Florian Weimer [Fri, 10 Dec 2021 04:14:24 +0000 (05:14 +0100)]
nptl: Add one more barrier to nptl/tst-create1
Without the bar_ctor_finish barrier, it was possible that thread2
re-locked user_lock before ctor had a chance to lock it. ctor then
blocked in its locking operation, xdlopen from the main thread
did not return, and thread2 was stuck waiting in bar_dtor:
Matheus Castanho [Tue, 26 Oct 2021 13:44:59 +0000 (10:44 -0300)]
powerpc64[le]: Fix CFI and LR save address for asm syscalls [BZ #28532]
Syscalls based on the assembly templates are missing CFI for r31, which gets
clobbered when scv is used, and info for LR is inaccurate, placed in the wrong
LOC and not using the proper offset. LR was also being saved to the callee's
frame, while the ABI mandates it to be saved to the caller's frame. These are
fixed by this commit.
Florian Weimer [Wed, 24 Nov 2021 07:59:54 +0000 (08:59 +0100)]
nptl: Do not set signal mask on second setjmp return [BZ #28607]
__libc_signal_restore_set was in the wrong place: It also ran
when setjmp returned the second time (after pthread_exit or
pthread_cancel). This is observable with blocked pending
signals during thread exit.
Florian Weimer [Wed, 10 Nov 2021 14:21:37 +0000 (15:21 +0100)]
s390: Use long branches across object boundaries (jgh instead of jh)
Depending on the layout chosen by the linker, the 16-bit displacement
of the jh instruction is insufficient to reach the target label.
Analysis of the linker failure was carried out by Nick Clifton.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
(cherry picked from commit 98966749f2b418825ff2ea496a0ee89fe63d2cc8)
Florian Weimer [Fri, 5 Nov 2021 16:01:24 +0000 (17:01 +0100)]
elf: Earlier missing dynamic segment check in _dl_map_object_from_fd
Separated debuginfo files have PT_DYNAMIC with p_filesz == 0. We
need to check for that before the _dl_map_segments call because
that could attempt to write to mappings that extend beyond the end
of the file, resulting in SIGBUS.
Nikita Popov [Tue, 2 Nov 2021 08:21:42 +0000 (13:21 +0500)]
gconv: Do not emit spurious NUL character in ISO-2022-JP-3 (bug 28524)
Bugfix 27256 has introduced another issue:
In conversion from ISO-2022-JP-3 encoding, it is possible
to force iconv to emit extra NUL character on internal state reset.
To do this, it is sufficient to feed iconv with escape sequence
which switches active character set.
The simplified check 'data->__statep->__count != ASCII_set'
introduced by the aforementioned bugfix picks that case and
behaves as if '\0' character has been queued thus emitting it.
To eliminate this issue, these steps are taken:
* Restore original condition
'(data->__statep->__count & ~7) != ASCII_set'.
It is necessary since bits 0-2 may contain
number of buffered input characters.
* Check that queued character is not NUL.
Similar step is taken for main conversion loop.
Bundled test case follows following logic:
* Try to convert ISO-2022-JP-3 escape sequence
switching active character set
* Reset internal state by providing NULL as input buffer
* Ensure that nothing has been converted.
1. Define DL_RO_DYN_SECTION to initalize bootstrap_map.l_ld_readonly
before calling elf_get_dynamic_info to get dynamic info in bootstrap_map,
2. Define a single
static inline bool
dl_relocate_ld (const struct link_map *l)
{
/* Don't relocate dynamic section if it is readonly */
return !(l->l_ld_readonly || DL_RO_DYN_SECTION);
}
H.J. Lu [Thu, 16 Sep 2021 15:15:29 +0000 (08:15 -0700)]
ld.so: Replace DL_RO_DYN_SECTION with dl_relocate_ld [BZ #28340]
We can't relocate entries in dynamic section if it is readonly:
1. Add a l_ld_readonly field to struct link_map to indicate if dynamic
section is readonly and set it based on p_flags of PT_DYNAMIC segment.
2. Replace DL_RO_DYN_SECTION with dl_relocate_ld to decide if dynamic
section should be relocated.
3. Remove DL_RO_DYN_TEMP_CNT.
4. Don't use a static dynamic section to make readonly dynamic section
in vDSO writable.
5. Remove the temp argument from elf_get_dynamic_info.
Szabolcs Nagy [Wed, 15 Sep 2021 14:16:19 +0000 (15:16 +0100)]
elf: Avoid deadlock between pthread_create and ctors [BZ #28357]
The fix for bug 19329 caused a regression such that pthread_create can
deadlock when concurrent ctors from dlopen are waiting for it to finish.
Use a new GL(dl_load_tls_lock) in pthread_create that is not taken
around ctors in dlopen.
The new lock is also used in __tls_get_addr instead of GL(dl_load_lock).
The new lock is held in _dl_open_worker and _dl_close_worker around
most of the logic before/after the init/fini routines. When init/fini
routines are running then TLS is in a consistent, usable state.
In _dl_open_worker the new lock requires catching and reraising dlopen
failures that happen in the critical section.
The new lock is reinitialized in a fork child, to keep the existing
behaviour and it is kept recursive in case malloc interposition or TLS
access from signal handlers can retake it. It is not obvious if this
is necessary or helps, but avoids changing the preexisting behaviour.
The new lock may be more appropriate for dl_iterate_phdr too than
GL(dl_load_write_lock), since TLS state of an incompletely loaded
module may be accessed. If the new lock can replace the old one,
that can be a separate change.
This was found to be due to the kernel overwriting the stack space
allocated by the timex structure. The reason for the overwrite being
that the kernel timex has 64-bit fields and user space code only
allocates enough stack space for timex with 32-bit fields.
On 32-bit systems with TIMESIZE=64 __USE_TIME_BITS64 is not defined.
This causes the timex structure to use 32-bit fields with type
__syscall_slong_t.
This patch adjusts the ifdef condition to allow 32-bit systems with
TIMESIZE=64 to use the 64-bit long long timex definition.
@@ -856,6 +876,11 @@ no more namespaces available for dlmopen()"));
/* See if an error occurred during loading. */
if (__glibc_unlikely (exception.errstring != NULL))
{
+ /* Avoid keeping around a dangling reference to the libc.so link
+ map in case it has been cached in libc_map. */
+ if (!args.libc_already_loaded)
+ GL(dl_ns)[nsid].libc_map = NULL;
+
do_dlopen calls _dl_open with nsid == __LM_ID_CALLER (-2), which calls
dl_open_worker with args.nsid = nsid. dl_open_worker updates args.nsid
if it is __LM_ID_CALLER. After dl_open_worker returns, it is wrong to
use nsid.
Replace nsid with args.nsid after dl_open_worker returns. This fixes
BZ #27609.
Also note that the kernel commit 511ad531afd4090625def4d9aba1f5227bd44b8e
"s390/hwcaps: shorten HWCAP defines" has shortened the prefix of the macros
from "HWCAP_S390_" to "HWCAP_". For compatibility reasons, we do not
change the prefix in public glibc header file.
linux: Revert the use of sched_getaffinity on get_nproc (BZ #28310)
The use of sched_getaffinity on get_nproc and
sysconf (_SC_NPROCESSORS_ONLN) done in 903bc7dcc2acafc40 (BZ #27645)
breaks the top command in common hypervisor configurations and also
other monitoring tools.
The main issue using sched_getaffinity changed the symbols semantic
from system-wide scope of online CPUs to per-process one (which can
be changed with kernel cpusets or book parameters in VM).
This patch reverts mostly of the 903bc7dcc2acafc40, with the
exceptions:
* No more cached values and atomic updates, since they are inherent
racy.
* No /proc/cpuinfo fallback, since /proc/stat is already used and
it would require to revert more arch-specific code.
* The alloca is replace with a static buffer of 1024 bytes.
So the implementation first consult the sysfs, and fallbacks to procfs.
This patch simplifies the memory allocation code and uses the sched
routines instead of reimplement it. This still uses a stack
allocation buffer, so it can be used on malloc initialization code.
Linux currently supports at maximum of 4096 cpus for most architectures:
$ find -iname Kconfig | xargs git grep -A10 -w NR_CPUS | grep -w range
arch/alpha/Kconfig- range 2 32
arch/arc/Kconfig- range 2 4096
arch/arm/Kconfig- range 2 16 if DEBUG_KMAP_LOCAL
arch/arm/Kconfig- range 2 32 if !DEBUG_KMAP_LOCAL
arch/arm64/Kconfig- range 2 4096
arch/csky/Kconfig- range 2 32
arch/hexagon/Kconfig- range 2 6 if SMP
arch/ia64/Kconfig- range 2 4096
arch/mips/Kconfig- range 2 256
arch/openrisc/Kconfig- range 2 32
arch/parisc/Kconfig- range 2 32
arch/riscv/Kconfig- range 2 32
arch/s390/Kconfig- range 2 512
arch/sh/Kconfig- range 2 32
arch/sparc/Kconfig- range 2 32 if SPARC32
arch/sparc/Kconfig- range 2 4096 if SPARC64
arch/um/Kconfig- range 1 1
arch/x86/Kconfig-# [NR_CPUS_RANGE_BEGIN ... NR_CPUS_RANGE_END] range.
arch/x86/Kconfig- range NR_CPUS_RANGE_BEGIN NR_CPUS_RANGE_END
arch/xtensa/Kconfig- range 2 32
With x86 supporting 8192:
arch/x86/Kconfig
976 config NR_CPUS_RANGE_END
977 int
978 depends on X86_64
979 default 8192 if SMP && CPUMASK_OFFSTACK
980 default 512 if SMP && !CPUMASK_OFFSTACK
981 default 1 if !SMP
So using a maximum of 32k cpu should cover all cases (and I would
expect once we start to have many more CPUs that Linux would provide
a more straightforward way to query for such information).
A test is added to check if sched_getaffinity can successfully return
with large buffers.
This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Florian Weimer [Fri, 1 Oct 2021 16:16:41 +0000 (18:16 +0200)]
nptl: pthread_kill must send signals to a specific thread [BZ #28407]
The choice between the kill vs tgkill system calls is not just about
the TID reuse race, but also about whether the signal is sent to the
whole process (and any thread in it) or to a specific thread.
This was caught by the openposix test suite:
LTP: openposix test suite - FAIL: SIGUSR1 is member of new thread pendingset.
<https://gitlab.com/cki-project/kernel-tests/-/issues/764>
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit eae81d70574e923ce3c59078b8df857ae192efa6)
Florian Weimer [Fri, 1 Oct 2021 16:16:41 +0000 (18:16 +0200)]
support: Add check for TID zero in support_wait_for_thread_exit
Some kernel versions (observed with kernel 5.14 and earlier) can list
"0" entries in /proc/self/task. This happens when a thread exits
while the task list is being constructed. Treat this entry as not
present, like the proposed kernel patch does:
[PATCH] procfs: Do not list TID 0 in /proc/<pid>/task
<https://lore.kernel.org/all/8735pn5dx7.fsf@oldenburg.str.redhat.com/>
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 176c88f5214d8107d330971cbbfbbba5186a111f)
nptl: Avoid setxid deadlock with blocked signals in thread exit [BZ #28361]
As part of the fix for bug 12889, signals are blocked during
thread exit, so that application code cannot run on the thread that
is about to exit. This would cause problems if the application
expected signals to be delivered after the signal handler revealed
the thread to still exist, despite pthread_kill can no longer be used
to send signals to it. However, glibc internally uses the SIGSETXID
signal in a way that is incompatible with signal blocking, due to the
way the setxid handshake delays thread exit until the setxid operation
has completed. With a blocked SIGSETXID, the handshake can never
complete, causing a deadlock.
As a band-aid, restore the previous handshake protocol by not blocking
SIGSETXID during thread exit.
The new test sysdeps/pthread/tst-pthread-setuid-loop.c is based on
a downstream test by Martin Osvald.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2849e2f53311b66853cb5159b64cba2bddbfb854)
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
nptl: Fix type of pthread_mutexattr_getrobust_np, pthread_mutexattr_setrobust_np (bug 28036)
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit f3e664563361dc17530113b3205998d1f19dc4d9)
nptl: pthread_kill needs to return ESRCH for old programs (bug 19193)
The fix for bug 19193 breaks some old applications which appear
to use pthread_kill to probe if a thread is still running, something
that is not supported by POSIX.
posix: Fix attribute access mode on getcwd [BZ #27476]
There is a GNU extension that allows to call getcwd(NULL, >0). It is
described in the documentation, but also directly in the unistd.h
header, just above the declaration.
Therefore the attribute access mode added in commit 06febd8c6705
is not correct. Drop it.
Joseph Myers [Tue, 14 Sep 2021 14:19:24 +0000 (14:19 +0000)]
Add MADV_POPULATE_READ and MADV_POPULATE_WRITE from Linux 5.14 to bits/mman-linux.h
Linux 5.14 adds constants MADV_POPULATE_READ and MADV_POPULATE_WRITE
(with the same values on all architectures). Add these to glibc's
bits/mman-linux.h.
Joseph Myers [Tue, 14 Sep 2021 13:51:58 +0000 (13:51 +0000)]
Update kernel version to 5.14 in tst-mman-consts.py
This patch updates the kernel version in the test tst-mman-consts.py
to 5.14. (There are no new MAP_* constants covered by this test in
5.14 that need any other header changes.)
Joseph Myers [Wed, 8 Sep 2021 12:42:06 +0000 (12:42 +0000)]
Update syscall lists for Linux 5.14
Linux 5.14 has two new syscalls, memfd_secret (on some architectures
only) and quotactl_fd. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Fix failing nss/tst-nss-files-hosts-long with local resolver
When a local resolver like unbound is listening on the IPv4 loopback
address 127.0.0.1, the nss/tst-nss-files-hosts-long test fails. This is
due to:
- the default resolver in the absence of resolv.conf being 127.0.0.1
- the default DNS NSS database configuration in the absence of
nsswitch.conf being 'hosts: dns [!UNAVAIL=return] file'
This causes the requests for 'test4' and 'test6' to first be sent to the
local resolver, which responds with NXDOMAIN in the likely case those
records do no exist. In turn that causes the access to /etc/hosts to be
skipped, which is the purpose of that test.
Fix that by providing a simple nsswitch.conf file forcing access to
/etc/hosts for that test. I have tested that the only changed result in
the testsuite is that test.
iconvconfig: Fix behaviour with --prefix [BZ #28199]
The consolidation of configuration parsing broke behaviour with
--prefix, where the prefix bled into the modules cache. Accept a
prefix which, when non-NULL, is prepended to the path when looking for
configuration files but only the original directory is added to the
modules cache.
This has no effect on the codegen of gconv_conf since it passes NULL.
Reported-by: Patrick McCarty <patrick.mccarty@intel.com> Reported-by: Michael Hudson-Doyle <michael.hudson@canonical.com> Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
(cherry picked from commit 43cea6d5652b6b9e61ac6ecc69419c909b504f47)
nptl: Fix race between pthread_kill and thread exit (bug 12889)
A new thread exit lock and flag are introduced. They are used to
detect that the thread is about to exit or has exited in
__pthread_kill_internal, and the signal is not sent in this case.
The test sysdeps/pthread/tst-pthread_cancel-select-loop.c is derived
from a downstream test originally written by Marek Polacek.
nptl: pthread_kill, pthread_cancel should not fail after exit (bug 19193)
This closes one remaining race condition related to bug 12889: if
the thread already exited on the kernel side, returning ESRCH
is not correct because that error is reserved for the thread IDs
(pthread_t values) whose lifetime has ended. In case of a
kernel-side exit and a valid thread ID, no signal needs to be sent
and cancellation does not have an effect, so just return 0.
sysdeps/pthread/tst-kill4.c triggers undefined behavior and is
removed with this commit.
Jiaxun Yang [Tue, 7 Sep 2021 05:31:42 +0000 (13:31 +0800)]
MIPS: Setup errno for {f,l,}xstat
{f,l,}xstat stub for MIPS is using INTERNAL_SYSCALL
to do xstat syscall for glibc ver, However it leaves
errno untouched and thus giving bad errno output.
Setup errno properly when syscall returns non-zero.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 66016ec8aeefd40e016d7040d966484c764b0e9c)
Nikita Popov [Thu, 12 Aug 2021 10:39:50 +0000 (16:09 +0530)]
librt: add test (bug 28213)
This test implements following logic:
1) Create POSIX message queue.
Register a notification with mq_notify (using NULL attributes).
Then immediately unregister the notification with mq_notify.
Helper thread in a vulnerable version of glibc
should cause NULL pointer dereference after these steps.
2) Once again, register the same notification.
Try to send a dummy message.
Test is considered successfulif the dummy message
is successfully received by the callback function.
Nikita Popov [Mon, 9 Aug 2021 14:47:34 +0000 (20:17 +0530)]
librt: fix NULL pointer dereference (bug 28213)
Helper thread frees copied attribute on NOTIFY_REMOVED message
received from the OS kernel. Unfortunately, it fails to check whether
copied attribute actually exists (data.attr != NULL). This worked
earlier because free() checks passed pointer before actually
attempting to release corresponding memory. But
__pthread_attr_destroy assumes pointer is not NULL.
So passing NULL pointer to __pthread_attr_destroy will result in
segmentation fault. This scenario is possible if
notification->sigev_notify_attributes == NULL (which means default
thread attributes should be used).
Florian Weimer [Fri, 6 Aug 2021 07:51:38 +0000 (09:51 +0200)]
Linux: Fix fcntl, ioctl, prctl redirects for _TIME_BITS=64 (bug 28182)
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
x86-64: Avoid rep movsb with short distance [BZ #27130]
introduced some regressions on Intel processors without Fast Short REP
MOV (FSRM). Add Avoid_Short_Distance_REP_MOVSB to avoid rep movsb with
short distance only on Intel processors with FSRM. bench-memmove-large
on Skylake server shows that cycles of __memmove_evex_unaligned_erms
improves for the following data size:
tests: use xmalloc to allocate implementation array
The benchmark and tests must fail in case of allocation failure in the
implementation array. Also annotate the x* allocators in support.h so
that the compiler has more information about them.
Tell the compiler that xmalloc family of allocators always return
non-NULL. xrealloc in locale/programs also always returns non-NULL,
but that conflicts with default realloc behaviour and that of xrealloc
in libsupport, so keep it as is for now and resolve the differences
later.
mcheck and malloc-check no longer work with static binaries, so drop
those tests.
Reported-by: Samuel Thibault <samuel.thibault@gnu.org> Tested-by: Samuel Thibault <samuel.thibault@gnu.org> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
manual: Document unsupported cases for interposition
These functions call the core allocator functions (realloc and malloc
respectively) and are hence guaranteed to allocate memory using the
correct functions when multiple allocators are interposed. Having
these functions interposed in one allocator and not another may result
in confusion, hence discourage interposing them altogether.
H.J. Lu [Sat, 5 Jun 2021 13:42:20 +0000 (06:42 -0700)]
x86: Install <bits/platform/x86.h> [BZ #27958]
1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes
<bits/platform/x86.h>.
2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the
processor has the feature.
3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the
feature is active. There may be other preconditions, like sufficient
stack space or further setup for AMX, which must be satisfied before the
feature can be used.
Samuel Thibault [Thu, 22 Jul 2021 18:29:57 +0000 (18:29 +0000)]
hurd: Fix glob lstat compatibility
84f7ce84474c ("posix: Add glob64 with 64-bit time_t support") replaced
GLOB_NO_LSTAT with defining GLOB_LSTAT and GLOB_LSTAT64, but the posix
and gnu versions of the change were missing in the commit.
Make malloc hooks symbols compat-only so that new applications cannot
link against them and remove the declarations from the API. Also
remove the unused malloc-hooks.h.
Finally, mark all symbols in libc_malloc_debug.so as compat so that
the library cannot be linked against.
Add a note about the deprecation in NEWS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
The malloc-check debugging feature is tightly integrated into glibc
malloc, so thanks to an idea from Florian Weimer, much of the malloc
implementation has been moved into libc_malloc_debug.so to support
malloc-check. Due to this, glibc malloc and malloc-check can no
longer work together; they use altogether different (but identical)
structures for heap management. This should not make a difference
though since the malloc check hook is not disabled anywhere.
malloc_set_state does, but it does so early enough that it shouldn't
cause any problems.
The malloc check tunable is now in the debug DSO and has no effect
when the DSO is not preloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Wean mtrace away from the malloc hooks and move them into the debug
DSO. Split the API away from the implementation so that we can add
the API to libc.so as well as libc_malloc_debug.so, with the libc
implementations being empty.
Update localplt data since memalign no longer has any callers after
this change.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Now that mcheck no longer needs to check __malloc_initialized (and no
other third party hook can since the symbol is not exported), make the
variable boolean and static so that it is used strictly within malloc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Split the mcheck implementation into the debugging hooks and API so
that the API can be replicated in libc and libc_malloc_debug.so. The
libc APIs always result in failure.
The mcheck implementation has also been moved entirely into
libc_malloc_debug.so and with it, all of the hook initialization code
can now be moved into the debug library. Now the initialization can
be done independently of libc internals.
With this patch, libc_malloc_debug.so can no longer be used with older
libcs, which is not its goal anyway. tst-vfork3 breaks due to this
since it spawns shell scripts, which in turn execute using the system
glibc. Move the test to tests-container so that only the built glibc
is used.
This move also fixes bugs in the mcheck version of memalign and
realloc, thus allowing removal of the tests from tests-mcheck
exclusion list.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Make the __morecore and __default_morecore symbols compat-only and
remove their declarations from the API. Also, include morecore.c
directly into malloc.c; this should ideally get merged into malloc in
a future cleanup.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove __after_morecore_hook from the API and finalize the symbol so
that it can no longer be used in new applications. Old applications
using __after_morecore_hook will find that their hook is no longer
called.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Make mcheck tests conditional on GLIBC_2.23 or earlier
Targets with base versions of 2.24 or later won't have
__malloc_initialize_hook because of which the tests will essentially
be the same as the regular malloc tests. Avoid running them instead
and save time.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
ARC: fp: (micro)optimize FPU_STATUS read by eliding FWE bit clearing
Any FPU_STATUS write needs setting the FWE bit (31) whcih just provides
a "control signal" to enable explicit write (vs. the side-effect of FPU
instructions). However this bit is RAZ and write-only, thus effectively
never stored in FPU_STATUS register. Thus when reading the register
there is no need to clear it. This shaves off a BCLR instruction from
the fe*exceptino family of functions and while no big deal still makes
sense to do.
This came up when debugging a race in math/test-fenv-tls [1]
elf: Fix tst-cpu-features-cpuinfo on some AMD systems (BZ #28090)
The SSBD feature is implemented in 2 different ways on AMD processors:
newer systems (Zen3) provides AMD_SSBD (function 8000_0008, EBX[24]),
while older system provides AMD_VIRT_SSBD (function 8000_0008, EBX[25]).
However for AMD_VIRT_SSBD, kernel shows both 'ssdb' and 'virt_ssdb' on
/proc/cpuinfo; while for AMD_SSBD only 'ssdb' is provided.
This now check is AMD_SSBD is set to check for 'ssbd', otherwise check
if AMD_VIRT_SSDB is set to check for 'virt_ssbd'.
projects / thirdparty / glibc.git / log
