Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev().
Fixes: d3413703d5f8 ("Bluetooth: ISO: Add support to bind to trigger PAST") Reported-by: Sashiko <sashiko-bot@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
hci_get_route() returns a reference-counted hci_dev pointer via
hci_dev_hold(). The function exits normally or with an error without ever
releasing it.
Fixes: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Reported-by: Sashiko <sashiko-bot@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bharath Reddy [Mon, 1 Jun 2026 03:24:26 +0000 (08:54 +0530)]
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device.
Reported-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=535ecc844591e50588a5 Tested-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com Fixes: 1d6123102e9f ("Bluetooth: hci_core: Fix use-after-free in vhci_flush()") Signed-off-by: Bharath Reddy <kbreddy.rpbc@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhang Cen [Fri, 29 May 2026 03:22:09 +0000 (11:22 +0800)]
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen <rollkingzzc@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer.
Fixes: 5725bc608252 ("Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Assisted-by: Codex:GPT-5.4 Signed-off-by: Yuqi Xu <xuyq21@lenovo.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag.
SeungJu Cheon [Mon, 25 May 2026 11:04:43 +0000 (20:04 +0900)]
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhang Cen [Thu, 28 May 2026 09:45:06 +0000 (17:45 +0800)]
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1].
Fixes: 2bb36870e8cb ("Bluetooth: Unify advertising instance flags check") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Zhang Cen <rollkingzzc@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhang Cen [Thu, 28 May 2026 07:56:41 +0000 (15:56 +0800)]
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhang Cen <rollkingzzc@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2dc ("Bluetooth: When HCI work queue is drained, only queue chained work") Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Wed, 27 May 2026 04:59:18 +0000 (04:59 +0000)]
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390d60a2f9a75ef496d2564abb478f46a ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Wed, 27 May 2026 04:59:17 +0000 (04:59 +0000)]
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390d60a2f9a75ef496d2564abb478f46a ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhenghang Xiao [Tue, 26 May 2026 10:51:52 +0000 (18:51 +0800)]
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shuai Zhang [Mon, 25 May 2026 06:51:56 +0000 (14:51 +0800)]
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
When bt_en is pulled high by hardware, the host does not re-download
the firmware after SSR. The controller loads the rampatch and NVM
internally.
On HMT chip, the rampatch is ~264 KB and the NVM is ~9.4 KB. The
loading process takes approximately 70 ms. The previous 50 ms delay is
too short, causing the controller to not respond to the reset command
sent by the host, which leads to BT initialization failure:
Bluetooth: hci0: QCA memdump Done, received 458752, total 458752
Bluetooth: hci0: mem_dump_status: 2
Bluetooth: hci0: Opcode 0x0c03 failed: -110
Increase the delay to 100 ms, which was confirmed as a safe value by
the controller, to ensure the controller has finished loading the
firmware before the host sends commands.
Steps to reproduce:
1. Trigger SSR and wait for SSR to complete:
hcitool cmd 0x3f 0c 26
2. Run "bluetoothctl power on" and observe that BT fails to start.
Fixes: fce1a9244a0f ("Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Doruk Tan Ozturk [Mon, 25 May 2026 16:24:38 +0000 (18:24 +0200)]
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs).
Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Cc: stable@vger.kernel.org Reported-by: Doruk Tan Ozturk <doruk@0sec.ai> Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhao Dongdong [Tue, 26 May 2026 03:21:39 +0000 (11:21 +0800)]
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails.
Fixes: 18722c247023 ("Bluetooth: Enable 6LoWPAN support for BT LE devices") Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shuai Zhang [Thu, 21 May 2026 05:25:47 +0000 (13:25 +0800)]
Bluetooth: btusb: Allow firmware re-download when version matches
The Bluetooth host decides whether to download firmware by reading the
controller firmware download completion flag and firmware version
information.
If a USB error occurs during the firmware download process (for example
due to a USB disconnect), the download is aborted immediately. An
incomplete firmware transfer does not cause the controller to set the
download completion flag, but the firmware version information may be
updated at an early stage of the download process.
In this case, after USB reconnection, the host attempts to re-download
the firmware because the download completion flag is not set. However,
since the controller reports the same firmware version as the target
firmware, the download is skipped. This ultimately results in the
firmware not being properly updated on the controller.
This change removes the restriction that skips firmware download when
the versions are equal. It covers scenarios where the USB connection
can be disconnected at any time and ensures that firmware download can
be retriggered after USB reconnection, allowing the Bluetooth firmware
to be correctly and completely updated.
Fixes: 3267c884cefa ("Bluetooth: btusb: Add support for QCA ROME chipset family") Cc: stable@vger.kernel.org Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Wed, 20 May 2026 22:56:43 +0000 (18:56 -0400)]
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Siwei Zhang [Thu, 21 May 2026 02:12:20 +0000 (22:12 -0400)]
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared.
Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list") Cc: <stable@vger.kernel.org> # 0b58004: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() Signed-off-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Siwei Zhang [Thu, 21 May 2026 02:30:36 +0000 (22:30 -0400)]
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return.
Fixes: adf0398cee86 ("Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout") Cc: stable@vger.kernel.org Signed-off-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pavitra Jha [Thu, 21 May 2026 08:04:14 +0000 (04:04 -0400)]
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but
returns 0 without freeing it when neither pa_sync_term nor big_sync_term
flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was
refactored to take struct hci_conn instead of raw u8 parameters, adding
PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue
failure does not cover this path.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections") Cc: stable@vger.kernel.org Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Safa KarakuÅŸ [Sat, 16 May 2026 18:15:04 +0000 (21:15 +0300)]
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang <oss@fourdim.xyz> Reviewed-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Safa KarakuÅŸ <safa.karakus@secunnix.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mingyu Wang [Mon, 18 May 2026 02:49:49 +0000 (10:49 +0800)]
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities.
Fixes: 3b799254cf6f ("Bluetooth: hci_uart: Cancel init work before unregistering") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jiajia Liu [Mon, 18 May 2026 02:24:02 +0000 (10:24 +0800)]
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths.
Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
David Carlier [Fri, 15 May 2026 06:25:25 +0000 (07:25 +0100)]
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Thu, 14 May 2026 19:02:48 +0000 (00:32 +0530)]
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
btintel_pcie_get_mac_access() and btintel_pcie_release_mac_access()
were programming STOP_MAC_ACCESS_DIS and XTAL_CLK_REQ in addition to
the MAC_ACCESS_REQ handshake. These bits are not part of the host
MAC-access handshake on the supported parts; the driver was
programming them incorrectly. Drop the writes so the register update
contains only the bits the controller actually consumes.
Fixes: b9465e6670a2 ("Bluetooth: btintel_pcie: Read hardware exception data") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
when extended features bit is set otherwise the controller may not
generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing
hci_le_read_all_remote_features_sync to timeout waiting for it.
Also remove dead code.
Fixes: a106e50be74b ("Bluetooth: HCI: Add support for LL Extended Feature Set") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jann Horn [Tue, 12 May 2026 20:15:39 +0000 (22:15 +0200)]
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shuai Zhang [Mon, 11 May 2026 13:58:37 +0000 (21:58 +0800)]
Bluetooth: hci_qca: Convert timeout from jiffies to ms
Since the timer uses jiffies as its unit rather than ms, the timeout value
must be converted from ms to jiffies when configuring the timer. Otherwise,
the intended 8s timeout is incorrectly set to approximately 33s.
To improve readability, embed msecs_to_jiffies() directly in the macro
definitions and drop the _MS suffix from macros that now yield jiffies
values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT,
CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT.
IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are
intentionally left unchanged. Their values are stored in the struct fields
wake_retrans and tx_idle_delay, which hold ms values at runtime and can be
modified via debugfs. The msecs_to_jiffies() conversion happens at each
call site against the field value, so it cannot be embedded in the macro.
Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid).
Cc: stable@vger.kernel.org Fixes: 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Fri, 24 Apr 2026 19:24:29 +0000 (22:24 +0300)]
Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
MT7925 (USB ID 0e8d:e025) on fw version 20260106153314 sends WMT
FUNC_CTRL events that are missing the status field.
Prior to commit 006b9943b982 ("Bluetooth: btmtk: validate WMT event SKB
length before struct access") the status was read from out-of-bounds of
SKB data, which usually would result to success with
BTMTK_WMT_ON_UNDONE, although I don't know the intent here. The bounds
check added in that commit returns with error instead, producing
"Bluetooth: hci0: Failed to send wmt func ctrl (-22)" and makes the
device unusable.
Fix the regression by interpreting too short packet as status
BTMTK_WMT_ON_UNDONE, which makes the device work normally again.
Fixes: 634a4408c061 ("Bluetooth: btmtk: validate WMT event SKB length before struct access") Signed-off-by: Pauli Virtanen <pav@iki.fi> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> # MT7922 (0489:e0e2) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jiexun Wang [Wed, 6 May 2026 11:43:30 +0000 (19:43 +0800)]
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Jann Horn <jannh@google.com> Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sven Schuchmann [Tue, 12 May 2026 07:19:47 +0000 (09:19 +0200)]
net: phy: DP83TC811: add reading of abilities
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Mon, 11 May 2026 17:49:18 +0000 (10:49 -0700)]
net: tls: prevent chain-after-chain in plain text SG
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective.
Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Mon, 11 May 2026 17:49:17 +0000 (10:49 -0700)]
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina).
Reported-by: é’±ä¸€é“ <yimingqian591@gmail.com> Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiang Mei [Mon, 11 May 2026 06:21:38 +0000 (23:21 -0700)]
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match.
Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Reported-by: Weiming Shi <bestswngs@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Xiang Mei <xmei5@asu.edu> Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
macsec: use rcu_work to fix crypto cleanup in softirq context
From: Jinliang Zheng <alexjlzheng@tencent.com>
crypto_free_aead() can internally call vunmap() (e.g. via dma_free_attrs()
in hardware crypto drivers like hisi_sec2), which must not be invoked from
softirq context. Both free_rxsa() and free_txsa() are RCU callbacks that
run in softirq, causing a kernel crash on affected hardware.
This series fixes the issue by deferring the actual cleanup to a workqueue
using rcu_work, which combines the RCU grace period and workqueue dispatch
into a single primitive.
Two design decisions worth noting:
1. rcu_work instead of schedule_work() + synchronize_rcu()
An alternative would be to call schedule_work() directly from
macsec_rxsa_put()/macsec_txsa_put(), then call synchronize_rcu() at
the start of the work handler to replace the grace period previously
provided by call_rcu(). However, synchronize_rcu() blocks the worker
thread for the duration of a full RCU grace period. Under high SA
churn (e.g. tearing down an interface with many SAs), each SA would
occupy a worker thread while waiting, and multiple concurrent calls
cannot share the same grace period — leading to unnecessary latency
and resource waste.
rcu_work uses call_rcu_hurry() internally, which is fully asynchronous:
the worker thread is only dispatched after the grace period has elapsed,
and multiple concurrent queue_rcu_work() calls naturally batch under the
same grace period via the RCU subsystem's existing coalescing mechanism.
2. Dedicated workqueue instead of system_wq
Using a dedicated workqueue (macsec_wq) allows macsec_exit() to drain
exactly the work items belonging to this module — by calling
destroy_workqueue() after rcu_barrier(). If system_wq were used,
flush_scheduled_work() would drain all pending work items across the
entire system, creating unnecessary coupling with unrelated subsystems
and potentially causing unexpected delays. The dedicated workqueue
provides a clean, contained teardown path.
====================
Jinliang Zheng [Mon, 11 May 2026 15:31:00 +0000 (23:31 +0800)]
macsec: use rcu_work to defer TX SA crypto cleanup out of softirq
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Jinliang Zheng [Mon, 11 May 2026 15:30:59 +0000 (23:30 +0800)]
macsec: use rcu_work to defer RX SA crypto cleanup out of softirq
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Jinliang Zheng [Mon, 11 May 2026 15:30:58 +0000 (23:30 +0800)]
macsec: introduce dedicated workqueue for SA crypto cleanup
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Faicker Mo [Mon, 11 May 2026 14:05:51 +0000 (22:05 +0800)]
net: net_failover: Fix the deadlock in slave register
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP") Signed-off-by: Faicker Mo <faicker.mo@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Mon, 11 May 2026 18:30:58 +0000 (14:30 -0400)]
selftests/tc-testing: Add QFQ/CBS qlen underflow test
Since CBS was not calling reset for its child qdisc, there are scenarios
where it could cause an underflow on its parent's qlen/backlog. When the
parent is QFQ, a null-ptr deref could occur.
Add a test case that reproduces the underflow followed by a null-ptr
deref scenario.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jamal Hadi Salim [Mon, 11 May 2026 18:30:57 +0000 (14:30 -0400)]
net/sched: sch_cbs: Call qdisc_reset for child qdisc
During a reset, CBS is not calling reset on its child qdisc, which
might cause qlen/backlog accounting issues. For example, if we have CBS
with a QFQ parent and a netem child with delay, we can create a scenario
where the parent's qlen underflows. QFQ, specifically, uses qlen to
check whether it should deference a pointer, so this scenario may cause
a null-ptr deref in QFQ:
Fix this by calling qdisc_reset for CBS' child qdisc.
Sashiko caught an issue which could result in a null ptr deref if
qdisc_create_dflt() is invoked on an unitialised cbs qdisc which is exposed
by this patch. We add an early return if the qdisc is null to address this.
This is a similar approach used by two other fixes[1][2].
The proper fix for this specific issue elucidated by sashiko is to remove
the call to qdisc_reset when qdisc_create_dflt fails. Since the dflt qdisc
isn't attached anywhere yet at that point, calling the reset callback doesn't
make much sense (and as stated has been a source of two other bugs).
We plan on submitting this fix in a later patch.
[1] https://lore.kernel.org/netdev/20221018063201.306474-2-shaozhengchao@huawei.com/
[2] https://lore.kernel.org/netdev/20221018063201.306474-4-shaozhengchao@huawei.com/
Fixes: 585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc") Reported-by: Junyoung Jang <graypanda.inzag@gmail.com> Tested-by: Junyoung Jang <graypanda.inzag@gmail.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffbee
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9834 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ethernet: ravb: Do not check URAM suspension when WoL is active
When updating the driver to match latest datasheet to suspend access to
URAM when suspending DMA transfers a corner-case was missed, URAM access
will not be suspended if WoL is enabled. This lead to the error message
(correctly) being triggered as URAM access is not suspended even tho
it's requested as part of stopping DMA.
Avoid checking if URAM access is suspended and printing the error
message if WoL is enabled when we suspend the system, as we know it will
not be.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/all/CAMuHMdWnjV%3DHGE1o08zLhUfTgOSene5fYx1J5GG10mB%2BToq8qg@mail.gmail.com/ Fixes: 353d8e7989b6 ("net: ethernet: ravb: Suspend and resume the transmission flow") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chenguang Zhao [Mon, 11 May 2026 01:43:43 +0000 (09:43 +0800)]
ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Xiang Mei [Sun, 10 May 2026 22:26:40 +0000 (15:26 -0700)]
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL.
Fixes: aff3083f10bf ("net/smc: Introduce tracepoints for tx and rx msg") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolò Coccia [Sun, 10 May 2026 16:34:13 +0000 (12:34 -0400)]
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue.
Fixes: a6a6fe27bab4 ("net/smc: Dynamic control handshake limitation by socket options") Signed-off-by: Nicolò Coccia <n.coccia96@gmail.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Tested-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Yang [Sat, 9 May 2026 12:23:58 +0000 (20:23 +0800)]
net: atm: fix skb leak in sigd_send() default branch
The default branch in sigd_send() calls sock_put() and returns -EINVAL
without freeing the skb, while all other exit paths do so. Add the
missing dev_kfree_skb() before sock_put() to fix the leak.
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92b9 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump") Cc: stable@vger.kernel.org # 6.13.x Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zoran Ilievski [Mon, 11 May 2026 06:40:02 +0000 (08:40 +0200)]
net: atlantic: preserve PCI wake-from-D3 on shutdown when WOL enabled
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Paolo Abeni [Tue, 12 May 2026 14:15:03 +0000 (16:15 +0200)]
Merge branch 'net-shaper-fix-various-minor-bugs'
Jakub Kicinski says:
====================
net: shaper: fix various minor bugs
Fix various minor bugs in the net shaper API.
First 2 patches deal with ordering issues around inserting
and publishing new shapers. Shapers are inserted "tentatively"
and marked valid only after HW op succeeded, this used to
be slightly racy.
Only other patch of note is patch 8. We want to add a Netlink
policy check on the handle ID. This necessitates patch 7.
Jakub Kicinski [Sun, 10 May 2026 19:29:04 +0000 (12:29 -0700)]
net: shaper: reject QUEUE scope handle with missing id
net_shaper_parse_handle() does not enforce that the user provides
the handle ID. For NODE the ID defaults to UNSPEC for all other
cases it defaults to 0.
For NETDEV 0 is the only option. For QUEUE defaulting to 0 makes
less intuitive sense. Specifically because the behavior should
(IMHO) be the same for all cases where there may be more than
one ID (QUEUE and NODE).
We should either document this as intentional or reject.
I picked the latter with no strong conviction.
Jakub Kicinski [Sun, 10 May 2026 19:29:03 +0000 (12:29 -0700)]
net: shaper: enforce singleton NETDEV scope with id 0
The NETDEV scope represents a singleton root shaper in the per-device
hierarchy. All code assumes NETDEV shapers have id 0:
net_shaper_default_parent() hardcodes parent->id = 0 when returning
the NETDEV parent for QUEUE/NODE children, and the UAPI documentation
describes NETDEV scope as "the main shaper" (singular, not plural).
net_shaper_parse_handle() reads the user-supplied handle ID via
nla_get_u32(), accepting the full u32 range. However, the xarray key
is built by net_shaper_handle_to_index() using
FIELD_PREP(NET_SHAPER_ID_MASK, handle->id), where NET_SHAPER_ID_MASK
is GENMASK(25, 0) - only 26 bits wide. FIELD_PREP silently masks off
the upper bits at runtime. A user-supplied NODE id like 0x04000123
becomes id 0x123.
Additionally, a user-supplied id equal to NET_SHAPER_ID_UNSPEC
(0x03FFFFFF, which is NET_SHAPER_ID_MASK itself) would collide with
the sentinel used internally by the group operation to signal
"allocate a new NODE id".
Reject user-supplied IDs >= NET_SHAPER_ID_MASK (i.e., >= 0x03FFFFFF)
in the policy.
Jakub Kicinski [Sun, 10 May 2026 19:29:01 +0000 (12:29 -0700)]
tools: ynl: add scope qualifier for definitions
Using definitions in kernel policies is awkward right now.
On one hand we want defines for max values and such.
On the other we don't have a way of adding kernel-only defines.
Adding unnecessary defines to uAPI is a bad idea, we won't
be able to delete them. And when it comes to policy user
space should just query it via the policy dump, not use
hard coded defines.
Add a "scope" property to definitions, which will let us tell
the codegen that a definition is for kernel use only. Support
following values:
- uapi: render into the uAPI header (default, today's behavior)
- kernel: render to kernel header only
- user: same as kernel but for the user-side generated header
Definitions may have a header property (definition is "external",
provided by existing header). Extend the scope to headers, too.
If definition has both scope and header properties we will only
generate the includes in the right scope.
Jakub Kicinski [Sun, 10 May 2026 19:29:00 +0000 (12:29 -0700)]
net: shaper: fix undersized reply skb allocation in GROUP command
net_shaper_group_send_reply() writes both the NET_SHAPER_A_IFINDEX
attribute (via net_shaper_fill_binding()) and the nested
NET_SHAPER_A_HANDLE attribute (via net_shaper_fill_handle()), but
the reply skb at the call site in net_shaper_nl_group_doit() is
allocated using net_shaper_handle_size(), which only accounts for
the nested handle.
The allocation is therefore short by nla_total_size(sizeof(u32))
(8 bytes) for the IFINDEX attribute. In practice the slab allocator
rounds up the small allocation so the bug is latent, but the size
accounting is wrong and could bite if the reply grew further.
Introduce net_shaper_group_reply_size() that accounts for the full
reply payload and use it both at the genlmsg_new() call site and in
the defensive WARN_ONCE message.
Jakub Kicinski [Sun, 10 May 2026 19:28:57 +0000 (12:28 -0700)]
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret.
Jakub Kicinski [Sun, 10 May 2026 19:28:55 +0000 (12:28 -0700)]
net: shaper: flip the polarity of the valid flag
The usual way of inserting entries which are not yet fully ready
into XArray is to have a VALID flag. The shaper code has a NOT_VALID
flag. Since XArray code does not let us create entries with marks
already set - the creation of entries is currently not atomic.
Flip the polarity of the VALID flag. This closes the tiny race
in net_shaper_pre_insert() of entries being created without
the NOT_VALID flag.
net: ethernet: cs89x0: remove stale CONFIG_MACH_MX31ADS reference
The legacy ARM board file for MACH_MX31ADS was removed in commit c93197b0041d ("ARM: imx: Remove i.MX31 board files"), but a reference
to it remained in the cs89x0 driver. Drop this unused code.
Linus Walleij [Fri, 8 May 2026 22:13:38 +0000 (00:13 +0200)]
net: ethernet: cortina: Carry over frag counter
The gmac_rx() NAPI poll function assembles packets in an
SKB from a ring buffer.
If the ring buffer gets completely emptied during a poll cycle,
we exit gmac_rx(), but the packet is not yet completely
assembled in the SKB, yet the fragment counter frag_nr is
reset to zero on the next invocation.
Solve this by making the RX fragment counter a part of the
port struct, and carry it over between invocations.
Reset the fragment counter only right after calling
napi_gro_frags(), on error (after calling napi_free_frags())
or if stopping the port.
Reset it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
Linus Walleij [Fri, 8 May 2026 22:13:37 +0000 (00:13 +0200)]
net: ethernet: cortina: Make RX SKB per-port
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
====================
vsock/virtio: fix vsockmon tap skb construction
While reviewing the patch posted by Yiqi Sun [1] to fix an issue in
virtio_transport_build_skb(), I discovered another issue related to
the offset and length of the payload to be copied in the new skb.
This was introduced when we did the skb conversion, and fixed by
patch 1.
Patch 2 fixes the issue found by Yiqi Sun in a different way: using
iov_iter_kvec() to properly initialize all the iov_iter fields and
removing the linear vs non-linear split like we alredy do in
vhost-vsock.
It could have been a single patch, but since there were two affected
commits, I decided to keep the fixes separate.
vsock/virtio: fix empty payload in tap skb for non-linear buffers
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail.
Fixes: 4b0bf10eb077 ("vsock/virtio: non-linear skb handling for tap") Reported-by: Yiqi Sun <sunyiqixm@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org> Link: https://patch.msgid.link/20260508164411.261440-3-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vsock/virtio: fix length and offset in tap skb for split packets
virtio_transport_build_skb() builds a new skb to be delivered to the
vsockmon tap device. To build the new skb, it uses the original skb
data length as payload length, but as the comment notes, the original
packet stored in the skb may have been split in multiple packets, so we
need to use the length in the header, which is correctly updated before
the packet is delivered to the tap, and the offset for the data.
This was also similar to what we did before commit 71dc9ec9ac7d
("virtio/vsock: replace virtio_vsock_pkt with sk_buff") where we probably
missed something during the skb conversion.
Also update the comment above, which was left stale by the skb
conversion and still mentioned a buffer pointer that no longer exists.
Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org> Link: https://patch.msgid.link/20260508164411.261440-2-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Quan Sun [Fri, 8 May 2026 12:46:36 +0000 (20:46 +0800)]
net: hsr: fix NULL pointer dereference in hsr_get_node_data()
In the HSR (High-availability Seamless Redundancy) protocol, node
information is maintained in the node_db. When a supervision frame is
received, node->addr_B_port is updated to track the receiving port type
(e.g., HSR_PT_SLAVE_B).
If the underlying physical interface associated with this slave port is
removed (e.g., via `ip link del`), hsr_del_port() frees the hsr_port
object. However, the stale node->addr_B_port reference is kept in the
node_db until the node ages out.
Subsequently, if userspace queries the node status via the Netlink
command HSR_C_GET_NODE_STATUS, the kernel calls hsr_get_node_data().
This function unconditionally dereferences the pointer returned by
hsr_port_get_hsr():
if (node->addr_B_port != HSR_PT_NONE) {
port = hsr_port_get_hsr(hsr, node->addr_B_port);
*addr_b_ifindex = port->dev->ifindex; // <-- NULL deref
}
If the slave port has been deleted, hsr_port_get_hsr() returns NULL,
resulting in a kernel panic.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:hsr_get_node_data+0x7b6/0x9e0
Call Trace:
<TASK>
hsr_get_node_status+0x445/0xa40
Fix this by adding a proper NULL pointer check. If the port lookup fails
due to a stale port type, gracefully treat it as if no valid port exists
and assign -1 to the interface index.
Steps to reproduce:
1. Create an HSR interface with two slave devices.
2. Receive a supervision frame to populate node_db with
addr_B_port assigned to SLAVE_B.
3. Delete the underlying slave device B.
4. Send an HSR_C_GET_NODE_STATUS Netlink message.
qed: fix division by zero in qed_init_wfq_param when all vports are configured
In qed_init_wfq_param(), variable non_requested_count can become zero
when the number of vports with the configured flag set (including the
current vport being configured) equals total num_vports. This happens
when configuring the last unconfigured vport or when re-configuring
an already configured vport.
The function then calculates left_rate_per_vp = total_left_rate /
non_requested_count, which causes division by zero.
Fix this by skipping the division when non_requested_count is zero.
In that case, there is no remaining bandwidth to distribute, so just
record the configuration for the current vport and return success.
Davide Caratti [Fri, 8 May 2026 17:05:10 +0000 (19:05 +0200)]
net/sched: dualpi2: initialize timer earlier in dualpi2_init()
'pi2_timer' needs to be initialized in all error paths of dualpi2_init():
otherwise, a failure in qdisc_create_dflt() causes the following crash in
dualpi2_destroy():
net: ena: PHC: Check return code before setting timestamp output
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/rds: reset op_nents when zerocopy page pin fails
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
net: xgene: fix mdio_np leak in xgene_mdiobus_register()
The for_each_child_of_node() loop captures mdio_np via break,
holding the refcount. of_mdiobus_register() does not consume the
reference, so it leaks on success.
Jakub Kicinski [Sun, 10 May 2026 17:07:37 +0000 (10:07 -0700)]
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tools/ynl: add missing uapi header deps in Makefile.deps
ethtool.h includes linux/typelimits.h which is a relatively new header
not yet shipped in most distro kernel-header packages. Without the
explicit entry, the build silently falls through to -idirafter.
dev_energymodel.h is a new YNL family whose uapi header is not in
system paths at all and was missing a CFLAGS entry entirely.
Holger Brunck [Thu, 7 May 2026 15:53:32 +0000 (17:53 +0200)]
net: wan: fsl_ucc_hdlc: free tx_skbuff in uhdlc_memclean
When the device is removed all allocated resources should be freed.
In uhdlc_memclean the netdev transmit queue was already stopped. But at
this point we may have pending skb in the transmit queue which must be
freed. Therefore iterate over the tx_skbuff pointers and free all
pending skb. The issue was discovered by sashiko.
Tested on a ls1043a board running HDLC in bus mode on kernel 6.12.
Jakub Kicinski [Sat, 9 May 2026 01:28:26 +0000 (18:28 -0700)]
Merge tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Allow initial x_tables table replacement without emitting an audit
log message. Delay the register message until after hooks are wired up
to avoid unnecessary unregister logs during error unwinding.
2) Fix a NULL dereference by allocating hook ops before adding the
table to the per-netns list. Use `synchronize_rcu()` during error
unwinding to ensure the table stops processing packets before
teardown. Defer audit log register message until all operations
succeed.
3) Refactor xtables to use a single `xt_unregister_table_pre_exit`
function. Eliminate code duplication by centralizing table
unregistration logic within the xtables core. ebtables cannot be
changed due to incompatibility.
4) Unregister xtables templates before module removal. This prevents
a race condition where userspace instantiates a new table after the
pernet unreg removed the current table.
5) Add `xtables_unregister_table_exit` to fully unregister netfilter
tables during module removal. Unlink the table from dying lists,
then free hook operations.
6) Implement a two-stage removal scheme for ebtables following the
x_tables pattern. Assign table->ops while holding the ebt mutex to
prevent exposing partially-filled structures.
7) Fix ebtables module initialization race. Register the template last
in table initialization functions. Prevent table instantiation before
pernet operations are available.
8) Fix a race condition in x_tables module initialization. Ensure
pernet ops are fully set up before exposing the table to userspace.
9) Fix a race condition in ebtables module initialization, similar to
previous patch.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Validate that the expectation tuple and mask netlink attributes are
present when adding expectation via nfqueue, this fixes a possible
null-ptr-deref.
12) Fix possible rare memleak in the SIP helper in case helper has been
detached from conntrack entry, from Li Xiasong.
13) Fix refcount leak in nft_ct when creating custom expectation, also
from Li Xiason.
Patches 1-9 from Florian Westphal.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Check that tuple and mask netlink attributes are set when creating an
expectation via nfqueue.
* tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: fix missing expect put in obj eval
netfilter: nf_conntrack_sip: get helper before allocating expectation
netfilter: ctnetlink: check tuple and mask in expectations created via nfqueue
netfilter: nf_conntrack_expect: restore helper propagation via expectation
netfilter: bridge: eb_tables: close module init race
netfilter: x_tables: close dangling table module init race
netfilter: ebtables: close dangling table module init race
netfilter: ebtables: move to two-stage removal scheme
netfilter: x_tables: add and use xtables_unregister_table_exit
netfilter: x_tables: unregister the templates first
netfilter: x_tables: add and use xt_unregister_table_pre_exit
netfilter: x_tables: allocate hook ops while under mutex
netfilter: x_tables: allow initial table replace without emitting audit log message
====================
Ben Morris [Fri, 8 May 2026 00:14:55 +0000 (17:14 -0700)]
sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb027307 ("sctp: walk the list of asoc
safely") was added for.
Fixes: 4910280503f3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg") Cc: stable@vger.kernel.org Signed-off-by: Ben Morris <bmorris@anthropic.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20260508001455.3137-1-joycathacker@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ti: icssm-prueth: fix eth_ports_node leak in probe
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Myeonghun Pak [Wed, 6 May 2026 12:43:11 +0000 (21:43 +0900)]
net: lan966x: avoid unregistering netdev on register failure
lan966x_probe_port() stores the newly allocated net_device in the
port before calling register_netdev(). If register_netdev() fails,
the probe error path calls lan966x_cleanup_ports(), which sees
port->dev and calls unregister_netdev() for a device that was never
registered.
Destroy the phylink instance created for this port and clear port->dev
before returning the registration error. The common cleanup path now skips
ports without port->dev before reaching the registered netdev cleanup, so
it only handles ports that reached the registered-netdev lifetime.
This also avoids treating an uninitialized FDMA netdev and the failed port
as a NULL == NULL match in the common cleanup path.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Link: https://patch.msgid.link/20260506124331.31945-1-mhun512@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Intel Wired LAN Driver Updates 2026-05-04 (i40e, ice, idpf)
Matt Volrath fixes two issues with the i40e driver probe routine, ensuring
that PTP is properly cleaned up if the probe fails.
Emil corrects the initialization of the read_dev_clk_lock spinlock in
idpf_ptp_init, ensuring it is initialized prior to when the
ptp_schedule_worker() is called.
Greg KH fixes a double free and use-after free in the idpf auxiliary device
error paths.
Marcin fixes ice_set_rss_hfunc() to use the correct q_opt_flags field,
correcting the assignment and preventing submission of invalid data to the
firmware.
Bart corrects the locking in ice_dcb_rebuild(), ensuring that the tc_mutex
is held over the entire operation.
Ivan fixes the rclk pin state get for E810 devices, ensuring the index is
properly offset by the base_rclk_idx value. This ensures that the correct
pin index is used to look up recovered clock state. He additionally adds
bounds checking to prevent attempting to access pins outside of the pin
state array.
Ivan also moves the CGU register macros to the top of ice_dpll.h, inside
the header guard to avoid duplicate macro definitions should the ice_dpll.h
header is included multiple times.
====================
Ivan Vecera [Wed, 6 May 2026 21:48:17 +0000 (14:48 -0700)]
ice: dpll: fix misplaced header macros
The CGU register definitions (ICE_CGU_R10, ICE_CGU_R11 and related field
masks) were placed after the #endif of the _ICE_DPLL_H_ include guard,
leaving them unprotected. Move them inside the guard.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-8-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Wed, 6 May 2026 21:48:16 +0000 (14:48 -0700)]
ice: dpll: fix rclk pin state get for E810
The refactoring of ice_dpll_rclk_state_on_pin_get() to use
ice_dpll_pin_get_parent_idx() omitted the base_rclk_idx adjustment that was
correctly added in the ice_dpll_rclk_state_on_pin_set() path. This breaks
E810 devices where base_rclk_idx is non-zero, causing the wrong hardware
index to be used for pin state lookup and incorrect recovered clock state
to be reported via the DPLL subsystem. E825C is unaffected as its
base_rclk_idx is 0.
While at it, add bounds check against ICE_DPLL_RCLK_NUM_MAX on hw_idx after
the base_rclk_idx subtraction in both ice_dpll_rclk_state_on_pin_{get,set}()
to prevent out-of-bounds access on the pin state array.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-7-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bart Van Assche [Wed, 6 May 2026 21:48:15 +0000 (14:48 -0700)]
ice: fix locking in ice_dcb_rebuild()
Move the mutex_lock() call up to prevent that DCB settings change after
the first ice_query_port_ets() call. The second ice_query_port_ets()
call in ice_dcb_rebuild() is already protected by pf->tc_mutex.
This also fixes a bug in an error path, as before taking the first
"goto dcb_error" in the function jumped over mutex_lock() to
mutex_unlock().
This bug has been detected by the clang thread-safety analyzer.
Cc: intel-wired-lan@lists.osuosl.org Fixes: 242b5e068b25 ("ice: Fix DCB rebuild after reset") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Wed, 6 May 2026 21:48:14 +0000 (14:48 -0700)]
ice: fix setting RSS VSI hash for E830
ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
function, leaving other VSI options unchanged. However, ::q_opt_flags is
mistakenly set to the value of another field, instead of its original
value, probably due to a typo. What happens next is hardware-dependent:
On E810, only the first bit is meaningful (see
ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
state than before VSI update.
On E830, some of the remaining bits are not reserved. Setting them
to some unrelated values can cause the firmware to reject the update
because of invalid settings, or worse - succeed.
Reproducer:
sudo ethtool -X $PF1 equal 8
Output in dmesg:
Failed to configure RSS hash for VSI 6, error -5
Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-5-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf: fix double free and use-after-free in aux device error paths
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable@kernel.org Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy") Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-4-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emil Tantilov [Wed, 6 May 2026 21:48:12 +0000 (14:48 -0700)]
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d2366 ("idpf: negotiate PTP capabilities and get PTP clock") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matt Vollrath [Wed, 6 May 2026 21:48:10 +0000 (14:48 -0700)]
i40e: Cleanup PTP registration on probe failure
Fix two conditions which would leak PTP registration on probe failure:
1. i40e_setup_pf_switch can encounter an error in
i40e_setup_pf_filter_control, call i40e_ptp_init, then return
non-zero, sending i40e_probe to err_vsis.
2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to
err_vsis.
Both of these conditions have been present since PTP was introduced in
this driver.
Found with coccinelle.
Fixes: beb0dff1251db ("i40e: enable PTP") Signed-off-by: Matt Vollrath <tactii@gmail.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir [Wed, 6 May 2026 23:37:45 +0000 (16:37 -0700)]
net: shaper: Reject reparenting of existing nodes
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
projects / thirdparty / kernel / linux.git / log
