arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp
Add opp-peak-kBps bindings to the GPU opp table, listing the peak
GPU -> DDR bandwidth requirement for each opp level. This will be
used to scale the DDR bandwidth along with the GPU frequency dynamically.
This patch adds the interconnects property for the gpu node and the
opp-peak-kBps property to the opps of the gpu opp table. This should
help enable DDR bandwidth scaling dynamically and proportionally to the
GPU frequency.
arm64: dts: qcom: sc7180: Add support for context losing replicator
Add "qcom,replicator-loses-context" property to the replicator
in Always-on domain in SC7180 SoC to enable coresight replicator
driver to handle this variation of replicator designs.
arm64: dts: qcom: sc7180: Add support to skip powering up of ETM
Add "qcom,skip-power-up" property to skip powering up ETM
on SC7180 SoC to workaround a hardware errata where CPU
watchdog counter is stopped when ETM power up bit is set
(i.e., when TRCPDCR.PU = 1).
arm64: dts: qcom: sdm845: Support ETMv4 power management
Add "arm,coresight-loses-context-with-cpu" property to coresight
ETM nodes to avoid failure of trace session because of losing
context on entering deep idle states.
Sibi Sankar [Thu, 16 Jul 2020 19:17:46 +0000 (00:47 +0530)]
arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
All the platforms using SC7180 SoC are expected to have the wlan firmware
memory statically mapped by the Trusted Firmware. Hence move back the
qcom,msa-fixed-perm property to the SoC dtsi.
Reviewed-by: Douglas Anderson <dianders@chromium.org> Fixes: 7d484566087c0 ("arm64: dts: qcom: sc7180: Add missing properties for Wifi node") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200716191746.23196-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A3U/A5U both use a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.
The only difference between A3U/A5U is the way the sensor is
mounted on the mainboard - set the mount-matrix in the
device-specific device tree part to handle that difference.
Co-developed-by: Michael Srba <michael.srba@seznam.cz> Signed-off-by: Michael Srba <michael.srba@seznam.cz> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200622151751.408995-5-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stephan Gerhold [Mon, 22 Jun 2020 15:17:50 +0000 (17:17 +0200)]
arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
Commit c240f29e75e6 ("arm64: dts: set the default i2c pin drive strength to 16mA")
changed the default drive-strength for I2C pins in msm8916-pins.dtsi
to the maximum possible (16 mA).
While this makes sense for apq8016-sbc (DB410c) where you can connect
an arbitrary amount of I2C devices with level shifters etc, there is
no need to use a higher drive strength for other MSM8916 devices.
The minimum drive strength (2 mA) seems to be totally sufficient
to have everything work there.
With the short pinctrl nodes introduced earlier we can easily override
the drive-strength only for apq8016-sbc now. Use that and change
the default back to 2 mA.
i2c1_default/i2c5_default are already using 2 mA because they were
added separately later and are not used in apq8016-sbc.
So far we have been separating pinctrl entries into pinmux/pinconf.
It turns out it is also possible to combine them: The advantage is
that the device tree is overall more concise because the "pins"
to configure just need to be specified once, not separately for
pinmux/pinconf.
Using the simpler form only for new entries would be rather confusing.
This commit makes all MSM8916 device trees use the simplfied form.
Stephan Gerhold [Mon, 22 Jun 2020 15:17:48 +0000 (17:17 +0200)]
arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
It is helpful to be able to see all hardware components in one part
of the device tree, without having to scroll over the large amount
of regulator/pinctrl nodes. Keep those separated at the end of the file
to make navigation a bit easier.
This also makes it consistent with the order used in apq8016-sbc.dtsi.
Douglas Anderson [Thu, 25 Jun 2020 20:17:09 +0000 (13:17 -0700)]
arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
The WiFi supplies that were added recently can't have done anything
useful because they were missing the "-supply" suffix. Booting
without the "-supply" suffix would give these messages:
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found, using dummy regulator
Eric Biggers [Fri, 10 Jul 2020 07:20:10 +0000 (00:20 -0700)]
arm64: dts: sdm845: add Inline Crypto Engine registers and clock
Add the vendor-specific registers and clock for Qualcomm ICE (Inline
Crypto Engine) to the device tree node for the UFS host controller on
sdm845, so that the ufs-qcom driver will be able to use inline crypto.
Use a separate register range rather than extending the main UFS range
because there's a gap between the two, and the ICE registers are
vendor-specific. (Actually, the hardware claims that the ICE range also
includes the array of standard crypto configuration registers; however,
on this SoC the Linux kernel isn't permitted to access them directly.)
Rajendra Nayak [Tue, 30 Jun 2020 08:45:10 +0000 (14:15 +0530)]
arm64: dts: sc7180: Add OPP table for all qup devices
qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Rajendra Nayak [Tue, 30 Jun 2020 08:45:09 +0000 (14:15 +0530)]
arm64: dts: sdm845: Add OPP table for all qup devices
qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Sibi Sankar [Tue, 30 Jun 2020 08:19:38 +0000 (13:49 +0530)]
arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
Having a non-MSA (Modem Self-Authentication) SID bypassed breaks modem
sandboxing i.e if a transaction were to originate from it, the hardware
memory protections units (XPUs) would fail to flag them (any transaction
originating from modem are historically termed as an MSA transaction).
Drop the unused non-MSA modem SID on SC7180 SoCs and cheza so that SMMU
continues to block them.
Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Fixes: bec71ba243e95 ("arm64: dts: qcom: sc7180: Update Q6V5 MSS node") Fixes: 68aee4af5f620 ("arm64: dts: qcom: sdm845-cheza: Add iommus property") Cc: stable@vger.kernel.org Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200630081938.8131-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Bjorn Andersson [Mon, 22 Jun 2020 19:19:42 +0000 (12:19 -0700)]
arm64: dts: qcom: sdm845: Add IMEM and PIL info region
Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Bjorn Andersson [Mon, 22 Jun 2020 19:19:41 +0000 (12:19 -0700)]
arm64: dts: qcom: qcs404: Add IMEM and PIL info region
Add a simple-mfd representing IMEM on QCS404 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Sibi Sankar [Fri, 26 Jun 2020 19:08:08 +0000 (00:38 +0530)]
arm64: dts: qcom: sc7180: Add cpu OPP tables
Add OPP tables required to scale DDR/L3 per freq-domain on SC7180 SoCs.
Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200626190808.8716-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Tue, 23 Jun 2020 22:48:09 +0000 (00:48 +0200)]
arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id
Add properties required for the bootloader to select
the correct bootloader blob. They have been removed from
the SoC device tree as they should be set on a per-device
basis.
Konrad Dybcio [Tue, 23 Jun 2020 22:48:00 +0000 (00:48 +0200)]
arm64: dts: qcom: msm8994: Modernize the DTS style
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- qcom,smem -> smem
- remove unit-address from smem
- retire msm8994-pins.dtsi
- add some of the missing pins
- make comments C-style
Bjorn Andersson [Mon, 22 Jun 2020 22:27:42 +0000 (15:27 -0700)]
arm64: dts: qcom: sm8250-mtp: Drop PM8150 ldo11
PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels,
rather than as a regulator. As such it's available from the rpmhpd as
the SM8250_LCX power domain.
Martin Botka [Mon, 22 Jun 2020 19:25:56 +0000 (21:25 +0200)]
arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform)
Add device tree support for the Sony Xperia 10 and 10
Plus smartphones. They are all based on the Sony Ganges
platform (sdm630/636) and share a lot of common code.
The differences are really minor, so a Ganges-common DTSI
has been created to reduce clutter.
10 - Kirin
10 Plus - Mermaid
This platform is based on SoMC Nile, but there are some
major differences when it comes to pin configuration and
panel setup (among others).
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Martin Botka <martin.botka1@gmail.com> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Tested-by: Martin Botka <martin.botka1@gmail.com> Link: https://lore.kernel.org/r/20200622192558.152828-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Mon, 22 Jun 2020 19:25:55 +0000 (21:25 +0200)]
arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)
Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.
Konrad Dybcio [Mon, 22 Jun 2020 19:25:54 +0000 (21:25 +0200)]
arm64: dts: qcom: sdm630: Add sdm630 dts file
Add devicetree files for SDM630 SoC and its pin configuration.
This commit adds basic nodes like cpu, psci and other required
configuration for booting up from eMMC to the serial console.
Dmitry Baryshkov [Sun, 21 Jun 2020 19:28:24 +0000 (22:28 +0300)]
arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones
Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.
Amit Kucheria [Tue, 9 Jun 2020 06:44:55 +0000 (12:14 +0530)]
arm64: dts: qcom: sm8150: Add thermal zones and throttling support
sm8150 has 27 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Stephan Gerhold [Fri, 5 Jun 2020 18:59:16 +0000 (20:59 +0200)]
arm64: dts: qcom: apq8016-sbc: Replace spaces with tabs
apq8016-sbc.dtsi uses spaces on some lines instead of tabs.
Make this consistent by converting them to tabs.
Also remove some redundant comments from the DAI link definitions
- this is already visible from the comment block before the "sound"
node or the device node entries itself.
Stephan Gerhold [Fri, 5 Jun 2020 18:59:15 +0000 (20:59 +0200)]
arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep
The original qcom kernel changed the PDM GPIOs to be pull-down
during sleep at some point. Reportedly this was done because
there was some "leakage at PDM outputs during sleep":
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Stephan Gerhold [Fri, 5 Jun 2020 18:59:13 +0000 (20:59 +0200)]
arm64: dts: qcom: msm8916: Set #address-cells for lpass
As of commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines
configurable"), lpass now supports children nodes to configure the
MI2S SD lines to use for one of the I2S ports. For example:
Jeffrey Hugo [Thu, 28 May 2020 14:51:35 +0000 (07:51 -0700)]
arm64: dts: qcom: msm8998-clamshell: Fix label on l15 regulator
The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes. Luckily, no one has used the label yet,
so lets fix it.
Jeffrey Hugo [Thu, 28 May 2020 14:48:14 +0000 (07:48 -0700)]
arm64: dts: qcom: msm8998-mtp: Fix label on l15 regulator
The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes. Luckily, no one has used the label yet,
so lets fix it.
Stephen Boyd [Thu, 21 May 2020 01:03:37 +0000 (18:03 -0700)]
arm64: dts: qcom: sc7180: Move mss node to the right place
The modem node has an address of 4080000 and thus should come after tlmm
and before gpu. Move the node to the right place to maintainer proper
address sort order.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Cc: Evan Green <evgreen@chromium.org> Cc: Sibi Sankar <sibis@codeaurora.org> Fixes: e14a15eba89a ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200521010337.229177-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Jonathan Marek [Sat, 23 May 2020 17:52:32 +0000 (13:52 -0400)]
arm64: dts: qcom: sm8250: change ufs node name to ufshc
The ufs-qcom driver checks that the name matches the androidboot.bootdevice
parameter provided by the bootloader, which uses the name ufshc. Without
this change UFS fails to probe.
I think this is broken behavior from the ufs-qcom driver, but using the
name ufshc is consistent with dts for sdm845/sm8150/etc.
Linus Torvalds [Sun, 14 Jun 2020 18:39:31 +0000 (11:39 -0700)]
Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
Thomas Cedeno [Tue, 9 Jun 2020 17:22:13 +0000 (10:22 -0700)]
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com> Signed-off-by: Micah Morton <mortonm@chromium.org>
Linus Torvalds [Sun, 14 Jun 2020 16:47:25 +0000 (09:47 -0700)]
Merge tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d715 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
net: ethernet: ti: ale: fix allmulti for nu type ale
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 13 Jun 2020 20:43:56 +0000 (13:43 -0700)]
Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
Linus Torvalds [Sat, 13 Jun 2020 20:32:40 +0000 (13:32 -0700)]
doc: don't use deprecated "---help---" markers in target docs
I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.
See commit a7f7f6248d97 ("treewide: replace '---help---' in Kconfig
files with 'help'")
Linus Torvalds [Sat, 13 Jun 2020 20:29:16 +0000 (13:29 -0700)]
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Linus Torvalds [Sat, 13 Jun 2020 20:17:49 +0000 (13:17 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
Linus Torvalds [Sat, 13 Jun 2020 20:12:38 +0000 (13:12 -0700)]
Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has quite some patches for you this time. I hope it is the move to
per-driver-maintainers which is now showing results. We will see.
The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
larger refactoring of the Designware, Tegra, and PXA drivers, the
Cadence driver supports being a slave now, and there is support to
instanciate SPD eeproms for well-known cases (which will be
user-visible because the i801 driver supports it), and some
devm_platform_ioremap_resource() conversions which blow up the
diffstat.
Note that I applied the Nuvoton driver quite late, so some minor fixup
patches arrived during the merge window. I chose to apply them right
away because they were trivial"
* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
i2c: Drop stray comma in MODULE_AUTHOR statements
i2c: npcm7xx: npcm_i2caddr[] can be static
MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
i2c: npcm7xx: Fix a couple of error codes in probe
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
i2c: npcm7xx: Remove unnecessary parentheses
i2c: npcm7xx: Add support for slave mode for Nuvoton
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
i2c: pxa: don't error out if there's no pinctrl
i2c: add 'single-master' property to generic bindings
i2c: designware: Add Baikal-T1 System I2C support
i2c: designware: Move reg-space remapping into a dedicated function
i2c: designware: Retrieve quirk flags as early as possible
i2c: designware: Convert driver to using regmap API
i2c: designware: Discard Cherry Trail model flag
i2c: designware: Add Baytrail sem config DW I2C platform dependency
i2c: designware: slave: Set DW I2C core module dependency
i2c: designware: Use `-y` to build multi-object modules
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
...
Linus Torvalds [Sat, 13 Jun 2020 20:09:38 +0000 (13:09 -0700)]
Merge tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
- a set of atomisp patches. They remove several abstraction layers, and
fixes clang and gcc warnings (that were hidden via some macros that
were disabling 4 or 5 types of warnings there). There are also some
important fixes and sensor auto-detection on newer BIOSes via ACPI
_DCM tables.
- some fixes
* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
media: rkvdec: Fix H264 scaling list order
media: v4l2-ctrls: Unset correct HEVC loop filter flag
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
media: v4l2-subdev.rst: correct information about v4l2 events
media: s5p-mfc: Properly handle dma_parms for the allocated devices
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
media: cedrus: Implement runtime PM
media: cedrus: Program output format during each run
media: atomisp: improve ACPI/DMI detection logs
media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: Revert "media: atomisp: Add some ACPI detection info"
media: atomisp: improve sensor detection code to use _DSM table
media: atomisp: get rid of an iomem abstraction layer
media: atomisp: get rid of a string_support.h abstraction layer
media: atomisp: use strscpy() instead of less secure variants
media: atomisp: set DFS to MAX if sensor doesn't report fps
media: atomisp: use different dfs failed messages
media: atomisp: change the detection of ISP2401 at runtime
media: atomisp: use macros from intel-family.h
media: atomisp: don't set hpll_freq twice with different values
...
Linus Torvalds [Sat, 13 Jun 2020 20:04:36 +0000 (13:04 -0700)]
Merge tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Small collection of cleanups to rework usage of ->queuedata and the
GUID api"
* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: stop using ->queuedata
nvdimm/btt: stop using ->queuedata
nvdimm/blk: stop using ->queuedata
libnvdimm: Replace guid_copy() with import_guid() where it makes sense
Linus Torvalds [Sat, 13 Jun 2020 19:44:30 +0000 (12:44 -0700)]
Merge tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single iomap bug fix for a variable type mistake on 32-bit
architectures, fixing an integer overflow problem in the unshare
actor"
* tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Fix unsharing of an extent >2GB on a 32-bit machine
projects / thirdparty / kernel / linux.git / log
