After commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.
When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.
This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.
The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf869a ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.
As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().
ip_dev_find() always returns real net_device address, whether traffic is
running on a vlan or real device, if traffic is over vlan, filling
endpoint struture with real ndev and an attempt to send a connect request
will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the
issue by using vlan_dev_real_dev().
Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20e507724113 ("ALSA: hda/cs8409: Add support for dolphin") Signed-off-by: Murad Masimov <m.masimov@maxima.ru> Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The resctrl schemata file supports specifying memory bandwidth associated with
the Memory Bandwidth Allocation (MBA) feature via a percentage (this is the
default) or bandwidth in MiBps (when resctrl is mounted with the "mba_MBps"
option).
The allowed range for the bandwidth percentage is from
/sys/fs/resctrl/info/MB/min_bandwidth to 100, using a granularity of
/sys/fs/resctrl/info/MB/bandwidth_gran. The supported range for the MiBps
bandwidth is 0 to U32_MAX.
There are two issues with parsing of MiBps memory bandwidth:
* The user provided MiBps is mistakenly rounded up to the granularity
that is unique to percentage input.
* The user provided MiBps is parsed using unsigned long (thus accepting
values up to ULONG_MAX), and then assigned to u32 that could result in
overflow.
Do not round up the MiBps value and parse user provided bandwidth as the u32
it is intended to be. Use the appropriate kstrtou32() that can detect out of
range values.
Fixes: 8205a078ba78 ("x86/intel_rdt/mba_sc: Add schemata support") Fixes: 6ce1560d35f6 ("x86/resctrl: Switch over to the resctrl mbps_val list") Co-developed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Martin Kletzander <nert.pinx@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver uses internal data structure to construct WQE frame.
It used avid type as u16 which can accommodate up to 64K AVs.
When outstanding AVID crosses 64K, driver truncates AVID and
hence it uses incorrect AVID to WR. This leads to WR failure
due to invalid AV ID and QP is moved to error state with reason
set to 19 (INVALID AVID). When RDMA CM path is used, this issue
hits QP1 and it is moved to error state
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.
This is particularly bad since accessing ingress_ifindex, e.g.
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6 Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
For both CONFIG_NUMA enabled/disabled use mem_topology_setup() to
update max/min_low_pfn.
This also adds min_low_pfn update to CONFIG_NUMA which was initialized
to zero before. (mpe: Though MEMORY_START is == 0 for PPC64=y which is
all possible NUMA=y systems)
Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.
The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.
If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.
Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().
The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together.
As noted by Cong Wang, the splat is false positive, but the code
path leading to the report is an unexpected one: a client is
attempting an MPC handshake towards the in-kernel listener created
by the in-kernel PM for a port based signal endpoint.
Such connection will be never accepted; many of them can make the
listener queue full and preventing the creation of MPJ subflow via
such listener - its intended role.
Explicitly detect this scenario at initial-syn time and drop the
incoming MPC request.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-1-7faea8e6b6ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mib.[ch], because commit 6982826fe5e5 ("mptcp: fallback
to TCP after SYN+MPC drops"), and commit 27069e7cb3d1 ("mptcp: disable
active MPTCP in case of blackhole") are linked to new features, not
available in this version. Resolving the conflicts is easy, simply
adding the new lines declaring the new "endpoint attempt" MIB entry.
Also a conflict in protocol.h, because commit fce68b03086f ("mptcp:
add scheduled in mptcp_subflow_context") is not in this version, and
changes the context by introducing 'scheduled' variable just before.
Also a conflict in pm_netlink.c, because commit 3aa362494170 ("mptcp:
avoid ssock usage in mptcp_pm_nl_create_listen_socket()") is not in
this version, and refactor the function: that's fine, we can still set
pm_listener before doing the 'listen()', taking 'ssock->sk' as 'ssk'
is not defined before this refactoring. There is also a conflict
because the context has been changed later in commit 69925a346acb
("mptcp: ensure listener is unhashed before updating the sk status"). ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
The buggy address belongs to the object at ffff8880569ac800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 88 bytes inside of
freed 512-byte region [ffff8880569ac800, ffff8880569aca00)
That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)',
which will initiate the release of its memory. Even if it is very likely
the release and the re-utilisation will be done later on, it is of
course better to avoid any issues and read the content of 'subflow'
before closing it.
Fixes: 1c1f72137598 ("mptcp: pm: only decrement add_addr_accepted for MPJ req") Cc: stable@vger.kernel.org Reported-by: syzbot+3c8b7a8e7df6a2a226ca@syzkaller.appspotmail.com Closes: https://lore.kernel.org/670d7337.050a0220.4cbc0.004f.GAE@google.com Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20241015-net-mptcp-uaf-pm-rm-v1-1-c4ee5d987a64@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in pm_netlink.c, because commit a88c9e496937 ("mptcp: do not
block subflows creation on errors") is linked to a new feature, not
available in this version. This commit modifies the context. Resolving
the conflicts is easy, simply moving the lines the same way it was
done in the original patch, ignoring the comment that is not in this
version. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Additionally syzkaller provided a nice reproducer. The repro enables
pmtu on the loopback device, leading to tcp_mtu_probe() generating
very large probe packets.
tcp_can_coalesce_send_queue_head() currently does not check for
mptcp-level invariants, and allowed the creation of cross-DSS probes,
leading to the mentioned corruption.
Address the issue teaching tcp_can_coalesce_send_queue_head() about
mptcp using the tcp_skb_can_collapse(), also reducing the code
duplication.
Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions") Cc: stable@vger.kernel.org Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-2-c6fb8e93e551@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in tcp_output.c, because commit 65249feb6b3d ("net: add
support for skbs with unreadable frags"), and commit 9b65b17db723
("net: avoid double accounting for pure zerocopy skbs") are not in
this version. These commits are linked to new features and introduce
new conditions which cause the conflicts. Resolving this is easy: we
can ignore the missing new condition, and use tcp_skb_can_collapse()
like in the original patch. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mib.[ch], because commit 104125b82e5c ("mptcp: add mib
for infinite map sending") is linked to a new feature, not available
in this version. Resolving the conflicts is easy, simply adding the
new lines declaring the new "DSS corruptions" MIB entries.
Also removed in protocol.c and subflow.c all DEBUG_NET_WARN_ON_ONCE
because they are not defined in this version: enough with the MIB
counters that have been added in this commit. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.
Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e32d262c89e2 ("mptcp: handle consistently DSS corruption")
[ Conflicts in protocol.c, because commit 3e5014909b56 ("mptcp: cleanup
MPJ subflow list handling") is not in this version. This commit is
linked to a new feature, changing the context around. The new line
can still be added at the same place.
Conflicts in protocol.h, because commit 4f6e14bd19d6 ("mptcp: support
TCP_CORK and TCP_NODELAY") is not in this version. This commit is
linked to a new feature, changing the context around. The new line can
still be added at the same place.
Conflicts in subflow.c, because commit 0348c690ed37 ("mptcp: add the
fallback check") is not in this version. This commit is linked to a
new feature, changing the context around. The new line can still be
added at the same place. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.
Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition") Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-2-1de0daca2d42%40linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New processors have become pickier about the local APIC timer state
before entering low power modes. These low power modes are used (for
example) when you close your laptop lid and suspend. If you put your
laptop in a bag and it is not in this low power mode, it is likely
to get quite toasty while it quickly sucks the battery dry.
The problem boils down to some CPUs' inability to power down until the
CPU recognizes that the local APIC timer is shut down. The current
kernel code works in one-shot and periodic modes but does not work for
deadline mode. Deadline mode has been the supported and preferred mode
on Intel CPUs for over a decade and uses an MSR to drive the timer
instead of an APIC register.
Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to
MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing
to the initial-count register (APIC_TMICT) which is ignored in
TSC-deadline mode.
Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be
enough to tell the hardware that the timer will not fire in any of the
timer modes. But mitigating AMD erratum 411[1] also requires clearing
out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in
practice on Intel Lunar Lake systems, which is the motivation for this
change.
1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf
Fixes: 279f1461432c ("x86: apic: Use tsc deadline for oneshot when available") Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf(). However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds access
properly.
MI_00 Quectel USB Diag Port
MI_01 Quectel USB NMEA Port
MI_02 Quectel USB AT Port
MI_03 Quectel USB Modem Port
MI_04 Quectel USB Net Port
Signed-off-by: Benjamin B. Frost <benjamin@geanix.com> Reviewed-by: Lars Melin <larsm17@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid xHC host from processing a cancelled URB by always turning
cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command.
If the command fails then xHC will start processing the cancelled TD
instead of skipping it once endpoint is restarted, causing issues like
Babble error.
This is not a complete solution as a failed 'Set TR Deq' command does not
guarantee xHC TRB caches are cleared.
The stream contex type (SCT) bitfield is used both in the stream context
data structure, and in the 'Set TR Dequeue pointer' command TRB.
In both cases it uses bits 3:1
The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field
for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value
1 bit left before masking the three bits.
Fix this by first masking and rshifting, just like the similar
SCT_FOR_CTX(p) macro does
This issue has not been visibile as the lost bit 3 is only used with
secondary stream arrays (SSA). Xhci driver currently only supports using
a primary stream array with Linear stream addressing.
Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one
data payload of the currently established maximum size, all data
payloads are required to be maximum-sized except for the last data
payload, which will contain the remaining data. An interrupt transfer
is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or
transfers a zero-length packet'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If bt_init() fails, the debugfs directory currently is not removed. If
the module is loaded again after that, the debugfs directory is not set
up properly due to the existing directory.
# modprobe bluetooth
# ls -laF /sys/kernel/debug/bluetooth
total 0
drwxr-xr-x 2 root root 0 Sep 27 14:26 ./
drwx------ 31 root root 0 Sep 27 14:25 ../
-r--r--r-- 1 root root 0 Sep 27 14:26 l2cap
-r--r--r-- 1 root root 0 Sep 27 14:26 sco
# modprobe -r bluetooth
# ls -laF /sys/kernel/debug/bluetooth
ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory
#
# modprobe bluetooth
modprobe: ERROR: could not insert 'bluetooth': Invalid argument
# dmesg | tail -n 6
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Faking l2cap_init() failure for testing
NET: Unregistered PF_BLUETOOTH protocol family
# ls -laF /sys/kernel/debug/bluetooth
total 0
drwxr-xr-x 2 root root 0 Sep 27 14:31 ./
drwx------ 31 root root 0 Sep 27 14:26 ../
#
The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.
Add missing full-scale range array value.
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com> Cc: <Stable@vger.kernel.org> Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.
Cc: stable@vger.kernel.org Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.
Cc: <stable@vger.kernel.org> Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if condition (!bo and !vmw_kms_srf_ok()) was met
we go to err_out with ret == 0.
err_out dereferences vfb if ret == 0, but in our case vfb is still NULL.
Fix this by assigning sensible error to ret.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Cc: stable@vger.kernel.org Fixes: 810b3e1683d0 ("drm/vmwgfx: Support topology greater than texture size") Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241002122429.1981822-1-kniv@yandex-team.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Fixes: 74d2aacbe840 ("drm: Validate encoder->possible_clones") Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/ Tested-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.
entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.
Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameters for the diag 0x258 are real addresses, not virtual, but
KVM was using them as virtual addresses. This only happened to work, since
the Linux kernel as a guest used to have a 1:1 mapping for physical vs
virtual addresses.
Fix KVM so that it correctly uses the addresses as real addresses.
According to the VT220 specification the possible character combinations
sent on RETURN are only CR or CRLF [0].
The Return key sends either a CR character (0/13) or a CR
character (0/13) and an LF character (0/10), depending on the
set/reset state of line feed/new line mode (LNM).
The sclp/vt220 driver however uses LFCR. This can confuse tools, for
example the kunit runner.
Previously, the domain_context_clear() function incorrectly called
pci_for_each_dma_alias() to set up context entries for non-PCI devices.
This could lead to kernel hangs or other unexpected behavior.
Add a check to only call pci_for_each_dma_alias() for PCI devices. For
non-PCI devices, domain_context_clear_one() is called directly.
Putting the cpumask on the stack is deprecated for a long time (since 2d3854a37e8), as these can be big. Given that, change the on-stack
allocation of allowed_mask to be dynamically allocated.
Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset") Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com> Link: https://lore.kernel.org/r/20240916111150.1266191-1-felix.moessbauer@siemens.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:
BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391
The submit queue polling threads are userland threads that just never
exit to the userland. When creating the thread with IORING_SETUP_SQ_AFF,
the affinity of the poller thread is set to the cpu specified in
sq_thread_cpu. However, this CPU can be outside of the cpuset defined
by the cgroup cpuset controller. This violates the rules defined by the
cpuset controller and is a potential issue for realtime applications.
In b7ed6d8ffd6 we fixed the default affinity of the poller thread, in
case no explicit pinning is required by inheriting the one of the
creating task. In case of explicit pinning, the check is more
complicated, as also a cpu outside of the parent cpumask is allowed.
We implemented this by using cpuset_cpus_allowed (that has support for
cgroup cpusets) and testing if the requested cpu is in the set.
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240520100514.925681-1-jacek.lawrynowicz@linux.intel.com
[ Sherry: bp to fix CVE-2024-39497, ignore context change due to missing
commit 21aa27ddc582 ("drm/shmem-helper: Switch to reservation lock") ] Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
Tasklets have an inherent problem with memory corruption. The function
tasklet_action_common calls tasklet_trylock, then it calls the tasklet
callback and then it calls tasklet_unlock. If the tasklet callback frees
the structure that contains the tasklet or if it calls some code that may
free it, tasklet_unlock will write into free memory.
The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but
it is not a sufficient fix and the data corruption can still happen [1].
There is no fix for dm-verity and dm-verity will write into free memory
with every tasklet-processed bio.
There will be atomic workqueues implemented in the kernel 6.9 [2]. They
will have better interface and they will not suffer from the memory
corruption problem.
But we need something that stops the memory corruption now and that can be
backported to the stable kernels. So, I'm proposing this commit that
disables tasklets in both dm-crypt and dm-verity. This commit doesn't
remove the tasklet support, because the tasklet code will be reused when
atomic workqueues will be implemented.
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Sherry: bp to fix CVE-2023-52530, resolved minor conflicts in
net/mac80211/cfg.c because of context change due to missing commit 23a5f0af6ff4 ("wifi: mac80211: remove cipher scheme support") ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")] Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Patrick Roy <roypat@amazon.co.uk> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Graf <graf@amazon.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Gowans <jgowans@amazon.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com Fixes: 0fe6e20b9c4c ("hugetlb, rmap: add reverse mapping for hugepage") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its
effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP") Signed-off-by: Nianyao Tang <tangnianyao@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit 7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.
Cc: stable@vger.kernel.org Fixes: 0606f422b453 ("posix clocks: Introduce dynamic clocks") Acked-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/ Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xdp_drops statistic indicates the number of XDP frames dropped in
the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and
XDP_REDIRECT actions. If frame loss occurs in these two actions, the
frames loss count should not be included in xdp_drops, because there
are already xdp_tx_drops and xdp_redirect_failures to count the frame
loss of these two actions, so it's better to remove xdp_drops statistic
from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.
Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reports uninitialized memory access in udf_rename() when updating
checksum of '..' directory entry of a moved directory. This is indeed
true as we pass on-stack diriter.fi to the udf_update_tag() and because
that has only struct fileIdentDesc included in it and not the impUse or
name fields, the checksumming function is going to checksum random stack
contents beyond the end of the structure. This is actually harmless
because the following udf_fiiter_write_fi() will recompute the checksum
from on-disk buffers where everything is properly included. So all that
is needed is just removing the bogus calculation.
Nobody uses the bh returned from udf_expand_dir_adinicb(). Don't return
it.
Signed-off-by: Jan Kara <jack@suse.cz>
[cascardo: skip backport of 101ee137d32a ("udf: Drop VARCONV support")] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there is an error when adding extent to the directory to expand it,
make sure to propagate the error up properly. This is not expected to
happen currently but let's make the code more futureproof.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove old directory iteration code that is now unused.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_link() to use new directory iteration code for adding entry
into the directory.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_mkdir() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_add_nondir() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement function udf_fiiter_add_entry() adding new directory entries
using new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_unlink() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_rmdir() to use new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert empty_dir() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_get_parent() to use udf_fiiter_find_entry().
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_lookup() to use udf_fiiter_find_entry() for looking up
directory entries.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_readdir() to new directory iteration functions.
Signed-off-by: Jan Kara <jack@suse.cz>
[cascardo: conflict due to skipped 59a16786fa7a ("udf: replace ll_rw_block()")] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_rename() to use new directory iteration code.
Reported-by: syzbot+0eaad3590d65102b9391@syzkaller.appspotmail.com Reported-by: syzbot+b7fc73213bc2361ab650@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide function udf_fiiter_delete_entry() to mark directory entry as
deleted using new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement searching for directory entry - udf_fiiter_find_entry() -
using new directory iteration code.
Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is just one caller of udf_expand_dir_adinicb(). Move the function
to its caller into namei.c as it is more about directory handling than
anything else anyway.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert udf_expand_dir_adinicb() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new support code for iterating directory entries. The code is also
more carefully verifying validity of on-disk directory entries to avoid
crashes on malicious media.
Signed-off-by: Jan Kara <jack@suse.cz>
[cascardo: use ll_rw_block instead of bh_readahead_batch] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
As advised by Documentation/networking/napi.rst, masking IRQs after
calling napi_schedule can be racy. Avoid this by only masking/scheduling
if napi_schedule_prep returns true.
Fixes: 9e2bc267e780 ("net: axienet: Use NAPI for TX completion path") Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240913145711.2284295-1-sean.anderson@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
softirq may get lost if an Rx interrupt comes before we call
napi_enable. Move napi_enable in front of axienet_setoptions(), which
turns on the device, to address the issue.
Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.
Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com> Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: acc641ab95b66 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
