Matthew Jordan [Wed, 13 Jun 2012 20:28:07 +0000 (20:28 +0000)]
Mark res_smdi/res_adsi as 'core' supported modules
Recently, various issues surrounding weak symbols have caused problems with
modules that rely on that feature to be enabled in menuselect. This includes
app_voicemail and chan_dahdi, as they both rely upon res_smdi and res_adsi,
which, in certain circumstances, may not be enabled by default in menuselect.
Because res_smdi/res_adsi are dependencies for chan_dahdi/app_voicemail, this
patch marks both as 'core' supported modules. This will allow both
app_voicemail and chan_dahdi to be enabled as well, regardless of whether or
not that system supports weak symbols.
(issue AST-900)
Reported by: Thomas Arimont
(issue AST-885)
Reported by: Denis Alberto Martinez
........
Merged revisions 368894 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368895 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Wed, 13 Jun 2012 14:31:24 +0000 (14:31 +0000)]
Do not install empty directories; add ASTLIBDIR
r368830 modified the installation script to only create a directory if that
directory does not exist. If some directory variable was empty, it would attempt
to create the empty location. It also failed to create the ASTLIBDIR directory.
This patch fixes it such that the correct directories are made and only created if
a value specifying them actually exists.
........
Merged revisions 368852 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368853 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 12 Jun 2012 18:41:50 +0000 (18:41 +0000)]
Do not perform install on existing directories
If a directory already exists, performing a 'make install' will remove the
permissions associated with the current directory and replace them with the
permissions of the user executing the install.
This patch changes this behavior to only perform an install on the directory
if the directory does not exist. Thus, if a user later changes the permissions
on that directory, those permissions will be preserved in subsequent installs.
Review: https://reviewboard.asterisk.org/r/1986
Review: https://reviewboard.asterisk.org/r/1864
(closes issue ASTERISK-19492)
Reported by: Karl Fife
Tested by: Paul Belanger, Tilghman Lesher
patches:
ASTERISK-19492 by pabelanger
(uploaded by mjordan)
........
Merged revisions 368830 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368831 from http://svn.asterisk.org/svn/asterisk/branches/10
Mark Michelson [Tue, 12 Jun 2012 15:46:48 +0000 (15:46 +0000)]
Set the Caller ID "tag" on peers even if remote party information is present.
On incoming calls, we were setting the cid_tag on the dialog only if there was
no remote party information (Remote-Party-ID or P-Asserted-Identity) present.
The Caller ID tag is an invented parameter, though, and should be set no matter
the circumstance.
(closes issue ASTERISK-19859)
Reported by Thomas Arimont
(closes issue AST-884)
Reported by Trey Blancher
........
Merged revisions 368807 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368808 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 12 Jun 2012 14:07:13 +0000 (14:07 +0000)]
Fix deadlock in SIP transfers that involve a REFER request
In r367163, "send to voicemail" functionality was added to the SIP channel
driver. This required updating the party redirecting information for the
channel based on the headers provided in the REFER request. When the
redirecting party information is updated on the channel, a call to
ast_indicate_data occurs. Because handle_request_refer still had the sip_pvt
locked, a deadlock could occur between the pbx_thread and the do_monitor thread
servicing the REFER request.
This patch preserves the proper locking order between the channel and the
sip_pvt by ensuring that the sip_pvt is unlocked prior to updating the party
redirecting information on the channel.
(closes issue AST-903)
Reported by: Matt Jordan
patches:
jira_ast_903_trunk.patch by rmudgett (license 5621)
Kinsey Moore [Tue, 12 Jun 2012 04:03:23 +0000 (04:03 +0000)]
Parse ANI2 information from SIP From header parameters
ANI2 information is now parsed out of SIP From headers when present in
the oli, isup-oli, and ss7-oli parameters and is available via the
CALLERID(ani2) dialplan function.
(closes issue ASTERISK-19912) Patch-by: Rob Gagnon
Review: https://reviewboard.asterisk.org/r/1947/
Fix MWI update so LED display correct voicemail state after phone usage. Also fixes few warnings.
(closes issue #19675)
Reported by: dbohling
Patches:
fixmwi.patch uploaded by dbohling (license 6378)
Damien Wedhorn [Thu, 7 Jun 2012 21:23:42 +0000 (21:23 +0000)]
Skinny cleanup.
Removed d->registered which was mirroring d->session. Changed relevant
references to use d->session instead.
Moved setting and unsetting of l->device from session register to device
configuration. As such, l->device will always be valid unless it is has not
been configured to a device. Revised various test where checking if a device
is registered to use l->device->session.
Terry Wilson [Thu, 7 Jun 2012 20:32:07 +0000 (20:32 +0000)]
Fix reloading an unchanged file with the Config Options API
Adding multiple file support broke reloading an unchanged file. This
adds an enum for return values for the aco_process_* functions and
ensures that the config is not applied if res is not ACO_PROCESS_OK.
Terry Wilson [Thu, 7 Jun 2012 15:43:37 +0000 (15:43 +0000)]
Add default handler documentation and standardize acl handler
Added documentation describing what flags and arguments to pass to
aco_option_register for default option types. Also changed the ACL
handler to use the flags parameter to differentiate between "permit"
and "deny" instead of adding an additional vararg parameter.
Richard Mudgett [Wed, 6 Jun 2012 21:34:10 +0000 (21:34 +0000)]
Fix POTS flash hook to orignate a second call deadlock.
A deadlock can occur when a POTS phone tries to flash hook to originate a
second call for 3-way or transfer. If another process is scanning the
channels container when the POTS line flash hooks then a deadlock will
occur.
* Release the channel and private locks when creating a new channel as a
result of a flash hook.
Mark Michelson [Wed, 6 Jun 2012 19:25:44 +0000 (19:25 +0000)]
Fix a specific scenario where ACKs are not matched.
If a dialog-starting INVITE contains a to-tag, then Asterisk
will respond with a 481. In this case, the resulting incoming
ACK would not be matched, so Asterisk would continue retransmitting
the 481 until the transaction times out.
There were two issues. Asterisk, upon creating a sip_pvt would generate
a local tag. However, when the time came to transmit the 481, since there
was a to-tag in the INVITE, Asterisk would place this original to-tag
in the 481 response. When the ACK came in, Asterisk would attempt to
match the to-tag in the ACK to the generated local tag. Unfortunately,
Asterisk never actually transmitted a response with the generated local
tag, so the to-tag in the ACK would not match.
The other problem was that when the 481 was sent, nothing was set
on the sip_pvt to indicate what CSeq is expected in the ACK.
To fix the first problem, we zero out the to-tag seen in the incoming
INVITE. This way, Asterisk, when time to send a response, will send
its generated local tag instead.
To fix the second problem, we set the sip_pvt's pendinginvite to the
CSeq of the INVITE when we send a 481.
(closes issue ASTERISK-19892)
Reported by Mark Michelson
........
Merged revisions 368625 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368629 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Wed, 6 Jun 2012 17:22:11 +0000 (17:22 +0000)]
Add feature modifier to versions produced from branches
Certain branches, such as Certified Asterisk, may have a modifier added to
them that specifies the features available in that branch. For branches, this
modifier is expected to be reflected in the location of the branch in
subversion. For example, a subversion of URL of /certified/branches/1.8.11
would have a feature modifier of 'certified'. This is slightly different then
how features are determined for tags, where the feature is part of the actual
tag name, e.g., "10.5.0-digiumphones".
In keeping with the nomenclature used for tags, the feature specifier for
branches is translated and placed after the revision numbers. For the example
given previously, this would result in a branch version of
"Asterisk SVN-branch-1.8.11-cert-rXXXXXX".
........
Merged revisions 368604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368605 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Wed, 6 Jun 2012 01:11:12 +0000 (01:11 +0000)]
Fix parked call performing a DTMF blind transfer after being retrieved.
When a parked call was retrieved from the parking lot, it could not do a
blind transfer because it caused the involved calls to be hung up
unconditionally.
* Made the ParkedCall application return the ast_bridge_call() return
value.
Kinsey Moore [Tue, 5 Jun 2012 15:23:43 +0000 (15:23 +0000)]
Ensure that pages and emails are sent using RFC822-compliant date format
When localization was added to app_voicemail, these headers were altered
when they should have remained in en_US format for RFC compliance. This
reverts the changes to those two lines.
(closes issue ASTERISK-19876)
........
Merged revisions 368520 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368524 from http://svn.asterisk.org/svn/asterisk/branches/10
Kinsey Moore [Tue, 5 Jun 2012 14:41:43 +0000 (14:41 +0000)]
Convert AST_FLAG_ANSWERED_ELSEWHERE usage to AST_CAUSE_ANSWERED_ELSEWHERE
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Mark Michelson [Mon, 4 Jun 2012 22:12:19 +0000 (22:12 +0000)]
Relay proper SIP responses on calling side.
Revision 351130 broke corect HANGUPCAUSE setting
for the 404 case in chan_sip. Other cases were also
potentially broken. This patch fixes the relaying
of causes to be what they used to be.
(closes issue ASTERISK-19914)
Reported by Pavel Troller
Tested by Walter Doekes (via a reviewboard test to be committed later)
Patches:
chan_sip.diff uploaded by Pavel Troller (license #6302)
........
Merged revisions 368498 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368499 from http://svn.asterisk.org/svn/asterisk/branches/10
Mark Michelson [Mon, 4 Jun 2012 20:26:12 +0000 (20:26 +0000)]
Merge changes dealing with support for Digium phones.
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
Richard Mudgett [Mon, 4 Jun 2012 19:46:33 +0000 (19:46 +0000)]
Fix potential deadlock between masquerade and chan_local.
* Restructure ast_do_masquerade() to not hold channel locks while it calls
ast_indicate().
* Simplify many calls to ast_do_masquerade() since it will never return a
failure now. If it does fail internally because a channel driver callback
operation failed, the only thing ast_do_masquerade() can do is generate a
warning message about strange things may happen and press on.
* Fixed the call to ast_bridged_channel() in ast_do_masquerade(). This
change fixes half of the deadlock reported in ASTERISK-19801 between
masquerades and chan_iax.
Asterisk should not accept SDP offers that contain unknown RTP profiles (for
audio/video streams) or unknown top-level media types. When it does, it answers
with an SDP that does not match the offer properly, and this will nearly
always result in a broken call. This patch causes such offers to be rejected.
* 'Unsupported media type' is only reported when that is in fact the case,
not when a supported media type is included in an 'm' line that has an
invalid format.
* All warning messages related to parsing 'm' lines now include the 'm' line contents.
* (minor bugfix) newline added to port-number-zero warning messages.
* Warning messages improved to use RFC-specified terminology for various items.
* Warnings for offers that include more than one port for a single media type now
include the media type.
Terry Wilson [Fri, 1 Jun 2012 16:33:25 +0000 (16:33 +0000)]
Add new config-parsing framework
This framework adds a way to register the various options in a config
file with Asterisk and to handle loading and reloading of that config
in a consistent and atomic manner.
Mark Michelson [Fri, 1 Jun 2012 13:04:32 +0000 (13:04 +0000)]
Help mitigate potential reinvite glare scenarios.
When Asterisk servers are set up back-to-back, and
direct media is to be used betweeen endpoints, it is
fairly common for the two Asterisk servers to send
direct media reinvites to each other simultaneously.
This results in 491s and ACKs being exchanged between
the servers. While the media eventually gets set up
properly, the problem is that there can be a noticeable
delay for the streams to stabilize.
This patch adds a new directmedia option called "outgoing".
With this set, an immediate direct media reinvite will only
be sent if the call direction is outgoing. For incoming
dialogs, an immediate direct media reinvite will not be sent,
but further "reactionary" direct media reinvites may be sent.
Add documentation to function CHANNEL for options echocan_mode and buffers
The ability to set "echocan_mode" and "buffers" through the dialplan was added
to chan_dahdi some time ago. This patch adds some documentation to
func_channel.
(Closes issue ASTERISK-19911)
Reported by: Dale Noll
Tested by: Michael L. Young
Patches:
asterisk-19911-branch18.diff uploaded by Michael L. Young (license 5026)
Richard Mudgett [Wed, 30 May 2012 17:50:38 +0000 (17:50 +0000)]
Fix deadlock when executing CLI "pri show channels" and "ss7 show channels" commands.
* Fix sig_pri_lock_owner() to avoid deadlock properly.
* Code pri_grab() better.
* Fix sig_ss7_lock_owner() to avoid deadlock properly.
* Code ss7_grab() better.
(closes issue ASTERISK-19854)
Reported by: Jaxon
Patches:
jira_asterisk_19854_v1.8.6.patch (license #5621) patch uploaded by rmudgett (Modified to do the same thing to sig_ss7)
Tested by: Jaxon
........
Merged revisions 367976 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367978 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Tue, 29 May 2012 22:37:19 +0000 (22:37 +0000)]
Coverity Report: Fix issues for error type REVERSE_INULL (deprecated modules)
* Fix only issue pointed out by deprecated_REVERSE_INULL.txt for
app_meetme.c in find_user().
* Change use of %i to %d in sscanf() in find_user(). The use of %i gives
unexpected parsing because it can accept hex, octal, and decimal integer
formats.
* Changed other uses of %i in app_meetme() to use %d for consistency.
(issue ASTERISK-19648)
Reported by: Matt Jordan
........
Merged revisions 367906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367907 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 29 May 2012 18:40:26 +0000 (18:40 +0000)]
AST-2012-008: Fix remote crash vulnerability in chan_skinny
When a skinny session is unregistered, the corresponding device pointer is set
to NULL in the channel private data. If the client was not in the on-hook state
at the time the connection was closed, the device pointer can later be
dereferened if a message or channel event attempts to use a line's pointer to
said device.
The patches prevent this from occurring by checking the line's pointer in
message handlers and channel callbacks that can fire after an unregistration
attempt.
(closes issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Damien Wedhorn
Patches:
AST-2012-008-1.8.diff uploaded by mjordan (license 6283)
AST-2012-008-10.diff uploaded by mjordan (licesen 6283)
........
Merged revisions 367844 from http://svn.asterisk.org/svn/asterisk/branches/10
Michael L. Young [Fri, 25 May 2012 02:31:58 +0000 (02:31 +0000)]
Fix pvt_sip for inbound call to use peer's allowtransfer setting
The pvt_sip allowtransfer was not being set to that of the peer's setting.
Therefore, the global allowtransfer setting was being used instead which would
lead to calls not being transfered if the global setting was set to 'no' despite
the setting on the peer being 'yes' and vice versa, calls would be allowed to
transfer even if the peer's setting was 'no' but the global setting was 'yes'.
(Closes issue ASTERISK-19856)
Reported by: Jacek
Tested by: Michael L. Young, Jacek
Patches:
issue-asterisk-19856-branch10-v3.diff uploaded by
Michael L. Young (license 5026)
Richard Mudgett [Thu, 24 May 2012 23:52:40 +0000 (23:52 +0000)]
Fix Dial I option ignored if dial forked and one fork redirects.
The Dial and Queue I option is intended to block connected line updates
and redirecting updates. However, it is a feature that when a call is
locally redirected, the I option is disabled if the redirected call runs
as a local channel so the administrator can have an opportunity to setup
new connected line information. Unfortunately, the Dial and Queue I
option is disabled for *all* forked calls if one of those calls is
redirected.
* Make the Dial and Queue I option apply to each outgoing call leg
independently. Now if one outgoing call leg is locally redirected, the
other outgoing calls are not affected.
* Made Dial not pass any redirecting updates when forking calls.
Redirecting updates do not make sense for this scenario.
* Made Queue not pass any redirecting updates when using the ringall
strategy. Redirecting updates do not make sense for this scenario.
* Fixed deadlock potential with chan_local when Dial and Queue send
redirecting updates for a local redirect.
* Converted the Queue stillgoing flag to a boolean bitfield.
Jonathan Rose [Thu, 24 May 2012 18:56:43 +0000 (18:56 +0000)]
chan_sip: fix problem directmediapermit/deny uses the wrong address
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
Jonathan Rose [Thu, 24 May 2012 16:12:11 +0000 (16:12 +0000)]
Blocked revisions 366591
........
chan_sip: Check the right channel's host address for directmediapermit/deny
Prior to this patch, when checking the addresses for directmediapermit and
directmediadeny, Asterisk would check the host address of the channel
permit/deny was specified, which differs from the expectations of both
our users and the development team. Instead, directmediapermit/deny now
checks against the address of the channel that the peer with the ACL is
connected to.
Matthew Jordan [Thu, 24 May 2012 13:33:53 +0000 (13:33 +0000)]
Fix crash in ConfBridge when user announcement is played for more than 2 users
A patch introduced in r354938 made it so that ConfBridge would not attempt to
play sound files if those files did not exist. Unfortunately, ConfBridge uses
the same underlying function, play_sound_helper, to playback both sound files
and numbers to callers. When a number is being played back, the name of the
sound file is expected to be NULL. This NULL value was passed into a function
that tested for the existance of a sound file and is not tolerant to NULL
file names, causing a crash.
This patch fixes the behavior, such that if a sound file does not exist we
do not attempt to play it, but we only attempt that check if the a sound file
was specified in the first place. If a sound file was not specified, we use
the 'play number' logic in the helper function.
The AST_CONTROL_HOLD MOH class from the WaitExten application can now be
queued onto a channel, passed over local channels with the /m option, and
passed over IAX channels.
........
Merged revisions 367469 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367470 from http://svn.asterisk.org/svn/asterisk/branches/10
Jonathan Rose [Wed, 23 May 2012 20:39:22 +0000 (20:39 +0000)]
logger: Fix a potential callid reference leak discovered in development
Uncovered a nasty reference leak while I was writing some changes to
chan_dahdi/sig_analog. Slapped myself around a bit after seeing that I
performed the unchecked return causing this problem.
Matthew Jordan [Wed, 23 May 2012 13:46:38 +0000 (13:46 +0000)]
Re-add LastMsgsSent value for SIP peers
Previously, MWI logic utilized a counter called 'lastmsgssent' to know whether
or not MWI NOTIFY requests had been sent to a specific peer. When MWI
notifications were changed to use the internal event framework, this value was
no longer needed for its original purpose. Hence, it was no longer updated
with the new/old message counts for a peer. The value was previously removed
for Asterisk 10; however, since it was still present in Asterisk 1.8 and still
useful for reporting purposes, it was decided to re-add the value.
This patch re-adds the 'LastMsgsSent' field in the response to an AMI/CLI 'sip
show peer [peer]' command, and makes it so that the value of lastmsgssent is
updated appropriately. The value should now display the new/old message counts
for a particular peer.
(closes issue ASTERISK-17866)
Reported by: Steve Davies
patches by:
ast-17866-rb1272.patch (License #5041 by irroot)
Modified slightly for this commit
Terry Wilson [Tue, 22 May 2012 17:29:12 +0000 (17:29 +0000)]
Fix race condition for CEL LINKEDID_END event
This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Terry Wilson [Tue, 22 May 2012 16:23:19 +0000 (16:23 +0000)]
Resolve crash in subscribing for MWI notifications
ASTOBJ_UNREF sets the variable to NULL after unreffing it, so the variable
should definitely not be used after that. To solve this in the two cases
that affect subscribing for MWI notifications, we instead save the ref
locally, and unref them in the error conditions.
(closes issue ASTERISK-19827)
Reported by: B. R
Review: https://reviewboard.asterisk.org/r/1940/
........
Merged revisions 367266 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367267 from http://svn.asterisk.org/svn/asterisk/branches/10
Mark Michelson [Mon, 21 May 2012 19:22:25 +0000 (19:22 +0000)]
Add "send to voicemail" Digium phone functionality to Asterisk.
This change accommodates two methods by which calls can be directed to
a user's voicemail.
* Incoming calls can be redirected to any user's voicemail.
* Established calls can be blind transferred to any user's voicemail.
Digium phones indicate the desire to direct a call to voicemail by using
a Diversion header with a reason parameter of "send_to_vm".
This patch adds the "send_to_vm" reason as a valid redirecting reason. In
addition, chan_sip.c has been modified to update redirecting information
on the transferred channel by reading a Diversion header on a REFER request.
(closes issue AST-871)
Reported by Malcolm Davenport
Jonathan Rose [Fri, 18 May 2012 19:39:54 +0000 (19:39 +0000)]
app_queue: Per Member ringinuse option and deprecation of ignorebusy
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
Mark Michelson [Fri, 18 May 2012 17:24:57 +0000 (17:24 +0000)]
Fix memory leak of SSL_CTX structures in TLS core.
SSL_CTX structures were allocated but never freed. This was a bigger
issue for clients than servers since new SSL_CTX structures could be
allocated for each connection. Servers, on the other hand, typically
set up a single SSL_CTX for their lifetime.
This is solved in two ways:
1. In __ssl_setup(), if a tcptls_cfg has an ssl_ctx on it, it is
freed so that a new one can take its place.
2. A companion to ast_ssl_setup() called ast_ssl_teardown() has
been added so that servers can properly free their SSL_CTXs.
(issue ASTERISK-19278)
........
Merged revisions 367002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367003 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Fri, 18 May 2012 15:51:16 +0000 (15:51 +0000)]
Fix more memory leaks
This patch adds to what was fixed in r366880. Specifically, it addresses the
following:
* chan_sip: dispose of an allocated frame in off nominal code paths in
sip_rtp_read
* func_odbc: when disposing of an allocated resultset, ensure that any rows
that were appended to that resultset are also disposed of
* cli: free the created return string buffer in another off nominal code
path
* chan_dahdi: free a frame that was allocated by the dsp layer if we choose
not to process that frame
Matthew Jordan [Fri, 18 May 2012 14:43:44 +0000 (14:43 +0000)]
Fix a variety of memory leaks
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
Kinsey Moore [Fri, 18 May 2012 14:21:37 +0000 (14:21 +0000)]
Reorder and renumber tests appropriately
It appears that a patch did not apply properly when adding tests 12 and
13 and test 11 was duplicated. These tests have been reordered and
renumbered such that they make sense.
........
Merged revisions 366882 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366884 from http://svn.asterisk.org/svn/asterisk/branches/10
Kinsey Moore [Thu, 17 May 2012 16:30:50 +0000 (16:30 +0000)]
Make the new SIP_CAUSE backend behave more like the original SIP_CAUSE
There was a slight discrepancy in the behaviors of the old SIP_CAUSE and the
new SIP_CAUSE/HANGUPCAUSE when a channel had been originated and had not yet
been answered. This caused the noload_res_srtp_attempt_srtp test to fail since
the SIP_CAUSE variable was never actually set. This behavior has been restored.
Jonathan Rose [Thu, 17 May 2012 16:28:20 +0000 (16:28 +0000)]
logger: Adds additional support for call id logging and chan_sip specific stuff
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
Jonathan Rose [Thu, 17 May 2012 14:42:49 +0000 (14:42 +0000)]
Blocked revisions 366792
........
chan_sip: Fix missed locking of opposing pvt for directmedia acl from r366547
It also required deadlock avoidance since two sip_pvts structs needed to be
locked simultaneously. Trunk handles it differently, so this is a 1.8 and 10
patch only.
........
Merged revisions 366791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Thu, 17 May 2012 13:21:19 +0000 (13:21 +0000)]
Fix checking bounds of array index after using it; improper sizeof
This patch fixes two problems pointed out by a static analysis tool.
* In chan_dahdi, when an event is handled the index of the sub channel is first
obtained. In very off nominal cases, the method that determines the index
can return a negative value. In the event handling code, whether or not
the index returned is valid was being checked after that value was used to
index into an array. This patch makes it so the value is checked before
any indexing is done.
* In res_calendar_ews, sizeof was being passed a pointer instead of the struct to
determine the amount of memory to allocate.
(issue ASTERISK-19651)
Reported by: Matt Jordan
(closes issue ASTERISK-19671)
Reported by: Matt Jordan
........
Merged revisions 366740 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366741 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Tue, 15 May 2012 19:36:26 +0000 (19:36 +0000)]
The predial routine must be run on the local;1 channel.
When ast_call() operates on a local channel, it copies a lot of things
from the local;1 channel to the local;2 channel. This includes among
other things, channel variables and party id information.
Other reasons it was a bad idea to run predial on the local;2 channel:
1) The channel has not been completely setup. The ast_call() completes
the setup.
2) The local;2 caller and connected line party information is opposite to
any other channels predial runs on. (And it hasn't been setup yet.)
* Partially back out -r366183 by removing the chan_local implementation of
the struct ast_channel_tech.pre_call callback.
Mark Michelson [Mon, 14 May 2012 20:15:33 +0000 (20:15 +0000)]
Fix two more coverity constant expression result findings.
These correspond to findings 0 and 1 in the core findings of
ASTERISK-19649.
After contacting Mark Spencer, he was unsure of what the intent
behind these lines of code were, so they are being axed.
For Asterisk 1.8 and 10, the output of debugging DUNDi frames
will not be changed, but for trunk the "Retry" portion will
be omitted since it does not properly distinguish retransmissions
from initial frames.
(closes issue ASTERISK-19649)
Reported by Matthew Jordan
........
Merged revisions 366409 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366412 from http://svn.asterisk.org/svn/asterisk/branches/10
Kinsey Moore [Mon, 14 May 2012 19:44:27 +0000 (19:44 +0000)]
Commit framework for HANGUPCAUSE (replacement for SIP_CAUSE)
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Mark Michelson [Mon, 14 May 2012 19:27:58 +0000 (19:27 +0000)]
Fix broken reinvite glare scenario.
To make a long story short, reinvite glares were broken
because Asterisk would invert the To and From headers
when ACKing a 491 response.
The reason was because the initreq of the dialog was being
changed to the incoming glared reinvite instead of being
set to the outgoing glared reinvite. This change has three
parts
* In handle_incoming, we never will reject an ACK because it
has a to-tag present, even if we think the request may be out
of dialog.
* In handle_request_invite, we do not change the initreq when
receiving a reinvite to which we will respond with a 491.
* In handle_request_invite, several superflous settings up
pendinginvite have been removed since this is dones automatically
by transmit_response_reliable
Russell Bryant [Sat, 12 May 2012 00:03:42 +0000 (00:03 +0000)]
format_mp3: Fix a possible crash in mp3_read().
This patch fixes a potential crash in mp3_read() by not assuming that
dbuf has enough data to finish filling up the output buffer. The patch
also makes sure that the dbuf state gets reset after we know we read
everything out of it already.
In passing, this patch includes some other cleanups of this module,
including stripping trailing whitespace, formatting fixes based on
coding guidelines, and removing a number of unused members from the
private state struct.
(closes issue ASTERISK-19761)
Reported by: Chris Maciejewsk
Tested by: Chris Maciejewsk
........
Merged revisions 366296 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366297 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Thu, 10 May 2012 21:29:41 +0000 (21:29 +0000)]
Run predial routine on local;2 channel where you would expect.
Before this patch, the predial routine executes on the ;1 channel of a
local channel pair. Executing predial on the ;1 channel of a local
channel pair is of limited utility. Any channel variables set by the
predial routine executing on the ;1 channel will not be available when the
local channel executes dialplan on the ;2 channel.
* Create ast_pre_call() and an associated pre_call() technology callback
to handle running the predial routine. If a channel technology does not
provide the callback, the predial routine is simply run on the channel.
Kinsey Moore [Thu, 10 May 2012 20:56:09 +0000 (20:56 +0000)]
Resolve FORWARD_NULL static analysis warnings
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
........
Merged revisions 366167 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366168 from http://svn.asterisk.org/svn/asterisk/branches/10
projects / thirdparty / asterisk.git / log
