Some ublk selftests have strange behavior when fio is not installed.
While most tests behave correctly (run if they don't need fio, or skip
if they need fio), the following tests have different behavior:
- test_null_01, test_null_02, test_generic_01, test_generic_02, and
test_generic_12 try to run fio without checking if it exists first,
and fail on any failure of the fio command (including "fio command
not found"). So these tests fail when they should skip.
- test_stress_05 runs fio without checking if it exists first, but
doesn't fail on fio command failure. This test passes, but that pass
is misleading as the test doesn't do anything useful without fio
installed. So this test passes when it should skip.
Fix these issues by adding _have_program fio checks to the top of all of
these tests.
Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The main reason is that 'r8' in insn '70' is not an arena pointer.
Further debugging at llvm side shows that llvm commit ([1]) caused
the failure. For the original code:
page[i] = NULL;
page[i + 1] = NULL;
the llvm transformed it to something like below at source level:
__builtin_memset(&page[i], 0, 16)
Such transformation prevents llvm BPFCheckAndAdjustIR pass from
generating proper addr_space_cast insns ([2]).
Adding support in llvm BPFCheckAndAdjustIR pass should work, but
not sure that such a pattern exists or not in real applications.
At the same time, simply adding a memory barrier between two 'page'
assignment can fix the issue.
sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()
to check if the calling task is allowed to access another task's
robust_list pointer. This check is racy against a concurrent exec() in the
target process.
During exec(), a task may transition from a non-privileged binary to a
privileged one (e.g., setuid binary) and its credentials/memory mappings
may change. If get_robust_list() performs ptrace_may_access() before
this transition, it may erroneously allow access to sensitive information
after the target becomes privileged.
A racy access allows an attacker to exploit a window during which
ptrace_may_access() passes before a target process transitions to a
privileged state via exec().
For example, consider a non-privileged task T that is about to execute a
setuid-root binary. An attacker task A calls get_robust_list(T) while T
is still unprivileged. Since ptrace_may_access() checks permissions
based on current credentials, it succeeds. However, if T begins exec
immediately afterwards, it becomes privileged and may change its memory
mappings. Because get_robust_list() proceeds to access T->robust_list
without synchronizing with exec() it may read user-space pointers from a
now-privileged process.
This violates the intended post-exec access restrictions and could
expose sensitive memory addresses or be used as a primitive in a larger
exploit chain. Consequently, the race can lead to unauthorized
disclosure of information across privilege boundaries and poses a
potential security risk.
Take a read lock on signal->exec_update_lock prior to invoking
ptrace_may_access() and accessing the robust_list/compat_robust_list.
This ensures that the target task's exec state remains stable during the
check, allowing for consistent and synchronized validation of
credentials.
Refuse to register a cpuidle device if the given CPU has a cpuidle
device already and print a message regarding it.
Without this, an attempt to register a new cpuidle device without
unregistering the existing one leads to the removal of the existing
cpuidle device without removing its sysfs interface.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
71 | info.func_info = ptr_to_u64(&finfo);
| ^~~~~
prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2294 | info.func_info = ptr_to_u64(&func_info);
|
The X1E80100 battery management firmware sends a notification with
code 0x83 when the battery charging state changes, such as switching
between fast charge, taper charge, end of charge, or any other error
charging states.
The same notification code is used with bit[8] set when charging stops
because the charge control end threshold is reached. Additionally,
a 2-bit value is included in bit[10:9] with the same code to indicate
the charging source capability, which is determined by the calculated
power from voltage and current readings from PDOs: 2 means a strong
charger over 60W, 1 indicates a weak charger, and 0 means there is no
charging source.
These 3-MSB [10:8] in the notification code is not much useful for now,
hence just ignore them and trigger a power supply change event whenever
0x83 notification code is received. This helps to eliminate the unknown
notification error messages.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com> Closes: https://lore.kernel.org/all/r65idyc4of5obo6untebw4iqfj2zteiggnnzabrqtlcinvtddx@xc4aig5abesu/ Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
The cpupower_write_sysfs() function currently returns -1 on
write failure, but the function signature indicates it should
return an unsigned int. Returning -1 from an unsigned function
results in a large positive value rather than indicating
an error condition.
Fix this by returning 0 on failure, which is more appropriate
for an unsigned return type and maintains consistency with typical
success/failure semantics where 0 indicates failure and non-zero
indicates success (bytes written).
The `kunit_test` proc macro only checks for the `test` attribute
immediately preceding a `fn`. If the function is disabled via a `cfg`,
the generated code would result in a compile error referencing a
non-existent function [1].
This collects attributes and specifically cherry-picks `cfg` attributes
to be duplicated inside KUnit wrapper functions such that a test function
disabled via `cfg` compiles and is marked as skipped in KUnit correctly.
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
For systems having CONFIG_NR_CPUS set to > 1024 in kernel config
the selftest fails as arena_spin_lock_irqsave() returns EOPNOTSUPP.
(eg - incase of powerpc default value for CONFIG_NR_CPUS is 8192)
The selftest is skipped incase bpf program returns EOPNOTSUPP,
with a descriptive message logged.
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a7b ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/u4ttvhnn7lark5w3sgrbuy2rxupcvosp4qmvj46nwzgeo5ausc@uyrkdls2muwx Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/rsdinhafrtlguauhesmrrzkybpnvwantwmyfq2ih5aregghax5@mhr7v3eryci3/ Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A TEE driver doesn't always need to provide a pool if it doesn't
support memory sharing ioctls and can allocate memory for TEE
messages in another way. Although this is mentioned in the
documentation for tee_device_alloc(), it is not handled correctly.
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: https://github.com/acpica/acpica/commit/53fc0220 Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
IO time is considered busy by default for modern Intel processors. The
current check covers recent Family 6 models but excludes the brand new
Families 18 and 19.
According to Arjan van de Ven, the model check was mainly due to a lack
of testing on systems before INTEL_CORE2_MEROM. He suggests considering
all Intel processors as having an efficient idle.
Extend the IO busy classification to all Intel processors starting with
Family 6, including Family 15 (Pentium 4s) and upcoming Families 18/19.
Use an x86 VFM check and move the function to the header file to avoid
using arch-specific #ifdefs in the C file.
On certain Loongson platforms, drivers attempting to request a legacy
ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The
virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.
This issue does not affect ACPI-enumerated devices described in DSDT,
as their interrupts are properly mapped via the GSI translation path.
This indicates the LPC irqdomain itself is functional but is not correctly
handling direct VIRQ-to-HWIRQ mappings.
The root cause is the use of irq_domain_create_linear(). This API sets
up a domain for dynamic, on-demand mapping, typically triggered by a GSI
request. It does not pre-populate the mappings for the legacy VIRQ range
(0-15). Consequently, if no ACPI device claims a specific GSI
(e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to
the LPC domain. A direct call to request_irq(4, ...) then fails because
the kernel cannot resolve this VIRQ to a hardware interrupt managed by
the LPC controller.
The PCH-LPC interrupt controller is an i8259-compatible legacy device
that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to
support legacy drivers.
Fix this by replacing irq_domain_create_linear() with
irq_domain_create_legacy(). This API is specifically designed for such
controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ
mapping for the entire legacy range (0-15) immediately upon domain
creation. This ensures that any VIRQ in this range is always resolvable,
making direct calls to request_irq() for legacy IRQs function correctly.
Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
We're already iterating every segment, so check these for a valid IO
lengths at the same time. Individual segment lengths will not be checked
on passthrough commands. The read/write command segments must be sized
to the dma alignment.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
io_ring_ctx's enabled with IORING_SETUP_SINGLE_ISSUER are only allowed
a single task submitting to the ctx. Although the documentation only
mentions this restriction applying to io_uring_enter() syscalls,
commit d7cce96c449e ("io_uring: limit registration w/ SINGLE_ISSUER")
extends it to io_uring_register(). Ensuring only one task interacts
with the io_ring_ctx will be important to allow this task to avoid
taking the uring_lock.
There is, however, one gap in these checks: io_register_clone_buffers()
may take the uring_lock on a second (source) io_ring_ctx, but
__io_uring_register() only checks the current thread against the
*destination* io_ring_ctx's submitter_task. Fail the
IORING_REGISTER_CLONE_BUFFERS with -EEXIST if the source io_ring_ctx has
a registered submitter_task other than the current task.
This is mainly because the "name" field of power_supply_desc is a constant.
This patch fixes the issue by reusing the same approach as sbs-battery.
With this patch, the result is:
[ 7.819532] sbs-charger 18-0009: ltc4100: smart charger device registered
[ 7.825305] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[ 7.887423] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[ 7.893501] sbs-charger 20-0009: ltc4100: smart charger device registered
Unlike all the other allocations in this driver, the memory for storing
the pin function descriptions allocated with kcalloc() and later resized
with krealloc() is never freed. Use devres like elsewhere to handle
that. While at it - replace krealloc() with more suitable
devm_krealloc_array().
Note: the logic in this module is pretty convoluted and could probably
use some revisiting, we should probably be able to calculate the exact
amount of memory needed in advance or even skip the allocation
altogether and just add each function to the radix tree separately.
Renesas RZ/G3E supports a power-saving mode where power to most of the
SoC components is lost, including the PIN controller. Save and restore
the Schmitt control register contents to ensure the functionality is
preserved after a suspend/resume cycle.
Many AMD CPUs can support this feature now. We would get a wrong CPU DIE
temperature if don't consider this. In low-temperature environments,
the CPU die temperature can drop below zero. So many platforms would like
to make extended temperature range as their default configuration.
Default temperature range (0C to 255.875C).
Extended temperature range (-49C to +206.875C).
Ref Doc: AMD V3000 PPR (Doc ID #56558).
This fixes differences for the P8 system that was initially set to
the same thermal values as the P7, also adds in the PSU sensor for
all of the supported systems
Signed-off-by: David Ober <dober@lenovo.com> Signed-off-by: David Ober <dober6023@gmail.com> Link: https://lore.kernel.org/r/20250807103228.10465-1-dober6023@gmail.com
[groeck: Update subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The device ID of Strix Halo Data Fabric Function 3 has been in the tree
since commit 0e640f0a47d8 ("x86/amd_nb: Add new PCI IDs for AMD family
0x1a"), but is somehow missing from k10temp_id_table.
Add it so that it works out of the box.
Tested on Beelink GTR9 Pro Mini PC.
Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The workload hint may contain some other hints which are not defined.
So mask out unsupported types. Currently only lower 4 bits of workload
type hints are defined.
The current behavior of the Step-wise thermal governor is to increase
the cooling level one step at a time after trip point threshold passing
by thermal zone temperature until the temperature stops to rise. Then,
nothing is done until the temperature decreases below the (possibly
updated) trip point threshold, at which point the cooling level is
reduced straight to the applicable minimum.
While this generally works, it is not in agreement with the throttling
logic description comment in step_wise_manage() any more after some
relatively recent changes, and in the case of passive cooling, it may
lead to undesirable performance oscillations between high and low
levels.
For this reason, modify the governor's cooling device state selection
function, get_target_state(), to reduce cooling by one level even if
the temperature is still above the thermal zone threshold, but the
temperature has started to fall down. However, ensure that the cooling
level will remain above the applicable minimum in that case to pull
the zone temperature further down, possibly until it falls below the
trip threshold (which may now be equal to the low temperature of the
trip).
Doing so should help higher performance to be restored earlier in some
cases which is desirable especially for passive trip points with
relatively high hysteresis values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/1947735.tdWV9SEqCh@rafael.j.wysocki
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some x86/ACPI laptops with MIPI cameras have a INTC10DE or INTC10E0 ACPI
device in the _DEP dependency list of the ACPI devices for the camera-
sensors (which have flags.honor_deps set).
These devices are for an Intel Vision CVS chip for which an out of tree
driver is available [1].
The camera sensor works fine without a driver being loaded for this
ACPI device on the 2 laptops this was tested on:
ThinkPad X1 Carbon Gen 12 (Meteor Lake)
ThinkPad X1 2-in-1 Gen 10 (Arrow Lake)
For now add these HIDs to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met and an i2c_client for the camera sensor will get
instantiated.
Just like the other Vivobooks here, the N6506CU has its keyboard IRQ
described as ActiveLow in the DSDT, which the kernel overrides to
EdgeHigh, causing the internal keyboard not to work.
Add the N6506CU to the irq1_level_low_skip_override[] quirk table to fix
this.
If handler_address or mapped VA is NULL, the related buffer address and
VA can be ignored, so make acpi_parse_prmt() skip the current handler
in those cases.
The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the
low-order bits of the MSI Message DATA register to encode nr_irqs interrupt
numbers in the log2(nr_irqs) bits for the domain.
The problem arises if the base vector (GICV2m base spi) is not aligned with
nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base
vector conflict with the nr_irqs masking, causing the wrong MSI interrupt
to be identified.
To fix this, use bitmap_find_next_zero_area_off() instead of
bitmap_find_free_region() to align the initial base vector with nr_irqs.
Currently, even if some subtests fails, the end result will still yield
"ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are
any failures.
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
For arc architecture with CONFIG_ISA_ARCV2=y, the __fls() function
uses __builtin_arc_fls() which lacks GCC's const attribute, preventing
compile-time constant folding, and KUnit testing of ffs/fls fails on
arc[3]. A patch[2] to GCC to solve this has been sent.
Add a fix for this by handling compile-time constants with the standard
__builtin_clzl() builtin (which has const attribute) while preserving
the optimized arc-specific builtin for runtime cases. This has the added
benefit of skipping runtime calculation of compile-time constant values.
Even with the GCC bug fixed (which is about "attribute const") this is a
good change to avoid needless runtime costs, and should be done
regardless of the state of GCC's bug.
Build tested ARCH=arc allyesconfig with GCC arc-linux 15.2.0.
longhaul_exit() was calling cpufreq_cpu_get(0) without checking
for a NULL policy pointer. On some systems, this could lead to a
NULL dereference and a kernel warning or panic.
This patch adds a check using unlikely() and returns early if the
policy is NULL.
As per the design specification
"The 16-bit Seconds Calibration Value represents the number of
Oscillator Ticks that are required to measure the largest time period
that is less than or equal to 1 second.
For an oscillator that is 32.768kHz, this value will be 0x7FFF."
Commit e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level
APIs") redefined the way that bpf_prog_detach2() returns. Therefore, adapt
the usage in test_lirc_mode2_user.c.
On x86-64, USDT arguments can be specified using Scale-Index-Base (SIB)
addressing, e.g. "1@-96(%rbp,%rax,8)". The current USDT implementation
in libbpf cannot parse this format, causing `bpf_program__attach_usdt()`
to fail with -ENOENT (unrecognized register).
This patch fixes this by implementing the necessary changes:
- add correct handling for SIB-addressed arguments in `bpf_usdt_arg`.
- add adaptive support to `__bpf_usdt_arg_type` and
`__bpf_usdt_arg_spec` to represent SIB addressing parameters.
Since str_obj is allocated by ACPICA in acpi_evaluate_object_typed(),
it should be free with ACPI_FREE() rather than with kfree(), so use
the former instead of the latter for freeing it.
Send zc only links ubuf_info for requests coming from the same context.
There are some ambiguous syz reports, so let's check the assumption on
notification completion.
Interrupt controller eiointc routes interrupts to CPU interface IP0 - IP7.
It is currently hard-coded that eiointc routes interrupts to the CPU
starting from IP1, but it should base that decision on the parent
interrupt, which is provided by ACPI or DTS.
Retrieve the parent's hardware interrupt number and store it in the
descriptor of the eointc instance, so that the routing function can utilize
it for the correct route settings.
plic_set_affinity() always calls plic_irq_enable(), which clears up the
priority setting even the interrupt is only masked. This unmasks the
interrupt unexpectly.
Replace the plic_irq_enable/disable() with plic_irq_toggle() to avoid
changing the priority setting.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nam Cao <namcao@linutronix.de> # VisionFive 2 Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/all/20250811002633.55275-1-inochiama@gmail.com Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The value of OHCI1394_SelfIDCount register includes an error-indicating
bit. It is safer to place the tracepoint probe after validating the
register value.
The PM co-processor (device manager or DM) adds the ability to abort
entry to a low power mode by clearing the mode selection in the
latest version of its firmware (11.01.09) [1].
Enable the ti_sci driver to support the LPM abort call which clears the
low power mode selection of the DM. This fixes an issue where failed
system suspend attempts would cause subsequent suspends to fail.
After system suspend completes, regardless of if system suspend succeeds
or fails, the ->complete() hook in TI SCI will be called. In the
->complete() hook, a message will be sent to the DM to clear the current
low power mode selection. Clearing the low power mode selection
unconditionally will not cause any error in the DM.
In the following toy program (reg states minimized for readability), R0
and R1 always have different values at instruction 6. This is obvious
when reading the program but cannot be guessed from ranges alone as
they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).
Looking at tnums however, we can deduce that R1 is always different from
R0 because their tnums don't agree on known bits. This patch uses this
logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.
This change has a tiny impact on complexity, which was measured with
the Cilium complexity CI test. That test covers 72 programs with
various build and load time configurations for a total of 970 test
cases. For 80% of test cases, the patch has no impact. On the other
test cases, the patch decreases complexity by only 0.08% on average. In
the best case, the verifier needs to walk 3% less instructions and, in
the worst case, 1.5% more. Overall, the patch has a small positive
impact, especially for our largest programs.
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Add timeout handling to wait_for_completion calls in memstick_set_rw_addr()
and memstick_alloc_card() to prevent indefinite blocking in case of
hardware or communication failures.
In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or
PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias()
which writes the register. However, the subsequent operations continue
using the stale 'data' value from before the register write, effectively
causing the bias clear operation to be overwritten and not take effect.
Fix this by reading the 'data' value from the register after calling
pcs_pinconf_clear_bias().
This bug seems to have existed when this code was first merged in commit 9dddb4df90d1 ("pinctrl: single: support generic pinconf").
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card. This change is limited to Intel host controllers to
avoid an issue reported on ARM64 devices.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
During raw read, neither the status of the ECC correction nor the erased
state of the codeword gets checked by the qcom_spi_read_cw_raw() function,
so in case of raw access reading the corresponding registers via DMA is
superfluous.
Extend the qcom_spi_config_cw_read() function to evaluate the existing
(but actually unused) 'use_ecc' parameter, and configure reading only
the flash status register when ECC is not used.
With the change, the code gets in line with the corresponding part of
the config_nand_cw_read() function in the qcom_nandc driver.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Commit 9e36775c22c7 ("mfd: kempld: Remove custom DMI matching code")
removes the ability to load the driver if no matching system DMI data
is found. Before this commit the driver could be loaded using
alternative methods such as ACPI or `force_device_id` in the absence
of a matching system DMI entry.
Restore this ability while keeping the refactored
`platform_device_info` table.
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/7d2c7e92253d851194a781720051536cca2722b8.camel@secunet.com Signed-off-by: Lee Jones <lee@kernel.org> Cc: Michael Brunner <Michael.Brunner@jumptec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow pm_restrict_gfp_mask() to be called many times in a row to avoid
issues with calling dpm_suspend_start() when the GFP mask has been
already restricted.
Only the first invocation of pm_restrict_gfp_mask() will actually
restrict the GFP mask and the subsequent calls will warn if there is
a mismatch between the expected allowed GFP mask and the actual one.
Moreover, if pm_restrict_gfp_mask() is called many times in a row,
pm_restore_gfp_mask() needs to be called matching number of times in
a row to actually restore the GFP mask. Calling it when the GFP mask
has not been restricted will cause it to warn.
This is necessary for the GFP mask restriction starting in
hibernation_snapshot() to continue throughout the entire hibernation
flow until it completes or it is aborted (either by a wakeup event or
by an error).
To avoid code duplication and improve clarity, combine the code
paths in power_down() leading to a return from that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/3571055.QJadu78ljV@rafael.j.wysocki
[ rjw: Changed the new label name to "exit" ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 35e4a69b2003 ("PM: sleep: Allow pm_restrict_gfp_mask() stacking") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A throughput regression of 11% introduced by commit 779b1a1cb13a ("cpuidle:
governors: menu: Avoid selecting states with too much latency") has been
reported and it is related to the case when the menu governor checks if
selecting a proper idle state instead of a polling one makes sense.
In particular, it is questionable to do so if the exit latency of the
idle state in question exceeds the predicted idle duration, so add a
check for that, which is sufficient to make the reported regression go
away, and update the related code comment accordingly.
Fixes: 779b1a1cb13a ("cpuidle: governors: menu: Avoid selecting states with too much latency") Closes: https://lore.kernel.org/linux-pm/004501dc43c9$ec8aa930$c59ffb90$@telus.net/ Reported-by: Doug Smythies <dsmythies@telus.net> Tested-by: Doug Smythies <dsmythies@telus.net> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/12786727.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reduce the indentation level in the main loop of menu_select() by
rearranging some checks and assignments in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/2389215.ElGaqSPkdT@rafael.j.wysocki
Stable-dep-of: db86f55bf81a ("cpuidle: governors: menu: Select polling state in some more cases") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a MSG_PEEK | MSG_WAITALL read operation consumes all the bytes in the
receive queue and recvmsg() need to waits for more data - i.e. it's a
blocking one - upon arrival of the next packet the MPTCP protocol will
start again copying the oldest data present in the receive queue,
corrupting the data stream.
Address the issue explicitly tracking the peeked sequence number,
restarting from the last peeked byte.
Usage of the skb deferral API is straight-forward; with multiple
subflows actives this allow moving part of the received application
load into multiple CPUs.
Before commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`") Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fcddfc84ec8632f1443936b00aa26725) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com Reported-by: Sultan Alsawaf <sultan@kerneltoast.com> Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com> Tested-by: Sultan Alsawaf <sultan@kerneltoast.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367eb589bee8edcc722f812a89970e14b7) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preserve the I/O register bits in __ast_write8_i_masked() as specified
by preserve_mask. Accidentally OR-ing the output value into these will
overwrite the register's previous settings.
Fixes display output on the AST2300, where the screen can go blank at
boot. The driver's original commit 312fec1405dd ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)") already added
the broken code. Commit 6f719373b943 ("drm/ast: Blank with VGACR17 sync
enable, always clear VGACRB6 sync off") triggered the bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Peter Schneider <pschneider1968@googlemail.com> Closes: https://lore.kernel.org/dri-devel/a40caf8e-58ad-4f9c-af7f-54f6f69c29bb@googlemail.com/ Tested-by: Peter Schneider <pschneider1968@googlemail.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 6f719373b943 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off") Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Nick Bowler <nbowler@draconx.ca> Cc: Douglas Anderson <dianders@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.5+ Link: https://patch.msgid.link/20251024073626.129032-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On ADL-S the main DMC HRR event DMC_EVT_CTL/HTP are never
restored to their previous values during DC6 exit. This
angers assert_dmc_loaded(), and basically makes the HRR
handler unusable because we don't rewrite EVT_HTP when
enabling DMC events.
Let's just clear the HRR EVT_CTL/HTP to zero from the
beginnning so that the expected value matches the post-DC6
reality.
I suppose if we ever had actual use for HRR we'd have to both,
reject HRR+PSR, and reprogram EVT_HTP when enabling the event.
But for now we don't care about HRR so keeping both registers
zeroed is fine.
Cc: stable@vger.kernel.org Tested-by: Petr Vorel <pvorel@suse.cz> Fixes: 43175c92d403 ("drm/i915/dmc: Assert DMC is loaded harder") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15153 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-2-ville.syrjala@linux.intel.com Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 4df3b340ff6e9f499735d8b52b96a9257fde3918) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 1f403699c40f ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv") Reported-by: Sjoerd Simons <sjoerd@collabora.com> Closes: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@collabora.com Cc: stable@vger.kernel.org Cc: Ma Ke <make24@iscas.ac.cn> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Sjoerd Simons <sjoerd@collabora.com> Tested-by: Sjoerd Simons <sjoerd@collabora.com> Tested-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20251006093937.27869-1-johan@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nouveau_sched_fini() uses a memory barrier before wait_event().
wait_event(), however, is a macro which expands to a loop which might
check the passed condition several times. The barrier would only take
effect for the first check.
Replace the barrier with a function which takes the spinlock.
In a past bug fix it was forgotten that entity access must be protected
by the entity lock. That's a data race and potentially UB.
Move the spin_unlock() to the appropriate position.
Cc: stable@vger.kernel.org # v5.13+ Fixes: ac4eb83ab255 ("drm/sched: select new rq even if there is only one v3") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20251022063402.87318-2-phasta@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DRM scheduler tracks who last uses an entity and when that process
is killed blocks all further submissions to that entity.
The problem is that we didn't track who initially created an entity, so
when a process accidently leaked its file descriptor to a child and
that child got killed, we killed the parent's entities.
Avoid that and instead initialize the entities last user on entity
creation. This also allows to drop the extra NULL check.
The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not
deref that pointer, but forward NULL to the other plane-reset helpers.
Clears plane->state to NULL.
v2:
- fix typo in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: b71565022031 ("drm/gem: Export implementation of shadow-plane helpers") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/aPIDAsHIUHp_qSW4@stanley.mountain/ Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20251017091407.58488-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waking the device during a GT reset can lead to unintended memory
allocation, which is not allowed since GT resets occur in the reclaim
path. Prevent this by holding a PM reference while a reset is in flight.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20251022005538.828980-3-matthew.brost@intel.com
(cherry picked from commit 480b358e7d8ef69fd8f1b0cad6e07c7d70a36ee4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function has a memory leak when kvrealloc() fails.
The function directly assigns NULL to the markers pointer, losing the
reference to the previously allocated memory. This causes kvfree() in
pt_dump_init() to free NULL instead of the leaked memory.
Fix by:
1. Using kvrealloc() uniformly for all allocations
2. Using a temporary variable to preserve the original pointer until
allocation succeeds
3. Removing the error path that sets markers_cnt=0 to keep
consistency between markers and markers_cnt
Found via static analysis and this is similar to commit 42378a9ca553
("bpf, verifier: Fix memory leak in array reallocation for stack state")
projects / thirdparty / kernel / stable.git / log
