Jiri Denemark [Tue, 10 May 2022 13:20:25 +0000 (15:20 +0200)]
qemu: Explicitly emit events on post-copy failure
The events would normally be triggered only if we're changing domain
state. But most of the time the domain is already in the right state and
we're just changing its substate from {PAUSED,RUNNING}_POSTCOPY to
*_POSTCOPY_FAILED. Let's emit lifecycle events explicitly when post-copy
migration fails to make the failure visible without polling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jiri Denemark [Tue, 10 May 2022 13:20:25 +0000 (15:20 +0200)]
qemu: Keep domain running on dst on failed post-copy migration
There's no need to artificially pause a domain when post-copy fails
from our point of view unless QEMU connection is broken too as migration
may still be progressing well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jiri Denemark [Tue, 10 May 2022 13:20:25 +0000 (15:20 +0200)]
Introduce VIR_DOMAIN_RUNNING_POSTCOPY_FAILED
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 6 Jun 2022 08:10:44 +0000 (10:10 +0200)]
qemu: Fix crash in qemuBuildDeviceCommandlineHandleOverrides
'STREQ' is used to compare the override alias with the device alias.
While the parser ensures that the override alias is non-NULL, the device
alias may be NULL and STREQ doesn't handle that.
Fixes: 38ab5c9ead5
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/321 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 3 Jun 2022 13:49:01 +0000 (15:49 +0200)]
qemu: fd: Fix monitor usage of qemuFDPassDirectGetPath
We need to use the 'name' variable and just overwrite it with the FD
number when FDs are passed on the monitor. Otherwise we will read NULL
path if the FD is accessed before being passed on the monitor. The idea
of this helper is to simplify the monitor code so it would be
counterproductive to have other behaviour.
Fixes the following symptom:
$ virsh attach-interface cd network default --model virtio
error: Failed to attach interface
error: internal error: unable to execute QEMU command 'netdev_add': File descriptor named '(null)' has not been found
Fixes: bca9047906fd73fd30f275dd45b64998fbbcf6de
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/318
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2092856 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu: Restore label to temp file in qemuDomainScreenshot()
Obtaining a screenshot via virDomainScreenshot() works like this:
1) we create a temp file, label it, then
2) tell QEMU to store the screenshot into it, and
3) finally, open the file for transfer via virStream
Since the file is just temporary and even explicitly unlinked at
the end, no seclabel restoration is done. This makes perfect
sense for security models which attach a label to file itself
(DAC, SELinux) because the label is gone with the file. However,
for models where a list of files and allowed actions is kept on a
side (AppArmor) this approach means we just append files into the
profile and never remove them. In turn, the file grows and policy
update takes longer with each entry.
Restore the seclabel for AppArmor's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Sun, 23 Jan 2022 11:10:35 +0000 (12:10 +0100)]
virStorageSourceGetActualType: Change type of retval
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Michal Privoznik [Sun, 23 Jan 2022 11:04:44 +0000 (12:04 +0100)]
Drop needless typecast to virStorageType enum
There are three places (two in domain_conf.c and one in
qemu_migration.c) where a virStorageSource->type is typecasted to
virStorageType (for the purpose of catching missing enum member
in a switch() statement at compile time). This is needless,
because as of v8.2.0-rc1~120 the struct member is of proper type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Peter Krempa [Mon, 23 May 2022 11:48:31 +0000 (13:48 +0200)]
docs: domain: Remove extraneous quotes
Certain documentation bits tried to put a reference of a value into
quotes, but that's not needed for both the pure view of the rST source
and the rendered output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virNetMessageEncodePayloadRaw' is not supposed to be called with 'NULL'
data, but the code path from 'virNetClientStreamSendPacket' does so.
Now 'virNetMessageEncodePayloadEmpty' is intended for such case, but
since it's just a sub-set of steps from 'virNetMessageEncodePayloadRaw'
it's more straightforward to add NULL-tolerance to 'virNetMessageEncodePayloadRaw'
and subsequently remove 'virNetMessageEncodePayloadEmpty'.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/308 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 4 May 2022 15:23:56 +0000 (17:23 +0200)]
glibcompat: Provide proper override for 'g_hash_table_steal_extended'
We've emulated the function in virHashSteal, with a note pointing to use
the proper version. Move the code to glibcomapt.c and make it such that
builds using newer glib already use the new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 31 May 2022 13:15:57 +0000 (15:15 +0200)]
docs: Add HTML reference checker
In many cases we move around or rename internal anchors which may break
links leading to the content.
docutils handle the case of links inside a document, but we are lacking
the same form of checking between documents.
Introduce a script which cross-checks all the anchors and links in HTML
output files and prints problems and use it as a test case for the
'docs' directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 31 May 2022 13:07:33 +0000 (15:07 +0200)]
docs: rpc: Fix broken headings
Remove what seems like links from some headings. This error predates the
conversion to RST where an '<a href' was used instead of '<a id' in the
source document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 30 May 2022 10:56:39 +0000 (12:56 +0200)]
docs: formatdomain: Remove the 'anchor' role
The role was used to pass through raw HTML to define custom anchor
names. Since all of the document was now converted to use the anchors
generated from headers we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
virt-host-validate: Improve failure message when no HW virt is found
Make sure that more users understand that without HW virtualization you cannot
have KVM working.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2086677 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already allow users to provide TFTP root path in network XML
and not specify any DHCP. This makes sense, because dnsmasq is
not only DHCP server but also TFTP server and users might have
a DHCP server configured on their own, outside of libvirt's
control and want just the TFTP part.
By moving TFTP config generator out of DHCP generator and calling
it for every IPv4 range, users can finally enable just TFTP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026765 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
network: Separate DHCP config generator into a function
Generating configuration file for dnsmasq is done in
networkDnsmasqConfContents() which is this big, self-contained
function. Separate at least DHCP part into its own function for
better readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
projects / thirdparty / libvirt.git / log
