Merge tag 'reset-for-v6.17' of https://git.pengutronix.de/git/pza/linux into soc/drivers

Reset controller updates for v6.17

* Support reset controllers on Kendryte K230 and SOPHGO CV1800B.
* Add RZ/V2N USB2PHY reset controller bindings
* Use auxiliary device creation helpers in reset-mpfs.
* Convert nxp,lcp1850-rgu and snps,dw-reset binding docs to DT schema.
* Enable reset-brcmstb(-rescal) on BCM2712.
* Fix a typo in the T-HEAD TH1520 Kconfig option

* tag 'reset-for-v6.17' of https://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: Convert snps,dw-reset to DT schema
  reset: brcmstb: Enable reset drivers for ARCH_BCM2835
  reset: simple: add support for Sophgo CV1800B
  dt-bindings: reset: sophgo: Add CV1800B support
  reset: mpfs: use the auxiliary device creation
  dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC support
  dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml format
  reset: thead: Fix TH1520 typo
  reset: canaan: add reset driver for Kendryte K230
  dt-bindings: reset: add support for canaan,k230-rst

Link: https://lore.kernel.org/r/20250710152513.1346298-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'soc_fsl-6.17-1' of https://github.com/chleroy/linux into soc/drivers

FSL SOC Changes for 6.17:
- Use dev_fwnode() instead of of_fwnode_handle()
- Use new GPIO line value setter callbacks

* tag 'soc_fsl-6.17-1' of https://github.com/chleroy/linux:
  soc: Use dev_fwnode()
  soc: fsl: qe: use new GPIO line value setter callbacks

Link: https://lore.kernel.org/r/c947d537-cae5-44f0-abd8-0c558bac46d2@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-6.17-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/drivers

ASPEED SoC driver updates for 6.17

The ASPEED LPC snoop driver was recently the cause of some concern. In addition
to the initial fixes, the channel configuration paths are refactored to improve
robustness against errors.

* tag 'aspeed-6.17-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
  soc: aspeed: lpc-snoop: Lift channel config to const structs
  soc: aspeed: lpc-snoop: Consolidate channel initialisation
  soc: aspeed: lpc-snoop: Use dev_err_probe() where possible
  soc: aspeed: lpc-snoop: Switch to devm_clk_get_enabled()
  soc: aspeed: lpc-snoop: Rearrange channel paths
  soc: aspeed: lpc-snoop: Rename 'channel' to 'index' in channel paths
  soc: aspeed: lpc-snoop: Constrain parameters in channel paths
  soc: aspeed: lpc-snoop: Ensure model_data is valid
  soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
  soc: aspeed: lpc-snoop: Cleanup resources in stack-order

Link: https://lore.kernel.org/r/9123f151280e52c63dcb645cb07d4eee3462c067.camel@codeconstruct.com.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-drivers-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.17 (take two)

  - Sort Renesas Kconfig symbols.

* tag 'renesas-drivers-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Sort Renesas Kconfig configs

Link: https://lore.kernel.org/r/cover.1752090398.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm SCMI updates for v6.17

1. A fix is introduced to correct turbo frequency marking for 64-bit
   devices with sustained frequencies over 4GHz, ensuring accurate turbo
   frequency identification.

2. Debug capabilities are being improved by introducing in-flight transfer
   tracking using debug counters, which help diagnose transfer congestion
   and behavior. Additional tracepoints are added to log in-flight counts
   at transfer begin and end, offering better runtime insight. The debug
   counters now support decrement operations using a newly added
   scmi_dec_count helper, making counter tracking symmetric and more robust.

3. A race condition in suspend-resume logic is being resolved by ensuring
   SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
   reliability under certain conditions. New suspend and resume operations
   are added to the scmi_bus_type to enable finer power management control
   for SCMI-based devices.

4. Finally enhancements are also made to avoid registering notifiers for
   events that a platform does not support, reducing unnecessary overhead
   by checking for unsupported event types during protocolinitialization.

* tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS
  firmware: arm_scmi: Avoid notifier registration for unsupported events
  firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
  firmware: arm_scmi: Add power management operations to SCMI bus
  include: trace:  Add tracepoint support for inflight xfer count
  firmware: arm_scmi: Track number of inflight SCMI transfers
  firmware: arm_scmi: Add support for debug counter decrement
  firmware: arm_scmi: Fix up turbo frequencies selection

Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'smccc-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

firmware: smccc: Update for v6.17

Just a single update extending arm_smccc_hypervisor_has_uuid() to
support both SMC and HVC conduits, enabling UUID retrieval when Linux
runs as the root partition under Microsoft Hypervisor (MSHV), where
SMC is used. It leverages arm_smccc_1_1_invoke() to dynamically select
the appropriate conduit, enhancing compatibility beyond just HVC.

* tag 'smccc-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: smccc: Support both smc and hvc conduits for getting hyp UUID

Link: https://lore.kernel.org/r/20250709122615.1171419-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS

The old SET_SYSTEM_SLEEP_PM_OPS() macro leads to a warning about an
unused function:

  |  drivers/firmware/arm_scmi/scmi_power_control.c:363:12: error:
  |  'scmi_system_power_resume' defined but not used [-Werror=unused-function]
  |         static int scmi_system_power_resume(struct device *dev)

The proper way to do this these days is to use SYSTEM_SLEEP_PM_OPS()
and pm_sleep_ptr().

Fixes: 9a0658d3991e ("firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250709070107.1388512-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Avoid notifier registration for unsupported events

Some platforms may be configured to not support notification events from
certain sources. This scenario is already handled gracefully by avoiding
any attempt to send a notification enable request for those sources, as
such requests would inevitably fail.

However, in a more extreme case, a platform might not support even a
single source for a given event type. In this situation, allowing
notifier registration is meaningless. Attempting to register a notifier
would serve no purpose and only result in unnecessary overhead.

To address this, we now detect such conditions during the protocol
initialization. When identified, we flag the unsupported event types and
reject any subsequent notifier registration attempts for them with
-ENOTSUPP. This early rejection avoids redundant processing and
simplifies runtime logic.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250707144220.485365-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

soc: renesas: Sort Renesas Kconfig configs

Renesas Kconfig is using "SoC serial number" for CONFIG symbol, but is
using "SoC chip name" for menu description. Because of it, it looks
random order when we run "make menuconfig".

commit 6d5aded8d57fc ("soc: renesas: Sort driver description title")
sorted Renesas Kconfig by menu description title order, but it makes
confusable to add new config.

Let's unify "ARMxx Platform support for ${CHIP_NUMBER} (${CHIP_NAME}),
and sort it again.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/877c0xhk3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

soc: Use dev_fwnode()

irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().

So use the dev_fwnode() helper.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/linuxppc-dev/20250611104348.192092-19-jirislaby@kernel.org/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

soc: fsl: qe: use new GPIO line value setter callbacks

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-soc-v1-1-1a0c36c9deed@linaro.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

soc: aspeed: lpc-snoop: Lift channel config to const structs

The shifts and masks for each channel are defined by hardware and
are not something that changes at runtime. Accordingly, describe the
information in an array of const structs and associate elements with
each channel instance, removing the need for the switch and handling of
its default case.

Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-10-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Consolidate channel initialisation

Previously, channel initialisation was a bit perilous with respect to
resource cleanup in error paths. While the implementation had issues,
it at least made an effort to eliminate some of its problems by first
testing whether any channels were enabled, and bailing out if not.

Having improved the robustness of resource handling in probe() we can
now rearrange the initial channel test to be located with the subsequent
test, and rework the unrolled conditional logic to use a loop for an
improvement in readability.

Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-9-3cdd59c934d3@codeconstruct.com.au
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Use dev_err_probe() where possible

Exploit that it returns the provided error to eliminate some lines, and
return the actual error involved rather than -ENODEV.

Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-8-3cdd59c934d3@codeconstruct.com.au
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Switch to devm_clk_get_enabled()

Simplify clock handling as done in other drivers.

Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-7-3cdd59c934d3@codeconstruct.com.au
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Rearrange channel paths

Order assignments such that tests for conditions not involving resource
acquisition are ordered before those testing acquired resources, and
order managed resource acquisition before unmanaged where possible. This
way we minimise the amount of manual cleanup required.

In the process, improve readability of the code by introducing a channel
pointer that takes the place of the repeated object lookups.

Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-6-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Rename 'channel' to 'index' in channel paths

We'll introduce another 'channel' variable shortly

Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-5-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Constrain parameters in channel paths

Ensure pointers and the channel index are valid before use.

Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-4-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Ensure model_data is valid

of_device_get_match_data() can return NULL, though shouldn't in current
circumstances. Regardless, initialise model_data closer to use so it's
clear we need to test for validity prior to dereferencing.

Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-3-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume

Fix a race condition where a second suspend notification from another
SCMI agent wakes the system before SCMI_SYSPOWER_IDLE is set, leading
to ignored suspend requests. This is due to interrupts triggering early
execution of `scmi_userspace_notifier()` before the SCMI state is updated.

To resolve this, set SCMI_SYSPOWER_IDLE earlier in the device resume
path, prior to `thaw_processes()`. This ensures the SCMI state is
correct when the notifier runs, allowing the system to suspend again
as expected.

On some platforms using SCMI, SCP cannot distinguish between CPU idle
and suspend since both result in cluster power-off. By explicitly setting
the idle state early, the Linux SCMI agent can correctly re-suspend in
response to external notifications.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-2-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add power management operations to SCMI bus

Introduce suspend and resume power management callbacks for `scmi_bus_type`,
modeled after `platform_pm_ops`. This enables SCMI devices on the bus to
implement their own suspend and resume behavior, allowing for more
fine-grained power control at the device level.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-1-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Merge tag 'renesas-drivers-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.17

  - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
    (R9A09G087) SoCs,
  - Convert the RZ/V2M External Power Sequence Controller (PWC) driver
    to the new GPIO line value setter callbacks.

* tag 'renesas-drivers-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: pwc-rzv2m: Use new GPIO line value setter callbacks
  soc: renesas: Add RZ/N2H (R9A09G087) config option
  soc: renesas: Add RZ/T2H (R9A09G077) config option

Link: https://lore.kernel.org/r/cover.1751026661.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

include: trace:  Add tracepoint support for inflight xfer count

Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.

Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.

This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Track number of inflight SCMI transfers

Add a new debug counter, `XFERS_INFLIGHT`, to track the number of
currently active in-flight SCMI message transfers. This helps in
understanding system behavior and diagnosing potential issues with
pending or stuck messages.

The counter is incremented when a transfer is registered as in-flight,
and decremented when it completes and is released.

It is automatically added to debugfs for visibility through SCMI debugfs.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-3-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add support for debug counter decrement

Introduce a new `scmi_dec_count` helper to complement the existing
`scmi_inc_count`, allowing controlled decrement of SCMI debug counters.

This provides symmetry in debug counter management and enables
accurate tracking of counters that may both increase and decrease,
such as those used for in-flight message tracking.

Only active when CONFIG_ARM_SCMI_DEBUG_COUNTERS is enabled.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-2-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

dt-bindings: reset: Convert snps,dw-reset to DT schema

Convert the Synopsys Designware Reset Controller binding to schema. It
is a straight forward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250702222609.2760718-1-robh@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled

Mitigate e.g. the following:

    # echo 1e789080.lpc-snoop > /sys/bus/platform/drivers/aspeed-lpc-snoop/unbind
    ...
    [  120.363594] Unable to handle kernel NULL pointer dereference at virtual address 00000004 when write
    [  120.373866] [00000004] *pgd=00000000
    [  120.377910] Internal error: Oops: 805 [#1] SMP ARM
    [  120.383306] CPU: 1 UID: 0 PID: 315 Comm: sh Not tainted 6.15.0-rc1-00009-g926217bc7d7d-dirty #20 NONE
    ...
    [  120.679543] Call trace:
    [  120.679559]  misc_deregister from aspeed_lpc_snoop_remove+0x84/0xac
    [  120.692462]  aspeed_lpc_snoop_remove from platform_remove+0x28/0x38
    [  120.700996]  platform_remove from device_release_driver_internal+0x188/0x200
    ...

Fixes: 9f4f9ae81d0a ("drivers/misc: add Aspeed LPC snoop driver")
Cc: stable@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-2-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

soc: aspeed: lpc-snoop: Cleanup resources in stack-order

Free the kfifo after unregistering the miscdev in
aspeed_lpc_disable_snoop() as the kfifo is initialised before the
miscdev in aspeed_lpc_enable_snoop().

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Cc: stable@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-1-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

reset: brcmstb: Enable reset drivers for ARCH_BCM2835

The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

reset: simple: add support for Sophgo CV1800B

Reuse reset-simple driver for the Sophgo CV1800B reset generator.

Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-3-inochiama@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

dt-bindings: reset: sophgo: Add CV1800B support

Add bindings for the reset generator on the SOPHGO CV1800B
RISC-V SoC.

Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250617070144.1149926-2-inochiama@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

reset: mpfs: use the auxiliary device creation

The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.

Use it and remove some boilerplate code.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250611-rst-mpfs-aux-v1-1-c86534b473c3@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC support

Document support for the USB2PHY reset controller found on the Renesas
RZ/V2N (R9A09G056) SoC. The reset controller IP is functionally identical
to that on the RZ/V2H(P) SoC, so no driver changes are needed. The existing
`renesas,r9a09g057-usb2phy-reset` compatible will be used as a fallback
for the RZ/V2N SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250528133031.167647-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml format

Convert nxp,lpc1850-rgu.txt to yaml format.

Additional changes:
- remove label in example.
- remove reset consumer in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602144046.943982-1-Frank.Li@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

reset: thead: Fix TH1520 typo

Fix trivial typo in the Kconfig entry for RESET_TH1520.

Fixes: 4a65326311ab ("reset: thead: Add TH1520 reset controller driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250601181000.166088-1-drew@pdp7.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

reset: canaan: add reset driver for Kendryte K230

Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.

Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

dt-bindings: reset: add support for canaan,k230-rst

Introduces a reset controller driver for the Kendryte K230 SoC,
resposible for managing the reset functionality of the CPUs and
various sub-modules.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

firmware: arm_scmi: Fix up turbo frequencies selection

Sustained frequency when greater than or equal to 4Ghz on 64-bit devices
currently result in marking all frequencies as turbo. Address the turbo
frequency selection bug by fixing the truncation.

Fixes: a897575e79d7 ("firmware: arm_scmi: Add support for marking certain frequencies as turbo")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Message-Id: <20250514214719.203607-1-quic_sibis@quicinc.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Linux 6.16-rc3

Merge tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - subsystem: convert drivers to use recent callbacks of struct
   i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
   time for rc2

 - tegra: fix YAML conversion of device tree bindings

 - k1: re-add a check which got lost during upstreaming

* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: k1: check for transfer error
  i2c: use inclusive callbacks in struct i2c_algorithm
  dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties

Merge tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Make sure the array tracking which kernel text positions need to be
   alternatives-patched doesn't get mishandled by out-of-order
   modifications, leading to it overflowing and causing page faults when
   patching

 - Avoid an infinite loop when early code does a ranged TLB invalidation
   before the broadcast TLB invalidation count of how many pages it can
   flush, has been read from CPUID

 - Fix a CONFIG_MODULES typo

 - Disable broadcast TLB invalidation when PTI is enabled to avoid an
   overflow of the bitmap tracking dynamic ASIDs which need to be
   flushed when the kernel switches between the user and kernel address
   space

 - Handle the case of a CPU going offline and thus reporting zeroes when
   reading top-level events in the resctrl code

* tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Fix int3 handling failure from broken text_poke array
  x86/mm: Fix early boot use of INVPLGB
  x86/its: Fix an ifdef typo in its_alloc()
  x86/mm: Disable INVLPGB when PTI is enabled
  x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem

Merge tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Fix missing prototypes warnings

 - Properly initialize work context when allocating it

 - Remove a method tracking when managed interrupts are suspended during
   hotplug, in favor of the code using a IRQ disable depth tracking now,
   and have interrupts get properly enabled again on restore

 - Make sure multiple CPUs getting hotplugged don't cause wrong tracking
   of the managed IRQ disable depth

* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ath79-misc: Fix missing prototypes warnings
  genirq/irq_sim: Initialize work context pointers properly
  genirq/cpuhotplug: Restore affinity even for suspended IRQ
  genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug

Merge tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Avoid a crash on a heterogeneous machine where not all cores support
   the same hw events features

 - Avoid a deadlock when throttling events

 - Document the perf event states more

 - Make sure a number of perf paths switching off or rescheduling events
   call perf_cgroup_event_disable()

 - Make sure perf does task sampling before its userspace mapping is
   torn down, and not after

* tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix crash in icl_update_topdown_event()
  perf: Fix the throttle error of some clock events
  perf: Add comment to enum perf_event_state
  perf/core: Fix WARN in perf_cgroup_switch()
  perf: Fix dangling cgroup pointer in cpuctx
  perf: Fix cgroup state vs ERROR
  perf: Fix sample vs do_exit()

Merge tag 'locking_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:

 - Make sure the switch to the global hash is requested always under a
   lock so that two threads requesting that simultaneously cannot get to
   inconsistent state

 - Reject negative NUMA nodes earlier in the futex NUMA interface
   handling code

 - Selftests fixes

* tag 'locking_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Verify under the lock if hash can be replaced
  futex: Handle invalid node numbers supplied by user
  selftests/futex: Set the home_node in futex_numa_mpol
  selftests/futex: getopt() requires int as return value.

Merge tag 'edac_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

 - amd64: Correct the number of memory controllers on some AMD Zen
   clients

 - igen6: Handle firmware-disabled memory controllers properly

* tag 'edac_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Fix NULL pointer dereference
  EDAC/amd64: Correct number of UMCs for family 19h models 70h-7fh

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
     missing synchronisation

   - A small fix for the irqbypass hook fixes, tightening the check and
     ensuring that we only deal with MSI for both the old and the new
     route entry

   - Rework the way the shadow LRs are addressed in a nesting
     configuration, plugging an embarrassing bug as well as simplifying
     the whole process

   - Add yet another fix for the dreaded arch_timer_edge_cases selftest

  RISC-V:

   - Fix the size parameter check in SBI SFENCE calls

   - Don't treat SBI HFENCE calls as NOPs

  x86 TDX:

   - Complete API for handling complex TDVMCALLs in userspace.

     This was delayed because the spec lacked a way for userspace to
     deny supporting these calls; the new exit code is now approved"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: TDX: Exit to userspace for GetTdVmCallInfo
  KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
  KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs
  KVM: arm64: VHE: Centralize ISBs when returning to host
  KVM: arm64: Remove cpacr_clear_set()
  KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()
  KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()
  KVM: arm64: Reorganise CPTR trap manipulation
  KVM: arm64: VHE: Synchronize CPTR trap deactivation
  KVM: arm64: VHE: Synchronize restore of host debug registers
  KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_cases
  KVM: arm64: Explicitly treat routing entry type changes as changes
  KVM: arm64: nv: Fix tracking of shadow list registers
  RISC-V: KVM: Don't treat SBI HFENCE calls as NOPs
  RISC-V: KVM: Fix the size parameter check in SBI SFENCE calls

Merge tag 'v6.16-rc2-smb3-client-fixes-v2' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

 - Multichannel channel allocation fix for Kerberos mounts

 - Two reconnect fixes

 - Fix netfs_writepages crash with smbdirect/RDMA

 - Directory caching fix

 - Three minor cleanup fixes

 - Log error when close cached dirs fails

* tag 'v6.16-rc2-smb3-client-fixes-v2' of git://git.samba.org/sfrench/cifs-2.6:
  smb: minor fix to use SMB2_NTLMV2_SESSKEY_SIZE for auth_key size
  smb: minor fix to use sizeof to initialize flags_string buffer
  smb: Use loff_t for directory position in cached_dirents
  smb: Log an error when close_all_cached_dirs fails
  cifs: Fix prepare_write to negotiate wsize if needed
  smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma()
  smb: client: fix first command failure during re-negotiation
  cifs: Remove duplicate fattr->cf_dtype assignment from wsl_to_fattr() function
  smb: fix secondary channel creation issue with kerberos by populating hostname when adding channels

i2c: k1: check for transfer error

If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).

The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function.  It currently
does not save the value returned by spacemit_i2c_xfer_msg().

The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.

When this code was out for review, the return value *was* checked
in early versions.  But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().

Simply assigning the value returned to "ret" fixes the problem.

Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Merge tag 'nfsd-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:

 - Two fixes for commits in the nfsd-6.16 merge

 - One fix for the recently-added NFSD netlink facility

 - One fix for a remote SunRPC crasher

* tag 'nfsd-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  sunrpc: handle SVC_GARBAGE during svc auth processing as auth error
  nfsd: use threads array as-is in netlink interface
  SUNRPC: Cleanup/fix initial rq_pages allocation
  NFSD: Avoid corruption of a referring call list

Merge tag 'erofs-for-6.16-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

 - Use the mounter’s credentials for file-backed mounts to resolve
   Android SELinux permission issues

 - Remove the unused trace event `erofs_destroy_inode`

 - Error out on crafted out-of-file-range encoded extents

 - Remove an incorrect check for encoded extents

* tag 'erofs-for-6.16-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: remove a superfluous check for encoded extents
  erofs: refuse crafted out-of-file-range encoded extents
  erofs: remove unused trace event erofs_destroy_inode
  erofs: impersonate the opener's credentials when accessing backing file

smb: minor fix to use SMB2_NTLMV2_SESSKEY_SIZE for auth_key size

Replaced hardcoded value 16 with SMB2_NTLMV2_SESSKEY_SIZE
in the auth_key definition and memcpy call.

Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: minor fix to use sizeof to initialize flags_string buffer

Replaced hardcoded length with sizeof(flags_string).

Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: Use loff_t for directory position in cached_dirents

Change the pos field in struct cached_dirents from int to loff_t
to support large directory offsets. This avoids overflow and
matches kernel conventions for directory positions.

Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: Log an error when close_all_cached_dirs fails

Under low-memory conditions, close_all_cached_dirs() can't move the
dentries to a separate list to dput() them once the locks are dropped.
This will result in a "Dentry still in use" error, so add an error
message that makes it clear this is what happened:

[  495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries
[  495.281595] ------------[ cut here ]------------
[  495.281887] BUG: Dentry ffff888115531138{i=78,n=/}  still in use (2) [unmount of cifs cifs]
[  495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0

Also, bail out of looping through all tcons as soon as a single
allocation fails, since we're already in trouble, and kmalloc() attempts
for subseqeuent tcons are likely to fail just like the first one did.

Signed-off-by: Paul Aurich <paul@darkrain42.org>
Acked-by: Bharath SM <bharathsm@microsoft.com>
Suggested-by: Ruben Devos <rdevos@oxya.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix prepare_write to negotiate wsize if needed

Fix cifs_prepare_write() to negotiate the wsize if it is unset.

Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma()

This fixes the following problem:

[  749.901015] [   T8673] run fstests cifs/001 at 2025-06-17 09:40:30
[  750.346409] [   T9870] ==================================================================
[  750.346814] [   T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs]
[  750.347330] [   T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870
[  750.347705] [   T9870]
[  750.348077] [   T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary)
[  750.348082] [   T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  750.348085] [   T9870] Call Trace:
[  750.348086] [   T9870]  <TASK>
[  750.348088] [   T9870]  dump_stack_lvl+0x76/0xa0
[  750.348106] [   T9870]  print_report+0xd1/0x640
[  750.348116] [   T9870]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  750.348120] [   T9870]  ? kasan_complete_mode_report_info+0x26/0x210
[  750.348124] [   T9870]  kasan_report+0xe7/0x130
[  750.348128] [   T9870]  ? smb_set_sge+0x2cc/0x3b0 [cifs]
[  750.348262] [   T9870]  ? smb_set_sge+0x2cc/0x3b0 [cifs]
[  750.348377] [   T9870]  __asan_report_store8_noabort+0x17/0x30
[  750.348381] [   T9870]  smb_set_sge+0x2cc/0x3b0 [cifs]
[  750.348496] [   T9870]  smbd_post_send_iter+0x1990/0x3070 [cifs]
[  750.348625] [   T9870]  ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs]
[  750.348741] [   T9870]  ? update_stack_state+0x2a0/0x670
[  750.348749] [   T9870]  ? cifs_flush+0x153/0x320 [cifs]
[  750.348870] [   T9870]  ? cifs_flush+0x153/0x320 [cifs]
[  750.348990] [   T9870]  ? update_stack_state+0x2a0/0x670
[  750.348995] [   T9870]  smbd_send+0x58c/0x9c0 [cifs]
[  750.349117] [   T9870]  ? __pfx_smbd_send+0x10/0x10 [cifs]
[  750.349231] [   T9870]  ? unwind_get_return_address+0x65/0xb0
[  750.349235] [   T9870]  ? __pfx_stack_trace_consume_entry+0x10/0x10
[  750.349242] [   T9870]  ? arch_stack_walk+0xa7/0x100
[  750.349250] [   T9870]  ? stack_trace_save+0x92/0xd0
[  750.349254] [   T9870]  __smb_send_rqst+0x931/0xec0 [cifs]
[  750.349374] [   T9870]  ? kernel_text_address+0x173/0x190
[  750.349379] [   T9870]  ? kasan_save_stack+0x39/0x70
[  750.349382] [   T9870]  ? kasan_save_track+0x18/0x70
[  750.349385] [   T9870]  ? __kasan_slab_alloc+0x9d/0xa0
[  750.349389] [   T9870]  ? __pfx___smb_send_rqst+0x10/0x10 [cifs]
[  750.349508] [   T9870]  ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs]
[  750.349626] [   T9870]  ? cifs_call_async+0x277/0xb00 [cifs]
[  750.349746] [   T9870]  ? cifs_issue_write+0x256/0x610 [cifs]
[  750.349867] [   T9870]  ? netfs_do_issue_write+0xc2/0x340 [netfs]
[  750.349900] [   T9870]  ? netfs_advance_write+0x45b/0x1270 [netfs]
[  750.349929] [   T9870]  ? netfs_write_folio+0xd6c/0x1be0 [netfs]
[  750.349958] [   T9870]  ? netfs_writepages+0x2e9/0xa80 [netfs]
[  750.349987] [   T9870]  ? do_writepages+0x21f/0x590
[  750.349993] [   T9870]  ? filemap_fdatawrite_wbc+0xe1/0x140
[  750.349997] [   T9870]  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.350002] [   T9870]  smb_send_rqst+0x22e/0x2f0 [cifs]
[  750.350131] [   T9870]  ? __pfx_smb_send_rqst+0x10/0x10 [cifs]
[  750.350255] [   T9870]  ? local_clock_noinstr+0xe/0xd0
[  750.350261] [   T9870]  ? kasan_save_alloc_info+0x37/0x60
[  750.350268] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.350271] [   T9870]  ? _raw_spin_lock+0x81/0xf0
[  750.350275] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.350278] [   T9870]  ? smb2_setup_async_request+0x293/0x580 [cifs]
[  750.350398] [   T9870]  cifs_call_async+0x477/0xb00 [cifs]
[  750.350518] [   T9870]  ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[  750.350636] [   T9870]  ? __pfx_cifs_call_async+0x10/0x10 [cifs]
[  750.350756] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.350760] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.350763] [   T9870]  ? __smb2_plain_req_init+0x933/0x1090 [cifs]
[  750.350891] [   T9870]  smb2_async_writev+0x15ff/0x2460 [cifs]
[  750.351008] [   T9870]  ? sched_clock_noinstr+0x9/0x10
[  750.351012] [   T9870]  ? local_clock_noinstr+0xe/0xd0
[  750.351018] [   T9870]  ? __pfx_smb2_async_writev+0x10/0x10 [cifs]
[  750.351144] [   T9870]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  750.351150] [   T9870]  ? _raw_spin_unlock+0xe/0x40
[  750.351154] [   T9870]  ? cifs_pick_channel+0x242/0x370 [cifs]
[  750.351275] [   T9870]  cifs_issue_write+0x256/0x610 [cifs]
[  750.351554] [   T9870]  ? cifs_issue_write+0x256/0x610 [cifs]
[  750.351677] [   T9870]  netfs_do_issue_write+0xc2/0x340 [netfs]
[  750.351710] [   T9870]  netfs_advance_write+0x45b/0x1270 [netfs]
[  750.351740] [   T9870]  ? rolling_buffer_append+0x12d/0x440 [netfs]
[  750.351769] [   T9870]  netfs_write_folio+0xd6c/0x1be0 [netfs]
[  750.351798] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.351804] [   T9870]  netfs_writepages+0x2e9/0xa80 [netfs]
[  750.351835] [   T9870]  ? __pfx_netfs_writepages+0x10/0x10 [netfs]
[  750.351864] [   T9870]  ? exit_files+0xab/0xe0
[  750.351867] [   T9870]  ? do_exit+0x148f/0x2980
[  750.351871] [   T9870]  ? do_group_exit+0xb5/0x250
[  750.351874] [   T9870]  ? arch_do_signal_or_restart+0x92/0x630
[  750.351879] [   T9870]  ? exit_to_user_mode_loop+0x98/0x170
[  750.351882] [   T9870]  ? do_syscall_64+0x2cf/0xd80
[  750.351886] [   T9870]  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.351890] [   T9870]  do_writepages+0x21f/0x590
[  750.351894] [   T9870]  ? __pfx_do_writepages+0x10/0x10
[  750.351897] [   T9870]  filemap_fdatawrite_wbc+0xe1/0x140
[  750.351901] [   T9870]  __filemap_fdatawrite_range+0xba/0x100
[  750.351904] [   T9870]  ? __pfx___filemap_fdatawrite_range+0x10/0x10
[  750.351912] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.351916] [   T9870]  filemap_write_and_wait_range+0x7d/0xf0
[  750.351920] [   T9870]  cifs_flush+0x153/0x320 [cifs]
[  750.352042] [   T9870]  filp_flush+0x107/0x1a0
[  750.352046] [   T9870]  filp_close+0x14/0x30
[  750.352049] [   T9870]  put_files_struct.part.0+0x126/0x2a0
[  750.352053] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.352058] [   T9870]  exit_files+0xab/0xe0
[  750.352061] [   T9870]  do_exit+0x148f/0x2980
[  750.352065] [   T9870]  ? __pfx_do_exit+0x10/0x10
[  750.352069] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.352072] [   T9870]  ? _raw_spin_lock_irq+0x8a/0xf0
[  750.352076] [   T9870]  do_group_exit+0xb5/0x250
[  750.352080] [   T9870]  get_signal+0x22d3/0x22e0
[  750.352086] [   T9870]  ? __pfx_get_signal+0x10/0x10
[  750.352089] [   T9870]  ? fpregs_assert_state_consistent+0x68/0x100
[  750.352101] [   T9870]  ? folio_add_lru+0xda/0x120
[  750.352105] [   T9870]  arch_do_signal_or_restart+0x92/0x630
[  750.352109] [   T9870]  ? __pfx_arch_do_signal_or_restart+0x10/0x10
[  750.352115] [   T9870]  exit_to_user_mode_loop+0x98/0x170
[  750.352118] [   T9870]  do_syscall_64+0x2cf/0xd80
[  750.352123] [   T9870]  ? __kasan_check_read+0x11/0x20
[  750.352126] [   T9870]  ? count_memcg_events+0x1b4/0x420
[  750.352132] [   T9870]  ? handle_mm_fault+0x148/0x690
[  750.352136] [   T9870]  ? _raw_spin_lock_irq+0x8a/0xf0
[  750.352140] [   T9870]  ? __kasan_check_read+0x11/0x20
[  750.352143] [   T9870]  ? fpregs_assert_state_consistent+0x68/0x100
[  750.352146] [   T9870]  ? irqentry_exit_to_user_mode+0x2e/0x250
[  750.352151] [   T9870]  ? irqentry_exit+0x43/0x50
[  750.352154] [   T9870]  ? exc_page_fault+0x75/0xe0
[  750.352160] [   T9870]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.352163] [   T9870] RIP: 0033:0x7858c94ab6e2
[  750.352167] [   T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8.
[  750.352175] [   T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022
[  750.352179] [   T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2
[  750.352182] [   T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[  750.352184] [   T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000
[  750.352185] [   T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0
[  750.352187] [   T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230
[  750.352191] [   T9870]  </TASK>
[  750.352195] [   T9870]
[  750.395206] [   T9870] Allocated by task 9870 on cpu 0 at 750.346406s:
[  750.395523] [   T9870]  kasan_save_stack+0x39/0x70
[  750.395532] [   T9870]  kasan_save_track+0x18/0x70
[  750.395536] [   T9870]  kasan_save_alloc_info+0x37/0x60
[  750.395539] [   T9870]  __kasan_slab_alloc+0x9d/0xa0
[  750.395543] [   T9870]  kmem_cache_alloc_noprof+0x13c/0x3f0
[  750.395548] [   T9870]  mempool_alloc_slab+0x15/0x20
[  750.395553] [   T9870]  mempool_alloc_noprof+0x135/0x340
[  750.395557] [   T9870]  smbd_post_send_iter+0x63e/0x3070 [cifs]
[  750.395694] [   T9870]  smbd_send+0x58c/0x9c0 [cifs]
[  750.395819] [   T9870]  __smb_send_rqst+0x931/0xec0 [cifs]
[  750.395950] [   T9870]  smb_send_rqst+0x22e/0x2f0 [cifs]
[  750.396081] [   T9870]  cifs_call_async+0x477/0xb00 [cifs]
[  750.396232] [   T9870]  smb2_async_writev+0x15ff/0x2460 [cifs]
[  750.396359] [   T9870]  cifs_issue_write+0x256/0x610 [cifs]
[  750.396492] [   T9870]  netfs_do_issue_write+0xc2/0x340 [netfs]
[  750.396544] [   T9870]  netfs_advance_write+0x45b/0x1270 [netfs]
[  750.396576] [   T9870]  netfs_write_folio+0xd6c/0x1be0 [netfs]
[  750.396608] [   T9870]  netfs_writepages+0x2e9/0xa80 [netfs]
[  750.396639] [   T9870]  do_writepages+0x21f/0x590
[  750.396643] [   T9870]  filemap_fdatawrite_wbc+0xe1/0x140
[  750.396647] [   T9870]  __filemap_fdatawrite_range+0xba/0x100
[  750.396651] [   T9870]  filemap_write_and_wait_range+0x7d/0xf0
[  750.396656] [   T9870]  cifs_flush+0x153/0x320 [cifs]
[  750.396787] [   T9870]  filp_flush+0x107/0x1a0
[  750.396791] [   T9870]  filp_close+0x14/0x30
[  750.396795] [   T9870]  put_files_struct.part.0+0x126/0x2a0
[  750.396800] [   T9870]  exit_files+0xab/0xe0
[  750.396803] [   T9870]  do_exit+0x148f/0x2980
[  750.396808] [   T9870]  do_group_exit+0xb5/0x250
[  750.396813] [   T9870]  get_signal+0x22d3/0x22e0
[  750.396817] [   T9870]  arch_do_signal_or_restart+0x92/0x630
[  750.396822] [   T9870]  exit_to_user_mode_loop+0x98/0x170
[  750.396827] [   T9870]  do_syscall_64+0x2cf/0xd80
[  750.396832] [   T9870]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.396836] [   T9870]
[  750.397150] [   T9870] The buggy address belongs to the object at ffff888011082800
                           which belongs to the cache smbd_request_0000000008f3bd7b of size 144
[  750.397798] [   T9870] The buggy address is located 0 bytes to the right of
                           allocated 144-byte region [ffff888011082800, ffff888011082890)
[  750.398469] [   T9870]
[  750.398800] [   T9870] The buggy address belongs to the physical page:
[  750.399141] [   T9870] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11082
[  750.399148] [   T9870] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[  750.399155] [   T9870] page_type: f5(slab)
[  750.399161] [   T9870] raw: 000fffffc0000000 ffff888022d65640 dead000000000122 0000000000000000
[  750.399165] [   T9870] raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
[  750.399169] [   T9870] page dumped because: kasan: bad access detected
[  750.399172] [   T9870]
[  750.399505] [   T9870] Memory state around the buggy address:
[  750.399863] [   T9870]  ffff888011082780: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  750.400247] [   T9870]  ffff888011082800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  750.400618] [   T9870] >ffff888011082880: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  750.400982] [   T9870]                          ^
[  750.401370] [   T9870]  ffff888011082900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  750.401774] [   T9870]  ffff888011082980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  750.402171] [   T9870] ==================================================================
[  750.402696] [   T9870] Disabling lock debugging due to kernel taint
[  750.403202] [   T9870] BUG: unable to handle page fault for address: ffff8880110a2000
[  750.403797] [   T9870] #PF: supervisor write access in kernel mode
[  750.404204] [   T9870] #PF: error_code(0x0003) - permissions violation
[  750.404581] [   T9870] PGD 5ce01067 P4D 5ce01067 PUD 5ce02067 PMD 78aa063 PTE 80000000110a2021
[  750.404969] [   T9870] Oops: Oops: 0003 [#1] SMP KASAN PTI
[  750.405394] [   T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Tainted: G    B               6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary)
[  750.406510] [   T9870] Tainted: [B]=BAD_PAGE
[  750.406967] [   T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  750.407440] [   T9870] RIP: 0010:smb_set_sge+0x15c/0x3b0 [cifs]
[  750.408065] [   T9870] Code: 48 83 f8 ff 0f 84 b0 00 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 80 3c 11 00 0f 85 69 01 00 00 49 8d 7c 24 08 <49> 89 04 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f
[  750.409283] [   T9870] RSP: 0018:ffffc90005e2e758 EFLAGS: 00010246
[  750.409803] [   T9870] RAX: ffff888036c53400 RBX: ffffc90005e2e878 RCX: 1ffff11002214400
[  750.410323] [   T9870] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff8880110a2008
[  750.411217] [   T9870] RBP: ffffc90005e2e798 R08: 0000000000000001 R09: 0000000000000400
[  750.411770] [   T9870] R10: ffff888011082800 R11: 0000000000000000 R12: ffff8880110a2000
[  750.412325] [   T9870] R13: 0000000000000000 R14: ffffc90005e2e888 R15: ffff88801a4b6000
[  750.412901] [   T9870] FS:  0000000000000000(0000) GS:ffff88812bc68000(0000) knlGS:0000000000000000
[  750.413477] [   T9870] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  750.414077] [   T9870] CR2: ffff8880110a2000 CR3: 000000005b0a6005 CR4: 00000000000726f0
[  750.414654] [   T9870] Call Trace:
[  750.415211] [   T9870]  <TASK>
[  750.415748] [   T9870]  smbd_post_send_iter+0x1990/0x3070 [cifs]
[  750.416449] [   T9870]  ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs]
[  750.417128] [   T9870]  ? update_stack_state+0x2a0/0x670
[  750.417685] [   T9870]  ? cifs_flush+0x153/0x320 [cifs]
[  750.418380] [   T9870]  ? cifs_flush+0x153/0x320 [cifs]
[  750.419055] [   T9870]  ? update_stack_state+0x2a0/0x670
[  750.419624] [   T9870]  smbd_send+0x58c/0x9c0 [cifs]
[  750.420297] [   T9870]  ? __pfx_smbd_send+0x10/0x10 [cifs]
[  750.420936] [   T9870]  ? unwind_get_return_address+0x65/0xb0
[  750.421456] [   T9870]  ? __pfx_stack_trace_consume_entry+0x10/0x10
[  750.421954] [   T9870]  ? arch_stack_walk+0xa7/0x100
[  750.422460] [   T9870]  ? stack_trace_save+0x92/0xd0
[  750.422948] [   T9870]  __smb_send_rqst+0x931/0xec0 [cifs]
[  750.423579] [   T9870]  ? kernel_text_address+0x173/0x190
[  750.424056] [   T9870]  ? kasan_save_stack+0x39/0x70
[  750.424813] [   T9870]  ? kasan_save_track+0x18/0x70
[  750.425323] [   T9870]  ? __kasan_slab_alloc+0x9d/0xa0
[  750.425831] [   T9870]  ? __pfx___smb_send_rqst+0x10/0x10 [cifs]
[  750.426548] [   T9870]  ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs]
[  750.427231] [   T9870]  ? cifs_call_async+0x277/0xb00 [cifs]
[  750.427882] [   T9870]  ? cifs_issue_write+0x256/0x610 [cifs]
[  750.428909] [   T9870]  ? netfs_do_issue_write+0xc2/0x340 [netfs]
[  750.429425] [   T9870]  ? netfs_advance_write+0x45b/0x1270 [netfs]
[  750.429882] [   T9870]  ? netfs_write_folio+0xd6c/0x1be0 [netfs]
[  750.430345] [   T9870]  ? netfs_writepages+0x2e9/0xa80 [netfs]
[  750.430809] [   T9870]  ? do_writepages+0x21f/0x590
[  750.431239] [   T9870]  ? filemap_fdatawrite_wbc+0xe1/0x140
[  750.431652] [   T9870]  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.432041] [   T9870]  smb_send_rqst+0x22e/0x2f0 [cifs]
[  750.432586] [   T9870]  ? __pfx_smb_send_rqst+0x10/0x10 [cifs]
[  750.433108] [   T9870]  ? local_clock_noinstr+0xe/0xd0
[  750.433482] [   T9870]  ? kasan_save_alloc_info+0x37/0x60
[  750.433855] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.434214] [   T9870]  ? _raw_spin_lock+0x81/0xf0
[  750.434561] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.434903] [   T9870]  ? smb2_setup_async_request+0x293/0x580 [cifs]
[  750.435394] [   T9870]  cifs_call_async+0x477/0xb00 [cifs]
[  750.435892] [   T9870]  ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[  750.436388] [   T9870]  ? __pfx_cifs_call_async+0x10/0x10 [cifs]
[  750.436881] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.437237] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.437579] [   T9870]  ? __smb2_plain_req_init+0x933/0x1090 [cifs]
[  750.438062] [   T9870]  smb2_async_writev+0x15ff/0x2460 [cifs]
[  750.438557] [   T9870]  ? sched_clock_noinstr+0x9/0x10
[  750.438906] [   T9870]  ? local_clock_noinstr+0xe/0xd0
[  750.439293] [   T9870]  ? __pfx_smb2_async_writev+0x10/0x10 [cifs]
[  750.439786] [   T9870]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[  750.440143] [   T9870]  ? _raw_spin_unlock+0xe/0x40
[  750.440495] [   T9870]  ? cifs_pick_channel+0x242/0x370 [cifs]
[  750.440989] [   T9870]  cifs_issue_write+0x256/0x610 [cifs]
[  750.441492] [   T9870]  ? cifs_issue_write+0x256/0x610 [cifs]
[  750.441987] [   T9870]  netfs_do_issue_write+0xc2/0x340 [netfs]
[  750.442387] [   T9870]  netfs_advance_write+0x45b/0x1270 [netfs]
[  750.442969] [   T9870]  ? rolling_buffer_append+0x12d/0x440 [netfs]
[  750.443376] [   T9870]  netfs_write_folio+0xd6c/0x1be0 [netfs]
[  750.443768] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.444145] [   T9870]  netfs_writepages+0x2e9/0xa80 [netfs]
[  750.444541] [   T9870]  ? __pfx_netfs_writepages+0x10/0x10 [netfs]
[  750.444936] [   T9870]  ? exit_files+0xab/0xe0
[  750.445312] [   T9870]  ? do_exit+0x148f/0x2980
[  750.445672] [   T9870]  ? do_group_exit+0xb5/0x250
[  750.446028] [   T9870]  ? arch_do_signal_or_restart+0x92/0x630
[  750.446402] [   T9870]  ? exit_to_user_mode_loop+0x98/0x170
[  750.446762] [   T9870]  ? do_syscall_64+0x2cf/0xd80
[  750.447132] [   T9870]  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.447499] [   T9870]  do_writepages+0x21f/0x590
[  750.447859] [   T9870]  ? __pfx_do_writepages+0x10/0x10
[  750.448236] [   T9870]  filemap_fdatawrite_wbc+0xe1/0x140
[  750.448595] [   T9870]  __filemap_fdatawrite_range+0xba/0x100
[  750.448953] [   T9870]  ? __pfx___filemap_fdatawrite_range+0x10/0x10
[  750.449336] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.449697] [   T9870]  filemap_write_and_wait_range+0x7d/0xf0
[  750.450062] [   T9870]  cifs_flush+0x153/0x320 [cifs]
[  750.450592] [   T9870]  filp_flush+0x107/0x1a0
[  750.450952] [   T9870]  filp_close+0x14/0x30
[  750.451322] [   T9870]  put_files_struct.part.0+0x126/0x2a0
[  750.451678] [   T9870]  ? __pfx__raw_spin_lock+0x10/0x10
[  750.452033] [   T9870]  exit_files+0xab/0xe0
[  750.452401] [   T9870]  do_exit+0x148f/0x2980
[  750.452751] [   T9870]  ? __pfx_do_exit+0x10/0x10
[  750.453109] [   T9870]  ? __kasan_check_write+0x14/0x30
[  750.453459] [   T9870]  ? _raw_spin_lock_irq+0x8a/0xf0
[  750.453787] [   T9870]  do_group_exit+0xb5/0x250
[  750.454082] [   T9870]  get_signal+0x22d3/0x22e0
[  750.454406] [   T9870]  ? __pfx_get_signal+0x10/0x10
[  750.454709] [   T9870]  ? fpregs_assert_state_consistent+0x68/0x100
[  750.455031] [   T9870]  ? folio_add_lru+0xda/0x120
[  750.455347] [   T9870]  arch_do_signal_or_restart+0x92/0x630
[  750.455656] [   T9870]  ? __pfx_arch_do_signal_or_restart+0x10/0x10
[  750.455967] [   T9870]  exit_to_user_mode_loop+0x98/0x170
[  750.456282] [   T9870]  do_syscall_64+0x2cf/0xd80
[  750.456591] [   T9870]  ? __kasan_check_read+0x11/0x20
[  750.456897] [   T9870]  ? count_memcg_events+0x1b4/0x420
[  750.457280] [   T9870]  ? handle_mm_fault+0x148/0x690
[  750.457616] [   T9870]  ? _raw_spin_lock_irq+0x8a/0xf0
[  750.457925] [   T9870]  ? __kasan_check_read+0x11/0x20
[  750.458297] [   T9870]  ? fpregs_assert_state_consistent+0x68/0x100
[  750.458672] [   T9870]  ? irqentry_exit_to_user_mode+0x2e/0x250
[  750.459191] [   T9870]  ? irqentry_exit+0x43/0x50
[  750.459600] [   T9870]  ? exc_page_fault+0x75/0xe0
[  750.460130] [   T9870]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  750.460570] [   T9870] RIP: 0033:0x7858c94ab6e2
[  750.461206] [   T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8.
[  750.461780] [   T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022
[  750.462327] [   T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2
[  750.462653] [   T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[  750.462969] [   T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000
[  750.463290] [   T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0
[  750.463640] [   T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230
[  750.463965] [   T9870]  </TASK>
[  750.464285] [   T9870] Modules linked in: siw ib_uverbs ccm cmac nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm ib_core cifs_md4 netfs softdog vboxsf vboxguest cpuid intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_class intel_pmc_ssram_telemetry intel_vsec polyval_clmulni ghash_clmulni_intel sha1_ssse3 aesni_intel rapl i2c_piix4 i2c_smbus joydev input_leds mac_hid sunrpc binfmt_misc kvm_intel kvm irqbypass sch_fq_codel efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock vmw_vmci dmi_sysfs ip_tables x_tables autofs4 hid_generic vboxvideo usbhid drm_vram_helper psmouse vga16fb vgastate drm_ttm_helper serio_raw hid ahci libahci ttm pata_acpi video wmi [last unloaded: vboxguest]
[  750.467127] [   T9870] CR2: ffff8880110a2000

cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Fixes: c45ebd636c32 ("cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: fix first command failure during re-negotiation

after fabc4ed200f9, server_unresponsive add a condition to check whether client
need to reconnect depending on server->lstrp. When client failed to reconnect
for some time and abort connection, server->lstrp is updated for the last time.
In the following scene, server->lstrp is too old. This cause next command
failure in re-negotiation rather than waiting for re-negotiation done.

1. mount -t cifs -o username=Everyone,echo_internal=10 //$server_ip/export /mnt
2. ssh $server_ip "echo b > /proc/sysrq-trigger &"
3. ls /mnt
4. sleep 21s
5. ssh $server_ip "service firewalld stop"
6. ls # return EHOSTDOWN

If the interval between 5 and 6 is too small, 6 may trigger sending negotiation
request. Before backgrounding cifsd thread try to receive negotiation response
from server in cifs_readv_from_socket, server_unresponsive may trigger
cifs_reconnect which cause 6 to be failed:

ls thread
----------------
  smb2_negotiate
    server->tcpStatus = CifsInNegotiate
    compound_send_recv
      wait_for_compound_request

cifsd thread
----------------
  cifs_readv_from_socket
    server_unresponsive
      server->tcpStatus == CifsInNegotiate && jiffies > server->lstrp + 20s
        cifs_reconnect
          cifs_abort_connection: mid_state = MID_RETRY_NEEDED

ls thread
----------------
      cifs_sync_mid_result return EAGAIN
  smb2_negotiate return EHOSTDOWN

Though server->lstrp means last server response time, it is updated in
cifs_abort_connection and cifs_get_tcp_session. We can also update server->lstrp
before switching into CifsInNegotiate state to avoid failure in 6.

Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: zhangjian <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'io_uring-6.16-20250621' of git://git.kernel.dk/linux

Pull io_uring fix from Jens Axboe:
 "A single fix to hopefully wrap up the saga of receive bundles"

* tag 'io_uring-6.16-20250621' of git://git.kernel.dk/linux:
  io_uring/net: always use current transfer count for buffer put

Merge tag 'acpi-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix a crash in ACPICA while attempting to evaluate a control method
  that expects more arguments than are being passed to it, which was
  exposed by a defective firmware update from a prominent OEM on
  multiple systems (Rafael Wysocki)"

* tag 'acpi-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Refuse to evaluate a method if arguments are missing

Merge tag 'pci-v6.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI fixes from Bjorn Helgaas:

 - Set up runtime PM even for devices that lack a PM Capability as we
   did before 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when
   initializing"), which broke resume in some VFIO scenarios (Mario
   Limonciello)

 - Ignore pciehp Presence Detect Changed events caused by DPC, even if
   they occur after a Data Link Layer State Changed event, to fix a VFIO
   GPU passthrough regression in v6.13 (Lukas Wunner)

* tag 'pci-v6.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: pciehp: Ignore belated Presence Detect Changed caused by DPC
  PCI/PM: Set up runtime PM even for devices without PCI PM

Merge tag 'rcu/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux

Pull RCU fix from Joel Fernandes:
 "We recently got a report of a crash [1] with misuse of call_rcu().

  Instead of crashing the kernel, a warning and graceful return is
  better:

   - rcu: Return early if callback is not specified (Uladzislau Rezki)"

Link: https://lore.kernel.org/all/aEnVuzK7VhGSizWj@pc636/
* tag 'rcu/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
  rcu: Return early if callback is not specified

Merge tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix some file descriptor leaks that stand out with recent changes to
   'perf list'

 - Fix prctl include to fix building 'perf bench futex' hash with musl
   libc

 - Restrict 'perf test' uniquifying entry to machines with 'uncore_imc'
   PMUs

 - Document new output fields (op, cache, mem, dtlb, snoop) used with
   'perf mem'

 - Synchronize kernel header copies

* tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools headers x86 cpufeatures: Sync with the kernel sources
  perf bench futex: Fix prctl include in musl libc
  perf test: Directory file descriptor leak
  perf evsel: Missed close() when probing hybrid core PMUs
  tools headers: Synchronize linux/bits.h with the kernel sources
  tools arch amd ibs: Sync ibs.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Syncronize linux/build_bug.h with the kernel sources
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync the drm/drm.h with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync kvm header with the kernel sources
  tools headers x86 svm: Sync svm headers with the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  tools kvm headers arm64: Update KVM header from the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources to pick FUTEX knob
  perf mem: Document new output fields (op, cache, mem, dtlb, snoop)
  tools headers: Update the fs headers with the kernel sources
  perf test: Restrict uniquifying test to machines with 'uncore_imc'

Merge tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
 "The main fix that really needs to get in is the revert of the patch
  adding the new mtd_master class, because it entirely fails the
  partitioning if a specific Kconfig option is set. We need to think how
  to handle that differently, so let's revert it as we need to get back
  to the pen and paper situation again.

  Otherwise the definition of some Winbond SPI NAND chips are receiving
  some fixes (geometry and maximum frequency, mostly).

  And finally a small memory leak gets also fixed"

* tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spinand: fix memory leak of ECC engine conf
  mtd: spinand: winbond: Prevent unsupported frequencies on dual/quad I/O variants
  mtd: spinand: winbond: Increase maximum frequency on an octal operation
  mtd: spinand: winbond: Fix W35N number of planes/LUN
  Revert "mtd: core: always create master device"

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small and obvious driver fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: elx: efct: Fix memory leak in efct_hw_parse_filter()
  scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()

irqchip/ath79-misc: Fix missing prototypes warnings

ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.

The build also warns about a missing prototype of get_c0_perfcount_int().

Remove the stale leftover function and add the missing include.

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com

rcu: Return early if callback is not specified

Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.

To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>

KVM: TDX: Exit to userspace for GetTdVmCallInfo

Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX,
to allow userspace to provide information about the support of
TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API.

GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>,
<ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>,
<Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and
<Instruction.WRMSR>. They must be supported by VMM to support TDX guests.

For GetTdVmCallInfo
- When leaf (r12) to enumerate TDVMCALL functionality is set to 0,
  successful execution indicates all GHCI base TDVMCALLs listed above are
  supported.

  Update the KVM TDX document with the set of the GHCI base APIs.

- When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it
  indicates the TDX guest is querying the supported TDVMCALLs beyond
  the GHCI base TDVMCALLs.
  Exit to userspace to let userspace set the TDVMCALL sub-function bit(s)
  accordingly to the leaf outputs.  KVM could set the TDVMCALL bit(s)
  supported by itself when the TDVMCALLs don't need support from userspace
  after returning from userspace and before entering guest. Currently, no
  such TDVMCALLs implemented, KVM just sets the values returned from
  userspace.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>

Handle TDVMCALL for GetQuote to generate a TD-Quote.

GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host.  A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter.  Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave.  When completed, the
Quote is returned via the same shared-memory area.

KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI.  KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously.  KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not.  When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not.  When completed, the generated Quote is returned via the same
buffer.

Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete.  While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.

Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs

Add the new TDVMCALL status code TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED and
return it for unimplemented TDVMCALL subfunctions.

Returning TDVMCALL_STATUS_INVALID_OPERAND when a subfunction is not
implemented is vague because TDX guests can't tell the error is due to
the subfunction is not supported or an invalid input of the subfunction.
New GHCI spec adds TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED to avoid the
ambiguity. Use it instead of TDVMCALL_STATUS_INVALID_OPERAND.

Before the change, for common guest implementations, when a TDX guest
receives TDVMCALL_STATUS_INVALID_OPERAND, it has two cases:
1. Some operand is invalid. It could change the operand to another value
   retry.
2. The subfunction is not supported.

For case 1, an invalid operand usually means the guest implementation bug.
Since the TDX guest can't tell which case is, the best practice for
handling TDVMCALL_STATUS_INVALID_OPERAND is stopping calling such leaf,
treating the failure as fatal if the TDVMCALL is essential or ignoring
it if the TDVMCALL is optional.

With this change, TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED could be sent to
old TDX guest that do not know about it, but it is expected that the
guest will make the same action as TDVMCALL_STATUS_INVALID_OPERAND.
Currently, no known TDX guest checks TDVMCALL_STATUS_INVALID_OPERAND
specifically; for example Linux just checks for success.

Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Return it for untrapped KVM_HC_MAP_GPA_RANGE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - correct the ACPI GPIO access mode in gpio-loongson-64bit

 - only obtain the interrupt for a single instance of the chip
   controlled by gpio-mlxbf3

 - fix an invalid value return from probe() in gpio-pca953x

 - add missing MODULE_DEVICE_TABLE() to gpio-spacemit

 - update the HiSilicon GPIO driver maintainer entry

* tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf3: only get IRQ for device instance 0
  gpio: pca953x: fix wrong error probe return value
  gpio: spacemit: Add missing MODULE_DEVICE_TABLE
  gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access mode
  MAINTAINERS: Update HiSilicon GPIO driver maintainer

Merge tag 'kvm-riscv-fixes-6.16-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 6.16, take #1

- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs

Merge tag 'kvmarm-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.16, take #3

- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
  missing synchronisation

- A small fix for the irqbypass hook fixes, tightening the check and
  ensuring that we only deal with MSI for both the old and the new
  route entry

- Rework the way the shadow LRs are addressed in a nesting
  configuration, plugging an embarrassing bug as well as simplifying
  the whole process

- Add yet another fix for the dreaded arch_timer_edge_cases selftest

Merge tag 'sound-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes. All changes are device-specific at this
  time:

   - Fixes for Cirrus codecs with SoundWire, including firmware name
     updates

   - Fix for i.MX8 SoC DSP

   - Usual HD-audio, USB-audio, and ASoC AMD quirks

   - Fixes for legendary SoundBlaster AWE32 ISA device (a real one, we
     still got a bug report after 25 years)

   - Minor build fixes"

* tag 'sound-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda/realtek: Enable headset Mic on Positivo P15X
  ASoC: Intel: sof-function-topology-lib: Print out the unsupported dmic count
  ASoC: doc: cs35l56: Add CS35L63 to the list of supported devices
  ASoC: SOF: imx8: add core shutdown operation for imx8/imx8x
  ALSA: hda/realtek: Add quirk for Asus GA605K
  ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged
  ASoC: amd: yc: update quirk data for HP Victus
  ASoC: apple: mca: Drop default ARCH_APPLE in Kconfig
  ALSA: usb-audio: Rename ALSA kcontrol PCM and PCM1 for the KTMicro sound card
  ASoC: amd: yc: Add quirk for MSI Bravo 17 D7VF internal mic
  ASoC: doc: cs35l56: Update to add new SoundWire firmware filename suffix
  ASoC: cs35l56: Use SoundWire address as alternate firmware suffix on L56 B0
  ASoC: cs35l56: Use SoundWire address as firmware name suffix for new silicon
  ASoC: sdw_utils: Fix potential NULL pointer deref in is_sdca_endpoint_present()
  ALSA: sb: Force to disable DMAs once when DMA mode is changed
  ALSA: sb: Don't allow changing the DMA mode during operations
  ALSA: hda/realtek: Add quirk for Asus GU605C
  ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X513EA
  ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP Victus 15-fa1xxx
  ALSA: ctxfi: Replace deprecated strcpy() with strscpy()
  ...

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "There's nothing major (even the vmalloc one is just suppressing a
  potential warning) but all worth having, nonetheless.

   - Suppress KASAN false positive in stack unwinding code

   - Drop redundant reset of the GCS state on exec()

   - Don't try to descend into a !present PMD when creating a huge
     vmap() entry at the PUD level

   - Fix a small typo in the arm64 booting Documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
  arm64/gcs: Don't call gcs_free() during flush_gcs()
  arm64: Restrict pagetable teardown to avoid false warning
  docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst

erofs: remove a superfluous check for encoded extents

It is possible when an inode is split into segments for multi-threaded
compression, and the tail extent of a segment could also be small.

Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250620153108.1368029-1-hsiangkao@linux.alibaba.com

io_uring/net: always use current transfer count for buffer put

A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.

Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123c8 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ALSA: hda/realtek: Enable headset Mic on Positivo P15X

Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.16-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.16

A relatively large collection of fixes and updates that came in since
the merge window.  Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.

Merge tag 'block-6.16-20250619' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - Two fixes for aoe which fixes issues dating back to when this driver
   was converted to blk-mq

 - Fix for ublk, checking for valid queue depth and count values before
   setting up a device

* tag 'block-6.16-20250619' of git://git.kernel.dk/linux:
  ublk: santizize the arguments from userspace when adding a device
  aoe: defer rexmit timer downdev work to workqueue
  aoe: clean device rq_list in aoedev_downdev()

Merge tag 'io_uring-6.16-20250619' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

 - Two fixes for error injection failures. One fixes a task leak issue
   introduced in this merge window, the other an older issue with
   handling allocation of a mapped buffer.

 - Fix for a syzbot issue that triggers a kmalloc warning on attempting
   an allocation that's too large

 - Fix for an error injection failure causing a double put of a task,
   introduced in this merge window

* tag 'io_uring-6.16-20250619' of git://git.kernel.dk/linux:
  io_uring: fix potential page leak in io_sqe_buffer_register()
  io_uring/sqpoll: don't put task_struct on tctx setup failure
  io_uring: remove duplicate io_uring_alloc_task_context() definition
  io_uring: fix task leak issue in io_wq_create()
  io_uring/rsrc: validate buffer count with offset for cloning

Merge tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Bit of an uptick in fixes for rc3, msm and amdgpu leading the way,
  with i915/xe/nouveau with a few each and then some scattered misc
  bits, nothing looks too crazy:

  msm:
   - Display:
      - Fixed DP output on SDM845
      - Fixed 10nm DSI PLL init
   - GPU:
      - SUBMIT ioctl error path leak fixes
      - drm half of stall-on-fault fixes
      - a7xx: Missing CP_RESET_CONTEXT_STATE
      - Skip GPU component bind if GPU is not in the device table

  i915:
   - Fix MIPI vtotal programming off by one on Broxton
   - Fix PMU code for GCOV and AutoFDO enabled build

  xe:
   - A workaround update
   - Fix memset on iomem
   - Fix early wedge on GuC Load failure

  amdgpu:
   - DP tunneling fix
   - LTTPR fix
   - DSC fix
   - DML2.x ABGR16161616 fix
   - RMCM fix
   - Backlight fixes
   - GFX11 kicker support
   - SDMA reset fixes
   - VCN 5.0.1 fix
   - Reset fix
   - Misc small fixes

  amdkfd:
   - SDMA reset fix
   - Fix race in GWS scheduling

  nouveau:
   - update docs reference
   - fix backlight name buffer size
   - fix UAF in r535 gsp rpc msg
   - fix undefined shift

  mgag200:
   - drop export header

  ast:
   - drop export header

  malidp:
   - drop informational error

  ssd130x:
   - fix clear columns

  etnaviv:
   - scheduler locking fix

  v3d:
   - null pointer crash fix"

* tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
  drm/xe: Fix early wedge on GuC load failure
  drm/xe: Fix memset on iomem
  drm/xe/bmg: Update Wa_16023588340
  drm/amdgpu/sdma5.2: init engine reset mutex
  drm/amdkfd: Fix race in GWS queue scheduling
  drm/amdgpu/sdma5: init engine reset mutex
  drm/amdgpu: switch job hw_fence to amdgpu_fence
  drm/amdgpu: Fix SDMA UTC_L1 handling during start/stop sequences
  drm/amdgpu: Release reset locks during failures
  drm/amd/display: Check dce_hwseq before dereferencing it
  drm/amdgpu: VCN v5_0_1 to prevent FW checking RB during DPG pause
  drm/amdgpu: Use logical instance ID for SDMA v4_4_2 queue operations
  drm/amdgpu: Fix SDMA engine reset with logical instance ID
  drm/amdgpu: add kicker fws loading for gfx11/smu13/psp13
  drm/amdgpu: Add kicker device detection
  drm/amd/display: Export full brightness range to userspace
  drm/amd/display: Only read ACPI backlight caps once
  drm/amd/display: Fix RMCM programming seq errors
  drm/amd/display: Fix mpv playback corruption on weston
  drm/amd/display: Add more checks for DSC / HUBP ONO guarantees
  ...

Merge tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in ahash (broken fallback finup) and
  reinstates a Kconfig option to control the extra self-tests"

* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ahash - Fix infinite recursion in ahash_def_finup
  crypto: testmgr - reinstate kconfig control over full self-tests

Merge tag 'spi-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fix from Mark Brown:
 "One fix here from Thierry, fixing crashes caused by attempting to do
  cache sync operations on uncached memory on Tegra platforms"

* tag 'spi-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra210-qspi: Remove cache operations

Merge tag 'regulator-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One patch here from Heiko which fixes stability issues on some
  Rockchip platforms by implementing soft start support and providing
  startup time information for their regulators"

* tag 'regulator-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fan53555: add enable_time support and soft-start times

Merge tag 'drm-xe-fixes-2025-06-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes

Driver Changes:
- A workaround update (Vinay)
- Fix memset on iomem (Lucas)
- Fix early wedge on GuC Load failure (Daniele)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aFQ03kNzhbiNK7gW@fedora

Merge tag 'drm-misc-fixes-2025-06-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.16-rc3:
- vivante scheduler fix.
- v3d null pointer crash fix.
- fix backlight, booting GSP-RM, and potential integer shift overflow in nouveau.
- fix compiler warnings about unused linux/export.h
- fix malidp unknown modifier spam.
- fix for ssd130x.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/d44bab7b-01f8-45a8-a7f4-5d3d563d2f9d@linux.intel.com

Merge tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless.

  The ath12k fix to avoid FW crashes requires adding support for a
  number of new FW commands so it's quite large in terms of LoC. The
  rest is relatively small.

  Current release - fix to a fix:

   - ptp: fix breakage after ptp_vclock_in_use() rework

  Current release - regressions:

   - openvswitch: allocate struct ovs_pcpu_storage dynamically, static
     allocation may exhaust module loader limit on smaller systems

  Previous releases - regressions:

   - tcp: fix tcp_packet_delayed() for peers with no selective ACK
     support

  Previous releases - always broken:

   - wifi: ath12k: don't activate more links than firmware supports

   - tcp: make sure sockets open via passive TFO have valid NAPI ID

   - eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
     reset, prevent Rx queues from silently hanging after queue reset

   - NFC: uart: set tty->disc_data only in success path"

* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
  net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
  net: airoha: Compute number of descriptors according to reserved memory size
  tools: ynl: fix mixing ops and notifications on one socket
  net: atm: fix /proc/net/atm/lec handling
  net: atm: add lec_mutex
  mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
  net: airoha: Always check return value from airoha_ppe_foe_get_entry()
  NFC: nci: uart: Set tty->disc_data only in success path
  calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
  MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
  net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
  eth: fbnic: avoid double free when failing to DMA-map FW msg
  tcp: fix passive TFO socket having invalid NAPI ID
  selftests: net: add test for passive TFO socket NAPI ID
  selftests: net: add passive TFO test binary
  selftests: netdevsim: improve lib.sh include in peer.sh
  tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
  Octeontx2-pf: Fix Backpresure configuration
  net: ftgmac100: select FIXED_PHY
  net: ethtool: remove duplicate defines for family info
  ...

mtd: spinand: fix memory leak of ECC engine conf

Memory allocated for the ECC engine conf is not released during spinand
cleanup. Below kmemleak trace is seen for this memory leak:

unreferenced object 0xffffff80064f00e0 (size 8):
  comm "swapper/0", pid 1, jiffies 4294937458
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace (crc 0):
    kmemleak_alloc+0x30/0x40
    __kmalloc_cache_noprof+0x208/0x3c0
    spinand_ondie_ecc_init_ctx+0x114/0x200
    nand_ecc_init_ctx+0x70/0xa8
    nanddev_ecc_engine_init+0xec/0x27c
    spinand_probe+0xa2c/0x1620
    spi_mem_probe+0x130/0x21c
    spi_probe+0xf0/0x170
    really_probe+0x17c/0x6e8
    __driver_probe_device+0x17c/0x21c
    driver_probe_device+0x58/0x180
    __device_attach_driver+0x15c/0x1f8
    bus_for_each_drv+0xec/0x150
    __device_attach+0x188/0x24c
    device_initial_probe+0x10/0x20
    bus_probe_device+0x11c/0x160

Fix the leak by calling nanddev_ecc_engine_cleanup() inside
spinand_cleanup().

Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Merge tag 'hwmon-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - ltc4282: Avoid repeated register write operation

 - occ: Fix unaligned accesses, and rework attribute registration to
   reduce stack usage

 - ftsteutates: Fix TOCTOU race

* tag 'hwmon-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ltc4282) avoid repeated register write
  hwmon: (occ) fix unaligned accesses
  hwmon: (occ) Rework attribute registration for stack usage
  hwmon: (ftsteutates) Fix TOCTOU race in fts_read()

Merge branch 'net-airoha-improve-hwfd-buffer-descriptor-queues-setup'

Lorenzo Bianconi says:

====================
net: airoha: Improve hwfd buffer/descriptor queues setup

Compute the number of hwfd buffers/descriptors according to the reserved
memory size if provided via DTS.

Reduce the required hwfd buffers queue size for QDMA1.

v3: https://lore.kernel.org/20250618-airoha-hw-num-desc-v3-0-18a6487cd75e@kernel.org
v1: https://lore.kernel.org/20250615-airoha-hw-num-desc-v1-0-8f88daa4abd7@kernel.org
====================

Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-0-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1

EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: airoha: Compute number of descriptors according to reserved memory size

In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).

Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
More fixes:
 - ath12k
   - avoid busy-waiting
   - activate correct number of links
 - iwlwifi
   - iwldvm regression (lots of warnings)
   - iwlmld merge damage regression (crash)
   - fix build with some old gcc versions
 - carl9170: don't talk to device w/o FW [syzbot]
 - ath6kl: remove bad FW WARN [syzbot]
 - ieee80211: use variable-length arrays [syzbot]
 - mac80211
   - remove WARN on delayed beacon update [syzbot]
   - drop OCB frames with invalid source [syzbot]

* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
  wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
  wifi: iwlwifi: cfg: Limit cb_size to valid range
  wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
  wifi: ath6kl: remove WARN on bad firmware input
  wifi: carl9170: do not ping device which has failed to load firmware
  wifi: ath12k: don't wait when there is no vdev started
  wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
  wifi: ath12k: avoid burning CPU while waiting for firmware stats
  wifi: ath12k: fix documentation on firmware stats
  wifi: ath12k: don't activate more links than firmware supports
  wifi: ath12k: update link active in case two links fall on the same MAC
  wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
  wifi: ath12k: update freq range for each hardware mode
  wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
  wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
  wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
  wifi: mac80211: don't WARN for late channel/color switch
  wifi: mac80211: drop invalid source address OCB frames
  wifi: remove zero-length arrays
====================

Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: fix mixing ops and notifications on one socket

The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.

Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:

 # File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
 # Exception|     return self._ops(ops)[0]
 # Exception|            ~~~~~~~~~^^^^^
 # File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
 # Exception|     nms = NlMsgs(reply, attr_space=op.attr_set)
 # Exception|                                    ^^^^^^^^^^^

The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.

Fixes: 6fda63c45fe8 ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68f5 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'with-a-mutex'

Eric Dumazet says:

====================
net: atm: protect dev_lec[] with a mutex

Based on an initial syzbot report.

First patch is adding lec_mutex to address the report.

Second patch protects /proc/net/atm/lec operations.

We probably should delete this driver, it seems quite broken.
====================

Link: https://patch.msgid.link/20250618140844.1686882-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: atm: fix /proc/net/atm/lec handling

/proc/net/atm/lec must ensure safety against dev_lec[] changes.

It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # Minor atm contributor
Link: https://patch.msgid.link/20250618140844.1686882-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: atm: add lec_mutex

syzbot found its way in net/atm/lec.c, and found an error path
in lecd_attach() could leave a dangling pointer in dev_lec[].

Add a mutex to protect dev_lecp[] uses from lecd_attach(),
lec_vcc_attach() and lec_mcast_attach().

Following patch will use this mutex for /proc/net/atm/lec.

BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline]
BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142

CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
  print_address_description mm/kasan/report.c:408 [inline]
  print_report+0xcd/0x680 mm/kasan/report.c:521
  kasan_report+0xe0/0x110 mm/kasan/report.c:634
  lecd_attach net/atm/lec.c:751 [inline]
  lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
  do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
  sock_do_ioctl+0x118/0x280 net/socket.c:1190
  sock_ioctl+0x227/0x6b0 net/socket.c:1311
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:907 [inline]
  __se_sys_ioctl fs/ioctl.c:893 [inline]
  __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
  do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
  do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

Allocated by task 6132:
  kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
  kasan_save_track+0x14/0x30 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
  __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
  kasan_kmalloc include/linux/kasan.h:260 [inline]
  __do_kmalloc_node mm/slub.c:4328 [inline]
  __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015
  alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711
  lecd_attach net/atm/lec.c:737 [inline]
  lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008
  do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
  sock_do_ioctl+0x118/0x280 net/socket.c:1190
  sock_ioctl+0x227/0x6b0 net/socket.c:1311
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:907 [inline]
  __se_sys_ioctl fs/ioctl.c:893 [inline]
  __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
  do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
  do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 6132:
  kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
  kasan_save_track+0x14/0x30 mm/kasan/common.c:68
  kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576
  poison_slab_object mm/kasan/common.c:247 [inline]
  __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
  kasan_slab_free include/linux/kasan.h:233 [inline]
  slab_free_hook mm/slub.c:2381 [inline]
  slab_free mm/slub.c:4643 [inline]
  kfree+0x2b4/0x4d0 mm/slub.c:4842
  free_netdev+0x6c5/0x910 net/core/dev.c:11892
  lecd_attach net/atm/lec.c:744 [inline]
  lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008
  do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
  sock_do_ioctl+0x118/0x280 net/socket.c:1190
  sock_ioctl+0x227/0x6b0 net/socket.c:1311
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:907 [inline]
  __se_sys_ioctl fs/ioctl.c:893 [inline]
  __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+8b64dec3affaed7b3af5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6852c6f6.050a0220.216029.0018.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250618140844.1686882-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available

The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.

Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: airoha: Always check return value from airoha_ppe_foe_get_entry()

airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()

Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NFC: nci: uart: Set tty->disc_data only in success path

Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths.  This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?).  Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.

The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified.  This however should not be relevant
difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().

Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 9961127d4bce ("NFC: nci: add generic uart support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>