Asterisk 18103 - Fix reload crash caused by destroying default parking lot
Default parking lot was being destroyed in reload and was not being rebuilt properly.
This patch keeps features.c reload from destroying the default parking lot in 1.6.2.
Bug was caused by a hasty backport which didn't test reload enough times to catch the
problem.
Incorrect playback for Spanish in some circumstances
When you say the time in spanish and it is 01:00 - 01:59 or 13:00 - 13:59 you
must use female pronunciation "1F". The function "say_date_with_format_es" does
not take this in account.
(closes ASTERISK-15016) Patch-by: Luis Jimenez
........
Incoming and outgoing call legs of a data call are using different
formats: a-law, u-law. When the call is bridged, the media stream is run
through translation to convert the media formats. The translation is bad
for data calls.
* Make incoming call that does not explicitly specify u-law or a-law use
the DAHDI channel's default law. The outgoing call always uses the
default law from the DAHDI channel.
Sean Bright [Thu, 28 Jul 2011 13:03:58 +0000 (13:03 +0000)]
The default conf-usermenu says that '8' can be used to leave the conference, so
put that in the sample user menu. '5' is supposed to extend the conference, but
there doesn't appear to be a concept of that in the menu actions.
Changes sound file for prepend "then-press-pound" to "vm-then-pound" which is the same
prompt, only it turned out "then-press-pound" was part of extra sounds. Also, vm is more
appropriate anyway.
........
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
Remove lastmsgssent from sip it has not been working since 1.6
Clean up the return values to be consistant not currently used
Add doxygen returns
MWI Event is sent on Register
Deadlocks dealing with dialplan hints during reload.
There are two remaining different deadlocks reported dealing with dialplan
hints.
The deadlock in ASTERISK-17666 is caused by invalid locking order in
ast_remove_hint(). The hints container must be locked before the hint
object.
The deadlock in ASTERISK-17760 is caused by a catch-22 situation in
handle_statechange(). The deadlock is caused by not having the conlock
before calling the watcher callbacks. Unfortunately, having that lock
causes a different deadlock as reported in ASTERISK-16961.
* Fixed ast_remove_hint() locking order.
* Made handle_statechange() no longer call the watcher callbacks holding
any locks that matter.
* Made hint ao2 destructor do the watcher callbacks for extension
deactivation to guarantee that they get called.
* Fixed hint reference leak in ast_add_hint() if the callback container
constructor failed.
* Fixed hint reference leak in complete_core_show_hint() for every hint it
found for CLI tab completion.
* Adjusted locking in ast_merge_contexts_and_delete() for safety.
* Added context_merge_lock to prevent ast_merge_contexts_and_delete() and
handle_statechange() from interfering with each other.
* Fixed ast_change_hint() not taking into account that the extension is
used for the hash key.
The PickupChan uses the ampersand as the argument separator.
Was documented as:
PickupChan(channel[,channel2[,...][,options]])
Fixed documentation to:
PickupChan(Technology/Resource[&Technology2/Resource2[&...]][,options])
This is a continuation of ASTERISK-17494 for v1.8 and later.
(closes issue ASTERISK-18144)
Reported by: Erik Smith
Patches:
pickupchan_ducumentation-v2.patch (License #6263) patch uploaded by Erik Smith
Tested by: Erik Smith
........
The functionality of inband DTMF in chan_sip relied upon
ast_rtp_instance_dtmf_mode_get/set not working properly to avoid calling
ast_rtp_instance_dtmf_begin/end on RTP streams with inband DTMF. According to
documentation, ast_rtp_instance_dtmf_begin/end is meant only for RFC2833 DTMF,
never inband. This fixes the regression introduced in revision 328823.
........
Revert partial attempt at handling pathnames with spaces.
Revision 299794 attempted to improve the build system to be able to handle
pathnames (primarily DESTDIR) with spaces in them, since this is common on
some platforms (including Mac OSX). Unfortunately, the changes were incomplete
and did not actually provide the desired behavior, and as a side effect the
functionality that ensured that stale headers in the Asterisk 'include' directory
were removed got broken. In addition, the check for stale (and possibly
incompatible) modules in the Asterisk 'modules' directory also got broken, and
would never report any stale modules. Users upgrading to this version or later
versions would then see unexpected module load errors.
Since there are few users who actually want to install Asterisk into paths
that contain spaces, and a proper fix for the build system would take many hours,
the best solution for now is to just revert the partial solution.
........
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
If a call to MeetMe includes both the dynamic(D) and always request PIN(P)
options, MeetMe will ask for the PIN two times: once for creating the
conference and once for entering the conference. This behavior was introduced
in rev 311616 when adding the CONFFLAG_ALWAYSPROMPT option to the logic branch
controlling PIN entry for joining a conference.
When starting a call with originate, and having the callee channel run Bridge() on pickup, we will double free the dialed_interface_info datastore, causing a crash. Make sure to check if the datastore still exists before trying to free it.
(closes issue ASTERISK-17917)
Reported by: Mark Murawski
Tested by: Mark Murawski
........
small gk processing fixes:
- decrease for 1 second registration ttl for very low expirations (some
providers expire few earlier than TTL)
- delete rrq and registration expire timers on URQ received as we make
new registration.
........
Introduce <support_level> tags in MODULEINFO.
This change introduces MODULEINFO into many modules in Asterisk in order to show
the community support level for those modules. This is used by changes committed
to menuselect by Russell Bryant recently (r917 in menuselect). More information about
the support level types and what they mean is available on the wiki at
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Module+Support+States
........
David Vossel [Wed, 13 Jul 2011 22:09:34 +0000 (22:09 +0000)]
Preserve sample rate quality of wideband mixmonitor recordings.
MixMonitor has the ability to record in any file format Asterisk supports,
but the quality of wideband audio is not preserved. This is because
regardless of the sample rate the call is being recorded in, the audio
is always downsampled to 8khz and then upsampled to whatever wideband
format it is being written as. This patch resolves this by requesting
the audio from the audiohook in the signed linear format closest to the
sample rate of the format we are writing. This fix is only possible for
Asterisk 1.10 because audio hooks in 1.8 are not capable of wideband
audio.
Correct double-free situation in manager output processing.
The process_output() function calls ast_str_append() and xml_translate() on its
'out' parameter, which is a pointer to an ast_str buffer. If either of these
functions need to reallocate the ast_str so it will have more space, they will
free the existing buffer and allocate a new one, returning the address of the
new one. However, because process_output only receives a pointer to the ast_str,
not a pointer to its caller's variable holding the pointer, if the original
ast_str is freed, the caller will not know, and will continue to use it (and
later attempt to free it).
Added additional checks for mailbox / password beginning with '*' character
A bug existed such that if a user entered a password with '*', and the extension 'a' did not exist, an invalid mailbox would be created and the user authenticated. The code was changed to prevent this from occurring, and to prevent users from having mailboxes or passwords defined that begin with the '*' character.
(closes issue ASTERISK-17443)
Reported by: Kevin Scott Adams
Tested by: Matt Jordan
Use 'printf' (POSIX issue 4) instead of 'echo -n', for portability.
The problem with using 'echo -n' is that it is not portable. While BSD systems
required that the '-n' option be removed and interpreted, System V required
that all strings should be echoed with no interpretation of options. This
fundamental difference of behavior means that it is never possible to use the
'-n' flag to echo in tests which are meant to be portable.
In this case, on Mac OS X 10.6, the /bin/sh shell builtin 'echo' uses the
System V semantics of the command, and thus the SHELL test failed on that
platform.
Kinsey Moore [Tue, 12 Jul 2011 14:40:16 +0000 (14:40 +0000)]
Segfault on shutdown when confbridge is active
When undergoing a shutdown and channels are kicked out of a bridge, a segfault
occurs because ConfBridge tries to play sounds on the bridge after the
underlying channels have been blown away due to the shutdown.
Update chan_gtalk to work with changed GMail-based calls
The messages sent by the GMail client have changed, but include the
old-style messages as well. This patch checks for this case and
uses the old-style offer.
David Vossel [Mon, 11 Jul 2011 18:44:06 +0000 (18:44 +0000)]
Updates follow_talker video_mode in confbridge application.
follow_talker mode originally echoed the same video stream
to all participants. As the primary talker switched around, the
video stream would result in the talker seeing themselves. Now
the primary talker sees the last person who was talking rather than
themselves.
Alexandr Anikin [Sun, 10 Jul 2011 01:37:58 +0000 (01:37 +0000)]
Full T.38 handshaking and fax detection
Add full t.38 handshaking for OOH323 that are required for newest T.38
gateway codes.
Add fax detection (cng tone, t38) and dialplan redirection to fax ext on
fax event detected.
Add OOH323() function to set/get t38support and faxdetect parameters.
INVITE 403 Forbidden response always retransmits the maximum times.
Asterisk sends a 403 Forbidden response if authentication fails for an
INVITE as required. However, it ignores the ACK and keeps retransmitting
the response.
* Made not delete the to-tag in the dialog so the expected ACK can be
matched with the dialog and stop the retransmissions.
........
Reset our ast_str before passing it on to dialplan function backends.
It is possible for a dialplan backend to not modify the given buffer or ast_str
and still return success. This causes any previous value stored in the buffer
to be used as if the new function call provided it. Some functions also append
to the given buffer assuming it is empty.
The test_substitution unit test has also been modified to detect this problem.
David Vossel [Thu, 7 Jul 2011 19:39:17 +0000 (19:39 +0000)]
Adds pass-through support for codec CELT.
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
projects / thirdparty / asterisk.git / log
