Gianluca Merlo [Sat, 19 Mar 2016 12:34:26 +0000 (13:34 +0100)]
config: fix flags in uint option handler
The configuration unsigned integer option handler sets flags for the
parser as if the option should be a signed integer (PARSE_INT32),
leading to errors on "out of range" values. Fix flags (PARSE_UINT32).
A fix to res_pjsip is also present which stops invalid flags from
being passed when registering sorcery object fields for qualify
status.
Mark Michelson [Thu, 10 Mar 2016 22:58:49 +0000 (16:58 -0600)]
Restrict CLI/AMI commands on shutdown.
During stress testing, we have frequently seen crashes occur because a
CLI or AMI command attempts to access information that is in the process
of being destroyed.
When addressing how to fix this issue, we initially considered fixing
individual crashes we observed. However, the changes required to fix
those problems would introduce considerable overhead to the nominal
case. This is not reasonable in order to prevent a crash from occurring
while Asterisk is already shutting down.
Instead, this change makes it so AMI and CLI commands cannot be executed
if Asterisk is being shut down. For AMI, this is absolute. For CLI,
though, certain commands can be registered so that they may be run
during Asterisk shutdown.
Walter Doekes [Thu, 24 Mar 2016 12:45:06 +0000 (13:45 +0100)]
musiconhold: Only warn if music class is not found in memory and database.
The log message when a MusicOnHold music class was not found was changed
from debug level to WARNING level in Asterisk 11.19 and 13.5. For those
using realtime musiconhold, this message is wrong because it warns
before checking the database.
This changeset delays the warning until after the database has been
checked.
Walter Doekes [Thu, 24 Mar 2016 10:38:16 +0000 (11:38 +0100)]
core/logging: Fix broken syslog levels on older glibc.
The fix to ASTERISK-25407 introduced the usage of LOG_MAKEPRI. However
this macro is broken in older glibc (< 2.17); it would left-shift the
facility a second time, causing the resultant priority to become
invalid.
The syslog manpage mentions nothing about LOG_MAKEPRI and suggests this:
The priority argument is formed by ORing the facility and the level
values [...].
chan_sip.c: Space after port causes unnecessary resolution attempt
check_via() already skips leading blanks where the sent-by address (with the
optional port) should be placed.
Since RFC 3261 allows for blanks between the port ant the Via parameters:
> https://tools.ietf.org/html/rfc3261#section-20.42
(actually it allows a lot of blanks more ;-)). I just switched from
ast_skip_blanks() to ast_strip() on the local copy of the string.
Gianluca Merlo [Sat, 19 Mar 2016 01:32:51 +0000 (02:32 +0100)]
func_aes: fix misuse of strlen on binary data
The encryption code for AES_ENCRYPT evaluates the length of the data to
be encoded in base64 using strlen. The data is binary, thus the length
of it can be underestimated at the first NULL character.
Reuse the write pointer offset to evaluate it, instead.
Kevin Harwell [Wed, 16 Mar 2016 17:37:01 +0000 (12:37 -0500)]
chan_pjsip: transfers with direct media reinvite has wrong address/port
During a transfer involving direct media a race occurs between when the
transferer channel is swapped out, initiating rtp changes/updates, and the
subsequent reinvites.
When Alice, after speaking with Charlie (Bob is on hold), connects Bob and
Charlie invites are sent to each in order to establish the call between them.
Bob is taken off hold and Charlie is told to have his media flow through
Asterisk. However, if before those invites go out the bridge updates Bob's
and/or Charlie's rtp information with direct media data (i.e. address, port)
then the invite(s) will contain the remote data in the SDP instead of the
Asterisk data.
The race occurs in the native bridge glue code when updating the peer. The
direct_media_address can get set twice before sending out the first invite
during call connection. This can happen because the checking/setting of the
direct_media_address happened in one thread while the sending of the invite(s)
happened in another thread.
This fix removes the race condition by moving the checking/setting of the
direct_media_address to be in the same thread as the sending of the invites(s).
This serializes the checking/setting and sending so they can no longer happen
out of order.
install_prereq: Update repositories before install on Debian systems
When to install packages the indexed local is more old of the
version of software on the repository they have been upgraded by security
update then get the package will give 404 not found.
The patch prevent by update local index to repository for aptitude before
install.
install_prereq: Check if is installed aptitude otherwise to install.
If in Debian or system based, dont have aptitude installed the script do
nothing. This patch checked if aptitude installed, if not installed.
Also, if execute script with all packages installed yet, the script not show
nothing and return exit 1 because the command 'grep' get nothing from pipe from
'awk'.
res_pjsip_refer.c: Fix seg fault in process of Refer-to header.
The "Refer-to" header of an incoming REFER request is parsed by
pjsip_parse_uri(). That function requires the URI parameter to be NULL
terminated. Unfortunately, the previous code added the NULL terminator by
overwriting memory that may not be safe. The overwritten memory results
could be benign, memory corruption, or a segmentation fault. Now the URI
is NULL terminated safely by copying the URI to a new chunk of memory with
the correct size to be NULL terminated.
Richard Mudgett [Fri, 11 Mar 2016 18:22:48 +0000 (12:22 -0600)]
chan_sip.c: Fix mwi resub deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
Richard Mudgett [Thu, 10 Mar 2016 23:01:12 +0000 (17:01 -0600)]
chan_sip.c: Fix registration timeout and expire deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
Richard Mudgett [Thu, 10 Mar 2016 18:17:09 +0000 (12:17 -0600)]
chan_sip.c: Fix t38id deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
Richard Mudgett [Wed, 9 Mar 2016 22:34:53 +0000 (16:34 -0600)]
chan_sip.c: Fix reinviteid deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Fix retrans_pkt() to call check_pendings() with both the owner channel
and the private objects locked as required.
* Refactor dialog retransmission packet list to safely remove packet
nodes. The list nodes are now ao2 objects. The list has a ref and the
scheduled entry has a ref.
Richard Mudgett [Wed, 9 Mar 2016 22:26:26 +0000 (16:26 -0600)]
chan_sip.c: Fix waitid deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Made always run check_pendings() under the scheduler thread so scheduler
ids can be checked safely.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
Richard Mudgett [Mon, 7 Mar 2016 19:21:44 +0000 (13:21 -0600)]
chan_sip.c: Fix autokillid deadlock potential.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Fix clearing autokillid in __sip_autodestruct() even though we could
reschedule.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
Richard Mudgett [Fri, 11 Mar 2016 03:54:03 +0000 (21:54 -0600)]
chan_sip.c: Clear scheduled immediate events on unload.
This patch is part of a series to resolve deadlocks in chan_sip.c.
The reordering of chan_sip's shutdown is to handle any immediate events
that get put onto the scheduler so resources aren't leaked. The typical
immediate events at this time are going to be concerned with stopping
other scheduled events.
This patch is part of a series to resolve deadlocks in chan_sip.c.
Delaying destruction of the chan_sip sip_pvt structures caused the
/channels/chan_sip/test_sip_rtpqos unit test to crash. That test
registers a special test ast_rtp_engine with the rtp engine module. When
the unit test completes it cleans up by unregistering the test
ast_rtp_engine and exits. Since the delayed destruction of the sip_pvt
happens after the unit test returns, the destructor tries to call the rtp
engine destroy callback of the test ast_rtp_engine auto variable which no
longer exists on the stack.
* Change the test ast_rtp_engine auto variable to a static variable. Now
the variable can still exist after the unit test exits so the delayed
sip_pvt destruction can complete successfully.
Joshua Colp [Mon, 14 Mar 2016 13:59:10 +0000 (10:59 -0300)]
build: Add configure check for proto field of PJSIP TLS transport setting.
Older versions of PJSIP do not have the proto field on the TLS transport
setting structure. This change adds a configure check so even if it is
not present we will still be able to build.
George Joseph [Sat, 12 Mar 2016 22:02:20 +0000 (15:02 -0700)]
build_system: Split COMPILE_DOUBLE from DONT_OPTIMIZE
I can't ever recall actually needing the intermediate files or the checking
that a double compile produces. What I CAN remember is every DONT_OPTIMIZE
build needing 3 invocations of gcc instead of 1 just to do the checks and
produce those intermediate files.
Having said that, Richard pointed out that the reason for the double compile
was that there were cases in the past where a submitted patch failed to compile
because the submitter never tried it with the optimizations turned on.
To get the best of both worlds, COMPILE_DOUBLE has been split into its own
option. If DONT_OPTIMIZE is turned on, COMPILE_DOUBLE will also be selected
BUT you can then turn it off if all you need are the debugging symbols. This
way you have to make an informed decision about disabling COMPILE_DOUBLE.
To allow COMPILE_DOUBLE to be both auto-selected and turned off, a new feature
was added to menuselect. The <use> element can now contain an "autoselect"
attribute which will turn the used member on but not create a hard dependency.
The cflags.xml implementation for COMPILE_DOUBLE looks like this...
When DONT_OPTIMIZE is turned on, COMPILE_DOUBLE is turned on because
of the use.
When DONT_OPTIMIZE is turned off, COMPILE_DOUBLE is turned off because
of the depend.
When COMPILE_DOUBLE is turned on, DONT_OPTIMIZE is turned on because
of the depend.
When COMPILE_DOUBLE is turned off, DONT_OPTIMIZE is left as is because
it only uses COMPILE_DOUBLE, it doesn't depend on it.
I also made a few tweaks to the ncurses implementation to move things
left a bit to allow longer descriptions.
George Joseph [Thu, 10 Mar 2016 19:09:13 +0000 (12:09 -0700)]
pjproject: Pass (dont_)optimize flags to pjproject and fix pjsua
The pjproject Makefile now uses the Asterisk optimization flags which
are determined by the setting of the DONT_OPTMIZE menuselect flag.
The Makefile was also restructured so a change to the top level
menuselect.makeopts will result in a rebuild of pjproject.
Also, "--disable-resample" was removed from the pjproject configure
options. Without resample, pjsua (which is used by the testsuite)
can't make audio calls. When it can't, it segfaults.
Walter Doekes [Fri, 11 Mar 2016 22:03:08 +0000 (23:03 +0100)]
app_chanspy: Fix occasional deadlock with ChanSpy and Local channels.
Channel masquerading had a conflict with autochannel locking.
When locking autochannel->channel, the channel is fetched from the
autochannel and then locked. During the fetch, the autochannel -- which
has no locks itself -- can be modified by someone who owns the channel
lock. That means that the value of autochan->channel cannot be trusted
until you hold the lock.
In practice, this caused problems with Local channels getting
masqueraded away while the ChanSpy attempted to get info from that
channel. The old channel which was about to get removed got locked, but
the new (replaced) channel got unlocked (no-op). Because the replaced
channel was now locked (and would never get unlocked), it couldn't get
removed from the channel list in a timely manner, and would now cause
deadlocks when iterating over the channel list.
This change checks the autochannel after locking the channel for changes
to the autochannel. If the channel had been changed, the lock is
reobtained on the new channel.
In theory it seems possible that after this fix, the lock attempt on the
old (wrong) channel can be on an already destroyed lock, maybe causing
a crash. But that hasn't been observed in the wild and is harder induce
than the current deadlock.
Thanks go to Filip Frank for suggesting a fix similar to this and
especially to IRC user hexanol for pointing out why this deadlock was
possible and testing this fix. And to Richard for catching my rookie
while loop mistake ;)
George Joseph [Sun, 6 Mar 2016 20:38:41 +0000 (13:38 -0700)]
res_pjsip: Strip spaces from items parsed from comma-separated lists
Configurations like "aors = a, b, c" were either ignoring everything after "a"
or trying to look up " b". Same for mailboxes, ciphers, contacts and a few
others.
George Joseph [Wed, 24 Feb 2016 23:25:09 +0000 (16:25 -0700)]
res_pjsip_caller_id: Anonymize 'From' when caller id presentation is prohibited
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
George Joseph [Sat, 23 Jan 2016 21:50:57 +0000 (14:50 -0700)]
loader: Retry dlopen when loading fails
Although we use the RTLD_LAZY flag when calling dlopen
the first time on a module, this only defers resolution
for function calls. Pointer references to functions are
determined at link time so dlopen expects them to be there.
Since we don't cross-module link, pointers to functions
in other modules won't be available and dlopen will fail.
Doing a "hardened" build also causes problems because it
typically sets "-z now" on the ld command line which
overrides RTLD_LAZY at run time.
If the failing module isn't a GLOBAL_SYMBOLS module, then
dlopen will be called again after all the GLOBAL_SYMBOLS
modules have been loaded and they'll eventually resolve.
If the calling module IS a GLOBAL_SYMBOLS module itself
and a third module depends on it, then there's an issue
because the second time through the dlopen loop,
GLOBAL_SYMBOLS modules aren't given any special treatment
and since the order in which dlopen is called isn't
deterministic, the dependent may again be tried before the
module it needs is loaded.
Simple solution: Save modules that fail load_resource
because of a dlopen error in a list and retry them
immediately after the first pass. Keep retrying until
the failed list is empty or we reach a #defined max
retries. Error messages are suppressed until the final
pass which also gets rid of those confusing error messages
about module failures that are later corrected.
Kevin Harwell [Tue, 1 Mar 2016 22:18:21 +0000 (16:18 -0600)]
bridge.c: Crash during attended transfer when missing a local channel half
It's possible for the transferer channel to get hung up early during the
attended transfer process. For instance, a phone may send a "bye" immediately
upon receiving a sip notify that contains a sip frag 100 (I'm looking at you
Jitsi). When this occurs a race begins between the transferer being hung up
and completion of the transfer code.
If the channel hangs up too early during a transfer involving stasis bridging
for instance, then when the created local channel goes to look up its swap
channel (and associated datastore) it can't find it (since it is no longer in
the bridge) thus it fails to enter the stasis application. Consequently, the
created local channel(s) hang up as well. If the timing is just right then the
bridging code attempts to add the message link with missing local channel(s).
Hence the crash.
Unfortunately, there is no great way to solve the problem of the unexpected
"bye". While we can't guarantee we won't receive an early hangup, and in this
case still fail to enter the stasis application, we can make it so asterisk
does not crash.
This patch does just that by locking the local channel structure, checking
that the local channel's peer has not been lost, and then continuing. This
keeps the local channel's peer from being ripped out from underneath it by
the local/unreal hangup code while attempting to set the stasis message link.
Kevin Harwell [Wed, 2 Mar 2016 00:08:52 +0000 (18:08 -0600)]
res_pjsip_refer.c: Delay sending the initial SIP Notify with frag 100
During the transfer process, some phones (okay it was the Jitsi softphone,
but maybe others are out there) send a "bye" immediately after receiving a
SIP Notify. When a "bye" is received early for some types of transfers the
transferer channel may no longer be available during late stage transfer
processing.
For instance, during an attended transfer involving stasis bridging at one
point the created local channel looks for an associated swap channel in
order to retrieve the stasis application name. If the transferer has hung
up then the local channel will fail to find it. The local channel then has
no way to know which stasis app to enter, so it fails and hangs up as well.
Thus the transfer does not complete as expected.
This patch delays the sending of the initial notify in order to give the
transfer process enough time to gather the necessary data for a successful
transfer.
Joshua Colp [Thu, 3 Mar 2016 14:26:10 +0000 (10:26 -0400)]
res_pjsip_dtmf_info: NULL terminate the message body.
PJSIP does not ensure that when printing the message body the
buffer will be NULL terminated. This is problematic when searching
for the signal and duration values of the DTMF.
This change ensures the buffer is always NULL terminated.
George Joseph [Wed, 2 Mar 2016 02:03:04 +0000 (19:03 -0700)]
alembic: Fix downgrade and tweak for sqlite
Downgrade had a few issues. First there was an errant 'update' statement in
add_auto_dtmf_mode that looks like it was a copy/paste error. Second, we
weren't cleaning up the ENUMs so subsequent upgrades on postgres failed
because the types already existed.
For sqlite... sqlite doesn't support ALTER or DROP COLUMN directly.
Fortunately alembic batch_operations takes care of this for us if we
use it so the alter and drops were converted to use batch operations.
Here's an example downgrade:
with op.batch_alter_table('ps_endpoints') as batch_op:
batch_op.drop_column('tos_audio')
batch_op.drop_column('tos_video')
batch_op.add_column(sa.Column('tos_audio', yesno_values))
batch_op.add_column(sa.Column('tos_video', yesno_values))
batch_op.drop_column('cos_audio')
batch_op.drop_column('cos_video')
batch_op.add_column(sa.Column('cos_audio', yesno_values))
batch_op.add_column(sa.Column('cos_video', yesno_values))
with op.batch_alter_table('ps_transports') as batch_op:
batch_op.drop_column('tos')
batch_op.add_column(sa.Column('tos', yesno_values))
# Can't cast integers to YESNO_VALUES, so dropping and adding is required
batch_op.drop_column('cos')
batch_op.add_column(sa.Column('cos', yesno_values))
Upgrades from base to head and downgrades from head to base were tested
repeatedly for postgresql, mysql/mariadb, and sqlite3.
George Joseph [Wed, 2 Mar 2016 21:55:48 +0000 (14:55 -0700)]
config_transport: Fix objects returned by ast_sip_get_transport_states
ast_sip_get_transport_states was returning a container of internal_state
objects instead of ast_sip_transport_state objects. This was causing
transport lookups to fail, most noticably in res_pjsip_nat, which
couldn't find the correct external addresses. This was causing contacts
to go out with internal ip addresses.
ASTERISK-25830 #close Reported-by: Sean Bright
Change-Id: I1aee6a2fd46c42e8dd0af72498d17de459ac750e
Richard Mudgett [Sat, 27 Feb 2016 00:57:17 +0000 (18:57 -0600)]
SIP diversion: Fix REDIRECTING(reason) value inconsistencies.
Previous chan_sip behavior:
Before this patch chan_sip would always strip any quotes from an incoming
reason and pass that value up as the REDIRECTING(reason). For an outgoing
reason value, chan_sip would check the value against known values and
quote any it didn't recognize. Incoming 480 response message reason text
was just assigned to the REDIRECTING(reason).
Previous chan_pjsip behavior:
Before this patch chan_pjsip would always pass the incoming reason value
up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip
would send the reason value as passed down.
With this patch:
Both channel drivers match incoming reason values with values documented
by REDIRECTING(reason) and values documented by RFC5806 regardless of
whether they are quoted or not. RFC5806 values are mapped to the
equivalent REDIRECTING(reason) documented value and is set in
REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a
quoted string version ('"unconditional"') is converted to
REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal
with 'cfu' instead of any of the aliases.
The incoming 480 response reason text supported by chan_sip checks for
known reason values and if not matched then puts quotes around the reason
string and assigns that to REDIRECTING(reason).
Both channel drivers send outgoing known REDIRECTING(reason) values as the
unquoted RFC5806 equivalent. User custom values are either sent as is or
with added quotes if SIP doesn't allow a character within the value as
part of a RFC3261 Section 25.1 token. Note that there are still
limitations on what characters can be put in a custom user value. e.g.,
embedding quotes in the middle of the reason string is silly and just
going to cause you grief.
* Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases.
e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the
'cfu' value.
* Added missing malloc() NULL return check in res_pjsip_diversion.c
set_redirecting_reason().
* Fixed potential read from a stale pointer in res_pjsip_diversion.c
add_diversion_header(). The reason string needed to be copied into the
tdata memory pool to ensure that the string would always be available.
Otherwise, if the reason string returned by reason_code_to_str() was a
user's reason string then the string could be freed later by another
thread.
* Fix double unref of other_party channel in off nominal path.
* This is unlikely to be a real problem. However, for safety,
in handle_incoming_request() keep the datastore ref with the
other_party channel ref until we are finished with the other_party
channel.
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Richard Mudgett [Mon, 22 Feb 2016 22:59:40 +0000 (16:59 -0600)]
chan_sip.c: Fix T.38 issues caused by leaving a bridge.
chan_sip could not handle AST_T38_TERMINATED frames being sent to it when
the channel left the bridge. The action resulted in overlapping outgoing
reINVITEs. The testsuite tests/fax/sip/directmedia_reinvite_t38 was not
happy.
* Force T.38 to be remembered as locally bridged. Now when the channel
leaves the native RTP bridge after T.38, the channel remembers that it has
already reINVITEed the media back to Asterisk. It just needs to terminate
T.38 when the AST_T38_TERMINATED arrives.
* Prevent redundant AST_T38_TERMINATED from causing problems. Redundant
AST_T38_TERMINATED frames could cause overlapping outgoing reINVITEs if
they happen before the T.38 state changes to disabled. Now the T.38 state
is set to disabled before the reINVITE is sent.
Richard Mudgett [Fri, 19 Feb 2016 00:27:02 +0000 (18:27 -0600)]
res_pjsip_t38.c: Back out part of an earlier fix attempt.
This backs out item 4 of the 4875e5ac32f5ccad51add6a4216947bfb385245d
commit. Item 4 added the t38_bye_supplement. Unfortunately, the frame
that it puts into the bridge may or may not be processed by the time the
bridged peer is kicked out of the bridge. If it is processed then all is
well. However, if it is not processed then that channel is stuck in fax
mode until it hangs up or maybe if it joins another bridge for T.38
faxing.
Richard Mudgett [Sat, 20 Feb 2016 01:06:14 +0000 (19:06 -0600)]
bridge_channel: Don't settle owed events on an optimization.
Local channel optimization could cause DTMF digits to be duplicated.
Pending DTMF end events would be posted to a bridge when the local channel
optimizes out and is replaced by the channel further down the chain. When
the real digit ends, the channel would get another DTMF end posted to the
bridge.
A -- LocalA;1/n -- LocalA;2/n -- LocalB;1 -- LocalB;2 -- B
1) LocalA has the /n flag to prevent optimization.
2) B is sending DTMF to A through the local channel chain.
3) When LocalB optimizes out it can move B to the position of LocalB;1
4) Without this patch, when B swaps with LocalB;1 then LocalB;1 would
settle an owed DTMF end to the bridge toward LocalA;2.
5) When B finally ends its DTMF it sends the DTMF end down the chain.
6) Without this patch, A would hear the DTMF digit end when LocalB
optimizes out and when B ends the original digit.
Richard Mudgett [Mon, 22 Feb 2016 18:15:34 +0000 (12:15 -0600)]
channel.c: Route all control frames to a channel through the same code.
Frame hooks can conceivably return a control frame in exchange for an
audio frame inside ast_write(). Those returned control frames were not
handled quite the same as if they were sent to ast_indicate(). Now it
doesn't matter if you use ast_write() to send an AST_FRAME_CONTROL to a
channel or ast_indicate().
George Joseph [Thu, 25 Feb 2016 21:13:19 +0000 (14:13 -0700)]
sorcery: Refactor create, update and delete to better deal with caches
The ast_sorcery_create, update and delete function have been refactored
to better deal with caches and errors.
The action is now called on all non-caching wizards first. If ANY succeed,
the action is called on all caching wizards and the observers are notified.
This way we don't put something in the cache (or update or delete) before
knowing the action was performed in at least 1 backend and we only call the
observers once even if there were multiple writable backends.
ast_sorcery_create was never adding to caches in the first place which
was preventing contacts from getting added to a memory_cache when they
were created. In turn this was causing memory_cache to emit errors if
the contact was deleted before being retrieved (which would have
populated the cache).
ASTERISK-25811 #close Reported-by: Ross Beer
Change-Id: Id5596ce691685a79886e57b0865888458d6e7b46
George Joseph [Thu, 25 Feb 2016 21:39:54 +0000 (14:39 -0700)]
res_pjsip_mwi: Turn some NOTICEs and WARNINGs into debug 1s.
There are a few cases where we're emitting notices or warnings
for things that really need neither, like a client retrying to subscribe
to mwi when they're not conifgured for it. They get a 404 so there's no
need for non-debug messages.
projects / thirdparty / asterisk.git / log
