It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250801175423.2970334-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf/core: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should call put_receive_buffer() before waking up the callers.
For the internal error case of response->type being unexpected,
we now also call smbd_disconnect_rdma_connection() instead
of not waking up the callers at all.
Note that the SMBD_TRANSFER_DATA case still has problems,
which will be addressed in the next commit in order to make
it easier to review this one.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling enqueue_reassembly() and wake_up_interruptible(&t->wait_reassembly_queue)
or put_receive_buffer() means the recvmsg/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We should call put_recvmsg() before smb_direct_disconnect_rdma_connection()
in order to call it before waking up the callers.
In all error cases we should call smb_direct_disconnect_rdma_connection()
in order to avoid stale connections.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
When gso_segs is left at 0, a number of assumptions will end up being
incorrect throughout the stack.
For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs.
So, if a non-LRO'ed packet followed by an LRO'ed packet is being
processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and
the next one to 0 (in dev_gro_receive()).
Since commit 531d0d32de3e
("net/mlx5: Correctly set gso_size when LRO is used")
these packets will get merged (as their gso_size now matches).
So, we end up in gro_complete() with NAPI_GRO_CB()->count == 1 and thus
don't call inet_gro_complete(). Meaning, checksum-validation in
tcp_checksum_complete() will fail with a "hw csum failure".
Even before the above mentioned commit, incorrect gso_segs means that other
things like TCP's accounting of incoming packets (tp->segs_in,
data_segs_in, rcv_ooopack) will be incorrect. Which means that if one
does bytes_received/data_segs_in, the result will be bigger than the
MTU.
Fix this by initializing gso_segs correctly when LRO is used.
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Reported-by: Gal Pressman <gal@nvidia.com> Closes: https://lore.kernel.org/netdev/6583783f-f0fb-4fb1-a415-feec8155bc69@nvidia.com/ Signed-off-by: Christoph Paasch <cpaasch@openai.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250729-mlx5_gso_segs-v1-1-b48c480c1c12@openai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
If the NFS client is doing writeback from a workqueue context, avoid using
__GFP_NORETRY for allocations if the task has set PF_MEMALLOC_NOIO or
PF_MEMALLOC_NOFS. The combination of these flags makes memory allocation
failures much more likely.
We've seen those allocation failures show up when the loopback driver is
doing writeback from a workqueue to a file on NFS, where memory allocation
failure results in errors or corruption within the loopback device's
filesystem.
Currently, when the server supports NFS4.1 security labels then
security.selinux label in included twice. Instead, only add it
when the server doesn't possess security label support.
There are common patterns in the kernel of using test_and_clear_bit()
before wake_up_bit(), and atomic_dec_and_test() before wake_up_var().
These combinations don't need extra barriers but sometimes include them
unnecessarily.
To help avoid the unnecessary barriers and to help discourage the
general use of wake_up_bit/var (which is a fragile interface) introduce
two combined functions which implement these patterns.
Also add store_release_wake_up() which supports the task of simply
setting a non-atomic variable and sending a wakeup. This pattern
requires barriers which are often omitted.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240925053405.3960701-5-neilb@suse.de
Stable-dep-of: 1db3a48e83bb ("NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()") Signed-off-by: Sasha Levin <sashal@kernel.org>
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de Fixes: 260f32adb88d ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") enabled libata EH to manage device power mode
trasitions for system suspend/resume and removed the flag from
ata_scsi_dev_config. However, since the sd_shutdown() function still
relies on the manage_system_start_stop flag, a spin-down command is not
issued to the disk with command "echo 1 > /sys/block/sdb/device/delete"
sd_shutdown() can be called for both system/runtime start stop
operations, so utilize the manage_run_time_start_stop flag set in the
ata_scsi_dev_config and issue a spin-down command during disk removal
when the system is running. This is in addition to when the system is
powering off and manage_shutdown flag is set. The
manage_system_start_stop flag will still be used for drivers that still
set the flag.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com Tested-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
In the below noted Fixes commit we introduced a reflck mutex to allow
better scaling between devices for open and close. The reflck was
based on the hot reset granularity, device level for root bus devices
which cannot support hot reset or bus/slot reset otherwise. Overlooked
in this were SR-IOV VFs, where there's also no bus reset option, but
the default for a non-root-bus, non-slot-based device is bus level
reflck granularity.
The reflck mutex has since become the dev_set mutex (via commit 2cd8b14aaa66 ("vfio/pci: Move to the device set infrastructure")) and
is our defacto serialization for various operations and ioctls. It
still seems to be the case though that sets of vfio-pci devices really
only need serialization relative to hot resets affecting the entire
set, which is not relevant to SR-IOV VFs. As described in the Closes
link below, this serialization contributes to startup latency when
multiple VFs sharing the same "bus" are opened concurrently.
Mark the device itself as the basis of the dev_set for SR-IOV VFs.
Reported-by: Aaron Lewis <aaronlewis@google.com> Closes: https://lore.kernel.org/all/20250626180424.632628-1-aaronlewis@google.com Tested-by: Aaron Lewis <aaronlewis@google.com> Fixes: e309df5b0c9e ("vfio/pci: Parallelize device open and release") Reviewed-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250626225623.1180952-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In lfs mode, dirty data needs OPU, we'd better calculate lower_p and
upper_p w/ them during has_not_enough_free_secs(), otherwise we may
encounter out-of-space issue due to we missed to reclaim enough
free section w/ foreground gc.
When testing F2FS with xfstests using UFS backed virtual disks the
kernel complains sometimes that f2fs_release_decomp_mem() calls
vm_unmap_ram() from an invalid context. Example trace from
f2fs/007 test:
This patch modifies in_task() check inside f2fs_read_end_io() to also
check if interrupts are disabled. This ensures that pages are unmapped
asynchronously in an interrupt handler.
Fixes: bff139b49d9f ("f2fs: handle decompress only post processing in softirq") Signed-off-by: Jan Prusakowski <jprusakowski@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
The buggy address belongs to the object at ffff88812d961f20
which belongs to the cache f2fs_inode_cache of size 1200
The buggy address is located 856 bytes inside of
1200-byte region [ffff88812d961f20, ffff88812d9623d0)
This bug can be reproduced w/ the reproducer [2], once we enable
CONFIG_F2FS_CHECK_FS config, the reproducer will trigger panic as below,
so the direct reason of this bug is the same as the one below patch [3]
fixed.
The root cause is: in the fuzzed image, dnode #8 belongs to inode #7,
after inode #7 eviction, dnode #8 was dropped.
However there is dirent that has ino #8, so, once we unlink file3, in
f2fs_evict_inode(), both f2fs_truncate() and f2fs_update_inode_page()
will fail due to we can not load node #8, result in we missed to call
f2fs_inode_synced() to clear inode dirty status.
Let's fix this by calling f2fs_inode_synced() in error path of
f2fs_evict_inode().
PS: As I verified, the reproducer [2] can trigger this bug in v6.1.129,
but it failed in v6.16-rc4, this is because the testcase will stop due to
other corruption has been detected by f2fs:
F2FS-fs (loop0): inconsistent node block, node_type:2, nid:8, node_footer[nid:8,ino:8,ofs:0,cpver:5013063228981249506,blkaddr:15366]
F2FS-fs (loop0): f2fs_lookup: inode (ino=9) has zero i_nlink
Fixes: 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/x/report.txt?x=13448368580000 Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff888100567dc8 by task kworker/u4:0/8
The buggy address belongs to the object at ffff888100567a10
which belongs to the cache f2fs_inode_cache of size 1360
The buggy address is located 952 bytes inside of
1360-byte region [ffff888100567a10, ffff888100567f60)
The root cause is w/ a fuzzed image, f2fs may missed to clear FI_DIRTY_INODE
flag for target inode, after f2fs_evict_inode(), the inode is still linked in
sbi->inode_list[DIRTY_META] global list, once it triggers checkpoint,
f2fs_sync_inode_meta() may access the released inode.
In f2fs_evict_inode(), let's always call f2fs_inode_synced() to clear
FI_DIRTY_INODE flag and drop inode from global dirty list to avoid this
UAF issue.
Fixes: 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/bug?extid=849174b2efaf0d8be6ba Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
KMSAN reported a use of uninitialized value in `__is_extent_mergeable()`
and `__is_back_mergeable()` via the read extent tree path.
The root cause is that `get_read_extent_info()` only initializes three
fields (`fofs`, `blk`, `len`) of `struct extent_info`, leaving the
remaining fields uninitialized. This leads to undefined behavior
when those fields are accessed later, especially during
extent merging.
Fix it by zero-initializing the `extent_info` struct before population.
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab6048b7 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com Fixes: f9c82a4ea89c ("Increase size of ucounts to atomic_long_t") Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: MengEn Sun <mengensun@tencent.com> Cc: "Thomas Weißschuh" <linux@weissschuh.net> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d22525 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f17 ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c33.
Fixes: 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Daniel Gomez <da.gomez@samsung.com> Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a
comment in the declaration of struct match_workbuf stating it is and a
modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump
WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2
line to ensure that any future changes to the value of WB_HISTORY_SIZE
respect this requirement.
Fixes: 136db994852a ("apparmor: increase left match history buffer size") Signed-off-by: Ryan Lee <ryan.lee@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
flow_dissector_is_valid_access doesn't check that the context access is
aligned. As a consequence, an unaligned access within one of the exposed
field is considered valid and later rejected by
flow_dissector_convert_ctx_access when we try to convert it.
The later rejection is problematic because it's reported as a verifier
bug with a kernel warning and doesn't point to the right instruction in
verifier logs.
As part of the normal initiator side scanning the guest's scsi layer
will loop over all possible targets and send an inquiry. Since the
max number of targets for virtio-scsi is 256, this can result in 255
error messages about targets not existing if you only have a single
target. When there's more than 1 vhost-scsi device each with a single
target, then you get N * 255 log messages.
It looks like the log message was added by accident in:
commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from
control queue handler")
when we added common helpers. Then in:
commit 09d7583294aa ("vhost/scsi: Use common handling code in request
queue handler")
we converted the scsi command processing path to use the new
helpers so we started to see the extra log messages during scanning.
The patches were just making some code common but added the vq_err
call and I'm guessing the patch author forgot to enable the vq_err
call (vq_err is implemented by pr_debug which defaults to off). So
this patch removes the call since it's expected to hit this path
during device discovery.
Fixes: 09d7583294aa ("vhost/scsi: Use common handling code in request queue handler") Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250611210113.10912-1-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In dbAllocCtl(), read_metapage() increases the reference count of the
metapage. However, when dp->tree.budmin < 0, the function returns -EIO
without calling release_metapage() to decrease the reference count,
leading to a memory leak.
Add release_metapage(mp) before the error return to properly manage
the metapage reference count and prevent the leak.
Fixes: a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d ("jfs: fix shift-out-of-bounds in dbSplit") Signed-off-by: Zheng Yu <zheng.yu@northwestern.edu> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/sh/Makefile defines and exports ld-bfd to be used by
arch/sh/boot/compressed/Makefile and arch/sh/boot/romimage/Makefile.
However some shells, including dash, will not pass through environment
variables whose name includes a hyphen. Usually GNU make does not use
a shell to recurse, but if e.g. $(srctree) contains '~' it will use a
shell here.
Other instances of this problem were previously fixed by commits 2bfbe7881ee0 "kbuild: Do not use hyphen in exported variable name"
and 82977af93a0d "sh: rename suffix-y to suffix_y".
Rename the variable to ld_bfd.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0 Fixes: 7b022d07a0fd ("sh: Tidy up the ldscript output format specifier.") Signed-off-by: Ben Hutchings <benh@debian.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The do_k_string() and do_c_string() functions do essentially the same
thing which is they add a string and a comma onto the end of an existing
string. At the end, the caller will overwrite the last comma with a
newline. Later, in orangefs_kernel_debug_init(), we add a newline to
the string.
The change to do_k_string() is just cosmetic. I moved the "- 1" to
the other side of the comparison and made it "+ 1". This has no
effect on runtime, I just wanted the functions to match each other
and the rest of the file.
However in do_c_string(), I removed the "- 2" which allows us to print
two extra characters. I noticed this issue while reviewing the code
and I doubt affects anything in real life. My guess is that this was
double counting the comma and the newline. The "+ 1" accounts for
the newline, and the caller will delete the final comma which ensures
there is enough space for the newline.
Removing the "- 2" lets us print 2 more characters, but mainly it makes
the code more consistent and understandable for reviewers.
Fixes: 44f4641073f1 ("orangefs: clean up debugfs globals") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
__iomem attribute is supposed to be used only with variables holding the
MMIO pointer. But here, 'mw_addr' variable is just holding a 'void *'
returned by pci_epf_alloc_space(). So annotating it with __iomem is clearly
wrong. Hence, drop the attribute.
This also fixes the below sparse warning:
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: expected void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: got void *
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: expected unsigned int [usertype] *epf_db
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: got void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: warning: incorrect type in argument 2 (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: expected void *addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: got void [noderef] __iomem *mw_addr
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250709125022.22524-1-mani@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The bus->params should be restored if the stream is failed to prepare.
The issue exists since beginning. The Fixes tag just indicates the
first commit that the commit can be applied to.
The "rec->len" value comes from the firmware. We generally do
trust firmware, but it's always better to double check. If
the length value is too large it would lead to memory corruption
when we set "data[i] = ret;"
Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner.
Link: https://lkml.kernel.org/r/20250607021353.1127963-1-wangzijie1@honor.com Fixes: 3f61631d47f1 ("take care to handle NULL ->proc_lseek()") Signed-off-by: wangzijie <wangzijie1@honor.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X.
Fixes: 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information") Signed-off-by: Mengbiao Xiong <xisme1998@gmail.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2e5 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0c96f552 ("perf sched: Finish latency => atom rename and misc cleanups") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fpfd_max frequency should be set to 450 MHz instead of 300 MHz.
Well, it actually depends on the platform speed grade but we are being
conservative for ultrascale so let's be consistent. In a following
change we will set these limits at runtime.
In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize
the pinctrl_map array, the function returns -ENOMEM directly
without freeing the previously allocated *map buffer. This results
in a memory leak of the original kmalloc_array allocation.
According the function documentation of epf_ntb_init_epc_bar(), the
function should return an error code on error. However, it returns -1 when
no BAR is available i.e., when pci_epc_get_next_free_bar() fails.
Return -ENOENT instead.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: changed err code to -ENOENT] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-1-fc685a22ad28@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
I get a very rare -Wstringop-overread warning with gcc-15 for one function
in aesbs_ctr_encrypt():
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:212:1446: error: '__builtin_memcpy' offset [17, 2147483647] is out of the bounds [0, 16] of object 'buf' with type 'u8[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds=]
212 | src = dst = memcpy(buf + sizeof(buf) - bytes,
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:218:17: error: 'aesbs_ctr_encrypt' reading 1 byte from a region of size 0 [-Werror=stringop-overread]
218 | aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 2 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 3 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 6 of type 'u8[0]' {aka 'unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:36:17: note: in a call to function 'aesbs_ctr_encrypt'
36 | asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
This could happen in theory if walk.nbytes is larger than INT_MAX and gets
converted to a negative local variable.
Keep the type unsigned like the orignal nbytes to be sure there is no
integer overflow.
Fixes: c8bf850e991a ("crypto: arm/aes-neonbs-ctr - deal with non-multiples of AES block size") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs") Signed-off-by: Charles Han <hanchunchao@inspur.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953c1 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503df0 ("media: controls: Validate H264 stateless controls") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated.
Fixes: c6ed4d734bc7 ("clk: davinci: New driver for davinci PSC clocks") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://lore.kernel.org/r/20250401131341.26800-1-bsdhenrymartin@gmail.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The expression '1 << EraseUnitSize' is evaluated in int, which causes
a negative result when shifting by 31 - the upper bound of the valid
range [10, 31], enforced by scan_header(). This leads to incorrect
extension when storing the result in 'erase->len' (uint64_t), producing
a large unexpected value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
projects / thirdparty / kernel / stable.git / log
