re PR target/54407 (FAIL: 30_threads/condition_variable/54185.cc execution test program timed out on powerpc-apple-darwin9 and x86_64-apple-darwin10)
2012-04-06 Dominique d'Humieres <dominiq@lps.ens.fr>
Jack Howarth <howarth@bromo.med.uc.edu>
PR target/54407
* 30_threads/condition_variable/54185.cc: Skip for darwin < 11.
Co-Authored-By: Jack Howarth <howarth@bromo.med.uc.edu>
From-SVN: r209152
Daily bump.
From-SVN: r209136
backport: extend.texi (PowerPC AltiVec/VSX Built-in Functions): Document vec_vgbbd.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port from main line:
2014-04-01 Michael Meissner <meissner@linux.vnet.ibm.com>
* doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions):
Document vec_vgbbd.
From-SVN: r209117
backport: re PR target/60735 (GCC targeting E500 with SPE has errors with the _Decimal64 type)
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port mainline subversion id 209025.
2014-04-02 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/60735
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): If we have
software floating point or no floating point registers, do not
allow any type in the FPRs. Eliminate a test for SPE SIMD types
in GPRs that occurs after we tested for GPRs that would never be
true.
* config/rs6000/rs6000.md (mov<mode>_softfloat32, FMOVE64):
Rewrite tests to use TARGET_DOUBLE_FLOAT and TARGET_E500_DOUBLE,
since the FMOVE64 type is DFmode/DDmode. If TARGET_E500_DOUBLE,
specifically allow DDmode, since that does not use the SPE SIMD
instructions.
From-SVN: r209116
backport: rs6000.c (IN_NAMED_SECTION): New macro.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r205308
2013-11-23 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.c (IN_NAMED_SECTION): New macro.
(rs6000_xcoff_select_section): Place decls with stricter alignment
into named sections.
(rs6000_xcoff_unique_section): Allow unique sections for
uninitialized data with strict alignment.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-04-05 David Edelsohn <dje.gcc@gmail.com>
* gcc.target/powerpc/sd-vsx.c: Skip on AIX.
* gcc.target/powerpc/sd-pwr6.c: Same.
From-SVN: r209115
backport: vector.md (VEC_L): Add V1TI mode to vector types.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port from trunk
2014-03-12 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/vector.md (VEC_L): Add V1TI mode to vector types.
(VEC_M): Likewise.
(VEC_N): Likewise.
(VEC_R): Likewise.
(VEC_base): Likewise.
(mov<MODE>, VEC_M modes): If we are loading TImode into VSX
registers, we need to swap double words in little endian mode.
* config/rs6000/rs6000-modes.def (V1TImode): Add new vector mode
to be a container mode for 128-bit integer operations added in ISA
2.07. Unlike TImode and PTImode, the preferred register set is
the Altivec/VMX registers for the 128-bit operations.
* config/rs6000/rs6000-protos.h (rs6000_move_128bit_ok_p): Add
declarations.
(rs6000_split_128bit_ok_p): Likewise.
* config/rs6000/rs6000-builtin.def (BU_P8V_AV_3): Add new support
macros for creating ISA 2.07 normal and overloaded builtin
functions with 3 arguments.
(BU_P8V_OVERLOAD_3): Likewise.
(VPERM_1T): Add support for V1TImode in 128-bit vector operations
for use as overloaded functions.
(VPERM_1TI_UNS): Likewise.
(VSEL_1TI): Likewise.
(VSEL_1TI_UNS): Likewise.
(ST_INTERNAL_1ti): Likewise.
(LD_INTERNAL_1ti): Likewise.
(XXSEL_1TI): Likewise.
(XXSEL_1TI_UNS): Likewise.
(VPERM_1TI): Likewise.
(VPERM_1TI_UNS): Likewise.
(XXPERMDI_1TI): Likewise.
(SET_1TI): Likewise.
(LXVD2X_V1TI): Likewise.
(STXVD2X_V1TI): Likewise.
(VEC_INIT_V1TI): Likewise.
(VEC_SET_V1TI): Likewise.
(VEC_EXT_V1TI): Likewise.
(EQV_V1TI): Likewise.
(NAND_V1TI): Likewise.
(ORC_V1TI): Likewise.
(VADDCUQ): Add support for 128-bit integer arithmetic instructions
added in ISA 2.07. Add both normal 'altivec' builtins, and the
overloaded builtin.
(VADDUQM): Likewise.
(VSUBCUQ): Likewise.
(VADDEUQM): Likewise.
(VADDECUQ): Likewise.
(VSUBEUQM): Likewise.
(VSUBECUQ): Likewise.
* config/rs6000/rs6000-c.c (__int128_type): New static to hold
__int128_t and __uint128_t types.
(__uint128_type): Likewise.
(altivec_categorize_keyword): Add support for vector __int128_t,
vector __uint128_t, vector __int128, and vector unsigned __int128
as a container type for TImode operations that need to be done in
VSX/Altivec registers.
(rs6000_macro_to_expand): Likewise.
(altivec_overloaded_builtins): Add ISA 2.07 overloaded functions
to support 128-bit integer instructions vaddcuq, vadduqm,
vaddecuq, vaddeuqm, vsubcuq, vsubuqm, vsubecuq, vsubeuqm.
(altivec_resolve_overloaded_builtin): Add support for V1TImode.
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): Add support
for V1TImode, and set up preferences to use VSX/Altivec
registers. Setup VSX reload handlers.
(rs6000_debug_reg_global): Likewise.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_preferred_simd_mode): Likewise.
(vspltis_constant): Do not allow V1TImode as easy altivec
constants.
(easy_altivec_constant): Likewise.
(output_vec_const_move): Likewise.
(rs6000_expand_vector_set): Convert V1TImode set and extract to
simple move.
(rs6000_expand_vector_extract): Likewise.
(reg_offset_addressing_ok_p): Setup V1TImode to use VSX reg+reg
addressing.
(rs6000_const_vec): Add support for V1TImode.
(rs6000_emit_le_vsx_load): Swap double words when loading or
storing TImode/V1TImode.
(rs6000_emit_le_vsx_store): Likewise.
(rs6000_emit_le_vsx_move): Likewise.
(rs6000_emit_move): Add support for V1TImode.
(altivec_expand_ld_builtin): Likewise.
(altivec_expand_st_builtin): Likewise.
(altivec_expand_vec_init_builtin): Likewise.
(altivec_expand_builtin): Likewise.
(rs6000_init_builtins): Add support for V1TImode type. Add
support for ISA 2.07 128-bit integer builtins. Define type names
for the VSX/Altivec vector types.
(altivec_init_builtins): Add support for overloaded vector
functions with V1TImode type.
(rs6000_preferred_reload_class): Prefer Altivec registers for
V1TImode.
(rs6000_move_128bit_ok_p): Move 128-bit move/split validation to
external function.
(rs6000_split_128bit_ok_p): Likewise.
(rs6000_handle_altivec_attribute): Create V1TImode from vector
__int128_t and vector __uint128_t.
* config/rs6000/vsx.md (VSX_L): Add V1TImode to vector iterators
and mode attributes.
(VSX_M): Likewise.
(VSX_M2): Likewise.
(VSm): Likewise.
(VSs): Likewise.
(VSr): Likewise.
(VSv): Likewise.
(VS_scalar): Likewise.
(VS_double): Likewise.
(vsx_set_v1ti): New builtin function to create V1TImode from
TImode.
* config/rs6000/rs6000.h (TARGET_VADDUQM): New macro to say
whether we support the ISA 2.07 128-bit integer arithmetic
instructions.
(ALTIVEC_OR_VSX_VECTOR_MODE): Add V1TImode.
(enum rs6000_builtin_type_index): Add fields to hold V1TImode
and TImode types for use with the builtin functions.
(V1TI_type_node): Likewise.
(unsigned_V1TI_type_node): Likewise.
(intTI_type_internal_node): Likewise.
(uintTI_type_internal_node): Likewise.
* config/rs6000/altivec.md (UNSPEC_VADDCUQ): New unspecs for ISA
2.07 128-bit builtin functions.
(UNSPEC_VADDEUQM): Likewise.
(UNSPEC_VADDECUQ): Likewise.
(UNSPEC_VSUBCUQ): Likewise.
(UNSPEC_VSUBEUQM): Likewise.
(UNSPEC_VSUBECUQ): Likewise.
(VM): Add V1TImode to vector mode iterators.
(VM2): Likewise.
(VI_unit): Likewise.
(altivec_vadduqm): Add ISA 2.07 128-bit binary builtins.
(altivec_vaddcuq): Likewise.
(altivec_vsubuqm): Likewise.
(altivec_vsubcuq): Likewise.
(altivec_vaddeuqm): Likewise.
(altivec_vaddecuq): Likewise.
(altivec_vsubeuqm): Likewise.
(altivec_vsubecuq): Likewise.
* config/rs6000/rs6000.md (FMOVE128_GPR): Add V1TImode to vector
mode iterators.
(BOOL_128): Likewise.
(BOOL_REGS_OUTPUT): Likewise.
(BOOL_REGS_OP1): Likewise.
(BOOL_REGS_OP2): Likewise.
(BOOL_REGS_UNARY): Likewise.
(BOOL_REGS_AND_CR0): Likewise.
* config/rs6000/altivec.h (vec_vaddcuq): Add support for ISA 2.07
128-bit integer builtin support.
(vec_vadduqm): Likewise.
(vec_vaddecuq): Likewise.
(vec_vaddeuqm): Likewise.
(vec_vsubecuq): Likewise.
(vec_vsubeuqm): Likewise.
(vec_vsubcuq): Likewise.
(vec_vsubuqm): Likewise.
* doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions):
Document vec_vaddcuq, vec_vadduqm, vec_vaddecuq, vec_vaddeuqm,
vec_subecuq, vec_subeuqm, vec_vsubcuq, vec_vsubeqm builtins adding
128-bit integer add/subtract to ISA 2.07.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port from trunk
2014-03-12 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/p8vector-int128-1.c: New test to test ISA
2.07 128-bit arithmetic.
* gcc.target/powerpc/p8vector-int128-2.c: Likewise.
* gcc.target/powerpc/timode_off.c: Restrict cpu type to power5,
due to when TImode is allowed in VSX registers, the allowable
address modes for TImode is just a single indirect address in
order for the value to be loaded and store in either GPR or VSX
registers. This affects the generated code, and it would cause
this test to fail, when such an option is used.
From-SVN: r209113
backport: rs6000-c.c (altivec_overloaded_builtins): Remove two duplicate entries.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r206443
2014-01-08 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Remove
two duplicate entries.
Backport from mainline r206494
2014-01-09 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* doc/invoke.texi: Add -maltivec={be,le} options, and document
default element-order behavior for -maltivec.
* config/rs6000/rs6000.opt: Add -maltivec={be,le} options.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Ensure
that -maltivec={le,be} implies -maltivec; disallow -maltivec=le
when targeting big endian, at least for now.
* config/rs6000/rs6000.h: Add #define of VECTOR_ELT_ORDER_BIG.
Backport from mainline r206541
2014-01-10 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000-builtin.def: Fix pasto for VPKSDUS.
Backport from mainline r206590
2014-01-13 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
Implement -maltivec=be for vec_insert and vec_extract.
Backport from mainline r206641
2014-01-15 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
* config/rs6000/altivec.md (mulv8hi3): Explicitly generate vmulesh
and vmulosh rather than call gen_vec_widen_smult_*.
(vec_widen_umult_even_v16qi): Test VECTOR_ELT_ORDER_BIG rather
than BYTES_BIG_ENDIAN to determine use of even or odd instruction.
(vec_widen_smult_even_v16qi): Likewise.
(vec_widen_umult_even_v8hi): Likewise.
(vec_widen_smult_even_v8hi): Likewise.
(vec_widen_umult_odd_v16qi): Likewise.
(vec_widen_smult_odd_v16qi): Likewise.
(vec_widen_umult_odd_v8hi): Likewise.
(vec_widen_smult_odd_v8hi): Likewise.
(vec_widen_umult_hi_v16qi): Explicitly generate vmuleub and
vmuloub rather than call gen_vec_widen_umult_*.
(vec_widen_umult_lo_v16qi): Likewise.
(vec_widen_smult_hi_v16qi): Explicitly generate vmulesb and
vmulosb rather than call gen_vec_widen_smult_*.
(vec_widen_smult_lo_v16qi): Likewise.
(vec_widen_umult_hi_v8hi): Explicitly generate vmuleuh and vmulouh
rather than call gen_vec_widen_umult_*.
(vec_widen_umult_lo_v8hi): Likewise.
(vec_widen_smult_hi_v8hi): Explicitly gnerate vmulesh and vmulosh
rather than call gen_vec_widen_smult_*.
(vec_widen_smult_lo_v8hi): Likewise.
Backport from mainline r207062
2014-01-24 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vec_perm_const_1): Remove
correction for little endian...
* config/rs6000/vsx.md (vsx_xxpermdi2_<mode>_1): ...and move it to
here.
Backport from mainline r207262
2014-01-29 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Use
CODE_FOR_altivec_vmrg*_direct rather than CODE_FOR_altivec_vmrg*.
* config/rs6000/vsx.md (vsx_mergel_<mode>): Adjust for
-maltivec=be with LE targets.
(vsx_mergeh_<mode>): Likewise.
* config/rs6000/altivec.md (UNSPEC_VMRG[HL]_DIRECT): New
unspecs.
(mulv8hi3): Use gen_altivec_vmrg[hl]w_direct.
(altivec_vmrghb): Replace with define_expand and new
*altivec_vmrghb_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrghb_direct): New define_insn.
(altivec_vmrghh): Replace with define_expand and new
*altivec_vmrghh_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrghh_direct): New define_insn.
(altivec_vmrghw): Replace with define_expand and new
*altivec_vmrghw_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrghw_direct): New define_insn.
(*altivec_vmrghsf): Adjust for endianness.
(altivec_vmrglb): Replace with define_expand and new
*altivec_vmrglb_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrglb_direct): New define_insn.
(altivec_vmrglh): Replace with define_expand and new
*altivec_vmrglh_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrglh_direct): New define_insn.
(altivec_vmrglw): Replace with define_expand and new
*altivec_vmrglw_internal insn; adjust for -maltivec=be with LE
targets.
(altivec_vmrglw_direct): New define_insn.
(*altivec_vmrglsf): Adjust for endianness.
(vec_widen_umult_hi_v16qi): Use gen_altivec_vmrghh_direct.
(vec_widen_umult_lo_v16qi): Use gen_altivec_vmrglh_direct.
(vec_widen_smult_hi_v16qi): Use gen_altivec_vmrghh_direct.
(vec_widen_smult_lo_v16qi): Use gen_altivec_vmrglh_direct.
(vec_widen_umult_hi_v8hi): Use gen_altivec_vmrghw_direct.
(vec_widen_umult_lo_v8hi): Use gen_altivec_vmrglw_direct.
(vec_widen_smult_hi_v8hi): Use gen_altivec_vmrghw_direct.
(vec_widen_smult_lo_v8hi): Use gen_altivec_vmrglw_direct.
Backport from mainline r207318
2014-01-30 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc/config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
gen_vsx_xxspltw_v4sf_direct instead of gen_vsx_xxspltw_v4sf;
remove element index adjustment for endian (now handled in vsx.md
and altivec.md).
(altivec_expand_vec_perm_const): Use
gen_altivec_vsplt[bhw]_direct instead of gen_altivec_vsplt[bhw].
* gcc/config/rs6000/vsx.md (UNSPEC_VSX_XXSPLTW): New unspec.
(vsx_xxspltw_<mode>): Adjust element index for little endian.
* gcc/config/rs6000/altivec.md (altivec_vspltb): Divide into a
define_expand and a new define_insn *altivec_vspltb_internal;
adjust for -maltivec=be on a little endian target.
(altivec_vspltb_direct): New.
(altivec_vsplth): Divide into a define_expand and a new
define_insn *altivec_vsplth_internal; adjust for -maltivec=be on a
little endian target.
(altivec_vsplth_direct): New.
(altivec_vspltw): Divide into a define_expand and a new
define_insn *altivec_vspltw_internal; adjust for -maltivec=be on a
little endian target.
(altivec_vspltw_direct): New.
(altivec_vspltsf): Divide into a define_expand and a new
define_insn *altivec_vspltsf_internal; adjust for -maltivec=be on
a little endian target.
Backport from mainline r207326
2014-01-30 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Remove
unused variable "field".
* config/rs6000/vsx.md (vsx_mergel_<mode>): Add missing DONE.
(vsx_mergeh_<mode>): Likewise.
* config/rs6000/altivec.md (altivec_vmrghb): Likewise.
(altivec_vmrghh): Likewise.
(altivec_vmrghw): Likewise.
(altivec_vmrglb): Likewise.
(altivec_vmrglh): Likewise.
(altivec_vmrglw): Likewise.
(altivec_vspltb): Add missing uses.
(altivec_vsplth): Likewise.
(altivec_vspltw): Likewise.
(altivec_vspltsf): Likewise.
Backport from mainline r207414
2014-02-02 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (UNSPEC_VSUMSWS_DIRECT): New unspec.
(altivec_vsumsws): Add handling for -maltivec=be with a little
endian target.
(altivec_vsumsws_direct): New.
(reduc_splus_<mode>): Call gen_altivec_vsumsws_direct instead of
gen_altivec_vsumsws.
Backport from mainline r207415
2014-02-02 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_le): Generalize
for vector types other than V16QImode.
* config/rs6000/altivec.md (altivec_vperm_<mode>): Change to a
define_expand, and call altivec_expand_vec_perm_le when producing
code with little endian element order.
(*altivec_vperm_<mode>_internal): New insn having previous
behavior of altivec_vperm_<mode>.
(altivec_vperm_<mode>_uns): Change to a define_expand, and call
altivec_expand_vec_perm_le when producing code with little endian
element order.
(*altivec_vperm_<mode>_uns_internal): New insn having previous
behavior of altivec_vperm_<mode>_uns.
Backport from mainline r207520
2014-02-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* altivec.md (UNSPEC_VPACK_UNS_UNS_MOD_DIRECT): New unspec.
(UNSPEC_VUNPACK_HI_SIGN_DIRECT): Likewise.
(UNSPEC_VUNPACK_LO_SIGN_DIRECT): Likewise.
(mulv8hi3): Use gen_altivec_vpkuwum_direct instead of
gen_altivec_vpkuwum.
(altivec_vpkpx): Test for VECTOR_ELT_ORDER_BIG instead of for
BYTES_BIG_ENDIAN.
(altivec_vpks<VI_char>ss): Likewise.
(altivec_vpks<VI_char>us): Likewise.
(altivec_vpku<VI_char>us): Likewise.
(altivec_vpku<VI_char>um): Likewise.
(altivec_vpku<VI_char>um_direct): New (copy of
altivec_vpku<VI_char>um that still relies on BYTES_BIG_ENDIAN, for
internal use).
(altivec_vupkhs<VU_char>): Emit vupkls* instead of vupkhs* when
target is little endian and -maltivec=be is not specified.
(*altivec_vupkhs<VU_char>_direct): New (copy of
altivec_vupkhs<VU_char> that always emits vupkhs*, for internal
use).
(altivec_vupkls<VU_char>): Emit vupkhs* instead of vupkls* when
target is little endian and -maltivec=be is not specified.
(*altivec_vupkls<VU_char>_direct): New (copy of
altivec_vupkls<VU_char> that always emits vupkls*, for internal
use).
(altivec_vupkhpx): Emit vupklpx instead of vupkhpx when target is
little endian and -maltivec=be is not specified.
(altivec_vupklpx): Emit vupkhpx instead of vupklpx when target is
little endian and -maltivec=be is not specified.
Backport from mainline r207521
2014-02-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (altivec_vsum2sws): Adjust code
generation for -maltivec=be.
(altivec_vsumsws): Simplify redundant test.
Backport from mainline r207525
2014-02-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Change
CODE_FOR_altivec_vpku[hw]um to
CODE_FOR_altivec_vpku[hw]um_direct.
* config/rs6000/altivec.md (vec_unpacks_hi_<VP_small_lc>): Change
UNSPEC_VUNPACK_HI_SIGN to UNSPEC_VUNPACK_HI_SIGN_DIRECT.
(vec_unpacks_lo_<VP_small_lc>): Change UNSPEC_VUNPACK_LO_SIGN to
UNSPEC_VUNPACK_LO_SIGN_DIRECT.
Backport from mainline r207814.
2014-02-16 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vsx.md (vsx_xxpermdi_<mode>): Handle little
endian targets.
Backport from mainline r207815.
2014-02-16 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (p8_vmrgew): Handle little endian
targets.
(p8_vmrgow): Likewise.
Backport from mainline r207919.
2014-02-19 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (vspltis_constant): Fix most significant
bit of zero.
Backport from mainline 208019
2014-02-21 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (altivec_lvxl): Rename as
*altivec_lvxl_<mode>_internal and use VM2 iterator instead of
V4SI.
(altivec_lvxl_<mode>): New define_expand incorporating
-maltivec=be semantics where needed.
(altivec_lvx): Rename as *altivec_lvx_<mode>_internal.
(altivec_lvx_<mode>): New define_expand incorporating -maltivec=be
semantics where needed.
(altivec_stvx): Rename as *altivec_stvx_<mode>_internal.
(altivec_stvx_<mode>): New define_expand incorporating
-maltivec=be semantics where needed.
(altivec_stvxl): Rename as *altivec_stvxl_<mode>_internal and use
VM2 iterator instead of V4SI.
(altivec_stvxl_<mode>): New define_expand incorporating
-maltivec=be semantics where needed.
* config/rs6000/rs6000-builtin.def: Add new built-in definitions
LVXL_V2DF, LVXL_V2DI, LVXL_V4SF, LVXL_V4SI, LVXL_V8HI, LVXL_V16QI,
LVX_V2DF, LVX_V2DI, LVX_V4SF, LVX_V4SI, LVX_V8HI, LVX_V16QI,
STVX_V2DF, STVX_V2DI, STVX_V4SF, STVX_V4SI, STVX_V8HI, STVX_V16QI,
STVXL_V2DF, STVXL_V2DI, STVXL_V4SF, STVXL_V4SI, STVXL_V8HI,
STVXL_V16QI.
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Replace
ALTIVEC_BUILTIN_LVX with ALTIVEC_BUILTIN_LVX_<MODE> throughout;
similarly for ALTIVEC_BUILTIN_LVXL, ALTIVEC_BUILTIN_STVX, and
ALTIVEC_BUILTIN_STVXL.
* config/rs6000/rs6000-protos.h (altivec_expand_lvx_be): New
prototype.
(altivec_expand_stvx_be): Likewise.
* config/rs6000/rs6000.c (swap_selector_for_mode): New function.
(altivec_expand_lvx_be): Likewise.
(altivec_expand_stvx_be): Likewise.
(altivec_expand_builtin): Add cases for
ALTIVEC_BUILTIN_STVX_<MODE>, ALTIVEC_BUILTIN_STVXL_<MODE>,
ALTIVEC_BUILTIN_LVXL_<MODE>, and ALTIVEC_BUILTIN_LVX_<MODE>.
(altivec_init_builtins): Add definitions for
__builtin_altivec_lvxl_<mode>, __builtin_altivec_lvx_<mode>,
__builtin_altivec_stvx_<mode>, and
__builtin_altivec_stvxl_<mode>.
Backport from mainline 208021
2014-02-21 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (altivec_vsumsws): Replace second
vspltw with vsldoi.
(reduc_uplus_v16qi): Use gen_altivec_vsumsws_direct instead of
gen_altivec_vsumsws.
Backport from mainline 208049
2014-02-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (altivec_lve<VI_char>x): Replace
define_insn with define_expand and new define_insn
*altivec_lve<VI_char>x_internal.
(altivec_stve<VI_char>x): Replace define_insn with define_expand
and new define_insn *altivec_stve<VI_char>x_internal.
* config/rs6000/rs6000-protos.h (altivec_expand_stvex_be): New
prototype.
* config/rs6000/rs6000.c (altivec_expand_lvx_be): Document use by
lve*x built-ins.
(altivec_expand_stvex_be): New function.
Backport from mainline
2014-02-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_emit_le_vsx_move): Relax assert
to permit subregs.
Backport from mainline
2014-02-25 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vector.md (*vector_unordered<mode>): Change split
to use canonical form for nor<mode>3.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r206590
2014-01-13 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/insert.c: New.
* gcc.dg/vmx/insert-be-order.c: New.
* gcc.dg/vmx/extract.c: New.
* gcc.dg/vmx/extract-be-order.c: New.
Backport from mainline r206641
2014-01-15 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
* gcc.dg/vmx/mult-even-odd.c: New.
* gcc.dg/vmx/mult-even-odd-be-order.c: New.
Backport from mainline r206926
2014-01-22 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/insert-vsx-be-order.c: New.
* gcc.dg/vmx/extract-vsx.c: New.
* gcc.dg/vmx/extract-vsx-be-order.c: New.
* gcc.dg/vmx/insert-vsx.c: New.
Backport from mainline r207262
2014-01-29 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/merge-be-order.c: New.
* gcc.dg/vmx/merge.c: New.
* gcc.dg/vmx/merge-vsx-be-order.c: New.
* gcc.dg/vmx/merge-vsx.c: New.
Backport from mainline r207318
2014-01-30 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/splat.c: New.
* gcc.dg/vmx/splat-vsx.c: New.
* gcc.dg/vmx/splat-be-order.c: New.
* gcc.dg/vmx/splat-vsx-be-order.c: New.
* gcc.dg/vmx/eg-5.c: Remove special casing for little endian.
* gcc.dg/vmx/sn7153.c: Add special casing for little endian.
Backport from mainline r207414
2014-02-02 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/vsums.c: New.
* gcc.dg/vmx/vsums-be-order.c: New.
Backport from mainline r207415
2014-02-02 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/3b-15.c: Remove special handling for little endian.
* gcc.dg/vmx/perm.c: New.
* gcc.dg/vmx/perm-be-order.c: New.
Backport from mainline r207520
2014-02-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/pack.c: New.
* gcc.dg/vmx/pack-be-order.c: New.
* gcc.dg/vmx/unpack.c: New.
* gcc.dg/vmx/unpack-be-order.c: New.
Backport from mainline r207521
2014-02-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/sum2s.c: New.
* gcc.dg/vmx/sum2s-be-order.c: New.
Backport from mainline 208019
2014-02-21 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/ld.c: New test.
* gcc.dg/vmx/ld-be-order.c: New test.
* gcc.dg/vmx/ld-vsx.c: New test.
* gcc.dg/vmx/ld-vsx-be-order.c: New test.
* gcc.dg/vmx/ldl.c: New test.
* gcc.dg/vmx/ldl-be-order.c: New test.
* gcc.dg/vmx/ldl-vsx.c: New test.
* gcc.dg/vmx/ldl-vsx-be-order.c: New test.
* gcc.dg/vmx/st.c: New test.
* gcc.dg/vmx/st-be-order.c: New test.
* gcc.dg/vmx/st-vsx.c: New test.
* gcc.dg/vmx/st-vsx-be-order.c: New test.
* gcc.dg/vmx/stl.c: New test.
* gcc.dg/vmx/stl-be-order.c: New test.
* gcc.dg/vmx/stl-vsx.c: New test.
* gcc.dg/vmx/stl-vsx-be-order.c: New test.
Backport from mainline 208021
2014-02-21 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/vsums.c: Check entire result vector.
* gcc.dg/vmx/vsums-be-order.c: Likewise.
Backport from mainline 208049
2014-02-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/lde.c: New test.
* gcc.dg/vmx/lde-be-order.c: New test.
* gcc.dg/vmx/ste.c: New test.
* gcc.dg/vmx/ste-be-order.c: New test.
Backport from mainline 208120
2014-02-25 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/ld-vsx.c: Don't use vec_all_eq.
* gcc.dg/vmx/ld-vsx-be-order.c: Likewise.
* gcc.dg/vmx/ldl-vsx.c: Likewise.
* gcc.dg/vmx/ldl-vsx-be-order.c: Likewise.
* gcc.dg/vmx/merge-vsx.c: Likewise.
* gcc.dg/vmx/merge-vsx-be-order.c: Likewise.
Backport from mainline 208321
2014-03-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/extract-vsx.c: Replace "vector long" with "vector
long long" throughout.
* gcc.dg/vmx/extract-vsx-be-order.c: Likewise.
* gcc.dg/vmx/insert-vsx.c: Likewise.
* gcc.dg/vmx/insert-vsx-be-order.c: Likewise.
* gcc.dg/vmx/ld-vsx.c: Likewise.
* gcc.dg/vmx/ld-vsx-be-order.c: Likewise.
* gcc.dg/vmx/ldl-vsx.c: Likewise.
* gcc.dg/vmx/ldl-vsx-be-order.c: Likewise.
* gcc.dg/vmx/merge-vsx.c: Likewise.
* gcc.dg/vmx/merge-vsx-be-order.c: Likewise.
* gcc.dg/vmx/st-vsx.c: Likewise.
* gcc.dg/vmx/st-vsx-be-order.c: Likewise.
* gcc.dg/vmx/stl-vsx.c: Likewise.
* gcc.dg/vmx/stl-vsx-be-order.c: Likewise.
From-SVN: r209109
backport: rs6000.opt (-mlra): Add switch to enable the LRA register allocator.
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2014-02-04 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.opt (-mlra): Add switch to enable the LRA
register allocator.
* config/rs6000/rs6000.c (TARGET_LRA_P): Add support for -mlra to
enable the LRA register allocator. Back port the changes from the
trunk to enable LRA.
(rs6000_legitimate_offset_address_p): Likewise.
(legitimate_lo_sum_address_p): Likewise.
(use_toc_relative_ref): Likewise.
(rs6000_legitimate_address_p): Likewise.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_mode): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_lra_p): Likewise.
* config/rs6000/sync.md (load_lockedti): Copy TI/PTI variables by
64-bit parts to force the register allocator to allocate even/odd
register pairs for the quad word atomic instructions.
(store_conditionalti): Likewise.
From-SVN: r209108
backport: re PR target/59909 (Quad memory bootstrap issues on little endian powerpc64 power8 systems)
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port from mainline
2014-01-23 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/59909
* gcc.target/powerpc/quad-atomic.c: New file to test power8 quad
word atomic functions at runtime.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Back port from mainline
2014-01-23 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/59909
* doc/invoke.texi (RS/6000 and PowerPC Options): Document
-mquad-memory-atomic. Update -mquad-memory documentation to say
it is only used for non-atomic loads/stores.
* config/rs6000/predicates.md (quad_int_reg_operand): Allow either
-mquad-memory or -mquad-memory-atomic switches.
* config/rs6000/rs6000-cpus.def (ISA_2_7_MASKS_SERVER): Add
-mquad-memory-atomic to ISA 2.07 support.
* config/rs6000/rs6000.opt (-mquad-memory-atomic): Add new switch
to separate support of normal quad word memory operations (ldq,
stq) from the atomic quad word memory operations.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Add
support to separate non-atomic quad word operations from atomic
quad word operations. Disable non-atomic quad word operations in
little endian mode so that we don't have to swap words after the
load and before the store.
(quad_load_store_p): Add comment about atomic quad word support.
(rs6000_opt_masks): Add -mquad-memory-atomic to the list of
options printed with -mdebug=reg.
* config/rs6000/rs6000.h (TARGET_SYNC_TI): Use
-mquad-memory-atomic as the test for whether we have quad word
atomic instructions.
(TARGET_SYNC_HI_QI): If either -mquad-memory-atomic,
-mquad-memory, or -mp8-vector are used, allow byte/half-word
atomic operations.
* config/rs6000/sync.md (load_lockedti): Insure that the address
is a proper indexed or indirect address for the lqarx instruction.
On little endian systems, swap the hi/lo registers after the lqarx
instruction.
(load_lockedpti): Use indexed_or_indirect_operand predicate to
insure the address is valid for the lqarx instruction.
(store_conditionalti): Insure that the address is a proper indexed
or indirect address for the stqcrx. instruction. On little endian
systems, swap the hi/lo registers before doing the stqcrx.
instruction.
(store_conditionalpti): Use indexed_or_indirect_operand predicate to
insure the address is valid for the stqcrx. instruction.
* gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
Define __QUAD_MEMORY__ and __QUAD_MEMORY_ATOMIC__ based on what
type of quad memory support is available.
From-SVN: r209107
backport: re PR target/56843 (PowerPC Newton-Raphson reciprocal estimates can be improved)
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-04-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR target/56843
* config/rs6000/rs6000.c (rs6000_emit_swdiv_high_precision): Remove.
(rs6000_emit_swdiv_low_precision): Remove.
(rs6000_emit_swdiv): Rewrite to handle between one and four
iterations of Newton-Raphson generally; modify required number of
iterations for some cases.
* config/rs6000/rs6000.h (RS6000_RECIP_HIGH_PRECISION_P): Remove.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-04-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR target/56843
* gcc.target/powerpc/recip-1.c: Modify expected output.
* gcc.target/powerpc/recip-3.c: Likewise.
* gcc.target/powerpc/recip-4.c: Likewise.
* gcc.target/powerpc/recip-5.c: Add expected output for iterations.
From-SVN: r209104
backport: builtins.def (BUILT_IN_FABSD32): New DFP ABS builtin.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-08-19 Peter Bergner <bergner@vnet.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* builtins.def (BUILT_IN_FABSD32): New DFP ABS builtin.
(BUILT_IN_FABSD64): Likewise.
(BUILT_IN_FABSD128): Likewise.
* builtins.c (expand_builtin): Add support for
new DFP ABS builtins.
(fold_builtin_1): Likewise.
* config/rs6000/dfp.md
(*abstd2_fpr): Handle non-overlapping destination
and source operands.
(*nabstd2_fpr): Likewise.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-08-19 Peter Bergner <bergner@vnet.ibm.com>
* gcc.target/powerpc/dfp-dd-2.c: New test.
* gcc.target/powerpc/dfp-td-2.c: Likewise.
* gcc.target/powerpc/dfp-td-3.c: Likewise.
From-SVN: r209103
backport: invoke.texi (-mabi=elfv1, [...]): Document.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r204842:
2013-11-15 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* doc/invoke.texi (-mabi=elfv1, -mabi=elfv2): Document.
Backport from mainline r204809:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/sysv4le.h (LINUX64_DEFAULT_ABI_ELFv2): Define.
Backport from mainline r204808:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.h (RS6000_SAVE_AREA): Handle ABI_ELFv2.
(RS6000_SAVE_TOC): Remove.
(RS6000_TOC_SAVE_SLOT): New macro.
* config/rs6000/rs6000.c (rs6000_parm_offset): New function.
(rs6000_parm_start): Use it.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_emit_prologue): Use RS6000_TOC_SAVE_SLOT.
(rs6000_emit_epilogue): Likewise.
(rs6000_call_aix): Likewise.
(rs6000_output_function_prologue): Do not save/restore r11
around calling _mcount for ABI_ELFv2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000-protos.h (rs6000_reg_parm_stack_space):
Add prototype.
* config/rs6000/rs6000.h (RS6000_REG_SAVE): Remove.
(REG_PARM_STACK_SPACE): Call rs6000_reg_parm_stack_space.
* config/rs6000/rs6000.c (rs6000_parm_needs_stack): New function.
(rs6000_function_parms_need_stack): Likewise.
(rs6000_reg_parm_stack_space): Likewise.
(rs6000_function_arg): Do not replace BLKmode by Pmode when
returning a register argument.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (FP_ARG_MAX_RETURN): New macro.
(ALTIVEC_ARG_MAX_RETURN): Likewise.
(FUNCTION_VALUE_REGNO_P): Use them.
* config/rs6000/rs6000.c (TARGET_RETURN_IN_MSB): Define.
(rs6000_return_in_msb): New function.
(rs6000_return_in_memory): Handle ELFv2 homogeneous aggregates.
Handle aggregates of up to 16 bytes for ELFv2.
(rs6000_function_value): Handle ELFv2 homogeneous aggregates.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define.
* config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function.
(rs6000_discover_homogeneous_aggregate): Likewise.
(rs6000_function_arg_boundary): Handle homogeneous aggregates.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_psave_function_arg): Handle BLKmode arguments.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Michael Gschwind <mkg@us.ibm.com>
* config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define.
* config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function.
(rs6000_discover_homogeneous_aggregate): Likewise.
(rs6000_function_arg_boundary): Handle homogeneous aggregates.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_psave_function_arg): Handle BLKmode arguments.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (machine_function): New member
r2_setup_needed.
(rs6000_emit_prologue): Set r2_setup_needed if necessary.
(rs6000_output_mi_thunk): Set r2_setup_needed.
(rs6000_output_function_prologue): Output global entry point
prologue and local entry point marker if needed for ABI_ELFv2.
Output -mprofile-kernel code here.
(output_function_profiler): Do not output -mprofile-kernel
code here; moved to rs6000_output_function_prologue.
(rs6000_file_start): Output ".abiversion 2" for ABI_ELFv2.
(rs6000_emit_move): Do not handle dot symbols for ABI_ELFv2.
(rs6000_output_function_entry): Likewise.
(rs6000_assemble_integer): Likewise.
(rs6000_elf_encode_section_info): Likewise.
(rs6000_elf_declare_function_name): Do not create dot symbols
or .opd section for ABI_ELFv2.
(rs6000_trampoline_size): Update for ABI_ELFv2 trampolines.
(rs6000_trampoline_init): Likewise.
(rs6000_elf_file_end): Call file_end_indicate_exec_stack
for ABI_ELFv2.
(rs6000_call_aix): Handle ELFv2 indirect calls. Do not check
for function descriptors in ABI_ELFv2.
* config/rs6000/rs6000.md ("*call_indirect_aix<mode>"): Support
on ABI_AIX only, not ABI_ELFv2.
("*call_value_indirect_aix<mode>"): Likewise.
("*call_indirect_elfv2<mode>"): New pattern.
("*call_value_indirect_elfv2<mode>"): Likewise.
* config/rs6000/predicates.md ("symbol_ref_operand"): Do not
check for function descriptors in ABI_ELFv2.
("current_file_function_operand"): Likewise.
* config/rs6000/ppc-asm.h [__powerpc64__ && _CALL_ELF == 2]:
(toc): Undefine.
(FUNC_NAME): Define ELFv2 variant.
(JUMP_TARGET): Likewise.
(FUNC_START): Likewise.
(HIDDEN_FUNC): Likewise.
(FUNC_END): Likeiwse.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config.gcc [powerpc*-*-* | rs6000-*-*]: Support --with-abi=elfv1
and --with-abi=elfv2.
* config/rs6000/option-defaults.h (OPTION_DEFAULT_SPECS): Add "abi".
* config/rs6000/rs6000.opt (mabi=elfv1): New option.
(mabi=elfv2): Likewise.
* config/rs6000/rs6000-opts.h (enum rs6000_abi): Add ABI_ELFv2.
* config/rs6000/linux64.h (DEFAULT_ABI): Do not hard-code to AIX_ABI
if !RS6000_BI_ARCH.
(ELFv2_ABI_CHECK): New macro.
(SUBSUBTARGET_OVERRIDE_OPTIONS): Use it to decide whether to set
rs6000_current_abi to ABI_AIX or ABI_ELFv2.
(GLIBC_DYNAMIC_LINKER64): Support ELFv2 ld.so version.
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Predefine
_CALL_ELF and __STRUCT_PARM_ALIGN__ if appropriate.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Handle ABI_ELFv2.
(debug_stack_info): Likewise.
(rs6000_file_start): Treat ABI_ELFv2 the same as ABI_AIX.
(rs6000_legitimize_tls_address): Likewise.
(rs6000_conditional_register_usage): Likewise.
(rs6000_emit_move): Likewise.
(init_cumulative_args): Likewise.
(rs6000_function_arg_advance_1): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
(rs6000_output_function_entry): Likewise.
(rs6000_assemble_integer): Likewise.
(rs6000_savres_strategy): Likewise.
(rs6000_stack_info): Likewise.
(rs6000_function_ok_for_sibcall): Likewise.
(rs6000_emit_load_toc_table): Likewise.
(rs6000_savres_routine_name): Likewise.
(ptr_regno_for_savres): Likewise.
(rs6000_emit_prologue): Likewise.
(rs6000_emit_epilogue): Likewise.
(rs6000_output_function_epilogue): Likewise.
(output_profile_hook): Likewise.
(output_function_profiler): Likewise.
(rs6000_trampoline_size): Likewise.
(rs6000_trampoline_init): Likewise.
(rs6000_elf_output_toc_section_asm_op): Likewise.
(rs6000_elf_encode_section_info): Likewise.
(rs6000_elf_reloc_rw_mask): Likewise.
(rs6000_elf_declare_function_name): Likewise.
(rs6000_function_arg_boundary): Treat ABI_ELFv2 the same as ABI_AIX,
except that rs6000_compat_align_parm is always assumed false.
(rs6000_gimplify_va_arg): Likewise.
(rs6000_call_aix): Update comment.
(rs6000_sibcall_aix): Likewise.
* config/rs6000/rs6000.md ("tls_gd_aix<TLSmode:tls_abi_suffix>"):
Treat ABI_ELFv2 the same as ABI_AIX.
("*tls_gd_call_aix<TLSmode:tls_abi_suffix>"): Likewise.
("tls_ld_aix<TLSmode:tls_abi_suffix>"): Likewise.
("*tls_ld_call_aix<TLSmode:tls_abi_suffix>"): Likewise.
("load_toc_aix_si"): Likewise.
("load_toc_aix_di"): Likewise.
("call"): Likewise.
("call_value"): Likewise.
("*call_local_aix<mode>"): Likewise.
("*call_value_local_aix<mode>"): Likewise.
("*call_nonlocal_aix<mode>"): Likewise.
("*call_value_nonlocal_aix<mode>"): Likewise.
("*call_indirect_aix<mode>"): Likewise.
("*call_value_indirect_aix<mode>"): Likewise.
("sibcall"): Likewise.
("sibcall_value"): Likewise.
("*sibcall_aix<mode>"): Likewise.
("*sibcall_value_aix<mode>"): Likewise.
* config/rs6000/predicates.md ("symbol_ref_operand"): Likewise.
("current_file_function_operand"): Likewise.
Backport from mainline r204807:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (rs6000_arg_partial_bytes): Simplify logic
by making use of the fact that for vector / floating point arguments
passed both in VRs/FPRs and in the fixed parameter area, the partial
bytes mechanism is in fact not used.
Backport from mainline r204806:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (rs6000_psave_function_arg): New function.
(rs6000_finish_function_arg): Likewise.
(rs6000_function_arg): Use rs6000_psave_function_arg and
rs6000_finish_function_arg to handle both vector and floating
point arguments that are also passed in GPRs / the stack.
Backport from mainline r204805:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (USE_FP_FOR_ARG_P): Remove TYPE argument.
(USE_ALTIVEC_FOR_ARG_P): Likewise.
(rs6000_darwin64_record_arg_advance_recurse): Update uses.
(rs6000_function_arg_advance_1):Likewise.
(rs6000_darwin64_record_arg_recurse): Likewise.
(rs6000_function_arg): Likewise.
(rs6000_arg_partial_bytes): Likewise.
Backport from mainline r204804:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Replace
"DEFAULT_ABI != ABI_AIX" test by testing for ABI_V4 or ABI_DARWIN.
(rs6000_savres_strategy): Likewise.
(rs6000_return_addr): Likewise.
(rs6000_emit_load_toc_table): Replace "DEFAULT_ABI != ABI_AIX" by
testing for ABI_V4 (since ABI_DARWIN is impossible here).
(rs6000_emit_prologue): Likewise.
(legitimate_lo_sum_address_p): Simplify DEFAULT_ABI test.
(rs6000_elf_declare_function_name): Remove duplicated test.
* config/rs6000/rs6000.md ("load_toc_v4_PIC_1"): Explicitly test
for ABI_V4 (instead of "DEFAULT_ABI != ABI_AIX" test).
("load_toc_v4_PIC_1_normal"): Likewise.
("load_toc_v4_PIC_1_476"): Likewise.
("load_toc_v4_PIC_1b"): Likewise.
("load_toc_v4_PIC_1b_normal"): Likewise.
("load_toc_v4_PIC_1b_476"): Likewise.
("load_toc_v4_PIC_2"): Likewise.
("load_toc_v4_PIC_3b"): Likewise.
("load_toc_v4_PIC_3c"): Likewise.
* config/rs6000/rs6000.h (RS6000_REG_SAVE): Simplify DEFAULT_ABI test.
(RS6000_SAVE_AREA): Likewise.
(FP_ARG_MAX_REG): Likewise.
(RETURN_ADDRESS_OFFSET): Likewise.
* config/rs6000/sysv.h (TARGET_TOC): Test for ABI_V4 instead
of ABI_AIX.
(SUBTARGET_OVERRIDE_OPTIONS): Likewise.
(MINIMAL_TOC_SECTION_ASM_OP): Likewise.
Backport from mainline r204803:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (rs6000_call_indirect_aix): Rename to ...
(rs6000_call_aix): ... this. Handle both direct and indirect calls.
Create call insn directly instead of via various gen_... routines.
Mention special registers used by the call in CALL_INSN_FUNCTION_USAGE.
(rs6000_sibcall_aix): New function.
* config/rs6000/rs6000.md (TOC_SAVE_OFFSET_32BIT): Remove.
(TOC_SAVE_OFFSET_64BIT): Likewise.
(AIX_FUNC_DESC_TOC_32BIT): Likewise.
(AIX_FUNC_DESC_TOC_64BIT): Likewise.
(AIX_FUNC_DESC_SC_32BIT): Likewise.
(AIX_FUNC_DESC_SC_64BIT): Likewise.
("call" expander): Call rs6000_call_aix.
("call_value" expander): Likewise.
("call_indirect_aix<ptrsize>"): Replace this pattern ...
("call_indirect_aix<ptrsize>_nor11"): ... and this pattern ...
("*call_indirect_aix<mode>"): ... by this insn pattern.
("call_value_indirect_aix<ptrsize>"): Replace this pattern ...
("call_value_indirect_aix<ptrsize>_nor11"): ... and this pattern ...
("*call_value_indirect_aix<mode>"): ... by this insn pattern.
("*call_nonlocal_aix32", "*call_nonlocal_aix64"): Replace by ...
("*call_nonlocal_aix<mode>"): ... this pattern.
("*call_value_nonlocal_aix32", "*call_value_nonlocal_aix64"): Replace
("*call_value_nonlocal_aix<mode>"): ... by this pattern.
("*call_local_aix<mode>"): New insn pattern.
("*call_value_local_aix<mode>"): Likewise.
("sibcall" expander): Call rs6000_sibcall_aix.
("sibcall_value" expander): Likewise. Move earlier in file.
("*sibcall_nonlocal_aix<mode>"): Replace by ...
("*sibcall_aix<mode>"): ... this pattern.
("*sibcall_value_nonlocal_aix<mode>"): Replace by ...
("*sibcall_value_aix<mode>"): ... this pattern.
* config/rs6000/rs6000-protos.h (rs6000_call_indirect_aix): Remove.
(rs6000_call_aix): Add prototype.
(rs6000_sibcall_aix): Likewise.
Backport from mainline r204799:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/rs6000.c (rs6000_emit_prologue): Do not place a
RTX_FRAME_RELATED_P marker on the UNSPEC_MOVESI_FROM_CR insn.
Instead, add USEs of all modified call-saved CR fields to the
insn storing the result to the stack slot, and provide an
appropriate REG_FRAME_RELATED_EXPR for that insn.
* config/rs6000/rs6000.md ("*crsave"): New insn pattern.
* config/rs6000/predicates.md ("crsave_operation"): New predicate.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r204808:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* gcc.target/powerpc/ppc64-abi-1.c (stack_frame_t): Remove
compiler and linker field if _CALL_ELF == 2.
* gcc.target/powerpc/ppc64-abi-2.c (stack_frame_t): Likewise.
* gcc.target/powerpc/ppc64-abi-dfp-1.c (stack_frame_t): Likewise.
* gcc.dg/stack-usage-1.c (SIZE): Update value for _CALL_ELF == 2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* gcc.target/powerpc/ppc64-abi-dfp-1.c (FUNC_START): New macro.
(WRAPPER): Use it.
* gcc.target/powerpc/no-r11-1.c: Skip on powerpc_elfv2.
* gcc.target/powerpc/no-r11-2.c: Skip on powerpc_elfv2.
* gcc.target/powerpc/no-r11-3.c: Skip on powerpc_elfv2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* lib/target-supports.exp (check_effective_target_powerpc_elfv2):
New function.
* gcc.target/powerpc/pr57949-1.c: Disable for powerpc_elfv2.
* gcc.target/powerpc/pr57949-2.c: Likewise.
Backport from mainline r204799:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* g++.dg/eh/ppc64-sighandle-cr.C: New test.
[libgcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r204808:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (TOC_SAVE_SLOT): Define.
(frob_update_context): Use it.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/tramp.S [__powerpc64__ && _CALL_ELF == 2]:
(trampoline_initial): Provide ELFv2 variant.
(__trampoline_setup): Likewise.
* config/rs6000/linux-unwind.h (frob_update_context): Do not
check for AIX indirect function call sequence if _CALL_ELF == 2.
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (get_regs): Do not support
old kernel versions if _CALL_ELF == 2.
(frob_update_context): Do not support PLT stub variants only
generated by old linkers if _CALL_ELF == 2.
Backport from mainline r204800:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (ppc_fallback_frame_state): Correct
location of CR save area for 64-bit little-endian systems.
[libitm]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r204808:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/powerpc/sjlj.S [__powerpc64__ && _CALL_ELF == 2]:
(FUNC): Define ELFv2 variant.
(END): Likewise.
(HIDDEN): Likewise.
(CALL): Likewise.
(BASE): Likewise.
(LR_SAVE): Likewise.
[libstdc++]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r204808:
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* scripts/extract_symvers.in: Ignore <localentry: > fields
in readelf --symbols output.
From-SVN: r209098
backport: rs6000.c (rs6000_expand_vec_perm_const_1): Correct for little endian.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r205333
2013-11-24 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vec_perm_const_1): Correct
for little endian.
Backport from mainline r205241
2013-11-21 Bill Schmidt <wschmidt@vnet.ibm.com>
* config/rs6000/vector.md (vec_pack_trunc_v2df): Revert previous
little endian change.
(vec_pack_sfix_trunc_v2df): Likewise.
(vec_pack_ufix_trunc_v2df): Likewise.
* config/rs6000/rs6000.c (rs6000_expand_interleave): Correct
double checking of endianness.
Backport from mainline r205146
2013-11-20 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vsx.md (vsx_set_<mode>): Adjust for little endian.
(vsx_extract_<mode>): Likewise.
(*vsx_extract_<mode>_one_le): New LE variant on
*vsx_extract_<mode>_zero.
(vsx_extract_v4sf): Adjust for little endian.
Backport from mainline r205080
2013-11-19 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Adjust
V16QI vector splat case for little endian.
Backport from mainline r205045:
2013-11-19 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/rs6000/vector.md ("mov<mode>"): Do not call
rs6000_emit_le_vsx_move to move into or out of GPRs.
* config/rs6000/rs6000.c (rs6000_emit_le_vsx_move): Assert
source and destination are not GPR hard regs.
Backport from mainline r204920
2011-11-17 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_frame_related): Add split_reg
parameter and use it in REG_FRAME_RELATED_EXPR note.
(emit_frame_save): Call rs6000_frame_related with extra NULL_RTX
parameter.
(rs6000_emit_prologue): Likewise, but for little endian VSX
stores, pass the source register of the store instead.
Backport from mainline r204862
2013-11-15 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (UNSPEC_VPERM_X, UNSPEC_VPERM_UNS_X):
Remove.
(altivec_vperm_<mode>): Revert earlier little endian change.
(*altivec_vperm_<mode>_internal): Remove.
(altivec_vperm_<mode>_uns): Revert earlier little endian change.
(*altivec_vperm_<mode>_uns_internal): Remove.
* config/rs6000/vector.md (vec_realign_load_<mode>): Revise
commentary.
Backport from mainline r204441
2013-11-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Remove restriction against use of VSX instructions when generating
code for little endian mode.
Backport from mainline r204440
2013-11-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (mulv4si3): Ensure we generate vmulouh
for both big and little endian.
(mulv8hi3): Swap input operands for merge high and merge low
instructions for little endian.
Backport from mainline r204439
2013-11-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (vec_widen_umult_even_v16qi): Change
define_insn to define_expand that uses even patterns for big
endian and odd patterns for little endian.
(vec_widen_smult_even_v16qi): Likewise.
(vec_widen_umult_even_v8hi): Likewise.
(vec_widen_smult_even_v8hi): Likewise.
(vec_widen_umult_odd_v16qi): Likewise.
(vec_widen_smult_odd_v16qi): Likewise.
(vec_widen_umult_odd_v8hi): Likewise.
(vec_widen_smult_odd_v8hi): Likewise.
(altivec_vmuleub): New define_insn.
(altivec_vmuloub): Likewise.
(altivec_vmulesb): Likewise.
(altivec_vmulosb): Likewise.
(altivec_vmuleuh): Likewise.
(altivec_vmulouh): Likewise.
(altivec_vmulesh): Likewise.
(altivec_vmulosh): Likewise.
Backport from mainline r204395
2013-11-05 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vector.md (vec_pack_sfix_trunc_v2df): Adjust for
little endian.
(vec_pack_ufix_trunc_v2df): Likewise.
Backport from mainline r204363
2013-11-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (vec_widen_umult_hi_v16qi): Swap
arguments to merge instruction for little endian.
(vec_widen_umult_lo_v16qi): Likewise.
(vec_widen_smult_hi_v16qi): Likewise.
(vec_widen_smult_lo_v16qi): Likewise.
(vec_widen_umult_hi_v8hi): Likewise.
(vec_widen_umult_lo_v8hi): Likewise.
(vec_widen_smult_hi_v8hi): Likewise.
(vec_widen_smult_lo_v8hi): Likewise.
Backport from mainline r204350
2013-11-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vsx.md (*vsx_le_perm_store_<mode> for VSX_D):
Replace the define_insn_and_split with a define_insn and two
define_splits, with the split after reload re-permuting the source
register to its original value.
(*vsx_le_perm_store_<mode> for VSX_W): Likewise.
(*vsx_le_perm_store_v8hi): Likewise.
(*vsx_le_perm_store_v16qi): Likewise.
Backport from mainline r204321
2013-11-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vector.md (vec_pack_trunc_v2df): Adjust for
little endian.
Backport from mainline r204321
2013-11-02 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_set): Adjust for
little endian.
Backport from mainline r203980
2013-10-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (mulv8hi3): Adjust for little endian.
Backport from mainline r203930
2013-10-22 Bill Schmidt <wschmidt@vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Reverse
meaning of merge-high and merge-low masks for little endian; avoid
use of vector-pack masks for little endian for mismatched modes.
Backport from mainline r203877
2013-10-20 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (vec_unpacku_hi_v16qi): Adjust for
little endian.
(vec_unpacku_hi_v8hi): Likewise.
(vec_unpacku_lo_v16qi): Likewise.
(vec_unpacku_lo_v8hi): Likewise.
Backport from mainline r203863
2013-10-19 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (vspltis_constant): Make sure we check
all elements for both endian flavors.
Backport from mainline r203714
2013-10-16 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc/config/rs6000/vector.md (vec_unpacks_hi_v4sf): Correct for
endianness.
(vec_unpacks_lo_v4sf): Likewise.
(vec_unpacks_float_hi_v4si): Likewise.
(vec_unpacks_float_lo_v4si): Likewise.
(vec_unpacku_float_hi_v4si): Likewise.
(vec_unpacku_float_lo_v4si): Likewise.
Backport from mainline r203713
2013-10-16 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vsx.md (vsx_concat_<mode>): Adjust output for LE.
(vsx_concat_v2sf): Likewise.
Backport from mainline r203458
2013-10-11 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vsx.md (*vsx_le_perm_load_v2di): Generalize to
handle vector float as well.
(*vsx_le_perm_load_v4si): Likewise.
(*vsx_le_perm_store_v2di): Likewise.
(*vsx_le_perm_store_v4si): Likewise.
Backport from mainline r203457
2013-10-11 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vector.md (vec_realign_load<mode>): Generate vperm
directly to circumvent subtract from splat{31} workaround.
* config/rs6000/rs6000-protos.h (altivec_expand_vec_perm_le): New
prototype.
* config/rs6000/rs6000.c (altivec_expand_vec_perm_le): New.
* config/rs6000/altivec.md (define_c_enum "unspec"): Add
UNSPEC_VPERM_X and UNSPEC_VPERM_UNS_X.
(altivec_vperm_<mode>): Convert to define_insn_and_split to
separate big and little endian logic.
(*altivec_vperm_<mode>_internal): New define_insn.
(altivec_vperm_<mode>_uns): Convert to define_insn_and_split to
separate big and little endian logic.
(*altivec_vperm_<mode>_uns_internal): New define_insn.
(vec_permv16qi): Add little endian logic.
Backport from mainline r203247
2013-10-07 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const_le): New.
(altivec_expand_vec_perm_const): Call it.
Backport from mainline r203246
2013-10-07 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/vector.md (mov<mode>): Emit permuted move
sequences for LE VSX loads and stores at expand time.
* config/rs6000/rs6000-protos.h (rs6000_emit_le_vsx_move): New
prototype.
* config/rs6000/rs6000.c (rs6000_const_vec): New.
(rs6000_gen_le_vsx_permute): New.
(rs6000_gen_le_vsx_load): New.
(rs6000_gen_le_vsx_store): New.
(rs6000_gen_le_vsx_move): New.
* config/rs6000/vsx.md (*vsx_le_perm_load_v2di): New.
(*vsx_le_perm_load_v4si): New.
(*vsx_le_perm_load_v8hi): New.
(*vsx_le_perm_load_v16qi): New.
(*vsx_le_perm_store_v2di): New.
(*vsx_le_perm_store_v4si): New.
(*vsx_le_perm_store_v8hi): New.
(*vsx_le_perm_store_v16qi): New.
(*vsx_xxpermdi2_le_<mode>): New.
(*vsx_xxpermdi4_le_<mode>): New.
(*vsx_xxpermdi8_le_V8HI): New.
(*vsx_xxpermdi16_le_V16QI): New.
(*vsx_lxvd2x2_le_<mode>): New.
(*vsx_lxvd2x4_le_<mode>): New.
(*vsx_lxvd2x8_le_V8HI): New.
(*vsx_lxvd2x16_le_V16QI): New.
(*vsx_stxvd2x2_le_<mode>): New.
(*vsx_stxvd2x4_le_<mode>): New.
(*vsx_stxvd2x8_le_V8HI): New.
(*vsx_stxvd2x16_le_V16QI): New.
Backport from mainline r201235
2013-07-24 Bill Schmidt <wschmidt@linux.ibm.com>
Anton Blanchard <anton@au1.ibm.com>
* config/rs6000/altivec.md (altivec_vpkpx): Handle little endian.
(altivec_vpks<VI_char>ss): Likewise.
(altivec_vpks<VI_char>us): Likewise.
(altivec_vpku<VI_char>us): Likewise.
(altivec_vpku<VI_char>um): Likewise.
Backport from mainline r201208
2013-07-24 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
Anton Blanchard <anton@au1.ibm.com>
* config/rs6000/vector.md (vec_realign_load_<mode>): Reorder input
operands to vperm for little endian.
* config/rs6000/rs6000.c (rs6000_expand_builtin): Use lvsr instead
of lvsl to create the control mask for a vperm for little endian.
Backport from mainline r201195
2013-07-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Anton Blanchard <anton@au1.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Reverse
two operands for little-endian.
Backport from mainline r201193
2013-07-23 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Anton Blanchard <anton@au1.ibm.com>
* config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Correct
selection of field for vector splat in little endian mode.
Backport from mainline r201149
2013-07-22 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
Anton Blanchard <anton@au1.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Fix
endianness when selecting field to splat.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline r205638
2013-12-03 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vect/costmodel/ppc/costmodel-slp-34.c: Skip for little
endian.
Backport from mainline r205146
2013-11-20 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.target/powerpc/pr48258-1.c: Skip for little endian.
Backport from mainline r204862
2013-11-15 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/3b-15.c: Revise for little endian.
Backport from mainline r204321
2013-11-02 Bill Schmidt <wschmidt@vnet.linux.ibm.com>
* gcc.dg/vmx/vec-set.c: New.
Backport from mainline r204138
2013-10-28 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/gcc-bug-i.c: Add little endian variant.
* gcc.dg/vmx/eg-5.c: Likewise.
Backport from mainline r203930
2013-10-22 Bill Schmidt <wschmidt@vnet.ibm.com>
* gcc.target/powerpc/altivec-perm-1.c: Move the two vector pack
tests into...
* gcc.target/powerpc/altivec-perm-3.c: ...this new test, which is
restricted to big-endian targets.
Backport from mainline r203246
2013-10-07 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.target/powerpc/pr43154.c: Skip for ppc64 little endian.
* gcc.target/powerpc/fusion.c: Likewise.
[libcpp]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-11-18 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* lex.c (search_line_fast): Correct for little endian.
From-SVN: r209094
backport: htmintrin.h (_TEXASR_INSTRUCTION_FETCH_CONFLICT): Fix typo in macro name.
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-12-03 Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/htmintrin.h (_TEXASR_INSTRUCTION_FETCH_CONFLICT): Fix
typo in macro name.
(_TEXASRU_INSTRUCTION_FETCH_CONFLICT): Likewise.
Backport from mainline r205233.
2013-11-21 Peter Bergner <bergner@vnet.ibm.com>
* doc/extend.texi: Document htm builtins.
Backport from mainline
2013-07-17 Iain Sandoe <iain@codesourcery.com>
* config/rs6000/darwin.h (REGISTER_NAMES): Add HTM registers.
Backport from mainline
2013-07-16 Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Do not
enable extra ISA flags with TARGET_HTM.
2013-07-16 Jakub Jelinek <jakub@redhat.com>
Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTERS): Mention HTM
registers in the comment.
(DWARF_FRAME_REGISTERS): Subtract also the 3 HTM registers.
(DWARF_REG_TO_UNWIND_COLUMN): Use DWARF_FRAME_REGISTERS
rather than FIRST_PSEUDO_REGISTERS.
* config.gcc (powerpc*-*-*): Install htmintrin.h and htmxlintrin.h.
* config/rs6000/t-rs6000 (MD_INCLUDES): Add htm.md.
* config/rs6000/rs6000.opt: Add -mhtm option.
* config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Add OPTION_MASK_HTM.
(ISA_2_7_MASKS_SERVER): Add OPTION_MASK_HTM.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
__HTM__ if the HTM instructions are available.
* config/rs6000/predicates.md (u3bit_cint_operand, u10bit_cint_operand)
(htm_spr_reg_operand): New define_predicates.
* config/rs6000/rs6000.md (define_attr "type"): Add htm.
(TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO): New define_constants.
Include htm.md.
* config/rs6000/rs6000-builtin.def (BU_HTM_0, BU_HTM_1, BU_HTM_2)
(BU_HTM_3, BU_HTM_SPR0, BU_HTM_SPR1): Add support macros for defining
HTM builtin functions.
* config/rs6000/rs6000.c (RS6000_BUILTIN_H): New macro.
(rs6000_reg_names, alt_reg_names): Add HTM SPR register names.
(rs6000_init_hard_regno_mode_ok): Add support for HTM instructions.
(rs6000_builtin_mask_calculate): Likewise.
(rs6000_option_override_internal): Likewise.
(bdesc_htm): Add new HTM builtin support.
(htm_spr_num): New function.
(htm_spr_regno): Likewise.
(rs6000_htm_spr_icode): Likewise.
(htm_expand_builtin): Likewise.
(htm_init_builtins): Likewise.
(rs6000_expand_builtin): Add support for HTM builtin functions.
(rs6000_init_builtins): Likewise.
(rs6000_invalid_builtin, rs6000_opt_mask): Add support for -mhtm option.
* config/rs6000/rs6000.h (ASM_CPU_SPEC): Add support for -mhtm.
(TARGET_HTM, MASK_HTM): Define macros.
(FIRST_PSEUDO_REGISTER): Adjust for new HTM SPR registers.
(FIXED_REGISTERS): Likewise.
(CALL_USED_REGISTERS): Likewise.
(CALL_REALLY_USED_REGISTERS): Likewise.
(REG_ALLOC_ORDER): Likewise.
(enum reg_class): Likewise.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
(REGISTER_NAMES): Likewise.
(ADDITIONAL_REGISTER_NAMES): Likewise.
(RS6000_BTC_SPR, RS6000_BTC_VOID, RS6000_BTC_32BIT, RS6000_BTC_64BIT)
(RS6000_BTC_MISC_MASK, RS6000_BTM_HTM): New macros.
(RS6000_BTM_COMMON): Add RS6000_BTM_HTM.
* config/rs6000/htm.md: New file.
* config/rs6000/htmintrin.h: New file.
* config/rs6000/htmxlintrin.h: New file.
[libitm]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
* acinclude.m4 (LIBITM_CHECK_AS_HTM): New.
* configure: Rebuild.
* configure.tgt (target_cpu): Add -mhtm to XCFLAGS.
* config/powerpc/target.h: Include sys/auxv.h and htmintrin.h.
(USE_HTM_FASTPATH): Define.
(_TBEGIN_STARTED, _TBEGIN_INDETERMINATE, _TBEGIN_PERSISTENT)
(_HTM_RETRIES) New macros.
(htm_abort, htm_abort_should_retry, htm_available, htm_begin, htm_init)
(htm_begin_success, htm_commit, htm_transaction_active): New functions.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
* lib/target-supports.exp (check_effective_target_powerpc_htm_ok): New
function to test if HTM is available.
* gcc.target/powerpc/htm-xl-intrin-1.c: New test.
* gcc.target/powerpc/htm-builtin-1.c: New test.
From-SVN: r209088
Backport PRs 57615, 57744, 58160, 58587, 58673, 59054
[gcc]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Apply mainline
2013-11-23 Alan Modra <amodra@gmail.com>
* config/rs6000/vsx.md (fusion peepholes): Disable when !TARGET_VSX.
Backport from mainline
2013-11-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/59054
* config/rs6000/rs6000.md (movdi_internal32): Eliminate
constraints that would allow DImode into the traditional Altivec
registers, but cause undesirable code generation when loading 0 as
a constant.
(movdi_internal64): Likewise.
(cmp<mode>_fpr): Do not use %x for CR register output.
(extendsfdf2_fpr): Fix constraints when -mallow-upper-df and
-mallow-upper-sf debug switches are used.
Backport from mainline
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (enum rs6000_reload_reg_type): Add new
fields to the reg_addr array that describes the valid addressing
mode for any register, general purpose registers, floating point
registers, and Altivec registers.
(FIRST_RELOAD_REG_CLASS): Likewise.
(LAST_RELOAD_REG_CLASS): Likewise.
(struct reload_reg_map_type): Likewise.
(reload_reg_map_type): Likewise.
(RELOAD_REG_VALID): Likewise.
(RELOAD_REG_MULTIPLE): Likewise.
(RELOAD_REG_INDEXED): Likewise.
(RELOAD_REG_OFFSET): Likewise.
(RELOAD_REG_PRE_INCDEC): Likewise.
(RELOAD_REG_PRE_MODIFY): Likewise.
(reg_addr): Likewise.
(mode_supports_pre_incdec_p): New helper functions to say whether
a given mode supports PRE_INC, PRE_DEC, and PRE_MODIFY.
(mode_supports_pre_modify_p): Likewise.
(rs6000_debug_vector_unit): Rearrange the -mdebug=reg output to
print the valid address mode bits for each mode.
(rs6000_debug_print_mode): Likewise.
(rs6000_debug_reg_global): Likewise.
(rs6000_setup_reg_addr_masks): New function to set up the address
mask bits for each type.
(rs6000_init_hard_regno_mode_ok): Use memset to clear arrays.
Call rs6000_setup_reg_addr_masks to set up the address mask bits.
(rs6000_legitimate_address_p): Use mode_supports_pre_incdec_p and
mode_supports_pre_modify_p to determine if PRE_INC, PRE_DEC, and
PRE_MODIFY are supported.
(rs6000_output_move_128bit): Change to use {src,dest}_vmx_p for altivec
registers, instead of {src,dest}_av_p.
(rs6000_print_options_internal): Tweak the debug output slightly.
Backport from mainline
2013-10-03 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000-builtin.def (XSRDPIM): Use floatdf2,
ceildf2, btruncdf2, instead of vsx_* name.
* config/rs6000/vsx.md (vsx_add<mode>3): Change arithmetic
iterators to only do V2DF and V4SF here. Move the DF code to
rs6000.md where it is combined with SF mode. Replace <VSv> with
just 'v' since only vector operations are handled with these insns
after moving the DF support to rs6000.md.
(vsx_sub<mode>3): Likewise.
(vsx_mul<mode>3): Likewise.
(vsx_div<mode>3): Likewise.
(vsx_fre<mode>2): Likewise.
(vsx_neg<mode>2): Likewise.
(vsx_abs<mode>2): Likewise.
(vsx_nabs<mode>2): Likewise.
(vsx_smax<mode>3): Likewise.
(vsx_smin<mode>3): Likewise.
(vsx_sqrt<mode>2): Likewise.
(vsx_rsqrte<mode>2): Likewise.
(vsx_fms<mode>4): Likewise.
(vsx_nfma<mode>4): Likewise.
(vsx_copysign<mode>3): Likewise.
(vsx_btrunc<mode>2): Likewise.
(vsx_floor<mode>2): Likewise.
(vsx_ceil<mode>2): Likewise.
(vsx_smaxsf3): Delete scalar ops that were moved to rs6000.md.
(vsx_sminsf3): Likewise.
(vsx_fmadf4): Likewise.
(vsx_fmsdf4): Likewise.
(vsx_nfmadf4): Likewise.
(vsx_nfmsdf4): Likewise.
(vsx_cmpdf_internal1): Likewise.
* config/rs6000/rs6000.h (TARGET_SF_SPE): Define macros to make it
simpler to select whether a target has SPE or traditional floating
point support in iterators.
(TARGET_DF_SPE): Likewise.
(TARGET_SF_FPR): Likewise.
(TARGET_DF_FPR): Likewise.
(TARGET_SF_INSN): Macros to say whether floating point support
exists for a given operation for expanders.
(TARGET_DF_INSN): Likewise.
* config/rs6000/rs6000.c (Ftrad): New mode attributes to allow
combining of SF/DF mode operations, using both traditional and VSX
registers.
(Fvsx): Likewise.
(Ff): Likewise.
(Fv): Likewise.
(Fs): Likewise.
(Ffre): Likewise.
(FFRE): Likewise.
(abs<mode>2): Combine SF/DF modes using traditional floating point
instructions. Add support for using the upper DF registers with
VSX support, and SF registers with power8-vector support. Update
expanders for operations supported by both the SPE and traditional
floating point units.
(abs<mode>2_fpr): Likewise.
(nabs<mode>2): Likewise.
(nabs<mode>2_fpr): Likewise.
(neg<mode>2): Likewise.
(neg<mode>2_fpr): Likewise.
(add<mode>3): Likewise.
(add<mode>3_fpr): Likewise.
(sub<mode>3): Likewise.
(sub<mode>3_fpr): Likewise.
(mul<mode>3): Likewise.
(mul<mode>3_fpr): Likewise.
(div<mode>3): Likewise.
(div<mode>3_fpr): Likewise.
(sqrt<mode>3): Likewise.
(sqrt<mode>3_fpr): Likewise.
(fre<Fs>): Likewise.
(rsqrt<mode>2): Likewise.
(cmp<mode>_fpr): Likewise.
(smax<mode>3): Likewise.
(smin<mode>3): Likewise.
(smax<mode>3_vsx): Likewise.
(smin<mode>3_vsx): Likewise.
(negsf2): Delete SF operations that are merged with DF.
(abssf2): Likewise.
(addsf3): Likewise.
(subsf3): Likewise.
(mulsf3): Likewise.
(divsf3): Likewise.
(fres): Likewise.
(fmasf4_fpr): Likewise.
(fmssf4_fpr): Likewise.
(nfmasf4_fpr): Likewise.
(nfmssf4_fpr): Likewise.
(sqrtsf2): Likewise.
(rsqrtsf_internal1): Likewise.
(smaxsf3): Likewise.
(sminsf3): Likewise.
(cmpsf_internal1): Likewise.
(copysign<mode>3_fcpsgn): Add VSX/power8-vector support.
(negdf2): Delete DF operations that are merged with SF.
(absdf2): Likewise.
(nabsdf2): Likewise.
(adddf3): Likewise.
(subdf3): Likewise.
(muldf3): Likewise.
(divdf3): Likewise.
(fred): Likewise.
(rsqrtdf_internal1): Likewise.
(fmadf4_fpr): Likewise.
(fmsdf4_fpr): Likewise.
(nfmadf4_fpr): Likewise.
(nfmsdf4_fpr): Likewise.
(sqrtdf2): Likewise.
(smaxdf3): Likewise.
(smindf3): Likewise.
(cmpdf_internal1): Likewise.
(lrint<mode>di2): Use TARGET_<MODE>_FPR macro.
(btrunc<mode>2): Delete separate expander, and combine with the
insn and add VSX instruction support. Use TARGET_<MODE>_FPR.
(btrunc<mode>2_fpr): Likewise.
(ceil<mode>2): Likewise.
(ceil<mode>2_fpr): Likewise.
(floor<mode>2): Likewise.
(floor<mode>2_fpr): Likewise.
(fma<mode>4_fpr): Combine SF and DF fused multiply/add support.
Add support for using the upper registers with VSX and
power8-vector. Move insns to be closer to the define_expands. On
VSX systems, prefer the traditional form of FMA over the VSX
version, since the traditional form allows the target not to
overlap with the inputs.
(fms<mode>4_fpr): Likewise.
(nfma<mode>4_fpr): Likewise.
(nfms<mode>4_fpr): Likewise.
Backport from mainline
2013-09-27 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): Allow
DFmode, DImode, and SFmode in the upper VSX registers based on the
-mupper-regs-{df,sf} flags. Fix wu constraint to be ALTIVEC_REGS
if -mpower8-vector. Combine -mvsx-timode handling with the rest
of the VSX register handling.
* config/rs6000/rs6000.md (f32_lv): Use %x0 for VSX regsters.
(f32_sv): Likewise.
(zero_extendsidi2_lfiwzx): Add support for loading into the
Altivec registers with -mpower8-vector. Use wu/wv constraints to
only do VSX memory options on Altivec registers.
(extendsidi2_lfiwax): Likewise.
(extendsfdf2_fpr): Likewise.
(mov<mode>_hardfloat, SF/SD modes): Likewise.
(mov<mode>_hardfloat32, DF/DD modes): Likewise.
(mov<mode>_hardfloat64, DF/DD modes): Likewise.
(movdi_internal64): Likewise.
Backport from mainline
2013-09-23 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_vector_reload): Delete, combine
reload helper function arrays into a single array reg_addr.
(reload_fpr_gpr): Likewise.
(reload_gpr_vsx): Likewise.
(reload_vsx_gpr): Likewise.
(struct rs6000_reg_addr): Likewise.
(reg_addr): Likewise.
(rs6000_debug_reg_global): Change rs6000_vector_reload,
reload_fpr_gpr, reload_gpr_vsx, reload_vsx_gpr uses to reg_addr.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_secondary_reload_direct_move): Likewise.
(rs6000_secondary_reload): Likewise.
* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add new
constraints: wu, ww, and wy. Repurpose wv constraint added during
power8 changes. Put wg constraint in alphabetical order.
* config/rs6000/rs6000.opt (-mvsx-scalar-float): New debug switch
for future work to add ISA 2.07 VSX single precision support.
(-mvsx-scalar-double): Change default from -1 to 1, update
documentation comment.
(-mvsx-scalar-memory): Rename debug switch to -mupper-regs-df.
(-mupper-regs-df): New debug switch to control whether DF values
can go in the traditional Altivec registers.
(-mupper-regs-sf): New debug switch to control whether SF values
can go in the traditional Altivec registers.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print wu, ww,
and wy constraints.
(rs6000_init_hard_regno_mode_ok): Use ssize_t instead of int for
loop variables. Rename -mvsx-scalar-memory to -mupper-regs-df.
Add new constraints, wu/ww/wy. Repurpose wv constraint.
(rs6000_debug_legitimate_address_p): Print if we are running
before, during, or after reload.
(rs6000_secondary_reload): Add a comment.
(rs6000_opt_masks): Add -mupper-regs-df, -mupper-regs-sf.
* config/rs6000/constraints.md (wa constraint): Sort w<x>
constraints. Update documentation string.
(wd constraint): Likewise.
(wf constraint): Likewise.
(wg constraint): Likewise.
(wn constraint): Likewise.
(ws constraint): Likewise.
(wt constraint): Likewise.
(wx constraint): Likewise.
(wz constraint): Likewise.
(wu constraint): New constraint for ISA 2.07 SFmode scalar
instructions.
(ww constraint): Likewise.
(wy constraint): Likewise.
(wv constraint): Repurpose ISA 2.07 constraint that did not use in
the previous submissions.
* doc/md.texi (PowerPC and IBM RS6000): Likewise.
Backport from mainline
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Only
restrict TImode addresses to single indirect registers if both
-mquad-memory and -mvsx-timode are used.
(rs6000_output_move_128bit): Use quad_load_store_p to determine if
we should emit load/store quad. Remove using %y for quad memory
addresses.
* config/rs6000/rs6000.md (mov<mode>_ppc64, TI/PTImode): Add
constraints to allow load/store quad on machines where TImode is
not allowed in VSX registers. Use 'n' instead of 'F' constraint
for TImode to load integer constants.
Backport from mainline
2013-10-02 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58587
* config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Turn off
setting -mvsx-timode by default until the underlying problem is
fixed.
(RS6000_CPU, power7 defaults): Likewise.
Backport from trunk
2013-08-16 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58160
* config/rs6000/predicates.md (fusion_gpr_mem_load): Allow the
memory rtx to contain ZERO_EXTEND and SIGN_EXTEND.
* config/rs6000/rs6000-protos.h (fusion_gpr_load_p): Pass operands
array instead of each individual operand as a separate argument.
(emit_fusion_gpr_load): Likewise.
(expand_fusion_gpr_load): Add new function declaration.
* config/rs6000/rs6000.c (fusion_gpr_load_p): Change the calling
signature to have the operands passed as an array, instead of as
separate arguments. Allow ZERO_EXTEND to be in the memory
address, and also SIGN_EXTEND if -mpower8-fusion-sign. Do not
depend on the register live/dead flags when peepholes are run.
(expand_fusion_gpr_load): New function to be called from the
peephole2 pass, to change the register that addis sets to be the
target register.
(emit_fusion_gpr_load): Change the calling signature to have the
operands passed as an array, instead of as separate arguments.
Allow ZERO_EXTEND to be in the memory address, and also
SIGN_EXTEND if -mpower8-fusion-sign.
* config/rs6000/rs6000.md (UNSPEC_FUSION_GPR): Delete unused
unspec enumeration.
(power8 fusion peephole/peephole2): Rework the fusion peepholes to
adjust the register addis loads up in the peephole2 pass. Do not
depend on the register live/dead state when the peephole pass is
done.
Backport from trunk
2013-07-23 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/vector.md (xor<mode>3): Move 128-bit boolean
expanders to rs6000.md.
(ior<mode>3): Likewise.
(and<mode>3): Likewise.
(one_cmpl<mode>2): Likewise.
(nor<mode>3): Likewise.
(andc<mode>3): Likewise.
(eqv<mode>3): Likewise.
(nand<mode>3): Likewise.
(orc<mode>3): Likewise.
* config/rs6000/rs6000-protos.h (rs6000_split_logical): New
declaration.
* config/rs6000/rs6000.c (rs6000_split_logical_inner): Add support
to split multi-word logical operations.
(rs6000_split_logical_di): Likewise.
(rs6000_split_logical): Likewise.
* config/rs6000/vsx.md (VSX_L2): Delete, no longer used.
(vsx_and<mode>3_32bit): Move 128-bit logical insns to rs6000.md,
and allow TImode operations in 32-bit.
(vsx_and<mode>3_64bit): Likewise.
(vsx_ior<mode>3_32bit): Likewise.
(vsx_ior<mode>3_64bit): Likewise.
(vsx_xor<mode>3_32bit): Likewise.
(vsx_xor<mode>3_64bit): Likewise.
(vsx_one_cmpl<mode>2_32bit): Likewise.
(vsx_one_cmpl<mode>2_64bit): Likewise.
(vsx_nor<mode>3_32bit): Likewise.
(vsx_nor<mode>3_64bit): Likewise.
(vsx_andc<mode>3_32bit): Likewise.
(vsx_andc<mode>3_64bit): Likewise.
(vsx_eqv<mode>3_32bit): Likewise.
(vsx_eqv<mode>3_64bit): Likewise.
(vsx_nand<mode>3_32bit): Likewise.
(vsx_nand<mode>3_64bit): Likewise.
(vsx_orc<mode>3_32bit): Likewise.
(vsx_orc<mode>3_64bit): Likewise.
* config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Always allow vector
logical types in GPRs.
* config/rs6000/altivec.md (altivec_and<mode>3): Move 128-bit
logical insns to rs6000.md, and allow TImode operations in
32-bit.
(altivec_ior<mode>3): Likewise.
(altivec_xor<mode>3): Likewise.
(altivec_one_cmpl<mode>2): Likewise.
(altivec_nor<mode>3): Likewise.
(altivec_andc<mode>3): Likewise.
* config/rs6000/rs6000.md (BOOL_128): New mode iterators and mode
attributes for moving the 128-bit logical operations into
rs6000.md.
(BOOL_REGS_OUTPUT): Likewise.
(BOOL_REGS_OP1): Likewise.
(BOOL_REGS_OP2): Likewise.
(BOOL_REGS_UNARY): Likewise.
(BOOL_REGS_AND_CR0): Likewise.
(one_cmpl<mode>2): Add support for DI logical operations on
32-bit, splitting the operations to 32-bit.
(anddi3): Likewise.
(iordi3): Likewise.
(xordi3): Likewise.
(and<mode>3, 128-bit types): Rewrite 2013-06-06 logical operator
changes to combine the 32/64-bit code, allow logical operations on
TI mode in 32-bit, and to use similar match_operator patterns like
scalar mode uses. Combine the Altivec and VSX code for logical
operations, and move it here.
(ior<mode>3, 128-bit types): Likewise.
(xor<mode>3, 128-bit types): Likewise.
(one_cmpl<mode>3, 128-bit types): Likewise.
(nor<mode>3, 128-bit types): Likewise.
(andc<mode>3, 128-bit types): Likewise.
(eqv<mode>3, 128-bit types): Likewise.
(nand<mode>3, 128-bit types): Likewise.
(orc<mode>3, 128-bit types): Likewise.
(and<mode>3_internal): Likewise.
(bool<mode>3_internal): Likewise.
(boolc<mode>3_internal1): Likewise.
(boolc<mode>3_internal2): Likewise.
(boolcc<mode>3_internal1): Likewise.
(boolcc<mode>3_internal2): Likewise.
(eqv<mode>3_internal1): Likewise.
(eqv<mode>3_internal2): Likewise.
(one_cmpl1<mode>3_internal): Likewise.
Back port from mainline:
2013-06-06 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* lib/target-supports.exp (check_p8vector_hw_available) Add power8
support.
(check_effective_target_powerpc_p8vector_ok): Likewise.
(is-effective-target): Likewise.
(check_vect_support_and_set_flags): Likewise.
Backport from mainline
2013-07-31 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/predicates.md (fusion_gpr_addis): New predicates
to support power8 load fusion.
(fusion_gpr_mem_load): Likewise.
* config/rs6000/rs6000-modes.def (PTImode): Update a comment.
* config/rs6000/rs6000-protos.h (fusion_gpr_load_p): New
declarations for power8 load fusion.
(emit_fusion_gpr_load): Likewise.
* config/rs6000/rs6000.c (rs6000_option_override_internal): If
tuning for power8, turn on fusion mode by default. Turn on sign
extending fusion mode if normal fusion mode is on, and we are at
-O2 or -O3.
(fusion_gpr_load_p): New function, return true if we can fuse an
addis instruction with a dependent load to a GPR.
(emit_fusion_gpr_load): Emit the instructions for power8 load
fusion to GPRs.
* config/rs6000/vsx.md (VSX_M2): New iterator for fusion
peepholes.
(VSX load fusion peepholes): New peepholes to fuse together an
addi instruction with a VSX load instruction.
* config/rs6000/rs6000.md (GPR load fusion peepholes): New
peepholes to fuse an addis instruction with a load to a GPR base
register. If we are supporting sign extending fusions, convert
sign extending loads to zero extending loads and add an explicit
sign extension.
Backport from mainline
2013-07-18 Pat Haugen <pthaugen@us.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Adjust flag
interaction for new Power8 flags and VSX.
Back port from the trunk
2013-06-28 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/57744
* config/rs6000/rs6000.h (MODES_TIEABLE_P): Do not allow PTImode
to tie with any other modes. Eliminate Altivec vector mode tests,
since these are a subset of ALTIVEC or VSX vector modes. Simplify
code, to return 0 if testing MODE2 for a condition, if we've
already tested MODE1 for the same condition.
Backport from mainline
2013-06-28 Pat Haugen <pthaugen@us.ibm.com>
* config/rs6000/rs6000.md (define_insn ""): Fix insn type.
Back port from the trunk
2013-06-26 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/power8.md: New.
* config/rs6000/rs6000-cpus.def (RS6000_CPU table): Adjust processor
setting for power8 entry.
* config/rs6000/t-rs6000 (MD_INCLUDES): Add power8.md.
* config/rs6000/rs6000.c (is_microcoded_insn, is_cracked_insn): Adjust
test for Power4/Power5 only.
(insn_must_be_first_in_group, insn_must_be_last_in_group): Add Power8
support.
(force_new_group): Adjust comment.
* config/rs6000/rs6000.md: Include power8.md.
Back port from the trunk
2013-06-14 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/57615
* config/rs6000/rs6000.md (mov<mode>_ppc64): Call
rs6000_output_move_128bit to handle emitting quad memory
operations. Set attribute length to 8 bytes.
Back port from the trunk
2013-06-13 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Move
test for clearing quad memory on 32-bit later.
Back port from the trunk
2013-06-12 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/rs6000.c (emit_load_locked): Add support for
power8 byte, half-word, and quad-word atomic instructions.
(emit_store_conditional): Likewise.
(rs6000_expand_atomic_compare_and_swap): Likewise.
(rs6000_expand_atomic_op): Likewise.
* config/rs6000/sync.md (larx): Add new modes for power8.
(stcx): Likewise.
(AINT): New mode iterator to include TImode as well as normal
integer modes on power8.
(fetchop_pred): Use int_reg_operand instead of gpc_reg_operand so
that VSX registers are not considered. Use AINT mode iterator
instead of INT1 to allow inclusion of quad word atomic operations
on power8.
(load_locked<mode>): Likewise.
(store_conditional<mode>): Likewise.
(atomic_compare_and_swap<mode>): Likewise.
(atomic_exchange<mode>): Likewise.
(atomic_nand<mode>): Likewise.
(atomic_fetch_<fetchop_name><mode>): Likewise.
(atomic_nand_fetch<mode>): Likewise.
(mem_thread_fence): Use gen_loadsync_<mode> instead of enumerating
each type.
(ATOMIC): On power8, add QImode, HImode modes.
(load_locked<QHI:mode>_si): Varients of load_locked for QI/HI
modes that promote to SImode.
(load_lockedti): Convert TImode arguments to PTImode, so that we
get a guaranteed even/odd register pair.
(load_lockedpti): Likewise.
(store_conditionalti): Likewise.
(store_conditionalpti): Likewise.
* config/rs6000/rs6000.md (QHI): New mode iterator for power8
atomic load/store instructions.
(HSI): Likewise.
Back port from the trunk
2013-06-10 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/vector.md (GPR move splitter): Do not split moves
of vectors in GPRS if they are direct moves or quad word load or
store moves.
* config/rs6000/rs6000-protos.h (rs6000_output_move_128bit): Add
declaration.
(direct_move_p): Likewise.
(quad_load_store_p): Likewise.
* config/rs6000/rs6000.c (enum rs6000_reg_type): Simplify register
classes into bins based on the physical register type.
(reg_class_to_reg_type): Likewise.
(IS_STD_REG_TYPE): Likewise.
(IS_FP_VECT_REG_TYPE): Likewise.
(reload_fpr_gpr): Arrays to determine what insn to use if we can
use direct move instructions.
(reload_gpr_vsx): Likewise.
(reload_vsx_gpr): Likewise.
(rs6000_init_hard_regno_mode_ok): Precalculate the register type
information that is a simplification of register classes. Also
precalculate direct move reload helpers.
(direct_move_p): New function to return true if the operation can
be done as a direct move instruciton.
(quad_load_store_p): New function to return true if the operation
is a quad memory operation.
(rs6000_legitimize_address): If quad memory, only allow register
indirect for TImode addresses.
(rs6000_legitimate_address_p): Likewise.
(enum reload_reg_type): Delete, replace with rs6000_reg_type.
(rs6000_reload_register_type): Likewise.
(register_to_reg_type): Return register type.
(rs6000_secondary_reload_simple_move): New helper function for
secondary reload and secondary memory needed to identify anything
that is a simple move, and does not need reloading.
(rs6000_secondary_reload_direct_move): New helper function for
secondary reload to identify cases that can be done with several
instructions via the direct move instructions.
(rs6000_secondary_reload_move): New helper function for secondary
reload to identify moves between register types that can be done.
(rs6000_secondary_reload): Add support for quad memory operations
and for direct move.
(rs6000_secondary_memory_needed): Likewise.
(rs6000_debug_secondary_memory_needed): Change argument names.
(rs6000_output_move_128bit): New function to return the move to
use for 128-bit moves, including knowing about the various
limitations of quad memory operations.
* config/rs6000/vsx.md (vsx_mov<mode>): Add support for quad
memory operations. call rs6000_output_move_128bit for the actual
instruciton(s) to generate.
(vsx_movti_64bit): Likewise.
* config/rs6000/rs6000.md (UNSPEC_P8V_FMRGOW): New unspec values.
(UNSPEC_P8V_MTVSRWZ): Likewise.
(UNSPEC_P8V_RELOAD_FROM_GPR): Likewise.
(UNSPEC_P8V_MTVSRD): Likewise.
(UNSPEC_P8V_XXPERMDI): Likewise.
(UNSPEC_P8V_RELOAD_FROM_VSX): Likewise.
(UNSPEC_FUSION_GPR): Likewise.
(FMOVE128_GPR): New iterator for direct move.
(f32_lv): New mode attribute for load/store of SFmode/SDmode
values.
(f32_sv): Likewise.
(f32_dm): Likewise.
(zero_extend<mode>di2_internal1): Add support for power8 32-bit
loads and direct move instructions.
(zero_extendsidi2_lfiwzx): Likewise.
(extendsidi2_lfiwax): Likewise.
(extendsidi2_nocell): Likewise.
(floatsi<mode>2_lfiwax): Likewise.
(lfiwax): Likewise.
(floatunssi<mode>2_lfiwzx): Likewise.
(lfiwzx): Likewise.
(fix_trunc<mode>_stfiwx): Likewise.
(fixuns_trunc<mode>_stfiwx): Likewise.
(mov<mode>_hardfloat, 32-bit floating point): Likewise.
(mov<move>_hardfloat64, 64-bit floating point): Likewise.
(parity<mode>2_cmpb): Set length/type attr.
(unnamed shift right patterns, mov<mode>_internal2): Change type attr
for 'mr.' to fast_compare.
(bpermd_<mode>): Change type attr to popcnt.
(p8_fmrgow_<mode>): New insns for power8 direct move support.
(p8_mtvsrwz_1): Likewise.
(p8_mtvsrwz_2): Likewise.
(reload_fpr_from_gpr<mode>): Likewise.
(p8_mtvsrd_1): Likewise.
(p8_mtvsrd_2): Likewise.
(p8_xxpermdi_<mode>): Likewise.
(reload_vsx_from_gpr<mode>): Likewise.
(reload_vsx_from_gprsf): Likewise.
(p8_mfvsrd_3_<mode>): LIkewise.
(reload_gpr_from_vsx<mode>): Likewise.
(reload_gpr_from_vsxsf): Likewise.
(p8_mfvsrd_4_disf): Likewise.
(multi-word GPR splits): Do not split direct moves or quad memory
operations.
Backport from the trunk
2013-06-06 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions):
Document new power8 builtins.
* config/rs6000/vector.md (and<mode>3): Add a clobber/scratch of a
condition code register, to allow 128-bit logical operations to be
done in the VSX or GPR registers.
(nor<mode>3): Use the canonical form for nor.
(eqv<mode>3): Add expanders for power8 xxleqv, xxlnand, xxlorc,
vclz*, and vpopcnt* vector instructions.
(nand<mode>3): Likewise.
(orc<mode>3): Likewise.
(clz<mode>2): LIkewise.
(popcount<mode>2): Likewise.
* config/rs6000/predicates.md (int_reg_operand): Rework tests so
that only the GPRs are recognized.
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add
support for new power8 builtins.
* config/rs6000/rs6000-builtin.def (xscvspdpn): Add new power8
builtin functions.
(xscvdpspn): Likewise.
(vclz): Likewise.
(vclzb): Likewise.
(vclzh): Likewise.
(vclzw): Likewise.
(vclzd): Likewise.
(vpopcnt): Likewise.
(vpopcntb): Likewise.
(vpopcnth): Likewise.
(vpopcntw): Likewise.
(vpopcntd): Likewise.
(vgbbd): Likewise.
(vmrgew): Likewise.
(vmrgow): Likewise.
(eqv): Likewise.
(eqv_v16qi3): Likewise.
(eqv_v8hi3): Likewise.
(eqv_v4si3): Likewise.
(eqv_v2di3): Likewise.
(eqv_v4sf3): Likewise.
(eqv_v2df3): Likewise.
(nand): Likewise.
(nand_v16qi3): Likewise.
(nand_v8hi3): Likewise.
(nand_v4si3): Likewise.
(nand_v2di3): Likewise.
(nand_v4sf3): Likewise.
(nand_v2df3): Likewise.
(orc): Likewise.
(orc_v16qi3): Likewise.
(orc_v8hi3): Likewise.
(orc_v4si3): Likewise.
(orc_v2di3): Likewise.
(orc_v4sf3): Likewise.
(orc_v2df3): Likewise.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Only
allow power8 quad mode in 64-bit.
(rs6000_builtin_vectorized_function): Add support to vectorize
ISA 2.07 count leading zeros, population count builtins.
(rs6000_expand_vector_init): On ISA 2.07 use xscvdpspn to form
V4SF vectors instead of xscvdpsp to avoid IEEE related traps.
(builtin_function_type): Add vgbbd builtin function which takes an
unsigned argument.
(altivec_expand_vec_perm_const): Add support for new power8 merge
instructions.
* config/rs6000/vsx.md (VSX_L2): New iterator for 128-bit types,
that does not include TImdoe for use with 32-bit.
(UNSPEC_VSX_CVSPDPN): Support for power8 xscvdpspn and xscvspdpn
instructions.
(UNSPEC_VSX_CVDPSPN): Likewise.
(vsx_xscvdpspn): Likewise.
(vsx_xscvspdpn): Likewise.
(vsx_xscvdpspn_scalar): Likewise.
(vsx_xscvspdpn_directmove): Likewise.
(vsx_and<mode>3): Split logical operations into 32-bit and
64-bit. Add support to do logical operations on TImode as well as
VSX vector types. Allow logical operations to be done in either
VSX registers or in general purpose registers in 64-bit mode. Add
splitters if GPRs were used. For AND, add clobber of CCmode to
allow use of ANDI on GPRs. Rewrite nor to use the canonical RTL
encoding.
(vsx_and<mode>3_32bit): Likewise.
(vsx_and<mode>3_64bit): Likewise.
(vsx_ior<mode>3): Likewise.
(vsx_ior<mode>3_32bit): Likewise.
(vsx_ior<mode>3_64bit): Likewise.
(vsx_xor<mode>3): Likewise.
(vsx_xor<mode>3_32bit): Likewise.
(vsx_xor<mode>3_64bit): Likewise.
(vsx_one_cmpl<mode>2): Likewise.
(vsx_one_cmpl<mode>2_32bit): Likewise.
(vsx_one_cmpl<mode>2_64bit): Likewise.
(vsx_nor<mode>3): Likewise.
(vsx_nor<mode>3_32bit): Likewise.
(vsx_nor<mode>3_64bit): Likewise.
(vsx_andc<mode>3): Likewise.
(vsx_andc<mode>3_32bit): Likewise.
(vsx_andc<mode>3_64bit): Likewise.
(vsx_eqv<mode>3_32bit): Add support for power8 xxleqv, xxlnand,
and xxlorc instructions.
(vsx_eqv<mode>3_64bit): Likewise.
(vsx_nand<mode>3_32bit): Likewise.
(vsx_nand<mode>3_64bit): Likewise.
(vsx_orc<mode>3_32bit): Likewise.
(vsx_orc<mode>3_64bit): Likewise.
* config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Update comment.
* config/rs6000/altivec.md (UNSPEC_VGBBD): Add power8 vgbbd
instruction.
(p8_vmrgew): Add power8 vmrgew and vmrgow instructions.
(p8_vmrgow): Likewise.
(altivec_and<mode>3): Add clobber of CCmode to allow AND using
GPRs to be split under VSX.
(p8v_clz<mode>2): Add power8 count leading zero support.
(p8v_popcount<mode>2): Add power8 population count support.
(p8v_vgbbd): Add power8 gather bits by bytes by doubleword
support.
* config/rs6000/rs6000.md (eqv<mode>3): Add support for powerp eqv
instruction.
* config/rs6000/altivec.h (vec_eqv): Add defines to export power8
builtin functions.
(vec_nand): Likewise.
(vec_vclz): Likewise.
(vec_vclzb): Likewise.
(vec_vclzd): Likewise.
(vec_vclzh): Likewise.
(vec_vclzw): Likewise.
(vec_vgbbd): Likewise.
(vec_vmrgew): Likewise.
(vec_vmrgow): Likewise.
(vec_vpopcnt): Likewise.
(vec_vpopcntb): Likewise.
(vec_vpopcntd): Likewise.
(vec_vpopcnth): Likewise.
(vec_vpopcntw): Likewise.
Backport from trunk
2013-05-29 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* config/rs6000/vector.md (VEC_I): Add support for new power8 V2DI
instructions.
(VEC_A): Likewise.
(VEC_C): Likewise.
(vrotl<mode>3): Likewise.
(vashl<mode>3): Likewise.
(vlshr<mode>3): Likewise.
(vashr<mode>3): Likewise.
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add
support for power8 V2DI builtins.
* config/rs6000/rs6000-builtin.def (abs_v2di): Add support for
power8 V2DI builtins.
(vupkhsw): Likewise.
(vupklsw): Likewise.
(vaddudm): Likewise.
(vminsd): Likewise.
(vmaxsd): Likewise.
(vminud): Likewise.
(vmaxud): Likewise.
(vpkudum): Likewise.
(vpksdss): Likewise.
(vpkudus): Likewise.
(vpksdus): Likewise.
(vrld): Likewise.
(vsld): Likewise.
(vsrd): Likewise.
(vsrad): Likewise.
(vsubudm): Likewise.
(vcmpequd): Likewise.
(vcmpgtsd): Likewise.
(vcmpgtud): Likewise.
(vcmpequd_p): Likewise.
(vcmpgtsd_p): Likewise.
(vcmpgtud_p): Likewise.
(vupkhsw): Likewise.
(vupklsw): Likewise.
(vaddudm): Likewise.
(vmaxsd): Likewise.
(vmaxud): Likewise.
(vminsd): Likewise.
(vminud): Likewise.
(vpksdss): Likewise.
(vpksdus): Likewise.
(vpkudum): Likewise.
(vpkudus): Likewise.
(vrld): Likewise.
(vsld): Likewise.
(vsrad): Likewise.
(vsrd): Likewise.
(vsubudm): Likewise.
* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Add
support for power8 V2DI instructions.
* config/rs6000/altivec.md (UNSPEC_VPKUHUM): Add support for
power8 V2DI instructions. Combine pack and unpack insns to use an
iterator for each mode. Check whether a particular mode supports
Altivec instructions instead of just checking TARGET_ALTIVEC.
(UNSPEC_VPKUWUM): Likewise.
(UNSPEC_VPKSHSS): Likewise.
(UNSPEC_VPKSWSS): Likewise.
(UNSPEC_VPKUHUS): Likewise.
(UNSPEC_VPKSHUS): Likewise.
(UNSPEC_VPKUWUS): Likewise.
(UNSPEC_VPKSWUS): Likewise.
(UNSPEC_VPACK_SIGN_SIGN_SAT): Likewise.
(UNSPEC_VPACK_SIGN_UNS_SAT): Likewise.
(UNSPEC_VPACK_UNS_UNS_SAT): Likewise.
(UNSPEC_VPACK_UNS_UNS_MOD): Likewise.
(UNSPEC_VUPKHSB): Likewise.
(UNSPEC_VUNPACK_HI_SIGN): Likewise.
(UNSPEC_VUNPACK_LO_SIGN): Likewise.
(UNSPEC_VUPKHSH): Likewise.
(UNSPEC_VUPKLSB): Likewise.
(UNSPEC_VUPKLSH): Likewise.
(VI2): Likewise.
(VI_char): Likewise.
(VI_scalar): Likewise.
(VI_unit): Likewise.
(VP): Likewise.
(VP_small): Likewise.
(VP_small_lc): Likewise.
(VU_char): Likewise.
(add<mode>3): Likewise.
(altivec_vaddcuw): Likewise.
(altivec_vaddu<VI_char>s): Likewise.
(altivec_vadds<VI_char>s): Likewise.
(sub<mode>3): Likewise.
(altivec_vsubcuw): Likewise.
(altivec_vsubu<VI_char>s): Likewise.
(altivec_vsubs<VI_char>s): Likewise.
(altivec_vavgs<VI_char>): Likewise.
(altivec_vcmpbfp): Likewise.
(altivec_eq<mode>): Likewise.
(altivec_gt<mode>): Likewise.
(altivec_gtu<mode>): Likewise.
(umax<mode>3): Likewise.
(smax<mode>3): Likewise.
(umin<mode>3): Likewise.
(smin<mode>3): Likewise.
(altivec_vpkuhum): Likewise.
(altivec_vpkuwum): Likewise.
(altivec_vpkshss): Likewise.
(altivec_vpkswss): Likewise.
(altivec_vpkuhus): Likewise.
(altivec_vpkshus): Likewise.
(altivec_vpkuwus): Likewise.
(altivec_vpkswus): Likewise.
(altivec_vpks<VI_char>ss): Likewise.
(altivec_vpks<VI_char>us): Likewise.
(altivec_vpku<VI_char>us): Likewise.
(altivec_vpku<VI_char>um): Likewise.
(altivec_vrl<VI_char>): Likewise.
(altivec_vsl<VI_char>): Likewise.
(altivec_vsr<VI_char>): Likewise.
(altivec_vsra<VI_char>): Likewise.
(altivec_vsldoi_<mode>): Likewise.
(altivec_vupkhsb): Likewise.
(altivec_vupkhs<VU_char>): Likewise.
(altivec_vupkls<VU_char>): Likewise.
(altivec_vupkhsh): Likewise.
(altivec_vupklsb): Likewise.
(altivec_vupklsh): Likewise.
(altivec_vcmpequ<VI_char>_p): Likewise.
(altivec_vcmpgts<VI_char>_p): Likewise.
(altivec_vcmpgtu<VI_char>_p): Likewise.
(abs<mode>2): Likewise.
(vec_unpacks_hi_v16qi): Likewise.
(vec_unpacks_hi_v8hi): Likewise.
(vec_unpacks_lo_v16qi): Likewise.
(vec_unpacks_hi_<VP_small_lc>): Likewise.
(vec_unpacks_lo_v8hi): Likewise.
(vec_unpacks_lo_<VP_small_lc>): Likewise.
(vec_pack_trunc_v8h): Likewise.
(vec_pack_trunc_v4si): Likewise.
(vec_pack_trunc_<mode>): Likewise.
* config/rs6000/altivec.h (vec_vaddudm): Add defines for power8
V2DI builtins.
(vec_vmaxsd): Likewise.
(vec_vmaxud): Likewise.
(vec_vminsd): Likewise.
(vec_vminud): Likewise.
(vec_vpksdss): Likewise.
(vec_vpksdus): Likewise.
(vec_vpkudum): Likewise.
(vec_vpkudus): Likewise.
(vec_vrld): Likewise.
(vec_vsld): Likewise.
(vec_vsrad): Likewise.
(vec_vsrd): Likewise.
(vec_vsubudm): Likewise.
(vec_vupkhsw): Likewise.
(vec_vupklsw): Likewise.
2013-05-22 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Add
documentation for the power8 crypto builtins.
* config/rs6000/t-rs6000 (MD_INCLUDES): Add crypto.md.
* config/rs6000/rs6000-builtin.def (BU_P8V_AV_1): Add support
macros for defining power8 builtin functions.
(BU_P8V_AV_2): Likewise.
(BU_P8V_AV_P): Likewise.
(BU_P8V_VSX_1): Likewise.
(BU_P8V_OVERLOAD_1): Likewise.
(BU_P8V_OVERLOAD_2): Likewise.
(BU_CRYPTO_1): Likewise.
(BU_CRYPTO_2): Likewise.
(BU_CRYPTO_3): Likewise.
(BU_CRYPTO_OVERLOAD_1): Likewise.
(BU_CRYPTO_OVERLOAD_2): Likewise.
(XSCVSPDP): Fix typo, point to the correct instruction.
(VCIPHER): Add power8 crypto builtins.
(VCIPHERLAST): Likewise.
(VNCIPHER): Likewise.
(VNCIPHERLAST): Likewise.
(VPMSUMB): Likewise.
(VPMSUMH): Likewise.
(VPMSUMW): Likewise.
(VPERMXOR_V2DI): Likewise.
(VPERMXOR_V4SI: Likewise.
(VPERMXOR_V8HI: Likewise.
(VPERMXOR_V16QI: Likewise.
(VSHASIGMAW): Likewise.
(VSHASIGMAD): Likewise.
(VPMSUM): Likewise.
(VPERMXOR): Likewise.
(VSHASIGMA): Likewise.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
__CRYPTO__ if the crypto instructions are available.
(altivec_overloaded_builtins): Add support for overloaded power8
builtins.
* config/rs6000/rs6000.c (rs6000_expand_ternop_builtin): Add
support for power8 crypto builtins.
(builtin_function_type): Likewise.
(altivec_init_builtins): Add support for builtins that take vector
long long (V2DI) arguments.
* config/rs6000/crypto.md: New file, define power8 crypto
instructions.
2013-05-22 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* doc/invoke.texi (Option Summary): Add power8 options.
(RS/6000 and PowerPC Options): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Update to use
constraints.md instead of rs6000.h. Reorder w* constraints. Add
wm, wn, wr documentation.
* gcc/config/rs6000/constraints.md (wm): New constraint for VSX
registers if direct move instructions are enabled.
(wn): New constraint for no registers.
(wq): New constraint for quad word even GPR registers.
(wr): New constraint if 64-bit instructions are enabled.
(wv): New constraint if power8 vector instructions are enabled.
(wQ): New constraint for quad word memory locations.
* gcc/config/rs6000/predicates.md (const_0_to_15_operand): New
constraint for 0..15 for crypto instructions.
(gpc_reg_operand): If VSX allow registers in VSX registers as well
as GPR and floating point registers.
(int_reg_operand): New predicate to match only GPR registers.
(base_reg_operand): New predicate to match base registers.
(quad_int_reg_operand): New predicate to match even GPR registers
for quad memory operations.
(vsx_reg_or_cint_operand): New predicate to allow vector logical
operations in both GPR and VSX registers.
(quad_memory_operand): New predicate for quad memory operations.
(reg_or_indexed_operand): New predicate for direct move support.
* gcc/config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED):
Inherit from ISA_2_4_MASKS, not ISA_2_2_MASKS.
(ISA_2_7_MASKS_SERVER): New mask for ISA 2.07 (i.e. power8).
(POWERPC_MASKS): Add power8 options.
(power8 cpu): Use ISA_2_7_MASKS_SERVER instead of specifying the
various options.
* gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
Define _ARCH_PWR8 and __POWER8_VECTOR__ for power8.
* gcc/config/rs6000/rs6000.opt (-mvsx-timode): Add documentation.
(-mpower8-fusion): New power8 options.
(-mpower8-fusion-sign): Likewise.
(-mpower8-vector): Likewise.
(-mcrypto): Likewise.
(-mdirect-move): Likewise.
(-mquad-memory): Likewise.
* gcc/config/rs6000/rs6000.c (power8_cost): Initial definition for
power8.
(rs6000_hard_regno_mode_ok): Make PTImode only match even GPR
registers.
(rs6000_debug_reg_print): Print the base register class if
-mdebug=reg.
(rs6000_debug_vector_unit): Add p8_vector.
(rs6000_debug_reg_global): If -mdebug=reg, print power8 constraint
definitions. Also print fusion state.
(rs6000_init_hard_regno_mode_ok): Set up power8 constraints.
(rs6000_builtin_mask_calculate): Add power8 builtin support.
(rs6000_option_override_internal): Add support for power8.
(rs6000_common_init_builtins): Add debugging for skipped builtins
if -mdebug=builtin.
(rs6000_adjust_cost): Add power8 support.
(rs6000_issue_rate): Likewise.
(insn_must_be_first_in_group): Likewise.
(insn_must_be_last_in_group): Likewise.
(force_new_group): Likewise.
(rs6000_register_move_cost): Likewise.
(rs6000_opt_masks): Likewise.
* config/rs6000/rs6000.h (ASM_CPU_POWER8_SPEC): If we don't have a
power8 capable assembler, default to power7 options.
(TARGET_DIRECT_MOVE): Likewise.
(TARGET_CRYPTO): Likewise.
(TARGET_P8_VECTOR): Likewise.
(VECTOR_UNIT_P8_VECTOR_P): Define power8 vector support.
(VECTOR_UNIT_VSX_OR_P8_VECTOR_P): Likewise.
(VECTOR_MEM_P8_VECTOR_P): Likewise.
(VECTOR_MEM_VSX_OR_P8_VECTOR_P): Likewise.
(VECTOR_MEM_ALTIVEC_OR_VSX_P): Likewise.
(TARGET_XSCVDPSPN): Likewise.
(TARGET_XSCVSPDPN): Likewsie.
(TARGET_SYNC_HI_QI): Likewise.
(TARGET_SYNC_TI): Likewise.
(MASK_CRYPTO): Likewise.
(MASK_DIRECT_MOVE): Likewise.
(MASK_P8_FUSION): Likewise.
(MASK_P8_VECTOR): Likewise.
(REG_ALLOC_ORDER): Move fr13 to be lower in priority so that the
TFmode temporary used by some of the direct move instructions to
get two FP temporary registers does not force creation of a stack
frame.
(VLOGICAL_REGNO_P): Allow vector logical operations in GPRs.
(MODES_TIEABLE_P): Move the VSX tests above the Altivec tests so
that any VSX registers are tieable, even if they are also an
Altivec vector mode.
(r6000_reg_class_enum): Add wm, wr, wv constraints.
(RS6000_BTM_P8_VECTOR): Power8 builtin support.
(RS6000_BTM_CRYPTO): Likewise.
(RS6000_BTM_COMMON): Likewise.
* config/rs6000/rs6000.md (cpu attribute): Add power8.
* config/rs6000/rs6000-opts.h (PROCESSOR_POWER8): Likewise.
(enum rs6000_vector): Add power8 vector support.
Backport from mainline
2013-03-20 Pat Haugen <pthaugen@us.ibm.com>
* config/rs6000/predicates.md (indexed_address, update_address_mem
update_indexed_address_mem): New predicates.
* config/rs6000/vsx.md (vsx_extract_<mode>_zero): Set correct "type"
attribute for load/store instructions.
* config/rs6000/dfp.md (movsd_store): Likewise.
(movsd_load): Likewise.
* config/rs6000/rs6000.md (zero_extend<mode>di2_internal1): Likewise.
(unnamed HI->DI extend define_insn): Likewise.
(unnamed SI->DI extend define_insn): Likewise.
(unnamed QI->SI extend define_insn): Likewise.
(unnamed QI->HI extend define_insn): Likewise.
(unnamed HI->SI extend define_insn): Likewise.
(unnamed HI->SI extend define_insn): Likewise.
(extendsfdf2_fpr): Likewise.
(movsi_internal1): Likewise.
(movsi_internal1_single): Likewise.
(movhi_internal): Likewise.
(movqi_internal): Likewise.
(movcc_internal1): Correct mnemonic for stw insn. Set correct "type"
attribute for load/store instructions.
(mov<mode>_hardfloat): Set correct "type" attribute for load/store
instructions.
(mov<mode>_softfloat): Likewise.
(mov<mode>_hardfloat32): Likewise.
(mov<mode>_hardfloat64): Likewise.
(mov<mode>_softfloat64): Likewise.
(movdi_internal32): Likewise.
(movdi_internal64): Likewise.
(probe_stack_<mode>): Likewise.
Backport from mainline
2013-03-20 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/vector.md (VEC_R): Add 32-bit integer, binary
floating point, and decimal floating point to reload iterator.
* config/rs6000/constraints.md (wl constraint): New constraints to
return FLOAT_REGS if certain options are used to reduce the number
of separate patterns that exist in the file.
(wx constraint): Likewise.
(wz constraint): Likewise.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.
* config/rs6000/rs6000.h (TARGET_NO_SDMODE_STACK): New macro)
(define as 1 if we are running on a power7 or newer.
(enum r6000_reg_class_enum): Add new constraints.
* config/rs6000/dfp.md (movsd): Delete, combine with binary
floating point moves in rs6000.md. Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg). Use LFIWZX
and STFIWX for loading SDmode on power7. Use xxlxor to create
0.0f.
(movsd splitter): Likewise.
(movsd_hardfloat): Likewise.
(movsd_softfloat): Likewise.
* config/rs6000/rs6000.md (FMOVE32): New iterators to combine
binary and decimal floating point moves.
(fmove_ok): New attributes to combine binary and decimal floating
point moves, and to combine power6x (mfpgpr) moves along normal
floating moves.
(real_value_to_target): Likewise.
(f32_lr): Likewise.
(f32_lm): Likewise.
(f32_li): Likewise.
(f32_sr): Likewise.
(f32_sm): Likewise.
(f32_si): Likewise.
(movsf): Combine binary and decimal floating point moves. Combine
power6x (mfpgpr) moves with other moves by using conditional
constraits (wg). Use LFIWZX and STFIWX for loading SDmode on
power7.
(mov<mode> for SFmode/SDmode); Likewise.
(SFmode/SDmode splitters): Likewise.
(movsf_hardfloat): Likewise.
(mov<mode>_hardfloat for SFmode/SDmode): Likewise.
(movsf_softfloat): Likewise.
(mov<mode>_softfloat for SFmode/SDmode): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wl)
(wx and wz constraints.
* config/rs6000/constraints.md (wg constraint): New constraint to
return FLOAT_REGS if -mmfpgpr (power6x) was used.
* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add wg
constraint.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.
* config/rs6000/dfp.md (movdd): Delete, combine with binary
floating point moves in rs6000.md. Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg). Use LFIWZX
and STFIWX for loading SDmode on power7.
(movdd splitters): Likewise.
(movdd_hardfloat32): Likewise.
(movdd_softfloat32): Likewise.
(movdd_hardfloat64_mfpgpr): Likewise.
(movdd_hardfloat64): Likewise.
(movdd_softfloat64): Likewise.
* config/rs6000/rs6000.md (FMOVE64): New iterators to combine
64-bit binary and decimal floating point moves.
(FMOVE64X): Likewise.
(movdf): Combine 64-bit binary and decimal floating point moves.
Combine power6x (mfpgpr) moves with other moves by using
conditional constraits (wg).
(mov<mode> for DFmode/DDmode): Likewise.
(DFmode/DDmode splitters): Likewise.
(movdf_hardfloat32): Likewise.
(mov<mode>_hardfloat32 for DFmode/DDmode): Likewise.
(movdf_softfloat32): Likewise.
(movdf_hardfloat64_mfpgpr): Likewise.
(movdf_hardfloat64): Likewise.
(mov<mode>_hardfloat64 for DFmode/DDmode): Likewise.
(movdf_softfloat64): Likewise.
(mov<mode>_softfloat64 for DFmode/DDmode): Likewise.
(reload_<mode>_load): Move to later in the file so they aren't in
the middle of the floating point move insns.
(reload_<mode>_store): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wg
constraint.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print out wg
constraint if -mdebug=reg.
(rs6000_initi_hard_regno_mode_ok): Enable wg constraint if
-mfpgpr. Enable using dd reload support if needed.
* config/rs6000/dfp.md (movtd): Delete, combine with 128-bit
binary and decimal floating point moves in rs6000.md.
(movtd_internal): Likewise.
* config/rs6000/rs6000.md (FMOVE128): Combine 128-bit binary and
decimal floating point moves.
(movtf): Likewise.
(movtf_internal): Likewise.
(mov<mode>_internal, TDmode/TFmode): Likewise.
(movtf_softfloat): Likewise.
(mov<mode>_softfloat, TDmode/TFmode): Likewise.
* config/rs6000/rs6000.md (movdi_mfpgpr): Delete, combine with
movdi_internal64, using wg constraint for move direct operations.
(movdi_internal64): Likewise.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print
MODES_TIEABLE_P for selected modes. Print the numerical value of
the various virtual registers. Use GPR/FPR first/last values)
(instead of hard coding the register numbers. Print which modes
have reload functions registered.
(rs6000_option_override_internal): If -mdebug=reg, trace the
options settings before/after setting cpu, target and subtarget
settings.
(rs6000_secondary_reload_trace): Improve the RTL dump for
-mdebug=addr and for secondary reload failures in
rs6000_secondary_reload_inner.
(rs6000_secondary_reload_fail): Likewise.
(rs6000_secondary_reload_inner): Likewise.
* config/rs6000/rs6000.md (FIRST_GPR_REGNO): Add convenience
macros for first/last GPR and FPR registers.
(LAST_GPR_REGNO): Likewise.
(FIRST_FPR_REGNO): Likewise.
(LAST_FPR_REGNO): Likewise.
* config/rs6000/vector.md (mul<mode>3): Use the combined macro
VECTOR_UNIT_ALTIVEC_OR_VSX_P instead of separate calls to
VECTOR_UNIT_ALTIVEC_P and VECTOR_UNIT_VSX_P.
(vcond<mode><mode>): Likewise.
(vcondu<mode><mode>): Likewise.
(vector_gtu<mode>): Likewise.
(vector_gte<mode>): Likewise.
(xor<mode>3): Don't allow logical operations on TImode in 32-bit
to prevent the compiler from converting DImode operations to
TImode.
(ior<mode>3): Likewise.
(and<mode>3): Likewise.
(one_cmpl<mode>2): Likewise.
(nor<mode>3): Likewise.
(andc<mode>3): Likewise.
* config/rs6000/constraints.md (wt constraint): New constraint
that returns VSX_REGS if TImode is allowed in VSX registers.
* config/rs6000/predicates.md (easy_fp_constant): 0.0f is an easy
constant under VSX.
* config/rs6000/rs6000-modes.def (PTImode): Define, PTImode is
similar to TImode, but it is restricted to being in the GPRs.
* config/rs6000/rs6000.opt (-mvsx-timode): New switch to allow
TImode to occupy a single VSX register.
* config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Default to
-mvsx-timode for power7/power8.
(power7 cpu): Likewise.
(power8 cpu): Likewise.
* config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Make
sure that TFmode/TDmode take up two registers if they are ever
allowed in the upper VSX registers.
(rs6000_hard_regno_mode_ok): If -mvsx-timode, allow TImode in VSX
registers.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_debug_reg_global): Add debugging for PTImode and wt
constraint. Print if LRA is turned on.
(rs6000_option_override_internal): Give an error if -mvsx-timode
and VSX is not enabled.
(invalid_e500_subreg): Handle PTImode, restricting it to GPRs. If
-mvsx-timode, restrict TImode to reg+reg addressing, and PTImode
to reg+offset addressing. Use PTImode when checking offset
addresses for validity.
(reg_offset_addressing_ok_p): Likewise.
(rs6000_legitimate_offset_address_p): Likewise.
(rs6000_legitimize_address): Likewise.
(rs6000_legitimize_reload_address): Likewise.
(rs6000_legitimate_address_p): Likewise.
(rs6000_eliminate_indexed_memrefs): Likewise.
(rs6000_emit_move): Likewise.
(rs6000_secondary_reload): Likewise.
(rs6000_secondary_reload_inner): Handle PTImode. Allow 64-bit
reloads to fpr registers to continue to use reg+offset addressing)
(but 64-bit reloads to altivec registers need reg+reg addressing.
Drop test for PRE_MODIFY, since VSX loads/stores no longer support
it. Treat LO_SUM like a PLUS operation.
(rs6000_secondary_reload_class): If type is 64-bit, prefer to use
FLOAT_REGS instead of VSX_RGS to allow use of reg+offset
addressing.
(rs6000_cannot_change_mode_class): Do not allow TImode in VSX
registers to share a register with a smaller sized type, since VSX
puts scalars in the upper 64-bits.
(print_operand): Add support for PTImode.
(rs6000_register_move_cost): Use VECTOR_MEM_VSX_P instead of
VECTOR_UNIT_VSX_P to catch types that can be loaded in VSX
registers, but don't have arithmetic support.
(rs6000_memory_move_cost): Add test for VSX.
(rs6000_opt_masks): Add -mvsx-timode.
* config/rs6000/vsx.md (VSm): Change to use 64-bit aligned moves
for TImode.
(VSs): Likewise.
(VSr): Use wt constraint for TImode.
(VSv): Drop TImode support.
(vsx_movti): Delete, replace with versions for 32-bit and 64-bit.
(vsx_movti_64bit): Likewise.
(vsx_movti_32bit): Likewise.
(vec_store_<mode>): Use VSX iterator instead of vector iterator.
(vsx_and<mode>3): Delete use of '?' constraint on inputs, just put
one '?' on the appropriate output constraint. Do not allow TImode
logical operations on 32-bit systems.
(vsx_ior<mode>3): Likewise.
(vsx_xor<mode>3): Likewise.
(vsx_one_cmpl<mode>2): Likewise.
(vsx_nor<mode>3): Likewise.
(vsx_andc<mode>3): Likewise.
(vsx_concat_<mode>): Likewise.
(vsx_xxpermdi_<mode>): Fix thinko for non V2DF/V2DI modes.
* config/rs6000/rs6000.h (MASK_VSX_TIMODE): Map from
OPTION_MASK_VSX_TIMODE.
(enum rs6000_reg_class_enum): Add RS6000_CONSTRAINT_wt.
(STACK_SAVEAREA_MODE): Use PTImode instead of TImode.
* config/rs6000/rs6000.md (INT mode attribute): Add PTImode.
(TI2 iterator): New iterator for TImode, PTImode.
(wd mode attribute): Add values for vector types.
(movti_string): Replace TI move operations with operations for
TImode and PTImode. Add support for TImode being allowed in VSX
registers.
(mov<mode>_string, TImode/PTImode): Likewise.
(movti_ppc64): Likewise.
(mov<mode>_ppc64, TImode/PTImode): Likewise.
(TI mode splitters): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wt
constraint.
[gcc/testsuite]
2014-04-04 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2013-11-22 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/59054
* gcc.target/powerpc/direct-move.h (VSX_REG_ATTR): Allow test to
specify an appropriate register class for VSX operations.
(load_vsx): Use it.
(load_gpr_to_vsx): Likewise.
(load_vsx_to_gpr): Likewise.
* gcc.target/powerpc/direct-move-vint1.c: Use an appropriate
register class for VSX registers that the type can handle. Remove
checks for explicit number of instructions generated, just check
if the instruction is generated.
* gcc.target/powerpc/direct-move-vint2.c: Likewise.
* gcc.target/powerpc/direct-move-float1.c: Likewise.
* gcc.target/powerpc/direct-move-float2.c: Likewise.
* gcc.target/powerpc/direct-move-double1.c: Likewise.
* gcc.target/powerpc/direct-move-double2.c: Likewise.
* gcc.target/powerpc/direct-move-long1.c: Likewise.
* gcc.target/powerpc/direct-move-long2.c: Likewise.
* gcc.target/powerpc/bool3-av.c: Limit to 64-bit mode for now.
* gcc.target/powerpc/bool3-p7.c: Likewise.
* gcc.target/powerpc/bool3-p8.c: Likewise.
* gcc.target/powerpc/p8vector-ldst.c: Just check that the
appropriate instructions are generated, don't check the count.
2013-11-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/59054
* gcc.target/powerpc/pr59054.c: New test.
2013-08-22 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/pr57744.c: Declare abort.
2013-07-18 Pat Haugen <pthaugen@us.ibm.com>
* gcc.target/powerpc/pr57744.c: Fix typo.
Back port from mainline
2013-10-03 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/p8vector-fp.c: New test for floating point
scalar operations when using -mupper-regs-sf and -mupper-regs-df.
* gcc.target/powerpc/ppc-target-1.c: Update tests to allow either
VSX scalar operations or the traditional floating point form of
the instruction.
* gcc.target/powerpc/ppc-target-2.c: Likewise.
* gcc.target/powerpc/recip-3.c: Likewise.
* gcc.target/powerpc/recip-5.c: Likewise.
* gcc.target/powerpc/pr72747.c: Likewise.
* gcc.target/powerpc/vsx-builtin-3.c: Likewise.
Back port from mainline
2013-09-27 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/p8vector-ldst.c: New test for -mupper-regs-sf
and -mupper-regs-df.
Back port from mainline
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* gcc.target/powerpc/pr58673-1.c: New file to test whether
-mquad-word + -mno-vsx-timode causes errors.
* gcc.target/powerpc/pr58673-2.c: Likewise.
Backport from trunk.
2013-07-23 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/bool2.h: New file, test the code generation
of logical operations for power5, altivec, power7, and power8 systems.
* gcc.target/powerpc/bool2-p5.c: Likewise.
* gcc.target/powerpc/bool2-av.c: Likewise.
* gcc.target/powerpc/bool2-p7.c: Likewise.
* gcc.target/powerpc/bool2-p8.c: Likewise.
* gcc.target/powerpc/bool3.h: Likewise.
* gcc.target/powerpc/bool3-av.c: Likewise.
* gcc.target/powerpc/bool2-p7.c: Likewise.
* gcc.target/powerpc/bool2-p8.c: Likewise.
Backport from trunk.
2013-07-31 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/fusion.c: New file, test power8 fusion support.
Back port from the trunk
2013-06-28 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/57744
* gcc.target/powerpc/pr57744.c: New test to make sure lqarx and
stqcx. get even registers.
Back port from the trunk
2013-06-12 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* gcc.target/powerpc/atomic-p7.c: New file, add tests for atomic
load/store instructions on power7, power8.
* gcc.target/powerpc/atomic-p8.c: Likewise.
Back port from the trunk
2013-06-10 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* gcc.target/powerpc/direct-move-vint1.c: New tests for power8
direct move instructions.
* gcc.target/powerpc/direct-move-vint2.c: Likewise.
* gcc.target/powerpc/direct-move.h: Likewise.
* gcc.target/powerpc/direct-move-float1.c: Likewise.
* gcc.target/powerpc/direct-move-float2.c: Likewise.
* gcc.target/powerpc/direct-move-double1.c: Likewise.
* gcc.target/powerpc/direct-move-double2.c: Likewise.
* gcc.target/powerpc/direct-move-long1.c: Likewise.
* gcc.target/powerpc/direct-move-long2.c: Likewise.
Backport from the trunk
2013-06-06 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* gcc.target/powerpc/p8vector-builtin-1.c: New test to test
power8 builtin functions.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-2.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-3.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-4.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-5.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-6.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-builtin-7.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-1.c: New
tests to test power8 auto-vectorization.
* gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-2.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-3.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-4.c: Likewise.
* gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-5.c: Likewise.
* gcc.target/powerpc/crypto-builtin-1.c: Use effective target
powerpc_p8vector_ok instead of powerpc_vsx_ok.
* gcc.target/powerpc/bool.c: New file, add eqv, nand, nor tests.
* lib/target-supports.exp (check_p8vector_hw_available) Add power8
support.
(check_effective_target_powerpc_p8vector_ok): Likewise.
(is-effective-target): Likewise.
(check_vect_support_and_set_flags): Likewise.
Backport from trunk
2013-05-22 Michael Meissner <meissner@linux.vnet.ibm.com>
Pat Haugen <pthaugen@us.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* gcc.target/powerpc/crypto-builtin-1.c: New file, test for power8
crypto builtins.
Backport from mainline
2013-03-20 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/mmfpgpr.c: New test.
* gcc.target/powerpc/sd-vsx.c: Likewise.
* gcc.target/powerpc/sd-pwr6.c: Likewise.
* gcc.target/powerpc/vsx-float0.c: Likewise.
From-SVN: r209087
tree-ssanames.c (make_ssa_name_fn): Fix assert.
2014-04-04 Richard Biener <rguenther@suse.de>
* tree-ssanames.c (make_ssa_name_fn): Fix assert.
From-SVN: r209080
re PR target/43751 (dsymutil is not called for fortran and, under some circumstances not for other FEs.)
2014-03-26 Dominique d'Humieres <dominiq@lps.ens.fr>
PR target/43751
* lib/prune.exp: Modify the regular express to prune
the new warnings introduced by r205679 on darwin9.
From-SVN: r209070
Daily bump.
From-SVN: r209067
Daily bump.
From-SVN: r209044
Daily bump.
From-SVN: r209006
gimple.h (struct gimple_statement_base): Align subcode to 16 bits.
2014-04-01 Richard Biener <rguenther@suse.de>
* gimple.h (struct gimple_statement_base): Align subcode to
16 bits.
From-SVN: r208977
* doc/invoke.texi (mapp-regs): Clarify.
From-SVN: r208974
Daily bump.
From-SVN: r208968
Daily bump.
From-SVN: r208952
Daily bump.
From-SVN: r208943
re PR fortran/60677 (FAIL: gfortran.dg/ichar_3.f90 -O (test for excess errors))
fortran/
PR fortran/60677
* trans-intrinsic.c (gfc_conv_intrinsic_ichar): Enlarge argument
list buffer.
From-SVN: r208932
Daily bump.
From-SVN: r208929
Daily bump.
From-SVN: r208885
Daily bump.
From-SVN: r208858
futex_bits.h: Include errno.h.
* config/linux/futex_bits.h: Include errno.h.
(sys_futex0): If syscall returns -1, return -errno rather than
-1.
From-SVN: r208856
re PR rtl-optimization/60452 (wrong code at -O1 with large offsets in the frame)
PR rtl-optimization/60452
* rtlanal.c (rtx_addr_can_trap_p_1): Fix head comment.
<case REG>: Return 1 for invalid offsets from the frame pointer.
From-SVN: r208838
Daily bump.
From-SVN: r208828
Daily bump.
From-SVN: r208801
Daily bump.
From-SVN: r208778
Daily bump.
From-SVN: r208768
Daily bump.
From-SVN: r208761
Daily bump.
From-SVN: r208742
config.host (v850*-*-*): Add to tmake_file instead of resetting it.
2014-03-20 Joel Sherrill <joel.sherrill@oarcorp.com>
* config.host (v850*-*-*): Add to tmake_file instead of resetting
it. This was removing the v850*-*-rtems* settings.
From-SVN: r208709
re PR target/60568 (lto1: internal compiler error: in insn_min_length, at config/i386/i386.md:1599)
PR target/60568
* config/i386/i386.c (x86_output_mi_thunk): Surround UNSPEC_GOT
into CONST, put pic register as first operand of PLUS. Use
gen_const_mem for both 32-bit and 64-bit PIC got loads.
From-SVN: r208707
sparc.c (sparc_do_work_around_errata): Implement work around for store forwarding issue in the FPU on the UT699.
* config/sparc/sparc.c (sparc_do_work_around_errata): Implement work
around for store forwarding issue in the FPU on the UT699.
* config/sparc/sparc.md (in_branch_delay): Return false for single FP
loads and operations if -mfix-ut699 is specified.
(divtf3_hq): Tweak attribute.
(sqrttf2_hq): Likewise.
From-SVN: r208696
Daily bump.
From-SVN: r208690
Daily bump.
From-SVN: r208671
re PR libstdc++/60564 ([C++11] The std::packaged_task constructor taking a reference to a functor does not copy its argument.)
PR libstdc++/60564
* include/std/future (__future_base::_Task_state<>): Change
constructors to template functions using perfect forwarding.
(__create_task_state): Use decayed type as stored task.
(packaged_task::packaged_task(_Fn&&)): Forward instead of moving.
* testsuite/30_threads/packaged_task/60564.cc: New.
From-SVN: r208655
sparc.c (sparc_do_work_around_errata): Speed up and use proper constant for the store mode.
* config/sparc/sparc.c (sparc_do_work_around_errata): Speed up and use
proper constant for the store mode.
From-SVN: r208639
Daily bump.
From-SVN: r208627
backport: re PR rtl-optimization/57425 (RTL alias analysis unprepared to handle stack slot sharing)
gcc/
2014-03-17 Mikael Pettersson <mikpelinux@gmail.com>
Committed by Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline:
2013-06-20 Joern Rennecke <joern.rennecke@embecosm.com>
PR rtl-optimization/57425
PR rtl-optimization/57569
* alias.c (write_dependence_p): Remove parameters mem_mode and
canon_mem_addr. Add parameters x_mode, x_addr and x_canonicalized.
Changed all callers.
(canon_anti_dependence): Get comments and semantics in sync.
Add parameter mem_canonicalized. Changed all callers.
* rtl.h (canon_anti_dependence): Update prototype.
2013-06-16 Joern Rennecke <joern.rennecke@embecosm.com>
PR rtl-optimization/57425
PR rtl-optimization/57569
* alias.c (write_dependence_p): Add new parameters mem_mode,
canon_mem_addr and mem_canonicalized. Change type of writep to bool.
Changed all callers.
(canon_anti_dependence): New function.
* cse.c (check_dependence): Use canon_anti_dependence.
* cselib.c (cselib_invalidate_mem): Likewise.
* rtl.h (canon_anti_dependence): Declare.
gcc/testsuite/
2014-03-17 Mikael Pettersson <mikpelinux@gmail.com>
Committed by Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline:
2013-06-16 Joern Rennecke <joern.rennecke@embecosm.com>
PR rtl-optimization/57425
PR rtl-optimization/57569
* gcc.dg/torture/pr57425-1.c, gcc.dg/torture/pr57425-2.c: New files.
* gcc.dg/torture/pr57425-3.c, gcc.dg/torture/pr57569.c: Likewise.
Co-Authored-By: Bill Schmidt <wschmidt@linux.vnet.ibm.com>
From-SVN: r208620
backport: re PR middle-end/60429 (Miscompilation (aliasing) with -finline-functions)
2014-03-17 Richard Biener <rguenther@suse.de>
Backport from mainline
2014-03-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/60429
PR tree-optimization/60485
* tree-ssa-structalias.c (set_union_with_increment): Properly
take into account all fields that overlap the shifted vars.
(do_sd_constraint): Likewise.
(do_ds_constraint): Likewise.
(get_constraint_for_ptr_offset): Likewise.
* gcc.dg/pr60485-1.c: New testcase.
* gcc.dg/pr60485-2.c: Likewise.
From-SVN: r208615
Daily bump.
From-SVN: r208608
Daily bump.
From-SVN: r208601
sparc-protos.h (tls_call_delay): Delete.
* config/sparc/sparc-protos.h (tls_call_delay): Delete.
(eligible_for_call_delay): New prototype.
* config/sparc/sparc.c (tls_call_delay): Rename into...
(eligible_for_call_delay): ...this. Return false if the instruction
cannot be put in the delay slot of a branch.
(eligible_for_restore_insn): Simplify.
(eligible_for_return_delay): Return false if the instruction cannot be
put in the delay slot of a branch and simplify.
(eligible_for_sibcall_delay): Return false if the instruction cannot be
put in the delay slot of a branch.
* config/sparc/sparc.md (fix_ut699): New attribute.
(tls_call_delay): Delete.
(in_call_delay): Reimplement.
(eligible_for_sibcall_del1ay): Rename into...
(in_sibcall_delay): ...this.
(eligible_for_return_delay): Rename into...
(in_return_delay): ...this.
(in_branch_delay): Reimplement.
(in_uncond_branch_delay): Delete.
(in_annul_branch_delay): Delete.
From-SVN: r208598
backport: re PR fortran/58324 (Bogus END-of-line error with list-directed I/O of file without trailing sequential record marker)
2014-03-15 Jerry DeLisle <jvdelisle@gcc.gnu>
Backport from mainline
PR libfortran/58324
* gfortran.dg/list_read_12.f90: New test.
From-SVN: r208596
backport: re PR fortran/58324 (Bogus END-of-line error with list-directed I/O of file without trailing sequential record marker)
2014-03-15 Jerry DeLisle <jvdelisle@gcc.gnu>
Backport from mainline
PR libfortran/58324
PR libfortran/38199
* io/list_read.c (finish_list_read): Read one character to check
for the end of the file. If it is the end, then issue the file
end error message. If not, use eat_line to reach the end
without giving error. The next attempt to read will then
issue the error as described above.
* io/read.c (read_decimal): Quickly skip spaces to avoid calls
to next_char.
* io/unit.c (is_trim_ok): New helper function to check various
conditions to see if its OK to trim the internal unit string.
(get_internal_unit): Use LEN_TRIM to shorten selected internal
unit strings for optimizing READ. Enable this optimization for
formatted READ.
From-SVN: r208595
Daily bump.
From-SVN: r208584
Daily bump.
From-SVN: r208560
re PR ada/51483 (cstand.adb:Register_Float_Type makes invalid assumption about FP modes)
PR ada/51483
* back_end.ads (Register_Type_Proc): Add 'precision' parameter.
* cstand.adb (Register_Float_Type): Add 'precision' parameter and use
it to set the RM size. Use directly 'size' for the Esize.
* gcc-interface/gigi.h (enumerate_modes): Add integer parameter.
* gcc-interface/misc.c (enumerate_modes): Likewise. Do not register
types for vector modes, pass the size in addition to the precision.
From-SVN: r208547
backport: re PR target/60486 ([avr] superfluous or missing comparision after addition or subtraction)
Backport from 2014-03-13 trunk r208532.
PR target/60486
* config/avr/avr.c (avr_out_plus): Swap cc_plus and cc_minus in
calls of avr_out_plus_1.
From-SVN: r208534
backport: re PR tree-optimization/60454 (Code mistakenly detected as doing bswap)
2014-03-13 Joey Ye <joey.ye@arm.com>
Backport from mainline
2014-03-12 Thomas Preud'homme <thomas.preudhomme@arm.com>
PR tree-optimization/60454
* tree-ssa-math-opts.c (find_bswap_1): Fix bswap detection.
testsuite:
* gcc.c-torture/execute/pr60454.c: New test.
From-SVN: r208529
Daily bump.
From-SVN: r208524
PR libstdc++/59392: Fix ARM EABI uncaught throw from unexpected exception handler
libstdc++-v3/
PR libstdc++/59392
* libsupc++/eh_call.cc (__cxa_call_unexpected): Call __do_catch with
the address of a null pointer, not with a null pointer to pointer.
Copy comment for this case from eh_personality.cc:__cxa_call_unexpected.
* testsuite/18_support/bad_exception/59392.cc: New file.
Co-Authored-By: Mark Seaborn <mseaborn@google.com>
From-SVN: r208520
Daily bump.
From-SVN: r208503
projects / thirdparty / gcc.git / log
