Linus Torvalds [Thu, 18 Dec 2025 20:28:02 +0000 (08:28 +1200)]
Merge tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
Linus Torvalds [Thu, 18 Dec 2025 20:23:23 +0000 (08:23 +1200)]
Merge tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
Linus Torvalds [Thu, 18 Dec 2025 20:11:53 +0000 (08:11 +1200)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
Linus Torvalds [Thu, 18 Dec 2025 19:50:20 +0000 (07:50 +1200)]
Merge tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- important fix for reconnect problem
- minor cleanup
* tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb: move some SMB1 definitions into common/smb1pdu.h
smb: align durable reconnect v2 context to 8 byte boundary
Linus Torvalds [Thu, 18 Dec 2025 19:41:17 +0000 (07:41 +1200)]
Merge tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Two fsnotify fixes.
The fix from Ahelenia makes sure we generate event when modifying
inode flags, the fix from Amir disables sending of events from device
inodes to their parent directory as it could concievably create a
usable side channel attack in case of some devices and so far we
aren't aware of anybody depending on the functionality"
* tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: send fsnotify_xattr()/IN_ATTRIB from vfs_fileattr_set()/chattr(1)
fsnotify: do not generate ACCESS/MODIFY events on child for special files
Paolo Abeni [Thu, 18 Dec 2025 16:23:07 +0000 (17:23 +0100)]
Merge tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-12-18
this is a pull request of 3 patches for net/main.
Tetsuo Handa contributes 2 patches to fix race windows in the j1939
protocol to properly handle disappearing network devices.
The last patch is by me, it fixes a build dependency with the CAN
drivers, that got introduced while fixing a dependency between the CAN
protocol and CAN device code.
* tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: fix build dependency
can: j1939: make j1939_sk_bind() fail if device is no longer registered
can: j1939: make j1939_session_activate() fail if device is no longer registered
====================
Jian Shen [Thu, 11 Dec 2025 02:37:37 +0000 (10:37 +0800)]
net: hns3: add VLAN id validation before using
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jian Shen [Thu, 11 Dec 2025 02:37:36 +0000 (10:37 +0800)]
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps
equals rss_size. However, if the tc_num is greater than 1, then rss_size
will be less than num_tqps, causing the tqp_index check for subsequent TCs
using rss_size to always fail.
This patch uses the num_tqps to check whether tqp_index is out of range,
instead of rss_size.
Fixes: 326334aad024 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jian Shen [Thu, 11 Dec 2025 02:37:35 +0000 (10:37 +0800)]
net: hns3: using the num_tqps in the vf driver to apply for resources
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Wei Fang [Thu, 11 Dec 2025 02:09:19 +0000 (10:09 +0800)]
net: enetc: do not transmit redirected XDP frames when the link is down
In the current implementation, the enetc_xdp_xmit() always transmits
redirected XDP frames even if the link is down, but the frames cannot
be transmitted from TX BD rings when the link is down, so the frames
are still kept in the TX BD rings. If the XDP program is uninstalled,
users will see the following warning logs.
fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear
More worse, the TX BD ring cannot work properly anymore, because the
HW PIR and CIR are not equal after the re-initialization of the TX
BD ring. At this point, the BDs between CIR and PIR are invalid,
which will cause a hardware malfunction.
Another reason is that there is internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when we re-initialize
the ring. The internal context is only reset by an FLR. That is to say,
for LS1028A ENETC, software cannot set the HW CIR and PIR when
initializing the TX BD ring.
It does not make sense to transmit redirected XDP frames when the link is
down. Add a link status check to prevent transmission in this condition.
This fixes part of the issue, but more complex cases remain. For example,
the TX BD ring may still contain unsent frames when the link goes down.
Those situations require additional patches, which will build on this
one.
Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20251211020919.121113-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Victor Nogueira [Wed, 10 Dec 2025 16:22:55 +0000 (11:22 -0500)]
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
Add a test case that reproduces deadlock scenario where the user has
a drr qdisc attached to root and has a mirred action that redirects to
self on egress
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
syzbot reported the lockdep splat below. [0]
sctp_clone_sock() sets the child socket's ipv6_mc_list to NULL,
but somehow sock_release() in an error path finally acquires
lock_sock() in ipv6_sock_mc_close().
The root cause is that sctp_clone_sock() fetches inet6_sk(newsk)
before setting newinet->pinet6, meaning that the parent's
ipv6_mc_list was actually cleared.
Also, sctp_v6_copy_ip_options() uses inet6_sk() but is called
before newinet->pinet6 is set.
Let's use inet6_sk() only after setting newinet->pinet6.
[0]:
WARNING: possible recursive locking detected
syzkaller #0 Not tainted
syz.0.17/5996 is trying to acquire lock: ffff888031af4c60 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1700 [inline] ffff888031af4c60 (sk_lock-AF_INET6){+.+.}-{0:0}, at: ipv6_sock_mc_close+0xd3/0x140 net/ipv6/mcast.c:348
but task is already holding lock: ffff888031af4320 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1700 [inline] ffff888031af4320 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_getsockopt+0x135/0xb60 net/sctp/socket.c:8131
other info that might help us debug this:
Possible unsafe locking scenario:
When a handshake request is cancelled it is removed from the
handshake_net->hn_requests list, but it is still present in the
handshake_rhashtbl until it is destroyed.
If a second cancellation request arrives for the same handshake request,
then remove_pending() will return false... and assuming
HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue
processing through the out_true label, where we put another reference on
the sock and a refcount underflow occurs.
This can happen for example if a handshake times out - particularly if
the SUNRPC client sends the AUTH_TLS probe to the server but doesn't
follow it up with the ClientHello due to a problem with tlshd. When the
timeout is hit on the server, the server will send a FIN, which triggers
a cancellation request via xs_reset_transport(). When the timeout is
hit on the client, another cancellation request happens via
xs_tls_handshake_sync().
Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel
path so duplicate cancels can be detected.
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Suggested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20251209193015.3032058-1-smayhew@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 18 Dec 2025 12:55:01 +0000 (13:55 +0100)]
Merge tag 'nf-25-12-16' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Jozsef Kadlecsik is retiring. Fortunately Jozsef will still keep an
eye on ipset patches.
2) remove a bogus direction check from nat core, this caused spurious
flakes in the 'reverse clash' selftest, from myself.
3) nf_tables doesn't need to do chain validation on register store,
from Pablo Neira Ayuso.
4) nf_tables shouldn't revisit chains during ruleset (graph) validation
if possible. Both 3 and 4 were slated for -next initially but there
are now two independent reports of people hitting soft lockup errors
during ruleset validation, so it makes no sense anymore to route
this via -next given this is -stable material. From myself.
5) call cond_resched() in a more frequently visited place during nf_tables
chain validation, this wasn't possible earlier due to rcu read lock,
but nowadays its not held anymore during set walks.
6) Don't fail conntrack packetdrill test with HZ=100 kernels.
netfilter pull request nf-25-12-16
* tag 'nf-25-12-16' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: packetdrill: avoid failure on HZ=100 kernel
netfilter: nf_tables: avoid softlockup warnings in nft_chain_validate
netfilter: nf_tables: avoid chain re-validation if possible
netfilter: nf_tables: remove redundant chain validation on register store
netfilter: nf_nat: remove bogus direction check
MAINTAINERS: Remove Jozsef Kadlecsik from MAINTAINERS file
====================
Cosmin Ratiu [Tue, 9 Dec 2025 12:56:17 +0000 (14:56 +0200)]
net/mlx5e: Don't include PSP in the hard MTU calculations
Commit [1] added the 40 bytes required by the PSP header+trailer and the
UDP header to MLX5E_ETH_HARD_MTU, which limits the device-wide max
software MTU that could be set. This is not okay, because most packets
are not PSP packets and it doesn't make sense to always reserve space
for headers which won't get added in most cases.
As it turns out, for TCP connections, PSP overhead is already taken into
account in the TCP MSS calculations via inet_csk(sk)->icsk_ext_hdr_len.
This was added in commit [2]. This means that the extra space reserved
in the hard MTU for mlx5 ends up unused and wasted.
Remove the unnecessary 40 byte reservation from hard MTU.
[1] commit e5a1861a298e ("net/mlx5e: Implement PSP Tx data path")
[2] commit e97269257fe4 ("net: psp: update the TCP MSS to reflect PSP
packet overhead")
Fixes: e5a1861a298e ("net/mlx5e: Implement PSP Tx data path") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1765284977-1363052-10-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan [Tue, 9 Dec 2025 12:56:16 +0000 (14:56 +0200)]
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
During channel reconfiguration (e.g., ethtool private flags changes),
the driver can trigger a kernel BUG_ON in dql_completed() with the error
"kernel BUG at lib/dynamic_queue_limits.c:99".
The issue occurs in the following sequence:
During mlx5e_safe_switch_params(), old channels are deactivated via
mlx5e_deactivate_txqsq(). New channels are created and activated, taking
ownership of the netdev_queues and their BQL state.
When old channels are closed via mlx5e_close_txqsq(), there may be
pending TX descriptors (sq->cc != sq->pc) that were in-flight during the
deactivation.
mlx5e_free_txqsq_descs() frees these pending descriptors and attempts to
complete them via netdev_tx_completed_queue().
However, the BQL state (dql->num_queued and dql->num_completed) have
been reset in mlx5e_activate_txqsq and belong to the new queue owner,
leading to dql->num_queued - dql->num_completed < nbytes.
This triggers BUG_ON(count > num_queued - num_completed) in
dql_completed().
Fixes: 3b88a535a8e1 ("net/mlx5e: Defer channels closure to reduce interface down time") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Link: https://patch.msgid.link/1765284977-1363052-9-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jianbo Liu [Tue, 9 Dec 2025 12:56:15 +0000 (14:56 +0200)]
net/mlx5e: Trigger neighbor resolution for unresolved destinations
When initializing the MAC addresses for an outbound IPsec packet offload
rule in mlx5e_ipsec_init_macs, the call to dst_neigh_lookup is used to
find the next-hop neighbor (typically the gateway in tunnel mode).
This call might create a new neighbor entry if one doesn't already
exist. This newly created entry starts in the INCOMPLETE state, as the
kernel hasn't yet sent an ARP or NDISC probe to resolve the MAC
address. In this case, neigh_ha_snapshot will correctly return an
all-zero MAC address.
IPsec packet offload requires the actual next-hop MAC address to
program the rule correctly. If the neighbor state is INCOMPLETE when
the rule is created, the hardware rule is programmed with an all-zero
destination MAC address. Packets sent using this rule will be
subsequently dropped by the receiving network infrastructure or host.
This patch adds a check specifically for the outbound offload path. If
neigh_ha_snapshot returns an all-zero MAC address, it proactively
calls neigh_event_send(n, NULL). This ensures the kernel immediately
sends the initial ARP or NDISC probe if one isn't already pending,
accelerating the resolution process. This helps prevent the hardware
rule from being programmed with an invalid MAC address and avoids
packet drops due to unresolved neighbors.
Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1765284977-1363052-8-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jianbo Liu [Tue, 9 Dec 2025 12:56:14 +0000 (14:56 +0200)]
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
Replace ipv6_stub->ipv6_dst_lookup_flow() with ip6_dst_lookup() in
mlx5e_ipsec_init_macs() since IPsec transformations are not needed
during Security Association setup - only basic routing information is
required for nexthop MAC address resolution.
This resolves an issue where XfrmOutNoStates error counter would be
incremented when xfrm policy is configured before xfrm state, as the
IPsec-aware routing function would attempt policy checks during SA
initialization.
Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1765284977-1363052-7-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shay Drory [Tue, 9 Dec 2025 12:56:13 +0000 (14:56 +0200)]
net/mlx5: Serialize firmware reset with devlink
The firmware reset mechanism can be triggered by asynchronous events,
which may race with other devlink operations like devlink reload or
devlink dev eswitch set, potentially leading to inconsistent states.
This patch addresses the race by using the devl_lock to serialize the
firmware reset against other devlink operations. When a reset is
requested, the driver attempts to acquire the lock. If successful, it
sets a flag to block devlink reload or eswitch changes, ACKs the reset
to firmware and then releases the lock. If the lock is already held by
another operation, the driver NACKs the firmware reset request,
indicating that the reset cannot proceed.
Firmware reset does not keep the devl_lock and instead uses an internal
firmware reset bit. This is because firmware resets can be triggered by
asynchronous events, and processed in different threads. It is illegal
and unsafe to acquire a lock in one thread and attempt to release it in
another, as lock ownership is intrinsically thread-specific.
This change ensures that firmware resets and other devlink operations
are mutually exclusive during the critical reset request phase,
preventing race conditions.
The firmware tracer's format string validation and parameter counting
did not properly handle escaped percent signs (%%). This caused
fw_tracer to count more parameters when trace format strings contained
literal percent characters.
To fix it, allow %% to pass string validation and skip %% sequences when
counting parameters since they represent literal percent signs rather
than format specifiers.
Shay Drory [Tue, 9 Dec 2025 12:56:11 +0000 (14:56 +0200)]
net/mlx5: fw_tracer, Validate format string parameters
Add validation for format string parameters in the firmware tracer to
prevent potential security vulnerabilities and crashes from malformed
format strings received from firmware.
The firmware tracer receives format strings from the device firmware and
uses them to format trace messages. Without proper validation, bad
firmware could provide format strings with invalid format specifiers
(e.g., %s, %p, %n) that could lead to crashes, or other undefined
behavior.
Add mlx5_tracer_validate_params() to validate that all format specifiers
in trace strings are limited to safe integer/hex formats (%x, %d, %i,
%u, %llx, %lx, etc.). Reject strings containing other format types that
could be used to access arbitrary memory or cause crashes.
Invalid format strings are added to the trace output for visibility with
"BAD_FORMAT: " prefix.
Moshe Shemesh [Tue, 9 Dec 2025 12:56:09 +0000 (14:56 +0200)]
net/mlx5: fw reset, clear reset requested on drain_fw_reset
drain_fw_reset() waits for ongoing firmware reset events and blocks new
event handling, but does not clear the reset requested flag, and may
keep sync reset polling.
To fix it, call mlx5_sync_reset_clear_reset_requested() to clear the
flag, stop sync reset polling, and resume health polling, ensuring
health issues are still detected after the firmware reset drain.
Paolo Abeni [Thu, 18 Dec 2025 11:53:23 +0000 (12:53 +0100)]
Merge branch 'net-dsa-lantiq-a-bunch-of-fixes'
Daniel Golle says:
====================
net: dsa: lantiq: a bunch of fixes
This series is the continuation and result of comments received for a fix
for the SGMII restart-an bit not actually being self-clearing, which was
reported by by Rasmus Villemoes.
A closer investigation and testing the .remove and the .shutdown paths
of the mxl-gsw1xx.c and lantiq_gswip.c drivers has revealed a couple of
existing problems, which are also addressed in this series.
====================
Daniel Golle [Tue, 9 Dec 2025 01:29:34 +0000 (01:29 +0000)]
net: dsa: mxl-gsw1xx: manually clear RANEG bit
Despite being documented as self-clearing, the RANEG bit sometimes
remains set, preventing auto-negotiation from happening.
Manually clear the RANEG bit after 10ms as advised by MaxLinear.
In order to not hold RTNL during the 10ms of waiting schedule
delayed work to take care of clearing the bit asynchronously, which
is similar to the self-clearing behavior.
The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Daniel Golle [Tue, 9 Dec 2025 01:28:49 +0000 (01:28 +0000)]
net: dsa: mxl-gsw1xx: fix order in .remove operation
The driver's .remove operation was calling gswip_disable_switch() which
clears the GSWIP_MDIO_GLOB_ENABLE bit before calling
dsa_unregister_switch() and thereby violating a Golden Rule of driver
development to always unpublish userspace interfaces before disabling
hardware, as pointed out by Russell King.
Fix this by relying in GSWIP_MDIO_GLOB_ENABLE being cleared by the
.teardown operation introduced by the previous commit
("net: dsa: lantiq_gswip: fix teardown order").
Daniel Golle [Tue, 9 Dec 2025 01:28:20 +0000 (01:28 +0000)]
net: dsa: lantiq_gswip: fix order in .remove operation
Russell King pointed out that disabling the switch by clearing
GSWIP_MDIO_GLOB_ENABLE before calling dsa_unregister_switch() is
problematic, as it violates a Golden Rule of driver development to
always first unpublish userspace interfaces and then disable the
hardware.
Fix this, and also simplify the probe() function, by introducing a
dsa_switch_ops teardown() operation which takes care of clearing the
GSWIP_MDIO_GLOB_ENABLE bit.
Gal Pressman [Mon, 8 Dec 2025 12:19:01 +0000 (14:19 +0200)]
ethtool: Avoid overflowing userspace buffer on stats query
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions.
Arnd Bergmann's patch [1] fixed the build dependency problem introduced by
bugfix commit cb2dc6d2869a ("can: Kconfig: select CAN driver infrastructure
by default"). This ended up as commit 6abd4577bccc ("can: fix build
dependency"), but I broke Arnd's fix by removing a dependency that we
thought was superfluous.
powercap: intel_rapl: Fix possible recursive lock warning
With the RAPL PMU addition, there is a recursive locking when CPU online
callback function calls rapl_package_add_pmu(). Here cpu_hotplug_lock
is already acquired by cpuhp_thread_fun() and rapl_package_add_pmu()
tries to acquire again.
<4>[ 8.197433] ============================================
<4>[ 8.197437] WARNING: possible recursive locking detected
<4>[ 8.197440] 6.19.0-rc1-lgci-xe-xe-4242-05b7c58b3367dca84+ #1 Not tainted
<4>[ 8.197444] --------------------------------------------
<4>[ 8.197447] cpuhp/0/20 is trying to acquire lock:
<4>[ 8.197450] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197463]
but task is already holding lock:
<4>[ 8.197466] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197477]
other info that might help us debug this:
<4>[ 8.197480] Possible unsafe locking scenario:
Fix this issue in the same way as rapl powercap package domain is added
from the same CPU online callback by introducing another interface which
doesn't call cpus_read_lock(). Add rapl_package_add_pmu_locked() and
rapl_package_remove_pmu_locked() which don't call cpus_read_lock().
Tetsuo Handa [Tue, 25 Nov 2025 13:43:12 +0000 (22:43 +0900)]
can: j1939: make j1939_sk_bind() fail if device is no longer registered
There is a theoretical race window in j1939_sk_netdev_event_unregister()
where two j1939_sk_bind() calls jump in between read_unlock_bh() and
lock_sock().
The assumption jsk->priv == priv can fail if the first j1939_sk_bind()
call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call
and the second j1939_sk_bind() call again made jsk->priv != NULL due to
successful j1939_local_ecu_get() call.
Since the socket lock is held by both j1939_sk_netdev_event_unregister()
and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can
reliably make the second j1939_sk_bind() call fail (and close this race
window).
Tetsuo Handa [Tue, 25 Nov 2025 13:39:59 +0000 (22:39 +0900)]
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window.
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
Linus Torvalds [Wed, 17 Dec 2025 03:48:30 +0000 (15:48 +1200)]
Merge tag 's390-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- clear 'Search boot program' flag when 'bootprog' sysfs file is
written to override a value set from Hardware Management Console
- fix cyclic dead-lock in zpci_zdev_put() and zpci_scan_devices()
functions when triggering PCI device recovery using sysfs
- annotate the expected lock context imbalance in zpci_release_device()
function to fix a sparse complaint
- fix the logic to fallback to the return address register value in the
topmost frame when stack tracing uses a back chain
* tag 's390-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/stacktrace: Do not fallback to RA register
s390/pci: Annotate lock context imbalance in zpci_release_device()
s390/pci: Fix cyclic dead-lock in zpci_zdev_put() and zpci_scan_devices()
s390/ipl: Clear SBP flag when bootprog is set
Bharath SM [Tue, 16 Dec 2025 15:56:05 +0000 (21:26 +0530)]
smb: align durable reconnect v2 context to 8 byte boundary
Add a 4-byte Pad to create_durable_handle_reconnect_v2 so the DH2C
create context is 8 byte aligned.
This avoids malformed CREATE contexts on reconnect.
Recent change removed this Padding, adding it back.
Fixes: 81a45de432c6 ("smb: move create_durable_handle_reconnect_v2 to common/smb2pdu.h") Signed-off-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Jason Gunthorpe [Tue, 16 Dec 2025 15:53:40 +0000 (11:53 -0400)]
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
syzkaller found it could overflow math in the test infrastructure and
cause a WARN_ON by corrupting the reserved interval tree. This only
effects test kernels with CONFIG_IOMMUFD_TEST.
Validate the user input length in the test ioctl.
Fixes: f4b20bb34c83 ("iommufd: Add kernel support for testing iommufd") Link: https://patch.msgid.link/r/0-v1-cd99f6049ba5+51-iommufd_syz_add_resv_jgg@nvidia.com Reviewed-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Yi Liu <yi.l.liu@intel.com> Reported-by: syzbot+57fdb0cf6a0c5d1f15a2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69368129.a70a0220.38f243.008f.GAE@google.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()") Reported-by: Ed Tsai <ed.tsai@mediatek.com> Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 6.17+ <stable@vger.kernel.org> # 6.17+ Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki
Linus Torvalds [Tue, 16 Dec 2025 07:44:36 +0000 (19:44 +1200)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
Linus Torvalds [Tue, 16 Dec 2025 07:34:09 +0000 (19:34 +1200)]
Merge tag 'v6.19-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix set xattr name validation
- Fix session refcount leak
- Minor cleanup
- smbdirect (RDMA) fixes: improve receive completion, and connect
* tag 'v6.19-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix buffer validation by including null terminator size in EA length
ksmbd: Fix refcount leak when invalid session is found on session lookup
ksmbd: remove redundant DACL check in smb_check_perm_dacl
ksmbd: convert comma to semicolon
smb: server: defer the initial recv completion logic to smb_direct_negotiate_recv_work()
smb: server: initialize recv_io->cqe.done = recv_done just once
smb: smbdirect: introduce smbdirect_socket.connect.{lock,work}
Linus Torvalds [Tue, 16 Dec 2025 07:28:20 +0000 (19:28 +1200)]
Merge tag 'for-6.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix missing btrfs_path release after printing a relocation error
message
- fix extent changeset leak on mmap write after failure to reserve
metadata
- fix fs devices list structure freeing, it could be potentially leaked
under some circumstances
- tree log fixes:
- fix incremental directory logging where inodes for new dentries
were incorrectly skipped
- don't log conflicting inode if it's a directory moved in the
current transaction
- regression fixes:
- fix incorrect btrfs_path freeing when it's auto-cleaned
- revert commit simplifying preallocation of temporary structures
in qgroup functions, some cases were not handled properly
* tag 'for-6.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix changeset leak on mmap write after failure to reserve metadata
btrfs: fix memory leak of fs_devices in degraded seed device path
btrfs: fix a potential path leak in print_data_reloc_error()
Revert "btrfs: add ASSERTs on prealloc in qgroup functions"
btrfs: do not skip logging new dentries when logging a new name
btrfs: don't log conflicting inode if it's a dir moved in the current transaction
btrfs: tests: fix double btrfs_path free in remove_extent_ref()
Linus Torvalds [Tue, 16 Dec 2025 07:24:35 +0000 (19:24 +1200)]
Merge tag 'sched_ext-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix memory leak when destroying helper kthread workers during
scheduler disable
- Fix bypass depth accounting on scx_enable() failure which could leave
the system permanently in bypass mode
- Fix missing preemption handling when moving tasks to local DSQs via
scx_bpf_dsq_move()
- Misc fixes including NULL check for put_prev_task(), flushing stdout
in selftests, and removing unused code
* tag 'sched_ext-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unused code in the do_pick_task_scx()
selftests/sched_ext: flush stdout before test to avoid log spam
sched_ext: Fix missing post-enqueue handling in move_local_task_to_local_dsq()
sched_ext: Factor out local_dsq_post_enq() from dispatch_enqueue()
sched_ext: Fix bypass depth leak on scx_enable() failure
sched/ext: Avoid null ptr traversal when ->put_prev_task() is called with NULL next
sched_ext: Fix the memleak for sch->helper objects
Linus Torvalds [Tue, 16 Dec 2025 07:21:17 +0000 (19:21 +1200)]
Merge tag 'cgroup-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
- Fix a race condition in css_rstat_updated() where CMPXCHG without
LOCK prefix could cause lnode corruption when the flusher runs
concurrently on another CPU. The issue was introduced in 6.17 and
causes memcg stats to become corrupted in production.
* tag 'cgroup-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: use LOCK CMPXCHG in css_rstat_updated
Al Viro [Sat, 13 Dec 2025 22:50:23 +0000 (17:50 -0500)]
shmem: fix recovery on rename failures
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets") Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jason Gunthorpe [Fri, 5 Dec 2025 18:56:12 +0000 (14:56 -0400)]
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
GCC gets a bit confused and reports:
In function '_test_cmd_get_hw_info',
inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3,
inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1:
>> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=]
804 | assert(!info->flags);
| ~~~~^~~~~~~
iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info':
iommufd.c:761:11: note: object 'buffer_smaller' of size 4
761 | } buffer_smaller;
| ^~~~~~~~~~~~~~
While it is true that "struct iommu_test_hw_info[0]" is partly out of
bounds of the input pointer, it is not true that info->flags is out of
bounds. Unclear why it warns on this.
Reuse an existing properly sized stack buffer and pass a truncated length
instead to test the same thing.
Fixes: af4fde93c319 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl") Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Arnd Bergmann [Thu, 4 Dec 2025 10:03:29 +0000 (11:03 +0100)]
iommufd: Fix building without dmabuf
When DMABUF is disabled, trying to use it causes a link failure:
x86_64-linux-ld: drivers/iommu/iommufd/io_pagetable.o: in function `iopt_map_file_pages':
io_pagetable.c:(.text+0x1735): undefined reference to `dma_buf_get'
x86_64-linux-ld: io_pagetable.c:(.text+0x1775): undefined reference to `dma_buf_put'
Florian Westphal [Thu, 11 Dec 2025 11:55:19 +0000 (12:55 +0100)]
netfilter: nf_tables: avoid softlockup warnings in nft_chain_validate
This reverts commit 314c82841602 ("netfilter: nf_tables: can't schedule in nft_chain_validate"):
Since commit a60a5abe19d6 ("netfilter: nf_tables: allow iter callbacks to sleep")
the iterator callback is invoked without rcu read lock held, so this
cond_resched() is now valid.
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location.
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Closes: https://lore.kernel.org/netfilter-devel/20251118221735.GA5477@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/ Tested-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Signed-off-by: Florian Westphal <fw@strlen.de>
Sumeet Pawnikar [Sun, 7 Dec 2025 15:15:48 +0000 (20:45 +0530)]
powercap: fix sscanf() error return value handling
Fix inconsistent error handling for sscanf() return value check.
Implicit boolean conversion is used instead of explicit return
value checks. The code checks if (!sscanf(...)) which is incorrect
because:
1. sscanf returns the number of successfully parsed items
2. On success, it returns 1 (one item passed)
3. On failure, it returns 0 or EOF
4. The check 'if (!sscanf(...))' is wrong because it treats
success (1) as failure
All occurrences of sscanf() now uses explicit return value check.
With this behavior it returns '-EINVAL' when parsing fails (returns
0 or EOF), and continues when parsing succeeds (returns 1).
Sumeet Pawnikar [Fri, 5 Dec 2025 19:02:16 +0000 (00:32 +0530)]
powercap: fix race condition in register_control_type()
The device becomes visible to userspace via device_register()
even before it fully initialized by idr_init(). If userspace
or another thread tries to register a zone immediately after
device_register(), the control_type_valid() will fail because
the control_type is not yet in the list. The IDR is not yet
initialized, so this race condition causes zone registration
failure.
Move idr_init() and list addition before device_register()
fix the race condition.
fs: send fsnotify_xattr()/IN_ATTRIB from vfs_fileattr_set()/chattr(1)
Currently it seems impossible to observe these changes to the file's
attributes. It's useful to be able to do this to see when the file
becomes immutable, for example, so emit IN_ATTRIB via fsnotify_xattr(),
like when changing other inode attributes.
Amir Goldstein [Sun, 7 Dec 2025 10:44:55 +0000 (11:44 +0100)]
fsnotify: do not generate ACCESS/MODIFY events on child for special files
inotify/fanotify do not allow users with no read access to a file to
subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the
same user to subscribe for watching events on children when the user
has access to the parent directory (e.g. /dev).
Users with no read access to a file but with read access to its parent
directory can still stat the file and see if it was accessed/modified
via atime/mtime change.
The same is not true for special files (e.g. /dev/null). Users will not
generally observe atime/mtime changes when other users read/write to
special files, only when someone sets atime/mtime via utimensat().
Align fsnotify events with this stat behavior and do not generate
ACCESS/MODIFY events to parent watchers on read/write of special files.
The events are still generated to parent watchers on utimensat(). This
closes some side-channels that could be possibly used for information
exfiltration [1].
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at> CC: stable@vger.kernel.org Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
Namjae Jeon [Sun, 14 Dec 2025 06:06:34 +0000 (15:06 +0900)]
ksmbd: fix buffer validation by including null terminator size in EA length
The smb2_set_ea function, which handles Extended Attributes (EA),
was performing buffer validation checks that incorrectly omitted the size
of the null terminating character (+1 byte) for EA Name.
This patch fixes the issue by explicitly adding '+ 1' to EaNameLength where
the null terminator is expected to be present in the buffer, ensuring
the validation accurately reflects the total required buffer size.
Cc: stable@vger.kernel.org Reported-by: Roger <roger.andersen@protonmail.com> Reported-by: Stanislas Polu <spolu@dust.tt> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sun, 14 Dec 2025 06:05:56 +0000 (15:05 +0900)]
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session.
Cc: stable@vger.kernel.org Reported-by: Alexandre <roger.andersen@protonmail.com> Reported-by: Stanislas Polu <spolu@dust.tt> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Chen Ni [Tue, 18 Nov 2025 01:32:29 +0000 (09:32 +0800)]
ksmbd: convert comma to semicolon
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: defer the initial recv completion logic to smb_direct_negotiate_recv_work()
The previous change to relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in
recv_done() and smb_direct_cm_handler() seems to work around the
problem that the order of initial recv completion and
RDMA_CM_EVENT_ESTABLISHED is random, but it's still
a bit ugly.
This implements a better solution deferring the recv completion
processing to smb_direct_negotiate_recv_work(), which is queued
only if both events arrived.
In order to avoid more basic changes to the main recv_done
callback, I introduced a smb_direct_negotiate_recv_done,
which is only used for the first pdu, this will allow
further cleanup and simplifications in recv_done
as a future patch.
smb_direct_negotiate_recv_work() is also very basic
with only basic error checking and the transition
from SMBDIRECT_SOCKET_NEGOTIATE_NEEDED to
SMBDIRECT_SOCKET_NEGOTIATE_RUNNING, which allows
smb_direct_prepare() to continue as before.
Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: initialize recv_io->cqe.done = recv_done just once
smbdirect_recv_io structures are pre-allocated so we can set the
callback function just once.
This will make it easy to move smb_direct_post_recv to common code
soon.
Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This will first be used by the server in order to defer
the processing of the initial recv of the negotiation
request.
But in future it will also be used by the client in order
to implement an async connect.
Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Jens Remus [Thu, 11 Dec 2025 11:24:50 +0000 (12:24 +0100)]
s390/stacktrace: Do not fallback to RA register
The logic to fallback to the return address (RA) register value in
the topmost frame when stack tracing using back chain is broken in
multiple ways:
When assuming the RA register 14 has not been saved yet one must assume
that a new user stack frame has not been allocated either. Therefore
the back chain would not contain the stack pointer (SP) at entry, but
the caller's SP at its entry instead.
Therefore when falling back to the RA register 14 value it would also be
necessary to fallback to the SP register 15 value. Otherwise an invalid
combination of RA register 14 and caller's SP at its entry (from the
back chain) is used.
In the topmost frame the back chain contains either the caller's SP at
its entry (before having allocated a new stack frame in the prologue),
the SP at entry (after having allocated a new stack frame), or an
uninitialized value (during static/dynamic stack allocation). In both
cases where the back chain is valid either the caller or prologue must
have saved its respective RA to the respective frame. Therefore, if the
RA obtained from the frame pointed to by the back chain is invalid, this
does not indicate that the IP in the topmost frame is still early in the
prologue and the RA has not been saved.
Benjamin Block [Fri, 5 Dec 2025 15:47:17 +0000 (16:47 +0100)]
s390/pci: Fix cyclic dead-lock in zpci_zdev_put() and zpci_scan_devices()
When triggering PCI device recovery by writing into the SysFS attribute
`recover` of a Physical Function with existing child SR-IOV Virtual
Functions, lockdep is reporting a possible deadlock between three
threads:
In zpci_bus_scan_busses() the `zbus_list_lock` is taken for the whole
duration of the function, which also includes taking
`pci_rescan_remove_lock`, among other things. But `zbus_list_lock` only
really needs to protect the modification of the global registration
`zbus_list`, it can be dropped while the functions within the list
iteration run; this way we break the cycle above.
Break up zpci_bus_scan_busses() into an "iterator" zpci_bus_get_next()
that iterates over `zbus_list` element by element, and acquires and
releases `zbus_list_lock` as necessary, but never keep holding it.
References to `zpci_bus` objects are also acquired and released.
The reference counting on `zpci_bus` objects is also changed so that all
put() and get() operations are done under the protection of
`zbus_list_lock`, and if the operation results in a modification of
`zpci_bus_list`, this modification is done in the same critical section
(apart the very first initialization). This way objects are never seen
on the list that are about to be released and/or half-initialized.
Fixes: 14c87ba8123a ("s390/pci: separate zbus registration from scanning") Suggested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sven Schnelle [Fri, 5 Dec 2025 09:58:57 +0000 (10:58 +0100)]
s390/ipl: Clear SBP flag when bootprog is set
With z16 a new flag 'search boot program' was introduced for
list-directed IPL (SCSI, NVMe, ECKD DASD). If this flag is set,
e.g. via selecting the "Automatic" value for the "Boot program
selector" control on an HMC load panel, it is copied to the reipl
structure from the initial ipl structure. When a user now sets a
boot prog via sysfs, the flag is not cleared and the bootloader
will again automatically select the boot program, ignoring user
configuration.
To avoid that, clear the SBP flag when a bootprog sysfs file is
written.
Cc: stable@vger.kernel.org Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
projects / thirdparty / linux.git / log
