renlin [Wed, 21 Nov 2018 14:29:19 +0000 (14:29 +0000)]
[PATCH][PR84877]Dynamically align the address for local parameter copy on the stack when required alignment is larger than MAX_SUPPORTED_STACK_ALIGNMENT
As described in PR84877. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84877
The local copy of parameter on stack is not aligned.
For BLKmode paramters, a local copy on the stack will be saved.
There are three cases:
1) arguments passed partially on the stack, partially via registers.
2) arguments passed fully on the stack.
3) arguments passed via registers.
After the change here, in all three cases, the stack slot for the local
parameter copy is aligned by the data type.
The stack slot is the DECL_RTL of the parameter. All the references thereafter
in the function will refer to this RTL.
To populate the local copy on the stack,
For case 1) and 2), there are operations to move data from the caller's stack
(from incoming rtl) into callee's stack.
For case 3), the registers are directly saved into the stack slot.
In all cases, the destination address is properly aligned.
But for case 1) and case 2), the source address is not aligned by the type.
It is defined by the PCS how the arguments are prepared.
The block move operation is fulfilled by emit_block_move (). As far as I can see,
it will use the smaller alignment of source and destination.
This looks fine as long as we don't use instructions which requires a strict
larger alignment than the address actually has.
Here, it only changes receiving parameters.
The function assign_stack_local_1 will be called in various places.
Usually, the caller will constraint the ALIGN parameter.
For example via STACK_SLOT_ALIGNMENT macro.
assign_parm_setup_block will call assign_stack_local () with alignment from the
parameter type which in this case could be
larger than MAX_SUPPORTED_STACK_ALIGNMENT.
The alignment operation for parameter copy on the stack is similar to stack vars.
First, enough space is reserved on the stack. The size is fixed at compile time.
Instructions are emitted to dynamically get an aligned address at runtime
within this piece of memory.
This will unavoidably increase the usage of stack. However, it really depends on
how many over-aligned parameters are passed by value.
gcc/
2018-11-21 Renlin Li <renlin.li@arm.com>
PR middle-end/84877
* explow.h (get_dynamic_stack_size): Declare it as external.
* explow.c (record_new_stack_level): Remove function static attribute.
* function.c (assign_stack_local_1): Dynamically align the stack slot
addr for parameter copy on the stack.
jakub [Wed, 21 Nov 2018 10:45:58 +0000 (10:45 +0000)]
PR rtl-optimization/87817
* config/i386/i386.md (bmi2_bzhi_<mode>3, *bmi2_bzhi_<mode>3,
*bmi2_bzhi_<mode>3_1, *bmi2_bzhi_<mode>3_1_ccz): Use IF_THEN_ELSE
in the pattern to avoid triggering UB when operands[2] is zero.
(tbm_bextri_<mode>): New expander. Renamed the old define_insn to ...
(*tbm_bextri_<mode>): ... this.
jakub [Wed, 21 Nov 2018 08:07:51 +0000 (08:07 +0000)]
* lang.opt (fdec-include): New option.
* options.c (set_dec_flags): Set also flag_dec_include.
* scanner.c (include_line): Change return type from bool to int.
In fixed form allow spaces in between include keyword letters.
For -fdec-include, allow in fixed form 0 in column 6. With
-fdec-include return -1 if the parsed line is not full include
statement and it could be successfully completed on continuation
lines.
(include_stmt): New function.
(load_file): Adjust include_line caller. If it returns -1, keep
trying include_stmt until it stops returning -1 whenever adding
further line of input.
* gfortran.dg/include_10.f: New test.
* gfortran.dg/include_10.inc: New file.
* gfortran.dg/include_11.f: New test.
* gfortran.dg/include_12.f: New test.
* gfortran.dg/include_13.f90: New test.
* gfortran.dg/gomp/include_1.f: New test.
* gfortran.dg/gomp/include_1.inc: New file.
* gfortran.dg/gomp/include_2.f90: New test.
krebbel [Wed, 21 Nov 2018 07:48:49 +0000 (07:48 +0000)]
S/390: Support vector load/store alignment hints
The IBM z14 POP adds an optional alignment operand to the vl, vst,
vlm, and vstm instruction (vector loads and stores). Vectors residing
on 8 or 16 byte boundaries might get loaded or stored faster on some
models given the instruction uses the proper hint operand. A wrong
hint will hurt performance though.
The attached testcase align-1 currently fails due to:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88085
gcc/ChangeLog:
2018-11-21 Andreas Krebbel <krebbel@linux.ibm.com>
* configure.ac: Add check for Binutils to determine whether vector
load/store alignments hints are being supported.
* config.in: Regenerate.
* configure: Regenerate.
* config/s390/s390.c (print_operand): Support new output
modifier A.
* config/s390/s390.md ("movti"): Append alignment hint output
using the new output modifier 'A'.
* config/s390/vector.md ("mov<mode>", "*vec_tf_to_v1tf")
("*vec_ti_to_v1ti"): Likewise.
gcc/testsuite/ChangeLog:
2018-11-21 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.target/s390/vector/align-1.c: New test.
* gcc.target/s390/vector/align-2.c: New test.
* c-c++-common/builtin-has-attribute-2.c: New test.
* c-c++-common/builtin-has-attribute-3.c: New test.
* c-c++-common/builtin-has-attribute-4.c: New test.
* c-c++-common/builtin-has-attribute.c: New test.
* gcc.dg/builtin-has-attribute.c: New test.
* gcc/testsuite/gcc.target/i386/builtin-has-attribute.c: New test.
hubicka [Wed, 21 Nov 2018 02:38:43 +0000 (02:38 +0000)]
PR lto/84044
* ipa-devirt.c (odr_types_equivalent_p): Use operand_equal_p to
compare ENUM values.
* g++.dg/lto/odr-4_0.C: New testcase.
* g++.dg/lto/odr-4_1.C: New testcase.
jakub [Tue, 20 Nov 2018 20:44:38 +0000 (20:44 +0000)]
PR tree-optimization/87895
* omp-simd-clone.c (ipa_simd_modify_function_body): When removing
or replacing GIMPLE_RETURN, set EDGE_FALLTHRU on the edge to EXIT.
(simd_clone_adjust): Don't set EDGE_FALLTHRU here. In a loop that
redirects edges to EXIT to edges to incr_bb, iterate while EXIT
has any preds and always use EDGE_PRED (, 0).
* gcc.dg/gomp/pr87895-1.c: New test.
* gcc.dg/gomp/pr87895-2.c: New test.
* gcc.dg/gomp/pr87895-3.c: New test.
hubicka [Tue, 20 Nov 2018 16:22:19 +0000 (16:22 +0000)]
PR lto/87957
* ipa-devirt.c (odr_subtypes_equivalent_p): Report ODR violation
when sybtype already violates ODR.
(get_odr_type): Do not ICE when insert is false and type duplicate
is not registered yet.
(register_odr_type): Be sure to register subtypes first.
krebbel [Tue, 20 Nov 2018 16:19:54 +0000 (16:19 +0000)]
S/390: Fix flogr RTX.
The flogr instruction uses a 64 bit register pair target operand. In
the RTX we model this as a write to a TImode register. Unfortunately
the RTX's being assigned to the two parts of the target operand were
swapped. This is no problem if in the end the flogr instruction will
be emitted since the instruction still does what the clzdi expander
expects. However, a problem arises when the RTX is used to optimize
CLZ for a constant input operand. Even then it matters only if the
expression couldn't be folded on tree level already.
In the testcase this happened thanks to loop unrolling on RTL level.
The iteration variable is used as an argument to the clz
builtin. Due to the loop unrolling it becomes a constant and after
folding the broken RTX leads to a wrong assumption.
gcc/ChangeLog:
2018-11-20 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.md ("clztidi2"): Swap the RTX's written to the
DImode parts of the target operand.
gcc/testsuite/ChangeLog:
2018-11-20 Andreas Krebbel <krebbel@linux.ibm.com>
hubicka [Tue, 20 Nov 2018 15:58:37 +0000 (15:58 +0000)]
PR ipa/87706
* ipa-fnsummary.c (pass_ipa_fnsummary): Do not remove functions
* ipa.c (possible_inline_candidate_p): Break out from ..
(process_references): ... here ; drop before_inlining_p;
cleanup handling of alises.
(walk_polymorphic_call_targets): Likewise.
(symbol_table::remove_unreachable_nodes): Likewise.
* passes.c (pass_data_ipa_remove_symbols): New structure.
(pass_ipa_remove_symbols): New pass.
(make_pass_ipa_remove_symbols): New function.
* tree-pass.h (make_pass_ipa_remove_symbols): Declare.
* passes.def (pass_ipa_remove_symbols): Schedule after early passes.
hubicka [Tue, 20 Nov 2018 13:25:04 +0000 (13:25 +0000)]
PR ipa/87706
* ipa-fnsummary.c (pass_ipa_fnsummary): Do not remove functions
* ipa.c (possible_inline_candidate_p): Break out from ..
(process_references): ... here ; drop before_inlining_p;
cleanup handling of alises.
(walk_polymorphic_call_targets): Likewise.
(symbol_table::remove_unreachable_nodes): Likewise.
* passes.c (pass_data_ipa_remove_symbols): New structure.
(pass_ipa_remove_symbols): New pass.
(make_pass_ipa_remove_symbols): New functoin.
* passes.def (pass_ipa_remove_symbols): Schedule after early passes.
rguenth [Tue, 20 Nov 2018 12:20:40 +0000 (12:20 +0000)]
2018-11-20 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vectorizable_condition): Do not get
at else_clause vect def for EXTRACT_LAST_REDUCTION. Remove
pointless vect_is_simple_use calls.
iii [Tue, 20 Nov 2018 09:32:49 +0000 (09:32 +0000)]
S/390: Skip LT(G) peephole when literal pool is involved
By the time peephole optimizations run, we've already made up our mind
whether to use base-register or relative addressing for literal pool
entries. LT(G) supports only base-register addressing, and so it is
too late to convert L(G)RL + compare to LT(G). This change should not
make the code worse unless building with e.g. -fno-dce, since comparing
literal pool entries to zero should be optimized away during earlier
passes.
gcc/ChangeLog:
2018-11-20 Ilya Leoshkevich <iii@linux.ibm.com>
PR target/88083
* config/s390/s390.md: Skip LT(G) peephole when literal pool is
involved.
* rtl.h (contains_constant_pool_address_p): New function.
* rtlanal.c (contains_constant_pool_address_p): Likewise.
gcc/testsuite/ChangeLog:
2018-11-20 Ilya Leoshkevich <iii@linux.ibm.com>
PR target/88083
* gcc.target/s390/pr88083.c: New test.
rguenth [Tue, 20 Nov 2018 09:31:06 +0000 (09:31 +0000)]
2018-11-20 Richard Biener <rguenther@suse.de>
PR middle-end/83215
* alias.c (component_uses_parent_alias_set_from): Remove
alias-set zero and TYPE_TYPELESS_STORAGE case both already
handled in other ways.
ebotcazou [Tue, 20 Nov 2018 08:59:30 +0000 (08:59 +0000)]
PR rtl-optimization/85925
* rtl.h (word_register_operation_p): New predicate.
* combine.c (record_dead_and_set_regs_1): Only apply specific handling
for WORD_REGISTER_OPERATIONS targets to word_register_operation_p RTX.
* rtlanal.c (nonzero_bits1): Likewise. Adjust couple of comments.
(num_sign_bit_copies1): Likewise.
gnattools build machinery uses just-build xgcc and xg++ as $(CC) and
$(CXX) in native builds. However, if C and C++ languages are not
enabled, it won't find them. So, enable C and C++ if Ada is enabled.
Most of the time, this is probably no big deal: C is always enabled
anyway, and C++ is already enabled for bootstraps.
We need not enable those for cross builds, however. At first I just
took the logic from gnattools/configure, but found it to be lacking:
it would use the just-built tools even in cross-back settings, whose
tools just built for the host would not run on the build machine. So
I've narrowed down the test to rely on autoconf-detected cross-ness
(build->host only), but also to ensure that host matches build, and
that target matches host.
I've considered sourcing ada/config-lang.in from within
gnattools/configure, and testing lang_requires as set by it, so as to
avoid a duplication of tests that ought to remain in sync, but decided
it would be too fragile, as ada/config-lang.in does not expect srcdir
to refer to gnattools.
for gcc/ada/ChangeLog
PR ada/81878
* gcc-interface/config-lang.in (lang_requires): Set to "c c++"
when gnattools wants it.
for gnattools/ChangeLog
PR ada/81878
* configure.ac (default_gnattools_target): Do not mistake
just-built host tools as native in cross-back toolchains.
* configure: Rebuilt.
gcc/
* doc/invoke.texi (Link Options): Mention shared libraries
in documentation for the -l option. Simplify discussion and
point to the system linker documentation for details.
fdumont [Mon, 19 Nov 2018 21:02:17 +0000 (21:02 +0000)]
2018-11-19 François Dumont <fdumont@gcc.gnu.org>
* include/ext/throw_allocator.h
(annotate_base::insert(void*, size_t)): Use insert result to check for
double insert attempt.
(annotate_base::insert_construct(void*)): Likewise.
(annotate_base::check_allocated(void*, size_t)): Return found iterator.
(annotate_base::erase(void*, size_t)): Use latter method returned
iterator.
(annotate_base::check_constructed(void*, size_t)): Return found iterator.
(annotate_base::erase_construct(void*)): Use latter method returned
iterator.
ktkachov [Mon, 19 Nov 2018 17:58:00 +0000 (17:58 +0000)]
Disable unrolling for loops vectorised with non-constant VF
This is an alternative to https://gcc.gnu.org/ml/gcc-patches/2018-11/msg00694.html
As richi suggested, this disables unrolling of loops vectorised with variable-length SVE
in the vectoriser itself through the loop->unroll member.
It took me a few tries to get it right, as it needs to be set to '1' to disable unrolling,
the rationale for that mechanism is described in the comment in cfgloop.h.
* tree-vect-loop.c (vect_transform_loop): Disable further unrolling
of the loop if vf is non-constant.
PR tree-optimization/87025 reports an ICE within
-fsave-optimization-record's optrecord_json_writer.
The issue is that dump_context::begin_scope creates an optinfo
of kind OPTINFO_KIND_SCOPE, but fails to call
dump_context::end_any_optinfo, so the optinfo for the scope remains
pending.
The JSON writer would normally push a JSON array for the "scope" optinfo
when the latter is emitted. However, if a dump_* call happens that
doesn't flush the "scope" optinfo e.g. dump_printf (as opposed to
dump_printf_loc), that dump_ call is added to the pending optinfo, and
optinfo::handle_dump_file_kind changes the pending optinfo's m_kind
(e.g. to OPTINFO_KIND_NOTE). Hence when the pending optinfo is
eventually emitted, it isn't OPTINFO_KIND_SCOPE anymore, and hence
the JSON writer doesn't create and push a JSON array for it, leading
to dump_context's view of scopes getting out-of-sync with that of
the JSON writer's.
Later, dump_context::end_scope unconditionally tries to pop the JSON scope
array, but no JSON scope array was added, leading to an assertion
failure (or crash).
The fix is to call dump_context::end_any_optinfo immediately after
creating the scope optinfo, so that it is emitted immediately, ensuring
that the JSON writer stays in-sync with the dump_context.
gcc/ChangeLog:
PR tree-optimization/87025
* dumpfile.c (dump_context::begin_scope): Call end_any_optinfo
immediately after creating the scope optinfo.
(selftest::test_pr87025): New function.
(selftest::dumpfile_c_tests): Call it.
* optinfo-emit-json.cc (optrecord_json_writer::pop_scope): Assert
that we're not popping the top-level records array.
* optinfo.cc (optinfo::handle_dump_file_kind): Assert that we're
not changing the kind of a "scope" optinfo.
gcc/testsuite/ChangeLog:
PR tree-optimization/87025
* gcc.dg/pr87025.c: New test.
dmalcolm [Mon, 19 Nov 2018 16:31:03 +0000 (16:31 +0000)]
Eliminate global state from -fsave-optimization-record
As work towards fixing PR tree-optimization/87025, this patch
eliminates global state from optinfo-emit-json.cc in favor
of adding an optional m_json_writer field to dump_context,
replacing the m_forcibly_enable_optinfo flag.
This allows for writing selftests for the interaction of the
JSON-building code with the dumpfile.c code.
In particular, the existing selftest that created optinfo
instances now exercise the JSON-building code (although no
JSON is actually written out).
The patch also simplifies the layering by replacing optinfo::emit ()
with dump_context::emit_optinfo, so that dump_context has
responsibility for keeping track of dump destinations.
gcc/ChangeLog:
PR tree-optimization/87025
* dump-context.h: Include "optinfo.h".
(class optrecord_json_writer): New forward decl.
(dump_context::forcibly_enable_optinfo_p): Delete.
(dump_context::optinfo_enabled_p): New member function.
(dump_context::optimization_records_enabled_p): New member
function.
(dump_context::set_json_writer): New member function.
(dump_context::emit_optinfo): New member function.
(dump_context::m_forcibly_enable_optinfo): Delete.
(dump_context::m_json_writer): New member data.
* dumpfile.c (dump_context::set_json_writer): New member function.
(dump_context::finish_any_json_writer): New member function.
(dump_context::end_scope): Replace call to
optimization_records_maybe_pop_dump_scope with call to
m_json_writer->pop_scope.
(dump_context::optinfo_enabled_p): New member function.
(dump_context::end_any_optinfo): Replace call to optinfo::emit with call
to dump_context::emit_optinfo.
(dump_context::emit_optinfo): New member function.
(temp_dump_context::temp_dump_context): Replace
m_forcibly_enable_optinfo with call to set_json_writer.
(temp_dump_context::~temp_dump_context): Clean up any json writer.
* optinfo-emit-json.cc (class optrecord_json_writer): Move to
optinfo-emit-json.h
(the_json_writer): Delete.
(optimization_records_start): Delete.
(optimization_records_finish): Delete.
(optimization_records_enabled_p): Delete, in favor of
dump_context::optimization_records_enabled_p.
(optimization_records_maybe_record_optinfo): Delete.
(optimization_records_maybe_pop_dump_scope): Delete.
* optinfo-emit-json.h: Include "json.h". Delete forward
decl of opt_pass.
(optimization_records_start): Delete.
(optimization_records_finish): Delete.
(optimization_records_enabled_p): Delete.
(optimization_records_maybe_record_optinfo): Delete.
(optimization_records_maybe_pop_dump_scope): Delete.
(class optrecord_json_writer): Move here from
optinfo-emit-json.cc.
* optinfo.cc (optinfo::emit_for_opt_problem): Replace call
to optinfo::emit with call to dump_context::emit_optinfo.
(optinfo::emit): Delete, in favor of dump_context::emit_optinfo.
(optinfo_enabled_p): Delete, in favor of
dump_context::optinfo_enabled_p.
(optinfo_wants_inlining_info_p): Update for conversion o
optimization_records_enabled_p to a member function of
dump_context.
* optinfo.h (optinfo_enabled_p): Delete, in favor of
dump_context::optinfo_enabled_p.
(optinfo::emit): Delete, in favor of dump_context::emit_optinfo.
* toplev.c: Include "dump-context.h".
(compile_file): Replace call to optimization_records_finish with
dump_context::finish_any_json_writer.
(do_compile): Replace call to optimization_records_start with
conditionally creating a optrecord_json_writer for the
dump_context.
ville [Mon, 19 Nov 2018 15:05:18 +0000 (15:05 +0000)]
PR libstdc++/87855
Also implement P0602R4 (variant and optional
should propagate copy/move triviality) for std::optional.
* include/std/optional (_Optional_payload): Change
the main constraints to check constructibility in
addition to assignability.
(operator=): Make constexpr.
(_M_reset): Likewise.
(_M_construct): Likewise.
(operator->): Likewise.
* testsuite/20_util/optional/assignment/8.cc: Adjust.
* testsuite/20_util/optional/assignment/9.cc: New.
jakub [Mon, 19 Nov 2018 14:44:08 +0000 (14:44 +0000)]
PR tree-optimization/88071
* tree-vect-loop.c (vectorize_fold_left_reduction): Pass true instead
of false as last argument to gsi_remove.
* tree-vect-stmts.c (vect_finish_replace_stmt): Pass true instead of
false as last argument to gsi_replace.
jakub [Mon, 19 Nov 2018 13:44:13 +0000 (13:44 +0000)]
PR debug/87039
* omp-expand.c: Don't include debug.h.
(adjust_context_and_scope): Add REGION argument. Find DECL_CONTEXT
from innermost outer parallel, task, teams or target that has a
child_fn set, or, if there is no such outer region, use
current_function_decl. Do the DECL_CONTEXT adjustment regardless of
whether a suitable BLOCK is found or not.
(expand_parallel_call, expand_teams_call): Don't call
adjust_context_and_scope here.
(grid_expand_target_grid_body): Revert 2017-01-25 changes.
(expand_omp_taskreg, expand_omp_target): Likewise. Call
adjust_context_and_scope.
* dwarf2out.c (dwarf2out_early_global_decl): For
decl_function_context recurse instead of calling dwarf2out_decl.
* g++.dg/gomp/pr78363-4.C: New test.
* g++.dg/gomp/pr78363-5.C: New test.
* g++.dg/gomp/pr78363-6.C: New test.
* g++.dg/gomp/pr78363-7.C: New test.
redi [Mon, 19 Nov 2018 10:53:59 +0000 (10:53 +0000)]
PR libstdc++/88084 - Implement LWG 2777
* include/std/string_view (basic_string_view::copy): Use traits to
copy.
* testsuite/21_strings/basic_string_view/operations/copy/char/2.cc:
New test.
* testsuite/21_strings/basic_string_view/operations/copy/wchar_t/2.cc:
New test.
gcc/
* doc/extend.texi (Common Function Attributes): Document that
no_instrument_function applies to -p and -pg, too.
* doc/invoke.texi (Instrumentation Options): Add cross-references
to docs for -p, -pg, and -finstrument-functions.
emsr [Sun, 18 Nov 2018 18:32:26 +0000 (18:32 +0000)]
2018-11-16 Michele Pezzutti <mpezz@tiscali.it>
Edward Smith-Rowland <3dw4rd@verizon.net>
PR libstdc++/83566 - cyl_bessel_j returns wrong result for x>1000
for high orders.
* include/tr1/bessel_function.tcc: Perform no fewer than nu/2 iterations
of the asymptotic series (nu is the Bessel order).
* testsuite/tr1/5_numerical_facilities/special_functions/
09_cyl_bessel_j/check_value.cc: Add tests at nu=100, 1000<=x<=2000.
* testsuite/tr1/5_numerical_facilities/special_functions/
11_cyl_neumann/check_value.cc: Ditto.
* testsuite/special_functions/08_cyl_bessel_j/check_value.cc: Ditto.
* testsuite/special_functions/10_cyl_neumann/check_value.cc: Ditto.
amodra [Sun, 18 Nov 2018 10:25:24 +0000 (10:25 +0000)]
Allow target to override gnu-user.h crti and crtn
Also give target access to the gnu-user.h LINK_GCC_C_SEQUENCE_SPEC.
* config/gnu-user.h (GNU_USER_TARGET_CRTI): Define.
(GNU_USER_TARGET_STARTFILE_SPEC): Use it here.
(GNU_USER_TARGET_CRTN): Define.
(GNU_USER_TARGET_ENDFILE_SPEC): Use it here.
(GNU_USER_TARGET_LINK_GCC_C_SEQUENCE_SPEC): Define.
amodra [Sun, 18 Nov 2018 10:22:10 +0000 (10:22 +0000)]
Delete !HAVE_LD_PIE variants of startfile/endfile specs
The HAVE_LD_PIE variant doesn't contain anything that will break
linking when !HAVE_LD_PIE that isn't already broken if you choose to
build PIEs with a linker that doesn't support PIE. All this
HAVE_LD_PIE protects is the choice of different crt files, which is
more about libc capability than linker capability.
tkoenig [Sun, 18 Nov 2018 09:16:19 +0000 (09:16 +0000)]
2018-11-18 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/70260
* expr.c (gfc_check_assign): Reject assigning to an external
symbol.
(gfc_check_pointer_assign): Add suppress_type_test
argument. Insert line after if. A non-proc pointer can not point
to a constant. Only check types if suppress_type_test is false.
* gfortran.h (gfc_check_pointer_assign): Add optional
suppress_type_test argument.
* resolve.c (gfc_resolve_code): Move up gfc_check_pointer_assign
and give it the extra argument.
(resolve_fl_procedure): Set error on value for a function with
an inizializer.
2018-11-18 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/70260
* gfortran.dg/proc_ptr_result_5.f90: Add dg-error directive.
* gfortran.dg/protected_4.f90: Split line to allow for extra error.
* gfortran.dg/protected_6.f90: Likewise.
* gfortran.dg/assign_11.f90: New test.
* gfortran.dg/pointer_assign_12.f90: New test.
redi [Sat, 17 Nov 2018 23:35:44 +0000 (23:35 +0000)]
Implement std::pmr::synchronized_pool_resource
Define the thread-safe pool resource, using a shared_mutex to allow
multiple threads to concurrently allocate from thread-specific pools.
Define new weak symbols for the pthread_rwlock_t functions, to avoid
making libstdc++.so depend on libpthread.so
When the necessary Gthread support is absent only define the
feature-test macro to 1, rather than 201603. This is intended to imply
incomplete support, because everything except synchronized_pool_resource
works.
Implement std::pmr::synchronized_pool_resource
* config/abi/pre/gnu.ver: Add new symbols.
* include/std/memory_resource [_GLIBCXX_HAS_GTHREADS]
(__cpp_lib_memory_resource): Define to expected value, 201603.
(synchronized_pool_resource): New class.
[!_GLIBCXX_HAS_GTHREADS] (__cpp_lib_memory_resource): Define to 1.
* include/std/shared_mutex (__glibcxx_rwlock_rdlock)
(__glibcxx_rwlock_tryrdlock, __glibcxx_rwlock_wrlock)
(__glibcxx_rwlock_trywrlock, __glibcxx_rwlock_unlock)
(__glibcxx_rwlock_destroy, __glibcxx_rwlock_init)
(__glibcxx_rwlock_timedrdlock, __glibcxx_rwlock_timedwrlock): Define
weak symbols for POSIX rwlock functions.
(__shared_mutex_pthread): Use weak symbols.
* include/std/version (__cpp_lib_memory_resource): Define.
* src/c++17/memory_resource.cc [_GLIBCXX_HAS_GTHREADS]
(synchronized_pool_resource::_TPools): New class.
(destroy_TPools): New function for pthread_key_create destructor.
(synchronized_pool_resource::synchronized_pool_resource)
(synchronized_pool_resource::~synchronized_pool_resource)
(synchronized_pool_resource::release)
(synchronized_pool_resource::do_allocate)
(synchronized_pool_resource::do_deallocate): Define public members.
(synchronized_pool_resource::_M_thread_specific_pools)
(synchronized_pool_resource::_M_alloc_tpools)
(synchronized_pool_resource::_M_alloc_shared_tpools): Define private
members.
* testsuite/20_util/synchronized_pool_resource/allocate.cc: New test.
* testsuite/20_util/synchronized_pool_resource/cons.cc: New test.
* testsuite/20_util/synchronized_pool_resource/is_equal.cc: New test.
* testsuite/20_util/synchronized_pool_resource/multithreaded.cc: New
test.
* testsuite/20_util/synchronized_pool_resource/release.cc: New test.
* testsuite/performance/20_util/memory_resource/pools.cc: Add
multithreaded tests using pmr::synchronized_pool_resource.
wilson [Sat, 17 Nov 2018 23:31:01 +0000 (23:31 +0000)]
RISC-V: Fix epilogue unwind info with fp and single sp adjust.
gcc/
* config/riscv/riscv.c (epilogue_cfa_sp_offset): New.
(riscv_restore_reg): If restoring HARD_FRAME_POINTER_REGNUM, and
epilogue_cfa_sp_offset set, then add REG_CFA_DEF_CFA regnote.
(riscv_expand_epilogue): Initialize epilogue_cfa_sp_offset. Set it
to step2 if frame_pointer_needed and step1 is 0.
jakub [Sat, 17 Nov 2018 15:10:48 +0000 (15:10 +0000)]
PR tree-optimization/87546
* tree-vect-patterns.c (vect_look_through_possible_promotion): Add
min_precision variable, initially set it to orig_precision, only does
something if op_type's precision is <= min_precision and update
min_precision whenever calling set_op.
jakub [Sat, 17 Nov 2018 15:09:43 +0000 (15:09 +0000)]
PR rtl-optimization/88018
* cfgrtl.c (fixup_abnormal_edges): Guard moving insns to fallthru edge
on the presence of fallthru edge, rather than if it is a USE or not.
jozefl [Fri, 16 Nov 2018 23:53:30 +0000 (23:53 +0000)]
2018-11-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR target/87927
* target-def.h: Initialize TARGET_ASM_{,UN}ALIGNED_P{S,D,T}I_OP.
Add them to the TARGET_ASM_{,UN}ALIGNED_INT_OP structs.
* target.def: Enumerate TARGET_ASM_{,UN}ALIGNED_P{S,D,T}I_OP in
the byte_op hook.
* target.h: Add psi, pdi, pti to struct asm_int_op definition.
* targhooks.c (default_print_patchable_function_entry): Assert
asm_int_op does not return a NULL string.
* varasm.c (integer_asm_op): Return the op for a partial int type
when the requested size does not correspond to an integer type.
* config/msp430/msp430.c: Initialize TARGET_ASM_{,UN}ALIGNED_PSI_OP.
* doc/tm.texi: Regenerate.
jason [Fri, 16 Nov 2018 21:49:42 +0000 (21:49 +0000)]
Implement P0479R5, [[likely]] and [[unlikely]].
[[likely]] and [[unlikely]] are equivalent to the GNU hot/cold attributes,
except that they can be applied to arbitrary statements as well as labels;
this is most likely to be useful for marking if/else branches as likely or
unlikely. Conveniently, PREDICT_EXPR fits the bill nicely as a
representation.
I also had to fix marking case labels as hot/cold, which didn't work before.
Which then required me to force __attribute ((fallthrough)) to apply to the
statement rather than the label.
jakub [Fri, 16 Nov 2018 16:43:49 +0000 (16:43 +0000)]
PR rtl-optimization/87475
* cfgrtl.c (patch_jump_insn): Allow redirection failure for
CROSSING_JUMP_P insns.
(cfg_layout_redirect_edge_and_branch): Don't ICE if ret is NULL.
jakub [Fri, 16 Nov 2018 16:40:53 +0000 (16:40 +0000)]
PR middle-end/88032
* optabs.c (expand_binop): For op0_mode use GET_MODE (op0), unless it
is VOIDmode, in which case use int_mode. Similarly for op1_mode.
projects / thirdparty / gcc.git / log
