When a UMP Group is inactive, we shouldn't allow users to access it
via the legacy MIDI access. Add the group active flag check and
return -ENODEV if it's inactive.
During rename, we are updating link counts of various inodes either when
rename deletes target or when moving directory across directories.
Verify involved link counts are sane so that we don't trip warnings in
VFS.
Reported-by: syzbot+3ff7365dc04a6bcafa66@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the parent directory link count is too low (likely directory inode
corruption), just skip updating its link count as if it goes to 0 too
early it can cause unexpected issues.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the hardware revision numbering for Qlogic ISP1020/1040 boards. HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that we can register a SoC specific regmap with syscon using
of_syscon_register_regmap() api we can switch back to using
syscon_regmap_lookup_by_phandle() in the client drivers.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241029191131.2329414-1-peter.griffin@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro") Reported-by: Christopher Ferris <cferris@google.com> Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag() Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. When writing the OTG_CONFIG bit it uses POC_CHG_CONFIG_SHIFT which
should be POC_OTG_CONFIG_SHIFT.
2. When turning the regulator off it never turns charging back on. Note
this must be done through bq24190_charger_set_charge_type(), to ensure
that the charge_type property value of none/trickle/fast is honored.
Resolve both issues to fix BQ24296 Vbus regulator support not working.
Fixes: b150a703b56f ("power: supply: bq24190_charger: Add support for BQ24296") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241116203648.169100-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mapping VMA address is saved in VAS window struct when the
paste address is mapped. This VMA address is used during migration
to unmap the paste address if the window is active. The paste
address mapping will be removed when the window is closed or with
the munmap(). But the VMA address in the VAS window is not updated
with munmap() which is causing invalid access during migration.
The KASAN report shows:
[16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8
[16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928
[16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s:
[16386.256149] kasan_save_stack+0x34/0x68
[16386.256163] kasan_save_track+0x34/0x80
[16386.256175] kasan_save_alloc_info+0x58/0x74
[16386.256196] __kasan_slab_alloc+0xb8/0xdc
[16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0
[16386.256225] vm_area_alloc+0x44/0x150
[16386.256245] mmap_region+0x214/0x10c4
[16386.256265] do_mmap+0x5fc/0x750
[16386.256277] vm_mmap_pgoff+0x14c/0x24c
[16386.256292] ksys_mmap_pgoff+0x20c/0x348
[16386.256303] sys_mmap+0xd0/0x160
...
[16386.256350] Freed by task 0 on cpu 31 at 16386.204848s:
[16386.256363] kasan_save_stack+0x34/0x68
[16386.256374] kasan_save_track+0x34/0x80
[16386.256384] kasan_save_free_info+0x64/0x10c
[16386.256396] __kasan_slab_free+0x120/0x204
[16386.256415] kmem_cache_free+0x128/0x450
[16386.256428] vm_area_free_rcu_cb+0xa8/0xd8
[16386.256441] rcu_do_batch+0x2c8/0xcf0
[16386.256458] rcu_core+0x378/0x3c4
[16386.256473] handle_softirqs+0x20c/0x60c
[16386.256495] do_softirq_own_stack+0x6c/0x88
[16386.256509] do_softirq_own_stack+0x58/0x88
[16386.256521] __irq_exit_rcu+0x1a4/0x20c
[16386.256533] irq_exit+0x20/0x38
[16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c
...
[16386.256717] Last potentially related work creation:
[16386.256729] kasan_save_stack+0x34/0x68
[16386.256741] __kasan_record_aux_stack+0xcc/0x12c
[16386.256753] __call_rcu_common.constprop.0+0x94/0xd04
[16386.256766] vm_area_free+0x28/0x3c
[16386.256778] remove_vma+0xf4/0x114
[16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870
[16386.256811] __vm_munmap+0xe0/0x1f8
[16386.256821] sys_munmap+0x54/0x6c
[16386.256830] system_call_exception+0x1a0/0x4a0
[16386.256841] system_call_vectored_common+0x15c/0x2ec
[16386.256868] The buggy address belongs to the object at c00000014a819670
which belongs to the cache vm_area_struct of size 168
[16386.256887] The buggy address is located 0 bytes inside of
freed 168-byte region [c00000014a819670, c00000014a819718)
This patch adds close() callback in vas_vm_ops vm_operations_struct
which will be executed during munmap() before freeing VMA. The VMA
address in the VAS window is set to NULL after holding the window
mmap_mutex.
Update the DMI match for a Lenovo laptop to the new DMI identifier.
This laptop ships with a different DMI identifier to what was expected,
and now has two identifiers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 83c062ae81e8 ("ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20241216140821.153670-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free.
The linkDMA should not be released on stop trigger since a stream re-start
might happen without closing of the stream. This leaves a short time for
other streams to 'steal' the linkDMA since it has been released.
This issue is not easy to reproduce under normal conditions as usually
after stop the stream is closed, or the same stream is restarted, but if
another stream got in between the stop and start, like this:
aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120
CTRL+z
aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120
then the link DMA channels will be mixed up, resulting firmware error or
crash.
Fixes: ab5593793e90 ("ASoC: SOF: Intel: hda: Always clean up link DMA during stop") Cc: stable@vger.kernel.org Closes: https://github.com/thesofproject/sof/issues/9695 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20241217091019.31798-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The at_xdmac_memset_create_desc may return NULL, which will lead to a
null pointer dereference. For example, the len input is error, or the
atchan->free_descs_list is empty and memory is exhausted. Therefore, add
check to avoid this.
The ADMAC attached to the AOP has complex power sequencing, and is
power gated when the probe callback runs. Move the register reads
to other functions, where we can guarantee that the hardware is
switched on.
Current implementation of fsl_edma3_attach_pd() does not provide a
cleanup path, resulting in a memory leak. For example,
dev_pm_domain_detach() is not called after dev_pm_domain_attach_by_id(),
and the device link created with the DL_FLAG_STATELESS is not released
explicitly.
Therefore, provide a cleanup function fsl_edma3_detach_pd() and call it
upon failure. Also add a devm_add_action_or_reset() call with this
function after a successful fsl_edma3_attach_pd().
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Currently, the driver does not return the correct DMA status when a DMA
pause is issued by the client drivers. This causes GPCDMA users to
assume that DMA is still running, while in reality, the DMA is paused.
Return DMA_PAUSED for tx_status() if the channel is paused in the middle
of a transfer.
The recently submitted fix-commit revealed a problem in the iDMA 32-bit
platform code. Even though the controller supported only a single master
the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs
0 and 1. As a result the sanity check implemented in the commit b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
got incorrect interface data width and thus prevented the client drivers
from configuring the DMA-channel with the EINVAL error returned. E.g.,
the next error was printed for the PXA2xx SPI controller driver trying
to configure the requested channels:
> [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed
> [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor
> [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16
The problem would have been spotted much earlier if the iDMA 32-bit
controller supported more than one master interfaces. But since it
supports just a single master and the iDMA 32-bit specific code just
ignores the master IDs in the CTLLO preparation method, the issue has
been gone unnoticed so far.
Fix the problem by specifying the default master ID for both memory
and peripheral devices in the driver data. Thus the issue noticed for
the iDMA 32-bit controllers will be eliminated and the ACPI-probed
DW DMA controllers will be configured with the correct master ID by
default.
With CONFIG_DMA_API_DEBUG enabled, the following warning is observed:
DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single]
WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430
CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759
debug_dma_unmap_page+0xe9/0xf0
snd_dma_wc_free+0x85/0x130 [snd_pcm]
snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm]
snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm]
snd_pcm_ioctl+0x6a/0xc0 [snd_pcm]
...
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst.
Fixes: c880a5146642 ("ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/r/CABXGCsNB3RsMGvCucOy3byTEOxoc-Ys+zB_HQ=Opb_GhX1ioDA@mail.gmail.com/ Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Link: https://patch.msgid.link/20241219203345.195898-1-pchelkin@ispras.ru Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken.
usb usb8-port1: Cannot enable. Maybe the USB cable is bad?
This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but
only "phy resets" need assert and deassert, "apb resets" don't need.
So change the driver to only match the phy resets, which is also what
the vendor kernel does.
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before
platform_set_drvdata() is executed in ->probe(), leading to a NULL
pointer dereference when using the return of dev_get_drvdata().
Ensure platform_set_drvdata() is called before devm_pm_runtime_enable().
When bringing up the PHY, it might be in a bad state if left powered.
One case is we lose the PLL lock if the PLL is gated while the PHY
is powered. Toggle the PHY power so we can start from a known state.
Fixes: 4e5b9c9a73b3 ("phy: usb: Add support for new Synopsys USB controller on the 7216") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241024213540.1059412-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Cc: stable@vger.kernel.org Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In RX Lane configuration sequence of SC8280XP, the register
V5_RX_UCDR_FO_GAIN is incorrectly spelled as RX_UCDR_SO_GAIN and
hence the programming sequence is wrong. Fix the register sequence
accordingly to avoid any compliance failures. This has been tested
on SA8775P by checking device mode enumeration in SuperSpeed.
The NAND chip-selects are registered for the Arasan driver during
initialization but are not de-registered when the driver is unloaded. As a
result, if the driver is loaded again, the chip-selects remain registered
and busy, making them unavailable for use.
When two chip-selects are configured in the device tree, and the second is
a non-native GPIO, both the GPIO-based chip-select and the first native
chip-select may be asserted simultaneously. This double assertion causes
incorrect read and write operations.
The issue occurs because when nfc->ncs <= 2, nfc->spare_cs is always
initialized to 0 due to static initialization. Consequently, when the
second chip-select (GPIO-based) is selected in anfc_assert_cs(), it is
detected by anfc_is_gpio_cs(), and nfc->native_cs is assigned the value 0.
This results in both the GPIO-based chip-select being asserted and the
NAND controller register receiving 0, erroneously selecting the native
chip-select.
This patch resolves the issue, as confirmed by oscilloscope testing with
configurations involving two or more chip-selects in the device tree.
There may be a potential integer overflow issue in inftl_partscan().
parts[0].size is defined as "uint64_t" while mtd->erasesize and
ip->firstUnit are defined as 32-bit unsigned integer. The result of
the calculation will be limited to 32 bits without correct casting.
Before this commit, svc_export_put or expkey_put will call path_put with
sync mode. After this commit, path_put will be called with async mode.
And this can lead the unexpected results show as follow.
The touch will finally call nfsd_cross_mnt, add refcount to mount, and
then add cache_head. Before this commit, exportfs -r will call
cache_flush to cleanup all cache_head, and path_put in
svc_export_put/expkey_put will be finished with sync mode. So, the
latter umount will always success. However, after this commit, path_put
will be called with async mode, the latter umount may failed, and if
we add some delay, umount will success too. Personally I think this bug
and should be fixed. We first revert before bugfix patch, and then fix
the original bug with a different way.
Fixes: f8c989a0c89a ("nfsd: release svc_expkey/svc_export with rcu_work") Signed-off-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62df8 ("bpf: add bpf_skb_change_tail helper") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com Signed-off-by: Sasha Levin <sashal@kernel.org>
With recent netfs apis changes, the bytes written
value was not getting updated in /proc/fs/cifs/Stats.
Fix this by updating tcon->bytes in write operations.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available") Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If dup_mmap() encounters an issue, currently uprobe is able to access the
relevant mm via the reverse mapping (in build_map_info()), and if we are
very unlucky with a race window, observe invalid XA_ZERO_ENTRY state which
we establish as part of the fork error path.
This occurs because uprobe_write_opcode() invokes anon_vma_prepare() which
in turn invokes find_mergeable_anon_vma() that uses a VMA iterator,
invoking vma_iter_load() which uses the advanced maple tree API and thus
is able to observe XA_ZERO_ENTRY entries added to dup_mmap() in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in
dup_mmap()").
This change was made on the assumption that only process tear-down code
would actually observe (and make use of) these values. However this very
unlikely but still possible edge case with uprobes exists and
unfortunately does make these observable.
The uprobe operation prevents races against the dup_mmap() operation via
the dup_mmap_sem semaphore, which is acquired via uprobe_start_dup_mmap()
and dropped via uprobe_end_dup_mmap(), and held across
register_for_each_vma() prior to invoking build_map_info() which does the
reverse mapping lookup.
Currently these are acquired and dropped within dup_mmap(), which exposes
the race window prior to error handling in the invoking dup_mm() which
tears down the mm.
We can avoid all this by just moving the invocation of
uprobe_start_dup_mmap() and uprobe_end_dup_mmap() up a level to dup_mm()
and only release this lock once the dup_mmap() operation succeeds or clean
up is done.
This means that the uprobe code can never observe an incompletely
constructed mm and resolves the issue in this case.
Link: https://lkml.kernel.org/r/20241210172412.52995-1-lorenzo.stoakes@oracle.com Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: syzbot+2d788f4f7cb660dac4b7@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set the cache-line-size parameter of the L2 cache for each core to the
correct value of 64 bytes.
Previously, the L2 cache line size was incorrectly set to 128 bytes
for the Broadcom BCM2712. This causes validation tests for the
Performance Application Programming Interface (PAPI) tool to fail as
they depend on sysfs accurately reporting cache line sizes.
The correct value of 64 bytes is stated in the official documentation of
the ARM Cortex A-72, which is linked in the comments of
arm64/boot/dts/broadcom/bcm2712.dtsi as the source for cache-line-size.
Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5") Signed-off-by: Willow Cunningham <willow.e.cunningham@maine.edu> Link: https://lore.kernel.org/r/20241007212954.214724-1-willow.e.cunningham@maine.edu Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now, the epoll only use wake_up() interface to wake up task.
However, sometimes, there are epoll users which want to use
the synchronous wakeup flag to hint the scheduler, such as
Android binder driver.
So add a wake_up_sync() define, and use the wake_up_sync()
when the sync is true in ep_poll_callback().
Co-developed-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Link: https://lore.kernel.org/r/20240426080548.8203-1-xuewen.yan@unisoc.com Tested-by: Brian Geffon <bgeffon@google.com> Reviewed-by: Brian Geffon <bgeffon@google.com> Reported-by: Benoit Lize <lizeb@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Other page flags in the 2nd page, like PG_hwpoison and PG_anon_exclusive
can get modified concurrently. Changes to other page flags might be lost
if they are happening at the same time as non-atomic partially_mapped
operations. Hence, make partially_mapped operations atomic.
Link: https://lkml.kernel.org/r/20241212183351.1345389-1-usamaarif642@gmail.com Fixes: 8422acdc97ed ("mm: introduce a pageflag for partially mapped folios") Reported-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/all/e53b04ad-1827-43a2-a1ab-864c7efecf6e@redhat.com/ Signed-off-by: Usama Arif <usamaarif642@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Barry Song <baohua@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Nico Pache <npache@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
/proc/meminfo ShmemHugePages has been showing overlarge amounts (more than
Shmem) after swapping out THPs: we forgot to update NR_SHMEM_THPS.
Add shmem_update_stats(), to avoid repetition, and risk of making that
mistake again: the call from shmem_delete_from_page_cache() is the bugfix;
the call from shmem_replace_folio() is reassuring, but not really a bugfix
(replace corrects misplaced swapin readahead, but huge swapin readahead
would be a mistake).
Link: https://lkml.kernel.org/r/5ba477c8-a569-70b5-923e-09ab221af45b@google.com Fixes: 809bc86517cc ("mm: shmem: support large folio swap out") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current kernel, hugetlb_wp() calls copy_user_large_folio() with the
fault address. Where the fault address may be not aligned with the huge
page size. Then, copy_user_large_folio() may call
copy_user_gigantic_page() with the address, while
copy_user_gigantic_page() requires the address to be huge page size
aligned. So, this may cause memory corruption or information leak,
addtional, use more obvious naming 'addr_hint' instead of 'addr' for
copy_user_gigantic_page().
Link: https://lkml.kernel.org/r/20241028145656.932941-2-wangkefeng.wang@huawei.com Fixes: 530dd9926dc1 ("mm: memory: improve copy_user_large_folio()") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current kernel, hugetlb_no_page() calls folio_zero_user() with the
fault address. Where the fault address may be not aligned with the huge
page size. Then, folio_zero_user() may call clear_gigantic_page() with
the address, while clear_gigantic_page() requires the address to be huge
page size aligned. So, this may cause memory corruption or information
leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for
clear_gigantic_page().
Link: https://lkml.kernel.org/r/20241028145656.932941-1-wangkefeng.wang@huawei.com Fixes: 78fefd04c123 ("mm: memory: convert clear_huge_page() to folio_zero_user()") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked
and pages remain pinned if ceph_alloc_sparse_ext_map() fails.
There is no need to delay the allocation of sparse_ext map until after
the bvecs array is set up, so fix this by moving sparse_ext allocation
a bit earlier. Also, make a similar adjustment in __ceph_sync_read()
for consistency (a leak of the same kind in __ceph_sync_read() has been
addressed differently).
Cc: stable@vger.kernel.org Fixes: 03bc06c7b0bd ("ceph: add new mount option to enable sparse reads") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In two `break` statements, the call to ceph_release_page_vector() was
missing, leaking the allocation from ceph_alloc_page_vector().
Instead of adding the missing ceph_release_page_vector() calls, the
Ceph maintainers preferred to transfer page ownership to the
`ceph_osd_request` by passing `own_pages=true` to
osd_req_op_extent_osd_data_pages(). This requires postponing the
ceph_osdc_put_request() call until after the block that accesses the
`pages`.
Cc: stable@vger.kernel.org Fixes: 03bc06c7b0bd ("ceph: add new mount option to enable sparse reads") Fixes: f0fe1e54cfcf ("ceph: plumb in decryption during reads") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch refines the read logic in __ceph_sync_read() to ensure more
predictable and efficient behavior in various edge cases.
- Return early if the requested read length is zero or if the file size
(`i_size`) is zero.
- Initialize the index variable (`idx`) where needed and reorder some
code to ensure it is always set before use.
- Improve error handling by checking for negative return values earlier.
- Remove redundant encrypted file checks after failures. Only attempt
filesystem-level decryption if the read succeeded.
- Simplify leftover calculations to correctly handle cases where the
read extends beyond the end of the file or stops short. This can be
hit by continuously reading a file while, on another client, we keep
truncating and writing new data into it.
- This resolves multiple issues caused by integer and consequent buffer
overflow (`pages` array being accessed beyond `num_pages`):
- https://tracker.ceph.com/issues/67524
- https://tracker.ceph.com/issues/68980
- https://tracker.ceph.com/issues/68981
Cc: stable@vger.kernel.org Fixes: 1065da21e5df ("ceph: stop copying to iter at EOF on sync reads") Reported-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> Signed-off-by: Alex Markuze <amarkuze@redhat.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It becomes a path component, so it shouldn't exceed NAME_MAX
characters. This was hardened in commit c152737be22b ("ceph: Use
strscpy() instead of strcpy() in __get_snap_name()"), but no actual
check was put in place.
If the full path to be built by ceph_mdsc_build_path() happens to be
longer than PATH_MAX, then this function will enter an endless (retry)
loop, effectively blocking the whole task. Most of the machine
becomes unusable, making this a very simple and effective DoS
vulnerability.
I cannot imagine why this retry was ever implemented, but it seems
rather useless and harmful to me. Let's remove it and fail with
ENAMETOOLONG instead.
__of_get_dma_parent() returns OF device node @args.np, but the node's
refcount is increased twice, by both of_parse_phandle_with_args() and
of_node_get(), so causes refcount leakage for the node.
Fix by directly returning the node got by of_parse_phandle_with_args().
Fixes: f83a6e5dea6c ("of: address: Add support for the parent DMA bus") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241206-of_core_fix-v1-4-dc28ed56bec3@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code uses some 'goto put;' to cancel the parsing operation
and can lead to a return code value of 0 even on error cases.
Indeed, some goto calls are done from a loop without setting the ret
value explicitly before the goto call and so the ret value can be set to
0 due to operation done in previous loop iteration. For instance match
can be set to 0 in the previous loop iteration (leading to a new
iteration) but ret can also be set to 0 it the of_property_read_u32()
call succeed. In that case if no match are found or if an error is
detected the new iteration, the return value can be wrongly 0.
Avoid those cases setting the ret value explicitly before the goto
calls.
Fixes: bd6f2fd5a1d5 ("of: Support parsing phandle argument lists through a nexus node") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20241202165819.158681-1-herve.codina@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A missing or empty dma-ranges in a DT node implies a 1:1 mapping for dma
translations. In this specific case, the current behaviour is to zero out
the entire specifier so that the translation could be carried on as an
offset from zero. This includes address specifier that has flags (e.g.
PCI ranges).
Once the flags portion has been zeroed, the translation chain is broken
since the mapping functions will check the upcoming address specifier
against mismatching flags, always failing the 1:1 mapping and its entire
purpose of always succeeding.
Set to zero only the address portion while passing the flags through.
Fixes: dbbdee94734b ("of/address: Merge all of the bus translation code") Cc: stable@vger.kernel.org Signed-off-by: Andrea della Porta <andrea.porta@suse.com> Tested-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/e51ae57874e58a9b349c35e2e877425ebc075d7a.1732441813.git.andrea.porta@suse.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f00be96f125 ("of: property: Add device link support for
interrupt-parent, dmas and -gpio(s)") started adding device links for
the interrupt-parent property. commit 4104ca776ba3 ("of: property: Add
fw_devlink support for interrupts") and commit f265f06af194 ("of:
property: Fix fw_devlink handling of interrupts/interrupts-extended")
later added full support for parsing the interrupts and
interrupts-extended properties, which includes looking up the node of
the parent domain. This made the handler for the interrupt-parent
property redundant.
In fact, creating device links based solely on interrupt-parent is
problematic, because it can create spurious cycles. A node may have
this property without itself being an interrupt controller or consumer.
For example, this property is often present in the root node or a /soc
bus node to set the default interrupt parent for child nodes. However,
it is incorrect for the bus to depend on the interrupt controller, as
some of the bus's children may not be interrupt consumers at all or may
have a different interrupt parent.
Resolving these spurious dependency cycles can cause an incorrect probe
order for interrupt controller drivers. This was observed on a RISC-V
system with both an APLIC and IMSIC under /soc, where interrupt-parent
in /soc points to the APLIC, and the APLIC msi-parent points to the
IMSIC. fw_devlink found three dependency cycles and attempted to probe
the APLIC before the IMSIC. After applying this patch, there were no
dependency cycles and the probe order was correct.
Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Fixes: 4104ca776ba3 ("of: property: Add fw_devlink support for interrupts") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20241120233124.3649382-1-samuel.holland@sifive.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When F_SEAL_FUTURE_WRITE was introduced, it was overlooked that udmabuf
must reject memfds with this flag, just like ones with F_SEAL_WRITE.
Fix it by adding F_SEAL_FUTURE_WRITE to SEALS_DENIED.
Fixes: ab3948f58ff8 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Cc: stable@vger.kernel.org Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204-udmabuf-fixes-v2-2-23887289de1c@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current check_memfd_seals() is racy: Since we first do
check_memfd_seals() and then udmabuf_pin_folios() without holding any
relevant lock across both, F_SEAL_WRITE can be set in between.
This is problematic because we can end up holding pins to pages in a
write-sealed memfd.
Fix it using the inode lock, that's probably the easiest way.
In the future, we might want to consider moving this logic into memfd,
especially if anyone else wants to use memfd_pin_folios().
Because the inode bitmap is corrupted, an inode with an inode number that
should exist as a ".nilfs" file was reassigned by nilfs_mkdir for "file0",
causing an inode duplication during execution. And this causes an
underflow of i_nlink in rmdir operations.
The inode is used twice by the same task to unmount and remove directories
".nilfs" and "file0", it trigger warning in nilfs_rmdir.
Avoid to this issue, check i_nlink in nilfs_iget(), if it is 0, it means
that this inode has been deleted, and iput is executed to reclaim it.
When block_invalidatepage was converted to block_invalidate_folio, the
fallback to block_invalidatepage in folio_invalidate() if the
address_space_operations method invalidatepage (currently
invalidate_folio) was not set, was removed.
Unfortunately, some pseudo-inodes in nilfs2 use empty_aops set by
inode_init_always_gfp() as is, or explicitly set it to
address_space_operations. Therefore, with this change,
block_invalidatepage() is no longer called from folio_invalidate(), and as
a result, the buffer_head structures attached to these pages/folios are no
longer freed via try_to_free_buffers().
Thus, these buffer heads are now leaked by truncate_inode_pages(), which
cleans up the page cache from inode evict(), etc.
Three types of caches use empty_aops: gc inode caches and the DAT shadow
inode used by GC, and b-tree node caches. Of these, b-tree node caches
explicitly call invalidate_mapping_pages() during cleanup, which involves
calling try_to_free_buffers(), so the leak was not visible during normal
operation but worsened when GC was performed.
Fix this issue by using address_space_operations with invalidate_folio set
to block_invalidate_folio instead of empty_aops, which will ensure the
same behavior as before.
Commit 30dd3478c3cd ("ocfs2: correctly use ocfs2_find_next_zero_bit()")
introduced an issue, the ocfs2_sync_local_to_main() ignores the last
contiguous free bits, which causes an OCFS2 volume to lose the last free
clusters of LA window during the release routine.
Please note, because commit dfe6c5692fb5 ("ocfs2: fix the la space leak
when unmounting an ocfs2 volume") was reverted, this commit is a
replacement fix for commit dfe6c5692fb5.
Link: https://lkml.kernel.org/r/20241205104835.18223-3-heming.zhao@suse.com Fixes: 30dd3478c3cd ("ocfs2: correctly use ocfs2_find_next_zero_bit()") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Suggested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a malformed interrupt-map property which is shorter than expected by
1 cell, we may read bogus data past the end of the property instead of
returning an error in of_irq_parse_imap_parent().
Decrement the remaining length when skipping over the interrupt parent
phandle cell.
Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241209-of_irq_fix-v1-1-782f1419c8a1@quicinc.com
[rh: reword commit msg] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only
for the guest, as rejecting writes can lead to guest crashes, e.g. Windows
in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and
nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if
it exists_.
KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the
underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed
to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide
the desired/correct behavior without any additional action (the guest's
value is never stuffed into hardware). And having LFENCE be serializing
even when it's not _required_ to be is a-ok from a functional perspective.
Fixes: 74a0e79df68a ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value") Fixes: d1d93fa90f1a ("KVM: SVM: Add MSR-based feature support for serializing LFENCE") Reported-by: Simon Pilkington <simonp.git@mailbox.org> Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the server is recalling a layout, we should ignore the count of
outstanding layoutget calls, since the server is expected to return
either NFS4ERR_RECALLCONFLICT or NFS4ERR_RETURNCONFLICT for as long as
the recall is outstanding.
Currently, we may end up livelocking, causing the layout to eventually
be forcibly revoked.
Fixes: bf0291dd2267 ("pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race.
Currently, io_uring_unreg_ringfd() (which cleans up registered rings) is
only called on exit, but __io_uring_free (which frees the tctx in which the
registered ring pointers are stored) is also called on execve (via
begin_new_exec -> io_uring_task_cancel -> __io_uring_cancel ->
io_uring_cancel_generic -> __io_uring_free).
This means: A process going through execve while having registered rings
will leak references to the rings' `struct file`.
Fix it by zapping registered rings on execve(). This is implemented by
moving the io_uring_unreg_ringfd() from io_uring_files_cancel() into its
callee __io_uring_cancel(), which is called from io_uring_task_cancel() on
execve.
This could probably be exploited *on 32-bit kernels* by leaking 2^32
references to the same ring, because the file refcount is stored in a
pointer-sized field and get_file() doesn't have protection against
refcount overflow, just a WARN_ONCE(); but on 64-bit it should have no
impact beyond a memory leak.
Cc: stable@vger.kernel.org Fixes: e7a6c00dc77a ("io_uring: add support for registering ring file descriptors") Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20241218-uring-reg-ring-cleanup-v1-1-8f63e999045b@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, LoongArch LLVM does not support the constraint "o" and no plan
to support it, it only supports the similar constraint "m", so change the
constraints from "nor" in the "else" case to arch-specific "nmr" to avoid
the build error such as "unexpected asm memory constraint" for LoongArch.
The sysctl tests for vm.memfd_noexec rely on the kernel to support PID
namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the
kernel the test runs on does not support PID namespaces, the first sysctl
test will fail when attempting to spawn a new thread in a new PID
namespace, abort the test, preventing the remaining tests from being run.
This is not desirable, as not all kernels need PID namespaces, but can
still use the other features provided by memfd. Therefore, only run the
sysctl tests if the kernel supports PID namespaces. Otherwise, skip those
tests and emit an informative message to let the user know why the sysctl
tests are not being run.
Link: https://lkml.kernel.org/r/20241205192943.3228757-1-isaacmanjarres@google.com Fixes: 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Reviewed-by: Jeff Xu <jeffxu@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TP_printk() portion of a trace event is executed at the time a event
is read from the trace. This can happen seconds, minutes, hours, days,
months, years possibly later since the event was recorded. If the print
format contains a dereference to a string via "%s", and that string was
allocated, there's a chance that string could be freed before it is read
by the trace file.
To protect against such bugs, there are two functions that verify the
event. The first one is test_event_printk(), which is called when the
event is created. It reads the TP_printk() format as well as its arguments
to make sure nothing may be dereferencing a pointer that was not copied
into the ring buffer along with the event. If it is, it will trigger a
WARN_ON().
For strings that use "%s", it is not so easy. The string may not reside in
the ring buffer but may still be valid. Strings that are static and part
of the kernel proper which will not be freed for the life of the running
system, are safe to dereference. But to know if it is a pointer to a
static string or to something on the heap can not be determined until the
event is triggered.
This brings us to the second function that tests for the bad dereferencing
of strings, trace_check_vprintf(). It would walk through the printf format
looking for "%s", and when it finds it, it would validate that the pointer
is safe to read. If not, it would produces a WARN_ON() as well and write
into the ring buffer "[UNSAFE-MEMORY]".
The problem with this is how it used va_list to have vsnprintf() handle
all the cases that it didn't need to check. Instead of re-implementing
vsnprintf(), it would make a copy of the format up to the %s part, and
call vsnprintf() with the current va_list ap variable, where the ap would
then be ready to point at the string in question.
For architectures that passed va_list by reference this was possible. For
architectures that passed it by copy it was not. A test_can_verify()
function was used to differentiate between the two, and if it wasn't
possible, it would disable it.
Even for architectures where this was feasible, it was a stretch to rely
on such a method that is undocumented, and could cause issues later on
with new optimizations of the compiler.
Instead, the first function test_event_printk() was updated to look at
"%s" as well. If the "%s" argument is a pointer outside the event in the
ring buffer, it would find the field type of the event that is the problem
and mark the structure with a new flag called "needs_test". The event
itself will be marked by TRACE_EVENT_FL_TEST_STR to let it be known that
this event has a field that needs to be verified before the event can be
printed using the printf format.
When the event fields are created from the field type structure, the
fields would copy the field type's "needs_test" value.
Finally, before being printed, a new function ignore_event() is called
which will check if the event has the TEST_STR flag set (if not, it
returns false). If the flag is set, it then iterates through the events
fields looking for the ones that have the "needs_test" flag set.
Then it uses the offset field from the field structure to find the pointer
in the ring buffer event. It runs the tests to make sure that pointer is
safe to print and if not, it triggers the WARN_ON() and also adds to the
trace output that the event in question has an unsafe memory access.
The ignore_event() makes the trace_check_vprintf() obsolete so it is
removed.
Link: https://lore.kernel.org/all/CAHk-=wh3uOnqnZPpR0PeLZZtyWbZLboZ7cHLCKRWsocvs9Y7hQ@mail.gmail.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20241217024720.848621576@goodmis.org Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test_event_printk() code makes sure that when a trace event is
registered, any dereferenced pointers in from the event's TP_printk() are
pointing to content in the ring buffer. But currently it does not handle
"%s", as there's cases where the string pointer saved in the ring buffer
points to a static string in the kernel that will never be freed. As that
is a valid case, the pointer needs to be checked at runtime.
Currently the runtime check is done via trace_check_vprintf(), but to not
have to replicate everything in vsnprintf() it does some logic with the
va_list that may not be reliable across architectures. In order to get rid
of that logic, more work in the test_event_printk() needs to be done. Some
of the strings can be validated at this time when it is obvious the string
is valid because the string will be saved in the ring buffer content.
Do all the validation of strings in the ring buffer at boot in
test_event_printk(), and make sure that the field of the strings that
point into the kernel are accessible. This will allow adding checks at
runtime that will validate the fields themselves and not rely on paring
the TP_printk() format at runtime.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20241217024720.685917008@goodmis.org Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The process_pointer() helper function looks to see if various trace event
macros are used. These macros are for storing data in the event. This
makes it safe to dereference as the dereference will then point into the
event on the ring buffer where the content of the data stays with the
event itself.
The test_event_printk() analyzes print formats of trace events looking for
cases where it may dereference a pointer that is not in the ring buffer
which can possibly be a bug when the trace event is read from the ring
buffer and the content of that pointer no longer exists.
The function needs to accurately go from one print format argument to the
next. It handles quotes and parenthesis that may be included in an
argument. When it finds the start of the next argument, it uses a simple
"c = strstr(fmt + i, ',')" to find the end of that argument!
In order to include "%s" dereferencing, it needs to process the entire
content of the print format argument and not just the content of the first
',' it finds. As there may be content like:
Which is an example of a full argument of an existing event. As the code
already handles finding the next print format argument, process the
argument at the end of it and not the start of it. This way it has both
the start of the argument as well as the end of it.
Add a helper function "process_pointer()" that will do the processing during
the loop as well as at the end. It also makes the code cleaner and easier
to read.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20241217024720.362271189@goodmis.org Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move pm_runtime_set_active() to ivpu_pm_init() so when
ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable()
it already has correct runtime state, even if last resume was
not successful.
Fixes: 8ed520ff4682 ("accel/ivpu: Move set autosuspend delay to HW specific code") Cc: stable@vger.kernel.org # v6.7+ Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc48
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") Cc: stable@vger.kernel.org Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hv_fcopy_uio_daemon.c:436:53: warning: '%s' directive output may be truncated
writing up to 14 bytes into a region of size 10 [-Wformat-truncation=]
436 | snprintf(uio_dev_path, sizeof(uio_dev_path), "/dev/%s", uio_name);
Also added 'static' for the array 'desc[]'.
Fixes: 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver") Cc: stable@vger.kernel.org # 6.10+ Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20240910004433.50254-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240910004433.50254-1-decui@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can happen because the KVP/VSS channel callback can be invoked
even before the channel is fully opened:
1) as soon as hv_kvp_init() -> hvutil_transport_init() creates
/dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and
register itself to the driver by writing a message KVP_OP_REGISTER1 to the
file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and
reading the file for the driver's response, which is handled by
hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done().
2) the problem with kvp_register_done() is that it can cause the
channel callback to be called even before the channel is fully opened,
and when the channel callback is starting to run, util_probe()->
vmbus_open() may have not initialized the ringbuffer yet, so the
callback can hit the panic of NULL pointer dereference.
To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in
__vmbus_open(), just before the first hv_ringbuffer_init(), and then we
unload and reload the driver hv_utils, and run the daemon manually within
the 10 seconds.
Fix the panic by reordering the steps in util_probe() so the char dev
entry used by the KVP or VSS daemon is not created until after
vmbus_open() has completed. This reordering prevents the race condition
from happening.
Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241106154247.2271-3-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A bug was discovered where the idle shadow stacks were not initialized
for offline CPUs when starting function graph tracer, and when they came
online they were not traced due to the missing shadow stack. To fix
this, the idle task shadow stack initialization was moved to using the
CPU hotplug callbacks. But it removed the initialization when the
function graph was enabled. The problem here is that the hotplug
callbacks are called when the CPUs come online, but the idle shadow
stack initialization only happens if function graph is currently
active. This caused the online CPUs to not get their shadow stack
initialized.
The idle shadow stack initialization still needs to be done when the
function graph is registered, as they will not be allocated if function
graph is not registered.
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63bfd24088b42c6f55c2096bfc41b50213d419b2) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f1fd1d0f40272948aa6ab82a3a82ecbbc76dff53) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0ec43fbece784215d3c4469973e4556d70bce915) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With uncoupling of physical and virtual address spaces population of
the identity mapping was changed to use the type POPULATE_IDENTITY
instead of POPULATE_DIRECT. This breaks DirectMap accounting:
Adjust all locations of update_page_count() in vmem.c to use
POPULATE_IDENTITY instead of POPULATE_DIRECT as well. With this
accounting is correct again:
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes 2113536.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+ Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/ Reported-by: Frankie Fisher <frankie@terrorise.me.uk> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
to make decisions about whether or not to visit a node during snapshot
delete. This is because for normal subvolumes this is set to 0, and for
snapshots it's set to the creation generation. The idea being that if
the generation of the node is less than or equal to our creation
generation then we don't need to visit that node, because it doesn't
belong to us, we can simply drop our reference and move on.
However reloc roots don't have their generation stored in
root->root_key.offset, instead that is the objectid of their
corresponding fs root. This means we can incorrectly not walk into
nodes that need to be dropped when deleting a reloc root.
There are a variety of consequences to making the wrong choice in two
distinct areas.
visit_node_for_delete()
1. False positive. We think we are newer than the block when we really
aren't. We don't visit the node and drop our reference to the node
and carry on. This would result in leaked space.
2. False negative. We do decide to walk down into a block that we
should have just dropped our reference to. However this means that
the child node will have refs > 1, so we will switch to
UPDATE_BACKREF, and then the subsequent walk_down_proc() will notice
that btrfs_header_owner(node) != root->root_key.objectid and it'll
break out of the loop, and then walk_up_proc() will drop our reference,
so this appears to be ok.
do_walk_down()
1. False positive. We are in UPDATE_BACKREF and incorrectly decide that
we are done and don't need to update the backref for our lower nodes.
This is another case that simply won't happen with relocation, as we
only have to do UPDATE_BACKREF if the node below us was shared and
didn't have FULL_BACKREF set, and since we don't own that node
because we're a reloc root we actually won't end up in this case.
2. False negative. Again this is tricky because as described above, we
simply wouldn't be here from relocation, because we don't own any of
the nodes because we never set btrfs_header_owner() to the reloc root
objectid, and we always use FULL_BACKREF, we never actually need to
set FULL_BACKREF on any children.
Having spent a lot of time stressing relocation/snapshot delete recently
I've not seen this pop in practice. But this is objectively incorrect,
so fix this to get the correct starting generation based on the root
we're dropping to keep me from thinking there's a problem here.
CC: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
