[30/46] Use stmt_vec_infos rather than gimple stmts for worklists
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vect_analyze_scalar_cycles_1): Change the type
of the worklist from a vector of gimple stmts to a vector of
stmt_vec_infos.
* tree-vect-stmts.c (vect_mark_relevant, process_use)
(vect_mark_stmts_to_be_vectorized): Likewise
[29/46] Use stmt_vec_info instead of gimple stmts internally (part 2)
This second part handles the less mechnical cases, i.e. those that don't
just involve swapping a gimple stmt for an existing stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vect_analyze_loop_operations): Look up the
statement before passing it to vect_analyze_stmt.
(vect_create_epilog_for_reduction): Use a stmt_vec_info to walk
the chain of phi vector definitions. Track the exit phi via its
stmt_vec_info.
(vectorizable_reduction): Set cond_stmt_vinfo directly from the
STMT_VINFO_REDUC_DEF.
* tree-vect-slp.c (vect_get_place_in_interleaving_chain): Use
stmt_vec_infos to handle the statement chains.
(vect_get_slp_defs): Record the first statement in the node
using a stmt_vec_info.
* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized): Look up
statements here and pass their stmt_vec_info down to subroutines.
(vect_init_vector_1): Hoist call to vinfo_for_stmt and pass it
down to vect_finish_stmt_generation.
(vect_init_vector, vect_get_vec_defs, vect_finish_replace_stmt)
(vect_finish_stmt_generation): Call vinfo_for_stmt and pass
stmt_vec_infos to subroutines.
(vect_remove_stores): Use stmt_vec_infos to handle the statement
chains.
[28/46] Use stmt_vec_info instead of gimple stmts internally (part 1)
This first part makes functions use stmt_vec_infos instead of
gimple stmts in cases where the stmt_vec_info was already available
and where the change is mechanical. Most of it is just replacing
"stmt" with "stmt_info".
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
Various places called vect_dr_stmt or vinfo_for_stmt multiple times
on the same input. This patch makes them reuse the earlier result.
It also splits a couple of single vinfo_for_stmt calls out into
separate statements so that they can be reused in later patches.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
If we use stmt_vec_infos to represent statements in the vectoriser,
it's then more natural to use dyn_cast when processing the statement
as an assignment, call, etc. This patch does that in a few more places.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-data-refs.c (vect_check_gather_scatter): Pass the
gcall rather than the generic gimple stmt to gimple_call_internal_fn.
(vect_get_smallest_scalar_type, can_group_stmts_p): Use dyn_cast
to get gassigns and gcalls, rather than operating on generc gimple
stmts.
* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p)
(vect_mark_stmts_to_be_vectorized, vectorizable_store)
(vectorizable_load, vect_analyze_stmt): Likewise.
* tree-vect-loop.c (vectorizable_reduction): Likewise gphi.
[25/46] Make get_earlier/later_stmt take and return stmt_vec_infos
...and also make vect_find_last_scalar_stmt_in_slp return a stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (get_earlier_stmt, get_later_stmt): Take and
return stmt_vec_infos rather than gimple stmts. Do not accept
null arguments.
(vect_find_last_scalar_stmt_in_slp): Return a stmt_vec_info instead
of a gimple stmt.
* tree-vect-slp.c (vect_find_last_scalar_stmt_in_slp): Likewise.
Update use of get_later_stmt.
(vect_get_constant_vectors): Update call accordingly.
(vect_schedule_slp_instance): Likewise
* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Likewise.
(vect_slp_analyze_instance_dependence): Likewise.
(vect_preserves_scalar_order_p): Update use of get_earlier_stmt.
[24/46] Make stmt_info_for_cost use a stmt_vec_info
This patch makes stmt_info_for_cost carry a stmt_vec_info instead
of a gimple stmt. The structure is internal to the vectoriser,
so targets aren't affected.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
[22/46] Make DR_GROUP_SAME_DR_STMT a stmt_vec_info
This patch changes STMT_VINFO_SAME_DR_STMT from a gimple stmt to a
stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::same_dr_stmt): Change from
a gimple stmt to a stmt_vec_info.
* tree-vect-stmts.c (vectorizable_load): Update accordingly.
[21/46] Make grouped_stores and reduction_chains use stmt_vec_infos
This patch changes the SLP lists grouped_stores and reduction_chains
from auto_vec<gimple *> to auto_vec<stmt_vec_info>. It was easier
to do them together due to the way vect_analyze_slp is structured.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::grouped_stores): Change from
an auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
(_loop_vec_info::reduction_chains): Likewise.
* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns): Update
accordingly.
* tree-vect-slp.c (vect_analyze_slp): Likewise.
This patch makes vect_dr_stmt return a stmt_vec_info instead of a
gimple stmt. Rather than retain a separate gimple stmt variable
in cases where both existed, the patch replaces uses of the gimple
variable with the uses of the stmt_vec_info. Later patches do this
more generally.
Many things that are keyed off a data_reference would these days
be better keyed off a stmt_vec_info, but it's more convenient
to do that later in the series. The vect_dr_size calls that are
left over do still benefit from this patch.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_dr_stmt): Return a stmt_vec_info rather
than a gimple stmt.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
(vect_slp_analyze_data_ref_dependence, vect_record_base_alignments)
(vect_calculate_target_alignmentm, vect_compute_data_ref_alignment)
(vect_update_misalignment_for_peel, vect_verify_datarefs_alignment)
(vector_alignment_reachable_p, vect_get_data_access_cost)
(vect_get_peeling_costs_all_drs, vect_peeling_hash_get_lowest_cost)
(vect_peeling_supportable, vect_enhance_data_refs_alignment)
(vect_find_same_alignment_drs, vect_analyze_data_refs_alignment)
(vect_analyze_group_access_1, vect_analyze_group_access)
(vect_analyze_data_ref_access, vect_analyze_data_ref_accesses)
(vect_vfa_access_size, vect_small_gap_p, vect_analyze_data_refs)
(vect_supportable_dr_alignment): Remove vinfo_for_stmt from the
result of vect_dr_stmt and use the stmt_vec_info instead of
the associated gimple stmt.
* tree-vect-loop-manip.c (get_misalign_in_elems): Likewise.
(vect_gen_prolog_loop_niters): Likewise.
* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
[18/46] Make SLP_TREE_SCALAR_STMTS a vec<stmt_vec_info>
This patch changes SLP_TREE_SCALAR_STMTS from a vec<gimple *> to
a vec<stmt_vec_info>. It's longer than the previous conversions
but mostly mechanical.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_slp_tree::stmts): Change from a vec<gimple *>
to a vec<stmt_vec_info>.
* tree-vect-slp.c (vect_free_slp_tree): Update accordingly.
(vect_create_new_slp_node): Take a vec<gimple *> instead of a
vec<stmt_vec_info>.
(_slp_oprnd_info::def_stmts): Change from a vec<gimple *>
to a vec<stmt_vec_info>.
(bst_traits::value_type, bst_traits::value_type): Likewise.
(bst_traits::hash): Update accordingly.
(vect_get_and_check_slp_defs): Change the stmts parameter from
a vec<gimple *> to a vec<stmt_vec_info>.
(vect_two_operations_perm_ok_p, vect_build_slp_tree_1): Likewise.
(vect_build_slp_tree): Likewise.
(vect_build_slp_tree_2): Likewise. Update uses of
SLP_TREE_SCALAR_STMTS.
(vect_print_slp_tree): Update uses of SLP_TREE_SCALAR_STMTS.
(vect_mark_slp_stmts, vect_mark_slp_stmts_relevant)
(vect_slp_rearrange_stmts, vect_attempt_slp_rearrange_stmts)
(vect_supported_load_permutation_p, vect_find_last_scalar_stmt_in_slp)
(vect_detect_hybrid_slp_stmts, vect_slp_analyze_node_operations_1)
(vect_slp_analyze_node_operations, vect_slp_analyze_operations)
(vect_bb_slp_scalar_cost, vect_slp_analyze_bb_1)
(vect_get_constant_vectors, vect_get_slp_defs)
(vect_transform_slp_perm_load, vect_schedule_slp_instance)
(vect_remove_slp_scalar_calls, vect_schedule_slp): Likewise.
(vect_analyze_slp_instance): Build up a vec of stmt_vec_infos
instead of gimple stmts.
* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Change
the stores parameter for a vec<gimple *> to a vec<stmt_vec_info>.
(vect_slp_analyze_instance_dependence): Update uses of
SLP_TREE_SCALAR_STMTS.
(vect_slp_analyze_and_verify_node_alignment): Likewise.
(vect_slp_analyze_and_verify_instance_alignment): Likewise.
* tree-vect-loop.c (neutral_op_for_slp_reduction): Likewise.
(get_initial_defs_for_reduction): Likewise.
(vect_create_epilog_for_reduction): Likewise.
(vectorize_fold_left_reduction): Likewise.
* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
(vect_model_simple_cost, vectorizable_shift, vectorizable_load)
(can_vectorize_live_stmts): Likewise.
[17/46] Make LOOP_VINFO_REDUCTIONS an auto_vec<stmt_vec_info>
This patch changes LOOP_VINFO_REDUCTIONS from an auto_vec<gimple *>
to an auto_vec<stmt_vec_info>. It also changes the associated
vect_force_simple_reduction so that it takes and returns stmt_vec_infos
instead of gimple stmts.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_loop_vec_info::reductions): Change from an
auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
(vect_force_simple_reduction): Take and return stmt_vec_infos rather
than gimple stmts.
* tree-parloops.c (valid_reduction_p): Take a stmt_vec_info instead
of a gimple stmt.
(gather_scalar_reductions): Update after above interface changes.
* tree-vect-loop.c (vect_analyze_scalar_cycles_1): Likewise.
(vect_is_simple_reduction): Take and return stmt_vec_infos rather
than gimple stmts.
(vect_force_simple_reduction): Likewise.
* tree-vect-patterns.c (vect_pattern_recog_1): Update use of
LOOP_VINFO_REDUCTIONS.
* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
This patch changes STMT_VINFO_REDUC_DEF from a gimple stmt to a
stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::reduc_def): Change from
a gimple stmt to a stmt_vec_info.
* tree-vect-loop.c (vect_active_double_reduction_p)
(vect_force_simple_reduction, vectorizable_reduction): Update
accordingly.
[15/46] Make SLP_TREE_VEC_STMTS a vec<stmt_vec_info>
This patch changes SLP_TREE_VEC_STMTS from a vec<gimple *> to a
vec<stmt_vec_info>. This involved making the same change to the
phis vector in vectorizable_reduction, since SLP_TREE_VEC_STMTS is
spliced into it here:
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_slp_tree::vec_stmts): Change from a
vec<gimple *> to a vec<stmt_vec_info>.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Change
the reduction_phis argument from a vec<gimple *> to a
vec<stmt_vec_info>.
(vectorizable_reduction): Likewise the phis local variable that
is passed to vect_create_epilog_for_reduction. Update for new type
of SLP_TREE_VEC_STMTS.
(vectorizable_induction): Update for new type of SLP_TREE_VEC_STMTS.
(vectorizable_live_operation): Likewise.
* tree-vect-slp.c (vect_get_slp_vect_defs): Likewise.
(vect_transform_slp_perm_load, vect_schedule_slp_instance): Likewise.
This patch changes STMT_VINFO_VEC_STMT from a gimple stmt to a
stmt_vec_info and makes the vectorizable_* routines pass back
a stmt_vec_info to vect_transform_stmt.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::vectorized_stmt): Change from
a gimple stmt to a stmt_vec_info.
(vectorizable_condition, vectorizable_live_operation)
(vectorizable_reduction, vectorizable_induction): Pass back the
vectorized statement as a stmt_vec_info.
* tree-vect-data-refs.c (vect_record_grouped_load_vectors): Update
use of STMT_VINFO_VEC_STMT.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise,
accumulating the inner phis that feed the STMT_VINFO_VEC_STMT
as stmt_vec_infos rather than gimple stmts.
(vectorize_fold_left_reduction): Change vec_stmt from a gimple stmt
to a stmt_vec_info.
(vectorizable_live_operation): Likewise.
(vectorizable_reduction, vectorizable_induction): Likewise,
updating use of STMT_VINFO_VEC_STMT.
* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Update use
of STMT_VINFO_VEC_STMT.
(vect_build_gather_load_calls, vectorizable_bswap, vectorizable_call)
(vectorizable_simd_clone_call, vectorizable_conversion)
(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
(vectorizable_store, vectorizable_load, vectorizable_condition)
(vectorizable_comparison, can_vectorize_live_stmts): Change vec_stmt
from a gimple stmt to a stmt_vec_info.
(vect_transform_stmt): Update use of STMT_VINFO_VEC_STMT. Pass a
pointer to a stmt_vec_info to the vectorizable_* routines.
[12/46] Make vect_finish_stmt_generation return a stmt_vec_info
This patch makes vect_finish_replace_stmt and vect_finish_stmt_generation
return the stmt_vec_info for the vectorised statement, so that the caller
doesn't need a separate vinfo_for_stmt to get at it.
This involved changing the structure of the statement-generating loops
so that they use narrow scopes for the vectorised gimple statements
and use the existing (wider) scopes for the associated stmt_vec_infos.
This helps with gimple stmt->stmt_vec_info changes further down the line.
The way we do this generation is another area ripe for clean-up,
but that's too much of a rabbit-hole for this series.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_finish_replace_stmt): Return a stmt_vec_info
(vect_finish_stmt_generation): Likewise.
* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
(vect_finish_replace_stmt, vect_finish_stmt_generation): Likewise.
(vect_build_gather_load_calls): Use the return value of the above
functions instead of a separate call to vinfo_for_stmt. Use narrow
scopes for the input gimple stmt and wider scopes for the associated
stmt_vec_info. Use vec_info::lookup_def when setting these
stmt_vec_infos from an SSA_NAME definition.
(vectorizable_bswap, vectorizable_call, vectorizable_simd_clone_call)
(vect_create_vectorized_demotion_stmts, vectorizable_conversion)
(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
(vectorizable_store, vectorizable_load, vectorizable_condition)
(vectorizable_comparison): Likewise.
* tree-vect-loop.c (vectorize_fold_left_reduction): Likewise.
(vectorizable_reduction): Likewise.
[11/46] Pass back a stmt_vec_info from vect_is_simple_use
This patch makes vect_is_simple_use pass back a stmt_vec_info to
those callers that want it. Most users only need the stmt_vec_info
but some need the gimple stmt too.
It's probably high time we added a class to represent "simple operands"
instead, but I have a separate series that tries to clean up how
operands are handled (with a view to allowing mixed vector sizes).
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
This patch turns stmt_vec_info into an unspeakably bad wrapper class
and adds an implicit conversion to the associated gimple stmt.
Having this conversion makes the rest of the series easier to write,
but since the class goes away again at the end of the series, I've
not bothered adding any comments or tried to make it pretty.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (stmt_vec_info): Temporarily change from
a typedef to a wrapper class.
(NULL_STMT_VEC_INFO): New macro.
(vec_info::stmt_infos): Change to vec<stmt_vec_info>.
(stmt_vec_info::operator*): New function.
(stmt_vec_info::operator gimple *): Likewise.
(set_vinfo_for_stmt): Use NULL_STMT_VEC_INFO.
(add_stmt_costs): Likewise.
* tree-vect-loop-manip.c (iv_phi_p): Likewise.
* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost)
(vect_get_known_peeling_cost): Likewise.
(vect_estimate_min_profitable_iters): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
* tree-vect-slp.c (vect_remove_slp_scalar_calls): Likewise.
* tree-vect-stmts.c (vect_build_gather_load_calls): Likewise.
(vectorizable_store, free_stmt_vec_infos): Likewise.
(new_stmt_vec_info): Change return type of xcalloc to
_stmt_vec_info *.
This patch adds a helper function for seeing whether there is a single
user of an SSA name, and whether that user has a stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::lookup_single_use): Declare.
* tree-vectorizer.c (vec_info::lookup_single_use): New function.
* tree-vect-loop.c (vectorizable_reduction): Use it instead of
a single_imm_use-based sequence.
* tree-vect-stmts.c (supportable_widening_operation): Likewise.
This patch adds a vec_info replacement for vinfo_for_stmt. The main
difference is that the new routine can cope with arbitrary statements,
so there's no need to call vect_stmt_in_region_p first.
The patch only converts calls that are still needed at the end of the
series. Later patches get rid of most other calls to vinfo_for_stmt.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::lookup_stmt): Declare.
* tree-vectorizer.c (vec_info::lookup_stmt): New function.
* tree-vect-loop.c (vect_determine_vf_for_stmt): Use it instead
of vinfo_for_stmt.
(vect_determine_vectorization_factor, vect_analyze_scalar_cycles_1)
(vect_compute_single_scalar_iteration_cost, vect_analyze_loop_form)
(vect_update_vf_for_slp, vect_analyze_loop_operations)
(vect_is_slp_reduction, vectorizable_induction)
(vect_transform_loop_stmt, vect_transform_loop): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt):
(vect_determine_min_output_precision_1, vect_determine_precisions)
(vect_pattern_recog): Likewise.
* tree-vect-stmts.c (vect_analyze_stmt, vect_transform_stmt): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_density_test): Likewise.
* config/rs6000/rs6000.c (rs6000_density_test): Likewise.
* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Likewise.
(vect_detect_hybrid_slp_1, vect_detect_hybrid_slp_2)
(vect_detect_hybrid_slp): Likewise. Change the walk_stmt_info
info field from a loop to a loop_vec_info.
This patch adds a vec_info function for allocating and setting
stmt_vec_infos. It's the start of a long process of removing
the global stmt_vec_info array.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (stmt_vec_info): Move typedef earlier in file.
(vec_info::add_stmt): Declare.
* tree-vectorizer.c (vec_info::add_stmt): New function.
* tree-vect-data-refs.c (vect_create_data_ref_ptr): Use it.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Likewise.
(vect_create_epilog_for_reduction, vectorizable_reduction): Likewise.
(vectorizable_induction): Likewise.
* tree-vect-slp.c (_bb_vec_info::_bb_vec_info): Likewise.
* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
(vectorizable_simd_clone_call, vectorizable_store): Likewise.
(vectorizable_load): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
(vect_recog_bool_pattern, vect_recog_mask_conversion_pattern)
(vect_recog_gather_scatter_pattern): Likewise.
(append_pattern_def_seq): Likewise. Remove a check that is
performed by add_stmt itself.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vect_valid_reduction_input_p): New function,
split out from...
(vect_is_slp_reduction): ...here...
(vect_is_simple_reduction): ...and here. Remove repetition of tests
that are already known to be false.
gimple *stmt;
FOR_EACH_VEC_ELT (SLP_TREE_SCALAR_STMTS (node), i, stmt)
/* After transform some stmts are removed and thus their vinfo is gone. */
if (vinfo_for_stmt (stmt))
{
gcc_assert (STMT_VINFO_NUM_SLP_USES (vinfo_for_stmt (stmt)) > 0);
STMT_VINFO_NUM_SLP_USES (vinfo_for_stmt (stmt))--;
}
But after transform this update is redundant even for statements that do
exist, so it seems better to skip this loop for the final teardown.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_free_slp_instance): Add a final_p parameter.
* tree-vect-slp.c (vect_free_slp_tree): Likewise. Don't update
STMT_VINFO_NUM_SLP_USES when it's true.
(vect_free_slp_instance): Add a final_p parameter and pass it to
vect_free_slp_tree.
(vect_build_slp_tree_2): Update call to vect_free_slp_instance.
(vect_analyze_slp_instance): Likewise.
(vect_slp_analyze_operations): Likewise.
(vect_slp_analyze_bb_1): Likewise.
* tree-vectorizer.c (vec_info): Likewise.
* tree-vect-loop.c (vect_transform_loop): Likewise.
vectorizable_reduction has old code to cope with cases in which the
given statement belongs to a reduction group but isn't the first statement.
That can no longer happen, since all statements in the group go into the
same SLP node, and we only check the first statement in each node.
The point is to remove the only path through vectorizable_reduction
in which stmt and stmt_info refer to different statements.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Assert that the
function is not called for second and subsequent members of
a reduction group.
[01/46] Move special cases out of get_initial_def_for_reduction
This minor clean-up avoids repeating the test for double reductions
and also moves the vect_get_vec_def_for_operand call to the same
function as the corresponding vect_get_vec_def_for_stmt_copy.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (get_initial_def_for_reduction): Move special
cases for nested loops from here to ...
(vect_create_epilog_for_reduction): ...here. Only call
vect_is_simple_use for inner-loop reductions.
Jakub Jelinek [Tue, 31 Jul 2018 14:19:26 +0000 (16:19 +0200)]
P1008R1 - prohibit aggregates with user-declared constructors
P1008R1 - prohibit aggregates with user-declared constructors
* class.c (check_bases_and_members): For C++2a set
CLASSTYPE_NON_AGGREGATE based on TYPE_HAS_USER_CONSTRUCTOR rather than
type_has_user_provided_or_explicit_constructor.
* g++.dg/ext/is_aggregate.C: Add tests with deleted or defaulted ctor.
* g++.dg/cpp0x/defaulted1.C (main): Ifdef out for C++2a B b = {1};.
* g++.dg/cpp0x/deleted2.C: Expect error for C++2a.
* g++.dg/cpp2a/aggr1.C: New test.
* g++.dg/cpp2a/aggr2.C: New test.
Martin Liska [Tue, 31 Jul 2018 10:34:36 +0000 (12:34 +0200)]
GCOV: add cache for streamed locations.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/85338
PR gcov-profile/85350
PR gcov-profile/85372
* profile.c (struct location_triplet): New.
(struct location_triplet_hash): Likewise.
(output_location): Do not output a BB that
is already recorded for a line.
(branch_prob): Use streamed_locations.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/85338
PR gcov-profile/85350
PR gcov-profile/85372
* gcc.misc-tests/gcov-pr85338.c: New test.
* gcc.misc-tests/gcov-pr85350.c: New test.
* gcc.misc-tests/gcov-pr85372.c: New test.
Martin Liska [Tue, 31 Jul 2018 10:33:21 +0000 (12:33 +0200)]
Fix GCOV CFG related issues.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/83813
PR gcov-profile/84758
PR gcov-profile/85217
PR gcov-profile/85332
* profile.c (branch_prob): Do not record GOTO expressions
for GIMPLE statements which locations are already streamed.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/83813
PR gcov-profile/84758
PR gcov-profile/85217
PR gcov-profile/85332
* gcc.misc-tests/gcov-pr83813.c: New test.
* gcc.misc-tests/gcov-pr84758.c: New test.
* gcc.misc-tests/gcov-pr85217.c: New test.
* gcc.misc-tests/gcov-pr85332.c: New test.
Ed Schonberg [Tue, 31 Jul 2018 09:56:43 +0000 (09:56 +0000)]
[Ada] Unnesting: improve support for entries in protected objects
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_unst.adb (Subp_Index): In the case of a protected
operation, the relevant entry is the generated
protected_subprogram_body into which the original body is
rewritten. Assorted cleanup and optimizations.
Ed Schonberg [Tue, 31 Jul 2018 09:56:36 +0000 (09:56 +0000)]
[Ada] Refine generation of range checks to happen in front end
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_attr.adb (Expand_Attribute, case Fixed_Value): Set the
base type of the result to ensure that proper overflow and range
checks are generated. If the target is a fixed-point tyoe,
generate the required overflow and range checks explicitly,
rather than relying on Apply_Type_Conversion_Checks, which might
simply set the Do_Range_Check flag and rely on the backend to
add the check.
[Ada] Secondary stack leak with access-to-subprogram
This patch modifies call resolution to recognize when the designated type of
an access-to-subprogram requires secondary stack management, and establish
the proper transient block.
------------
-- Source --
------------
-- leak7.adb
procedure Leak7 is
Max_Iterations : constant := 10_000;
function Func return String is
begin
return "Will this leak? Or will it dry?";
end Func;
type Func_Ptr is access function return String;
procedure Anonymous_Leak (Func : access function return String) is
begin
for Iteration in 1 .. Max_Iterations loop
declare
Val : constant String := Func.all;
begin null; end;
end loop;
end Anonymous_Leak;
procedure Named_Leak (Func : Func_Ptr) is
begin
for Iteration in 1 .. Max_Iterations loop
declare
Val : constant String := Func.all;
begin null; end;
end loop;
end Named_Leak;
begin
Anonymous_Leak (Func'Access);
Named_Leak (Func'Access);
end Leak7;
----------------------------
-- Compilation and output --
----------------------------
* sem_res.adb (Resolve_Call): Establish a transient scope to
manage the secondary stack when the designated type of an
access-to-subprogram requires it.
Ed Schonberg [Tue, 31 Jul 2018 09:56:26 +0000 (09:56 +0000)]
[Ada] Unnesting: find local subps in nested stmt sequences
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada
* exp_ch7.adb (Check_Unnesting_Elaboration_Code): To find local
subprograms in the elaboration code for a package body, recurse
through nested statement sequences because a compiler-generated
procedure may appear within a condition statement.
Ed Schonberg [Tue, 31 Jul 2018 09:56:21 +0000 (09:56 +0000)]
[Ada] Spurious error on default parameter in protected operation
This patch fixes a spurious compiler error on a call to a protected
operation whose profile includes a defaulted in-parameter that is a call
to another protected function of the same object.
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_ch6.adb (Expand_Protected_Subprogram_Call): Handle
properly a protected call that includes a default parameter that
is a call to a protected function of the same type.
gcc/testsuite/
* gnat.dg/prot5.adb, gnat.dg/prot5_pkg.adb,
gnat.dg/prot5_pkg.ads: New testcase.
This patch corrects an issue whereby building a multi-unit compilation with
missing sources resulted in a cryptic "code generation" error instead of the
appropriate file not found error.
------------
-- Source --
------------
-- main.adb
with Types;
procedure Main is
begin
null;
end;
-- types.ads
package Types is
procedure Force;
end;
----------------------------
-- Compilation and output --
----------------------------
& gnatmake -q main.adb
gnatmake: "types.adb" not found
2018-07-31 Justin Squirek <squirek@adacore.com>
gcc/ada/
* lib-writ.adb (Write_With_Lines): Modfiy the generation of
dependencies within ali files so that source unit bodies are
properly listed even if said bodies are missing. Perform legacy
behavior in GNATprove mode.
* lib-writ.ads: Modify documentation to reflect current behavior.
Eric Botcazou [Tue, 31 Jul 2018 09:56:10 +0000 (09:56 +0000)]
[Ada] Fix alignment of mutex_t and cond_t type on 32-bit SPARC/Solaris
The alignment of the couple of types from System.OS_Interface was wrongly
set to 4 (32-bit) instead of 8 (64-bit) in 32-bit mode.
2018-07-31 Eric Botcazou <ebotcazou@adacore.com>
gcc/ada/
* libgnarl/s-osinte__solaris.ads (upad64_t): New private type.
(mutex_t): Use it for 'lock' and 'data' components.
(cond_t): Likewise for 'data' and use single 'flags' component.
[Ada] Wrong value after assignment of overlain record objects
This patch corrects an issue whereby objects of a record type with a
representation clause which are overlain by address would fail to get
assigned values properly when one or both of said objects were marked
volatile.
2018-07-31 Justin Squirek <squirek@adacore.com>
gcc/ada/
* exp_ch5.adb (Make_Field_Assign): Force temporarily generated
objects for assignment of overlaid user objects to be renamings
instead of constant declarations.
[Ada] Spurious error on the placement of aspect Global
This patch modifies the expansion of stand-alone subprogram bodies that appear
in the body of a protected type to properly associate aspects and pragmas to
the newly created spec for the subprogram body. As a result, the annotations
are properly associated with the initial declaration of the subprogram.
* exp_ch9.adb (Analyze_Pragmas): New routine.
(Build_Private_Protected_Declaration): Code clean up. Relocate
relevant aspects and pragmas from the stand-alone body to the
newly created spec. Explicitly analyze any pragmas that have
been either relocated or produced by the analysis of the
aspects.
(Move_Pragmas): New routine.
* sem_prag.adb (Find_Related_Declaration_Or_Body): Recognize the
case where a pragma applies to the internally created spec for a
stand-along subprogram body declared in a protected body.
gcc/testsuite/
* gnat.dg/global.adb, gnat.dg/global.ads: New testcase.
Gary Dismukes [Tue, 31 Jul 2018 09:55:53 +0000 (09:55 +0000)]
[Ada] Compiler failure on an extended_return_statement in a block
When compiling with an assertion-enabled compiler, Assert_Failure can be
raised when expanded an extended_return_statement whose enclosing scope
is not a function (such as when it's a block_statement). The simple fix
is to change the Assert to test Current_Subprogram rather than Current_Scope.
Three such Assert pragmas are corrected in this way.
2018-07-31 Gary Dismukes <dismukes@adacore.com>
gcc/ada/
* exp_ch6.adb (Expand_N_Extended_Return_Statement): Replace
calls to Current_Scope in three assertions with calls to
Current_Subprogram.
gcc/testsuite/
* gnat.dg/block_ext_return_assert_failure.adb: New testcase.
Ed Schonberg [Tue, 31 Jul 2018 09:55:48 +0000 (09:55 +0000)]
[Ada] Spurious warning on iteration over range of 64-bit modular type
This patch suppresses a spurious warning on the use of a 64-bit modular type
in a quantified expression, where the range of iteration will include a bound
that appears larger than the run-time representation of Universal_Integer'last.
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_eval.adb (Check_Non_Static_Context): Do not warn on an
integer literal greater than the upper bound of
Universal_Integer'Last when expansion is disabled, to avoid a
spurious warning over ranges involving 64-bit modular types.
Piotr Trojanek [Tue, 31 Jul 2018 09:55:37 +0000 (09:55 +0000)]
[Ada] Replace low-level calls to Ekind with high-level calls to Is_Formal
High-level wrappers are easier to read. This change came up while reading
some code related to GNATprove, but then uniformly applied to the entire
frontend. For the few remaining membership tests that could be replaced
by Is_Formal it is not obvious whether the high-level routine makes the
code better.
2018-07-31 Piotr Trojanek <trojanek@adacore.com>
gcc/ada/
* exp_aggr.adb, exp_ch4.adb, exp_ch6.adb, lib-xref.adb,
repinfo.adb, sem_ch9.adb: Minor replace Ekind membership tests
with a wrapper routine.
Piotr Trojanek [Tue, 31 Jul 2018 09:55:32 +0000 (09:55 +0000)]
[Ada] Deconstruct 'F' as a prefix for an ALI data
In GNATprove we used to store a variant of cross-reference information in
the ALI file in lines that started with an 'F' letter. This is no longer
the case, so the letter can be returned to the pool of unused prefixes.
2018-07-31 Piotr Trojanek <trojanek@adacore.com>
gcc/ada/
* ali.adb (Known_ALI_Lines): Remove 'F' as a prefix for lines
related to the FORMAL analysis done by GNATprove.
Javier Miranda [Tue, 31 Jul 2018 09:55:26 +0000 (09:55 +0000)]
[Ada] Fix a freezing issue
2018-07-31 Javier Miranda <miranda@adacore.com>
gcc/ada/
* sem.ads (Inside_Preanalysis_Without_Freezing): New global
counter.
* sem.adb (Semantics): This subprogram has now the
responsibility of resetting the counter before analyzing a unit,
and restoring its previous value before returning.
* freeze.adb (Freeze_Entity): Do not freeze if we are
preanalyzing without freezing.
* sem_res.adb (Preanalyze_And_Resolve): Set & restore
In_Preanalysis_Without_Freezing.
Ed Schonberg [Tue, 31 Jul 2018 09:55:21 +0000 (09:55 +0000)]
[Ada] Fix resolution of class-wide operations that are generic actuals
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_ch4.adb (Traverse_Homonyms): Consider generic actuals that
may rename a matching class-wide operation only if the renaming
declaration for that actual is in an enclosing scope (i.e.
within the corrresponding instance).
Bob Duff [Tue, 31 Jul 2018 09:55:11 +0000 (09:55 +0000)]
[Ada] Spurious error -- "allocation from empty storage pool"
This patch fixes a bug in which if "pragma Default_Storage_Pool (null);"
is given, then a build-in-place function will get an incorrect error
message "allocation from empty storage pool" even though there is no
such allocation in the source program.
2018-07-31 Bob Duff <duff@adacore.com>
gcc/ada/
* sem_res.adb (Resolve_Allocator): Do not complain about the
implicit allocator that occurs in the expansion of a return
statement for a build-in-place function.
Improve specs processing to allow %* in function arguments
2018-07-31 Olivier Hainque <hainque@adacore.com>
* gcc.c (handle_spec_function): Accept a soft_matched_part
argument, as do_spec_1. Pass it down to ...
(eval_spec_function): Accept a soft_matched_part argument,
and pass it down to ...
(do_spec_2): Accept a soft_matched_part argument, and pass
it down to do_spec_1.
(do_spec_1): Pass soft_matched_part to handle_spec_function.
(handle_braces): Update call to handle_spec_function.
(driver::set_up_specs): Update calls to do_spec_2.
(compare_debug_dump_opt_spec_function): Likewise.
(compare_debug_self_opt_spec_function): Likewise.
Andre Vieira [Tue, 31 Jul 2018 08:42:21 +0000 (08:42 +0000)]
Reverting 'AsyncI/O patch committed' as it is breaking bare-metal builds.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
This patch allows combine to combine two insns into two. This helps
in many cases, by reducing instruction path length, and also allowing
further combinations to happen. PR85160 is a typical example of code
that it can improve.
This patch does not allow such combinations if either of the original
instructions was a simple move instruction. In those cases combining
the two instructions increases register pressure without improving the
code. With this move test register pressure does no longer increase
noticably as far as I can tell.
(At first I also didn't allow either of the resulting insns to be a
move instruction. But that is actually a very good thing to have, as
should have been obvious).
PR rtl-optimization/85160
* combine.c (is_just_move): New function.
(try_combine): Allow combining two instructions into two if neither of
the original instructions was a move.
lra: consider clobbers when selecting hard_regno to spill
The idea behind the rclass loop in spill_hard_reg_in_range() seems to
be: find a hard_regno, which in general conflicts with reload regno,
but does not do so between `from` and `to`, and then do the live range
splitting based on this information. To check the absence of conflicts,
we make use of insn_bitmap, which does not contain insns which clobber
the hard_regno.
gcc/ChangeLog:
2018-07-30 Ilya Leoshkevich <iii@linux.ibm.com>
PR target/86547
* lra-constraints.c (spill_hard_reg_in_range): When selecting the
hard_regno, make sure no insn between `from` and `to` clobbers it.
Tom de Vries [Mon, 30 Jul 2018 08:17:26 +0000 (08:17 +0000)]
[libgomp, nvptx] Handle per-function max-threads-per-block in default dims
Currently parallel-loop-1.c fails at -O0 on a Quadro M1200, because one of the
kernel launch configurations exceeds the resources available in the device, due
to the default dimensions chosen by the runtime.
This patch fixes that by taking the per-function max_threads_per_block into
account when using the default dimensions.
[nvptx, offloading] Determine default workers at runtime
Currently, if the user doesn't specify the number of workers for an openacc
region, the compiler hardcodes it to a default value.
This patch removes this functionality, such that the libgomp runtime can decide
on a default value.
2018-07-30 Cesar Philippidis <cesar@codesourcery.com>
Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (PTX_GANG_DEFAULT): Rename to ...
(PTX_DEFAULT_RUNTIME_DIM): ... this.
(nvptx_goacc_validate_dims): Set default worker and gang dims to
PTX_DEFAULT_RUNTIME_DIM.
(nvptx_dim_limit): Ignore GOMP_DIM_WORKER.
Co-Authored-By: Tom de Vries <tdevries@suse.de>
From-SVN: r263060
David Malcolm [Sat, 28 Jul 2018 17:03:56 +0000 (17:03 +0000)]
C++: clean up cp_printer
This makes it easier to compare cp_printer with gcc_cxxdiag_char_table
in c-format.c.
No functional change intended.
gcc/cp/ChangeLog:
* error.c (cp_printer): In the leading comment, move "%H" and "%I"
into alphabetical order, and add missing "%G" and "%K". Within
the switch statement, move cases 'G', 'H', 'I' and 'K' so that the
cases are in alphabetical order.
Michael Meissner [Fri, 27 Jul 2018 22:13:36 +0000 (22:13 +0000)]
constraints.md (wG constraint): Delete, no longer used.
2018-07-27 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/constraints.md (wG constraint): Delete, no longer
used.
* config/rs6000/predicates.md (p9_fusion_reg_operand): Rename
predicate to reflect toc fusion has been deleted.
(toc_fusion_mem_raw): Delete, no longer used.
(toc_fusion_mem_wrapped): Likewise.
* config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Delete toc
fusion mask bit.
* config/rs6000/rs6000-protos.h (fusion_wrap_memory_address):
Delete, no longer used.
* config/rs6000/rs6000.c (struct rs6000_reg_addr): Delete fields
meant to be used for toc fusion.
(rs6000_debug_print_mode): Delete toc fusion debugging.
(rs6000_debug_reg_global): Likewise.
(rs6000_init_hard_regno_mode_ok): Delete setting up fields for toc
fusion and secondary reload support that were never used.
(rs6000_option_override_internal): Delete TOC fusion, that was only
partially defined, and it did not work unless you also used the
-mcmodel= switch.
(rs6000_legitimate_address_p): Delete TOC fusion support.
(rs6000_opt_masks): Likewise.
(fusion_wrap_memory_address): Delete function, no longer used.
(fusion_split_address); Delete TOC fusion support.
* config/rs6000/rs6000.h (TARGET_TOC_FUSION_INT): Delete, no
longer used with toc fusion being deleted.
(TARGET_TOC_FUSION_FP): Likewise.
* config/rs6000/rs6000.md (UNSPEC_FUSION_ADDIS): Delete TOC fusion
UNSPEC.
(toc fusion spliter): Delete TOC fusion support.
(toc_fusionload_<mode>): Likewise.
(toc_fusionload_di): Likewise.
(fusion_gpr_load_<mode>): Delete generator function, this insn no
longer needs to be named. Rename predicate to delete TOC fusion.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
(p9 fusion peephole2s): Rename predicate to delete TOC fusion.
Ian Lance Taylor [Fri, 27 Jul 2018 18:43:34 +0000 (18:43 +0000)]
libgo: prune sighandler frames in runtime.sigprof
When writing stack frames to the pprof CPU profile machinery, it is
very important to insure that the frames emitted do not contain any
frames corresponding to artifacts of the profiling process itself
(signal handlers, sigprof, etc). This patch changes runtime.sigprof to
strip out those frames from the raw stack generated by
"runtime.callers".
extend.texi (Basic PowerPC Built-in Functions Available on ISA 2.05): Replace __uint128_t with __uint128 and __int128_t with __int128 in built-in...
gcc/ChangeLog:
2018-07-27 Kelvin Nilsen <kelvin@gcc.gnu.org>
* doc/extend.texi (Basic PowerPC Built-in Functions Available on
ISA 2.05): Replace __uint128_t with __uint128 and __int128_t with
__int128 in built-in function prototypes.
(PowerPC AltiVec Built-in Functions on ISA 2.07): Likewise.
(PowerPC AltiVec Built-in Functions on ISA 3.0): Likewise.
Martin Sebor [Fri, 27 Jul 2018 17:06:44 +0000 (17:06 +0000)]
PR tree-optimization/86696 - ICE in handle_char_store at gcc/tree-ssa-strlen.c:3332
gcc/ChangeLog:
PR tree-optimization/86696
* tree-ssa-strlen.c (get_min_string_length): Handle all integer
types, including enums.
(handle_char_store): Be prepared for the above function to fail.
gcc/testsuite/ChangeLog:
PR tree-optimization/86696
* gcc.dg/pr86696.C: New test.
H.J. Lu [Fri, 27 Jul 2018 14:40:47 +0000 (14:40 +0000)]
i386: Remove _Unwind_Frames_Increment
CET kernel has been changed to place a restore token on shadow stack for
signal handler to enhance security. It is usually transparent to user
programs since kernel will pop the restore token when signal handler
returns. But when an exception is thrown from a signal handler, now
we need to remove _Unwind_Frames_Increment to pop the the restore token
from shadow stack. Otherwise, we get
FAIL: g++.dg/torture/pr85334.C -O0 execution test
FAIL: g++.dg/torture/pr85334.C -O1 execution test
FAIL: g++.dg/torture/pr85334.C -O2 execution test
FAIL: g++.dg/torture/pr85334.C -O3 -g execution test
FAIL: g++.dg/torture/pr85334.C -Os execution test
FAIL: g++.dg/torture/pr85334.C -O2 -flto -fno-use-linker-plugin -flto-partition=none execution test
Martin Sebor [Thu, 26 Jul 2018 16:45:43 +0000 (16:45 +0000)]
PR tree-optimization/86043 - strlen after memcpy partially overwriting a string not optimized
PR tree-optimization/86043 - strlen after memcpy partially overwriting a string not optimized
PR tree-optimization/86042 - missing strlen optimization after second strcpy
gcc/ChangeLog:
PR tree-optimization/86043
PR tree-optimization/86042
* tree-ssa-strlen.c (handle_builtin_memcpy): Handle strict overlaps.
(get_string_cst_length): Rename...
(get_min_string_length): ...to this. Add argument.
(handle_char_store): Extend to handle multi-character stores by
MEM_REF.
* tree.c (initializer_zerop): Use new argument. Handle MEM_REF.
* tree.h (initializer_zerop): Add argument.
gcc/testsuite/ChangeLog:
PR tree-optimization/86043
PR tree-optimization/86042
* gcc/testsuite/gcc.dg/attr-nonstring-2.c: Xfail test cases due to
pr86688.
* gcc.dg/strlenopt-44.c: New test.
Jakub Jelinek [Thu, 26 Jul 2018 16:12:58 +0000 (18:12 +0200)]
re PR middle-end/86660 (libgomp.c++/for-15.C ICEs with nvptx offloading)
PR testsuite/86660
* testsuite/libgomp.c++/for-15.C (results): Include it in
omp declare target region.
(main): Use map (always, tofrom: results) instead of
map (tofrom: results).
Jakub Jelinek [Thu, 26 Jul 2018 16:12:02 +0000 (18:12 +0200)]
re PR middle-end/86660 (libgomp.c++/for-15.C ICEs with nvptx offloading)
PR middle-end/86660
* omp-low.c (scan_sharing_clauses): Don't ignore map clauses for
declare target to variables if they have always,{to,from,tofrom} map
kinds.
H.J. Lu [Thu, 26 Jul 2018 14:48:55 +0000 (14:48 +0000)]
libsanitizer: Mark REAL(swapcontext) with indirect_return attribute on x86
Cherry-pick compiler-rt revision 337603:
When shadow stack from Intel CET is enabled, the first instruction of all
indirect branch targets must be a special instruction, ENDBR.
lib/asan/asan_interceptors.cc has
...
int res = REAL(swapcontext)(oucp, ucp);
...
REAL(swapcontext) is a function pointer to swapcontext in libc. Since
swapcontext may return via indirect branch on x86 when shadow stack is
enabled, as in this case,
int res = REAL(swapcontext)(oucp, ucp);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This function may be
returned via an indirect branch.
Here compiler must insert ENDBR after call, like
call *bar(%rip)
endbr64
I opened an LLVM bug:
https://bugs.llvm.org/show_bug.cgi?id=38207
to add the indirect_return attribute so that it can be used to inform
compiler to insert ENDBR after REAL(swapcontext) call. We mark
REAL(swapcontext) with the indirect_return attribute if it is available.
projects / thirdparty / gcc.git / log
