Junio C Hamano [Wed, 15 Dec 2021 17:39:49 +0000 (09:39 -0800)]
Merge branch 'ab/ci-updates'
Drop support for TravisCI and update test workflows at GitHub.
* ab/ci-updates:
CI: don't run "make test" twice in one job
CI: use "$runs_on_pool", not "$jobname" to select packages & config
CI: rename the "Linux32" job to lower-case "linux32"
CI: use shorter names that fit in UX tooltips
CI: remove Travis CI support
Junio C Hamano [Wed, 15 Dec 2021 17:39:48 +0000 (09:39 -0800)]
Merge branch 'hn/reflog-tests'
Prepare tests on ref API to help testing reftable backends.
* hn/reflog-tests:
refs/debug: trim trailing LF from reflog message
test-ref-store: tweaks to for-each-reflog-ent format
t1405: check for_each_reflog_ent_reverse() more thoroughly
test-ref-store: don't add newline to reflog message
show-branch: show reflog message
When the "git push" command is killed while the receiving end is
trying to report what happened to the ref update proposals, the
latter used to die, due to SIGPIPE. The code now ignores SIGPIPE
to increase our chances to run the post-receive hook after it
happens.
* rj/receive-pack-avoid-sigpipe-during-status-reporting:
receive-pack: ignore SIGPIPE while reporting status to client
Junio C Hamano [Wed, 15 Dec 2021 17:39:47 +0000 (09:39 -0800)]
Merge branch 'ab/run-command'
API clean-up.
* ab/run-command:
run-command API: remove "env" member, always use "env_array"
difftool: use "env_array" to simplify memory management
run-command API: remove "argv" member, always use "args"
run-command API users: use strvec_push(), not argv construction
run-command API users: use strvec_pushl(), not argv construction
run-command tests: use strvec_pushv(), not argv assignment
run-command API users: use strvec_pushv(), not argv assignment
upload-archive: use regular "struct child_process" pattern
worktree: stop being overly intimate with run_command() internals
Junio C Hamano [Wed, 15 Dec 2021 17:39:46 +0000 (09:39 -0800)]
Merge branch 'fs/test-prereq'
The test framework learns to list unsatisfied test prerequisites,
and optionally error out when prerequisites that are expected to be
satisfied are not.
* fs/test-prereq:
test-lib: make BAIL_OUT() work in tests and prereq
test-lib: introduce required prereq for test runs
test-lib: show missing prereq summary
Junio C Hamano [Wed, 15 Dec 2021 17:39:46 +0000 (09:39 -0800)]
Merge branch 'ab/mark-leak-free-tests-even-more'
More tests are marked as leak-free.
* ab/mark-leak-free-tests-even-more:
leak tests: mark some fast-import tests as passing with SANITIZE=leak
leak tests: mark some config tests as passing with SANITIZE=leak
leak tests: mark some status tests as passing with SANITIZE=leak
leak tests: mark some clone tests as passing with SANITIZE=leak
leak tests: mark some add tests as passing with SANITIZE=leak
leak tests: mark some diff tests as passing with SANITIZE=leak
leak tests: mark some apply tests as passing with SANITIZE=leak
leak tests: mark some notes tests as passing with SANITIZE=leak
leak tests: mark some update-index tests as passing with SANITIZE=leak
leak tests: mark some rev-parse tests as passing with SANITIZE=leak
leak tests: mark some rev-list tests as passing with SANITIZE=leak
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark most gettext tests as passing with SANITIZE=leak
leak tests: mark "sort" test as passing SANITIZE=leak
leak tests: mark a read-tree test as passing SANITIZE=leak
Junio C Hamano [Fri, 10 Dec 2021 22:35:16 +0000 (14:35 -0800)]
Merge branch 'cb/add-p-single-key-fix'
The single-key-input mode in "git add -p" had some code to handle
keys that generate a sequence of input via ReadKey(), which did not
handle end-of-file correctly, which has been fixed.
* cb/add-p-single-key-fix:
add -p: avoid use of undefined $key when ReadKey -> EOF
"git submodule deinit" for a submodule whose .git metadata
directory is embedded in its working tree refused to work, until
the submodule gets converted to use the "absorbed" form where the
metadata directory is stored in superproject, and a gitfile at the
top-level of the working tree of the submodule points at it. The
command is taught to convert such submodules to the absorbed form
as needed.
* mp/absorb-submodule-git-dir-upon-deinit:
submodule: absorb git dir instead of dying on deinit
Junio C Hamano [Fri, 10 Dec 2021 22:35:13 +0000 (14:35 -0800)]
Merge branch 'jk/t7006-sigpipe-tests-fix'
The function to cull a child process and determine the exit status
had two separate code paths for normal callers and callers in a
signal handler, and the latter did not yield correct value when the
child has caught a signal. The handling of the exit status has
been unified for these two code paths. An existing test with
flakiness has also been corrected.
* jk/t7006-sigpipe-tests-fix:
t7006: simplify exit-code checks for sigpipe tests
t7006: clean up SIGPIPE handling in trace2 tests
run-command: unify signal and regular logic for wait_or_whine()
"git fetch", when received a bad packfile, can fail with SIGPIPE.
This wasn't wrong per-se, but we now detect the situation and fail
in a more predictable way.
* jk/fetch-pack-avoid-sigpipe-to-index-pack:
fetch-pack: ignore SIGPIPE when writing to index-pack
Junio C Hamano [Fri, 10 Dec 2021 22:35:12 +0000 (14:35 -0800)]
Merge branch 'vd/sparse-reset'
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
Junio C Hamano [Fri, 10 Dec 2021 22:35:10 +0000 (14:35 -0800)]
Merge branch 'po/size-t-for-vs'
On platforms where ulong is shorter than size_t, code paths that
shifted 1 or 1U to the left lacked the necessary cast to size_t,
which have been corrected.
* po/size-t-for-vs:
object-file.c: LLP64 compatibility, upcast unity for left shift
diffcore-delta.c: LLP64 compatibility, upcast unity for left shift
repack.c: LLP64 compatibility, upcast unity for left shift
The advice message given by "git pull" when the user hasn't made a
choice between merge and rebase still said that the merge is the
default, which no longer is the case. This has been corrected.
* ah/advice-pull-has-no-preference-between-rebase-and-merge:
pull: don't say that merge is "the default strategy"
Junio C Hamano [Fri, 10 Dec 2021 22:35:08 +0000 (14:35 -0800)]
Merge branch 'ab/generate-command-list'
Build optimization.
* ab/generate-command-list:
generate-cmdlist.sh: don't parse command-list.txt thrice
generate-cmdlist.sh: replace "grep' invocation with a shell version
generate-cmdlist.sh: do not shell out to "sed"
generate-cmdlist.sh: stop sorting category lines
generate-cmdlist.sh: replace for loop by printf's auto-repeat feature
generate-cmdlist.sh: run "grep | sort", not "sort | grep"
generate-cmdlist.sh: don't call get_categories() from category_list()
generate-cmdlist.sh: spawn fewer processes
generate-cmdlist.sh: trivial whitespace change
command-list.txt: sort with "LC_ALL=C sort"
Junio C Hamano [Fri, 10 Dec 2021 22:35:03 +0000 (14:35 -0800)]
Merge branch 'ja/doc-cleanup'
Doc update.
* ja/doc-cleanup:
init doc: --shared=0xxx does not give umask but perm bits
doc: git-init: clarify file modes in octal.
doc: git-http-push: describe the refs as pattern pairs
doc: uniformize <URL> placeholders' case
doc: use three dots for indicating repetition instead of star
doc: git-ls-files: express options as optional alternatives
doc: use only hyphens as word separators in placeholders
doc: express grammar placeholders between angle brackets
doc: split placeholders as individual tokens
doc: fix git credential synopsis
Code clean-up to eventually allow information on remotes defined
for an arbitrary repository to be read.
* gc/remote-with-fewer-static-global-variables:
remote: die if branch is not found in repository
remote: remove the_repository->remote_state from static methods
remote: use remote_state parameter internally
remote: move static variables into per-repository struct
t5516: add test case for pushing remote refspecs
Junio C Hamano [Fri, 10 Dec 2021 22:35:01 +0000 (14:35 -0800)]
Merge branch 'vd/sparse-sparsity-fix-on-read'
Ensure that the sparseness of the in-core index matches the
index.sparse configuration specified by the repository immediately
after the on-disk index file is read.
* vd/sparse-sparsity-fix-on-read:
sparse-index: update do_read_index to ensure correct sparsity
sparse-index: add ensure_correct_sparsity function
sparse-index: avoid unnecessary cache tree clearing
test-read-cache.c: prepare_repo_settings after config init
test-ref-store: tweaks to for-each-reflog-ent format
We have some tests that read from files in .git/logs/ hierarchy
when checking if correct reflog entries are created, but that is
too specific to the files backend. Other backends like reftable
may not store its reflog entries in such a "one line per entry"
format.
Update for-each-reflog-ent test helper to produce output that
is identical to lines in a reflog file files backend uses.
That way, (1) the current tests can be updated to use the test
helper to read the reflog entries instead of (parts of) reflog
files, and perform the same inspection for correctness, and (2)
when the ref backend is swapped to another backend, the updated
test can be used as-is to check the correctness.
Adapt t1400 to use the for-each-reflog-ent test helper.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, --reflog option would look for '\t' in the reflog message. As refs.c
already parses the reflog line, the '\t' was never found, and show-branch
--reflog would always say "(none)" as reflog message
Add test.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fabian Stelzer [Wed, 1 Dec 2021 08:53:15 +0000 (09:53 +0100)]
test-lib: make BAIL_OUT() work in tests and prereq
BAIL_OUT() is meant to abort the whole test run and print a message with
a standard prefix that can be parsed to stdout. Since for every test the
normal fd`s are redirected in test_eval_ this output would not be seen
when used within the context of a test or prereq like we do in
test_have_prereq(). To make this function work in these contexts we move
the setup of the fd aliases a few lines up before the first use of
BAIL_OUT() and then have this function always print to the alias.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util: add a test balloon for C99 support
The C99 standard was released in January 1999, now 22 years ago. It
provides a variety of useful features, including variadic arguments for
macros, declarations after statements, designated initializers, and a
wide variety of other useful features, many of which we already use.
We'd like to take advantage of these features, but we want to be
cautious. As far as we know, all major compilers now support C99 or a
later C standard, such as C11 or C17. POSIX has required C99 support as
a requirement for the 2001 revision, so we can safely assume any POSIX
system which we are interested in supporting has C99.
Even MSVC, long a holdout against modern C, now supports both C11 and
C17 with an appropriate update. Moreover, even if people are using an
older version of MSVC on these systems, they will generally need some
implementation of the standard Unix utilities for the testsuite, and GNU
coreutils, the most common option, has required C99 since 2009.
Therefore, we can safely assume that a suitable version of GCC or clang
is available to users even if their version of MSVC is not sufficiently
capable.
Let's add a test balloon to git-compat-util.h to see if anyone is using
an older compiler. We'll add a comment telling people how to enable
this functionality on GCC and Clang, even though modern versions of both
will automatically do the right thing, and ask people still experiencing
a problem to report that to us on the list.
Note that C89 compilers don't provide the __STDC_VERSION__ macro, so we
use a well-known hack of using "- 0". On compilers with this macro, it
doesn't change the value, and on C89 compilers, the macro will be
replaced with nothing, and our value will be 0.
For sparse, we explicitly request the gnu99 style because we've
traditionally taken advantage of some GCC- and clang-specific extensions
when available and we'd like to retain the ability to do that. sparse
also defaults to C89 without it, so things will fail for us if we don't.
Update the cmake configuration to require C11 for MSVC. We do this
because this will make MSVC to use C11, since it does not explicitly
support C99. We do this with a compiler options because setting the
C_STANDARD option does not work in our CI on MSVC and at the moment, we
don't want to require C11 for Unix compilers.
In the Makefile, don't set any compiler flags for the compiler itself,
since on some systems, such as FreeBSD, we actually need C11, and asking
for C99 causes things to fail to compile. The error message should make
it obvious what's going wrong and allow a user to set the appropriate
option when building in the event they're using a Unix compiler that
doesn't support it by default.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 1 Dec 2021 00:05:06 +0000 (00:05 +0000)]
xdiff: implement a zealous diff3, or "zdiff3"
"zdiff3" is identical to ordinary diff3 except that it allows compaction
of common lines on the two sides of history at the beginning or end of
the conflict hunk. For example, the following diff3 conflict:
1
2
3
4
<<<<<<
A
B
C
D
E
||||||
5
6
======
A
X
C
Y
E
>>>>>>
7
8
9
has common lines 'A', 'C', and 'E' on the two sides. With zdiff3, one
would instead get the following conflict:
1
2
3
4
A
<<<<<<
B
C
D
||||||
5
6
======
X
C
Y
>>>>>>
E
7
8
9
Note that the common lines, 'A', and 'E' were moved outside the
conflict. Unlike with the two-way conflicts from the 'merge'
conflictStyle, the zdiff3 conflict is NOT split into multiple conflict
regions to allow the common 'C' lines to be shown outside a conflict,
because zdiff3 shows the base version too and the base version cannot be
reasonably split.
Note also that the removing of lines common to the two sides might make
the remaining text inside the conflict region match the base text inside
the conflict region (for example, if the diff3 conflict had '5 6 E' on
the right side of the conflict, then the common line 'E' would be moved
outside and both the base and right side's remaining conflict text would
be the lines '5' and '6'). This has the potential to surprise users and
make them think there should not have been a conflict, but there
definitely was a conflict and it should remain.
Elijah Newren [Tue, 30 Nov 2021 03:58:39 +0000 (03:58 +0000)]
sequencer: avoid adding exec commands for non-commit creating commands
The `--exec <cmd>` is documented as
Append "exec <cmd>" after each line creating a commit in the final
history.
...
If --autosquash is used, "exec" lines will not be appended for the
intermediate commits, and will only appear at the end of each
squash/fixup series.
Unfortunately, it would also add exec commands after non-pick
operations, such as 'no-op', which could be seen for example with
git rebase -i --exec true HEAD
todo_list_add_exec_commands() intent was to insert exec commands after
each logical pick, while trying to consider a chains of fixup and squash
commits to be part of the pick before it. So it would keep an 'insert'
boolean tracking if it had seen a pick or merge, but not write the exec
command until it saw the next non-fixup/squash command. Since that
would make it miss the final exec command, it had some code that would
check whether it still needed to insert one at the end, but instead of a
simple
if (insert)
it had a
if (insert || <condition that is always true>)
That's buggy; as per the docs, we should only add exec commands for
lines that create commits, i.e. only if insert is true. Fix the
conditional.
There was one testcase in the testsuite that we tweak for this change;
it was introduced in 54fd3243da ("rebase -i: reread the todo list if
`exec` touched it", 2017-04-26), and was merely testing that after an
exec had fired that the todo list would be re-read. The test at the
time would have worked given any revision at all, though it would only
work with 'HEAD' as a side-effect of this bug. Since we're fixing this
bug, choose something other than 'HEAD' for that test.
Finally, add a testcase that verifies when we have no commits to pick,
that we get no exec lines in the generated todo list.
Reported-by: Nikita Bobko <nikitabobko@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Acked-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 29 Nov 2021 23:41:51 +0000 (15:41 -0800)]
Merge branch 'mc/clean-smudge-with-llp64'
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
Junio C Hamano [Mon, 29 Nov 2021 23:41:48 +0000 (15:41 -0800)]
Merge branch 'jc/unsetenv-returns-an-int'
The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
Junio C Hamano [Mon, 29 Nov 2021 23:41:47 +0000 (15:41 -0800)]
Merge branch 'jc/fix-ref-sorting-parse'
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
Junio C Hamano [Mon, 29 Nov 2021 23:41:45 +0000 (15:41 -0800)]
Merge branch 'ab/refs-errno-cleanup'
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
Han-Wen Nienhuys [Mon, 29 Nov 2021 18:20:22 +0000 (18:20 +0000)]
t1404: mark directory/file conflict tests with REFFILES
The files backend uses file system locking on individual refs, which means a
directory/file conflict can prevent locks being taken. For example, in a repo
with just the ref "foo", an update
(DELETE "foo") + (ADD "foo/bar")
cannot be executed in the files backend, as one cannot take a lock on foo/bar.
The current reftable proof-of-concept integration supports these tranactions, as
the result is a repo with just "foo/bar", which has no directory/file conflict.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:43 +0000 (15:52 +0000)]
unpack-trees: improve performance of next_cache_entry
To find the first non-unpacked cache entry, `next_cache_entry` iterates
through index, starting at `cache_bottom`. The performance of this in full
indexes is helped by `cache_bottom` advancing with each invocation of
`mark_ce_used` (called by `unpack_index_entry`). However, the presence of
sparse directories can prevent the `cache_bottom` from advancing in a sparse
index case, effectively forcing `next_cache_entry` to search from the
beginning of the index each time it is called.
The `cache_bottom` must be preserved for the sparse index (see 17a1bb570b
(unpack-trees: preserve cache_bottom, 2021-07-14)). Therefore, to retain the
benefit `cache_bottom` provides in non-sparse index cases, a separate `hint`
position indicates the first position `next_cache_entry` should search,
updated each execution with a new position.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:42 +0000 (15:52 +0000)]
reset: make --mixed sparse-aware
Remove the `ensure_full_index` guard on `read_from_tree` and update `git
reset --mixed` to ensure it can use sparse directory index entries wherever
possible. Sparse directory entries are reset using `diff_tree_oid`, which
requires `change` and `add_remove` functions to process the internal
contents of the sparse directory. The `recursive` diff option handles cases
in which `reset --mixed` must diff/merge files that are nested multiple
levels deep in a sparse directory.
The use of pathspecs with `git reset --mixed` introduces scenarios in which
internal contents of sparse directories may be matched by the pathspec. In
order to reset *all* files in the repo that may match the pathspec, the
following conditions on the pathspec require index expansion before
performing the reset:
* "magic" pathspecs
* wildcard pathspecs that do not match only in-cone files or entire sparse
directories
* literal pathspecs matching something outside the sparse checkout
definition
Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:41 +0000 (15:52 +0000)]
reset: make sparse-aware (except --mixed)
Remove `ensure_full_index` guard on `prime_cache_tree` and update
`prime_cache_tree_rec` to correctly reconstruct sparse directory entries in
the cache tree. While processing a tree's entries, `prime_cache_tree_rec`
must determine whether a directory entry is sparse or not by searching for
it in the index (*without* expanding the index). If a matching sparse
directory index entry is found, no subtrees are added to the cache tree
entry and the entry count is set to 1 (representing the sparse directory
itself). Otherwise, the tree is assumed to not be sparse and its subtrees
are recursively added to the cache tree.
Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:40 +0000 (15:52 +0000)]
reset: integrate with sparse index
Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:39 +0000 (15:52 +0000)]
reset: expand test coverage for sparse checkouts
Add new tests for `--merge` and `--keep` modes, as well as mixed reset with
pathspecs. New performance test cases exercise various execution paths for
`reset`.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 29 Nov 2021 13:47:46 +0000 (13:47 +0000)]
t/t*: remove custom GIT_TRACE2_EVENT_NESTING
The previous change modified GIT_TRACE2_EVENT_NESTING by default within
test-lib.sh. These custom assignments throughout the test suite are no
longer necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 29 Nov 2021 13:47:45 +0000 (13:47 +0000)]
test-lib.sh: set GIT_TRACE2_EVENT_NESTING
The GIT_TRACE2_EVENT feed has a limited nesting depth to avoid
overloading the feed when recursing into deep paths while adding more
nested regions.
Some tests use the GIT_TRACE2_EVENT feed to look for internal events,
ensuring that intended behavior is happening.
One such example is in t4216-log-bloom.sh which looks for a statistic
given as a trace2_data_intmax() call. This test started failing under
'-x' with 2ca245f8be5 (csum-file.h: increase hashfile buffer size,
2021-05-18) because the change in stderr triggered the progress API to
create an extra trace2 region, ejecting the statistic.
This change increases the value of GIT_TRACE2_EVENT_NESTING across the
entire test suite to avoid errors like this. Future changes will remove
custom assignments of GIT_TRACE2_EVENT_NESTING from some test scripts
that were aware of this limitation.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add -p: avoid use of undefined $key when ReadKey -> EOF
b5cc003253 (add -i: ignore terminal escape sequences, 2011-05-17)
add an additional check to the original code to better handle keys
for escape sequences, but failed to account for the possibility
the first ReadKey call returned undef (ex: stdin closes) and that
was being handled fine by the original code in ca6ac7f135 (add -p:
prompt for single characters, 2009-02-05)
Add a test for undefined and encapsulate the loop and the original
print that relied on it within it.
After this, the following command (in a suitable repository state)
wouldn't print any error:
$ git -c interactive.singleKey add -p </dev/null
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw-w64's pthread_unistd.h had a bug that mistakenly (because there is
no support for the *lockfile() functions required[1]) defined
_POSIX_THREAD_SAFE_FUNCTIONS and that was being worked around since 3ecd153a3b (compat/mingw: support MSys2-based MinGW build, 2016-01-14).
The bug was fixed in winphtreads, but as a side effect, leaves the
reentrant functions from time.h no longer visible and therefore breaks
the build.
Since the intention all along was to avoid using the fallback functions,
formalize the use of POSIX by setting the corresponding feature flag and
compile out the implementation for the fallback functions.
[1] https://unix.org/whitepapers/reentrant.html
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command API: remove "env" member, always use "env_array"
Remove the "env" member from "struct child_process" in favor of always
using the "env_array". As with the preceding removal of "argv" in
favor of "args" this gets rid of current and future oddities around
memory management at the API boundary (see the amended API docs).
For some of the conversions we can replace patterns like:
child.env = env->v;
With:
strvec_pushv(&child.env_array, env->v);
But for others we need to guard the strvec_pushv() with a NULL check,
since we're not passing in the "v" member of a "struct strvec",
e.g. in the case of tmp_objdir_env()'s return value.
Ideally we'd rename the "env_array" member to simply "env" as a
follow-up, since it and "args" are now inconsistent in not having an
"_array" suffix, and seemingly without any good reason, unless we look
at the history of how they came to be.
But as we've currently got 122 in-tree hits for a "git grep env_array"
let's leave that for now (and possibly forever). Doing that rename
would be too disruptive.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: use "env_array" to simplify memory management
Amend code added in 03831ef7b50 (difftool: implement the functionality
in the builtin, 2017-01-19) to use the "env_array" in the
run_command.[ch] API. Now we no longer need to manage our own
"index_env" buffer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command API: remove "argv" member, always use "args"
Remove the "argv" member from the run-command API, ever since "args"
was added in c460c0ecdca (run-command: store an optional argv_array,
2014-05-15) being able to provide either "argv" or "args" has led to
some confusion and bugs.
If we hadn't gone in that direction and only had an "argv" our
problems wouldn't have been solved either, as noted in [1] (and in the
documentation amended here) it comes with inherent memory management
issues: The caller would have to hang on to the "argv" until the
run-command API was finished. If the "argv" was an argument to main()
this wasn't an issue, but if it it was manually constructed using the
API might be painful.
We also have a recent report[2] of a user of the API segfaulting,
which is a direct result of it being complex to use. This commit
addresses the root cause of that bug.
This change is larger than I'd like, but there's no easy way to avoid
it that wouldn't involve even more verbose intermediate steps. We use
the "argv" as the source of truth over the "args", so we need to
change all parts of run-command.[ch] itself, as well as the trace2
logging at the same time.
The resulting Windows-specific code in start_command() is a bit nasty,
as we're now assigning to a strvec's "v" member, instead of to our own
"argv". There was a suggestion of some alternate approaches in reply
to an earlier version of this commit[3], but let's leave larger a
larger and needless refactoring of this code for now.
run-command API users: use strvec_push(), not argv construction
Change a pattern of hardcoding an "argv" array size, populating it and
assigning to the "argv" member of "struct child_process" to instead
use "strvec_push()" to add data to the "args" member.
As noted in the preceding commit this moves us further towards being
able to remove the "argv" member in a subsequent commit
These callers could have used strvec_pushl(), but moving to
strvec_push() makes the diff easier to read, and keeps the arguments
aligned as before.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command API users: use strvec_pushl(), not argv construction
Change a pattern of hardcoding an "argv" array size, populating it and
assigning to the "argv" member of "struct child_process" to instead
use "strvec_pushl()" to add data to the "args" member.
This implements the same behavior as before in fewer lines of code,
and moves us further towards being able to remove the "argv" member in
a subsequent commit.
Since we've entirely removed the "argv" variable(s) we can be sure
that no potential logic errors of the type discussed in a preceding
commit are being introduced here, i.e. ones where the local "argv" was
being modified after the assignment to "struct child_process"'s
"argv".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command tests: use strvec_pushv(), not argv assignment
As in the preceding commit change this API user to use strvec_pushv()
instead of assigning to the "argv" member directly. This leaves us
without test coverage of how the "argv" assignment in this API works,
but we'll be removing it in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command API users: use strvec_pushv(), not argv assignment
Migrate those run-command API users that assign directly to the "argv"
member to use a strvec_pushv() of "args" instead.
In these cases it did not make sense to further refactor these
callers, e.g. daemon.c could be made to construct the arguments closer
to handle(), but that would require moving the construction from its
cmd_main() and pass "argv" through two intermediate functions.
It would be possible for a change like this to introduce a regression
if we were doing:
cp.argv = argv;
argv[1] = "foo";
And changed the code, as is being done here, to:
strvec_pushv(&cp.args, argv);
argv[1] = "foo";
But as viewing this change with the "-W" flag reveals none of these
functions modify variable that's being pushed afterwards in a way that
would introduce such a logic error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-archive: use regular "struct child_process" pattern
This pattern added [1] in seems to have been intentional, but since
[2] and [3] we've wanted do initialization of what's now the "struct
strvec" "args" and "env_array" members. Let's not trample on that
initialization here.
1. 1bc01efed17 (upload-archive: use start_command instead of fork,
2011-11-19)
2. c460c0ecdca (run-command: store an optional argv_array, 2014-05-15)
3. 9a583dc39e (run-command: add env_array, an optional argv_array for
env, 2014-10-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Thu, 25 Nov 2021 22:52:16 +0000 (23:52 +0100)]
worktree: stop being overly intimate with run_command() internals
add_worktree() reuses a `child_process` for three run_command()
invocations, but to do so, it has overly-intimate knowledge of
run-command.c internals. In particular, it knows that it must reset
child_process::argv to NULL for each subsequent invocation[*] in order
for start_command() to latch the newly-populated child_process::args for
each invocation, even though this behavior is not a part of the
documented API. Beyond having overly-intimate knowledge of run-command.c
internals, the reuse of one `child_process` for three run_command()
invocations smells like an unnecessary micro-optimization. Therefore,
stop sharing one `child_process` and instead use a new one for each
run_command() call.
[*] If child_process::argv is not reset to NULL, then subsequent
run_command() invocations will instead incorrectly access a dangling
pointer to freed memory which had been allocated by child_process::args
on the previous run. This is due to the following code in
start_command():
if (!cmd->argv)
cmd->argv = cmd->args.v;
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Yoichi Nakayama <yoichi.nakayama@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:33 +0000 (00:20 +0000)]
sparse-index: update do_read_index to ensure correct sparsity
Unless `command_requires_full_index` forces index expansion, ensure in-core
index sparsity matches config settings on read by calling
`ensure_correct_sparsity`. This makes the behavior of the in-core index more
consistent between different methods of updating sparsity: manually changing
the `index.sparse` config setting vs. executing
`git sparse-checkout --[no-]sparse-index init`
Although index sparsity is normally updated with `git sparse-checkout init`,
ensuring correct sparsity after a manual `index.sparse` change has some
practical benefits:
1. It allows for command-by-command sparsity toggling with
`-c index.sparse=<true|false>`, e.g. when troubleshooting issues with the
sparse index.
2. It prevents users from experiencing abnormal slowness after setting
`index.sparse` to `true` due to use of a full index in all commands until
the on-disk index is updated.
Helped-by: Junio C Hamano <gitster@pobox.com> Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:32 +0000 (00:20 +0000)]
sparse-index: add ensure_correct_sparsity function
The `ensure_correct_sparsity` function is intended to provide a means of
aligning the in-core index with the sparsity required by the repository
settings and other properties of the index. The function first checks
whether a sparse index is allowed (per repository & sparse checkout pattern
settings). If the sparse index may be used, the index is converted to
sparse; otherwise, it is explicitly expanded with `ensure_full_index`.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:31 +0000 (00:20 +0000)]
sparse-index: avoid unnecessary cache tree clearing
When converting a full index to sparse, clear and recreate the cache tree
only if the cache tree is not fully valid. The convert_to_sparse operation
should exit silently if a cache tree update cannot be successfully completed
(e.g., due to a conflicted entry state). However, because this failure
scenario only occurs when at least a portion of the cache tree is invalid,
we can save ourselves the cost of clearing and recreating the cache tree by
skipping the check when the cache tree is fully valid.
Helped-by: Derrick Stolee <dstolee@microsoft.com> Co-authored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:30 +0000 (00:20 +0000)]
test-read-cache.c: prepare_repo_settings after config init
Move `prepare_repo_settings` after the git directory has been set up in
`test-read-cache.c`. The git directory settings must be initialized to
properly assign repo settings using the worktree-level git config.
Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enzo Matsumiya [Thu, 25 Nov 2021 00:02:39 +0000 (21:02 -0300)]
pager: fix crash when pager program doesn't exist
When prepare_cmd() fails for, e.g., pager process setup,
child_process_clear() frees the memory in pager_process.args, but .argv
was pointed to pager_process.args.v earlier in start_command(), so it's
now a dangling pointer.
setup_pager() is then called a second time, from cmd_log_init_finish()
in this case, and any further operations using its .argv, e.g. strvec_*,
will use the dangling pointer and eventually crash. According to trivial
tests, setup_pager() is not called twice if the first call is
successful.
This patch makes sure that pager_process is properly initialized on
setup_pager(). Drop CHILD_PROCESS_INIT from its declaration since it's
no longer really necessary.
Add a test to catch possible regressions.
Reproducer:
$ git config pager.show INVALID_PAGER
$ git show $VALID_COMMIT
error: cannot run INVALID_PAGER: No such file or directory
[1] 3619 segmentation fault (core dumped) git show $VALID_COMMIT
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "linux-clang" and "linux-gcc" jobs both run "make test" twice, but
with different environment variables. Running these in sequence seems
to have been done to work around some constraint on Travis, see ae59a4e44f3 (travis: run tests with GIT_TEST_SPLIT_INDEX, 2018-01-07).
By having these run in parallel we'll get jobs that finish much sooner
than they otherwise would have.
We can also simplify the control flow in "ci/run-build-and-tests.sh"
as a result, since we won't run "make test" twice we don't need to run
"make" twice at all, let's default to "make all test" after setting
the variables, and then override it to just "all" for the compile-only
tests.
Add a comment to clarify that new "test" targets should adjust
$MAKE_TARGETS rather than being added after the "case/esac". This
should avoid future confusion where e.g. the compilation-only
"pedantic" target will unexpectedly start running tests. See [1] and
[2].
CI: use "$runs_on_pool", not "$jobname" to select packages & config
Change the setup hooks for the CI to use "$runs_on_pool" for the
"$regular" job. Now we won't need as much boilerplate when adding new
jobs to the "regular" matrix, see 956d2e4639b (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for the last such commit.
I.e. now instead of needing to enumerate each jobname when we select
packages we can install things depending on the pool we're running
in.
That we didn't do this dates back to the now gone dependency on Travis
CI, but even if we add a new CI target in the future this'll be easier
to port over, since we can probably treat "ubuntu-latest" as a
stand-in for some recent Linux that can run "apt" commands.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
