Weiming Shi [Sat, 4 Jul 2026 17:14:21 +0000 (10:14 -0700)]
ipv4: fib: free fib_alias with kfree_rcu() on insert error path
fib_table_insert() publishes new_fa into the leaf's fa_list with
fib_insert_alias() before calling the fib entry notifiers. When a
notifier fails, the error path removes new_fa with fib_remove_alias()
(hlist_del_rcu) and frees it right away with kmem_cache_free().
fib_table_lookup() walks that list under rcu_read_lock() only, so a
concurrent lookup that already reached new_fa keeps reading it after the
free:
BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601)
Read of size 1 at addr ffff88810676d4eb by task exploit/297
Call Trace:
fib_table_lookup (net/ipv4/fib_trie.c:1601)
ip_route_output_key_hash_rcu (net/ipv4/route.c:2814)
ip_route_output_key_hash (net/ipv4/route.c:2705)
__ip4_datagram_connect (net/ipv4/datagram.c:49)
udp_connect (net/ipv4/udp.c:2144)
__sys_connect (net/socket.c:2167)
__x64_sys_connect (net/socket.c:2173)
do_syscall_64
entry_SYSCALL_64_after_hwframe
which belongs to the cache ip_fib_alias of size 56
Triggering the error path needs CAP_NET_ADMIN and a registered fib
notifier that can reject a route; a netdevsim device whose IPv4 FIB
resource is exhausted is enough.
Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already
does for a fib_alias removed from the trie.
Fixes: a6c76c17df02 ("ipv4: Notify route after insertion to the routing table") Reported-by: Xiang Mei <xmei5@asu.edu> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260704171421.1786806-1-bestswngs@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It runs under rcu_read_lock() holding only an l2tp_session reference and
takes NO reference on the internal PPP channel (struct channel,
chan->ppp) that ppp_input() dereferences.
The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel
are RCU-safe. But the internal struct channel is a separate allocation
that ppp_release_channel() frees with a plain kfree():
For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit
(no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips
both ppp_disconnect_channel()'s synchronize_net() and
ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace
period. rcu_read_lock() in pppol2tp_recv() does not protect against a
plain kfree(), so an in-flight ppp_input() on one CPU can dereference
the channel just freed by close() on another CPU.
The bug is reachable by an unprivileged user.
Defer the channel free to an RCU callback via call_rcu() so the grace
period fences any in-flight ppp_input(). The disconnect and unbridge
teardown paths already fence with synchronize_net()/synchronize_rcu();
call_rcu() does the same here without stalling the close() path.
Fixes: ee40fb2e1eb5 ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Norbert Szetei <norbert@doyensec.com> Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev> Link: https://patch.msgid.link/E793FCF2-58DE-4387-A983-C7B4BC3158BD@doyensec.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'net-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, Bluetooth and batman-adv.
Current release - regressions:
- bluetooth: fix using chan->conn as indication to no remote netdev
Current release - new code bugs:
- netfilter: cap to maximum number of expectation per master on
updates
Previous releases - regressions:
- bluetooth:
- fix UAF of hci_conn_params in add_device_complete
- fix null ptr deref in hci_abort_conn()
- igmp: remove multicast group from hash table on device destruction
- batman-adv: prevent TVLV OOB check overflow
- eth: mlx5/mlx5e:
- fix off-by-one in single-FDB error rollback
- skip peer flow cleanup when LAG seq is unavailable
- fix crashes in dynamic per-channel stats and HV VHCA agent
- eth: mana: Sync page pool RX frags for CPU
Previous releases - always broken:
- netfilter:
- mark malformed IPv6 extension headers for hotdrop
- terminate table name before find_table_lock()
- ipvs: use parsed transport offset in TCP state lookup
* tag 'net-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
macsec: don't read an unset MAC header in macsec_encrypt()
dibs: loopback: validate offset and size in move_data()
octeontx2-af: fix VF bringup affecting PF promiscuous state
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian
net/mlx5: Fix L3 tunnel entropy refcount leak
net: macb: drop in-flight Tx SKBs on close
net: mana: Sync page pool RX frags for CPU
net: mana: Validate the packet length reported by the NIC
selftests/net: fix EVP_MD_CTX leak in tcp_mmap
ipvs: ensure inner headers in ICMP errors are in headroom
ipvs: use parsed transport offset in SCTP state lookup
ipvs: use parsed transport offset in TCP state lookup
ipvs: pass parsed transport offset to state handlers
netfilter: handle unreadable frags
netfilter: flowtable: support IPIP tunnel with direct xmit
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
netfilter: flowtable: use dst in this direction when pushing IPIP header
netfilter: ipset: allocate the proper memory for the generic hash structure
netfilter: ipset: cleanup the add/del backlog when resize failed
netfilter: ipset: exclude gc when resize is in progress
...
Daehyeon Ko [Fri, 3 Jul 2026 08:36:33 +0000 (17:36 +0900)]
macsec: don't read an unset MAC header in macsec_encrypt()
macsec_encrypt() reads the Ethernet header via eth_hdr(skb)
(skb->head + skb->mac_header) to memmove() the 12 source/destination MAC
bytes forward and make room for the SecTAG.
On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb
reaches the macsec ndo_start_xmit() with the MAC header unset, so
eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of
bounds: a 12-byte heap over-read that is also emitted on the wire as the
frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds
read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET
build flags it as an unset mac header in skb_mac_header().
On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added
by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in
macvlan_broadcast()") for exactly this purpose.
Dust Li [Tue, 7 Jul 2026 07:43:18 +0000 (15:43 +0800)]
dibs: loopback: validate offset and size in move_data()
The loopback move_data() performs a memcpy into the registered DMB
without checking whether offset + size exceeds the DMB length. Unlike
real ISM hardware, which enforces memory region bounds natively, the
software loopback has no such protection.
A peer-supplied out-of-bounds offset or oversized write would result in
an OOB write past the allocated kernel buffer. Add an explicit bounds
check before the memcpy to reject such requests with -EINVAL.
Fixes: f7a22071dbf3 ("net/smc: implement DMB-related operations of loopback-ism") Cc: stable@vger.kernel.org Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reported-by: Baul Lee <baul.lee@xbow.com> Link: https://patch.msgid.link/20260707074318.1448662-1-dust.li@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Nitin Shetty J <nshettyj@marvell.com> Link: https://patch.msgid.link/20260702045616.3002773-2-nshettyj@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 9 Jul 2026 09:42:56 +0000 (11:42 +0200)]
Merge tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*.
Most of these are LLM fixes for old issues flagged by sashiko/LLMs.
Many of these trigger drive-by-findings in sashiko. In particular:
- many load/store tearing and missing memory barriers, races
etc. in ipset, esp. with GC and resizing.
Keeping the proposed patches spinning for yet-another-iteration
keeps legit fixes back, so I prefer to add these now and follow
up with other reports later.
- flowtable work queue still has possible races with teardown,
but same rationale as with ipset: drive-by findings, not
problems coming with the flowtable IPIP changeset in this PR.
- ever since unreadable frag skb support was added in 6.12, we can no
longer do: BUG_ON(skb_copy_bits( ...): it will fire with such skbs.
Mina Almasry is looking at similar patterns elsewhere in the stack.
1) Guard skb->mac_header adjustment after IPv6 defragmentation in
nf_conntrack_reasm. From Xiang Mei.
2) NUL-terminate ebtables table names before calling find_table_lock() to
prevent stack-out-of-bounds reads. Also from Xiang Mei.
3) Zero the ebtables chainstack array, else error unwind may free bogus
pointer when CPU mask is sparse. All three issues date from 2.6 days.
4) Ensure ebtables module names are c-strings, same bug pattern as 2).
Bug added in 4.6.
5) Fix catchall element handling for inverted lookups in nft_lookup. Fold the
catchall lookup into ext before computing the match status. Was like
this ever since catchall elements got introduced in 5.13.
From Tamaki Yanagawa.
6-9) ipset updates from Jozsef Kadlecsik:
- mark rcu protected areas correctly
- address gc and resize clash in the comment extension
- add/del backlog cleanup in the error path
- allocate right size for the generic hash structure
10-12): IPIP flowtable updates from Pablo Neira Ayuso:
- Use the current direction's route when pushing IPIP headers
Fix incorrect headroom and fragmentation offset calculations.
- Avoid hardware offload for IPIP tunnels due to lack of driver support.
- Support IPIP tunnels with direct xmit in netfilter flowtable.
dst_cache and dst_cookie are moved outside the union to share route
state across flows. This is a followup to work done in 6.19 cycle.
13) Don't BUG() on skb_copy_bits error. Handle unreadable fragments by
either returning an error or restricting the copy operations to linear area,
This became an issue when unreable frag support was merged in 6.12.
14-16): IPVS updates from Yizhou Zhao:
- Pass parsed transport offset to IPVS state handlers.
update callback signatures.
- use correct transport header offset on state lookp in TCP.
As-is it was possible for ipv6 extension header data to be
treated as L4 header.
- same for SCTP. This was also broken since 2.6 days.
17) Ensure inner IP headers in ICMP errors are in the skb headroom after
stripping outer headers. Add more checks for the length of inner headers.
This was broken since 3.7 days.
From Julian Anastasov.
netfilter pull request nf-26-07-08
* tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
ipvs: ensure inner headers in ICMP errors are in headroom
ipvs: use parsed transport offset in SCTP state lookup
ipvs: use parsed transport offset in TCP state lookup
ipvs: pass parsed transport offset to state handlers
netfilter: handle unreadable frags
netfilter: flowtable: support IPIP tunnel with direct xmit
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
netfilter: flowtable: use dst in this direction when pushing IPIP header
netfilter: ipset: allocate the proper memory for the generic hash structure
netfilter: ipset: cleanup the add/del backlog when resize failed
netfilter: ipset: exclude gc when resize is in progress
netfilter: ipset: mark the rcu locked areas properly
netfilter: nft_lookup: fix catchall element handling with inverted lookups
netfilter: ebtables: module names must be null-terminated
netfilter: ebtables: zero chainstack array
netfilter: ebtables: terminate table name before find_table_lock()
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
====================
Gal Pressman [Mon, 6 Jul 2026 05:50:17 +0000 (08:50 +0300)]
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian
ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes,
but ethnl_rss_set() and ethnl_rss_create_doit() parse them with
ethnl_update_u8(), which reads a single byte.
On little endian this happens to read the least significant byte and
works as long as the value fits in a byte. On big endian it reads the
most significant byte, so the requested value is parsed incorrectly.
The destination fields in struct ethtool_rxfh_param are u8, so the
attribute can't be read directly with ethnl_update_u32().
Cap the hfunc policy at U8_MAX so an out of range value is rejected
instead of being silently truncated into the u8 field, and add
ethnl_update_u8_u32() to read the full u32 and narrow it into the u8
destination.
Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Li RongQing [Fri, 3 Jul 2026 14:14:23 +0000 (22:14 +0800)]
net/mlx5: Fix L3 tunnel entropy refcount leak
mlx5_tun_entropy_refcount_inc() counts both VXLAN and L2-to-L3
tunnel reformat entries as entropy-enabling users. The matching
decrement path only handled VXLAN, leaving L2-to-L3 tunnel entries
counted after release.
Handle MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL in
mlx5_tun_entropy_refcount_dec() as well so the enabling entry
refcount remains balanced.
Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260703141423.1723-1-lirongqing@baidu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty.
Paolo Abeni [Thu, 9 Jul 2026 08:36:14 +0000 (10:36 +0200)]
Merge branch 'fix-mana-rx-with-bounce-buffering'
Dexuan Cui says:
====================
Fix MANA RX with bounce buffering
With swiotlb=force, the MANA NIC fails to work properly due to commit 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead
of full pages to improve memory efficiency.").
This happens because, with the standard MTU=1500, the aforementioned
commit uses page pool frags with PP_FLAG_DMA_MAP, but fails to call
page_pool_dma_sync_for_cpu() to sync the received packet for CPU acces
before handing the RX buffer to the stack.
Here patch #2 adds the required page_pool_dma_sync_for_cpu().
Patch #1 validates the packet length reported by the NIC. With patch #2,
page_pool_dma_sync_for_cpu() uses the packet length, so we don't want
to blindly trust the packet length, just in case.
There is no change between v2 and v3.
v3 just swaps the order of the 2 patches in v2, as suggested by Simon [3].
Dexuan Cui [Thu, 2 Jul 2026 04:12:37 +0000 (21:12 -0700)]
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dexuan Cui [Thu, 2 Jul 2026 04:12:36 +0000 (21:12 -0700)]
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted.
Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wang Yan [Thu, 2 Jul 2026 02:59:49 +0000 (10:59 +0800)]
selftests/net: fix EVP_MD_CTX leak in tcp_mmap
In tcp_mmap.c, both child_thread() and main() allocate an EVP_MD_CTX
via EVP_MD_CTX_new() when integrity checking is enabled, but neither
function releases the context. child_thread() misses the free in its
common cleanup block, and main() returns without freeing the context.
This results in a SHA256 context leak on every run that uses the
‑i (integrity) option. Add the missing EVP_MD_CTX_free() calls to
the appropriate cleanup paths to fix the leak.
Merge tag 'hid-for-linus-2026070801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- OOB, UAF, NULL-deref fixes in core and picolcd, logitech, letsketch,
appleir and multitouch drivers (Georgiy Osokin, HyeongJun An, Lee
Jones, Manish Khadka, Maoyi Xie and Trung Nguyen)
- fix for integer wraparound (and corresponding regression selftest) in
hid-bpf (Yiyang Chen)
* tag 'hid-for-linus-2026070801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: multitouch: test a large ContactCountMaximum
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
selftests/hid: Cover hid_bpf_get_data() size overflow
selftests/hid: Load only requested struct_ops maps
HID: bpf: Fix hid_bpf_get_data() range check
HID: lg-g15: cancel pending work on remove to fix a use-after-free
HID: logitech-dj: Fix maxfield check in DJ short report validation
HID: core: Fix OOB read in hid_get_report for numbered reports
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
HID: appleir: fix UAF on pending key_up_timer in remove()
HID: letsketch: fix UAF on inrange_timer at driver unbind
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers.
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset.
Fixes: 2906f66a5682 ("ipvs: SCTP Trasport Loadbalancing Support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20260705123040.35755-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
ipvs: use parsed transport offset in TCP state lookup
TCP state handling reparses the skb to find the TCP header. For IPv6 it
uses sizeof(struct ipv6hdr), while the surrounding IPVS code already
parsed the packet with ip_vs_fill_iph_skb() and has the real
transport-header offset in iph.len.
This makes TCP state handling look at the wrong bytes when an IPv6
packet carries extension headers. Use the parsed transport offset passed
down from ip_vs_set_state() when reading the TCP header.
For IPv4 and for IPv6 packets without extension headers, the passed
offset matches the previous value.
Fixes: 0bbdd42b7efa6 ("IPVS: Extend protocol DNAT/SNAT and state handlers") Link: https://lore.kernel.org/netdev/20260705125659.37744-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
ipvs: pass parsed transport offset to state handlers
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set.
Fixes: 65249feb6b3d ("net: add support for skbs with unreadable frags") Cc: stable@vger.kernel.org Acked-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes: d30301ba4b07 ("netfilter: flowtable: Add IPIP tx sw acceleration") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn> Reported-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
netfilter: flowtable: use dst in this direction when pushing IPIP header
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage.
netfilter: ipset: allocate the proper memory for the generic hash structure
Because a single create function is emitted for every hash type,
from the IPv4 and IPv6 generic hash structure definitions the last
one, i.e. the IPv6 was in effect for IPv4 too. Use the proper size
when allocating the structure. Comment properly that because create()
refers to elements of the generic hash structure, all referred ones
must come before the IPv4/IPv6 dependent 'next' member.
netfilter: ipset: cleanup the add/del backlog when resize failed
Sashiko pointed out that the add/del backlog was not cleaned up
when resize failed. Fix it in the corresponding error path. Also,
make sure that the add/del backlog is htable-specific so when
resize creates a new htable, old/new backlog can't be mixed up.
netfilter: ipset: exclude gc when resize is in progress
Zhengchuan Liang and Eulgyu Kim reported that because resize
does not copy the comment extension into the resized set but
uses it's pointer, ongoing gc can free the extension in the
original set which then results stale pointer in the resized
one. The proposed patch was to recreate the extensions for
every element in the resized set. It is both expensive and
wastes memory, so better exclude gc when resizing in progress
detected: resizing will destroy the original set anyway,
so doing gc on it is unnecessary.
Introduce a new spinlock to exclude parallel gc and resize.
Because we just set and check a bool value, there's no need
for the parameter to be atomic_t and rename it for better
readability.
Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported by: Eulgyu Kim <eulgyukim@snu.ac.kr> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock.
netfilter: nft_lookup: fix catchall element handling with inverted lookups
nft_lookup_eval() decides whether a lookup matched (`found`) from the
direct set lookup and priv->invert before falling back to the
catchall element used by interval sets (e.g. nft_set_rbtree) for the
open-ended default range. Since `found` is never recomputed after
`ext` is replaced by the catchall lookup, inverted lookups
(NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the
catchall element, producing the wrong verdict. Fold the catchall
lookup into `ext` before computing `found`, matching the order
already used by nft_objref_map_eval().
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support") Signed-off-by: Tamaki Yanagawa <ty@000ty.net> Assisted-by: Claude:claude-sonnet-5 Signed-off-by: Florian Westphal <fw@strlen.de>
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place.
Xiang Mei [Sun, 5 Jul 2026 21:58:00 +0000 (14:58 -0700)]
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.
Xiang Mei [Sun, 5 Jul 2026 23:36:29 +0000 (16:36 -0700)]
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into the headroom.
The reassembler has done this unconditional add since it was introduced;
it was harmless while mac_header was a bare pointer, but wrong once
mac_header became a u16 offset whose unset state is the ~0U sentinel
tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c
does the same relocation and does guard the adjustment; mirror the
guard here.
====================
ipv4/ipv6: Fix UAF and memory leak in IGMP/MLD
This series addresses two potential UAF vulnerabilities
and memory leaks in the IPv4 IGMP and IPv6 MLD subsystems.
The first two patches fix a UAF where the packet receive path races with
device teardown. If the device refcount has already hit 0 (but the memory
is still held by RCU), incoming IGMP/MLD packets trying to schedule delayed
work or timers would call refcount_inc() on the 0 refcount, triggering a
warning and eventually leading to a UAF when the work runs after the device
has been freed. This is fixed by introducing safe hold helpers using
refcount_inc_not_zero(). In MLD, we also ensure we only enqueue the skb
if we successfully acquired the device reference, to avoid leaking skbs
when the device is being destroyed.
The third patch fixes memory leaks in IPv4 IGMP when timers are deleted or
stopped. When a timer is deleted (in igmp_mod_timer) or stopped (in
igmp_stop_timer) and not re-armed, the code dropped the group refcount using
refcount_dec(). However, if the group was concurrently removed from the list,
this decrement could drop the refcount to 0 without triggering the
cleanup/free path, leaking the group structure. This is fixed by using
ip_ma_put() instead, and deferring the put until after the lock is released.
====================
Eric Dumazet [Sun, 5 Jul 2026 18:17:56 +0000 (18:17 +0000)]
ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer()
When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped
in igmp_stop_timer(), the code currently decrements the reference counter
of the multicast list entry @im using refcount_dec(&im->refcnt).
However, both functions can be called from the RCU reader path:
- igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu()
- igmp_stop_timer() via igmp_rcv() -> igmp_heard_report()
If the group im was concurrently removed from the list by ip_mc_dec_group(),
its reference count might have already been decremented to 1.
In this case, timer_delete() succeeds, and refcount_dec() decrements
the refcount from 1 to 0. Since refcount_dec() does not free the object
when it hits 0 (unlike ip_ma_put()), the im structure is leaked.
Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt),
and deferring the put until after the spinlock is released.
Eric Dumazet [Sun, 5 Jul 2026 18:17:55 +0000 (18:17 +0000)]
ipv6: mcast: Fix potential UAF in MLD delayed work
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Eric Dumazet [Sun, 5 Jul 2026 18:17:54 +0000 (18:17 +0000)]
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
octeontx2-pf: check DMAC extraction support before filtering
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf98 ("octeontx2-pf: Add support for SR-IOV management functions") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Nitin Shetty J <nshettyj@marvell.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Samuel Moelius [Thu, 2 Jul 2026 00:07:59 +0000 (00:07 +0000)]
net/sched: cake: reject overhead values that underflow length
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments.
Paolo Abeni [Wed, 8 Jul 2026 09:10:21 +0000 (11:10 +0200)]
Merge tag 'for-net-2026-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_conn: Fix null ptr deref in hci_abort_conn()
- af_bluetooth: fix UAF in bt_accept_dequeue()
- L2CAP: validate option length before reading conf opt value
- L2CAP: cancel pending_rx_work before taking conn->lock
- L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
- L2CAP: fix tx ident leak for commands without a response
- SCO: Fix a race condition in sco_sock_timeout()
- ISO: avoid NULL deref of conn in iso_conn_big_sync()
- ISO: fix malformed ISO_END/CONT handling
- ISO: exclude RFU bits from ISO_SDU_Length
- MGMT: Fix adv monitor add failure cleanup
- MGMT: Fix UAF of hci_conn_params in add_device_complete
- bnep: pin L2CAP connection during netdev registration
- 6lowpan: avoid untracked enable work
- 6lowpan: hold L2CAP conn across debugfs control
- 6lowpan: Fix using chan->conn as indication to no remote netdev
- btintel_pcie: Refactor FLR to use device_reprobe()
- btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
- hci_uart: clear HCI_UART_SENDING when write_work is canceled
- bpa10x: avoid OOB read of revision string in bpa10x_setup()
* tag 'for-net-2026-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: fix tx ident leak for commands without a response
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
Bluetooth: ISO: exclude RFU bits from ISO_SDU_Length
Bluetooth: ISO: fix malformed ISO_END/CONT handling
Bluetooth: btintel_pcie: Refactor FLR to use device_reprobe()
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
Bluetooth: fix UAF in bt_accept_dequeue()
Bluetooth: bnep: pin L2CAP connection during netdev registration
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
Bluetooth: MGMT: Fix adv monitor add failure cleanup
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
Bluetooth: 6lowpan: avoid untracked enable work
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
Bluetooth: L2CAP: validate option length before reading conf opt value
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete
Bluetooth: 6lowpan: Fix using chan->conn as indication to no remote netdev
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
====================
net: mdio: select REGMAP_MMIO instead of depending on it
REGMAP_MMIO is a hidden (non-user-visible) tristate symbol. Using
depends on it is incorrect because there is no way for the user to
enable it directly. Change to select, which is the convention used
by every other driver in the tree that needs REGMAP_MMIO.
Fixes: 8057cbb8335c ("net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260702032653.1580616-1-rosenp@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: usb: lan78xx: disable VLAN filter in promiscuous mode
The hardware VLAN filter (RFE_CTL_VLAN_FILTER_) drops VLAN-tagged frames
whose VID has not been registered via lan78xx_vlan_rx_add_vid(). It is
left enabled in promiscuous mode, so packet capture (e.g. tcpdump or
Wireshark) does not see tagged frames for unregistered VIDs.
Clear the filter while the interface is promiscuous and restore it from
NETIF_F_HW_VLAN_CTAG_FILTER otherwise. Enforce the same condition in
lan78xx_set_features() so netdev_update_features() cannot re-enable the
filter while promiscuous.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Enrico Pozzobon <enrico.pozzobon@dissecto.com> Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de> Link: https://patch.msgid.link/20260701-lan78xx-vlan-promisc-v3-1-232266d32743@dissecto.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ipv4: igmp: remove multicast group from hash table on device destruction
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup.
net: rnpgbe: fix mailbox endianness and remove pointer casts
The rnpgbe mailbox exchanges data through 32-bit MMIO registers in
little-endian wire format. The original code had two problems:
1. FW structs (with __le16/__le32 fields) were cast to (u32 *)
before reaching the mailbox transport, hiding the endian
annotations from sparse.
2. No cpu_to_le32()/le32_to_cpu() conversion was done between
CPU-endian MMIO values and the little-endian payload, causing
data corruption on big-endian systems.
Fix by adding the missing byte-order conversions in the transport
layer and introducing union wrappers (mbx_fw_cmd_req_u,
mbx_fw_cmd_reply_u) that overlay each FW struct with a __le32
dwords[] array. Callers fill named fields using cpu_to_le16/32(),
then pass dwords[] to the transport, which now takes explicit
__le32 * instead of u32 *. This eliminates all pointer casts on
the mailbox data path and lets sparse verify the conversions.
Chuck Lever [Tue, 30 Jun 2026 19:15:51 +0000 (15:15 -0400)]
net/tls: Consume empty data records in tls_sw_read_sock()
A peer may send a zero-length TLS application_data record; TLS 1.3
explicitly permits these as a traffic-analysis countermeasure (RFC
8446, Section 5.1). After decryption such a record has full_len ==
0. tls_sw_read_sock() hands it to the read_actor, which has no
payload to consume and returns zero. The loop treats a zero return
as backpressure (used <= 0), requeues the skb at the head of
rx_list, and stops. rx_list is serviced head-first on the next
call, so the empty record is dequeued, fails the same way, and is
requeued again; every later record on the connection is blocked
behind it.
tls_sw_recvmsg() does not stall on this: a zero-length data record
copies nothing and falls through to consume_skb(). Mirror that in
the read_sock() path by recognizing an empty data record before
the actor runs, consuming it, and continuing.
Fixes: 662fbcec32f4 ("net/tls: implement ->read_sock()") Signed-off-by: Chuck Lever <cel@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20260630191551.875664-1-cel@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'mm-hotfixes-stable-2026-07-06-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 17 are for MM. 12 are cc:stable and the remaining 8
address post-7.1 issues or aren't considered suitable for backporting.
Two patches from SJ addresses a couple of quite old DAMON issues. And
two patches from Yichong Chen fixes tools/virtio build issues. The
remaining patches are singletons"
* tag 'mm-hotfixes-stable-2026-07-06-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
tools/include: include stdint.h for SIZE_MAX in overflow.h
tools/virtio: add missing compat definitions for vhost_net_test
mm: do file ownership checks with the proper mount idmap
samples/damon/mtier: fail early if address range parameters are invalid
mm: a second pagecache maintainer
mm/damon: add a kernel-doc comment for damon_ctx->rnd_state
mm/damon: add a kernel-doc comment for damon_ctx->probes
mailmap: add entries for Radu Rendec
selftests/mm: hmm-tests: include linux/mman.h to access MADV_COLLAPSE
selftests/mm: pagemap_ioctl: use the correct page size for transact_test()
fs/proc: fix KPF_KSM reported for all anonymous pages
mm: page_ext: add count limit to page_ext_iter_next to prevent invalid PFN access
mm/damon/ops-common: handle extreme intervals in damon_hot_score()
MAINTAINERS: add Lance as an rmap reviewer
mm/compaction: handle free_pages_prepare() properly in compaction_free()
mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error
mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs()
mm: shrinker: fix NULL pointer dereference in debugfs
mm: shrinker: fix shrinker_info teardown race with expansion
selftests/mm: fix ksft_process_madv.sh test category
Stig Hornang [Fri, 12 Jun 2026 14:38:18 +0000 (16:38 +0200)]
Bluetooth: L2CAP: fix tx ident leak for commands without a response
Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding
TX ident") changed ident allocation to use an IDA, releasing idents in
l2cap_put_ident() when the matching response command is received.
But identifiers allocated for commands that have no response defined
are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for
the lifetime of an LE CoC channel, so a peer streaming data to the
host exhausts the 1-255 ident range after 254 credit packets. From
then on l2cap_get_ident() fails:
kernel: Bluetooth: Unable to allocate ident: -28
and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0,
which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling
identifier 0x00 is an invalid identifier and shall never be used in
any command"). Remote stacks that validate the ident drop these
commands, never receive new credits, and the channel stalls
permanently. With default socket buffers this happens after roughly 0.5 MB
of received data (the exact amount depends on the socket receive buffer):
< ACL Data TX: Handle 2048 flags 0x00 dlen 12
LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4
Source CID: 64
Credits: 1
Release the ident immediately after sending L2CAP_LE_CREDITS since no
response will ever release it. Use a local variable instead of
chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on
(e.g. a pending reconfigure) is not overwritten by a credit packet.
Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so
idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released
when the response arrives.
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") Link: https://bugzilla.kernel.org/show_bug.cgi?id=221629 Assisted-by: Claude:claude-opus-4.8 Assisted-by: Fable:5 Signed-off-by: Stig Hornang <stig@hornang.me> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Weiming Shi [Wed, 1 Jul 2026 16:06:14 +0000 (09:06 -0700)]
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working.
Fixes: ddd68ec8f484 ("Bluetooth: bpa10x: Read revision information in setup stage") Reported-by: Xiang Mei <xmei5@asu.edu> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack
macro.
Fixes: 4de0fc599eb9 ("Bluetooth: Add definitions for CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends
too long ISO_END, we panic on skb_put. If controller sends too short
ISO_END we accept it.
Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check
skb->len properly before skb_put. Combine the ISO_CONT/END code paths
as they require the same initial checks. Reject too short ISO_END
packets.
Fixes: 84c24fb151fc ("Bluetooth: ISO: drop ISO_END frames received without prior ISO_START") Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Tue, 30 Jun 2026 16:59:19 +0000 (22:29 +0530)]
Bluetooth: btintel_pcie: Refactor FLR to use device_reprobe()
The FLR branch in btintel_pcie_reset_work() open-coded the entire
re-init sequence: btintel_pcie_release_hdev() (hci_unregister_dev +
hci_free_dev), pci_try_reset_function(), enable_interrupts /
config_msix / enable_bt / reset_ia / start_rx, then
btintel_pcie_setup_hdev() (hci_alloc_dev_priv + hci_register_dev).
Every probe() init step had to be kept in sync with this second
copy in the reset path, and any failure mid-sequence left state to
unwind by hand.
The PLDR path already delegates teardown and re-init to the PCI
core via device_reprobe(): .remove() destroys data through devres
and unregisters hdev, then .probe() rebuilds everything from
scratch. Apply the same model to FLR.
Introduce btintel_pcie_perform_flr() mirroring perform_pldr(). It
runs pci_try_reset_function() (required to avoid the device_lock
ABBA against btintel_pcie_remove(), which calls
disable_work_sync(&reset_work) while holding device_lock) followed
by device_reprobe(). On success, data is destroyed and a fresh
probe re-INIT_WORKs coredump_work with disable count 0, so
enable_work() must not be called; on failure, data is still alive
and the caller balances the earlier disable_work_sync(). The
contract is documented on the helper and reiterated at the
reset_work() call site.
reset_work() shrinks to interrupt/worker drain, dispatch on
reset_type, and the single asymmetry between the two paths. The
out_enable label, the manual unregister/register pair, and the
forward declaration of btintel_pcie_setup_hdev() are dropped.
No intended functional change; FLR and PLDR now share one
teardown contract.
Fixes: 256ab9520d15 ("Bluetooth: btintel_pcie: Support Function level reset") Assisted-by: GitHub-Copilot:claude-4.7-opus Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Siwei Zhang [Mon, 29 Jun 2026 13:49:58 +0000 (09:49 -0400)]
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.
Fixes: 8ffb929098a5 ("Bluetooth: Remove parent socket usage from l2cap_core.c") Cc: stable@kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Yousef Alhouseen [Sun, 28 Jun 2026 00:23:05 +0000 (02:23 +0200)]
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths.
Fixes: ab1513597c6c ("Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()") Reported-by: syzbot+674ff7e4d7fdfd572afc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=674ff7e4d7fdfd572afc Cc: stable@vger.kernel.org Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Yousef Alhouseen [Sun, 28 Jun 2026 00:50:58 +0000 (02:50 +0200)]
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference.
Fixes: 65f53e9802db ("Bluetooth: Access BNEP session addresses through L2CAP channel") Reported-by: syzbot+fed5dce4553262f3b35c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fed5dce4553262f3b35c Cc: stable@vger.kernel.org Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sungwoo Kim [Wed, 24 Jun 2026 21:33:04 +0000 (17:33 -0400)]
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
Fixes: e6720779ae61 ("Bluetooth: SCO: Use kref to track lifetime of sco_conn") Acked-by: Dave Tian <daveti@purdue.edu> Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes: a2a4dedf88ab ("Bluetooth: advmon offload MSFT add monitor") Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cen Zhang [Tue, 23 Jun 2026 16:12:59 +0000 (00:12 +0800)]
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cen Zhang [Tue, 23 Jun 2026 16:12:29 +0000 (00:12 +0800)]
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000
Fixes: 90305829635d ("Bluetooth: 6lowpan: Converting rwlocks to use RCU") Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Siwei Zhang [Mon, 15 Jun 2026 15:33:05 +0000 (11:33 -0400)]
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free.
Fixes: a13f316e90fd ("Bluetooth: hci_conn: Consolidate code for aborting connections") Cc: stable@vger.kernel.org Suggested-by: XIAO WU <xiaowu.417@qq.com> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Maoyi Xie [Wed, 17 Jun 2026 08:36:52 +0000 (16:36 +0800)]
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Suggested-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Sat, 20 Jun 2026 19:56:35 +0000 (00:56 +0500)]
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length.
Fixes: 7c9cbd0b5e38 ("Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Runyu Xiao [Wed, 17 Jun 2026 15:36:13 +0000 (23:36 +0800)]
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
reported:
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired.
Fixes: 7ab56c3a6ecc ("Bluetooth: Fix deadlock in l2cap_conn_del()") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Sun, 21 Jun 2026 16:23:05 +0000 (21:23 +0500)]
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc().
Fixes: 7a17308c17880d ("Bluetooth: iso: Fix circular lock in iso_conn_big_sync") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Samuel Page [Mon, 15 Jun 2026 15:09:22 +0000 (16:09 +0100)]
Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete
add_device_complete() runs from the hci_cmd_sync_work kworker, which
holds only hci_req_sync_lock and *not* hci_dev_lock. It calls
hci_conn_params_lookup() and then dereferences the returned object
(params->flags) without taking hci_dev_lock:
hci_conn_params_lookup() walks hdev->le_conn_params and is documented to
require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE
(remove_device()), which does run under hci_dev_lock, can call
hci_conn_params_free() to list_del() and kfree() the very object the
lookup returned, so the subsequent params->flags read touches freed
memory [0].
Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of
params->flags (and the matching event emission) so the lookup result
cannot be freed by a concurrent remove_device() before it is used,
honouring the locking contract of hci_conn_params_lookup().
[0]: (trailing page/memory-state dump trimmed)
BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388
Bluetooth: 6lowpan: Fix using chan->conn as indication to no remote netdev
b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding
conn ref") don't reset the chan->conn to NULL anymore making the bt#
netdev not be remove once the last l2cap_chan_del is removed.
Instead of restoring the original behavior this remove the logic of
keeping the interface after the last channel is removed because it
never worked as intended and the l2cap_chan_del always detach its
l2cap_conn which results in always removing the channel anyway.
Fixes: b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sat, 13 Jun 2026 18:43:37 +0000 (21:43 +0300)]
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush.
Eric Dumazet [Wed, 1 Jul 2026 12:23:29 +0000 (12:23 +0000)]
amt: fix size calculation in amt_get_size()
amt_get_size() incorrectly used sizeof(struct iphdr) for the sizes of
IFLA_AMT_DISCOVERY_IP, IFLA_AMT_REMOTE_IP, and IFLA_AMT_LOCAL_IP.
These attributes contain IPv4 addresses (__be32), not full IP headers.
Replace sizeof(struct iphdr) with sizeof(__be32) to avoid over-allocating
netlink message space.
Fixes: b9022b53adad ("amt: add control plane of amt interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260701122329.3562825-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiang Mei [Tue, 30 Jun 2026 18:32:27 +0000 (11:32 -0700)]
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done.
Fixes: d7b0e37c1ac1 ("net/smc: restructure CDC message reception") Reported-by: Weiming Shi <bestswngs@gmail.com> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei <xmei5@asu.edu> Link: https://patch.msgid.link/20260630183227.2044998-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Reported-by: zdi-disclosures@trendmicro.com Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260701161912.125355-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiang Mei [Tue, 30 Jun 2026 17:41:09 +0000 (10:41 -0700)]
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header.
Paolo Abeni [Mon, 6 Jul 2026 10:39:42 +0000 (12:39 +0200)]
Merge tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*, all
for ancient problems. Patch 7 raised drive-by sashiko findings,
but those are not related to the change itself.
1) Rebuild the nf_nat_sip data pointer to prevent stale access after SKB
reallocation. Restrict UDP mangling to UDP streams to avoid TCP packet
corruption.
2) Prevent undefined behavior in xt_u32 caused by invalid shift counts.
From Wyatt Feng.
3) Use u64 variables to prevent incorrect comparisons on links exceeding
34 Gbps in xt_rateest. From Feng Wu.
4) Cap the number of expectations per master during nfnetlink_cthelper
updates. From Pablo Neira Ayuso.
5) Mark malformed IPv6 extension headers for hotdrop in ip6tables.
From Zhixing Chen.
6) Skip the end element of an open interval during the get command when its
closest match is the interval's start element. Also from Pablo Neira Ayuso.
7) Fix PMTU calculation for GUE/GRE tunnels in IPVS during ICMP fragmentation
error handling. Include additional tunnel header length when computing the
new MTU. From Yizhou Zhao.
8) Reset full ip_vs_seq structures in ip_vs_conn_new. Also from Yizhou Zhao.
9) Reject invalid shift parameters in xt_connmark. Also from Wyatt Feng.
netfilter pull request nf-26-07-03
* tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_connmark: reject invalid shift parameters
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
ipvs: fix PMTU for GUE/GRE tunnel ICMP errors
netfilter: nft_set_rbtree: get command skips end element with open interval
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master on updates
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
netfilter: xt_u32: reject invalid shift counts
netfilter: nf_nat_sip: reload possible stale data pointer
====================
Nirmoy Das [Tue, 30 Jun 2026 16:51:57 +0000 (09:51 -0700)]
selftests: net: make busywait timeout clock portable
loopy_wait() expects millisecond timestamps. However, Ubuntu Resolute
can use uutils date, where `date -u +%s%3N` returns seconds plus full
nanoseconds instead of a 3-digit millisecond field. This makes
busywait expire too early and can make vlan_bridge_binding.sh read a
stale operstate.
Shigeru Yoshida [Tue, 30 Jun 2026 16:46:20 +0000 (01:46 +0900)]
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe3650 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation.
Fixes: 8a8633978b84 ("qede: Add build_skb() support.") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/20260630164623.3152625-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sven Eckelmann [Thu, 2 Jul 2026 17:32:40 +0000 (19:32 +0200)]
batman-adv: dat: fix tie-break for candidate selection
The original version of the candidate selection for DAT attempted to
compare both candidate and max_orig_node to identify which has the smaller
MAC address. This comparison is required as tie-break when a hash collision
happened.
But the used function returned 0 when the function was not equal and a
non-zero value when it was equal. As result, the actually selected
node was dependent on the order of entries in the orig_hash and not
actually on the mac addresses. The last originator in the hash collision
would always win.
To have a proper ordering, it must diff the actual MAC address bytes and
reject the candidate when the diff is not smaller than 0.
Sven Eckelmann [Fri, 3 Jul 2026 18:47:45 +0000 (20:47 +0200)]
batman-adv: mcast: avoid OOB read of num_dests header
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header.
Cc: stable@vger.kernel.org Fixes: 07afe1ba288c ("batman-adv: mcast: implement multicast packet reception and forwarding") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Fri, 3 Jul 2026 19:04:03 +0000 (21:04 +0200)]
batman-adv: frag: fix primary_if leak on failed linearization
If the skb has a frag_list, it must be linearized before it can be split
using skb_split(). But when this step failed, it must not only free the skb
but also take care of the reference to the already found primary_if.
Cc: stable@vger.kernel.org Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: a063f2fba3fa ("batman-adv: Don't skb_split skbuffs with frag_list") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Fri, 3 Jul 2026 18:28:31 +0000 (20:28 +0200)]
batman-adv: frag: free unfragmentable packet
The caller of batadv_frag_send_packet() assume that the skb provided to the
function are always consumed. But the pre-check for an empty payload or the
zero fragment size returned an error without any further actions.
A failed pre-check must use the same error handling code as the rest of the
function.
Cc: stable@vger.kernel.org Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Fri, 3 Jul 2026 20:27:13 +0000 (22:27 +0200)]
batman-adv: tt: prevent TVLV OOB check overflow
A TT unicast TVLV contains the number of VLANs stored in it. This number is
an u16 and gets multiplied by the size of the struct
batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16
used to store the tt_vlan_len. All additional safety checks to prevent
out-of-bounds access of the TVLV buffer are invalid due to this overflow.
Using size_t prevents this overflow and ensures that the safety checks
compare against the actual buffer requirements.
Cc: stable@vger.kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Thu, 2 Jul 2026 19:06:23 +0000 (21:06 +0200)]
batman-adv: tt: avoid request storms during pending request
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms.
Cc: stable@vger.kernel.org Fixes: 335fbe0f5d25 ("batman-adv: tvlv - convert tt query packet to use tvlv unicast packets") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Sat, 4 Jul 2026 07:46:09 +0000 (09:46 +0200)]
batman-adv: clean untagged VLAN on netdev registration failure
When an mesh interface is registered, it creates an untagged struct
batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in
this process, another receiver of this notification can veto the
registration. The netdev registration will be aborted because of this veto.
The register_netdevice() call will try to clean up the net_device using
unregister_netdevice_queue() - which only uses the .priv_destructor to
free private resources. In this situation, .dellink will not be called.
The cleanup of the untagged batadv_meshif_vlan must thefore be done in the
destructor to avoid a leak of this object.
Cc: stable@vger.kernel.org Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Merge tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
Merge tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
Merge tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Ingo Molnar:
- Fix a futex-requeue deadlock detection regression (Thomas Gleixner)
* tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
Merge tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
Merge tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
net: microchip: vcap: fix races on the shared Super VCAP block
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock.
Shuangpeng Bai [Tue, 30 Jun 2026 19:48:56 +0000 (15:48 -0400)]
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model.
Merge tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix PKEY_VERIFYPROTK ioctl key type handling by removing the generic
key-length based type check with its wrong bit-size calculation, and
leaving protected key verification to the pkey handler
- Fix monwriter buffer reuse by rejecting records that change the data
length, preventing out of bounds user copy into the kernel buffer
* tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/monwriter: Reject buffer reuse with different data length
pkey: Move keytype check from pkey api to handler
Merge tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
Merge tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix several use-after-free races in durable handle reconnect,
supersede, and oplock handling
- Avoid holding the inode oplock lock while waiting for a lease break
acknowledgement. This removes delays of up to 35 seconds when cifs.ko
closes a deferred handle in response to a lease break
- Fix malformed security descriptor handling, including an undersized
DACL allocation issue and an out-of-bounds ACE SID read
- Fix memory leaks in security descriptor and DOS attribute xattr
encoding/decoding error paths
- Fix outstanding SMB2 credit leaks on aborted requests and correct the
QUERY_INFO credit charge calculation
- Fix hard-link creation without replacement being incorrectly rejected
when the handle lacks DELETE access
- Avoid unnecessary zeroing of large SMB2 read buffers
- Add an oplock list lockdep annotation and update the documented
support status for durable handles and SMB3.1.1 compression
- Durable handle fixes to address ownership and lifetime races during
reconnect, session teardown, oplock handling, and superseding opens,
preventing stale session and file references from being used by
concurrent operations
* tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix app-instance durable supersede session UAF
ksmbd: snapshot previous oplock state before durable checks
ksmbd: close superseded durable handles through refcount handoff
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
smb/server: do not require delete access for non-replacing links
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
ksmbd: doc: update feature support status for durable handles and compression
ksmbd: annotate oplock list traversals under m_lock
ksmbd: fix outstanding credit leak on abort and error paths
ksmbd: fix credit charge calculation for SMB2 QUERY_INFO
ksmbd: avoid zeroing the read buffer in smb2_read()
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
ksmbd: reject undersized DACLs before parsing ACEs
ksmbd: fix n.data memory leak in ksmbd_vfs_set_dos_attrib_xattr
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
Merge tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
Merge tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI TAD (Time and Alarm
Device) driver introduced by one of its previous updates and
get rid of the ugly #ifdef __KERNEL__ conditional compilation
in acpi_ut_safe_strncpy() by redefining that function as an
alias for strscpy_pad():
- Add a missing ACPI_TAD_AC_WAKE capability check omitted by mistake
to the ACPI TAD driver (Xu Rao)
- Define acpi_ut_safe_strncpy() as an alias for strscpy_pad()
which is viable because that function is only called from kernel
code (Rafael Wysocki)"
* tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Define acpi_ut_safe_strncpy() as strscpy_pad() alias
ACPI: TAD: Check AC wake capability before enabling wakeup
Merge tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a crash when a kretprobe reads from the stack
- Fix an issue with the build-time mcount sorter that broke ftrace
- Fix the rv32 IRQ stack frame padding to match the ABI
- Only defer IOMMU configuration during initialization. This avoids an
issue where IOMMU configuration could be indefinitely deferred
- Add the missing build salt to the vDSO
- Now that RISC-V systems with higher numbers of cores are starting to
become available, raise NR_CPUS for RISC-V to 256
- Clean up some warnings from sparse caused by the RISC-V-optimized
RAID6 code
- Clean up our __cpu_up() code with a few minor fixes
* tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: probes: save original sp in rethook trampoline
riscv: Fix 32-bit call_on_irq_stack() frame pointer ABI
scripts/sorttable: Handle RISC-V patchable ftrace entries
riscv: smp: use secs_to_jiffies in __cpu_up
ACPI: RIMT: Only defer the IOMMU configuration in init stage
riscv: Add build salt to the vDSO
raid6: fix raid6_recov_rvv symbol undeclared warning
raid6: fix riscv symbol undeclared warnigns
riscv: Raise default NR_CPUS for 64BIT to 256
Merge tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Credit fix
- Fix alignment issue in parse_posix_ctxt
- SID parsing fix
* tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing credit release on failure in cifs_issue_read()
cifs: update internal module version number
smb: client: use unaligned reads in parse_posix_ctxt()
smb: client: harden POSIX SID length parsing
====================
net/mlx5e: Fix crashes in dynamic per-channel stats and HV VHCA agent
Since per-channel stats were converted to be allocated and published
lazily at first channel open in commit fa691d0c9c08 ("net/mlx5e:
Allocate per-channel stats dynamically at first usage"),
priv->channel_stats[] and priv->stats_nch are filled in
incrementally during interface bring-up. This opened a window in
which the various stats readers - most of them reachable from
userspace via netlink/netdev stats queries - can race with
mlx5e_open_channel() on another CPU and observe partially
initialized state. The HV VHCA stats agent, which is created
before the channels are opened, hits related problems of its own.
projects / thirdparty / kernel / linux.git / log
