prediction, but that clearly did not
take the possible correlation between idle power and available CPU
capacity into account.
For this reason, revert most of the changes made by commit 85975daeaa4d,
except for one cosmetic cleanup, and add a comment explaining the
rationale for returning UINT_MAX from get_typical_interval() when it
is unable to make a high-confidence prediction.
Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information") Closes: https://lore.kernel.org/linux-pm/36iykr223vmcfsoysexug6s274nq2oimcu55ybn6ww4il3g3cv@cohflgdbpnq7/ [1] Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/3663603.iIbC2pHGDl@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a filesystem with parent pointers, xchk_nlinks_collect_dir walks both
the directory entries (data fork) and the parent pointers (attr fork) to
determine the correct link count. Unfortunately I forgot to update the
lock mode logic to handle the case of a directory whose attr fork is in
btree format and has not yet been loaded *and* whose data fork doesn't
need loading.
This leads to a bunch of assertions from xfs/286 in xfs_iread_extents
because we only took ILOCK_SHARED, not ILOCK_EXCL. You'd need the rare
happenstance of a directory with a large number of non-pptr extended
attributes set and enough memory pressure to cause the directory to be
evicted and partially reloaded from disk.
I /think/ this only started in 6.18-rc1 because I've started seeing OOM
errors with the maple tree slab using 70% of memory, and this didn't
happen in 6.17. Yay dynamic systems!
Cc: stable@vger.kernel.org # v6.10 Fixes: 77ede5f44b0d86 ("xfs: walk directory parent pointers to determine backref count") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34a3 ("gpio: 104-idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5c2 ("gpio: pci-idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 29d6d30f5c8a ("Btrfs: send, don't send rmdir for same target
multiple times") has fixed an issue that a send stream contained a rmdir
operation for the same directory multiple times. After that fix we keep
track of the last directory for which we sent a rmdir operation and
compare with it before sending a rmdir for the parent inode of a deleted
hardlink we are processing. But there is still a corner case that in
between rmdir dir operations for the same inode we find deleted hardlinks
for other parent inodes, so tracking just the last inode for which we sent
a rmdir operation is not enough.
Hardlinks of a file in the same directory are stored in the same INODE_REF
item, but if the number of hardlinks is too large and can not fit in a
leaf, we use INODE_EXTREF items to store them. The key of an INODE_EXTREF
item is (inode_id, INODE_EXTREF, hash[name, parent ino]), so between two
hardlinks for the same parent directory, we can find others for other
parent directories. For example for the reproducer below we get the
following (from a btrfs inspect-internal dump-tree output):
So tracking the last directory's inode number does not work in this case
since we process a link for parent inode 257, then for 258 and then back
again for 257, and that second time we process a deleted link for 257 we
think we have not yet sent a rmdir operation.
Fix this by using a rbtree to keep track of all the directories for which
we have already sent rmdir operations, and add those directories to the
'check_dirs' ref list in process_recorded_refs() only if the directory is
not yet in the rbtree, otherwise skip it since it means we have already
sent a rmdir operation for that directory.
The following test script reproduces the problem:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/a $MNT/b
echo 123 > $MNT/a/foo
for ((i = 1; i <= 1000; i++)); do
ln $MNT/a/foo $MNT/a/foo.$i
ln $MNT/a/foo $MNT/b/foo.$i
done
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
The current approach is a bit naive, and hence calls the time querying
way too often. Only start the "doing work" timer when there's actual
work to do, and then use that information to terminate (and account) the
work time once done. This greatly reduces the frequency of these calls,
when they cannot have changed anyway.
Running a basic random reader that is setup to use SQPOLL, a profile
before this change shows these as the top cycle consumers:
getrusage() does a lot more than what the SQPOLL accounting needs, the
latter only cares about (and uses) the stime. Rather than do a full
RUSAGE_SELF summation, just query the used stime instead.
Cc: stable@vger.kernel.org Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads") Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hwprobe vDSO data for some keys, like MISALIGNED_VECTOR_PERF,
is determined by an asynchronous kthread. This can create a race
condition where the kthread finishes after the vDSO data has
already been populated, causing userspace to read stale values.
To fix this race, a new 'ready' flag is added to the vDSO data,
initialized to 'false' during arch_initcall_sync. This flag is
checked by both the vDSO's user-space code and the riscv_hwprobe
syscall. The syscall serves as a one-time gate, using a completion
to wait for any pending probes before populating the data and
setting the flag to 'true', thus ensuring userspace reads fresh
values on its first request.
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields.
Acked-by: Michael S. Tsirkin <mst@redhat.com> Fixes: a2fb4bc4e2a6a ("net: implement virtio helpers to handle UDP GSO tunneling") Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20251022034421.70244-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 370645f41e6e ("dma-mapping: force bouncing if the kmalloc() size is
not cache-line-aligned") introduced DMA_BOUNCE_UNALIGNED_KMALLOC feature
and permitted architecture specific code configure kmalloc slabs with
sizes smaller than the value of dma_get_cache_alignment().
When that feature is enabled, the physical address of some small
kmalloc()-ed buffers might be not aligned to the CPU cachelines, thus not
really suitable for typical DMA. To properly handle that case a SWIOTLB
buffer bouncing is used, so no CPU cache corruption occurs. When that
happens, there is no point reporting a false-positive DMA-API warning that
the buffer is not properly aligned, as this is not a client driver fault.
[m.szyprowski@samsung.com: replace is_swiotlb_allocated() with is_swiotlb_active(), per Catalin] Link: https://lkml.kernel.org/r/20251010173009.3916215-1-m.szyprowski@samsung.com Link: https://lkml.kernel.org/r/20251009141508.2342138-1-m.szyprowski@samsung.com Fixes: 370645f41e6e ("dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: Robin Murohy <robin.murphy@arm.com> Cc: "Isaac J. Manjarres" <isaacmanjarres@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The blocker tracking mechanism assumes that lock pointers are at least
4-byte aligned to use their lower bits for type encoding.
However, as reported by Eero Tamminen, some architectures like m68k
only guarantee 2-byte alignment of 32-bit values. This breaks the
assumption and causes two related WARN_ON_ONCE checks to trigger.
To fix this, the runtime checks are adjusted to silently ignore any lock
that is not 4-byte aligned, effectively disabling the feature in such
cases and avoiding the related warnings.
Thanks to Geert Uytterhoeven for bisecting!
Link: https://lkml.kernel.org/r/20250909145243.17119-1-lance.yang@linux.dev Fixes: e711faaafbe5 ("hung_task: replace blocker_mutex with encoded blocker") Signed-off-by: Lance Yang <lance.yang@linux.dev> Reported-by: Eero Tamminen <oak@helsinkinet.fi> Closes: https://lore.kernel.org/lkml/CAMuHMdW7Ab13DdGs2acMQcix5ObJK0O2dG_Fxzr8_g58Rc1_0g@mail.gmail.com Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Anna Schumaker <anna.schumaker@oracle.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Finn Thain <fthain@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Granados <joel.granados@kernel.org> Cc: John Stultz <jstultz@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Lance Yang <lance.yang@linux.dev> Cc: Mingzhe Yang <mingzhe.yang@ly.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Yongliang Gao <leonylgao@tencent.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Cc: Jay Vosburgh <jv@jvosburgh.net> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Vincent Bernat <vincent@bernat.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c45beebfde34 ("ovl: support encoding fid from inode with no alias") Signed-off-by: Jakub Acs <acsjakub@amazon.de> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Christian Brauner <brauner@kernel.org> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we do mlx5e_detach_netdev() we eventually disable blocking events
notifier, among those events are IPsec MPV events from IB to core.
So before disabling those blocking events, make sure to also unregister
the devcom device and mark all this device operations as complete,
in order to prevent the other device from using invalid netdev
during future devcom events which could cause the trace below.
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf0d ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
openvpn TCP encapsulation uses a custom queue to deliver packets to
userspace. Currently it relies on datagram_poll, which checks
sk_receive_queue, leading to false readiness signals when that queue
contains non-userspace packets.
Switch ovpn_tcp_poll to use datagram_poll_queue with the peer's
user_queue, ensuring poll only signals readiness when userspace data is
actually available. Also refactor ovpn_tcp_poll in order to enforce the
assumption we can make on the lifetime of ovpn_sock and peer.
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Antonio Quartulli <antonio@openvpn.net> Signed-off-by: Ralf Lici <ralf@mandelbit.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: efd729408bc7 ("ovpn: use datagram_poll_queue for socket readiness in TCP") Signed-off-by: Sasha Levin <sashal@kernel.org>
espintcp uses a custom queue (ike_queue) to deliver packets to
userspace. The polling logic relies on datagram_poll, which checks
sk_receive_queue, which can lead to false readiness signals when that
queue contains non-userspace packets.
Switch espintcp_poll to use datagram_poll_queue with ike_queue, ensuring
poll only signals readiness when userspace data is actually available.
HSR/PRP driver does not handle correctly having slaves/interlink devices
in a different net namespace. Currently, it is possible to create a HSR
link in a different net namespace than the slaves/interlink with the
following command:
ip link add hsr0 netns hsr-ns type hsr slave1 eth1 slave2 eth2
As there is no use-case on supporting this scenario, enforce that HSR
device link matches netns defined by IFLA_LINK_NETNSID.
The iproute2 command mentioned above will throw the following error:
Error: hsr: HSR slaves/interlink must be on the same net namespace than HSR link.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20251020135533.9373-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
chunk->skb pointer is dereferenced in the if-block where it's supposed
to be NULL only.
chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list
instead and do it just before replacing chunk->skb. We're sure that
otherwise chunk->skb is non-NULL because of outer if() condition.
In ptp_ocp_sma_fb_init(), the code mistakenly used bp->sma[1]
instead of bp->sma[i] inside a for-loop, which caused only SMA[1]
to have its DIRECTION_CAN_CHANGE capability cleared. This led to
inconsistent capability flags across SMA pins.
hibmcge uses fixed_phy_register() et al, but doesn't cater for the case
that hibmcge is built-in and fixed_phy is a module. To solve this
select FIXED_PHY.
Fixes: 1d7cd7a9c69c ("net: hibmcge: support scenario without PHY") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/c4fc061f-b6d5-418b-a0dc-6b238cdbedce@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaeea3 ("erofs: fix up compacted indexes for block size < 4096") Fixes: 1a5223c182fd ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()") Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/35167.1760645886@localhost Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03cf2 ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()") Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Resolve race conditions in timestamp events list handling between TX
and RX paths causing missed timestamps.
The current implementation uses a single events list for both TX and RX
timestamps. The am65_cpts_find_ts() function acquires the lock,
splices all events (TX as well as RX events) to a temporary list,
and releases the lock. This function performs matching of timestamps
for TX packets only. Before it acquires the lock again to put the
non-TX events back to the main events list, a concurrent RX
processing thread could acquire the lock (as observed in practice),
find an empty events list, and fail to attach timestamp to it,
even though a relevant event exists in the spliced list which is yet to
be restored to the main list.
Fix this by creating separate events lists to handle TX and RX
timestamps independently.
With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changed
in inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc,
just remove it.
After removing the INET_PROTOSW_ICSK flag, this patch alse revert
commit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC")
to avoid casting smc_sock to inet_connection_sock.
Reported-by: syzbot+f775be4458668f7d220e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f775be4458668f7d220e Tested-by: syzbot+f775be4458668f7d220e@syzkaller.appspotmail.com Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20251017024827.3137512-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes.
Fixes: f52ac7028bec ("net/mlx5e: RX, Add XDP multi-buffer support in Striding RQ") Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1760644540-899148-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
XDP programs can release xdp_buff fragments when calling
bpf_xdp_adjust_tail(). The driver currently assumes the number of
fragments to be unchanged and may generate skb with wrong truesize or
containing invalid frags. Fix the bug by generating skb according to
xdp_buff after the XDP program runs.
Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1760644540-899148-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In addition to can_dropped_invalid_skb(), the helper function
can_dev_dropped_skb() checks whether the device is in listen-only mode and
discards the skb accordingly.
Replace can_dropped_invalid_skb() by can_dev_dropped_skb() to also drop
skbs in for listen-only mode.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/all/20251017-bizarre-enchanted-quokka-f3c704-mkl@pengutronix.de/ Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-3-556665793fa4@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
