Joshua Colp [Wed, 3 Feb 2016 18:02:01 +0000 (14:02 -0400)]
AST-2016-001 http: Provide greater control of TLS and set modern defaults.
This change exposes the configuration of various aspects of the TLS
support and sets the default to the modern standards.
The TLS cipher is now set to the best values according to the
Mozilla OpSec team, different TLS versions can now be disabled, and
the cipher order can be forced to be that of the server instead of
the client.
StefanEng86 [Fri, 29 Jan 2016 13:39:06 +0000 (14:39 +0100)]
chan_sip.c: AMI & CLI notify methods get different values of asterisk's own ip.
When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a)
AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect
asterisk to include the same value for its own ip in both cases a) and b),
but it seems a) produces a contact header like Contact:
<sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like
<sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf
My guess is that manager_sipnotify should call
ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does,
because after applying this patch, both cases a) and b) produce
the contact header that I expect: <sip:asterisk@192.168.1.227:8060>
Reported by: Stefan Engström
Tested by: Stefan Engström
George Joseph [Wed, 27 Jan 2016 16:29:13 +0000 (09:29 -0700)]
build_system: Prevent goals needing makeopts from running when it's missing
The Makefile only optionally includes makeopts so when goals like uninstall that
dont depend on anything else are run after a distclean, rules like
'rm -f "$(DESTDIR)$(ASTMODDIR)/"*' get run as 'rm -f ""/*' which attempts
to remove everything in the root directory.
Although there's a rule defined for makeopts which prints a message and does
an 'exit 1', since '-include makepopts' was specified (with the -), the exit
was ignored letting the rest of the rules run.
This patch makes makeopts required unless the goal has the string 'clean' in it.
ASTERISK-25730 #close Reported-by: George Joseph
Change-Id: I1bce59a7ea4f48e7a468e22b2abbb13c63417ac7
Rusty Newton [Mon, 25 Jan 2016 22:56:04 +0000 (16:56 -0600)]
sounds/Makefile: Incremented core and extra sounds versions to 1.5
Core and extra sounds 1.5 was recently released! The tarballs contain
change descriptions however I figure more people will see this one so
I'll try to be a bit detailed. Approximately 60 sounds were moved from Extra
to Core for en, en_GB, fr and added for languages that didn't already
have Extra sound sets (it,ja,ru).
In addition all of the English and Russian sounds have been completely
re-recorded.
Sounds moved and added:
activated,added,all-circuits-busy-now,astcc-followed-by-pound
at-tone-time-exactly,call-forwarding,call-fwd-no-ans,call-fwd-on-busy
,call-fwd-unconditional,calling,call-waiting,cancelled,
cannot-complete-as-dialed,check-number-dial-again,conf-full,de-activated
,disabled,do-not-disturb,enabled,enter-num-blacklist,entr-num-rmv-blklist
,extension,feature-not-avail-line,for,from-unknown-caller,goodbye,hello
,if-correct-press,im-sorry,info-about-last-call,is,is-in-use,is-set-to
,location,number,number-not-answering,num-was-successfully,one-moment-please
,please-try-again,pls-hold-while-try,pls-try-call-later,pm-invalid-option
,privacy-to-blacklist-last-caller,removed,simul-call-limit-reached
,something-terribly-wrong,sorry,sorry-youre-having-problems,speed-dial
,speed-dial-empty,telephone-number,time,to-call-this-number,to-extension
,to-listen-to-it,to-rerecord-it,unidentified-no-callback,with,you-entered
,your
There were also a few random fixes here and there to file names for a few
of the languages.
Corey Farrell [Mon, 25 Jan 2016 17:03:21 +0000 (12:03 -0500)]
chan_sip: Fix buffer overrun in sip_sipredirect.
sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer
of 256 characters. This patch reduces the copy to 255 characters to leave
room for the string null terminator.
Joshua Colp [Tue, 12 Jan 2016 17:14:29 +0000 (13:14 -0400)]
app: Queue hangup if channel is hung up during sub or macro execution.
This issue was exposed when executing a connected line subroutine.
When connected or redirected subroutines or macros are executed it is
expected that the underlying applications and logic invoked are fast
and do not consume frames. In practice this constraint is not enforced
and if not adhered to will cause channels to continue when they shouldn't.
This is because each caller of the connected or redirected logic does not
check whether the channel has been hung up on return. As a result the
the hung up channel continues.
This change makes it so when the API to execute a subroutine or
macro is invoked the channel is checked to determine if it has hung up.
If it has then a hangup is queued again so the caller will see it
and stop.
Kevin Harwell [Wed, 6 Jan 2016 19:03:28 +0000 (13:03 -0600)]
pbx: Deadlock between contexts container and context_merge locks
Recent changes (ASTERISK-25394 commit 2bd27d12223fe33b58c453965ed5c6ed3af7c4f5)
introduced the possibility of a deadlock. Due to the mentioned modifications
ast_change_hints now needs to keep both merge/delete and state callbacks from
occurring while it executes. Unfortunately, sometimes ast_change_hints can be
called with the contexts container locked. When this happens it's possible for
another thread to grab the context_merge_lock before the thread calling into
ast_change_hints does and then try to obtain the contexts container lock. This
of course causes a deadlock between the two threads. The thread calling into
ast_change_hints waits for the other thread to release context_merge_lock and
the other thread is waiting on that one to release the contexts container lock.
Unfortunately, there is not a great way to fix this problem. When hints change,
the subsequent state callbacks cannot run at the same time as a merge/delete,
nor when the usual state callbacks do. This patch alleviates the problem by
having those particular callbacks (the ones run after a hint change) occur in a
serialized task. By moving the context_merge_lock to a task it can now safely be
attempted or held without a deadlock occurring.
ASTERISK-25640 #close
Reported by: Krzysztof Trempala
include/asterisk/time.h: Renamed global declaration:tv
Renamed global declaration:tv to dummy_tv_var_for_types,
which would oltherwise cause 'shadow' warnings when 'tv'
was declared as a local variable elsewhere.
Added comment to note that dummy_tv_var_for_types is never
really exported and only used as a place holder.
Richard Mudgett [Thu, 7 Jan 2016 01:00:27 +0000 (19:00 -0600)]
ccss.c: Replace space in taskprocessor name.
The CLI "core ping taskprocessor" command does not work very
well with taskprocessor names that have spaces in them. You
have to put quotes around the name so using tab completion
becomes awkward.
Aaron An [Mon, 4 Jan 2016 10:26:55 +0000 (18:26 +0800)]
cel/cel_radius: Fix wrong pointer.
The macro ADD_VENDOR_CODE defined in the cel_radius.c should use the parameter
y not the address of y.
I capture the radius UDP packet via tcpdump, and the AV pairs are not correct,
then i review the source code and compare it with cdr/cdr_radius.c. Fix it and
it works.
ASTERISK-25647 #close
Reported by: Aaron An
Tested by: Aaron An
George Joseph [Tue, 5 Jan 2016 20:52:16 +0000 (13:52 -0700)]
asterisk.h: Add ASTERISK_REGISTER_FILE macro
The 11/13 branches and master use 2 different file version macros. 11/13
uses ASTERISK_FILE_VERSION but master uses ASTERISK_REGISTER_FILE. This
means a new file added to 11/13 can't just be cherry-picked to master
because the macro has to be changed.
To make cherry-picking possible, ASTERISK_REGISTER_FILE was added
to asterisk.h as a simple alias for ASTERISK_FILE_VERSION(__FILE__, NULL)
The "$Revision$" tag doesn't do anything since Asterisk moved to git so
just passing NULL as the verison works fine. asterisk.h was also
annotated to deprecate ASTERISK_FILE_VERSION and suggest using
ASTERISK_REGISTER_FILE for all new files.
Martin Tomec [Tue, 29 Dec 2015 11:44:29 +0000 (12:44 +0100)]
app_queue: Add member flag "in_call" to prevent reading wrong lastcall time
Member lastcall time is updated later than member status. There was chance to
check wrapuptime for available member with wrong (old) lastcall time.
New boolean flag "in_call" is set to true right before connecting call, and
reset to false after update of lastcall time. Members with "in_call" set to true
are treat as unavailable.
Richard Mudgett [Fri, 4 Dec 2015 23:22:29 +0000 (17:22 -0600)]
app_dial: Immediately exit dial if the caller is already hung up.
If a caller hangs up before dial is executed within an AGI then the AGI
has likely eaten all queued frames before executing the dial in DeadAGI
mode. With the caller hung up and no pending frames from the caller's
read queue, dial would not know that the call has hung up until a called
channel answers. It is rather annoying to whoever just answered the
non-existent call.
Dial should not continue execution in DeadAGI mode, hangup handlers, or
the h exten.
* Added a check early in dial to abort dialing if the caller has hungup.
ASTERISK-25307 #close
Reported by: David Cunningham
Joshua Colp [Mon, 28 Dec 2015 20:02:19 +0000 (16:02 -0400)]
test_time: Provide a timeout when waiting.
The test_timezone_watch unit test is written to expect a
condition to be signaled when the inotify daemon thread runs.
There exists a small window where the test_timezone_watch
thread can signal the inotify daemon thread while it is not
reading on the underlying file descriptor. If this occurs
the test_timezone_watch thread will wait indefinitely for a
signal that will never arrive.
This change adds a timeout to the condition so it will return
regardless after a period of time.
Dade Brandon [Fri, 25 Dec 2015 04:19:59 +0000 (20:19 -0800)]
res_http_websocket.c: prevent avoidable disconnections caused by write errors
Updated ast_websocket_write to encode the entire frame in to one
write operation, to ensure that we don't end up with a situation
where the websocket header has been sent, while the body can not
be written.
Previous to August's patch in commit b9bd3c14, certain network
conditions could cause the header to be written, and then the
sub-sequent body to fail - which would cause the next successful
write to contain a new header, and a new body (resulting in
the peer receiving two headers - the second of which would be
read as part of the body for the first header).
This was patched to have both write operations individually fail
by closing the websocket.
In a case available to the submitter of this patch, the same
body which would consistently fail to write, would succeed
if written at the same time as the header.
This update merges the two operations in to one, adds debug messages
indicating the reason for a websocket connection being closed during
a write operation, and clarifies some variable names for code legibility.
Dade Brandon [Fri, 25 Dec 2015 15:56:44 +0000 (07:56 -0800)]
chan_sip.c: fix websocket_write_timeout default value
websocket_write_timeout was not being set to its default value
during sip config reload, which meant that prior to this commit,
1) the default value of 100 was not used, unless an invalid value
(or 1) was specified in sip.conf for websocket_write_timeout, and
2) if the websocket_write_timeout directive was removed from sip.conf
without a full restart of asterisk, then the previous value would
continue to be used indefinitely.
This essentially lead to a 0ms write timeout (the first write attempt
in ast_careful_fwrite must have succeeded) in websocket write requests
from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf.
Changes to websocket_write_timeout still only apply to new websocket
sessions, after the sip reload -- timeouts on existing sessions are
not adjusted during sip reload.
Dade Brandon [Mon, 21 Dec 2015 03:33:02 +0000 (19:33 -0800)]
app_amd: Correct documentation to reflect functionality
Update documentation to reflect that maximum_number_of_words
has functionality inconsistent with the variable name (and inconsistent
with prior documentation.)
Update documentation for silence_threshold, which previously implied
that it was measuring time, rather than noise averages in the sample.
Dade Brandon [Fri, 18 Dec 2015 01:05:00 +0000 (17:05 -0800)]
res_rtp_asterisk: Resolve further timing issues with DTLS negotiation
Resolves an edge case dtls negotiation delay for certain networks which
somehow manage to drop the rtcp side's packet when these are both sent
ast_rtp_remote_address_set, causing it to have to time-out and restart
the handshake.
Move dtls pending bio flush in to it's own function, and call it from
ast_rtp_on_ice_complete, when we're rtp->ice, rather than when
ast_rtp_remote_address_set.
Keep the existing flush from the recent change to res_rtp_remote_address_set
if ice is not being used.
Carlos Oliva [Fri, 18 Dec 2015 15:54:41 +0000 (16:54 +0100)]
app_queue: update RT members when the 1st call joins a queue with no agents
If a call enters on a queue and the members on that queue are updated in
realtime (ex: using mysql inserting a new agent) the queue members are
never refreshed and the call will stay in the queue until other event occurs.
This happens only if this is the first call of the queue and there is no
agents servicing.
This patch prevent this issue, ensuring realtime members are updated if
there is one call in the queue and no available agents
server-pandora [Mon, 14 Dec 2015 19:53:20 +0000 (11:53 -0800)]
res_rtp_asterisk.c: Fix DTLS negotiation delays.
- Trigger pending DTLS packets to send out, once the RTP instance's remote
address is set.
- Avoids locking the DTLS structure unnecessarily by only doing this if
DTLS is passive.
- Add DTLS locks around the structurally sensitive calls in the SSL
portion of __rtp_recvfrom, since dtls_srtp_check_pending does not lock
inside of itself, and we're dealing with the SSL BIO in at least two
threads.
WebRTC channels may receive a DTLS handshake before
ast_rtp_remote_address_set is called, which causes there to be a pending
response to send out. Previous to 1ad827, this was handled by calling
dtls_srtp_check_pending on receipt of any RTP packet - a STUN or RTP
packet could trigger the pending handshake response. Since that was
rightfully removed, whenever the DTLS handshake is received before the
remote address is set, we would have to wait until another SSL packet
arrives.
As of Chrome M47's optimizations to their handshake process, WebRTC
conversations between Chrome M47+ and Asterisk, where Asterisk is passive,
experience a 1 second delay without this patch, because the SSL handshake
is received before ICE negotation stores the remote_address, and the next
SSL packet isn't received until after a 1 second timeout in Chrome, which
causes a new handshake request.
Matt Jordan [Sun, 13 Dec 2015 19:13:55 +0000 (13:13 -0600)]
main/utils: Don't emit an ERROR message if the read end of a pipe closes
An ERROR or WARNING message should generally indicate that something has gone
wrong in Asterisk. In the case of writing to a file descriptor, Asterisk is not
in control of when the far end closes its reading on a file descriptor. If the
far end does close the file descriptor in an unclean fashion, this isn't a bug
or error in Asterisk, particularly when the situation can be gracefully
handled in Asterisk.
Currently, when this happens, a user would see the following somewhat cryptic
ERROR message:
"utils.c: write() returned error: Broken pipe"
There's a few problems with this:
(1) It doesn't provide any context, other than 'something broke a pipe'
(2) As noted, it isn't actually an error in Asterisk
(3) It can get rather spammy if the thing breaking the pipe occurs often, such
as a FastAGI server
(4) Spammy ERROR messages make Asterisk appear to be having issues, or can even
mask legitimate issues
This patch changes ast_carefulwrite to only log an ERROR if we actually had one
that was reasonably under our control. For debugging purposes, we still emit
a debug message if we detect that the far side has stopped reading.
Jonathan Rose [Thu, 10 Dec 2015 17:44:03 +0000 (11:44 -0600)]
chan_sip: Add TCP/TLS keepalive to TCP/TLS server
Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously
this option was only being set on session sockets.
http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/
According to the link above, the SO_KEEPALIVE option is useful for knowing
when a TCP connected endpoint has severed communication without indicating
it or has become unreachable for some reason. Without this patch, keep
alive is not set on the socket listening for incoming TCP sessions and
in Komatsu's report this resulted in the thread listening for TCP becoming
stuck in a waiting state.
Eugene Voityuk [Wed, 2 Dec 2015 18:42:15 +0000 (20:42 +0200)]
chan_sip.c: Start ICE negotiation when response is sent or received.
The current logic for ICE negotiation starts it
when receiving an SDP with ICE candidates. This is
incorrect as ICE negotiation can only start when each
call party have at least one pair of local and remote
candidate. Starting ICE negotiation early would result
in negotiation failure and ultimately no audio.
This change makes it so ICE negotiation is only started
when a response with SDP is received or when a response
with SDP is sent.
Richard Mudgett [Fri, 4 Dec 2015 21:36:45 +0000 (15:36 -0600)]
chan_sip: Fix crash involving the bogus peer during sip reload.
A crash happens sometimes when performing a CLI "sip reload". The bogus
peer gets refreshed while it is in use by a new call which can cause the
crash.
* Protected the global bogus peer object with an ao2 global object
container.
Joshua Colp [Fri, 4 Dec 2015 14:15:24 +0000 (10:15 -0400)]
Fix crash in audiohook translate to slin
This patch fixes a crash which would occur when an audiohook was
applied to a channel using an audio codec that could not be translated
to signed linear (such as when using pass-through codecs like OPUS or
when the codec translator module for the format in use is not loaded).
Richard Mudgett [Mon, 30 Nov 2015 22:42:47 +0000 (16:42 -0600)]
sched.c: Make not return a sched id of 0.
According to the API doxygen a sched ID of 0 is valid. Unfortunately, 0
was never returned historically and several users incorrectly coded usage
of the returned sched ID assuming that 0 was invalid.
Richard Mudgett [Tue, 24 Nov 2015 18:44:53 +0000 (12:44 -0600)]
Audit improper usage of scheduler exposed by 5c713fdf18f.
channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
Kevin Harwell [Wed, 25 Nov 2015 21:26:35 +0000 (15:26 -0600)]
fastagi: record file closed after sending result
The fastagi record-file testsuite test sometimes fails reporting an empty
recorded file. This was happening because Asterisk was sending the agi result
notification prior to actually closing the file and the data, being buffered,
had not been written to the file yet when the test attempts to check the file
size.
This patch makes it so the record file stream is closed prior to sending the
agi result notification.
Walter Doekes [Wed, 25 Nov 2015 19:29:30 +0000 (20:29 +0100)]
main: Slight refactor of main. Improve color situation.
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
Joshua Colp [Sat, 14 Nov 2015 13:02:10 +0000 (09:02 -0400)]
hashtab: Add NULL check when destroying iterator.
The hashtab API is pretty NULL tolerant which has resulted
in remaining callers not doing much checks themselves.
Unfortunately the function to destroy an iterator does not
do a NULL check and will result in a crash if passed NULL.
This change fixes that.
Steve Davies [Wed, 11 Nov 2015 10:16:22 +0000 (10:16 +0000)]
Further fixes to improper usage of scheduler
When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
Alexander Traud [Tue, 10 Nov 2015 15:29:35 +0000 (16:29 +0100)]
rtp_engine: Init a format-attribute module to its RFC defaults.
Previously, format-attribute modules relied on an existing fmtp line in SDP
negotiation. However, fmtp is optional for several formats like the Opus Codec.
Now, the format-attribute module is called with an empty fmtp, which allows the
module to initialise itself to RFC defaults. Furthermore now, Asterisk is able
to differentiate between internally and externally created formats.
Walter Doekes [Fri, 6 Nov 2015 13:54:59 +0000 (14:54 +0100)]
func_callerid: Document that CALLERID(pres) is available.
CALLERPRES() says that it's deprecated in favor of CALLERID(num-pres)
and CALLERID(name-pres). But for channel driver that don't make a
distinction between the two (e.g. SIP), it makes more sense to get/set
both at once. This change reveals the availability of CALLERID(pres),
CONNECTEDLINE(pres), REDIRECTING(orig-pres), REDIRECTING(to-pres) and
REDIRECTING(from-pres).
Walter Doekes [Fri, 6 Nov 2015 13:36:40 +0000 (14:36 +0100)]
xmldoc: Improve xmldoc wrapping of 'core show ...' output.
Previously, the wrapping did both lookahead and lookback, which,
together with color escape sequences, caused some lines to be wrapped
way earlier than other lines. This led to inconsistent output.
This simplifies the wrapping code and makes it more sane: if maxcolumns
is hit, we simply jump back to the last space and wrap there.
Corey Farrell [Wed, 4 Nov 2015 14:25:52 +0000 (09:25 -0500)]
Fix cli display of build options.
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
Alexander Traud [Wed, 21 Oct 2015 13:06:29 +0000 (15:06 +0200)]
format: Update the maximum packetization time for iLBC 30.
In September 2006, the maximum packetization time (ptime) were set to such a
low value, packetization was disabled for many codecs actually. This was fixed
for many codecs but not for iLBC 30. This enables packetization for iLBC which
can be enabled for example via allow=ilbc:60,gsm,alaw,ulaw in the file sip.conf.
On v13, loading several thousand PJSIP endpoints on Asterisk start causes
a deadlock most of the time.
Thanks to mdu113 for discovering that there was a call to pgsql_exec() not
protected by the pgsql_lock reentrancy lock.
{quote}
I believe a code path exists that attempts to use pgsql connection without
locking pgsql_lock. I believe what happens during that deadlock that I
see is two concurrent threads are both attempting to send query to pgsql,
one of the thread is using a code path without locking pgsql_lock. If
they managed to send queries at the same time, it seems postgres ignores
one of the queries and replies only to the one of them. If it happens so
that the thread holding the lock didn't receive the reply it will wait for
it (and hold the lock) forever (or at least for very long time), thus
completely blocking all access to db.
{quote}
* Added missing reentrancy locking around pgsql_exec() in find_table().
* Moved unlock of pgsql_lock in unload_module() to avoid locking inversion
between the psql_tables list lock and the pgsql_lock.
Richard Mudgett [Mon, 12 Oct 2015 16:20:29 +0000 (11:20 -0500)]
config.c: Fix potential memory corruption after [section](+).
The memory corruption could happen if the [section](+) is the last section
in the file with trailing comments. In this case process_text_line() has
left *last_cat is set to newcat and newcat is destroyed.
Richard Mudgett [Mon, 12 Oct 2015 16:21:55 +0000 (11:21 -0500)]
config.c: Fix #include after [section](+).
An #include right after a [section](+) would associate any variable
assignments before a new section in the #include with the wrong section.
* Fix section association by setting the current section to the appended
section.
* Fix '+' and '!' section flag interaction corner case depending upon
which flag came first. If the '!' came first then it would be ignored.
If the '!' came after then it would affect the appended section. The '!'
will now no longer be ignored.
Matt Jordan [Wed, 7 Oct 2015 01:43:58 +0000 (20:43 -0500)]
res/res_rtp_asterisk: Fix assignment after ao2 decrement
When we decide we will no longer schedule an RTCP write, we remove the
reference to the RTP instance, then assign -1 to the stored scheduler ID
in case something else comes along and wants to see if anything is scheduled.
That scheduler ID is on the RTP instance. After 60a9172d7ef2 was merged to
fix the regression introduced by 3cf0f29310, this improper assignment on a
potentially destroyed object started getting tripped on the build agents.
Frankly, this should have been crashing a lot more often earlier. I can only
assume that the timing was changed just enough by both changes to start
actually hitting this problem.
As it is, simply moving the assignment prior to the ao2 deference is sufficient
to keep the RTP instance from being referenced when it is very, truly,
aboslutely dead.
(Note that it is still good practice to assign -1 to the scheduler ID when we
know we won't be scheduling it again, as the ao2 deref *may* not always destroy
the ao2 object.)
chan_sip: Fix port parsing for IPv6 addresses in SIP Via headers.
If a Via header containes an IPv6 address and a port number is ommitted,
as it is the standard port, we now leave the port empty and to not set it
to the value after the first colon of the IPv6 address.
Matt Jordan [Tue, 6 Oct 2015 02:34:41 +0000 (21:34 -0500)]
Fix improper usage of scheduler exposed by 5c713fdf18f
When 5c713fdf18f was merged, it allowed for scheduled items to have an ID of
'0' returned. While this was valid per the documentation for the API, it was
apparently never returned previously. As a result, several users of the
scheduler API viewed the result as being invalid, causing them to reschedule
already scheduled items or otherwise fail in interesting ways.
This patch corrects the users such that they view '0' as valid, and a returned
ID of -1 as being invalid.
Note that the failing HEP RTCP tests now pass with this patch. These tests
failed due to a duplicate scheduling of the RTCP transmissions.
Ivan Poddubny [Sat, 3 Oct 2015 11:27:27 +0000 (14:27 +0300)]
manager: Fix GetConfigJSON returning invalid JSON
When GetConfigJSON was introduced back in 1.6, it returned each
section as an array of strings: ["key=value", "key2=value2"].
Afterwards, it was changed a few times and became
["key": "value", "key2": "value2"], which is not a correct JSON.
This patch fixes that by constructing a JSON object {} instead of
an array [].
projects / thirdparty / asterisk.git / log
