Ralph Boehme [Tue, 23 Aug 2016 11:11:24 +0000 (13:11 +0200)]
vfs_acl_common: rename pdesc_next to psd_fs
In most realistic cases the "next" VFS op will return the permissions
from the filesystem. This rename makes it explicit where the SD is
originating from. No change in behaviour.
This just paves the way for a later change that will simplify the whole
logic and talloc hierarchy.
Ralph Boehme [Tue, 23 Aug 2016 11:08:12 +0000 (13:08 +0200)]
vfs_acl_common: rename psd to psd_blob in get_nt_acl_internal()
This makes it explicit where the SD is originating from. No change in
behaviour.
This just paves the way for a later change that will simplify the whole
logic and talloc hierarchy, therefor this also strictly renames the
occurences after the out label.
Logically, behind the out label, we're dealing with a variable that
points to what we're going to return, so the name psd_blob is
misleading, but I'm desperately trying to avoid logic changes in this
commit and therefor I'm just strictly renaming.
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Thu Aug 18 18:58:22 CEST 2016 on sn-devel-144
Uri Simchoni [Fri, 12 Aug 2016 21:19:33 +0000 (00:19 +0300)]
smbd: look only at handle readability for COPYCHUNK dest
This commits sets the stage for a change of behavior
in a later commit.
When checking FILE_READ_DATA on the COPYCHUNK dest handle,
only check the handle readability and not the extra right
that may have been added due to the FILE_EXECUTE right.
The check for FILE_READ_DATA always seemed strange for the
dest handle, which is not read. It turns out that in Windows,
this check is not done at the SMB layer, but at a lower layer
that processes the IOCTL request - the IOCTL code has bits
that specify what type of access check needs to be done.
Therefore, this lower layer is unaware of the SMB layer's
practice of granting READ access based on the FILE_EXECUTE
right, and it only checks the handle's readability.
This subtle difference has observable behavior - the
COPYCHUNK source handle can have FILE_EXECUTE right instead
of FILE_READ_DATA, but the dest handle cannot.
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue Aug 16 15:21:03 CEST 2016 on sn-devel-144
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
(cherry picked from commit 5bf11f6f5b4dab4cba4b00674bcb76138fb55974)
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
(cherry picked from commit 6ce0304eda4b464972defcecd591fab03428bd03)
Uri Simchoni [Sat, 13 Aug 2016 18:23:34 +0000 (21:23 +0300)]
seltest: implicit FILE_READ_DATA non-reporting
This test (passes against Windows Server 2012R2) shows
that the implicit FILE_READ_DATA that is added whenever
FILE_EXECUTE is granted, is not reported back when querying
the handle.
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
(cherry picked from commit 7dc9f582066d500bf57000891560610e8d2e208c)
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
(cherry picked from commit 1b06acafa4e9ea91a50e5ed85da881187057da6e)
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
(cherry picked from commit 20b9a5bd74fafbca4b7cc7952c27033edcf0eeb8)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Christian Ambach <ambi@samba.org>
Autobuild-User(master): Christian Ambach <ambi@samba.org>
Autobuild-Date(master): Fri Sep 2 18:10:44 CEST 2016 on sn-devel-144
Andrew Bartlett [Fri, 26 Aug 2016 03:53:19 +0000 (15:53 +1200)]
dbcheck: Abandon dbcheck if we get an error during a transaction
Otherwise, anything that the transaction has already done to the DB will be left in the DB
even despite the failure. For example, if a fix wrote to the DB, but then failed a post-write
check, then the fix will not be unrolled.
This is because we do not have nested transactions in TDB.
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Aug 29 12:46:21 CEST 2016 on sn-devel-144
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 9d0c869e36ba2f43fd2ed4cd090b48102d499bc8)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Sep 2 22:05:33 CEST 2016 on sn-devel-144
Andrew Bartlett [Sat, 2 Jan 2016 07:58:39 +0000 (20:58 +1300)]
ldb-samba: Add "secret" as a value to hide in LDIF files
This is not secret or encrypted in LDAP, but is sensitive in secrets.ldb
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Wed May 11 07:17:38 CEST 2016 on sn-devel-144
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Mon Aug 8 17:34:24 CEST 2016 on sn-devel-144
script/autobuild.py: include the branch name in the output
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Aug 11 08:38:47 CEST 2016 on sn-devel-144
Garming Sam [Wed, 4 May 2016 22:37:08 +0000 (10:37 +1200)]
autobuild: fix typo in autobuild success subject line
Signed-off-by: Garming Sam <garming@catalyst.net.nz> Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Thu May 5 04:15:16 CEST 2016 on sn-devel-144
Garming Sam [Mon, 14 Mar 2016 01:18:54 +0000 (14:18 +1300)]
autobuild: Return the last 50 log lines
This means that you don't have to deal with tars for quickly determining
the cause of a failure.
Signed-off-by: Garming Sam <garming@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 3751ffbbe75524984a822d65f623a040ca79c8f7)
Andrew Bartlett [Wed, 21 Oct 2015 01:35:33 +0000 (14:35 +1300)]
autobuild: Give a clearer failure message
This helps when autobuild.py is used in --tail mode and
where there is neither e-mail nor access to the logs.tar.gz
Working back to find where the error happened is typically
quite difficult, as many failures are actually due to the
cleanup.
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 9a91fce2deccfe0445363b2a35f2cfb72fdff766)
Ralph Boehme [Mon, 8 Aug 2016 14:58:51 +0000 (16:58 +0200)]
dbwrap_ctdb: treat empty records in ltdb as non-existing
When fetching records from remote ctdb nodes via ctdbd_parse() or in
db_ctdb_traverse(), we already check for tombstone records and skip
them. This was originally also done for the ltdb checks.
This patch re-introduces the consistent treatment of empty records in
the ltdb but avoids the deadlock by correctly signalling
NT_STATUS_NOT_FOUND if an empty record is found authoritatively in
the ltdb and not calling ctdb in this case.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org> Signed-off-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Aug 9 04:38:44 CEST 2016 on sn-devel-144
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 7147859c7afc1344e76485e2cbc286679110d96e)
Ralph Boehme [Wed, 3 Aug 2016 13:00:45 +0000 (15:00 +0200)]
async_req: make async_connect_send() "reentrant"
Allow callers to pass in socket fds that where already passed to an
earlier call of async_connect_send(). Callers expect this behaviour and
it was working until 05d4dbda8357712cb81008e0d611fdb0e7239587 broke it.
The proper fix would be to change callers to close the fd and start from
scratch with a fresh socket.
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Aug 4 05:03:21 CEST 2016 on sn-devel-144
Ralph Boehme [Fri, 15 Jul 2016 15:48:19 +0000 (17:48 +0200)]
vfs_acl_xattr: objects without NT ACL xattr
Even with "ignore system acls" set to "yes", for objects without NT ACL
xattr we use the underlying filesystem permissions to construct an NT
ACL. This can result in *very* unexpected permissions, eg:
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue Jul 19 10:22:05 CEST 2016 on sn-devel-144
Ralph Boehme [Tue, 5 Jul 2016 13:37:53 +0000 (15:37 +0200)]
smbd/notifyd: use smbd_reinit_after_fork()
Using smbd_reinit_after_fork() rather then reinit_after_fork() ensures
am_parent is reset to NULL. Otherwise, when exiting for some reason, the
inherited atexit handler killkids() calls kill(0,SIGTERM) terminating
our whole process group including the main smbd.
Ralph Boehme [Tue, 5 Jul 2016 13:38:31 +0000 (15:38 +0200)]
s3-rpc_server/mdssd: use smbd_reinit_after_fork()
Using smbd_reinit_after_fork() rather then reinit_after_fork() ensures
am_parent is reset to NULL. Otherwise, when exiting for some reason, the
inherited atexit handler killkids() calls kill(0,SIGTERM) terminating
our whole process group including the main smbd.
Ralph Boehme [Sun, 12 Jun 2016 17:03:11 +0000 (19:03 +0200)]
selftest: test idmap backend id allocation for unknown SIDS
If an SID is is not found becaues the RID doesn't exist in a domain and
the domain is configured to use a non-allocating idmap backend like
idmap_ad or idmap_rfc2307, winbindd must not return a mapping for the
SID.
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 2a322a7671c9ffd0dd600142dd76b5b51a67e185)
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit aa54fa4e88cc80bc7841beba3a5561ad2c83dc80)
Ralph Boehme [Fri, 24 Jun 2016 13:16:42 +0000 (15:16 +0200)]
winbindd: in wb_lookupsids return domain name if we have it
When doing a SID to xid mapping for an unknown SID, the idmap child gets
passed a lsa_RefDomainList with an empty domain name (ie ""). This is
coming from LsaLookupSids() and causes the mapping request to end up in
the default idmap domain.
In _wbint_Sids2UnixIDs() we call idmap_find_domain_with_sid() with the
domain name "" and this triggers use of the default idmap domain which
in case of idmap_autorid will allocate an id from a idmap_autorid range.
If we know the domain, ensure we return it for SIDs were the SID was not
found but the domain of the SID was found. Callers like sids2xids depend
on the domain name and returning an empty string "" for valid domain can
trigger unwanted idmap range allocations.
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 9be918116e356c358ef77cc2933e471090088293)
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
(cherry picked from commit 5e346af078847512e86755a4634583a8a5178c0e)
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Mar 18 03:52:55 CET 2016 on sn-devel-144
protocol is the IEEE 802.3
protocol number in network byte order. See the <linux/if_ether.h>
include file for a list of allowed protocols. When protocol is set to
htons(ETH_P_ALL), then all protocols are received.
Specifying "protocol" field to socket(AF_PACKET, ...) call only affects
the packets that are recevied. So use protocol = 0 when sending raw
packets.
Signed-off-by: Amitay Isaacs <amitay@gmail.com> Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Mar 4 12:58:50 CET 2016 on sn-devel-144
Jeremy Allison [Wed, 20 Jul 2016 18:34:48 +0000 (11:34 -0700)]
s3: smbd: Fix delete operations enumerating streams inside a file. This must always be done as a Windows operation.
When using UNIX extensions to delete a file containing streams,
the open for delete and close operations need to enumerate the
contained streams and do CREATE and UNLINK operations on the
stream names. These must always be done as Windows operations
(use lp_set_posix_pathnames(false) to flip the processing) as
the stream names are Windows paths.
Without this the create operation under the unlink will
recurse and cause the client to time out (or a server crash).
This (hack) is only needed for 4.4.x and below, it is fixed
correctly in 4.5.x.
Jeremy Allison [Tue, 28 Jun 2016 22:38:22 +0000 (15:38 -0700)]
s4: ldb: Ignore case of "range" in sscanf as we've already checked for its presence.
https://bugzilla.samba.org/show_bug.cgi?id=11838
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 1d4b20d4f3829eb3778006397990cd9fee4966a5)
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12025 Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
(cherry picked from commit 748384992b96c3936d82bc09f39459fb4bd489bd)
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12026 Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
(cherry picked from commit d183261e6844724394d618912403cd0217401741)
libads: ensure the right ccache is used during spnego bind
When doing spnego sasl bind:
1. Try working without kinit only if a password is not
provided
2. When using kinit, ensure the KRB5CCNAME env var is set
to a private memory ccache, so that the bind is on behalf
of the requested user.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jul 12 03:23:33 CEST 2016 on sn-devel-144
libads: ensure the right ccache is used during gssapi bind
When doing gssapi sasl bind:
1. Try working without kinit only if a password is not
provided
2. When using kinit, ensure the KRB5CCNAME env var is set
to a private memory ccache, so that the bind is on behalf
of the requested user.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Uri Simchoni <uri@samba.org>
(cherry picked from commit 2672968851966e5c01e4fc4d906b45b5c047e655)
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Richard Sharpe <sharpe@samba.org>
Autobuild-Date(master): Wed Jul 6 00:40:15 CEST 2016 on sn-devel-144
Signed-off-by: Uri Simchoni <uri@samba.org> Reviewed-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
(cherry picked from commit a646d9e796902dcb5246eb585433d4859796be2f)
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(v4-3-test): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(v4-3-test): Fri Jul 8 10:51:50 CEST 2016 on sn-devel-104
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit d9e242e9035c15e49b041afc61e5a4a08877f289)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Jun 23 04:51:16 CEST 2016 on sn-devel-144
s4:librpc/rpc: allow a total reassembled response payload of 240 MBytes
This will replace DCERPC_NCACN_PAYLOAD_MAX_SIZE (4 MByte),
The limit of DCERPC_NCACN_PAYLOAD_MAX_SIZE (4 MByte) was too
strict for some workloads, e.g. DRSUAPI replication with large objects.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 7413e73c5331b760dc84b3843059230ec5fcfc7b)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 281e11b53f676647997fb9ce21227782529a62ad)
s3-winbind: Fix memory leak with each cached credential login
When we allow offline logon and have a lot of logins, windbind will leak
4k of memory which each log in. On systems with heavy load this can grow
quickly and the OOM killer will kill Winbind.
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Jun 29 19:03:53 CEST 2016 on sn-devel-144
Andrew Bartlett [Fri, 9 Oct 2015 20:30:17 +0000 (09:30 +1300)]
build: Enable NTVFS file server to be omitted
We now only build it by default with --enable-sefltest, or otherwise
if requested.
The NTVFS file server still has features not present in the smbd file
server, such as a CIFS/SMB proxy, and a radically different design,
but it is also not undergoing any ongoing development so this keeps it
in a safe state for care and maintaince, with less of a security risk
if such an issue were to come up.
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 71dcc76b70d8e249624f9bf057fc4fd3a44125e1)
Signed-off-by: Andrew Bartlett <abartlet@samba.org> Reviewed-by: Garming Sam <garming@catalyst.net.nz>
(cherry picked from commit 0b4c741b9c03d147ee5f56d027bacda75c1b5282)
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Richard Sharpe <rsharpe@samba.org>
Autobuild-User(master): Richard Sharpe <sharpe@samba.org>
Autobuild-Date(master): Mon Jun 27 00:01:55 CEST 2016 on sn-devel-144
Ralph Boehme [Thu, 23 Jun 2016 10:24:33 +0000 (12:24 +0200)]
s3/smbd: only use stored dos attributes for open_match_attributes() check
This changes the way we check for old vs new DOS attributes on open with
overwrite: only check against the DOS attributes actually set by a
client and stored in the DOS attributes xattr.
With this change "hide dot files" and "hide files" continue to work with
"store dos attributes = yes".
Ralph Boehme [Thu, 23 Jun 2016 14:40:15 +0000 (16:40 +0200)]
s3/smbd: call dos_mode_from_name after get_ea_dos_attribute()
This doesn't change overall behaviour in any way, it just prepares for
the next step where the IS_HIDDEN_PATH() stuff will be moved to the
function dos_mode_from_name().
It allows an optimisation by not checking "hide to files" patch if
FILE_ATTRIBUTE_HIDDEN was already set in the DOS xattr.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit d9e242e9035c15e49b041afc61e5a4a08877f289)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Jun 23 04:51:16 CEST 2016 on sn-devel-144
s4:librpc/rpc: allow a total reassembled response payload of 240 MBytes
This will replace DCERPC_NCACN_PAYLOAD_MAX_SIZE (4 MByte),
The limit of DCERPC_NCACN_PAYLOAD_MAX_SIZE (4 MByte) was too
strict for some workloads, e.g. DRSUAPI replication with large objects.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 7413e73c5331b760dc84b3843059230ec5fcfc7b)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(cherry picked from commit 281e11b53f676647997fb9ce21227782529a62ad)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jun 24 18:08:44 CEST 2016 on sn-devel-144
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit 7d8edcc24148658e92729b3d155e432994e27525)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit aef032302863e5f3a888dbf4c52b21d561a0dff4)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit 3f7e3ed8a276f16aaed87c1f3cd5b9781aa7e1af)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit f386e81b982cd551313eb9c0f7d2f70d65515d80)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit e05c732c6074df2524403ad7bb30eade91443525)
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
(cherry picked from commit 505a4e68d96e6fb3d8c7493632ecb4b0fc6caa9d)
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Wed Jun 22 10:33:29 CEST 2016 on sn-devel-144
projects / thirdparty / samba.git / log
