mm/shmem: hold shmem_swaplist spinlock (not mutex) much less
A flamegraph (from an MGLRU load) showed shmem_writeout()'s use of the
global shmem_swaplist_mutex worryingly hot: improvement is long overdue.
3.1 commit 6922c0c7abd3 ("tmpfs: convert shmem_writepage and enable swap")
apologized for extending shmem_swaplist_mutex across add_to_swap_cache(),
and hoped to find another way: yes, there may be lots of work to allocate
radix tree nodes in there. Then 6.15 commit b487a2da3575 ("mm, swap:
simplify folio swap allocation") will have made it worse, by moving
shmem_writeout()'s swap allocation under that mutex too (but the worrying
flamegraph was observed even before that change).
There's a useful comment about pagelock no longer protecting from eviction
once moved to swap cache: but it's good till
shmem_delete_from_page_cache() replaces page pointer by swap entry, so
move the swaplist add between them.
We would much prefer to take the global lock once per inode than once per
page: given the possible races with shmem_unuse() pruning when !swapped
(and other tasks racing to swap other pages out or in), try the swaplist
add whenever swapped was incremented from 0 (but inode may already be on
the list - only unuse and evict bother to remove it).
This technique is more subtle than it looks (we're avoiding the very lock
which would make it easy), but works: whereas an unlocked list_empty()
check runs a risk of the inode being unqueued and left off the swaplist
forever, swapoff only completing when the page is faulted in or removed.
The need for a sleepable mutex went away in 5.1 commit b56a2d8af914 ("mm:
rid swapoff of quadratic complexity"): a spinlock works better now.
This commit is certain to take shmem_swaplist_mutex out of contention, and
has been seen to make a practical improvement (but there is likely to have
been an underlying issue which made its contention so visible).
Link: https://lkml.kernel.org/r/87beaec6-a3b0-ce7a-c892-1e1e5bd57aa3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: David Rientjes <rientjes@google.com> Reviewed-by: Kairui Song <kasong@tencent.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:56:00 +0000 (17:56 +0100)]
tools/testing/selftests: extend mremap_test to test multi-VMA mremap
Now that we have added the ability to move multiple VMAs at once, assert
that this functions correctly, both overwriting VMAs and moving backwards
and forwards with merge and VMA invalidation.
Additionally assert that page tables are correctly propagated by setting
random data and reading it back.
Link: https://lkml.kernel.org/r/139074a24a011ca4ed52498a7fa2080024b43917.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:59 +0000 (17:55 +0100)]
mm/mremap: permit mremap() move of multiple VMAs
Historically we've made it a uAPI requirement that mremap() may only
operate on a single VMA at a time.
For instances where VMAs need to be resized, this makes sense, as it
becomes very difficult to determine what a user actually wants should they
indicate a desire to expand or shrink the size of multiple VMAs (truncate?
Adjust sizes individually? Some other strategy?).
However, in instances where a user is moving VMAs, it is restrictive to
disallow this.
This is especially the case when anonymous mapping remap may or may not be
mergeable depending on whether VMAs have or have not been faulted due to
anon_vma assignment and folio index alignment with vma->vm_pgoff.
Often this can result in surprising impact where a moved region is
faulted, then moved back and a user fails to observe a merge from
otherwise compatible, adjacent VMAs.
This change allows such cases to work without the user having to be
cognizant of whether a prior mremap() move or other VMA operations has
resulted in VMA fragmentation.
We only permit this for mremap() operations that do NOT change the size of
the VMA and DO specify MREMAP_MAYMOVE | MREMAP_FIXED.
Should no VMA exist in the range, -EFAULT is returned as usual.
If a VMA move spans a single VMA - then there is no functional change.
Otherwise, we place additional requirements upon VMAs:
* They must not have a userfaultfd context associated with them - this
requires dropping the lock to notify users, and we want to perform the
operation with the mmap write lock held throughout.
* If file-backed, they cannot have a custom get_unmapped_area handler -
this might result in MREMAP_FIXED not being honoured, which could result
in unexpected positioning of VMAs in the moved region.
There may be gaps in the range of VMAs that are moved:
X Y X Y
<---> <-> <---> <->
|-------| |-----| |-----| |-------| |-----| |-----|
| A | | B | | C | ---> | A' | | B' | | C' |
|-------| |-----| |-----| |-------| |-----| |-----|
addr new_addr
The move will preserve the gaps between each VMA.
Note that any failures encountered will result in a partial move. Since
an mremap() can fail at any time, this might result in only some of the
VMAs being moved.
Note that failures are very rare and typically require an out of a memory
condition or a mapping limit condition to be hit, assuming the VMAs being
moved are valid.
We don't try to assess ahead of time whether VMAs are valid according to
the multi VMA rules, as it would be rather unusual for a user to mix
uffd-enabled VMAs and/or VMAs which map unusual driver mappings that
specify custom get_unmapped_area() handlers in an aggregate operation.
So we optimise for the far, far more likely case of the operation being
entirely permissible.
In the case of the move of a single VMA, the above conditions are
permitted. This makes the behaviour identical for a single VMA as before.
Link: https://lkml.kernel.org/r/8cab2f2c202c4208bdfdb562635748bea6eb37bf.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:58 +0000 (17:55 +0100)]
mm/mremap: clean up mlock populate behaviour
When an mlock()'d VMA is expanded, we need to populate the expanded region
to maintain the contract that all mlock()'d memory is present (albeit -
with some period after mmap unlock where the expanded part of the mapping
remains unfaulted).
The current implementation is very unclear, so make it absolutely explicit
under what circumstances we do this.
Link: https://lkml.kernel.org/r/2358b0006baa9cab83db4259817794f16fe1992e.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:56 +0000 (17:55 +0100)]
mm/mremap: check remap conditions earlier
When we expand or move a VMA, this requires a number of additional checks
to be performed.
Make it really obvious under what circumstances these checks must be
performed and aggregate all the checks in one place by invoking this in
check_prep_vma().
We have to adjust the checks to account for shrink + move operations by
checking new_len <= old_len rather than new_len == old_len.
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:55 +0000 (17:55 +0100)]
mm/mremap: use an explicit uffd failure path for mremap
Right now it appears that the code is relying upon the returned
destination address having bits outside PAGE_MASK to indicate whether an
error value is specified, and decrementing the increased refcount on the
uffd ctx if so.
This is not a safe means of determining an error value, so instead, be
specific. It makes far more sense to do so in a dedicated error path, so
add mremap_userfaultfd_fail() for this purpose and use this when an error
arises.
A vm_userfaultfd_ctx is not established until we are at the point where
mremap_userfaultfd_prep() is invoked in copy_vma_and_data(), so this is a
no-op until this happens.
That is - uffd remap notification only occurs if the VMA is actually moved
- at which point a UFFD_EVENT_REMAP event is raised.
No errors can occur after this point currently, though it's certainly not
guaranteed this will always remain the case, and we mustn't rely on this.
However, the reason for needing to handle this case is that, when an error
arises on a VMA move at the point of adjusting page tables, we revert this
operation, and propagate the error.
At this point, it is not correct to raise a uffd remap event, and we must
handle it.
This refactoring makes it abundantly clear what we are doing.
We assume vrm->new_addr is always valid, which a prior change made the
case even for mremap() invocations which don't move the VMA, however given
no uffd context would be set up in this case it's immaterial to this
change anyway.
No functional change intended.
Link: https://lkml.kernel.org/r/a70e8a1f7bce9f43d1431065b414e0f212297297.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:54 +0000 (17:55 +0100)]
mm/mremap: cleanup post-processing stage of mremap
Separate out the uffd bits so it clear's what's happening.
Don't bother setting vrm->mmap_locked after unlocking, because after this
we are done anyway.
The only time we drop the mmap lock is on VMA shrink, at which point
vrm->new_len will be < vrm->old_len and the operation will not be
performed anyway, so move this code out of the if (vrm->mmap_locked)
block.
All addresses returned by mremap() are page-aligned, so the
offset_in_page() check on ret seems only to be incorrectly trying to
detect whether an error occurred - explicitly check for this.
No functional change intended.
Link: https://lkml.kernel.org/r/ebb8f29650b8e343fe98fefc67b3a61a24d1e0f1.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are currently checking some things later, and some things immediately.
Aggregate the checks and avoid ones that need not be made.
Simplify things by aligning lengths immediately. Defer setting the delta
parameter until later, which removes some duplicate code in the hugetlb
case.
We can safely perform the checks moved from mremap_to() to
check_mremap_params() because:
* If we set a new address via vrm_set_new_addr(), then this is guaranteed
to not overlap nor to position the new VMA past TASK_SIZE, so there's no
need to check these later.
* We can simply page align lengths immediately. We do not need to check for
overlap nor TASK_SIZE sanity after hugetlb alignment as this asserts
addresses are huge-aligned, then huge-aligns lengths, rounding down. This
means any existing overlap would have already been caught.
Moving things around like this lays the groundwork for subsequent changes
to permit operations on batches of VMAs.
No functional change intended.
Link: https://lkml.kernel.org/r/c862d625c98b1abd861c406f2bfad8baf3287f83.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 17 Jul 2025 16:55:51 +0000 (17:55 +0100)]
mm/mremap: perform some simple cleanups
Patch series "mm/mremap: permit mremap() move of multiple VMAs", v4.
Historically we've made it a uAPI requirement that mremap() may only
operate on a single VMA at a time.
For instances where VMAs need to be resized, this makes sense, as it
becomes very difficult to determine what a user actually wants should they
indicate a desire to expand or shrink the size of multiple VMAs (truncate?
Adjust sizes individually? Some other strategy?).
However, in instances where a user is moving VMAs, it is restrictive to
disallow this.
This is especially the case when anonymous mapping remap may or may not be
mergeable depending on whether VMAs have or have not been faulted due to
anon_vma assignment and folio index alignment with vma->vm_pgoff.
Often this can result in surprising impact where a moved region is faulted,
then moved back and a user fails to observe a merge from otherwise
compatible, adjacent VMAs.
This change allows such cases to work without the user having to be
cognizant of whether a prior mremap() move or other VMA operations has
resulted in VMA fragmentation.
In order to do this, this series performs a large amount of refactoring,
most pertinently - grouping sanity checks together, separately those that
check input parameters and those relating to VMAs.
we also simplify the post-mmap lock drop processing for uffd and mlock()'d
VMAs.
With this done, we can then fairly straightforwardly implement this
functionality.
This works exclusively for mremap() invocations which specify
MREMAP_FIXED. It is not compatible with VMAs which use userfaultfd, as the
notification of the userland fault handler would require us to drop the
mmap lock.
It is also not compatible with file-backed mappings with customised
get_unmapped_area() handlers as these may not honour MREMAP_FIXED.
The input and output addresses ranges must not overlap. We carefully
account for moves which would result in VMA iterator invalidation.
While there can be gaps between VMAs in the input range, there can be no
gap before the first VMA in the range.
This patch (of 10):
We const-ify the vrm flags parameter to indicate this will never change.
We rename resize_is_valid() to remap_is_valid(), as this function does not
only apply to cases where we resize, so it's simply confusing to refer to
that here.
We remove the BUG() from mremap_at(), as we should not BUG() unless we are
certain it'll result in system instability.
We rename vrm_charge() to vrm_calc_charge() to make it clear this simply
calculates the charged number of pages rather than actually adjusting any
state.
We update the comment for vrm_implies_new_addr() to explain that
MREMAP_DONTUNMAP does not require a set address, but will always be moved.
Additionally consistently use 'res' rather than 'ret' for result values.
Lorenzo Stoakes [Mon, 14 Jul 2025 13:58:39 +0000 (14:58 +0100)]
mm/vma: refactor vma_modify_flags_name() to vma_modify_name()
The single instance in which we use this function doesn't actually need to
change VMA flags, so remove this parameter and update the caller
accordingly.
mm/mglru: stop try_to_inc_min_seq() if min_seq[type] has not increased
In try_to_inc_min_seq(), if min_seq[type] has not increased. In other
words, min_seq[type] == lrugen->min_seq[type]. Then we should return
directly to avoid unnecessary overhead later.
Corollary: If min_seq[type] of both anonymous and file is not increased,
try_to_inc_min_seq() will fail.
Proof:
It is known that min_seq[type] has not increased, that is, min_seq[type]
is equal to lrugen->min_seq[type], then the following:
case 1: min_seq[type] has not been reassigned and changed before
judgment min_seq[type] <= lrugen->min_seq[type].
Then the subsequent min_seq[type] <= lrugen->min_seq[type] judgment
will always be true.
case 2: min_seq[type] is reassigned to seq, before judgment
min_seq[type] <= lrugen->min_seq[type].
Then at least the condition of min_seq[type] > seq must be met
before min_seq[type] will be reassigned to seq.
That is to say, before the reassignment, lrugen->min_seq[type] > seq
is met, and then min_seq[type] = seq.
Then the following min_seq[type](seq) <= lrugen->min_seq[type] judgment
is always true.
Therefore, in try_to_inc_min_seq(), If min_seq[type] of both anonymous
and file is not increased, we can return false directly to avoid
unnecessary overhead.
Link: https://lkml.kernel.org/r/20250703023946.65315-1-jiahao.kernel@gmail.com Signed-off-by: Hao Jia <jiahao1@lixiang.com> Suggested-by: Yuanchu Xie <yuanchu@google.com> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kinsey Ho <kinseyho@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/page_owner: convert set_page_owner_migrate_reason() to folios
Both callers of set_page_owner_migrate_reason() use folios. Convert the
function to take a folio directly and move the &folio->page conversion
inside __set_page_owner_migrate_reason().
Link: https://lkml.kernel.org/r/20250711145910.90135-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/memfd: replace deprecated strcpy() with memcpy() in alloc_name()
strcpy() is deprecated; use memcpy() instead.
Not copying the NUL terminator is safe because strncpy_from_user() would
overwrite it anyway by appending uname to the destination buffer at index
MFD_NAME_PREFIX_LEN.
SeongJae Park [Sat, 12 Jul 2025 19:50:14 +0000 (12:50 -0700)]
mm/damon/core: destroy targets when kdamond_fn() finish
When kdamond_fn() completes, the targets are kept. Those are kept to let
callers do additional cleanups if they need. There are no such additional
cleanups though. DAMON sysfs interface deallocates those in
before_terminate() callback, to reduce unnecessary memory usage, for
[f]vaddr use case. Just destroy the targets for every case in the core
layer. This saves more memory and simplifies the logic.
The function was introduced for putting pids and deallocating unnecessary
targets. Hence it is called before damon_destroy_ctx(). Now vaddr puts
pid for each target destruction (cleanup_target()). damon_destroy_ctx()
deallocates the targets anyway. So damon_sysfs_destroy_targets() has no
reason to exist. Remove it.
SeongJae Park [Sat, 12 Jul 2025 19:50:12 +0000 (12:50 -0700)]
mm/damon/vaddr: put pid in cleanup_target()
Implement cleanup_target() callback for [f]vaddr, which calls put_pid()
for each target that will be destroyed. Also remove redundant put_pid()
calls in core, sysfs and sample modules, which were required to be done
redundantly due to the lack of such self cleanup in vaddr.
SeongJae Park [Sat, 12 Jul 2025 19:50:11 +0000 (12:50 -0700)]
mm/damon/core: add cleanup_target() ops callback
Some DAMON operation sets may need additional cleanup per target. For
example, [f]vaddr need to put pids of each target. Each user and core
logic is doing that redundantly. Add another DAMON ops callback that will
be used for doing such cleanups in operations set layer.
SeongJae Park [Sat, 12 Jul 2025 19:50:10 +0000 (12:50 -0700)]
mm/damon/core: do not call ops.cleanup() when destroying targets
damon_operations.cleanup() is documented to be called for kdamond
termination, but also being called for targets destruction, which is done
for any damon_ctx destruction. Nobody is using the callback for now,
though. Remove the cleanup() call under the destruction.
SeongJae Park [Sat, 12 Jul 2025 19:50:07 +0000 (12:50 -0700)]
mm/damon/lru_sort: use damon_call() repeat mode instead of damon_callback
DAMON_LRU_SORT uses damon_callback for periodically reading and writing
DAMON internal data and parameters. Use its alternative, damon_call()
repeat mode.
SeongJae Park [Sat, 12 Jul 2025 19:50:06 +0000 (12:50 -0700)]
mm/damon/reclaim: use damon_call() repeat mode instead of damon_callback
DAMON_RECLAIM uses damon_callback for periodically reading and writing
DAMON internal data and parameters. Use its alternative, damon_call()
repeat mode.
SeongJae Park [Sat, 12 Jul 2025 19:50:04 +0000 (12:50 -0700)]
mm/damon/core: introduce repeat mode damon_call()
damon_call() can be useful for reading or writing DAMON internal data for
one time. A common pattern of DAMON core usage from DAMON modules is
doing such reads and writes repeatedly, for example, to periodically
update the DAMOS stats. To do that with damon_call(), callers should call
damon_call() repeatedly, with their own delay loop. Each caller doing
that is repetitive. Introduce a repeat mode damon_call(). Callers can
use the mode by setting a new field in damon_call_control. If the mode is
turned on, damon_call() returns success immediately, and DAMON repeats
invoking the callback function inside the kdamond main loop.
SeongJae Park [Sat, 12 Jul 2025 19:50:03 +0000 (12:50 -0700)]
mm/damon: accept parallel damon_call() requests
Patch series "mm/damon: remove damon_callback".
damon_callback was the only way for communicating with DAMON for contexts
running on its worker thread. The interface is flexible and simple. But
as DAMON evolves with more features, damon_callback has become somewhat
too old. With runtime parameters update, for example, its lack of
synchronization support was found to be inconvenient. Arguably it is also
not easy to use correctly since the callers should understand when each
callback is called, and implication of the return values from the
callbacks.
To replace it, damon_call() and damos_walk() are introduced. And those
replaced a few damon_callback use cases. Some use cases of damon_callback
such as parallel or repetitive DAMON internal data reading and additional
cleanups cannot simply be replaced by damon_call() and damos_walk(),
though.
To allow those replaceable, extend damon_call() for parallel and/or
repeated callbacks and modify the core/ops layers for additional resources
cleanup. With the updates, replace the remaining damon_callback usages
and finally say goodbye to damon_callback.
This patch (of 14):
Calling damon_call() while it is serving for another parallel thread
immediately fails with -EBUSY. The caller should call it again, later.
Each caller implementing such retry logic would be redundant. Accept
parallel damon_call() requests and do the wait instead of the caller.
Chi Zhiling [Thu, 10 Jul 2025 06:04:51 +0000 (14:04 +0800)]
readahead: use folio_nr_pages() instead of shift operation
folio_nr_pages() is faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Link: https://lkml.kernel.org/r/20250710060451.3535957-1-chizhiling@163.com Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds support for allowing proactive reclaim in general on a NUMA
system. A per-node interface extends support for beyond a memcg-specific
interface, respecting the current semantics of memory.reclaim: respecting
aging LRU and not supporting artificially triggering eviction on nodes
belonging to non-bottom tiers.
One of the premises for this is to semantically align as best as possible
with memory.reclaim. During a brief time memcg did support nodemask until 55ab834a86a9 (Revert "mm: add nodes= arg to memory.reclaim"), for which
semantics around reclaim (eviction) vs demotion were not clear, rendering
charging expectations to be broken.
With this approach:
1. Users who do not use memcg can benefit from proactive reclaim. The
memcg interface is not NUMA aware and there are usecases that are
focusing on NUMA balancing rather than workload memory footprint.
2. Proactive reclaim on top tiers will trigger demotion, for which
memory is still byte-addressable. Reclaiming on the bottom nodes will
trigger evicting to swap (the traditional sense of reclaim). This
follows the semantics of what is today part of the aging process on
tiered memory, mirroring what every other form of reclaim does
(reactive and memcg proactive reclaim). Furthermore per-node proactive
reclaim is not as susceptible to the memcg charging problem mentioned
above.
3. Unlike the nodes= arg, this interface avoids confusing semantics,
such as what exactly the user wants when mixing top-tier and low-tier
nodes in the nodemask. Further per-node interface is less exposed to
"free up memory in my container" usecases, where eviction is intended.
4. Users that *really* want to free up memory can use proactive
reclaim on nodes knowingly to be on the bottom tiers to force eviction
in a natural way - higher access latencies are still better than swap.
If compelled, while no guarantees and perhaps not worth the effort,
users could also also potentially follow a ladder-like approach to
eventually free up the memory. Alternatively, perhaps an 'evict'
option could be added to the parameters for both memory.reclaim and
per-node interfaces to force this action unconditionally.
[akpm@linux-foundation.org: user_proactive_reclaim(): return -EBUSY on PGDAT_RECLAIM_LOCKED contention, per Roman]
[dave@stgolabs.net: memcg && node is also a bogus case, per Shakeel] Link: https://lkml.kernel.org/r/20250717235604.2atyx2aobwowpge3@offworld Link: https://lkml.kernel.org/r/20250623185851.830632-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Davidlohr Bueso [Mon, 23 Jun 2025 18:58:50 +0000 (11:58 -0700)]
mm/vmscan: make __node_reclaim() more generic
As this will be called from non page allocator paths for proactive
reclaim, allow users to pass the sc and nr of pages, and adjust the return
value as well. No change in semantics.
Link: https://lkml.kernel.org/r/20250623185851.830632-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Davidlohr Bueso [Mon, 23 Jun 2025 18:58:48 +0000 (11:58 -0700)]
mm/vmscan: respect psi_memstall region in node reclaim
Patch series "mm: per-node proactive reclaim", v2.
This adds support for allowing proactive reclaim in general on a NUMA
system. A per-node interface extends support for beyond a memcg-specific
interface, respecting the current semantics of memory.reclaim: respecting
aging LRU and not supporting artificially triggering eviction on nodes
belonging to non-bottom tiers.
One of the premises for this is to semantically align as best as possible
with memory.reclaim. During a brief time memcg did support nodemask until 55ab834a86a9 (Revert "mm: add nodes= arg to memory.reclaim"), for which
semantics around reclaim (eviction) vs demotion were not clear, rendering
charging expectations to be broken.
With this approach:
1. Users who do not use memcg can benefit from proactive reclaim.
2. Proactive reclaim on top tiers will trigger demotion, for which
memory is still byte-addressable. Reclaiming on the bottom nodes will
trigger evicting to swap (the traditional sense of reclaim). This
follows the semantics of what is today part of the aging process on
tiered memory, mirroring what every other form of reclaim does
(reactive and memcg proactive reclaim). Furthermore per-node proactive
reclaim is not as susceptible to the memcg charging problem mentioned
above.
3. Unlike memcg, there should be no surprises of callers expecting
reclaim but instead got a demotion. Essentially relying on behavior of
shrink_folio_list() after 6b426d071419 ("mm: disable top-tier fallback
to reclaim on proactive reclaim"), without the expectations of
try_to_free_mem_cgroup_pages().
4. Unlike the nodes= arg, this interface avoids confusing semantics,
such as what exactly the user wants when mixing top-tier and low-tier
nodes in the nodemask. Further per-node interface is less exposed to
"free up memory in my container" usecases, where eviction is intended.
5. Users that *really* want to free up memory can use proactive
reclaim on nodes knowingly to be on the bottom tiers to force eviction
in a natural way - higher access latencies are still better than swap.
If compelled, while no guarantees and perhaps not worth the effort,
users could also also potentially follow a ladder-like approach to
eventually free up the memory. Alternatively, perhaps an 'evict'
option could be added to the parameters for both memory.reclaim and
per-node interfaces to force this action unconditionally.
mm/damon/vaddr: apply filters in migrate_{hot/cold}
The paddr versions of migrate_{hot/cold} filter out folios from migration
based on the scheme's filters. This patch does the same for the vaddr
versions of those schemes.
The filtering code is mostly the same for the paddr and vaddr versions.
The exception is the young filter. paddr determines if a page is young by
doing a folio rmap walk to find the page table entries corresponding to
the folio. However, vaddr schemes have easier access to the page tables,
so we add some logic to avoid the extra work.
Link: https://lkml.kernel.org/r/20250709005952.17776-14-bijan311@gmail.com Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/damon: move folio filtering from paddr to ops-common
This patch moves damos_pa_filter_match and the functions it calls to
ops-common, renaming it to damos_folio_filter_match. Doing so allows us
to share the filtering logic for the vaddr version of the
migrate_{hot,cold} schemes.
Link: https://lkml.kernel.org/r/20250709005952.17776-13-bijan311@gmail.com Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/damon/vaddr: use damos->migrate_dests in migrate_{hot,cold}
damos->migrate_dests provides a list of nodes the migrate_{hot,cold}
actions should migrate to, as well as the weights which specify the ratio
pages should be migrated to each destination node.
This patch interleaves pages in the migrate_{hot,cold} actions according
to the information provided in damos->migrate_dests if it is used. The
interleaving algorithm used is similar to the one used in
weighted_interleave_nid(). If damos->migration_dests is not provided, the
actions migrate pages to the node specified in damos->target_nid as
before.
Link: https://lkml.kernel.org/r/20250709005952.17776-12-bijan311@gmail.com Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/damon/vaddr: add vaddr versions of migrate_{hot,cold}
migrate_{hot,cold} are paddr schemes that are used to migrate hot/cold
data to a specified node. However, these schemes are only available when
doing physical address monitoring. This patch adds an implementation for
them virtual address monitoring as well.
Link: https://lkml.kernel.org/r/20250709005952.17776-10-bijan311@gmail.com Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/damon: move migration helpers from paddr to ops-common
This patch moves the damon_pa_migrate_pages function along with its
corresponding helper functions from paddr to ops-common. The function
prefix of "damon_pa_" was also changed to just "damon_" accordingly.
This patch will allow page migration to be available to vaddr schemes as
well as paddr schemes.
Link: https://lkml.kernel.org/r/20250709005952.17776-9-bijan311@gmail.com Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS_MIGRATE_{HOT,COLD} can have multiple action destinations and their
weights. Implement sysfs directory named 'dests' under each scheme
directory to let DAMON sysfs ABI users utilize the feature. The interface
is similar to other multiple parameters directory like kdamonds or
filters. The directory contains only nr_dests file initially. Writing a
number of desired destinations to nr_dests creates directories of the
number. Each of the created directories has two files named id and
weight. Users can then write the destination's identifier (node id in
case of DAMOS_MIGRATE_*) and weight to the files.
Link: https://lkml.kernel.org/r/20250709005952.17776-4-bijan311@gmail.com Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Bijan Tabatabai <bijantabatab@micron.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Wed, 9 Jul 2025 00:59:32 +0000 (19:59 -0500)]
mm/damon/core: add damos->migrate_dests field
Add a new field to 'struct damos', namely migrate_dests, to allow DAMON
API callers specify multiple migration destination nodes and their
weights. Also update 'struct damos' creation and destruction functions
accordingly to initialize the new field and free up the API
caller-allocated buffers on those, respectively.
Link: https://lkml.kernel.org/r/20250709005952.17776-3-bijan311@gmail.com Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Wed, 9 Jul 2025 00:59:31 +0000 (19:59 -0500)]
mm/damon: add struct damos_migrate_dests
Patch series "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold}
actions", v4.
A recent patchset automatically sets the interleave weight for each node
according to the node's maximum bandwidth [1]. In another thread, the
patch set's author, Joshua Hahn, wondered if/how thes weights should be
changed if the bandwidth utilization of the system changes [2].
This patch set adds the mechanism for dynamically changing how application
data is interleaved across nodes while leaving the policy of what the
interleave weights should be to userspace. It does this by having the
migrate_{hot,cold} operating schemes interleave application data according
to the list of migration nodes and weights passed in via the DAMON sysfs
interface. This functionality can be used to dynamically adjust how
folios are interleaved by having a userspace process adjust those weights.
If no specific destination nodes or weights are provided, the
migrate_{hot,cold} actions will only migrate folios to damos->target_nid
as before.
The algorithm used to interleave the folios is similar to the one used for
the weighted interleave mempolicy [3]. It uses the offset from which a
folio is mapped into a VMA to determine the node the folio should be
placed in. This method is convenient because for a given set of
interleave weights, a folio has only one valid node it can be placed in,
limitng the amount of unnecessary data movement. However, finding out how
a folio is mapped inside of a VMA requires a costly rmap walk when using a
paddr scheme. As such, we have decided that this functionality makes more
sense as a vaddr scheme [4]. To this end, this patch set also adds vaddr
versions of the migrate_{hot,cold}.
Motivation
==========
There have been prior discussions about how changing the interleave
weights in response to the system's bandwidth utilization can be
beneficial [2]. However, currently the interleave weights only are
applied when data is allocated. Migrating already allocated pages
according to the dynamically changing weights will better help balance the
bandwidth utilization across nodes.
As a toy example, imagine some application that uses 75% of the local
bandwidth. Assuming sufficient capacity, when running alone, we want to
keep that application's data in local memory. However, if a second
instance of that application begins, using the same amount of bandwidth,
it would be best to interleave the data of both processes to alleviate the
bandwidth pressure from the local node. Likewise, when one of the
processes ends, the data should be moves back to local memory.
We imagine there would be a userspace application that would monitor
system performance characteristics, such as bandwidth utilization or
memory access latency, and uses that information to tune the interleave
weights. Others seem to have come to a similar conclusion in previous
discussions [5]. We are currently working on a userspace program that
does this, but it is not quite ready to be published yet.
After the userspace application tunes the interleave weights, there must
be some mechanism that actually migrates pages to be consistent with those
weights. This patchset is what provides this mechanism.
We believe DAMON is the correct venue for the interleaving mechanism for a
few reasons. First, we noticed that we don't have to migrate all of the
application's pages to improve performance. we just need to migrate the
frequently accessed pages. DAMON's existing hotness traching is very
useful for this. Second, DAMON's quota system can be used to ensure we
are not using too much bandwidth for migrations. Finally, as Ying pointed
out [6], a complete solution must also handle when a memory node is at
capacity. The existing migrate_cold action can be used in conjunction
with the functionality added in this patch set to provide that complete
solution.
Functionality Test
==================
Below is an example of this new functionality in use to confirm that these
patches behave as intended.
In this example, the user starts an application, alloc_data, which
allocates 1GB using the default memory policy (i.e. allocate to local
memory) then sleeps. Afterwards, we start DAMON to interleave the data at
a 1:1 ratio. Using numastat, we show that DAMON has migrated the
application's data to match the new interleave ratio.
For this example, I modified the userspace damo tool [8] to write to the
migration_dest sysfs files. I plan to upstream these changes when these
patches are merged.
$ # Allocate the data initially
$ ./alloc_data 1G &
[1] 6587
$ numastat -c -p alloc_data
Per-node process memory usage (in MBs) for PID 6587 (alloc_data)
Node 0 Node 1 Total
------ ------ -----
Huge 0 0 0
Heap 0 0 0
Stack 0 0 0
Private 1027 0 1027
------- ------ ------ -----
Total 1027 0 1027
$ # Start DAMON to interleave data at a 1:1 ratio
$ cat ./interleave_vaddr.yaml
kdamonds:
- contexts:
- ops: vaddr
addr_unit: null
targets:
- pid: 6587
regions: []
intervals:
sample_us: 500 ms
aggr_us: 5 s
ops_update_us: 20 s
intervals_goal:
access_bp: 0 %
aggrs: '0'
min_sample_us: 0 ns
max_sample_us: 0 ns
nr_regions:
min: '20'
max: '50'
schemes:
- action: migrate_hot
dests:
- nid: 0
weight: 1
- nid: 1
weight: 1
access_pattern:
sz_bytes:
min: 0 B
max: max
nr_accesses:
min: 0 %
max: 100 %
age:
min: 0 ns
max: max
$ sudo ./damo/damo interleave_vaddr.yaml
$ # Verify that DAMON has migrated data to match the 1:1 ratio
$ numastat -c -p alloc_data
Per-node process memory usage (in MBs) for PID 6587 (alloc_data)
Node 0 Node 1 Total
------ ------ -----
Huge 0 0 0
Heap 0 0 0
Stack 0 0 0
Private 514 514 1027
------- ------ ------ -----
Total 514 514 1027
Performance Test
================
Below is a simple example showing that interleaving application data using
these patches can improve application performance. To do this, we run a
bandwidth intensive embedding reduction application [7]. This workload is
useful for this test because it reports the time it takes each iteration
to run and each iteration reuses the same allocation, allowing us to see
the benefits of the migration.
We evaluate this on a 128 core/256 thread AMD CPU with 72GB/s of local DDR
bandwidth and 26 GB/s of CXL bandwidth.
Before we start the workload, the system bandwidth utilization is low, so
we start with the interleave weights of 1:0, i.e. allocating all data to
local memory. When the workload beings, it saturates the local bandwidth,
making the page placement suboptimal. To alleviate this, we modify the
interleave weights, triggering DAMON to migrate the workload's data.
We use the same interleave_vaddr.yaml file to setup DAMON, except we
configure it to begin with a 1:0 interleave ratio, and attach it to the
shell and its children processes.
REPEAT # 0 Baseline Total time : 7323.54 ms
REPEAT # 1 Baseline Total time : 7624.56 ms
REPEAT # 2 Baseline Total time : 7619.61 ms
REPEAT # 3 Baseline Total time : 7617.12 ms
REPEAT # 4 Baseline Total time : 7638.64 ms
REPEAT # 5 Baseline Total time : 7611.27 ms
REPEAT # 6 Baseline Total time : 7629.32 ms
REPEAT # 7 Baseline Total time : 7695.63 ms
# Interleave weights set to 3:1
REPEAT # 8 Baseline Total time : 7077.5 ms
REPEAT # 9 Baseline Total time : 5633.23 ms
REPEAT # 10 Baseline Total time : 5644.6 ms
REPEAT # 11 Baseline Total time : 5627.66 ms
REPEAT # 12 Baseline Total time : 5629.76 ms
REPEAT # 13 Baseline Total time : 5633.05 ms
REPEAT # 14 Baseline Total time : 5641.24 ms
REPEAT # 15 Baseline Total time : 5631.18 ms
REPEAT # 16 Baseline Total time : 5631.33 ms
Updating the interleave weights and having DAMON migrate the workload data
according to the weights resulted in an approximarely 25% speedup.
Patches Sequence
================
Patches 1-7 extend the DAMON API to specify multiple destination nodes and
weights for the migrate_{hot,cold} actions. These patches are from SJ'S
RFC [8].
Patches 8-10 add a vaddr implementation of the migrate_{hot,cold} schemes.
Patch 11 modifies the vaddr migrate_{hot,cold} schemes to interleave data
according to the weights provided by damos->migrate_dest.
Patches 12-13 allow the vaddr migrate_{hot,cold} implementation to filter
out folios like the paddr version.
This patch (of 13):
Introduce a new struct, namely damos_migrate_dests, for specifying
multiple DAMOS' migration destination nodes and their weights.
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()") Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yunjeong Mun [Mon, 7 Jul 2025 23:59:18 +0000 (08:59 +0900)]
samples/damon: support automatic node address detection
This patch adds a new knob `detect_node_addresses`, which determines
whether the physical address range is set manually using the existing
knobs or automatically by the mtier module. When `detect_node_addresses`
set to 'Y', mtier automatically converts node0 and node1 to their physical
addresses. If set to 'N', it uses the existing 'node#_start_addr' and
'node#_end_addr' to define regions as before.
Link: https://lkml.kernel.org/r/20250707235919.513-1-yunjeong.mun@sk.com Signed-off-by: Yunjeong Mun <yunjeong.mun@sk.com> Suggested-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
However, other sample modules of damon use "enable" parameter knobs so
it'd be better to rename them from "enable" to "enabled" to keep the
consistency with other damon modules.
Vlastimil Babka [Wed, 25 Jun 2025 15:51:52 +0000 (17:51 +0200)]
mm, vmstat: remove the NR_WRITEBACK_TEMP node_stat_item counter
The only user of the counter (FUSE) was removed in commit 0c58a97f919c
("fuse: remove tmp folio for writebacks and internal rb tree") so follow
the established pattern of removing the counter and hardcoding 0 in
meminfo output, as done recently with NR_BOUNCE. Update documentation for
procfs, including for the value for Bounce that was missed when removing
its counter.
Also remove the mention of NR_WRITEBACK_TEMP implications from a comment
in wb_position_ratio(). The rest of the comment there about fuse setting
bdi->max_ratio to 1% is still correct.
[vbabka@suse.cz: v2] Link: https://lkml.kernel.org/r/5a848e15-6a57-4ecb-a015-d4f358b8a5d3@suse.cz Link: https://lkml.kernel.org/r/20250625-nr_writeback_removal-v1-1-7f2a0df70faa@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Brendan Jackman <jackmanb@google.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joanne Koong <joannelkoong@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zach O'Keefe <zokeefe@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/vmstat: utilize designated initializers for the vmstat_text array
The vmstat_text array defines labels for counters displayed in
/proc/vmstat. The current definition of the array implies a specific
order of the counters in their enums, making it fragile.
To make it clear which counter the label is for, use designated
initializers.
Link: https://lkml.kernel.org/r/20250603084556.113975-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vmstat_text array contains labels for counters displayed in
/proc/vmstat. It is important to keep the labels in sync with the
counters.
There is a BUILD_BUG_ON() check in vmstat_start() that ensures the size of
the vmstat_text is not smaller than VM_EVENT_COUNTERS. This helps to
catch cases where a new counter is added but the label is not. However,
it does not help if a counter is removed but the label remains.
It would be nice to make the BUILD_BUG_ON() check more strict to catch
such cases. However, when compiling with MEMCG enabled but
VM_EVENT_COUNTERS disabled, the vmstat_text array is larger than
NR_VMSTAT_ITEMS.
This issue arises because some elements of the vmstat_text array are
present when either MEMCG or VM_EVENT_COUNTERS is enabled, but
NR_VMSTAT_ITEMS only accounts for these elements if VM_EVENT_COUNTERS is
enabled.
Instead of adjusting the NR_VMSTAT_ITEMS definition to account for MEMCG,
make MEMCG select VM_EVENT_COUNTERS. VM_EVENT_COUNTERS is enabled in most
configurations anyway.
Link: https://lkml.kernel.org/r/20250604095111.533783-1-kirill.shutemov@linux.intel.com Fixes: ebc5d83d0443 ("mm/memcontrol: use vmstat names for printing statistics") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: remove boolean output parameters from folio_pte_batch_ext()
Instead, let's just allow for specifying through flags whether we want to
have bits merged into the original PTE.
For the madvise() case, simplify by having only a single parameter for
merging young+dirty. For madvise_cold_or_pageout_pte_range() merging the
dirty bit is not required, but also not harmful. This code is not that
performance critical after all to really force all micro-optimizations.
As we now have two pte_t * parameters, use PageTable() to make sure we are
actually given a pointer at a copy of the PTE, not a pointer into an
actual page table.
Link: https://lkml.kernel.org/r/20250702104926.212243-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jann Horn <jannh@google.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: split folio_pte_batch() into folio_pte_batch() and folio_pte_batch_flags()
Many users (including upcoming ones) don't really need the flags etc, and
can live with the possible overhead of a function call.
So let's provide a basic, non-inlined folio_pte_batch(), to avoid code
bloat while still providing a variant that optimizes out all flag checks
at runtime. folio_pte_batch_flags() will get inlined into
folio_pte_batch(), optimizing out any conditionals that depend on input
flags.
folio_pte_batch() will behave like folio_pte_batch_flags() when no flags
are specified. It's okay to add new users of folio_pte_batch_flags(), but
using folio_pte_batch() if applicable is preferred.
So, before this change, folio_pte_batch() was inlined into the C file
optimized by propagating constants within the resulting object file.
With this change, we now also have a folio_pte_batch() that is optimized
by propagating all constants. But instead of having one instance per
object file, we have a single shared one.
In zap_present_ptes(), where we care about performance, the compiler
already seem to generate a call to a common inlined folio_pte_batch()
variant, shared with fork() code. So calling the new non-inlined variant
should not make a difference.
While at it, drop the "addr" parameter that is unused.
Link: https://lkml.kernel.org/r/20250702104926.212243-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/linux-mm/20250503182858.5a02729fcffd6d4723afcfc2@linux-foundation.org/ Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jann Horn <jannh@google.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: folio_pte_batch() improvements", v2.
Ever since we added folio_pte_batch() for fork() + munmap() purposes, a
lot more users appeared (and more are being proposed), and more
functionality was added.
Most of the users only need basic functionality, and could benefit from a
non-inlined version.
So let's clean up folio_pte_batch() and split it into a basic
folio_pte_batch() (no flags) and a more advanced folio_pte_batch_ext().
Using either variant will now look much cleaner.
This series will likely conflict with some changes in some (old+new)
folio_pte_batch() users, but conflicts should be trivial to resolve.
This patch (of 4):
Respecting these PTE bits is the exception, so let's invert the meaning.
With this change, most callers don't have to pass any flags. This is a
preparation for splitting folio_pte_batch() into a non-inlined variant
that doesn't consume any flags.
Long-term, we want folio_pte_batch() to probably ignore most common PTE
bits (e.g., write/dirty/young/soft-dirty) that are not relevant for most
page table walkers: uffd-wp and protnone might be bits to consider in the
future. Only walkers that care about them can opt-in to respect them.
No functional change intended.
Link: https://lkml.kernel.org/r/20250702104926.212243-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Dev Jain <dev.jain@arm.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jann Horn <jannh@google.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Mon, 7 Jul 2025 06:57:11 +0000 (06:57 +0000)]
mm/migrate: remove the -EEXIST conversion for move_pages()
The -EEXIST conversion is introduced in commit 65462462ffb2 ("mm/gup:
follow_pfn_pte(): -EEXIST cleanup"), since follow_page() may call
follow_pfn_pte() which may return -EEXIST.
But after commit 7dff875c9436 ("mm/migrate: convert
add_page_for_migration() from follow_page() to folio_walk"), it use
folio_walk instead. This limit the error code and won't return -EEXIST.
Remove the error code conversion here.
Link: https://lkml.kernel.org/r/20250707065711.18056-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: Ying Huang <ying.huang@linux.alibaba.com> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sat, 5 Jul 2025 17:50:00 +0000 (10:50 -0700)]
Docs/mm/damon/maintainer-profile: update for mm-new tree
Recently a new mm tree for new patches, namely mm-new, has been added.
Update DAMON maintainer's profile doc for DAMON patches life cycle, which
depend on those of mm trees.
SeongJae Park [Sat, 5 Jul 2025 17:49:59 +0000 (10:49 -0700)]
mm/damon/sysfs: don't hold kdamond_lock in before_terminate()
damon_sysfs_before_terminate() is a DAMON callback that is executed from
the kdamond's context. Hence it is safe to access DAMON context internal
data. But the function is unnecessarily holding kdamond_lock of the
context. It is just unnecessary. Remove the locking code.
SeongJae Park [Sat, 5 Jul 2025 17:49:58 +0000 (10:49 -0700)]
mm/damon/sysfs: use DAMON core API damon_is_running()
DAMON core implements a static function to see if a given DAMON context is
running. DAMON sysfs interface is implementing the same one on its own.
Make the core function non-static and reuse it from the DAMON sysfs
interface.
SeongJae Park [Sat, 5 Jul 2025 17:49:57 +0000 (10:49 -0700)]
samples/damon/mtier: rename to have damon_sample_ prefix
DAMON sample module, mtier has its name 'mtier'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
SeongJae Park [Sat, 5 Jul 2025 17:49:56 +0000 (10:49 -0700)]
samples/damon/prcl: rename to have damon_sample_ prefix
DAMON sample module, prcl has its name 'prcl'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
SeongJae Park [Sat, 5 Jul 2025 17:49:55 +0000 (10:49 -0700)]
samples/damon/wsse: rename to have damon_sample_ prefix
Patch series "mm/damon: misc cleanups".
Yet another round of miscellaneous DAMON cleanups.
This patch (of 6):
DAMON sample module, wsse has its name 'wsse'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
Baolin Wang [Fri, 4 Jul 2025 03:19:26 +0000 (11:19 +0800)]
mm: fault in complete folios instead of individual pages for tmpfs
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), tmpfs can also support large folio allocation (not just PMD-sized
large folios).
However, when accessing tmpfs via mmap(), although tmpfs supports large
folios, we still establish mappings at the base page granularity, which is
unreasonable.
We can map multiple consecutive pages of tmpfs folios at once according to
the size of the large folio. On one hand, this can reduce the overhead of
page faults; on the other hand, it can leverage hardware architecture
optimizations to reduce TLB misses, such as contiguous PTEs on the ARM
architecture.
Moreover, tmpfs mount will use the 'huge=' option to control large folio
allocation explicitly. So it can be understood that the process's RSS
statistics might increase, and I think this will not cause any obvious
effects for users.
Performance test:
I created a 1G tmpfs file, populated with 64K large folios, and write-accessed it
sequentially via mmap(). I observed a significant performance improvement:
Before the patch:
real 0m0.158s
user 0m0.008s
sys 0m0.150s
After the patch:
real 0m0.021s
user 0m0.004s
sys 0m0.017s
Link: https://lkml.kernel.org/r/440940e78aeb7430c5cc8b6d2088ae98265b9809.1751599072.git.baolin.wang@linux.alibaba.com Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Dev Jain <dev.jain@arm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 6 Jul 2025 19:32:07 +0000 (12:32 -0700)]
mm/damon/reclaim: use parameter context correctly
damon_reclaim_apply_parameters() allocates a new DAMON context, stages
user-specified DAMON parameters on it, and commits to running DAMON
context at once, using damon_commit_ctx(). The code is mistakenly
over-writing the monitoring attributes and the reclaim scheme on the
running context. It is not causing a real problem for monitoring
attributes, but the scheme overwriting can remove scheme's internal status
such as charged quota. Fix the wrong use of the parameter context.
SeongJae Park [Sun, 6 Jul 2025 19:32:06 +0000 (12:32 -0700)]
mm/damon/lru_sort: reset enabled when DAMON start failed
When the startup fails, 'enabled' parameter is not reset. As a result,
users show the parameter 'Y' while it is not really working. Fix it by
resetting 'enabled' to 'false' when the work is failed.
SeongJae Park [Sun, 6 Jul 2025 19:32:05 +0000 (12:32 -0700)]
mm/damon/reclaim: reset enabled when DAMON start failed
When the startup fails, 'enabled' parameter is not reset. As a result,
users show the parameter 'Y' while it is not really working. Fix it by
resetting 'enabled' to 'false' when the work is failed.
SeongJae Park [Sun, 6 Jul 2025 19:32:04 +0000 (12:32 -0700)]
samples/damon/mtier: support boot time enable setup
If 'enable' parameter of the 'mtier' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-4-sj@kernel.org Fixes: 82a08bde3cf7 ("samples/damon: implement a DAMON module for memory tiering") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 6 Jul 2025 19:32:03 +0000 (12:32 -0700)]
samples/damon/prcl: fix boot time enable crash
If 'enable' parameter of the 'prcl' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-3-sj@kernel.org Fixes: 2aca254620a8 ("samples/damon: introduce a skeleton of a smaple DAMON module for proactive reclamation") Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 6 Jul 2025 19:32:02 +0000 (12:32 -0700)]
samples/damon/wsse: fix boot time enable handling
Patch series "mm/damon: fix misc bugs in DAMON modules".
From manual code review, I found below bugs in DAMON modules.
DAMON sample modules crash if those are enabled at boot time, via kernel
command line. A similar issue was found and fixed on DAMON non-sample
modules in the past, but we didn't check that for sample modules.
DAMON non-sample modules are not setting 'enabled' parameters accordingly
when real enabling is failed. Honggyu found and fixed[1] this type of
bugs in DAMON sample modules, and my inspection was motivated by the great
work. Kudos to Honggyu.
Finally, DAMON_RECLIAM is mistakenly losing scheme internal status due to
misuse of damon_commit_ctx(). DAMON_LRU_SORT has a similar misuse, but
fortunately it is not causing real status loss.
Fix the bugs. Since these are similar patterns of bugs that were found in
the past, it would be better to add tests or refactor the code, in future.
This patch (of 6):
If 'enable' parameter of the 'wsse' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
SeongJae Park [Fri, 4 Jul 2025 22:14:08 +0000 (15:14 -0700)]
mm/damon: add trace event for effective size quota
Aim-oriented DAMOS quota auto-tuning is an important and recommended
feature for DAMOS users. Add a trace event for the observability of the
tuned quota and tuning itself.
SeongJae Park [Fri, 4 Jul 2025 22:14:07 +0000 (15:14 -0700)]
mm/damon: add trace event for auto-tuned monitoring intervals
Patch series "mm/damon: add trace events for auto-tuned monitoring
intervals and DAMOS quota".
The aim-oriented auto-tuning features for monitoring intervals and DAMOS
quota are important and recommended. Add tracepoints for observabilities
of those tuned values and the tuning itself.
This patch (of 2):
Aim-oriented monitoring intervals auto-tuning is an important and
recommended feature for DAMON users. Add a trace event for the
observability of the tuned intervals and tuning itself.
Dev Jain [Fri, 4 Jul 2025 04:04:17 +0000 (09:34 +0530)]
khugepaged: reduce race probability between migration and khugepaged
Suppose a folio is under migration, and khugepaged is also trying to
collapse it. collapse_pte_mapped_thp() will retrieve the folio from the
page cache via filemap_lock_folio(), thus taking a reference on the folio
and sleeping on the folio lock, since the lock is held by the migration
path. Migration will then fail in __folio_migrate_mapping ->
folio_ref_freeze. Reduce the probability of such a race happening
(leading to migration failure) by bailing out if we detect a PMD is marked
with a migration entry.
This fixes the migration-shared-anon-thp testcase failure on Apple M3.
Note that, this is not a "fix" since it only reduces the chance of
interference of khugepaged with migration, wherein both the kernel
functionalities are deemed "best-effort".
Link: https://lkml.kernel.org/r/20250704040417.63826-1-dev.jain@arm.com Signed-off-by: Dev Jain <dev.jain@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Raghavendra K T [Wed, 2 Jul 2025 06:43:19 +0000 (06:43 +0000)]
lib/test_vmalloc.c: introduce xfail for failing tests
The test align_shift_alloc_test is expected to fail. Reporting the test
as fail confuses to be a genuine failure. Introduce widely used xfail
sematics to address the issue.
Note: a warn_alloc dump similar to below is still expected:
Link: https://lkml.kernel.org/r/20250702064319.885-1-raghavendra.kt@amd.com Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com> Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Dev Jain <dev.jain@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's bring the docs up-to-date. Setting PG_movable_ops + page->private
very likely still requires to be performed under documented locks: it's
complicated.
We will rework this in the future, as we will try avoiding using the page
lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-29-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that PAGE_MAPPING_MOVABLE is gone, we can simplify and rely on the
folio_test_anon() test only.
... but staring at the users, this function should never even have been
called on movable_ops pages. E.g.,
* __buffer_migrate_folio() does not make sense for them
* folio_migrate_mapping() does not make sense for them
* migrate_huge_page_move_mapping() does not make sense for them
* __migrate_folio() does not make sense for them
* ... and khugepaged should never stumble over them
Let's simply refuse typed pages (which includes slab) except hugetlb, and
WARN.
Link: https://lkml.kernel.org/r/20250704102524.326966-26-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: convert "movable" flag in page->mapping to a page flag
Instead, let's use a page flag. As the page flag can result in
false-positives, glue it to the page types for which we support/implement
movable_ops page migration.
We are reusing PG_uptodate, that is for example used to track file system
state and does not apply to movable_ops pages. So warning in case it is
set in page_has_movable_ops() on other page types could result in
false-positive warnings.
Likely we could set the bit using a non-atomic update: in contrast to
page->mapping, we could have others trying to update the flags
concurrently when trying to lock the folio. In
isolate_movable_ops_page(), we already take care of that by checking if
the page has movable_ops before locking it. Let's start with the atomic
variant, we could later switch to the non-atomic variant once we are sure
other cases are similarly fine. Once we perform the switch, we'll have to
introduce __SETPAGEFLAG_NOOP().
[david@redhat.com: add missing `:' in kerneldoc] Link: https://lkml.kernel.org/r/d96e2916-2c43-462c-b6a1-2375ef397d8b@redhat.com Link: https://lkml.kernel.org/r/20250704102524.326966-21-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
... instead, look them up statically based on the page type. Maybe in
the future we want a registration interface? At least for now, it can be
easily handled using the two page types that actually support page
migration.
The remaining usage of page->mapping is to flag such pages as actually
being movable (having movable_ops), which we will change next.
Link: https://lkml.kernel.org/r/20250704102524.326966-20-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to page_has_movable_ops(). While at it, cleanup relevant code a
bit.
The data_race() in migrate_folio_unmap() is questionable: we already hold
a page reference, and concurrent modifications can no longer happen (iow:
__ClearPageMovable() no longer exists). Drop it for now, we'll rework
page_has_movable_ops() soon either way to no longer rely on page->mapping.
Wherever we cast from folio to page now is a clear sign that this code has
to be decoupled.
Link: https://lkml.kernel.org/r/20250704102524.326966-19-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, if __ClearPageMovable() were invoked on a page, this would
cause __PageMovable() to return false, but due to the continued existence
of page movable ops, PageMovable() would have returned true.
With __ClearPageMovable() gone, the two are exactly equivalent.
So we can replace PageMovable() checks by __PageMovable(). In fact,
__PageMovable() cannot change until a page is freed, so we can turn some
PageMovable() into sanity checks for __PageMovable().
Link: https://lkml.kernel.org/r/20250704102524.326966-16-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The Chinese docs in Documentation/translations/zh_CN/mm/page_migration.rst
still mention it, but that whole docs is destined to get outdated and
updated by somebody that actually speaks that language.
Link: https://lkml.kernel.org/r/20250704102524.326966-15-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/balloon_compaction: stop using __ClearPageMovable()
We can just look at the balloon device (stored in page->private), to see
if the page is still part of the balloon.
As isolated balloon pages cannot get released (they are taken off the
balloon list while isolated), we don't have to worry about this case in
the putback and migration callback. Add a WARN_ON_ONCE for now.
Link: https://lkml.kernel.org/r/20250704102524.326966-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Eugenio Pé rez <eperezma@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gregory Price <gourry@gourry.net> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / thirdparty / kernel / linux.git / log
