t/helper: stop setting up `the_repository` repeatedly
The "repository" test helper sets up `the_repository` twice. In fact
though, we don't even have to set it up even once: all we need is to set
up its hash algorithm, because we still depend on some subsystems that
aren't free of `the_repository`.
Refactor the code accordingly. This prepares for a subsequent change,
where setting up the repository repeatedly will lead to a `BUG()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asked to perform object consistency checks via the `--fsck-objects`
flag we verify that each object part of the pack is valid. In general,
this check can even be performed outside of a Git repository: we don't
need an initialized object database as we simply read the object from
the packfile directly.
But there's one exception: a subset of the object checks may be deferred
to a later point in time. For now, this only concerns ".gitmodules" and
".gitattributes" files: whenever we see a tree referencing these files
we queue them for a deferred check. This is done because we need to do
some extra checks for those files to ensure that they are well-formed,
and these checks need to be done regardless of whether the corresponding
blobs are part of the packfile or not.
This works inside a repository, but unfortunately the logic leads to a
segfault when running outside of one. This is because we eventually call
`odb_read_object()`, which will crash because the object database has
not been initialized.
There's multiple options here:
- We could in theory create a purely in-memory database with only a
packfile store that contains the single packfile. We don't really
have the infrastructure for this yet though, and it would end up
being quite hacky.
- We could refuse to perform consistency checks outside of a
repository. But most of the checks work alright, so this would be a
regression.
- We can skip the finalizing consistency checks when running outside
of a repository. This is not as invasive as skipping all checks,
but it's not great to randomly skip a subset of tests, either.
None of these options really feel perfect. The first one would be the
obvious choice if easily possible.
There's another option though: instead of skipping the final object
checks, we can die if there are any queued object checks. With this
change we now die exactly if and only if we would have previously
segfaulted. Like this we ensure that objects that _may_ fail the
consistency checks won't be silently skipped, and at the same time we
give users a much better error message.
Refactor the code accordingly and add a test that would have triggered
the segfault. Note that we also move down the logic to add the packfile
to the store. There is no point doing this any earlier than right before
we execute `fsck_finish()`, and it ensures that the logic to set up and
perform the consistency check is self-contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our object database sources have a field `disable_ref_updates`. This
field can obviously be set to disable reference updates, but it is
somewhat curious that this logic is hosted by the object database.
The reason for this is that it was primarily added to keep us from
accidentally updating references while an ODB transaction is ongoing.
Any objects part of the transaction have not yet been committed to disk,
so new references that point to them might get corrupted in case we
never end up committing the transaction. As such, whenever we create a
new transaction we set up a new temporary ODB source and mark it as
disabling reference updates.
This has one (and only one?) upside: once we have committed the
transaction, the temporary source will be dropped and thus we clean up
the disabled reference updates automatically. But other than that, it's
somewhat misdesigned:
- We can have multiple ODB sources, but only the currently active
source inhibits reference updates.
- We're mixing concerns of the refdb with the ODB.
Arguably, the decision of whether we can update references or not should
be handled by the refdb. But that wouldn't be a great fit either, as
there can be one refdb per worktree. So we'd again have the same problem
that a "global" intent becomes localized to a specific instance.
Instead, move the setting into the repository. While at it, convert it
into a boolean.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `odb_clear()` releases all resources allocated to an object
database and ensures that all fields become zero'd out. Despite its
naming though it doesn't really clear the object database so that it
becomes ready for reuse afterwards again -- the caller would first have
to reinitialize it, and that contradicts the terminology of "clearing"
as we have defined it in our coding guidelines.
There isn't really only a reason to have "clearing" semantics, either.
There's only a single caller of `odb_clear()`, and that caller also ends
up freeing the object database structure itself.
Refactor the function to have "freeing" semantics instead, so that the
structure itself is also freed, which allows us to drop some useless
boilerplate to zero out the structure's members.
This refactoring reveals that we're trying to close the commit graph
multiple times: once directly via `free_commit_graph()`, and once via
`odb_close()`. Drop the former call.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to close an object database is currently contained in the
packfile subsystem. That choice is somewhat relatable, as most of the
logic really is to close resources associated with the packfile store
itself. But we also end up handling object sources and commit graphs,
which certainly is not related to packfiles.
Move the function into the object database subsystem and rename it to
`odb_close()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't have any external callers of `set_git_dir()` anymore now that
`enter_repo()` has been moved into "setup.c". Remove the declaration and
mark the function as static.
Note that this change requires us to move the implementation around so
that we can avoid adding any new forward declarations.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `enter_repo()` is used to enter a repository at a given
path. As such it sits way closer to setting up a repository than it does
with handling paths, but regardless of that it's located in "path.c"
instead of in "setup.c".
Move the function into "setup.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Nov 2025 15:00:12 +0000 (07:00 -0800)]
Merge branch 'jc/ci-use-arm64-p4-on-macos'
We replaced deprecated macos-13 with macos-14 image in GitHub
Actions CI, but we forgot that the image is for arm64. We have
been seeing a lot of test failures ever since. Switch to arm64
binary for Perforce tests.
* jc/ci-use-arm64-p4-on-macos:
Use Perforce arm64 binary on macOS CI jobs
Junio C Hamano [Sun, 16 Nov 2025 23:10:28 +0000 (15:10 -0800)]
Use Perforce arm64 binary on macOS CI jobs
The previous step replaced deprecated macos-13 image with macos-14
image on GitHub Actions CI. While x86-64 binaries can work there,
because macos-14 images are arm64 based (we could replace it with
macos-14-large that is x86-64), it makes more sense to use arm64
binary there. Without this change, we have been getting unusually
higher rate of failures from random macOS CI jobs railing to run
t98xx series of tests.
Helped-by: Koji Nakamaru <koji.nakamaru@gree.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently added configuration variable and command line option
syntax ":(optional)" for values that are of filename type
inconsistently behaved on an empty file (configuration took it
happily, while the command line option pretended as if it did not
exist), which has been corrected.
* dk/parseopt-optional-filename-fixes:
parseopt: remove unreachable code
parseopt: restore const qualifier to parsed filename
config: use boolean type for a simple flag
parseopt: use boolean type for a simple flag
doc: clarify command equivalence comment
parseopt: fix :(optional) at command line to only ignore missing files
Junio C Hamano [Thu, 6 Nov 2025 23:17:01 +0000 (15:17 -0800)]
Merge branch 'cc/fast-import-export-i18n-cleanup'
Messages from fast-import/export are now marked for i18n.
* cc/fast-import-export-i18n-cleanup:
gpg-interface: mark a string for translation
fast-import: mark strings for translation
fast-export: mark strings for translation
gpg-interface: use left shift to define GPG_VERIFY_*
gpg-interface: simplify ssh fingerprint parsing
Bumps `actions/upload-artifact` from 4 to 5.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](https://github.com/actions/upload-artifact/compare/v4...v5)
Bumps `actions/download-artifact` from 5 to 6.
- [Release notes](https://github.com/actions/download-artifact/releases)
- [Commits](https://github.com/actions/download-artifact/compare/v5...v6)
Originally-authored-by: dependabot[bot] <support@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Tue, 4 Nov 2025 13:58:29 +0000 (08:58 -0500)]
meson: make GIT_HTML_PATH configurable
Makefile-based builds can configure Git's internal HTML_PATH by defining
htmldir, which is useful for packagers that put documentation in
different locations. Gentoo, for example, uses version-suffixed
directories like ${prefix}/share/doc/git-2.51 and puts the HTML
documentation in an 'html' subdirectory of the same.
Propagate the same configuration knob to Meson-based builds so that
"git --html-path" on such systems can be configured to output the
correct directory.
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Tue, 4 Nov 2025 18:14:57 +0000 (13:14 -0500)]
perl: also mark git-contacts executable
When installing git-contacts with Meson via -Dcontrib=contacts, the default
Perl generation fails to mark it executable. As a result, "git contacts"
reports "'contacts' is not a git command."
Unlike generate-script.sh, we aren't testing the basename here; so, glob
the script name in the case arm to match wherever the input comes from.
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Uhle [Wed, 5 Nov 2025 19:55:19 +0000 (20:55 +0100)]
wincred: align Makefile with other Makefiles in contrib
* Replace $(LOADLIBES) because it is deprecated since long and it is
used nowhere else in the git project.
* Use $(gitexecdir) instead of $(libexecdir) because config.mak defines
$(libexecdir) as $(prefix)/libexec, not as $(prefix)/libexec/git-core.
* Similar to other Makefiles, let install target rule create
$(gitexecdir) to make sure the directory exists before copying the
executable and also let it respect $(DESTDIR).
* Shuffle the lines for the default settings to align them with the
other Makefiles in contrib/credential.
* Define .PHONY for all special targets (all, install, clean).
Signed-off-by: Thomas Uhle <thomas.uhle@mailbox.tu-dresden.de> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 4 Nov 2025 17:34:20 +0000 (09:34 -0800)]
parseopt: remove unreachable code
At this point in the code after running skip_prefix() on the
variable and receiving the result in the same variable, the contents
of the variable can never be NULL. The function either (1) updates
the variable to point at a later part of the string it originally
pointed at, or (2) leaves it intact if the string does not have the
prefix. (1) will never make the variable NULL, and (2) cannot be
the source of NULL, because the variable cannot be NULL before
calling skip_prefix(), which would die immediately by dereferencing
the NULL pointer in that case.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Sun, 2 Nov 2025 16:17:48 +0000 (11:17 -0500)]
parseopt: restore const qualifier to parsed filename
This was unintentionally dropped in ccfcaf399f (parseopt: values of
pathname type can be prefixed with :(optional), 2025-09-28). Notably,
continue dropping the const qualifier when free'ing value; see 4049b9cfc0 (fix const issues with some functions, 2007-10-16) or 83838d5c1b (cast variable in call to free() in builtin/diff.c and
submodule.c, 2011-11-06) for more details on why.
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Sun, 2 Nov 2025 16:17:47 +0000 (11:17 -0500)]
config: use boolean type for a simple flag
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Sun, 2 Nov 2025 16:17:46 +0000 (11:17 -0500)]
parseopt: use boolean type for a simple flag
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Sun, 2 Nov 2025 16:17:45 +0000 (11:17 -0500)]
doc: clarify command equivalence comment
Documentation of command parsing for :(optional) includes a terse
comment; expand it to be clearer to readers.
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Sun, 2 Nov 2025 16:17:44 +0000 (11:17 -0500)]
parseopt: fix :(optional) at command line to only ignore missing files
Unlike the configuration option magic, the parseopt code also ignores
empty files: compare implementations from ccfcaf399f (parseopt: values
of pathname type can be prefixed with :(optional), 2025-09-28) and 749d6d166d (config: values of pathname type can be prefixed with
:(optional), 2025-09-28).
Unify the 2 by not ignoring empty files, which is less surprising and
the intended semantics from the first patch for config.
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 4 Nov 2025 15:48:07 +0000 (07:48 -0800)]
Merge branch 'qj/doc-my1stcontrib-email-verify'
The "MyFirstContribution" tutorial tells the reader how to send out
their patches; the section gained a hint to verify the message
reached the mailing list.
* qj/doc-my1stcontrib-email-verify:
MyFirstContribution: add note on confirming patches
Junio C Hamano [Tue, 4 Nov 2025 15:48:07 +0000 (07:48 -0800)]
Merge branch 'tz/test-prepare-gnupghome'
Tests did not set up GNUPGHOME correctly, which is fixed but some
flaky tests are exposed in t1016, which needs to be addressed
before this topic can move forward.
* tz/test-prepare-gnupghome:
t/lib-gpg: call prepare_gnupghome() in GPG2 prereq
t/lib-gpg: add prepare_gnupghome() to create GNUPGHOME dir
object-file: refactor writing objects via a stream
We have two different ways to write an object into the database:
- We either provide the full buffer and write the object all at once.
- Or we provide an input stream that has a `read()` function so that
we can chunk the object.
The latter is especially used for large objects, where it may be too
expensive to hold the complete object in memory all at once.
While we already have `odb_write_object()` at the ODB-layer, we don't
have an equivalent for streaming an object. Introduce a new function
`odb_write_object_stream()` to address this gap so that callers don't
have to be aware of the inner workings of how to stream an object to
disk with a specific object source.
Rename `stream_loose_object()` to `odb_source_loose_write_stream()` to
clarify its scope. This matches our modern best practices around how to
name functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `write_object_file()` to `odb_source_loose_write_object()` so
that it becomes clear that this is tied to a specific loose object
source. This matches our modern naming schema for functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing an object that already exists in our object database we
skip the write and instead only update mtimes of the object, either in
its packed or loose object format. This logic is wholly contained in
"object-file.c", but that file is really only concerned with loose
objects. So it does not really make sense that it also contains the
logic to freshen a packed object.
Introduce a new `odb_freshen_object()` function that sits on the object
database level and two functions `packfile_store_freshen_object()` and
`odb_source_loose_freshen_object()`. Like this, the format-specific
functions can be part of their respective subsystems, while the backend
agnostic function to freshen an object sits at the object database
layer.
Note that this change also moves the logic that iterates through object
sources from the object source layer into the object database layer.
This change is intentional: object sources should ideally only have to
worry about themselves, and coordination of different sources should be
handled on the object database level.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `has_loose_object()` to `odb_source_loose_has_object()` so that
it becomes clear that this is tied to a specific loose object source.
This matches our modern naming schema for functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: read objects via the loose object source
When reading an object via `loose_object_info()` or `map_loose_object()`
we hand in the whole repository. We then iterate through each of the
object sources to figure out whether that source has the object in
question.
This logic is reversing responsibility though: a specific backend should
only care about one specific source, where the object sources themselves
are then managed by the object database.
Refactor the code accordingly by passing an object source to both of
these functions instead. The different sources are then handled by
either `do_oid_object_info_extended()`, which sits on the object
database level, and by `open_istream_loose()`. The latter function
arguably is still at the wrong level, but this will be cleaned up at a
later point in time.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: move loose object map into loose source
The loose object map is used to map from the repository's canonical
object hash to the compatibility hash. As the name indicates, this map
is only used for loose objects, and as such it is tied to a specific
loose object source.
Same as with preceding commits, move this map into the loose object
source accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: hide internals when we need to reprepare loose sources
There are two different situations where we have to clear the cache of
loose objects:
- When freeing the loose object source itself to avoid memory leaks.
- When repreparing the loose object source so that any potentially-
stale data is getting evicted from the cache.
The former is already handled by `odb_source_loose_free()`. But the
latter case is still done manually by in `odb_reprepare()`, so we are
leaking internals into that code.
Introduce a new `odb_source_loose_reprepare()` function as an equivalent
to `packfile_store_prepare()` to hide these implementation details.
Furthermore, while at it, rename the function `odb_clear_loose_cache()`
to `odb_source_loose_clear()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: move loose object cache into loose source
Our loose objects use a cache that (optionally) stores all objects for
each of the opened sharding directories. This cache is located in the
`struct odb_source`, but now that we have `struct odb_source_loose` it
makes sense to move it into the latter structure so that all state that
relates to loose objects is entirely self-contained.
Do so. While at it, rename corresponding functions to have a prefix that
relates to `struct odb_source_loose`.
Note that despite this prefix, the functions still accept a `struct
odb_source` as input. This is done intentionally: once we introduce
pluggable object databases, we will continue to accept this struct but
then do a cast inside these functions to `struct odb_source_loose`. This
design is similar to how we do it for our ref backends.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, all state that relates to loose objects is held directly by
the `struct odb_source`. Introduce a new `struct odb_source_loose` to
hold the state instead so that it is entirely self-contained.
This structure will eventually morph into the backend for accessing
loose objects. As such, this is part of the refactorings to introduce
pluggable object databases.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `fetch_if_missing` global variable is declared in "object-file.h"
but defined in "odb.c". The variable relates to the whole object
database instead of only loose objects, so move the declaration into
"odb.h" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions `free_object_directory()` and `free_object_directories()`
are responsible for freeing a single object source or all object sources
connected to an object database, respectively. The associated structure
has been renamed from `struct object_directory` to `struct odb_source`
in a1e2581a1e (object-store: rename `object_directory` to `odb_source`,
2025-07-01) though, so the names are somewhat stale nowadays.
Rename them to mention the new struct name instead. Furthermore, while
at it, adapt them to our modern naming schema where we first have the
subject followed by a verb.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: fix subtle logic to check whether an alternate is usable
When adding an alternate to the object database we first check whether
or not the path is usable. A path is usable if:
- It actually exists.
- We don't have it in our object sources yet.
While the former check is trivial enough, the latter part is somewhat
subtle and prone for bugs. This is because the function doesn't only
check whether or not the given path is usable. But if it _is_ usable, we
also store that path in the map of object sources immediately.
The tricky part here is that the path that gets stored in the map is
_not_ copied. Instead, we rely on the fact that subsequent code uses
`strbuf_detach()` to store the exact same allocated memory in the
created object source. Consequently, the memory is owned by the source
but _also_ stored in the map. This subtlety is easy to miss, so if one
decides to refactor this code one can easily end up breaking this
mechanism.
Make the relationship more explicit by not storing the path as part of
`alt_odb_usable()`. Instead, store the path after we have created the
source so that we can use the source's path pointer directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Toon Claes [Thu, 23 Oct 2025 07:50:14 +0000 (09:50 +0200)]
last-modified: implement faster algorithm
The current implementation of git-last-modified(1) works by doing a
revision walk, and inspecting the diff at each level of that walk to
annotate entries remaining in the hashmap of paths. In other words, if
the diff at some level touches a path which has not yet been associated
with a commit, then that commit becomes associated with the path.
While a perfectly reasonable implementation, it can perform poorly in
either one of two scenarios:
1. There are many entries of interest, in which case there is simply
a lot of work to do.
2. Or, there are (even a few) entries which have not been updated in a
long time, and so we must walk through a lot of history in order to
find a commit that touches that path.
This patch rewrites the last-modified implementation that addresses the
second point. The idea behind the algorithm is to propagate a set of
'active' paths (a path is 'active' if it does not yet belong to a
commit) up to parents and do a truncated revision walk.
The walk is truncated because it does not produce a revision for every
change in the original pathspec, but rather only for active paths.
More specifically, consider a priority queue of commits sorted by
generation number. First, enqueue the set of boundary commits with all
paths in the original spec marked as interesting.
Then, while the queue is not empty, do the following:
1. Pop an element, say, 'c', off of the queue, making sure that 'c'
isn't reachable by anything in the '--not' set.
2. For each parent 'p' (with index 'parent_i') of 'c', do the
following:
a. Compute the diff between 'c' and 'p'.
b. Pass any active paths that are TREESAME from 'c' to 'p'.
c. If 'p' has any active paths, push it onto the queue.
3. Any path that remains active on 'c' is associated to that commit.
This ends up being equivalent to doing something like 'git log -1 --
$path' for each path simultaneously. But, it allows us to go much faster
than the original implementation by limiting the number of diffs we
compute, since we can avoid parts of history that would have been
considered by the revision walk in the original implementation, but are
known to be uninteresting to us because we have already marked all paths
in that area to be inactive.
To avoid computing many first-parent diffs, add another trick on top of
this and check if all paths active in 'c' are DEFINITELY NOT in c's
Bloom filter. Since the commit-graph only stores first-parent diffs in
the Bloom filters, we can only apply this trick to first-parent diffs.
Comparing the performance of this new algorithm shows about a 2.5x
improvement on git.git:
Benchmark 1: master no bloom
Time (mean ± σ): 2.868 s ± 0.023 s [User: 2.811 s, System: 0.051 s]
Range (min … max): 2.847 s … 2.926 s 10 runs
Benchmark 2: master with bloom
Time (mean ± σ): 949.9 ms ± 15.2 ms [User: 907.6 ms, System: 39.5 ms]
Range (min … max): 933.3 ms … 971.2 ms 10 runs
Benchmark 3: HEAD no bloom
Time (mean ± σ): 782.0 ms ± 6.3 ms [User: 740.7 ms, System: 39.2 ms]
Range (min … max): 776.4 ms … 798.2 ms 10 runs
Benchmark 4: HEAD with bloom
Time (mean ± σ): 307.1 ms ± 1.7 ms [User: 276.4 ms, System: 29.9 ms]
Range (min … max): 303.7 ms … 309.5 ms 10 runs
Summary
HEAD with bloom ran
2.55 ± 0.02 times faster than HEAD no bloom
3.09 ± 0.05 times faster than master with bloom
9.34 ± 0.09 times faster than master no bloom
In short, the existing implementation is comparably fast *with* Bloom
filters as the new implementation is *without* Bloom filters. So, most
repositories should get a dramatic speed-up by just deploying this (even
without computing Bloom filters), and all repositories should get faster
still when computing Bloom filters.
When comparing a more extreme example of
`git last-modified -- COPYING t`, the difference is even 5 times better:
Benchmark 1: master
Time (mean ± σ): 4.372 s ± 0.057 s [User: 4.286 s, System: 0.062 s]
Range (min … max): 4.308 s … 4.509 s 10 runs
Benchmark 2: HEAD
Time (mean ± σ): 826.3 ms ± 22.3 ms [User: 784.1 ms, System: 39.2 ms]
Range (min … max): 810.6 ms … 881.2 ms 10 runs
Summary
HEAD ran
5.29 ± 0.16 times faster than master
As an added benefit, results are more consistent now. For example
implementation in 'master' gives:
With the changes in this patch the results of git-last-modified(1)
always match those of `git log --max-count=1`.
One thing to note though, the results might be outputted in a different
order than before. This is not considerd to be an issue because nowhere
is documented the order is guaranteed.
Based-on-patches-by: Derrick Stolee <stolee@gmail.com> Based-on-patches-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Toon Claes <toon@iotcl.com> Acked-by: Taylor Blau <me@ttaylorr.com>
[jc: tweaked use of xcalloc() to unbreak coccicheck] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 3 Nov 2025 14:49:55 +0000 (06:49 -0800)]
Merge branch 'jk/diff-patch-dry-run-cleanup'
Finishing touches to fixes to the recent regression in "git diff -w
--quiet" and anything that needs to internally generate patch to
see if it turns empty.
* jk/diff-patch-dry-run-cleanup:
diff: simplify run_external_diff() quiet logic
diff: drop dry-run redirection to /dev/null
diff: replace diff_options.dry_run flag with NULL file
diff: drop save/restore of color_moved in dry-run mode
diff: send external diff output to diff_options.file
Junio C Hamano [Mon, 3 Nov 2025 14:49:55 +0000 (06:49 -0800)]
Merge branch 'ps/maintenance-geometric'
"git maintenance" command learns the "geometric" strategy where it
avoids doing maintenance tasks that rebuilds everything from
scratch.
* ps/maintenance-geometric:
t7900: fix a flaky test due to git-repack always regenerating MIDX
builtin/maintenance: introduce "geometric" strategy
builtin/maintenance: make "gc" strategy accessible
builtin/maintenance: extend "maintenance.strategy" to manual maintenance
builtin/maintenance: run maintenance tasks depending on type
builtin/maintenance: improve readability of strategies
builtin/maintenance: don't silently ignore invalid strategy
builtin/maintenance: make the geometric factor configurable
builtin/maintenance: introduce "geometric-repack" task
builtin/gc: make `too_many_loose_objects()` reusable without GC config
builtin/gc: remove global `repack` variable
Junio C Hamano [Mon, 3 Nov 2025 14:49:54 +0000 (06:49 -0800)]
Merge branch 'rs/add-patch-quit'
The 'q'(uit) command in "git add -p" has been improved to quit
without doing any meaningless work before leaving, and giving EOF
(typically control-D) to the prompt is made to behave the same way.
* rs/add-patch-quit:
add-patch: quit on EOF
add-patch: quit without skipping undecided hunks
Junio C Hamano [Thu, 30 Oct 2025 15:00:20 +0000 (08:00 -0700)]
Merge branch 'kf/log-shortlog-completion-fix'
"git shortlog" knows "--committer" and "--author" options, which
the command line completion (in contrib/) did not handle well,
which has been corrected.
* kf/log-shortlog-completion-fix:
completion: complete some 'git log' options
Junio C Hamano [Thu, 30 Oct 2025 15:00:19 +0000 (08:00 -0700)]
Merge branch 'ps/remove-packfile-store-get-packs'
Two slightly different ways to get at "all the packfiles" in API
has been cleaned up.
* ps/remove-packfile-store-get-packs:
packfile: rename `packfile_store_get_all_packs()`
packfile: introduce macro to iterate through packs
packfile: drop `packfile_store_get_packs()`
builtin/grep: simplify how we preload packs
builtin/gc: convert to use `packfile_store_get_all_packs()`
object-name: convert to use `packfile_store_get_all_packs()`
Christian Couder [Thu, 30 Oct 2025 12:33:32 +0000 (13:33 +0100)]
gpg-interface: mark a string for translation
Previous commits have marked a number of error or warning messages in
"builtin/fast-export.c" and "builtin/fast-import.c" for translation.
As "gpg-interface.c" code is used by the fast-export and fast-import
code, we should make sure that error or warning messages are also all
marked for translation in "gpg-interface.c".
To ensure that, let's mark for translation an error message in a
die() function.
With this, all the error and warning messages emitted by fast-export
and fast-import can be properly translated.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 30 Oct 2025 12:33:31 +0000 (13:33 +0100)]
fast-import: mark strings for translation
Some error or warning messages in "builtin/fast-import.c" are marked
for translation, but many are not.
To be more consistent and provide a better experience to people using a
translated version, let's mark all the remaining error or warning
messages for translation.
While at it, let's make the following small changes:
- replace "GIT" or "git" in a few error messages to just "Git",
- replace "Expected from command, got %s" to "expected 'from'
command, got '%s'", which makes it clearer that "from" is a command
and should not be translated,
- downcase error and warning messages that start with an uppercase,
- fix test cases in "t9300-fast-import.sh" that broke because an
error or warning message was downcased,
- split error and warning messages that are too long,
- adjust the indentation of some arguments of the error functions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 30 Oct 2025 12:33:30 +0000 (13:33 +0100)]
fast-export: mark strings for translation
Some error or warning messages in "builtin/fast-export.c" are marked
for translation, but many are not.
To be more consistent and provide a better experience to people using a
translated version, let's mark all the remaining error or warning
messages for translation.
While at it:
- improve how some arguments to some error functions are indented,
- remove "Error:" at the start of an error message,
- downcase error and warning messages that start with an uppercase.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 30 Oct 2025 12:33:29 +0000 (13:33 +0100)]
gpg-interface: use left shift to define GPG_VERIFY_*
In "gpg-interface.h", the definitions of the GPG_VERIFY_* boolean flags
are currently using 1, 2 and 4 while we often prefer the bitwise left
shift operator, `<<`, for that purpose to make it clearer that they are
boolean.
Let's use the left shift operator here too. Let's also fix an indent
issue with "4" while at it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
