build: don't use recursive make to build the 'doc' subdirectory
* doc/Makefile.am: Rename ...
* doc/local.mk: ... like this. With further adjustments ...
(info_TEXINFOS): Prepend 'doc/' to all '*.texi' files listed in
here.
(coreutils_TEXINFOS): Likewise, and rename ...
(doc_coreutils_TEXINFOS): ... like this.
(constants.texi): Rename ...
(doc/constants.texi): ... like this. Adjust the recipe to avoid
spurious errors.
(MAINTAINERCLEANFILES): Adjust, and extend with '+=' rather than
setting it with '='.
(ME): Delete.
(find_upper_case_var): Use '$@', not '$(ME)', in error messages.
* Makefile.am: Include 'doc/local.mk'.
(SUBDIRS): Remove 'doc'.
* configure.ac (AC_CONFIG_FILES): Remove 'doc/Makefile'.
build: use 'check-local' to extend the 'check' target
* doc/Makefile.am (check-local): Here, by making this depend
on 'check-texinfo' ...
(check): ... rather than this. While the old usage worked, it
did so for an implementation detail rather than a documented
behaviour, so relying on that was riskier a "unclean".
build: prefer '$(top_srcdir)/doc' over '$(srcdir)' in doc Makefile
This is just a preparatory refactoring that will become useful in
a future change (in which the doc/Makefile.am makefile will be merged
with the top-level one).
* doc/Makefile.am (doc_srcdir): New, define to '$(top_srcdir)/doc'.
Use it throughout instead of "bare" '$(srcdir)'.
build: add extra *.texi files to coreutils_TEXINFOS, not EXTRA_DIST
* doc/Makefile.am (coreutils_TEXINFO): List them here, instead of ...
(EXTRA_DIST): ... listing them here. This ensures the rebuild rules
will be more faithful.
($(DVIS), $(INFO_DEPS)): No need to depend on $(EXTRA_DIST) now.
Jim Meyering [Wed, 29 Aug 2012 07:32:49 +0000 (09:32 +0200)]
tail,stat: improve support for ZFS
This change enables tail -f to use inotify and lets
stat -f --format=%T report the file system type name, "zfs".
* src/stat.c (human_fstype): Add a case: zfs, 0x2fc12fc1.
* NEWS (Improvements): Mention it.
* THANKS.in: Update.
Reported by Raimonds Miltins in http://bugs.gnu.org/12301.
Jim Meyering [Sun, 26 Aug 2012 11:28:34 +0000 (13:28 +0200)]
maint: stop using @acronym{...} in texinfo sources
* doc/coreutils.texi: Remove all uses of @acronym{...},
per recommendation by Karl Berry.
* doc/perm.texi: Likewise.
* cfg.mk (local-checks-to-skip): Remove exemption, enabling
the @acronym{-prohibiting syntax-check rule.
* NEWS: Add new feature info.
* doc/coreutils.texi (md5sum invocation): Add detailed information
about the new --tag option.
* src/md5sum.c: Add the new --tag option for BSD-style output.
(bsd_split_3): Add ESCAPED_FILENAME parameter.
(print_filename): New function refactored from main().
(filename_unescape): New function refactored from split_3().
* tests/misc/md5sum-bsd: Add tests for the new feature.
Rob Day [Wed, 22 Aug 2012 22:04:19 +0000 (23:04 +0100)]
rm: fix the new --dir (-d) option to work with -i
* src/remove.c (prompt): Hoist the computation of is_empty, since we'll
need it slightly earlier.
Before, this function would arrange to fail with EISDIR when processing
a directory without --recursive (-r). Adjust the condition to exempt
an empty directory when --dir has been specified.
Improve comments.
* tests/rm/d-3: New file, to ensure that rm -d -i dir works.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
* THANKS.in: Update.
Reported by Michael Price in http://bugs.gnu.org/12260
Bernhard Voelker [Wed, 22 Aug 2012 13:04:04 +0000 (15:04 +0200)]
tests: correct print_ver_ arguments and add a rule to enforce this
We use print_ver_ to run "PROG --version" for each program under
test. Some tests have been derived from others, while the
argument(s) to print_ver_ have not been adapted.
Add a new cfg.mk rule to prohibit this.
* cfg.mk (sc_prohibit_test_calls_print_ver_with_irrelevant_argument):
New rule, to prohibit a test script from calling print_env_ for a
program not actually used by that test.
* tests/chown/basic: s/\(print_ver_\) chgrp/\1 chown/
* tests/cp/acl: s/\(print_ver_\) mv/\1 cp/
* tests/cp/capability: s/\(print_ver_\) ls/\1 cp/
* tests/cp/cp-parents: s/(print_ver_\) mv/\1 cp/
* tests/du/bind-mount-dir-cycle: s/(print_ver_\) rm/\1 du/
* tests/misc/wc-parallel: s/(print_ver_\) md5sum/\1 wc/
Ondrej Oprala [Thu, 9 Aug 2012 15:34:09 +0000 (17:34 +0200)]
du: handle bind-mounted directory cycles gracefully
Before this change, a directory cycle induced by a bind mount
would be treated as a fatal error, i.e., probable disk corruption.
However, such cycles are relatively common, and can be detected
efficiently, so now du emits a descriptive warning and arranges
to exit nonzero.
* NEWS (Bug fixes): Mention it.
* src/du.c: Include "mountlist.h".
(di_mnt): New global set.
(di_files): Rename global from di_set, now that there are two.
(fill_mount_table): New function.
(hash_ins): Add DI_SET parameter.
(process_file): Look up each dir dev/ino pair in the new set.
(main): Allocate, initialize, and free the new set.
* tests/du/bind-mount-dir-cycle: Add a test for the fix.
* tests/Makefile.am (TESTS): Add it.
* THANKS.in: Update.
This implements the proposal in http://bugs.gnu.org/11844.
Originally reported in http://bugs.debian.org/563254 by Alan Jenkins
and more recently as http://bugzilla.redhat.com/836557
Paul Eggert [Sat, 18 Aug 2012 16:46:39 +0000 (09:46 -0700)]
tests: port df/no-mtab-status to Solaris
* tests/df/no-mtab-status: Include <mntent.h> in test program, so
that the getmntent hack compilation fails on Solaris, as it
should, since it's not compatible with Solaris. Reported by
Stefano Lattarini in <http://bugs.gnu.org/12225>.
Jim Meyering [Sun, 19 Aug 2012 15:34:04 +0000 (17:34 +0200)]
tests: avoid split/filter test failure on very low-mem system
* tests/split/filter: Use xz -1 when compressing, to minimize
memory usage. Otherwise, xz could fail due to insufficient
virtual memory on a system with very little free memory.
Paul Eggert [Fri, 17 Aug 2012 20:26:00 +0000 (13:26 -0700)]
sort: simpler fix for sort -u data-loss bug, and for a FMR bug
This also fixes a free-memory-read (FMR) bug: when fillbuf's realloc
of buf->buf frees the buffer into which saved_line.text points,
the processing of that just-read longer line includes comparison
against the saved line in freed memory.
* src/sort.c (overlap): Remove.
(fillbuf): Do not try to copy saved lines, as that is too risky
in the presence of parallelism, reallocated buffers, etc.
(sort): Invalidate any saved line before sorting a new batch.
Jim Meyering [Wed, 15 Aug 2012 10:30:44 +0000 (12:30 +0200)]
sort: sort --unique (-u) could cause data loss
sort -u could omit one or more lines of expected output.
This bug arose because sort recorded the most recently printed line via
reference, and if you were unlucky, the storage for that line would be
reused (overwritten) as additional input was read into memory. If you
were doubly unlucky, the new value of the "saved" line would not only
match the very next line, but if that next line were also the first in
a series of identical, not-yet-printed lines, then the corrupted "saved"
line value would result in the omission of all matching lines.
* src/sort.c (saved_line): New static/global, renamed and moved from...
(write_unique): ...here. Old name was "saved", which was too generic
for its new role as file-scoped global.
(fillbuf): With --unique, when we're about to read into a buffer that
overlaps the saved "preceding" line (saved_line), copy the line's .text
member to a realloc'd-as-needed temporary buffer and adjust the line's
key-defining members if they're set.
(overlap): New function.
* tests/misc/sort: New tests.
* NEWS (Bug fixes): Mention it.
* THANKS.in: Update.
Bug introduced via commit v8.5-89-g9face83.
Reported by Rasmus Borup Hansen in
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/23173/focus=24647
Jim Meyering [Thu, 16 Aug 2012 06:59:27 +0000 (08:59 +0200)]
tests: reverse args in Coreutils.pm-invoked diff, for consistency
* tests/Coreutils.pm (_compare_files): Reverse diff arguments so
that we invoke diff -c $expected $actual, which is consistent with
how init.sh-using tests invoke "compare exp out".
Krzysztof Goj [Sun, 22 Jan 2012 00:39:59 +0000 (01:39 +0100)]
rm: new option --dir (-d) to remove empty directories
Add new option to rm (-d/--dir), which allows removal of
empty directories, while still safely disallowing removal
of non-empty ones.
This improves compatibility with Mac OS X and BSD systems,
which honor the -d option.
* src/remove.c (rm_fts): Remove empty directories when requested.
* src/remove.h (rm_options) [remove_empty_directories]: New member.
* src/rm.c (long_opts, usage, main): Update usage and option parsing.
(rm_option_init): Initialize the new member.
* src/mv.c (rm_option_init): Initialize the new member.
* tests/rm/d-1: New test case - successfully delete empty dir.
* tests/rm/d-2: New test case - refuse to delete nonempty dir.
* tests/Makefile.am (TESTS): Add them.
Bernhard Voelker [Tue, 14 Aug 2012 07:22:13 +0000 (09:22 +0200)]
df: fail when the mount list is required but cannot be read
* src/df.c (main): Add conditions to fail when the mount list cannot
be read: this includes the cases when a file name argument is given
and any of -a, -l, -t or -x is used.
* doc/coreutils.texi: Document the additional error conditions.
* tests/df/no-mtab-status: Add a new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Pádraig Brady [Wed, 8 Aug 2012 15:38:38 +0000 (16:38 +0100)]
tests: fix validation of local file systems
* tests/init.cfg (require_mount_list_): A new function
to ensure we can read the list of file systems.
(require_local_dir_): Call the above function, as otherwise
the check is invalid.
* tests/df/total-unprocessed: Ensure df can read the
list of mounted file systems so that --local can be honored.
Jim Meyering [Sun, 5 Aug 2012 08:05:13 +0000 (10:05 +0200)]
build: avoid sort link failure on Solaris 10
* src/Makefile.am (sort_LDADD): Sort uses euidaccess, which may require
whatever library configure deemed necessary to resolve the eaccess
function, but no one told sort to link with that library.
(sort_LDADD): Add $(LIB_EACCESS).
When the combination of the file system options with given files or
devices does not lead to output, "df --total" would exit successfully
although it should not.
Examples:
$ df --total --type=xfs / # when / is not an XFS file system
$ df --total --local -t nfs DIR # nfs is remote per se ...
$ df --total -t qwerty /dev/sdb5 # typo in file system type
Furthermore, "df --total" would not print the error message "no file
systems processed" when the file argument does not exist or is otherwise
not accessible.
Example:
$ df --total __not_exist__
These 2 bugs are present since --total was added by commit v6.12-166-gea2887b.
* src/df.c (get_dev): Do not set file_systems_processed to true when
force_fsu is true, i.e. when the row for the "total" line is processed.
(main): Don't print totals unless we've processed a file system.
Also only print the "no FS processed" message if there was no
preceding diagnostic.
* tests/df/total-unprocessed: Add a new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Jim Meyering [Sat, 4 Aug 2012 09:02:40 +0000 (11:02 +0200)]
truncate: don't leak a file descriptor with --ref=PIPE
* src/truncate.c (main): For a user who makes the mistake of
using a non-seekable file as a reference for the desired length,
truncate would open that file, attempt to seek to its end, but
upon seek failure would neglect to close the file descriptor.
Close the file descriptor even when lseek fails.
In addition, ignore failure to close that reference FD, since as
long as the lseek succeeds, a close failure doesn't matter.
Coverity spotted the potential FD leak.
Jim Meyering [Thu, 2 Aug 2012 17:12:18 +0000 (19:12 +0200)]
tests: avoid FP ulimit failure with valgrind-wrapped tools
* tests/init.cfg (require_ulimit_): Raise VM limit from 10MiB to
20MiB, to accommodate overhead of a valgrind-wrapped date program.
Also declare this function's local variables "local".
Jim Meyering [Thu, 2 Aug 2012 17:31:36 +0000 (19:31 +0200)]
split: plug nominal leaks
* src/split.c (lines_rr) [IF_LINT]: Plug a harmless leak.
(main) [IF_LINT]: Free a usually-small (~70KB) buffer
just before exit, mainly to take this off the radar of
leak-detecting tools.
Jim Meyering [Fri, 27 Jul 2012 10:15:32 +0000 (12:15 +0200)]
maint: refresh stale local gnulib patch files
We carry local adjustments for a few gnulib modules via the
patches in gl/. Nearly all of those patches had become stale
due to evolution of the originals in gnulib.
To refresh them, first make sure you have no local changes in gl/
or in the gnulib submodule, then run "make refresh-gnulib-patches".
Jim Meyering [Wed, 25 Jul 2012 16:35:36 +0000 (18:35 +0200)]
tail: avoid misleading diagnostic upon fstat failure
* src/tail.c (check_fspec): Save fstat-induced errno *before*
calling close_fd, not after. Otherwise, the close could well
clobber the global errno, making tail print an invalid diagnostic.
This could happen only with tail -f, and even then, only when
a valid file descriptor were to provoke fstat failure.
Jim Meyering [Fri, 20 Jul 2012 13:10:12 +0000 (15:10 +0200)]
maint: adjust exemption to track renamed test script
* cfg.mk (exclude_file_name_regexp--sc_file_system): Sync this
exemption regexp to match renamed tests/df/df-P. This avoids
a "make syntax-check" failure.
Joachim Schmitz [Fri, 20 Jul 2012 12:32:53 +0000 (14:32 +0200)]
maint: rm: remove unused static-inlined functions
* src/remove.c (cache_statted, is_dir_lstat): Remove unused
static-inlined functions.
* THANKS.in: Remove my name from this list, now that (with this
commit) it is included automatically.
Copyright-paperwork-exempt: Yes
* tests/cp/fiemap-perf: Skip the test on ext2 file systems,
as we do for ext3. Also skip the test if we can't create
a 1TiB file, which might not be supported on certain file systems.
df: don't output control characters in a mount point name
It's awkward to read and problematic for scripts when
control characters like '\n' are output.
Note other fields are already handled with mbsalign,
which converts non printable chars to the replacement char.
A caveat to note with that, is the replacement char takes
a place in the field and so possibly truncates the field
if it was the widest field in the records.
Note a more general replacement function, that
handles all printable, or non white space characters,
would require more sophisticated support for various
encodings, and the complexity vs benefit was not
deemed beneficial enough at present.
Perhaps in future a more general replacement function
could be shared between the various utilities.
Note <space> is unaffected in any field,
which could impact scripts processing the output.
However any of the number fields at least could have
spaces considering `LANG=fr_FR df -B\'1`, so it's
probably best to leave spaces, which also allows
scripts to handle mount points with spaces without change.
* src/df.c (hide_problematic_chars): Replace control chars with '?'.
* tests/df/problematic-chars: Add a new root only test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Jim Meyering [Sun, 15 Jul 2012 16:18:03 +0000 (18:18 +0200)]
pinky,who: fix bug in latest change
* src/system.h (stzncpy): New function.
* src/pinky.c (print_entry): Use stzncpy, not stpncpy.
The latter does not NUL-terminate. I assumed that strncpy was
the only function with such a horrible API. Today I learned that
stpncpy also may not NUL-terminate its result.
The bugs were introduced in commit v8.17-48-gf79263d.
* src/who.c (print_user): Likewise.
Thanks to Erik Auerswald for spotting my error.
Or rather, with the development version 4.13.90, which will eventually
become Texinfo 5.0.
* doc/coreutils.texi: Use '@item' instead of '@itemx' in several places,
as Texinfo 5 refuses to process an '@itemx' that is not preceded by an
'@item'. Ensure that node extended names in menus and sectioning are
consistent, and that ordering and presence of nodes in menus and in the
actual text are consistent as well.
Bernhard Voelker [Wed, 11 Jul 2012 15:27:20 +0000 (17:27 +0200)]
df: warn if soon-to-be-removed --megabyte option is used
* src/df.c (MEGABYTES_OPTION): Add enum and mark it for removal
in August 2013.
(long_options): Use MEGABYTES_OPTION for --megabytes option.
(main): Add a case for it and issue a deprecation warning if
the long form is used. Document the short -m option to
exist only for BSD compatibility.
Paul Eggert [Tue, 10 Jul 2012 23:14:33 +0000 (16:14 -0700)]
sort: by default, do not exceed 3/4 of physical memory
* src/sort.c (default_sort_size): Do not exceed 3/4 of total memory.
See Jeff Janes's bug report in
<http://lists.gnu.org/archive/html/coreutils/2012-06/msg00018.html>.
Paul Eggert [Thu, 5 Jul 2012 23:11:49 +0000 (16:11 -0700)]
doc: document leap seconds better
* doc/coreutils.texi (touch invocation, Time conversion specifiers)
(Options for date, Examples of date): Index "leap seconds" and
improve their documentation a bit.
Jim Meyering [Wed, 4 Jul 2012 11:01:56 +0000 (13:01 +0200)]
date: fails to diagnose invalid input
date -d "$(printf '\xb0')" would print 00:00:00 with today's date
rather than diagnosing the invalid input. Now it reports this:
date: invalid date '\260'
* gnulib: Update submodule to latest for fixed parse-datetime.y.
* tests/misc/date [invalid-high-bit-set]: New test.
* NEWS (Bug fixes): Mention it.
* bootstrap, tests/init.sh: Also update to latest.
Reported by Peter Evans in http://bugs.gnu.org/11843
Jim Meyering [Tue, 3 Jul 2012 18:14:56 +0000 (20:14 +0200)]
maint: add syntax-check rule to help avoid misuse of EXIT_FAILURE
* cfg.mk (sc_some_programs_must_avoid_exit_failure): New rule,
to help us avoid using EXIT_FAILURE in programs like sort, ls, nohup,
timeout, env, etc. that use different exit codes in many cases.
Paul Eggert [Mon, 2 Jul 2012 22:47:03 +0000 (15:47 -0700)]
sort: simplify -o handling to avoid fdopen, assert
* src/sort.c (outfd): Remove. All uses replaced by STDOUT_FILENO.
(stream_open): When writing, use stdout rather than fdopen.
(move_fd_or_die): Renamed from dup2_or_die, with the added functionality
of closing its first argument. All uses changed.
(avoid_trashing_input): Special case for !outfile no longer needed.
(check_output): Arrange for standard output to go to the file,
rather than storing the fd in outfd.
sort: avoid redundant processing with inaccessible inputs or output
* src/sort.c (check_inputs): A new function to verify all inputs
are accessible before further processing.
(check_output): A new function to open or create a specified
output file, before futher processing.
(stream_open): Adjust to truncating the previously opened
output file rather than opening directly.
(avoid_trashing_input): Optimize to stat the output file
descriptor, rather than the file name.
(main): Call the new functions to check accessibility of
inputs and output, before processing starts.
* tests/misc/sort: Adjust to the changed error message.
* tests/misc/sort-merge-fdlimit: Account for the earlier opened
file descriptor of the specified output file.
* tests/misc/sort-exit-early: A new test to exercise the improvements.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the improvement.
Pádraig Brady [Sat, 30 Jun 2012 23:04:37 +0000 (00:04 +0100)]
maint: avoid a -Wunsed-but-set warning on some systems
* src/stty.c (main): Mark speed_was_set as possibly unused,
as is the case when CIBAUD is undefined (on ppc64 GNU/Linux
for example). Reported-by: Stefano Lattarini
Jim Meyering [Sat, 30 Jun 2012 16:19:53 +0000 (18:19 +0200)]
stat,tail: recognize new file system type: aufs
* src/stat.c (human_fstype) [__linux__]: Add a 'case' for the new
remote file system type: aufs (0x61756673).
* NEWS (New features): Mention stat -f.
(Bug fixes): Mention it for tail -f.
Reported by Michael Mol in http://bugs.gnu.org/11823
Pádraig Brady [Tue, 26 Jun 2012 10:13:45 +0000 (11:13 +0100)]
maint: avoid a static analysis warning in csplit
The Canalyze static code analyzer correctly surmised
that there is a use-after-free bug in free_buffer()
at the line "struct line *n = l->next", if that
function is called multiple times.
This is not a runtime issue since a list of lines
will not be present in the !lines_found case.
* src/csplit.c (free_buffer): Set list head to NULL so
that this function can be called multiple times.
(load_buffer): Remove a redundant call to free_buffer().
Pádraig Brady [Fri, 22 Jun 2012 08:32:34 +0000 (09:32 +0100)]
split: ensure output doesn't overwrite input
* src/split.c (create): Check if output file is the
same inode as the input file.
* tests/split/guard-input: New test case.
* tests/Makefile.am: Reference new test case.
* NEWS: Mention the fix.
Improved-by: Jim Meyering Reported-by: François Pinard
Jim Meyering [Tue, 12 Jun 2012 14:13:43 +0000 (16:13 +0200)]
stty: portability: accommodate CIL
* src/stty.c (main): Declare locals "mode" and "new_mode" to be static
to ensure that each is initialized to zero, *including* all padding.
While gcc clears padding of a local automatic initialized to "{ 0, }",
CIL does not, and the C99 standard is not clear on this issue.
Reported by Edward Schwartz. See http://bugs.gnu.org/11675 for details.
Jim Meyering [Tue, 5 Jun 2012 10:24:49 +0000 (12:24 +0200)]
head: with --lines=-N (-n-N) reset file pointer on seekable input
* src/head.c (elide_tail_lines_seekable): Reset file pointer
after printing up to an end-relative line-counted offset.
Anoop Sharma reported the problem and suggested the fix.
* tests/misc/head-pos: Add coverage via a very similar, existing test.
Also add coverage for a previously untested block of code.
* tests/misc/head-elide-tail ($READ_BUFSIZE): Update to 8192, to
match the value of BUFSIZ I see today on Fedora 17/x86_64 (unrelated
to this fix).
* NEWS (Bug fixes): Mention it.
Jim Meyering [Fri, 1 Jun 2012 07:14:25 +0000 (09:14 +0200)]
stat,tail: recognize new file system type: panfs
* src/stat.c (human_fstype) [__linux__]: Add a 'case' for the new
remote file system type: panfs (0xAAD7AAEA).
* NEWS (New features): Mention stat -f.
(Bug fixes): Mention it for tail -f.
Reported by Travis Gummels in http://bugzilla.redhat.com/827199
Pádraig Brady [Mon, 28 May 2012 01:43:06 +0000 (02:43 +0100)]
cksum: line-buffer the printed checksums
This utility was inadvertently omitted from commit v8.0-34-g710fe41
* src/cksum.c (main): Set stdout to line buffered mode, to ensure
parallel running instances don't intersperse their output.
* NEWS: Mention the fix.
* THANKS.in: Add Anoop.
Reported by Anoop Sharma.
Jim Meyering [Sun, 20 May 2012 15:19:10 +0000 (17:19 +0200)]
maint: remove comment that suggested to remove support for mktemp -V
* src/mktemp.c (main): Don't suggest to remove support for -V, an
undocumented alias for --version, since that would introduce a
gratuitous incompatibility with the original mktemp program.
Mike Frysinger [Thu, 17 May 2012 04:00:11 +0000 (00:00 -0400)]
dircolors: add st/st-256color terminal types
See http://st.suckless.org/
* src/dircolors.hin: Add st and st-256color. Reported-by: Jeroen Roovers <jer@gentoo.org>, via
Mike Frysinger <vapier@gentoo.org> in http://bugs.gnu.org/11498
Jim Meyering [Sun, 1 Jan 2012 21:31:41 +0000 (22:31 +0100)]
id,groups: use gidtostr/uidtostr to avoid casts
* src/id.c (gidtostr, uidtostr): Define macros.
(gidtostr_ptr, uidtostr_ptr): Define safer functions.
Use gidtostr and uidtostr to print GID and UID without
need/risk of casts.
* src/group-list.c: Likewise.
Jim Meyering [Wed, 16 May 2012 05:26:36 +0000 (07:26 +0200)]
maint: tell xgettext that fputs arg "93% of..." is not a C format string
* src/fmt.c (usage): Add a comment to tell
xgettext that the "% o" in fputs argument string of "...93% of..."
is not a C format string. Reported by Toomas Soome, Göran Uddeborg,
Petr Pisar, Primoz PETERLIN and Chusslove Illich via
http://bugs.gnu.org/11470
projects / thirdparty / coreutils.git / log
