smb: client: fix double-free in SMB2_close() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_close_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Cc: stable@vger.kernel.org Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Cc: stable@vger.kernel.org Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: fix double-free in SMB2_open() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_open_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Cc: stable@vger.kernel.org Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Zhao Zhang [Thu, 18 Jun 2026 15:28:05 +0000 (23:28 +0800)]
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests.
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Assisted-by: Codex:GPT-5.4 Acked-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Zhao Zhang <zzhan461@ucr.edu> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Thu, 18 Jun 2026 16:21:50 +0000 (09:21 -0700)]
Merge tag 'v7.2-rc-part1-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- Use after free fixes
- Out of bounds read fix
- Add SMB compression support both at rest and over the wire: support
decompression of compressed SMB2 requests, initially allow compressed
SMB2 READ responses, and implement get/set compression operations for
per-file compression state.
- Credentials fixes: for various FSCTLs, setinfo, delete on close and
for alternate data streams
- Fix access checks and permission checks in DUPLICAT_EXTENTS and
SET_ZERO_DATA fsctls, find_file_posix_info, FILE_LINK_INFORMATION and
smb2_set_info_sec
- Reject non valid session in compound request
- Serialize QUERY_DIRECTORY
- Prevent path traversal bypass by restricting caseless retry
- Path lookup fix
- Two minor cleanup fixes
* tag 'v7.2-rc-part1-ksmbd-fixes' of git://git.samba.org/ksmbd: (31 commits)
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
ksmbd: use opener credentials for FSCTL mutations
ksmbd: use opener credentials for ADS I/O
ksmbd: require source read access for duplicate extents
ksmbd: run set info with opener credentials
ksmbd: use opener credentials for delete-on-close
ksmbd: serialize QUERY_DIRECTORY requests per file
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
ksmbd: enforce FILE_READ_ATTRIBUTES on SMB_FIND_FILE_POSIX_INFORMATION
ksmbd: reject non-VALID session in compound request branch
ksmbd: compress SMB2 READ responses
ksmbd: negotiate and decode SMB2 compression
cifs: negotiate chained SMB2 compression capabilities
smb: add common SMB2 compression transform helpers
smb: move LZ77 compression into common code
ksmbd: add per-handle permission check to FILE_LINK_INFORMATION
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
smb: server: remove code guarded by nonexistent config option
...
Linus Torvalds [Thu, 18 Jun 2026 16:18:00 +0000 (09:18 -0700)]
Merge tag 'v7.2-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Three cleanup patches
- Fix error return value in smb2_aead_req_alloc
- Three compression fixes
- Update i_blocks after write (fixes various xfstests)
- Fix races in cifsd thread creation
- Fix potential out of bounds read parsing security descriptors
- Witness protocol fix
- Fix umount bug
- Mount fix
- Fix cached directory entries on unlink/rmdir/rename
* tag 'v7.2-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Use more common code in SMB2_tcon()
smb: client: Use more common error handling code in smb3_reconfigure()
smb/client: Fix error code in smb2_aead_req_alloc()
smb/client: clean up a type issue in cifs_xattr_get()
smb/client: allow FS_IOC_SETFLAGS to clear compression
smb/client: use writable handle for FS_IOC_SETFLAGS compression
smb/client: always return a value for FS_IOC_GETFLAGS
smb/client: update i_blocks after contiguous writes
smb: client: fix races in cifsd thread creation
cifs: validate full SID length in security descriptors
smb: client: resolve SWN tcon from live registrations
cifs: remove all cifs files before kill super
smb: client: fix conflicting option validation for new mount API
cifs: invalidate cfid on unlink/rename/rmdir
Linus Torvalds [Thu, 18 Jun 2026 16:14:15 +0000 (09:14 -0700)]
Merge tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Jeff Layton wired up netlink upcalls for the auth.unix.ip and
auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches
in NFSD. The new kernel-user API is more extensible and lays the
groundwork for retiring the old pipe interface.
The default NFS r/w block size rises to 4MB on hosts with at least
16GB of RAM, reducing per-RPC overhead on fast networks. Smaller
machines keep their previously computed default, and the value remains
tunable through /proc/fs/nfsd/max_block_size.
Chuck Lever converted the server's RPCSEC GSS Kerberos code to the
kernel's shared crypto/krb5 library. The conversion retires and
removes SunRPC's bespoke implementation of Kerberos v5, but keeps
RPCSEC GSS-API.
Continuing the xdrgen migration that converted the NLMv4 server XDR
layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR
layer from hand-written C to xdrgen-generated code. As with the NLMv4
conversion in v7.1, the goals are improved memory safety, lower
maintenance burden, and groundwork for generation of Rust code for
this layer instead of C.
Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted
file system after it is unexported. A new netlink-based mechanism can
now release NLM locks and NFSv4 state by client address, by
filesystem, and by export. Now an administrator can quiesce an export
cleanly before unmounting it.
The remaining patches are bug fixes, clean-ups, and minor
optimizations, including a batch of memory-leak and use-after-free
fixes in the ACL, lockd, and TLS handshake paths, many of them
reported by Chris Mason. Sincere thanks to all contributors,
reviewers, testers, and bug reporters who participated in the v7.2
NFSD development cycle"
* tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (106 commits)
svcrdma: wake sq waiters when the transport closes
nfsd: reset write verifier on deferred writeback errors
nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
sunrpc: pin svc_xprt across the asynchronous TLS handshake callback
nfsd: fix posix_acl leak on SETACL decode failure
nfsd: fix posix_acl leak and ignored error in nfsd4_create_file
nfsd: check get_user() return when reading princhashlen
nfsd: fix inverted cp_ttl check in async copy reaper
nfsd: fix dead ACL conflict guard in nfsd4_create
NFSD: Fix SECINFO_NO_NAME decode error cleanup
sunrpc: harden rq_procinfo lifecycle to prevent double-free
SUNRPC: Return an error from xdr_buf_to_bvec() on overflow
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
nfsd: release layout stid on setlease failure
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure
lockd: Plug nlm_file leak when nlm_do_fopen() fails
Revert "NFSD: Defer sub-object cleanup in export put callbacks"
Revert "svcrdma: Use contiguous pages for RDMA Read sink buffers"
...
Linus Torvalds [Thu, 18 Jun 2026 15:50:52 +0000 (08:50 -0700)]
Merge tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix lots of bugs, most from the late 6.x era, but some going back
to 2.6.x
- Add subsystems (io-uring, passthrough) and respective maintainers
(Bernd, Joanne and Amir)
- Separate transport and fs layers (Miklos)
- Don't block on cat /dev/fuse (Joanne)
- Perform some refactoring in fuse-uring (Joanne)
- Don't use bounce-buffer for READDIR reply in virtio-fs (Matthew Ochs)
- Clean up documentation (Randy)
- Improve tracing (Amir)
- Extend page cache invalidation after DIO (Cheng Ding)
- Invalidate readdir cache on epoch change (Jun Wu)
- Misc cleanups
* tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (81 commits)
fuse-uring: clear ent->fuse_req in commit_fetch error path
fuse-uring: use named constants for io-uring iovec indices
fuse-uring: refactor setting up copy state for payload copying
fuse-uring: use enum types for header copying
fuse-uring: refactor io-uring header copying from ring
fuse-uring: refactor io-uring header copying to ring
fuse-uring: separate next request fetching from sending logic
fuse: invalidate readdir cache on epoch bump
virtio-fs: avoid double-free on failed queue setup
fuse: invalidate page cache after DIO and async DIO writes
fuse: set ff->flock only on success
fuse: clean up interrupt reading
fuse: remove stray newline in fuse_dev_do_read()
fuse: use READ_ONCE in fuse_chan_num_background()
fuse: dax: Move long delayed work on system_dfl_long_wq
fuse: add fuse_request_sent tracepoint
fuse: Add SPDX ID lines to some files
fuse: use QSTR() instead of QSTR_INIT() in fuse_get_dentry
fuse: convert page array allocation to kcalloc()
fuse: use current creds for backing files
...
Linus Torvalds [Thu, 18 Jun 2026 15:16:21 +0000 (08:16 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
Linus Torvalds [Thu, 18 Jun 2026 15:12:50 +0000 (08:12 -0700)]
Merge tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Bump required Clang version to 23 (Marco), and add Clang context
analysis annotations (Bart)
- Use the ahci_nr_ports() helper in libahci (me)
- Fail to probe the ahci driver if the BAR size is smaller than the
required size to support CAP.NP (Number of Ports) (liyouhong)
- Move EXPORT_SYMBOL_GPL(ahci_do_softreset) to be just below the
function definition (Bart)
- Make ata_scsi_scan_host() schedule hotplug work on the
system_dfl_long_wq workqueue so that it can benefit from scheduler
task placement (Marco)
- Make ata_scsi_port_error_handler() schedule hotplug work on the
system_dfl_long_wq workqueue, such that the work always uses the same
workqueue (me)
- Use devm_platform_get_and_ioremap_resource() in pata_arasan_cf driver
(Rosen)
- Fix ata_exec_internal() to only release and acquire the EH mutex if
the calling function is the one holding the EH mutex (Bart)
- Use hweight_long() to count the port_map bits (TanZheng)
- Add COMPILE_TEST support for pata_ep93xx driver (Rosen)
- Drop unused assignments from pata_isapnp driver (Uwe)
- Extend existing JMicron PMP quirk to include JMicron JMS562 (Xu)
- Drop unused assignments of pci_device_id driver data (Uwe)
- Use named initializers for pci_device_id arrays (Uwe)
* tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: Use named initializers for pci_device_id arrays
ata: Drop unused assignments of pci_device_id driver data
ata: libata-pmp: add JMicron JMS562 quirk
ata: pata_isapnp: Drop unused assignments from pnp_device_id array
ata: pata_ep93xx: add COMPILE_TEST support
ata: pata_ep93xx: use unsigned long for data
ata: pata_ep93xx: avoid asm on non ARM
ata: Annotate functions in the issuing path with __must_hold()
ata: libata: Pass ap parameter directly to functions in the issuing path
ata: libata: Document when host->eh_mutex should be held
ata: libata: Add an argument to ata_eh_reset()
ata: ahci: use hweight_long() to count port_map bits
ata: libata: Fix ata_exec_internal()
ata: pata_arasan_cf: simplify ioremap
ata: libata-eh: queue hotplug work on the system_dfl_long_wq workqueue
ata: libata-scsi: Move long delayed work on system_dfl_long_wq
ata: ahci: Move EXPORT_SYMBOL_GPL(ahci_do_softreset)
ata: ahci: fail probe if BAR too small for claimed ports
ata: libahci: use ahci_nr_ports() helper
Linus Torvalds [Thu, 18 Jun 2026 15:09:57 +0000 (08:09 -0700)]
Merge tag 'for-7.2/io_uring-epoll-20260616' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring epoll update from Jens Axboe:
"As discussed a few months ago, this pull request gets rid of allowing
nested epoll notification contexts via io_uring.
Nested contexts have been a source of issues on the epoll side, and
there should not be a need to support them from io_uring. The epoll
io_uring side exists mainly to facilitate a gradual migration from a
notification based epoll setup to an io_uring ditto"
* tag 'for-7.2/io_uring-epoll-20260616' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/epoll: disallow adding an epoll file to an epoll context
io_uring/epoll: switch to using do_epoll_ctl_file() interface
Linus Torvalds [Wed, 17 Jun 2026 19:33:23 +0000 (12:33 -0700)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"All various fixes:
- Typo breaking the veventq uAPI for 32 bit userspace
- Several Sashiko found errors in the veventq and fault fd paths
- Fix incorrect use of dmabuf locks, and possible races with iommufd
destroy and dmabuf revoke
- Sashiko errors found in the uAPI validation for IOMMU_HWPT_INVALIDATE"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Avoid copying the user array twice in the full-array copy helper
iommufd/selftest: Add invalidation entry_num and entry_len boundary tests
iommufd: Set upper bounds on cache invalidation entry_num and entry_len
iommufd: Clarify IOAS_MAP_FILE dma-buf support
iommufd: Destroy the pages content after detaching from dmabuf
iommufd: Take dma_resv lock before dma_buf_unpin() in release path
iommufd/selftest: Cover invalid read counts on vEVENTQ FD
iommufd: Avoid partial fault group delivery in iommufd_fault_fops_read()
iommufd: Break the loop on failure in iommufd_fault_fops_read()
iommufd: Reject invalid read count in iommufd_fault_fops_read()
iommufd: Propagate allocation failure in iommufd_veventq_deliver_fetch()
iommufd: Reject invalid read count in iommufd_veventq_fops_read()
iommufd: Rewind header length in done if iommufd_veventq_fops_read() fails
iommufd/selftest: Add boundary tests for veventq_depth
iommufd: Set veventq_depth upper bound
iommufd: Move vevent memory allocation outside spinlock
iommufd: Fix data_len byte-count vs element-count mismatch
iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read
Linus Torvalds [Wed, 17 Jun 2026 19:24:50 +0000 (12:24 -0700)]
Merge tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations
- Add pending-gather tracking to generic page-table invalidation
handling
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage
- Fix page-size bitmap calculation for smaller VA configurations
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding
- Honor IVINFO[VASIZE] when deriving address limits
- Fix premature loop termination in init_iommu_one()
- Add Hygon family 18h model 4h IOAPIC support
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs
- Constrain the clocks which can be specified for recent Qualcomm
SoCs
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS
- Ensure SMMU is powered-up when writing context bank for Adreno
client
- SMMUv3:
- Fix off-by-one in queue allocation retry loop
- Enable hardware update of access/dirty bits from the SMMU
- Re-jig command construction to use separate inline helpers for
each command type
Intel VT-d:
- Add the PCI segment number to DMA fault messages
- Improve support for non-PRI mode SVA
- Ensure atomicity during context entry teardown
- Fix RB-tree corruption in the probe error path
RISC-V IOMMU:
- Add NAPOT range invalidation support
- Use detailed gather information for invalidation decisions
- Compute the best stride for single invalidations
- Advertise Svpbmt support to the generic page-table code
- Add capability definitions and clean up command macro encoding
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver
- Add devicetree binding documentation and MAINTAINERS coverage
- Add the RK3588 VeriSilicon IOMMU node
- Apply small cleanups and warning fixes in the new driver
Rockchip IOMMU:
- Disable the fetch DTE time limit
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment"
* tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
iommu/amd: Control INVALIDATE_IOMMU_PAGES PDE from the gather
iommu/amd: Make CMD_INV_IOMMU_ALL_PAGES_ADDRESS match the spec
iommu/amd: Have amd_iommu_domain_flush_pages() use last
iommu/amd: Pass last in through to build_inv_address()
iommu/amd: Simplify build_inv_address()
iommu/apple-dart: correct CONFIG_PCIE_APPLE macro name in comment
iommu/vt-d: Fix RB-tree corruption in probe error path
iommu/vt-d: Improve IOMMU fault information
iommu/vt-d: Remove typo from pasid_pte_config_nested()
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
iommu/vt-d: Avoid WARNING in sva unbind path
dt-bindings: arm-smmu: Correct and add constraints for Hawi, Shikra and Kaanapali
dt-bindings: arm-smmu: Add compatible for Qualcomm Nord SoC
iommu/amd: Don't split flush for amd_iommu_domain_flush_all()
iommu/rockchip: disable fetch dte time limit
iommu/arm-smmu-v3: Allow ATS to be always on
PCI: Allow ATS to be always on for pre-CXL devices
PCI: Add pci_ats_required() for CXL.cache capable devices
iommu/vsi: Use list_for_each_entry()
...
Linus Torvalds [Wed, 17 Jun 2026 19:20:21 +0000 (12:20 -0700)]
Merge tag 'dma-mapping-7.2-2026-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added checks for DMA attributes in the debug code, especially to
ensure that mappings are created and released with matching
attributes (Leon Romanovsky)
- better default configuration for CMA on NUMA machines (Feng Tang)
- code cleanup in dma benchmark tool (Rosen Penev)
* tag 'dma-mapping-7.2-2026-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma: map_benchmark: turn dma_sg_map_param buf into a flexible array
dma-contiguous: simplify numa cma area handling
dma-contiguous: add kconfig option to setup numa cma area if not configured explicitly
dma-debug: Ensure mappings are created and released with matching attributes
dma-debug: Feed DMA attribute for unmapping flows too
dma-debug: Record DMA attributes in debug entry
dma-debug: Remove unused DMA attribute parameter
ntb: Use consistent DMA attributes when freeing DMA mappings
ntb: Store original DMA address for future release
Linus Torvalds [Wed, 17 Jun 2026 19:16:28 +0000 (12:16 -0700)]
Merge tag 'memblock-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small fixes and a cleanup:
- numa emulation: fix detection of under-allocated emulated nodes
- memblock tests: fix NUMA tests to properly differentiate reserved
areas with differnet flags
- mm_init: use div64_ul() instead of do_div() to better express the
intent of the division"
* tag 'memblock-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: mm_init: use div64_ul() instead of do_div()
tools/testing/memblock: fix stale NUMA reservation tests
mm/fake-numa: fix under-allocation detection in uniform split
Linus Torvalds [Wed, 17 Jun 2026 19:05:20 +0000 (12:05 -0700)]
Merge tag 'printk-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add upper case flavor for printing MAC addresses (%p[mM][U]) and use
it in the nintendo driver
- Fix matching of hash_pointers= parameter modes
- Fix size check of vsprintf() field_width and precision values
- Add check of size returned by vsprintf()
- Add KUnit test for restricted pointer printing (%pK)
- Some code cleanup
* tag 'printk-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
HID: nintendo: Use %pM format specifier for MAC addresses
vsprintf: Add upper case flavour to %p[mM]
lib/vsprintf: replace min_t/max_t with min/max
printk: fix typos in comments
lib/vsprintf: Require exact hash_pointers mode matches
vsprintf: Add test for restricted kernel pointers
vsprintf: Only export no_hash_pointers to test module
lib/vsprintf: Limit the returning size to INT_MAX
lib/vsprintf: Fix to check field_width and precision
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
Linus Torvalds [Wed, 17 Jun 2026 18:42:17 +0000 (11:42 -0700)]
Merge tag 'vfio-v7.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix out-of-tree vfio selftest builds with make O= (Jason Gunthorpe)
- Allow vfio selftests to build when ARCH=x86 is used for 64-bit x86
builds (David Matlack)
- Tighten vfio selftest infrastructure with stricter builds, safer path
handling, sysfs helpers, and reusable device/VF-token setup. Build on
that to add the SR-IOV UAPI selftest across supported IOMMU modes
(Raghavendra Rao Ananta)
- Conclude earlier vfio PCI BAR work already taken as v7.1 fixes by
replacing vfio_pci_core_setup_barmap() and direct barmap[] access
with vfio_pci_core_get_iomap(). Fix resulting sparse warnings (Matt
Evans)
- Simplify hisi_acc vfio-pci variant driver device-info reads by using
the mailbox's new direct command-based read helper (Weili Qian)
- Avoid duplicate reset handling in the Xe vfio-pci variant driver
reset-done path (GuoHan Zhao)
- Resolve a lockdep circular dependency splat by tracking active VFs
with a private sriov_active flag rather than calling pci_num_vf()
under memory_lock (Raghavendra Rao Ananta)
- Add CXL DVSEC-based readiness polling for Blackwell-Next in the
nvgrace-gpu vfio-pci variant driver, including interruptible,
lockless waits to support worst case spec defined timeouts (Ankit
Agrawal)
- Prevent vfio_mig_get_next_state() from spinning forever on blocked
migration state transition (Junrui Luo)
- Fix a qat vfio variant driver migration resume race by taking the
migration file lock before boundary checks (Giovanni Cabiddu)
- Add explicit dependencies between vfio selftest output object files
and output directories to ensure directories are always created
(David Matlack)
* tag 'vfio-v7.2-rc1' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Ensure libvfio output dirs are always created
vfio/qat: fix f_pos race in qat_vf_resume_write()
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio/nvgrace-gpu: Add Blackwell-Next GPU readiness check via CXL DVSEC
vfio/pci: Use a private flag to prevent power state change with VFs
vfio/pci: Fix sparse warning in vfio_pci_core_get_iomap()
vfio/xe: avoid duplicate reset in xe_vfio_pci_reset_done
hisi_acc_vfio_pci: simplify the command for reading device information
vfio/pci: Replace vfio_pci_core_setup_barmap() with vfio_pci_core_get_iomap()
vfio: selftests: Add tests to validate SR-IOV UAPI
vfio: selftests: Add helpers to alloc/free vfio_pci_device
vfio: selftests: Add helper to set/override a vf_token
vfio: selftests: Expose more vfio_pci_device functions
vfio: selftests: Extend container/iommufd setup for passing vf_token
vfio: selftests: Introduce a sysfs lib
vfio: selftests: Introduce snprintf_assert()
vfio: selftests: Add -Wall and -Werror to the Makefile
vfio: selftests: Allow builds when ARCH=x86
vfio: selftests: Fix out-of-tree build with make O=
Linus Torvalds [Wed, 17 Jun 2026 18:34:05 +0000 (11:34 -0700)]
Merge tag 'm68knommu-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- an update and config refresh for the stmark board
- fixes and preparatory work for supporting the DAC hardware block of
the m5441x ColdFire SoC
- forced configuration fix for legacy gpiolib when enabling the mcfqspi
driver
- new defconfigs for the M5329EVB, M54418EVB and NETtel boards to give
better build test coverage For ColdFire parts
- cleanup to register access code in the core init and setup code for
ColdFire SoC be consistent, instead of a varied use of
__raw_readX/__raw_write and straight readX/writeX.
This is working towards fixing the non-standard endianess of the
non-MMU m68k readX/writeX functions.
* tag 'm68knommu-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (22 commits)
m68k: stmark2: enable DACs outputs
m68k: stmark2: add mcf5441x DAC platform devices
m68k: stmark2: use ioport.h macros for resources
m68k: mcf5441x: add CCR MISCCR2 bitfields
m68k: mcf5441x: add CCM registers
m68k: add DAC modules base addresses
m68k: mcf5441x: add clock for DAC channel 1
m68k: mcf5441x: fix clocks numbering
m68k: coldfire: use ColdFire specifc IO access in SoC code
m68k: coldfire: use ColdFire specifc IO access in system code
m68k: coldfire: rename timer register access defines
m68k: coldfire: use ColdFire specifc IO access in timer code
m68k: coldfire: use ColdFire specifc IO access in interrupt code
m68k: coldfire: use ColdFire specific IO access in headers
m68k: coldfire: create IO access functions for internal registers
m68k: defconfig: update all ColdFire defconfigs
m68k: defconfig: add config for SnapGear/NETtel board
m68k: defconfig: add config for M54418EVB board
m68k: defconfig: add config for M5329EVB board
m68k: coldfire: select legacy gpiolib interface for mcfqspi
...
Linus Torvalds [Wed, 17 Jun 2026 18:28:10 +0000 (11:28 -0700)]
Merge tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC code updates from Arnd Bergmann:
"The largest addition here is the revived support for the ZTE ZX SoC
platform, though this mostly documentation.
The other changes are code cleanups that deal with continued
conversion of the GPIO library away from GPIO numbers to descriptors
and a few minor bugfixes"
* tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Axiado reviewer and Maintainers
ARM: remove the last few uses of do_bad_IRQ()
ARM: imx31: Fix IIM mapping leak in revision check
ARM: imx3: Fix CCM node reference leak
ARM: orion5x: update board check in mss2_pci_init() to use the DT
arm: mvebu_v5_defconfig: remove stale MACH_LINKSTATION_LSCHL reference
ARM: mvebu: simplify of_node_put calls
ARM: mvebu: drop unnecessary NULL check
arm: boot: ep93xx: don't rely on machine_is_*() for removed board files
ARM: zte: clean up zx297520v3 doc. warnings
arm64: Kconfig: drop unneeded dependency on OF_GPIO for ARCH_MVEBU
firmware: imx: sm-misc: Make scmi_imx_misc_ctrl_nb variable static
ARM: zte: Add zx297520v3 platform support
ARM: pxa: pxa27x: attach software node to its target GPIO controller
ARM: pxa: pxa25x: attach software node to its target GPIO controller
ARM: pxa: spitz: attach software nodes to their target GPIO controllers
ARM: pxa: statify platform device definitions in spitz board file
ARM: omap2: simplify allocation for omap_device
ARM: select legacy gpiolib interfaces where used
ARM: s3c: use gpio lookup table for LEDs
Linus Torvalds [Wed, 17 Jun 2026 18:26:33 +0000 (11:26 -0700)]
Merge tag 'soc-defconfig-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The main change this time is a cleanup series from Krzysztof Kozlowski
that updates the defconfig files to be more in sync with changes to
the Kconfig files that moved options around or removed the completely.
In addition, a number of drivers get enabled, in order to support more
hardware out of the box, as usual"
* tag 'soc-defconfig-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable BST SDHCI controller
arm64: configs: Update defconfig for AST2700 platform support
ARM: multi_v7_defconfig: Enable dma-buf heaps
ARM: configs: Drop duplicated CONFIG_EXT4_FS
arm64: defconfig: Enable DP83822 PHY driver
ARM: configs: at91: sama7: add sama7d65 i3c-hci
arm64: defconfig: Enable PCI M.2 power sequencing driver
arm64: defconfig: Enable CIX Sky1 pinctrl, PCIe host, and Cadence GPIO
ARM: multi_v7_defconfig: Correct QCOM_RPMH and QCOM_RPMHPD
ARM: multi_v7_defconfig: Cleanup redundant options
ARM: configs: Drop redundant SND_ATMEL_SOC
ARM: configs: Drop redundant I2C_DESIGNWARE_PLATFORM
ARM: multi_v7_defconfig: Move entries to match savedefconfig
arm64: defconfig: Switch Ethernet drivers to modules
arm64: defconfig: Drop unused Ethernet vendors
arm64: defconfig: Drop default or selected drivers
arm64: defconfig: Drop unused legacy netfilter options
arm64: defconfig: Move entries to match savedefconfig
pinctrl: qcom: Make important drivers default (2)
Linus Torvalds [Wed, 17 Jun 2026 18:21:40 +0000 (11:21 -0700)]
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Linus Torvalds [Wed, 17 Jun 2026 18:16:56 +0000 (11:16 -0700)]
Merge tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
Linus Torvalds [Wed, 17 Jun 2026 11:55:09 +0000 (12:55 +0100)]
Merge tag 'audit-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Fix a recursive deadlock when duplicating executable file rules
Avoid multiple lookups and attempted I_MUTEX_PARENT locks when moving
watched files by passing the already resolved inodes through the
audit code.
- Fix removal of executable watch rules after the file is deleted
Prior to this fix we were unable to remove an executable file watch
where the file had been previously deleted due to a negative dentry
check in the code that performs the lookup on the file watches.
- Convert our basic "unsigned" type usage to "unsigned int".
* tag 'audit-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix recursive locking deadlock in audit_dupe_exe()
audit: fix removal of dangling executable rules
audit: use 'unsigned int' instead of 'unsigned'
Linus Torvalds [Wed, 17 Jun 2026 11:41:00 +0000 (12:41 +0100)]
Merge tag 'selinux-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A number of SELinux patches, almost all of which are either minor
fixes or hardening patches:
- Additional verifications when loading new SELinux policy
Multiple patches by Christian Göttsche to add additional
validations to the code responsible for loading and parsing SELinux
policy as it is loaded into the kernel.
- Avoid nontransitive comparisons comparisons in our sorting code
Done to prevent unexpected sorting results due to overflow. Qualys
documented a similar issue with glibc
https://www.qualys.com/2024/01/30/qsort.txt
- Consistently use u16 for SELinux security classes
- Move from page allocations to kmalloc() based allocations
Unfortunately one of these patches had to be reverted, but you
should see a fixed version during the next merge window.
- Move from kmalloc_objs() to kzalloc_objs() in the policy load code
- Reorder sel_kill_sb() slightly to match other pseudo filesystems
- Simplify things with QSTR() instead of QSTR_INIT()
- Minor comment typo fixes"
* tag 'selinux-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: revert use of __getname() in selinux_genfs_get_sid()
selinux: comment spelling fix in ibpkey.c
selinux: comment typo fix in selinuxfs.c
selinux: hooks: use __getname() to allocate path buffer
selinux: use k[mz]alloc() to allocate temporary buffers
selinux: check for simple types
selinux: more strict bounds check
selinux: beef up isvalid checks
selinux: reorder policydb_index()
selinux: check type attr map overflows
selinux: check length fields in policies
selinux: more strict policy parsing
selinux: use u16 for security classes
selinux: avoid nontransitive comparison
selinux: switch two allocations to use kzalloc_objs()
selinux: fix sel_kill_sb()
selinux: use QSTR() instead of QSTR_INIT() in init_sel_fs
Linus Torvalds [Wed, 17 Jun 2026 11:34:16 +0000 (12:34 +0100)]
Merge tag 'lsm-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm update from Paul Moore:
"A single LSM update the security_inode_listsecurity() hook to be able
to leverage the xattr_list_one() helper function.
We wanted to do this for a while, but we needed to fixup the callers
in the NFS code first. With the NFS code changes shipping in Linux
v7.0 and no one complaining, it seemed a good time to complete the
shift"
* tag 'lsm-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
security,fs,nfs,net: update security_inode_listsecurity() interface
Linus Torvalds [Wed, 17 Jun 2026 11:10:11 +0000 (12:10 +0100)]
Merge tag 'sched_ext-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
"Most of this continues the in-development sub-scheduler support, which
lets a root BPF scheduler delegate to nested sub-schedulers. The
dispatch-path building blocks landed in 7.1. A follow-up patchset in
development will complete enqueue-path support for hierarchical
scheduling. This cycle adds most of that infrastructure:
- Topological CPU IDs (cids): a dense, topology-ordered CPU numbering
where the CPUs of a core, LLC, or NUMA node form contiguous ranges,
so a topology unit becomes a (start, length) slice. Raw CPU numbers
are sparse and don't track topological closeness, which makes them
clumsy for sharding work across sub-schedulers and awkward in BPF.
- cmask: bitmaps windowed over a slice of cid space, so a
sub-scheduler can track, for example, the idle cids of its shard
without a full NR_CPUS cpumask.
- A struct_ops variant that cid-form sub-schedulers register with,
along with the cid-form kfuncs they call.
- BPF arena integration, which sub-scheduler support is built on. The
bpf-next additions let the kernel read and write the BPF
scheduler's arena directly, turning it into a real kernel/BPF
shared-memory channel. Shared state like the per-CPU cmask now
lives there.
- scx_qmap is reworked to exercise the new arena and cid interfaces.
Additionally:
- Exit-dump improvements: dump the faulting CPU first, expose the
exit CPU to BPF and userspace, and normalize the dump header.
- Misc kfuncs and cleanups: a task-ID lookup kfunc, __printf checking
on the error and dump formatters, header reorganization, and
assorted fixes"
* tag 'sched_ext-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (59 commits)
sched_ext: Add scx_arena_to_kaddr() / scx_kaddr_to_arena()
sched_ext: Make scx_bpf_kick_cid() return s32
sched_ext: Add scx_cmask_test() and scx_cmask_for_each_cid()
tools/sched_ext: Order single-cid cmask helpers as (cid, mask)
sched_ext: Order single-cid cmask helpers as (cid, mask)
selftests/sched_ext: Fix dsq_move_to_local check
sched_ext: Guard BPF arena helper calls to fix 32-bit build
sched_ext: idle: Fix errno loss in scx_idle_init()
sched_ext: Convert ops.set_cmask() to arena-resident cmask
sched_ext: Sub-allocator over kernel-claimed BPF arena pages
sched_ext: Require an arena for cid-form schedulers
sched_ext: Add cmask mask ops
sched_ext: Track bits[] storage size in struct scx_cmask
sched_ext: Rename scx_cmask.nr_bits to nr_cids
tools/sched_ext: scx_qmap: Fix qa arena placement
sched_ext: Mark !CONFIG_EXT_SUB_SCHED dummy stubs static inline
sched_ext: Replace tryget_task_struct() with get_task_struct()
sched_ext: Add scx_task_iter_relock() and use it in scx_root_enable_workfn()
sched_ext: Fix ops_cid layout assert
sched_ext: Use offsetofend on both sides of the ops_cid layout assert
...
Linus Torvalds [Wed, 17 Jun 2026 11:03:56 +0000 (12:03 +0100)]
Merge tag 'cgroup-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Last cycle deferred css teardown on cgroup removal until the cgroup
depopulated, so a css is not taken offline while tasks can still
reference it. Disabling a controller through cgroup.subtree_control
still had the same problem. This reworks the deferral from per-cgroup
to per-css so that path is covered too.
- New RDMA controller monitoring files: rdma.peak for per-device peak
usage and rdma.events / rdma.events.local for resource-limit
exhaustion. The max-limit parser was rewritten, fixing two input
parsing bugs.
- cpuset: fix a sched-domain leak on the domain-rebuild failure path
and skip a redundant hardwall ancestor scan on v2.
- Misc: pair the remaining lockless cgroup.max.* reads with WRITE_ONCE,
assorted selftest robustness fixes, and doc path corrections.
* tag 'cgroup-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (22 commits)
cgroup: Migrate tasks to the root css when a controller is rebound
docs: cgroup: Fix stale source file paths
cgroup/cpuset: Free sched domains on rebuild guard failure
cgroup: pair max limit READ_ONCE() with WRITE_ONCE()
selftests/cgroup: enable memory controller in hugetlb memcg test
cgroup/rdma: Drop unnecessary READ_ONCE() on event counters
cgroup: Defer kill_css_finish() in cgroup_apply_control_disable()
cgroup: Add per-subsys-css kill_css_finish deferral
cgroup: Move populated counters to cgroup_subsys_state
cgroup: Annotate unlocked nr_populated_* accesses with READ_ONCE/WRITE_ONCE
cgroup: Inline cgroup_has_tasks() in cgroup.h
cgroup/rdma: document rdma.peak, rdma.events and rdma.events.local
cgroup/rdma: add rdma.events.local for per-cgroup allocation failure attribution
cgroup/rdma: add rdma.events to track resource limit exhaustion
cgroup/rdma: add rdma.peak for per-device peak usage tracking
selftests/cgroup: check malloc return value in alloc_anon functions
cgroup/cpuset: Skip hardwall ancestor scan in cpuset v2 in cpuset_current_node_allowed()
selftests/cgroup: fix misleading debug message in test_cgfreezer_time_child
selftests/cgroup: fix child process escaping to parent cleanup in test_cpucg_nice
selftests/cgroup: Add NULL check after malloc in cgroup_util.c
...
Linus Torvalds [Wed, 17 Jun 2026 10:57:44 +0000 (11:57 +0100)]
Merge tag 'wq-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Continued progress toward making alloc_workqueue() unbound by
default: more callers converted to WQ_PERCPU / system_percpu_wq /
system_dfl_wq, and new warnings for queues that use neither WQ_PERCPU
nor WQ_UNBOUND or the legacy system_wq / system_unbound_wq.
- Misc: drop the now-trivial apply_wqattrs_lock()/unlock() wrappers,
forbid the TEST_WORKQUEUE benchmark from being built-in, and fix a
spurious pointer level in the worker debug-dump path.
* tag 'wq-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
drm/bridge: anx7625: Add WQ_PERCPU add to alloc_workqueue
wifi: ath6kl: fix invalid workqueue flags in ath6kl_usb_create()
btrfs: Drop WQ_PERCPU from ordered_flags in btrfs_init_workqueues()
workqueue: Add warnings and ensure one among WQ_PERCPU or WQ_UNBOUND is present
workqueue: Add warnings and fallback if system_{unbound}_wq is used
workqueue: drop spurious '*' from print_worker_info() fn declaration
workqueue: forbid TEST_WORKQUEUE from being built-in
workqueue: drop apply_wqattrs_lock()/unlock() wrappers
umh: replace use of system_unbound_wq with system_dfl_wq
rapidio: rio: add WQ_PERCPU to alloc_workqueue users
media: ddbridge: add WQ_PERCPU to alloc_workqueue users
platform: cznic: turris-omnia-mcu: replace use of system_wq with system_percpu_wq
media: synopsys: hdmirx: replace use of system_unbound_wq with system_dfl_wq
virt: acrn: Add WQ_PERCPU to alloc_workqueue users
Linus Torvalds [Wed, 17 Jun 2026 10:38:38 +0000 (11:38 +0100)]
Merge tag 'bitmap-for-7.2' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
Linus Torvalds [Wed, 17 Jun 2026 10:35:58 +0000 (11:35 +0100)]
Merge tag 'modules-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Sami Tolvanen:
- Add a missing return value check for module_extend_max_pages() to
prevent a kernel oops on memory allocation failure.
- Force sh_addr to 0 for architecture-specific module sections on arm,
arm64, m68k, and riscv. This prevents non-zero section addresses when
linking modules with ld.bfd -r, which may cause tools to misbehave
and result in worse compressibility.
- Replace pr_warn! with pr_warn_once! for set_param null pointer
warnings in Rust abstractions, now that the _once variant is
available.
* tag 'modules-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
rust: module_param: add missing newline to pr_warn_once
module: decompress: check return value of module_extend_max_pages()
rust: module_param: use `pr_warn_once!` for null pointer warning
module, riscv: force sh_addr=0 for arch-specific sections
module, m68k: force sh_addr=0 for arch-specific sections
module, arm64: force sh_addr=0 for arch-specific sections
module, arm: force sh_addr=0 for arch-specific sections
Linus Torvalds [Wed, 17 Jun 2026 10:18:45 +0000 (11:18 +0100)]
Merge tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Unsurprisingly, we've had a fairly busy development cycle with various
fixes and enhancements. While the majority of changes consist of
device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core
structures
- Integration of new simple refcount helper functions to simplify
code
ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete
SH Ecovec24/7724se boards
HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier
(MF200), Novation (Mininova), and Behringer (Flow 8) USB-audio
devices
- Improved robustness by rolling back or propagating write errors to
the mixer control caches (Babyface Pro, US-16x08, Scarlett)
Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers"
* tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (483 commits)
ALSA: usb-audio: Add iface reset and delay quirk for XIBERIA K03S
ALSA: hda/realtek: Add quirk for Lenovo Xiaoxin 14 GT
ALSA: hda/realtek: Add CS35L41 I2C quirk for ASUS UM3405GA
ALSA: timer: Fix racy timeri->timer changes with rwlock
ALSA: core: Fix unintuitive behavior of snd_power_ref_and_wait()
ALSA: seq: avoid stale FIFO cells during resize
ALSA: seq: oss: Serialize readq reset state with q->lock
ASoC: dt-bindings: Fix RT5677 "realtek,gpio-config" type
ASoC: audio-graph-card2: recommend to use auto select DAI format
ASoC: update auto format selection method
ASoC: renesas: rcar: update auto select format
ASoC: codecs: pcm3168a: update auto select format
ASoC: codecs: ak4619: update auto select format
ASoC: codecs: peb2466: don't use array if single pattern
ASoC: codecs: idt821034: don't use array if single pattern
ASoC: codecs: framer-codec: don't use array if single pattern
ASoC: remove SND_SOC_POSSIBLE_xBx_xFx
ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO
ALSA: seq: Don't re-bounce the error event
ASoC: bcm: cygnus: use scoped child node loop
...
Linus Torvalds [Wed, 17 Jun 2026 09:21:00 +0000 (10:21 +0100)]
Merge tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
Linus Torvalds [Wed, 17 Jun 2026 08:18:14 +0000 (09:18 +0100)]
Merge tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
Linus Torvalds [Wed, 17 Jun 2026 07:17:00 +0000 (08:17 +0100)]
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Davide Ornaghi [Mon, 15 Jun 2026 11:35:01 +0000 (20:35 +0900)]
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed.
Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access") Cc: stable@vger.kernel.org Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sat, 13 Jun 2026 13:00:04 +0000 (22:00 +0900)]
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations.
Cc: stable@vger.kernel.org Reported-by: Musaab Khan <musaab.khan@protonmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sat, 13 Jun 2026 13:00:03 +0000 (22:00 +0900)]
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened.
Cc: stable@vger.kernel.org Reported-by: Musaab Khan <musaab.khan@protonmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sat, 13 Jun 2026 13:00:02 +0000 (22:00 +0900)]
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths.
Cc: stable@vger.kernel.org Reported-by: Musaab Khan <musaab.khan@protonmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sat, 13 Jun 2026 13:00:01 +0000 (22:00 +0900)]
ksmbd: run set info with opener credentials
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides already used by rename and link helpers.
Cc: stable@vger.kernel.org Reported-by: Musaab Khan <musaab.khan@protonmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sat, 13 Jun 2026 13:00:00 +0000 (22:00 +0900)]
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close.
Cc: stable@vger.kernel.org Reported-by: Musaab Khan <musaab.khan@protonmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Thu, 11 Jun 2026 23:00:00 +0000 (08:00 +0900)]
ksmbd: serialize QUERY_DIRECTORY requests per file
smb2_query_dir() stores a pointer to its stack-allocated private data in
the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the
same file handle can overwrite this pointer while an iterate_dir() callback
is still using it, resulting in a stack use-after-free.
Add a per-file mutex and hold it while accessing the shared directory
enumeration state. The lock covers scan restart, dot entry state,
readdir_data setup and iteration, and response construction. This prevents
another request from replacing readdir_data.private before the current
request has finished using it and also serializes the shared file position.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-30527 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Thu, 11 Jun 2026 22:15:38 +0000 (07:15 +0900)]
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data.
Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Thu, 11 Jun 2026 13:59:51 +0000 (22:59 +0900)]
ksmbd: enforce FILE_READ_ATTRIBUTES on SMB_FIND_FILE_POSIX_INFORMATION
find_file_posix_info() in smb2_query_info() returns file metadata (owner
uid, group gid, mode, inode, size, allocation size, hard-link count and all
four timestamps) but performs no per-handle access check. Every sibling
query handler gates on the handle's granted access first --
get_file_basic_info(), get_file_all_info(), get_file_network_open_info()
and get_file_attribute_tag_info() all reject a handle lacking
FILE_READ_ATTRIBUTES_LE with -EACCES. The POSIX handler is gated only by
the connection-scoped tcon->posix_extensions flag, which is not a
per-handle authorization, so a handle opened with only FILE_WRITE_DATA is
correctly denied FileBasicInformation yet is allowed the strict-superset
POSIX info. Mirror the FILE_READ_ATTRIBUTES_LE gate the sibling info
handlers already use.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Thu, 11 Jun 2026 13:59:19 +0000 (22:59 +0900)]
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check.
Fixes: 5005bcb42191 ("ksmbd: validate session id and tree id in the compound request") Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Wed, 10 Jun 2026 09:46:10 +0000 (18:46 +0900)]
ksmbd: compress SMB2 READ responses
Handle SMB2_READFLAG_REQUEST_COMPRESSED for non-RDMA reads.
Flatten the response iov, emit chained or unchained LZ77 transforms when
compression is beneficial, and retain the generated buffer until the work
item is released.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Advertise LZ77 and Pattern_V1 with chained transform support in the
SMB 3.1.1 compression negotiate context. Validate the server's returned
algorithm list and flags, then retain the negotiated capabilities for a
future compressed transform receive implementation.
This patch only negotiates capabilities. It does not request compressed
READ responses or add a compressed transform receive path.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Wed, 10 Jun 2026 11:13:51 +0000 (20:13 +0900)]
ksmbd: add per-handle permission check to FILE_LINK_INFORMATION
The FILE_LINK_INFORMATION arm of smb2_set_info_file() calls
smb2_create_link() with no per-handle fp->daccess check. On the
ReplaceIfExists path smb2_create_link() unlinks an existing file at the
target name (ksmbd_vfs_remove_file) and creates a hardlink
(ksmbd_vfs_link); neither helper checks daccess. A handle opened with
FILE_READ_DATA only (no FILE_DELETE, no FILE_WRITE_DATA) can therefore
delete an arbitrary file in the share and plant a hardlink over its name.
The sibling delete/move arms in the same switch already gate:
FILE_RENAME_INFORMATION and FILE_DISPOSITION_INFORMATION both require
FILE_DELETE_LE; FILE_FULL_EA_INFORMATION requires FILE_WRITE_EA_LE. Gate
the link arm the same way as its closest analogue (rename), since it
mutates the namespace and, on replace, deletes an existing entry.
This is a sibling of commit cc57232cae23 ("ksmbd: fix FSCTL permission
bypass by adding a permission check for FSCTL_SET_SPARSE").
Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Wed, 10 Jun 2026 11:07:04 +0000 (20:07 +0900)]
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA.
Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Tue, 9 Jun 2026 00:00:00 +0000 (00:00 +0000)]
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via
set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and
rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().
Every other persistent-mutation arm of the sibling handler
smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /
FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm —
which mutates the access control itself — is the only one with no gate.
A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no
FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType
SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself
access the handle's daccess never carried. Unlike the FSCTL data arms this
is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop —
the missing fp->daccess check is the entire gate.
Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so
require at least one of those on the handle before re-permissioning the
file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info().
Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Gil Portnoy [Wed, 10 Jun 2026 10:53:14 +0000 (19:53 +0900)]
ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on
double SMB2_CANCEL") made smb2_cancel() skip a work whose state is
KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But
KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same
freeing producer path is reached for CLOSED too:
SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets
the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock()
worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s
the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes
the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the
cancelled branch, skips release_async_work(). The work stays on
conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock
pointing at the freed file_lock.
A subsequent SMB2_CANCEL for the same AsyncId then passes the
KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so
smb2_cancel() fires cancel_fn again over the freed file_lock -- the same
use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit)
... cache file_lock_cache of size 192
Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with
KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is
silent on that kernel, so the splat is attributable to the CLOSE trigger.
Only an ACTIVE deferred work may have its cancel_fn fired: both terminal
states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees
the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE
so any non-active work is skipped.
Fixes: f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") Cc: stable@vger.kernel.org Signed-off-by: Gil Portnoy <dddhkts1@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: remove code guarded by nonexistent config option
A small piece of code in fs/smb/server/smb_common.c depends on
CONFIG_SMB_INSECURE_SERVER, which has never been defined in the
mainline kernel, but was present in old out-of-tree versions of ksmbd.
Remove this dead code.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Sun, 7 Jun 2026 11:15:51 +0000 (20:15 +0900)]
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately.
Cc: stable@vger.kernel.org Reported-by: Y s65 <yu4ys@outlook.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Davide Ornaghi [Sat, 6 Jun 2026 07:11:04 +0000 (16:11 +0900)]
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel().
Cc: stable@vger.kernel.org Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Guangshuo Li [Fri, 5 Jun 2026 04:30:16 +0000 (12:30 +0800)]
ksmbd: fix use-after-free in same_client_has_lease()
same_client_has_lease() returns an opinfo pointer from ci->m_op_list
after dropping ci->m_lock without taking a reference.
smb_grant_oplock() then dereferences that pointer in copy_lease() and
when checking breaking_cnt. A concurrent close can remove the old lease
from ci->m_op_list and drop the last reference before the caller uses
the returned pointer, leading to a use-after-free.
Take a reference when same_client_has_lease() selects an existing lease,
drop any previous match while scanning, and release the returned
reference in smb_grant_oplock() after copying the lease state.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Hem Parekh [Tue, 2 Jun 2026 23:56:46 +0000 (16:56 -0700)]
ksmbd: fix out-of-bounds read in smb_check_perm_dacl()
The permission-check ACE walk in smb_check_perm_dacl() validates the ACE
header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it
never checks that ace->size is actually large enough to contain
num_subauth sub-authorities before compare_sids() dereferences them.
CIFS_SID_BASE_SIZE covers the SID header up to but excluding the
sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header,
so the existing guards only guarantee the 8-byte SID base, i.e. zero
sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for
i < min(local_sid->num_subauth, ace->sid.num_subauth). The local
comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid()
result) always have at least one sub-authority, and an attacker controls
the ACE revision and authority bytes (which lie within the in-bounds SID
base), so they can match one of those SIDs and force the sub_auth read.
A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of
the security descriptor therefore causes a heap out-of-bounds read of up
to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd
allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr()
into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in
ndr_decode_v4_ntacl()), so the read lands past the allocation. The
malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL
is not normalised before being written to the security.NTACL xattr) and
the read fires on a subsequent SMB2_CREATE access check, making this
reachable by an authenticated client on a share that uses ACL xattrs.
Add the missing num_subauth-versus-ace_size check, mirroring the
identical guards already present in the sibling parsers parse_dacl() and
smb_inherit_dacl().
Fixes: d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") Cc: stable@vger.kernel.org Signed-off-by: Hem Parekh <hemparekh1596@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
syzbot reported use-after-free of net->ipv4.rules_ops. [0]
It can be reproduced with these commands:
while true; do
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/24 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 address add 198.51.100.1/24 dev dummy1
ip -n ns1 rule add ipproto tcp sport 12345 table 12345
ip -n ns1 fou add port 5555 ipproto 47 local 192.0.2.1 peer 198.51.100.2 peer_port 54321
ip netns del ns1
done
The cited commit moved fib4_rules_exit() earlier to ->exit_rtnl(),
but the kernel socket destroyed in ->exit() could eventually reach
__fib_lookup().
I left fib4_rules_exit() in ->exit_rtnl() because fib4_rule_delete()
calls fib_unmerge(), which requires RTNL.
However, when ->delete() is called, ->configure() has already been
called, thus fib_unmerge() in ->delete() has no effect.
Let's remove fib_unmerge() in fib4_rule_delete() and move
fib4_rules_exit() to ->exit().
Many thanks to Ido Schimmel for providing the nice repro very quickly.
Note that we can make fib_rules_ops.delete() return void once
net-next opens.
[0]:
BUG: KASAN: slab-use-after-free in fib_rules_lookup+0x15e/0xeb0 net/core/fib_rules.c:321
Read of size 8 at addr ffff88804ec4c680 by task kworker/u8:21/12641
Eric Dumazet [Tue, 16 Jun 2026 14:13:17 +0000 (14:13 +0000)]
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped).
Fixes: e9e4dd3267d0 ("net: do not process device backlog during unregistration") Reported-by: syzbot+965506b59a2de0b6905c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a315824.b0403584.28d0ff.0000.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260616141317.407791-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c 406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms") 79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check") d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
Yiming Qian [Wed, 10 Jun 2026 06:21:36 +0000 (06:21 +0000)]
net: skmsg: preserve sg.copy across SG transforms
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Cc: stable@vger.kernel.org Reported-by: Yiming Qian <yimingqian591@gmail.com> Reported-by: Keenan Dong <keenanat2000@gmail.com> Signed-off-by: Yiming Qian <yimingqian591@gmail.com> Link: https://patch.msgid.link/20260610062137.49075-1-yimingqian591@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
appletalk: move the protocol out of tree
This tiny series moves appletalk out of tree, to:
https://github.com/linux-netdev/mod-orphan
Core maintainainers are unable to keep up with the rate of security
bug reports and fixes. Nobody seems to care about appletalk enough
to review the patches.
As Eric pointed out Mac OS dropped AppleTalk over a decade ago.
====================
Jakub Kicinski [Mon, 15 Jun 2026 22:29:35 +0000 (15:29 -0700)]
appletalk: move the protocol out of tree
AppleTalk has been removed in MacOS X 10.6 (Snow Leopard), in 2009,
according to Wikipedia. We recently got a burst of AI generated
fixes to this protocol which nobody is reviewing.
Let AppleTalk follow AX.25 and hamradio out of the Linux tree.
We we will maintain the code at: github.com/linux-netdev/mod-orphan
for anyone interested in playing with it.
Retain the uAPI for now. No strong reason, simply because I suspect
keeping it will be less controversial.
Jakub Kicinski [Mon, 15 Jun 2026 22:29:34 +0000 (15:29 -0700)]
appletalk: stop storing per-interface state in struct net_device
AppleTalk keeps its per-interface control block (struct atalk_iface)
directly in struct netdevice (dev->atalk_ptr). This is the only thing
tying the protocol into the core net_device layout and is the sole
blocker to moving AppleTalk out of tree.
Replace dev->atalk_ptr with a small ifindex-keyed hashtable internal
to ddp.c. The existing atalk_interfaces list stays the owner of the iface
objects; the hashtable is purely a fast dev->iface index and reuses
the same atalk_interfaces_lock.
AFAICT this patch does not make this code any more racy than it already
is, I'm sure Sashiko will point out some basically existing bugs.
AFAICT atalk_interfaces_lock is the innermost lock already.
Jacob Moroni [Tue, 16 Jun 2026 15:56:01 +0000 (15:56 +0000)]
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose.
Junxian Huang [Sat, 13 Jun 2026 10:20:45 +0000 (18:20 +0800)]
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Zhenhao Wan [Thu, 11 Jun 2026 17:15:54 +0000 (01:15 +0800)]
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://patch.msgid.link/r/20260612-master-v1-1-70cde5c6fdc9@gmail.com Reported-by: Yuhao Jiang <danisjiang@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
docs: infiniband: correct name of option to enable the ib_uverbs module
The Infiniband documentation states that CONFIG_INFINIBAND_USER_VERBS
should be used to enable the ib_uverbs module. However, this option was
renamed to CONFIG_INFINIBAND_USER_ACCESS in commit 17781cd6186c
("[PATCH] IB: clean up user access config options"). Update the
documentation to reflect this.
Selvin Xavier [Mon, 15 Jun 2026 22:47:51 +0000 (15:47 -0700)]
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
If a user calls BNXT_RE_METHOD_GET_TOGGLE_MEM on a device that does not
support the CQ/SRQ toggle feature, uctx_cq_page or uctx_srq_page will
be NULL.
Add an explicit -EOPNOTSUPP return after capturing the address from
uctx_cq_page / uctx_srq_page if the address is zero.
Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace") Fixes: 181028a0d84c ("RDMA/bnxt_re: Share a page to expose per SRQ info with userspace") Link: https://patch.msgid.link/r/20260615224751.232802-16-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Selvin Xavier [Mon, 15 Jun 2026 22:47:47 +0000 (15:47 -0700)]
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page.
Fixes: eee6268421a2 ("RDMA/bnxt_re: Move the UAPI methods to a dedicated file") Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push") Link: https://patch.msgid.link/r/20260615224751.232802-12-selvin.xavier@broadcom.com Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
====================
tls: reject the combination of TLS and sockmap
There are no known TLS+sockmap users and it has some known
hard to solve bugs. Let's reject this configuration as we
discussed a number of times.
====================
Jakub Kicinski [Sun, 14 Jun 2026 01:41:00 +0000 (18:41 -0700)]
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
TLS and sockmap are mutually exclusive. We already have a test
for the sockmap side rejecting kTLS, add the inverse test matching
patch 1 of this series.
Jakub Kicinski [Sun, 14 Jun 2026 01:40:59 +0000 (18:40 -0700)]
selftests/bpf: drop the unused kTLS program from test_sockmap
With the sockmap + kTLS tests gone, the BPF-side support in test_sockmap
is dead: the tls_sock_map map and bpf_prog3 (which redirected skbs into
it) are no longer referenced. Remove them, along with the now-unused
bpf_write_pass() helper.
bpf_prog3 was progs[2], so renumber the progs[] users in test_sockmap.c:
the sockops program drops to progs[2] and the sk_msg tx programs to
progs[3..7]. Shrink the map/prog arrays from 9 to 8 and drop the
tls_sock_map entry (the last one) from map_names[] to match.
Jakub Kicinski [Sun, 14 Jun 2026 01:40:58 +0000 (18:40 -0700)]
selftests/bpf: remove sockmap + ktls tests
The combination of sockmap and TLS is no longer supported - installing
the TLS ULP on a sockmap socket (and vice versa) is now rejected. Remove
the tests that exercise the combination along with their BPF program;
the file covered nothing but sockmap sockets holding kTLS contexts.
Jakub Kicinski [Sun, 14 Jun 2026 01:40:57 +0000 (18:40 -0700)]
tls: remove dead sockmap (psock) handling from the SW path
TLS and sockmap are now mutually exclusive. Try to delete the code
from sendmsg and recvmsg path which is now obviously dead.
The main goal is to delete enough code for AI security scanners
to no longer bother us with sockmap related bugs. At the same
time retain the code in case someone has the cycles to fix
all of this and make the integration work, again.
If the integration does not get restored we can wipe the rest
of the skmsg code from TLS in two or three releases.
The changes on the Tx side are deeper since that's where most
of the bugs are, Rx side simply takes the data from sockmap
and gives it to the user. On Tx split record handling and
rolling back the iterator were the two problem areas.
Jakub Kicinski [Sun, 14 Jun 2026 01:40:56 +0000 (18:40 -0700)]
tls: reject the combination of TLS and sockmap
TLS and sockmap (BPF psock) integration hides a lot of latent bugs.
Bugs which may be more or less relevant for real users but they
are definitely exploitable.
We could not find anyone actively using this integration so let's
reject this config. Adding a TLS socket to a sockmap was already
rejected by sk_psock_init() through the inet_csk_has_ulp() check.
We need to reject the attempts to configure the TLS keys (rather
than adding the ULP itself) because checking prior to the ULP
installation is tricky without risking a race with sockmap getting
added in parallel (sockmap does not hold the socket lock).
This patch is a minimal rejection of the feature. Subsequent patch
in the series will do a light dead code removal. Full cleanup would
require a major rewrite of the Tx path, we don't need skmsg any more.
Jakub Kicinski [Tue, 16 Jun 2026 15:53:56 +0000 (08:53 -0700)]
Merge branch 'atm-remove-more-dead-code'
Jakub Kicinski says:
====================
atm: remove more dead code
Commit 6deb53595092 ("net: remove unused ATM protocols and legacy
ATM device drivers") removed a good chunk of old ATM drivers.
Our goal going forward is to limit the ATM support to PPPoATM
used in ADSL deployments.
A recent burst of AI generated fixes for net/atm/signaling.c and
net/atm/svc.c made me look closer at the remaining code. PPPoATM runs
over permanent virtual circuits (PF_ATMPVC) with a statically
configured VPI/VCI. We can drop switched virtual circuits (SVCs)
and user-space signaling (atmsigd) support. While digging around
I noticed a few more obviously dead pieces of code.
Annoyingly, I have applied one "fix" to QoS config which will
now make net conflict with this series :/
====================
Jakub Kicinski [Mon, 15 Jun 2026 19:44:16 +0000 (12:44 -0700)]
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
ATM removals have left a number of uAPI headers and ioctl
definitions with no in-kernel implementation behind them:
- device headers for adapters deleted with the legacy PCI/SBUS drivers:
atm_eni.h, atm_he.h, atm_idt77105.h, atm_nicstar.h, atm_zatm.h and
the atmtcp pair atm_tcp.h / <linux/atm_tcp.h>
- protocol headers for the removed CLIP, LANE and MPOA stacks:
atmarp.h, atmclip.h, atmlec.h, atmmpc.h
- atmsvc.h and the SVC / p2mp / local-address ioctls in atmdev.h
(ATM_{GET,RST,ADD,DEL}ADDR, ATM_{ADD,DEL,GET}LECSADDR,
ATM_{ADD,DROP}PARTY) left behind by the SVC and address-registry
removals
None of these are referenced by any remaining in-tree code.
Let's try to delete all this. Chances are nobody cares about
these headers any more. I'm keeping this separate from the
kernel side code changes for ease of revert, in case I am
proven wrong...
Jakub Kicinski [Mon, 15 Jun 2026 19:44:15 +0000 (12:44 -0700)]
atm: remove unused ATM PHY operations
The PHY operations are vestiges of the SAR/framer split used by the
removed PCI/SBUS ATM adapters:
- atmdev_ops::phy_put / ::phy_get (register accessors) are never called
by the core and solos-pci only listed them as NULL
- struct atmphy_ops and atm_dev::phy have no users at all - nothing
assigns or dereferences them
Remove all of them. atm_dev::phy_data is kept: solos-pci repurposes it
to stash its per-port channel index.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:14 +0000 (12:44 -0700)]
atm: remove the unused pre_send and send_bh device operations
atmdev_ops::pre_send (a TX pre-processing hook) and ::send_bh (a
bottom-half capable send variant) have no implementation behind them:
no remaining ATM driver sets either, so vcc_sendmsg() always skipped
pre_send and the raw AAL0/AAL5 paths always fell back to ->send().
The drivers that used these hooks were removed with the legacy ATM
adapters.
Drop both operations and the dead branches that tested for them.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:13 +0000 (12:44 -0700)]
atm: remove the unused change_qos device operation
atmdev_ops::change_qos() was the hook for renegotiating the traffic
parameters of an already-connected VCC, driven from SO_ATMQOS on a
connected socket (and previously from the SVC as_modify path, now gone).
None of the ATM drivers left in tree implement it - solos-pci only listed
change_qos = NULL - so atm_change_qos() always returned -EOPNOTSUPP.
Drop the operation and return -EOPNOTSUPP directly.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:12 +0000 (12:44 -0700)]
atm: remove SVC socket support and the signaling daemon interface
ATM switched virtual circuits (SVCs) are set up and torn down by a
user-space signaling daemon (atmsigd) which the kernel talks to over
a dedicated "sigd" socket: the kernel marshals Q.2931-style requests
(as_connect, as_listen, as_accept, as_close, ...) to the daemon and
applies the results to PF_ATMSVC sockets. This is the machinery behind
classical SVC use and was the foundation for LANE / MPOA, all of which
have been removed.
DSL deployments do not use any of this. PPPoATM and BR2684 run over
permanent virtual circuits (PF_ATMPVC) with a statically configured
VPI/VCI; no atmsigd, no Q.2931. Neither remaining ATM driver
(solos-pci, the USB DSL modems) is reachable through the SVC path.
Remove the SVC socket family and the signaling interface:
- delete net/atm/svc.c, net/atm/signaling.c and signaling.h
- drop atmsvc_init()/atmsvc_exit() and the PF_ATMSVC registration and
module alias
- drop the ATMSIGD_CTRL ioctl (sigd_attach) and the /proc/net/atm/svc
file
- fold the SVC branch out of atm_change_qos(); all sockets are PVCs now
The obsolete ATM_SETSC ioctl stub is left in place (it already just
warns and returns 0), as is the struct atm_vcc SVC bookkeeping shared
with the queueing layer.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:11 +0000 (12:44 -0700)]
atm: remove the local ATM (NSAP) address registry
net/atm/addr.c maintained the per-device lists of local NSAP addresses
(dev->local) and ILMI-learned LECS addresses (dev->lecs). These exist
solely to serve SVC signaling: the lists are populated through the
ATM_{ADD,DEL,RST}ADDR / ATM_{ADD,DEL,GET}LECSADDR ioctls used by the
atmsigd / ILMI daemons, and consumed when registering addresses with the
signaling daemon. The LECS list belonged to LAN Emulation, which has
been removed.
With no SVC users in a DSL-only configuration these lists are always
empty, so drop the registry entirely:
- remove the ADDR/LECSADDR/RSTADDR ioctls
- drop the now-always-empty "atmaddress" sysfs attribute
- remove the dev->local / dev->lecs lists, structs and enums
- delete net/atm/addr.c and net/atm/addr.h
The device ESI ("MAC" address) and its ATM_{G,S}ETESI ioctls and
"address" sysfs attribute are retained - the USB DSL modems populate
the ESI.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:10 +0000 (12:44 -0700)]
atm: remove dead SONET PHY ioctls
The SONET_* ioctls are SONET/SDH PHY controls that atm_dev_ioctl() and
the compat path only ever forwarded to the driver's ->ioctl() handler.
The PHY drivers that implemented them (the S/UNI library and the framers
on the removed PCI/SBUS adapters) are gone, and neither surviving driver
services them: solos-pci has no ->ioctl, and usbatm handles only
ATM_QUERYLOOP. They now uniformly return an error regardless.
Drop the SONET compat passthrough and the SONET cases in atm_dev_ioctl(),
along with the now-unused linux/sonet.h includes. The SONET_* uAPI
definitions are untouched.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:09 +0000 (12:44 -0700)]
atm: remove the unused send_oam / push_oam callbacks
The atmdev_ops::send_oam device operation and the atm_vcc::push_oam
callback were the kernel's interface for raw F4/F5 OAM cell exchange.
Nothing assigns them a non-NULL value and nothing ever invokes them:
the core only ever initialises push_oam to NULL (in vcc_create() and the
AAL init helpers) and the Solos driver only lists send_oam = NULL for
documentation. The drivers that actually drove OAM through these hooks
were removed along with the legacy ATM adapters.
Jakub Kicinski [Mon, 15 Jun 2026 19:44:08 +0000 (12:44 -0700)]
atm: remove AAL3/4 transport support
AAL3/4 is an obsolete connection-oriented ATM adaptation layer that has
seen no real use since the SMDS-era hardware it was designed for (90s?).
We are only maintaining ATM support in-tree to keep PPPoATM running,
and PPPoATM runs over AAL5.
Drop the "raw" AAL3/4 transport (atm_init_aal34()) and the ATM_AAL34
cases in the connect and traffic-parameter paths. A vcc_connect() with
qos.aal == ATM_AAL34 now fails with -EPROTOTYPE.
projects / thirdparty / kernel / linux.git / log
