The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a bad calculation.
This will fix the return value of copy_to_user in a specific faulting case.
The behaviour of memcpy stays unchanged.
Fixes: 957077048009 ("sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Oracle SPARC T4-1 Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-4-1ca72dda195b@mkarcher.dialup.fu-berlin.de Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations and a broken epilogue in the exception handlers. This will
prevent crashes and ensure correct return values of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.
Fixes: 7ae3aaf53f16 ("sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on SPARC T4 with modified kernel to use Niagara 1 code Tested-by: Magnus Lindholm <linmag7@gmail.com> # on Sun Fire T2000 Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Tested-by: Ethan Hawke <ehawk@ember.systems> # on Sun Fire T2000 Tested-by: Ken Link <iissmart@numberzero.org> # on Sun Fire T1000 Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-3-1ca72dda195b@mkarcher.dialup.fu-berlin.de Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios
enabled resulted from copy_from_user() returning impossibly large values
greater than the size to be copied. This lead to __copy_from_iter()
returning impossible values instead of the actual number of bytes it was
able to copy.
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. The exception handlers expect that
%o2 has already been masked during the bulk copy loop, but the masking was
performed after that loop. This will fix the return value of copy_from_user
and copy_to_user in the faulting case. The behaviour of memcpy stays
unchanged.
Fixes: ee841d0aff64 ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Sun Netra 240 Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Tested-by: René Rebe <rene@exactcode.com> # on UltraSparc III+ and UltraSparc IIIi Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-2-1ca72dda195b@mkarcher.dialup.fu-berlin.de Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.
Fixes: cb736fdbb208 ("sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on QEMU 10.0.3 Tested-by: René Rebe <rene@exactcode.com> # on Ultra 5 UltraSparc IIi Tested-by: Jonathan 'theJPster' Pallant <kernel@thejpster.org.uk> # on Sun Netra T1 Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-1-1ca72dda195b@mkarcher.dialup.fu-berlin.de Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ieee80211_rx_handle_packet(), if the caller does not provide pubsta
information, an attempt is made to find the station using the address 2
(source address) field in the header. Since pubsta is missing, link
information such as link_valid and link_id is also unavailable. Now if such
a situation comes, and if a matching ML station entry is found based on
the source address, currently the packet is dropped due to missing link ID
in the status field which is not correct.
Hence, to fix this issue, if link_valid is not set and the station is an
ML station, make an attempt to find a link station entry using the source
address. If a valid link station is found, derive the link ID and proceed
with packet processing. Otherwise, drop the packet as per the existing
flow.
Fixes: ea9d807b5642 ("wifi: mac80211: add link information in ieee80211_rx_status") Suggested-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250917-fix_data_packet_rx_with_mlo_and_no_pubsta-v1-1-8cf971a958ac@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit e57b7d62a1b2 ("wifi: ath10k: poll service ready message before
failing") works around the failure in waiting for the service ready
message by active polling. Note the polling is triggered after initial
wait timeout, which means that the wait-till-timeout can not be avoided
even the message is ready.
A possible fix is to do polling once before wait as well, however this
can not handle the race that the message arrives right after polling.
So the solution is to do periodic polling until timeout.
Section heading for sched_waking histogram is shown as normal paragraph
instead due to codeblock marker for the following diagram being in the
same line as the section underline. Separate them.
Fixes: daceabf1b494 ("tracing/doc: Fix ascii-art in histogram-design.rst") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250916054202.582074-5-bagasdotme@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When computing the delta, the sa_local_svc_timeout_ms is read without
ib_nl_request_lock held. Though unlikely in practice, this can cause
a race condition if multiple local service threads are managing the
timeout.
Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink") Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Edward Srouji <edwards@nvidia.com> Link: https://patch.msgid.link/20250916163112.98414-1-edwards@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, if the next-hop netdevice does not support ARP resolution,
the destination MAC address is silently set to zero without reporting
an error. This leads to incorrect behavior and may result in packet
transmission failures.
Fix this by deferring MAC resolution to the IP stack via neighbour
lookup, allowing proper resolution or error reporting as appropriate.
Fixes: 7025fcd36bd6 ("IB: address translation to map IP toIB addresses (GIDs)") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Signed-off-by: Edward Srouji <edwards@nvidia.com> Link: https://patch.msgid.link/20250916111103.84069-3-edwards@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
When the data layout is something like this:
dnode1: dnode2:
[0] A [0] NEW_ADDR
[1] A+1 [1] 0x0
...
[1016] A+1016
[1017] B (B!=A+1017) [1017] 0x0
During precache_extents, we map the last block(valid blkaddr) in dnode1:
map->m_flags |= F2FS_MAP_MAPPED;
map->m_pblk = blkaddr(valid blkaddr);
map->m_len = 1;
then we goto next_dnode, meet the first block in dnode2(hole), goto sync_out:
map->m_flags & F2FS_MAP_MAPPED == true, and we make zero-sized extent:
Rebased on patch[1], this patch can cover these cases to avoid zero-sized extent:
A,B,C is valid blkaddr
case1:
dnode1: dnode2:
[0] A [0] NEW_ADDR
[1] A+1 [1] 0x0
... ....
[1016] A+1016
[1017] B (B!=A+1017) [1017] 0x0
case2:
dnode1: dnode2:
[0] A [0] C (C!=B+1)
[1] A+1 [1] C+1
... ....
[1016] A+1016
[1017] B (B!=A+1017) [1017] 0x0
case3:
dnode1: dnode2:
[0] A [0] C (C!=B+2)
[1] A+1 [1] C+1
... ....
[1015] A+1015
[1016] B (B!=A+1016)
[1017] B+1 [1017] 0x0
Change the error code EAGAIN to -EAGAIN in START_SP_W_RETRIES() to align
with qla2x00_start_sp() returning negative error codes or QLA_SUCCESS,
preventing logical errors. Additionally, the '_rval' variable should
store negative error codes to conform to Linux kernel error code
conventions.
Fixes: 9803fb5d2759 ("scsi: qla2xxx: Fix task management cmd failure") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-3-rongqianfeng@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the error code EAGAIN to -EAGAIN in qla24xx_sadb_update() and
qla_edif_process_els() to align with qla2x00_start_sp() returning
negative error codes or QLA_SUCCESS, preventing logical errors.
Fixes: 0b3f3143d473 ("scsi: qla2xxx: edif: Add retry for ELS passthrough") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-2-rongqianfeng@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There appears to be a cut-n-paste error with the incorrect field
ndr_desc->numa_node being reported for the target node. Fix this by
using ndr_desc->target_node instead.
Fixes: f060db99374e ("ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the destroy CM ID timeout kicks in, you typically get a storm of
them which creates a log flooding. Hence, change pr_err() to
pr_err_ratelimited() in cm_destroy_id_wait_timeout().
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation") Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change 'ret' from unsigned long to int, as storing negative error codes
in an unsigned long makes it never equal to -ETIMEDOUT, causing logical
errors.
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/671100/ Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 64484ccee7af ("ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks") Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-4-tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.
This patch corrects the input mapping to the certain default value if
an invalid value is passed.
Fixes: 063422ca2a9d ("ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks") Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-3-tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an invalid value is passed via quirk option, currently
bytcht_es8316 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 249d2fc9e55c ("ASoC: Intel: bytcht_es8316: Set card long_name based on quirks") Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-2-tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case.
There is a dev_err message that is reporting the value of
cmd->asiv_length when it should be reporting cmd->asv_length
instead. Fix this.
Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20250902113712.2624743-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67bacba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2") Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed. While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.
The world regulatory domain is a restrictive subset of channel
configurations which allows legal operation of the adapter all over the
world. Changing to this domain should not be prevented.
Fixes: dd4a9ac05c8e1 ("mwifiex: send regulatory domain info to firmware only if alpha2 changed") changed Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Link: https://patch.msgid.link/20250804-fix-mwifiex-regulatory-domain-v1-1-e4715c770c4d@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Port of commit 227545b9a08c ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f1074 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ecec ("drm amdgpu: SI UVD v3_1 (v2)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.
Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.
Fixes: a9864bae1806 ("crypto: hisilicon/zip - add zip comp high perf mode configuration") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building with a reduced stack warning limit shows that delta_mjpeg_decode()
copies a giant structure to the stack each time but only uses three of
its members:
drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c: In function 'delta_mjpeg_decode':
drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c:427:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Open-code the passing of the structure members that are actually used here.
Change the 'ret' variable from u16 to int to store negative error codes or
zero returned by lx_message_send_atomic().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Fixes: 02bec4904508 ("ALSA: lx6464es - driver for the digigram lx6464es interface") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Link: https://patch.msgid.link/20250828081312.393148-1-rongqianfeng@vivo.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached.
Fixes: f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Compile-testing this driver is only possible when the AMBA bus driver is
available in the kernel:
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_remove':
nomadik-rng.c:(.text+0x67): undefined reference to `amba_release_regions'
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_probe':
nomadik-rng.c:(.text+0xee): undefined reference to `amba_request_regions'
x86_64-linux-ld: nomadik-rng.c:(.text+0x18d): undefined reference to `amba_release_regions'
The was previously implied by the 'depends on ARCH_NOMADIK', but needs to be
specified for the COMPILE_TEST case.
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it.
GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.
drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
1411 | unsigned offset, i, level;
| ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1
level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.
Fixes: 60b212f8ddcd ("drm/radeon: overhaul texture checking. (v3)") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Brahmajit Das <listout@listout.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix bug in nt35560_set_brightness() which causes the function to
erroneously report an error. mipi_dsi_dcs_write() returns either a
negative value when an error occurred or a positive number of bytes
written when no error occurred. The buggy code reports an error under
either condition.
Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel") Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Brigham Campbell <me@brighamcampbell.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250731032343.1258366-2-me@brighamcampbell.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time") Reported-by: Yinhao Hu <dddddd@hust.edu.cn> Reported-by: Kaiyan Mei <M202472210@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.
Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM") Co-developed-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.
Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.
Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.
As reported by LKP, the Qualcomm LMH driver needs to include several
IRQ-related headers, which decrlare necessary IRQ functionality.
Currently driver builds on ARM64 platforms, where the headers are pulled
in implicitly by other headers, but fails to build on other platforms.
Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507270042.KdK0KKht-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-2-33bc58388ca5@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The QCOM_SCM symbol is not user-visible, so it makes little sense to
depend on it. Make LMH driver select QCOM_SCM as all other drivers do
and, as the dependecy is now correctly handled, enable || COMPILE_TEST
in order to include the driver into broader set of build tests.
Fixes: 9e5a4fb84230 ("thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-1-33bc58388ca5@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Distinct between fan speed setting request coming for hwmon and
thermal subsystems.
There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'mlxreg_fan_pwm', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem.
The purpose is to make arbitration of fan speed setting. For example, if
fan speed required to be not lower than some limit, such setting is to
be performed through 'hwmon' subsystem, thus 'thermal' subsystem will
not set fan below this limit.
Currently, the 'last_thermal_state' is also be updated by 'hwmon' causing
cooling state to never be set to a lower value.
Eliminate update of 'last_thermal_state', when request is coming from
'hwmon' subsystem.
Fixes: da74944d3a46 ("hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limit") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20250113084859.27064-2-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit d5094bcb5bfd ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit 94c467ddb273 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5bfd ("tools/nolibc: define time_t in terms of __kernel_old_time_t") Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit] Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The smp_call_function_many() kerneldoc comment got out of sync with the
function definition (bool parameter "wait" is incorrectly described as a
bitmask in it), so fix it up by copying the "wait" description from the
smp_call_function() kerneldoc and add information regarding the handling
of the local CPU to it.
Fixes: 49b3bd213a9f ("smp: Fix all kernel-doc warnings") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7 Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
In svc_i3c_master_handle_ibi(), an IBI slot is fetched from the pool
to store the IBI payload. However, when an error condition is encountered,
the function returns without recycling the IBI slot, resulting in an IBI
slot leak.
Fixes: c85e209b799f ("i3c: master: svc: fix ibi may not return mandatory data byte") Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250829012309.3562585-3-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver wants to nack the IBI request when the target is not in the
known address list. In below code, svc_i3c_master_nack_ibi() will
cause undefined behavior when using AUTOIBI with auto response rule,
because hw always auto ack the IBI request.
switch (ibitype) {
case SVC_I3C_MSTATUS_IBITYPE_IBI:
dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
svc_i3c_master_nack_ibi(master);
...
break;
AutoIBI has another issue that the controller doesn't quit AutoIBI state
after IBIWON polling timeout when there is a SDA glitch(high->low->high).
1. SDA high->low: raising an interrupt to execute IBI ISR
2. SDA low->high
3. Driver writes an AutoIBI request
4. AutoIBI process does not start because SDA is not low
5. IBIWON polling times out
6. Controller reamins in AutoIBI state and doesn't accept EmitStop request
Emitting broadcast address with IBIRESP_MANUAL avoids both issues.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250829012309.3562585-2-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.
Fixes: 710c69dbaccd ("nvmet-fc: avoid deadlock on delete association path") Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function set_prescale_div() is responsible for calculating the clock
divisor settings such that the input clock rate is divided down such that
the required period length is at most 0x10000 clock ticks. If period_cycles
is an integer multiple of 0x10000, the divisor period_cycles / 0x10000 is
good enough. So round up in the calculation of the required divisor and
compare it using >= instead of >.
This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from main SPM handling") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b31 ("null_blk: add module parameters for 4 options") Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned
int to int, as it needs to store either negative error codes or zero
returned by sh_pfc_pinconf_set().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Fixes: d0593c363f04ccc4 ("pinctrl: sh-pfc: Propagate errors on group config") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a4918e ("power: supply: cw2015: Use device managed API to simplify the code") Signed-off-by: Andy Yan <andyshrk@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid.
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.
Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing. Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Fixes: 0fbeae70ee7c ("regulator: add SCMI driver") Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.
Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.
Fix function comment to match tmp variables actually used.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 28eb1d40fe57 ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes") Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.
Fixes: 477e19dedc9d ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.
Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.
Fixes: 15b3bf61b8d4 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS") Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init(). Free it as appropriate.
Fixes: 3d339dcbb56d ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure") Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6df1 ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb8692272 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Based on a bisect, it appears that commit 7ee988770326 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:
FAILED: Wrong stats Expected 10 calls, got 8
It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().
A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.
Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.
Fixes: 435f90a338ae ("selftests/bpf: add a test case for sock_ops perf-event notification") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node. Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.
Already do real negotiation in smb_direct_handle_connect_request()
where we see the requested initiator_depth and responder_resources
from the client.
We should detect legacy iwarp clients using MPA v1
with the custom IRD/ORD negotiation.
We need to send the custom IRD/ORD in big endian,
but we need to try to let clients with broken requests
using little endian (older cifs.ko) to work.
Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: linux-rdma@vger.kernel.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension") Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b2545e ("kselftests/arm64: add PAuth test for whether exec() changes keys") Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally the tracee starts in SECCOMP_NOTIFY_INIT, sends an
event to the tracer, and starts to wait interruptibly. With
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV, if the tracer receives the
message (SECCOMP_NOTIFY_SENT is reached) while the tracee was waiting
and is subsequently interrupted, the tracee begins to wait again
uninterruptibly (but killable).
This fails if SECCOMP_NOTIFY_REPLIED is reached before the tracee
is interrupted, as the check only considered SECCOMP_NOTIFY_SENT as a
condition to begin waiting again. In this case the tracee is interrupted
even though the tracer already acted on its behalf. This breaks the
assumption SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV wanted to ensure,
namely that the tracer can be sure the syscall is not interrupted or
restarted on the tracee after it is received on the tracer. Fix this
by also considering SECCOMP_NOTIFY_REPLIED when evaluating whether to
switch to uninterruptible waiting.
With the condition changed the loop in seccomp_do_user_notification()
would exit immediately after deciding that noninterruptible waiting
is required if the operation already reached SECCOMP_NOTIFY_REPLIED,
skipping the code that processes pending addfd commands first. Prevent
this by executing the remaining loop body one last time in this case.
Fixes: c2aa2dfef243 ("seccomp: Add wait_killable semantic to seccomp user notifier") Reported-by: Ali Polatel <alip@chesswob.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220291 Signed-off-by: Johannes Nixdorf <johannes@nixdorf.dev> Link: https://lore.kernel.org/r/20250725-seccomp-races-v2-1-cf8b9d139596@nixdorf.dev Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
INITRAMFS_PRESERVE_MTIME is only used in init/initramfs.c and
init/initramfs_test.c. Hence add a dependency on BLK_DEV_INITRD, to
prevent asking the user about this feature when configuring a kernel
without initramfs support.
Fixes: 1274aea127b2e8c9 ("initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
spin_lock(&m->req_lock)
...
// second remove
list_del(&req->req_list);
spin_unlock(&m->req_lock)
...
Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list in
p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem
client where the req_list could be deleted simultaneously by both
p9_read_work and p9_fd_cancelled functions, but for the case where req->status
equals REQ_STATUS_RCVD.
Update the check for req->status in p9_fd_cancelled to skip processing not
just received requests, but anything that is not SENT, as whatever
changed the state from SENT also removed the request from its list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: afd8d6541155 ("9P: Add cancelled() to the transport functions.") Cc: stable@vger.kernel.org Signed-off-by: Nalivayko Sergey <Sergey.Nalivayko@kaspersky.com>
Message-ID: <20250715154815.3501030-1-Sergey.Nalivayko@kaspersky.com>
[updated the check from status == RECV || status == ERROR to status != SENT] Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices with power.no_pm set are not expected to need any power
management at all, so modify device_set_pm_not_required() to set
power.no_callbacks for them too in case runtime PM will be enabled
for any of them (which in principle may be done for convenience if
such a device participates in a dependency chain).
Since device_set_pm_not_required() must be called before device_add()
or it would not have any effect, it can update power.no_callbacks
without locking, unlike pm_runtime_no_callbacks() that can be called
after registering the target device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@kernel.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/1950054.tdWV9SEqCh@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
