Michal Privoznik [Sat, 27 May 2017 10:24:30 +0000 (12:24 +0200)]
qemu: mkdir memory_backing_dir on startup
In 48d9e6cdcc and friends we've allowed users to back guest
memory by a file inside the host. And in order to keep things
manageable the memory_backing_dir variable was introduced to
qemu.conf to specify the directory where the files are kept.
However, libvirt's policy is that directories are created on
domain startup if they don't exist. We've missed this one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Erik Skultety [Tue, 30 May 2017 08:28:18 +0000 (10:28 +0200)]
qemu: json: Fix daemon crash on handling domain shutdown event
commit a8eba5036 added further checking of the guest shutdown cause, but
this enhancement is available since qemu 2.10, causing a crash because
of a NULL pointer dereference on older qemus.
Thread 1 "libvirtd" received signal SIGSEGV, Segmentation fault.
0x00007ffff72441af in virJSONValueObjectGet (object=0x0,
key=0x7fffd5ef11bf "guest")
at util/virjson.c:769
769 if (object->type != VIR_JSON_TYPE_OBJECT)
(gdb) bt
0 in virJSONValueObjectGet
1 in virJSONValueObjectGetBoolean
2 in qemuMonitorJSONHandleShutdown
3 in qemuMonitorJSONIOProcessEvent
4 in qemuMonitorJSONIOProcessLine
5 in qemuMonitorJSONIOProcess
6 in qemuMonitorIOProcess
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Nitesh Konkar [Thu, 25 May 2017 10:17:43 +0000 (15:47 +0530)]
util: hostcpu: Correctly report total number of vcpus in virHostCPUGetMap
Callers expect the return value to be the total number of vcpus in the
host (including offline vcpus). The refactor in c67e04e25fa58104e0fae41
broke this assumption by using virHostCPUGetOnlineBitmap which only
creates a bitmap long enough to hold the last online vcpu.
Report the full number of host vcpus by returning value from
virHostCPUGetCount().
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ning.bo [Tue, 9 May 2017 02:09:07 +0000 (10:09 +0800)]
nodedev: Increase the netlink socket buffer size to the one used by udev
When a number of SRIOV VFs (up to 128 on Intel XL710) is created:
for i in `seq 0 1`; do
echo 63 > /sys/class/net/<interface>/device/sriov_numvfs
done
libvirtd will then report "udev_monitor_receive_device returned NULL"
error because the netlink socket buffer is not big enough (using GDB on
libudev confirmed this with ENOBUFFS) and thus some udev events were
dropped. This results in some devices being missing in the nodedev-list
output. This patch overrides the system's rmem_max limit but for that,
we need to make sure we've got root privileges.
Michal Privoznik [Mon, 29 May 2017 08:04:36 +0000 (10:04 +0200)]
virCapabilitiesInitCaches: Don't leak @cpus
The @cpus is allocated by virFileReadValueBitmap() but never
freed:
==21274== 40 (32 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 808 of 1,004
==21274== at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==21274== by 0x54BA561: virAlloc (viralloc.c:144)
==21274== by 0x54BC604: virBitmapNewEmpty (virbitmap.c:126)
==21274== by 0x54BD059: virBitmapParseUnlimited (virbitmap.c:570)
==21274== by 0x54EECE9: virFileReadValueBitmap (virfile.c:4113)
==21274== by 0x5563132: virCapabilitiesInitCaches (capabilities.c:1548)
==21274== by 0x2BB86E59: virQEMUCapsInit (qemu_capabilities.c:1132)
==21274== by 0x2BBEC067: virQEMUDriverCreateCapabilities (qemu_conf.c:928)
==21274== by 0x2BC3DEAA: qemuStateInitialize (qemu_driver.c:845)
==21274== by 0x5625AAC: virStateInitialize (libvirt.c:770)
==21274== by 0x124519: daemonRunStateInit (libvirtd.c:881)
==21274== by 0x554C927: virThreadHelper (virthread.c:206)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Bjoern Walk [Mon, 22 May 2017 06:38:25 +0000 (08:38 +0200)]
node_device: introduce new capability FC_RPORT
Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.
Bjoern Walk [Mon, 22 May 2017 06:38:24 +0000 (08:38 +0200)]
util: helper functions for fibre channel devices
We will need some convenient helper functions for managing sysfs-entries
for fibre channel-backed devices. Let's implement them and make them
available in the private API.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Bjoern Walk [Mon, 22 May 2017 06:38:23 +0000 (08:38 +0200)]
virsh: nodedev: ability to filter CCW capabilities
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Bjoern Walk [Mon, 22 May 2017 06:38:22 +0000 (08:38 +0200)]
node_device: detect CCW devices
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
Marc Hartmayer [Mon, 22 May 2017 06:38:21 +0000 (08:38 +0200)]
node_device: Unlock obj in case of an error too
Unlock @obj in case of an error too.
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Marc Hartmayer [Mon, 22 May 2017 06:38:20 +0000 (08:38 +0200)]
node_device: Use the @cap iterator variable
Since the switch statement is already using the deref'd @cap variable
and the VIR_NODE_DEV_CAP_NET case uses it, the SCSI_HOST and PCI_DEV
cases may as well use it too.
Suggested-by: Bjoern Walk <bwalk@linux.vnet.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
rpc: Allow up to 256K records to be returned per domain from virConnectGetAllDomainStats.
The number of records that virConnectGetAllDomainStats can return per
domain is currently limited to 4096. This is quite low -- for
example, a single guest with ~320 disks will hit this limit. This
increases the limit to make it much larger. Note that
VIR_NET_MESSAGE_MAX still protects the total message size in the case
where there are many domains and many disks per domain.
I tested this using a guest with 500 disks with no issues.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1440683
rpc: Double buffer size instead of quadrupling buffer size.
When increasing the buffer size up to VIR_NET_MESSAGE_MAX, we
currently quadruple it each time. This unfortunately means that we
cannot allow certain buffer sizes -- for example the current
VIR_NET_MESSAGE_MAX == 33554432 can never be "hit" since ‘newlen’
jumps from 16MB to 64MB.
Instead of quadrupling, double it each time.
Thanks: Daniel Berrange. Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Yi Wang [Fri, 26 May 2017 02:39:48 +0000 (22:39 -0400)]
node_device: fix memory leak in nodeDeviceSysfsGetSCSIHostCaps
@tmp is leaked after the second call to virVHBAGetConfig within
virVHBAIsVportCapable code block because it wasn't freed after making the
first call to the function.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Erik Skultety <eskultet@redhat.com>
Julio Faracco [Thu, 25 May 2017 22:28:14 +0000 (19:28 -0300)]
lxc: Fix wrong VIR_FREE after a return statement
There is a VIR_FREE after a return statement. That code section is never
executed and for this reason the "tty" variable is not being freed. This
commit rearranges the logic.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Julio Faracco [Thu, 25 May 2017 22:27:25 +0000 (19:27 -0300)]
m4: Fix missing with_acl variable
This commit fixes an acl missing variable. The virt-acl.m4 inside the
macro directory does not contain the variable 'with_acl'. So, it is
being set as an empty string "with_acl=''". This is causing a missing
option during the configuration, even if you have acl libs installed.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.
However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.
So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.
This resolves a possible never ending loop and will generate an error:
error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'
NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.
Claudio André [Thu, 25 May 2017 05:19:45 +0000 (02:19 -0300)]
CI: show the log in case of failure
Disclose the content of the 'test-suite.log' file (if available) in
case of failures inside Travis-CI. This is needed to understand what
happened and to provide hints about the proper fix (if applicable).
Testing found an inventive way to cause an error at shutdown by providing the
parent name for the fc host creation using the "same name" as the HBA. Since
the code thus assumed the parent host name provided was the parent HBA and
just extracted out the host number and sent that along to the vport_destroy
this avoided checks made for equality.
So just add the equality check to that path to resolve.
Peter Krempa [Mon, 22 May 2017 15:48:09 +0000 (17:48 +0200)]
rpc: Bump maximum message size to 32M
While most of the APIs are okay with 16M messages, the bulk stats API
can run into the limit in big configurations. Before we devise a new
plan for this, bump this limit slightly to accomodate some more configs.
Pavel Hrdina [Mon, 15 May 2017 13:28:15 +0000 (15:28 +0200)]
conf: don't iterate over backcompat console in virDomainChrDefForeach
If the first console is just a copy of the first serial device we
don't need to iterate over the same device twice in order to perform
actions like security labeling, cgroup configuring, etc.
Currently only security SELinux manager was aware of this fact.
We have to use waitDomainJob instead of waitJob, because of it
unlock the domain until job has finished, so domain will be available
for other clients.
Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
Peter Krempa [Tue, 23 May 2017 15:21:56 +0000 (17:21 +0200)]
qemu: Properly check return value of VIR_STRDUP in qemuDomainGetBlockIoTune
Setting the 'group_name' for a disk would falsely trigger a error path
as in commit 4b57f76502 we did not properly check the return value of
VIR_STRDUP.
Jim Fehlig [Tue, 28 Mar 2017 23:34:16 +0000 (17:34 -0600)]
libxl: add default controllers for USB devices
Attempting to start a domain with USB hostdevs but no USB controllers
fails with the rather cryptic error
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an
error message from QMP server: Bus 'xenusb-0.0' not found
This can be fixed by creating default USB controllers. When no USB
controllers are defined, create the number of 8 port controllers
necessary to accommodate the number of defined USB devices.
Note that USB controllers are already created as needed in the
domainAttachDevice code path. E.g. a USB controller will be created,
if necessary, when attaching a USB device with
'virsh attach-device dom usbdev.xml'.
It turns out that adding the host_mtu field to the PCI capabilities in
the guest bumps the length of PCI capabilities beyond the 32 byte
boundary, so the virtio-net device gets 64 bytes of ioport space
instead of 32, which offsets the address of all the other following
devices. Migration doesn't work very well when the location and length
of PCI capabilities of devices is changed between source and
destination.
This means that we need to make sure that the absence/presence of
host_mtu on the qemu commandline always matches between source and
destination, which means that we need to make setting of host_mtu an
opt-in thing (it can't happen automatically when the bridge being used
has a non-default MTU, which is what commit 2841e675 implemented).
I do want to re-implement this feature with an <mtu auto='on'/>
setting, but probably won't backport that to any stable branches, so
I'm first reverting the original commit, and that revert can be pushed
to the few releases that have been made since the original (3.1.0 -
3.3.0)
Jim Fehlig [Fri, 19 May 2017 21:52:04 +0000 (15:52 -0600)]
libxl: add default listen address for VNC and spice
If a VNC listen address is not specified in domXML, libxl
will default to 127.0.0.1, but this is never reflected in the domXML.
In the case of spice, a missing listen address resulted in listening
on all interfaces, i.e. '0.0.0.0'. If not specified, set the listen
address in virDomainGraphicsDef struct to the libxl default when
creating the frame buffer device. Additionally, set default spice
listen address to 127.0.0.1.
Michal Privoznik [Mon, 22 May 2017 09:44:26 +0000 (11:44 +0200)]
virStreamSparseSendAll: Reset @want in each iteration
There's a slight problem with the current function. Assume we are
currently in a data section and we have say 42 bytes until next
section. Therefore, just before (handler) is called to fill up
the buffer with data, @want is changed to 42 to match the amount
of data left in the current section. However, after hole is
processed, we are back in data section but with incredibly small
@want size. Nobody will ever reset it back. This results in
incredible data fragmentation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Fri, 12 May 2017 15:46:31 +0000 (17:46 +0200)]
qemu: hotplug: print correct vcpu when validating hot(un)plug config
The error message would contain first vcpu id after the list of vcpus
selected for modification. To print the proper vcpu id remember the
first vcpu selected to be modified.
Wang King [Sat, 20 May 2017 01:31:57 +0000 (09:31 +0800)]
util: Don't leak @reply in virSystemdGetMachineNameByPID
@reply is a DBusMessage object returned by virDBusCallMethod in
get machine object call path, dereference it before calling
virDBusCallMethod again to get machine name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Julio Faracco [Sat, 20 May 2017 14:53:54 +0000 (11:53 -0300)]
test: fixing variable names for test suite inside configure.ac.
Both variables for gcov and oom have wrong names inside configure.ac.
For this reason, the Test Suite configuration is not showing the current
configuration.
Before patching:
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage:
configure: Alloc OOM:
configure:
configure: Miscellaneous
After patching (using --enable-test-coverage and --enable-test-oom):
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage: yes
configure: Alloc OOM: yes
configure:
configure: Miscellaneous
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Wim ten Have [Fri, 19 May 2017 14:38:43 +0000 (16:38 +0200)]
xenconfig: fix handling of NULL disk source
It is possible to crash libvirtd when converting xl native config to
domXML when the xl config contains an empty disk source, e.g. an empty
CDROM. Fix by checking that the disk source is non-NULL before parsing it.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Peter Krempa [Thu, 18 May 2017 11:27:24 +0000 (13:27 +0200)]
qemu: monitor: Don't bother extracting vCPU halted state in text monitor
The code causes the 'offset' variable to be overwritten (possibly with
NULL if neither of the vCPUs is halted) which causes a crash since the
variable is still used after that part.
Additionally there's a bug, since strstr() would look up the '(halted)'
string in the whole string rather than just the currently processed line
the returned data is completely bogus.
Rather than switching to single line parsing let's remove the code
altogether since it has a commonly used JSON monitor alternative and
the data itself is not very useful to report.
Julio Faracco [Thu, 18 May 2017 01:53:23 +0000 (22:53 -0300)]
datatypes: removing unnecessary return statement.
There is a wrong 'return' statement after a 'goto' statement inside the
function virConnectCloseCallbackDataRegister(). This commit only removes
the 'return'.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Wang King [Thu, 18 May 2017 04:06:42 +0000 (12:06 +0800)]
util: Do not leak @handles in stop netlink event service
Commit e3ba4025 introduced srv->handles and VIR_RESIZE_N to allocate
@handles as necessary, but did not free the handles during when calling
virNetlinkEventServiceStop.
Wang King [Thu, 18 May 2017 04:06:41 +0000 (12:06 +0800)]
util: Deduplicate code in virNetlinkEventServiceStopAll
Commit 15a71e60 introduced the virNetlinkEventServiceStopAll function, and
the code in virNetlinkEventServiceStop is copied to this function, so just
call virNetlinkEventServiceStop instead.
Erik Skultety [Mon, 6 Mar 2017 16:18:48 +0000 (17:18 +0100)]
nodedev: Introduce mdev capability for mediated devices
Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.
Erik Skultety [Mon, 6 Mar 2017 16:17:34 +0000 (17:17 +0100)]
nodedev: Introduce the mdev capability to a PCI parent device
The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:
Erik Skultety [Mon, 6 Mar 2017 16:20:00 +0000 (17:20 +0100)]
nodedev: Introduce new mdev_types and mdev nodedev capabilities
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
Erik Skultety [Wed, 26 Apr 2017 12:47:15 +0000 (14:47 +0200)]
mdev: Pass a uuidstr rather than an mdev object to some util functions
Namely, this patch is about virMediatedDeviceGetIOMMUGroup{Dev,Num}
functions. There's no compelling reason why these functions should take
an object, on the contrary, having to create an object every time one
needs to query the IOMMU group number, discarding the object afterwards,
seems odd.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 8e09663 "pci: recognize/report GEN4 (PCIe 4.0) card 16GT/s Link
speed" introduced another speed into enum, but mistakenly also altered
field width, so one bit of link width was included there.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Michal Privoznik [Wed, 27 Apr 2016 12:21:10 +0000 (14:21 +0200)]
virsh: Implement sparse stream to vol-upload
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Tue, 12 Apr 2016 13:35:04 +0000 (15:35 +0200)]
virsh: Implement sparse stream to vol-download
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These flags to APIs will tell if caller wants to use sparse
stream for storage transfer. At the same time, it's safe to
enable them in storage driver frontend and rely on our backends
checking the flags. This way we can enable specific flags only on
some specific backends, e.g. enable
VIR_STORAGE_VOL_DOWNLOAD_SPARSE_STREAM for filesystem backend but
not iSCSI backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Tue, 12 Apr 2016 13:17:30 +0000 (15:17 +0200)]
gendispatch: Introduce @sparseflag for our calls
Now, not all APIs are going to support sparse streams. To some it
makes no sense at all, e.g. virDomainOpenConsole() or
virDomainOpenChannel(). To others, we will need a special flag to
indicate that client wants to enable sparse streams. Instead of
having to write RPC dispatchers by hand we can just annotate in
our .x files that a certain flag to certain RPC call enables this
feature. For instance:
Michal Privoznik [Wed, 27 Apr 2016 08:51:46 +0000 (10:51 +0200)]
fdstream: Implement sparse stream
Basically, what is needed here is to introduce new message type
for the messages passed between the event loop callbacks and the
worker thread that does all the I/O. The idea is that instead of
a queue of read buffers we will have a queue where "hole of size
X" messages appear. That way the event loop callbacks can just
check the head of the queue and see if the worker thread is in
data or a hole section and how long the section is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 11 Apr 2016 09:58:19 +0000 (11:58 +0200)]
daemonStreamHandleRead: Wire up seekable stream
Whenever client is able to receive some data from stream
daemonStreamHandleRead is called. But now the behaviour of this
function needs to be changed a bit. Previously it just read data
from underlying file (of chardev or whatever) and sent those
through the stream to client. This model will not work any longer
because it does not differentiate whether underlying file is in
data or hole section. Therefore, at the beginning of this
function add code that checks this situation and acts
accordingly.
So after the this, when wanting to send some data we always check
whether we are not in a hole and if so, skip it an inform client
about its size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 14:35:13 +0000 (16:35 +0200)]
virNetClientStream: Wire up VIR_NET_STREAM_HOLE
Whenever server sends a client stream packet (either regular with
actual data or stream skip one) it is queued on @st->rx. So the
list is a mixture of both types of stream packets. So now that we
have all the helpers needed we can wire their processing up. But
since virNetClientStreamRecvPacket doesn't support
VIR_STREAM_RECV_STOP_AT_HOLE flag yet, let's turn all received
skips into zeroes repeating requested times.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sun, 10 Apr 2016 13:48:27 +0000 (15:48 +0200)]
remote_driver: Implement virStreamSendHole
Now that we have RPC wrappers over VIR_NET_STREAM_HOLE we can
start wiring them up. This commit wires up situation when a
client wants to send a hole to daemon.
To keep stream offsets synchronous, upon successful call on the
daemon skip the same hole in local part of the stream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a function that handles an incoming STREAM_HOLE packet.
Even though it is not wired up yet, it will be soon. At the
beginning do couple of checks whether server plays nicely and
sent us a STREAM_HOLE packed only after we've enabled sparse
streams. Then decodes the message payload to see how big the hole
is and stores it in passed @length argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 12 May 2017 09:26:33 +0000 (11:26 +0200)]
daemon: Implement VIR_NET_STREAM_HOLE handling
Basically, whenever the new type of stream packet arrives to the
daemon call this function that decodes it and calls
virStreamSendHole(). Otherwise a regular data stream packet has
arrived and therefore continue its processing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 13 Apr 2016 14:38:09 +0000 (16:38 +0200)]
Teach wireshark plugin about VIR_NET_STREAM_HOLE
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a special type of stream packet, that is bidirectional
and contains information regarding how many bytes each side will
be skipping in the stream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 11 Apr 2016 14:50:04 +0000 (16:50 +0200)]
Add new flag to daemonCreateClientStream and virNetClientStreamNew
Add a new argument to daemonCreateClientStream in order to allow for
future expansion to mark that a specific stream can be used to skip
data, such as the case with sparsely populated files. The new flag will
be the eventual decision point between client/server to decide whether
both ends can support and want to use sparse streams.
A new bool 'allowSkip' is added to both _virNetClientStream and
daemonClientStream in order to perform the tracking.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 12:25:14 +0000 (14:25 +0200)]
Introduce virStreamInData
This is just an internal API, that calls corresponding function
in stream driver. This function will set @data = 1 if the
underlying file is in data section, or @data = 0 if it is in a
hole. At any rate, @length is set to number of bytes remaining in
the section the file currently is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 13:47:39 +0000 (15:47 +0200)]
Introduce virStreamSparseSendAll
This is just a wrapper over new function that have been just
introduced: virStreamSendHole() . It's very similar to
virStreamSendAll() except it handles sparse streams well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 13:17:51 +0000 (15:17 +0200)]
Introduce virStreamSparseRecvAll
This is just a wrapper over new functions that have been just
introduced: virStreamRecvFlags(), virStreamRecvHole(). It's very
similar to virStreamRecvAll() except it handles sparse streams
well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 13:12:59 +0000 (15:12 +0200)]
Introduce VIR_STREAM_RECV_STOP_AT_HOLE flag
Add a new flag to virStreamRecvFlags in order to handle being able to
stop reading from the stream so that the consumer can generate a "hole"
in stream target. Generation of a hole replaces the need to receive and
handle a sequence of zero bytes for sparse stream targets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 13:03:11 +0000 (15:03 +0200)]
Introduce virStreamRecvHole
This function is basically a counterpart for virStreamSendHole().
If one side of a stream called virStreamSendHole() the other
should call virStreamRecvHole() to get the size of the hole.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
projects / thirdparty / libvirt.git / log
