to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.
Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.
This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).
Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.
Hence the inode LSN in the log dinode is -always- invalid.
Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.
Looking back at the change history, the inode logging was broken by
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.
Before 93f958f9c41f, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.
A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:
You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.
The fix for this is two-fold. The first is that we need to either
revert the LSN changes in 93f958f9c41f or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.
I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.
However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.
Fixes: 93f958f9c41f ("xfs: cull unnecessary icdinode fields") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
While auditing the realtime growfs code, I realized that the GROWFSRT
ioctl (and by extension xfs_growfs) has always allowed sysadmins to
change the realtime extent size when adding a realtime section to the
filesystem. Since we also have always allowed sysadmins to set
RTINHERIT and EXTSZINHERIT on directories even if there is no realtime
device, this invalidates the premise laid out in the comments added in
In other words, this is not a case of inadequate metadata validation.
This is a case of nearly forgotten (and apparently untested) but
supported functionality. Update the comments to reflect what we've
learned, and remove the log message about correcting the misalignment.
Fixes: 603f000b15f2 ("xfs: validate extsz hints against rt extent size when rtinherit is set") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
While running xfs/168, I noticed occasional write verifier shutdowns
involving inodes at the very end of the filesystem. Existing inode
btree validation code checks that all inode clusters are fully contained
within the filesystem.
However, due to inadequate checking in the fs shrink code, it's possible
that there could be a sparse inode cluster at the end of the filesystem
where the upper inodes of the cluster are marked as holes and the
corresponding blocks are free. In this case, the last blocks in the AG
are listed in the bnobt. This enables the shrink to proceed but results
in a filesystem that trips the inode verifiers. Fix this by disallowing
the shrink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fallthrough */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fallthrough */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
A recent bug report generated a warning that a code path in
xfs_attr_remove_iter could potentially return error uninitialized in the
case of XFS_DAS_RM_SHRINK state. Fix this by initializing error.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <bodonnel@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The AGI buffer is in big-endian format, so we must convert the
endianness to CPU format to do any comparisons.
Fixes: 46141dc891f7 ("xfs: introduce xfs_ag_shrink_space()") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
In doing an investigation into AIL push stalls, I was looking at the
log force code to see if an async CIL push could be done instead.
This lead me to xfs_log_force_lsn() and looking at how it works.
xfs_log_force_lsn() is only called from inode synchronisation
contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn
value as the LSN to sync the log to. This gets passed to
xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the
journal, and then used by xfs_log_force_lsn() to flush the iclogs to
the journal.
The problem is that ip->i_itemp->ili_last_lsn does not store a
log sequence number. What it stores is passed to it from the
->iop_committing method, which is called by xfs_log_commit_cil().
The value this passes to the iop_committing method is the CIL
context sequence number that the item was committed to.
As it turns out, xlog_cil_force_lsn() converts the sequence to an
actual commit LSN for the related context and returns that to
xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn"
variable that contained a sequence with an actual LSN and then uses
that to sync the iclogs.
This caused me some confusion for a while, even though I originally
wrote all this code a decade ago. ->iop_committing is only used by
a couple of log item types, and only inode items use the sequence
number it is passed.
Let's clean up the API, CIL structures and inode log item to call it
a sequence number, and make it clear that the high level code is
using CIL sequence numbers and not on-disk LSNs for integrity
synchronisation purposes.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We don't need to look at the xfs_mount and superblock every time we
need to do an iclog roundoff calculation. The property is fixed for
the life of the log, so store the roundoff in the log at mount time
and use that everywhere.
On a debug build:
$ size fs/xfs/xfs_log.o.*
text data bss dec hex filename
27360 560 8 27928 6d18 fs/xfs/xfs_log.o.orig
27219 560 8 27787 6c8b fs/xfs/xfs_log.o.patched
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The patch 7b13c5155182: "xfs: use perag for ialloc btree cursors"
from Jun 2, 2021, leads to the following Smatch complaint:
fs/xfs/libxfs/xfs_ialloc.c:2403 xfs_imap()
error: we previously assumed 'pag' could be null (see line 2294)
And it's right. Fix it.
Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch renames the following functions to make the nameing scheme more consistent:
xfs_attr_shortform_remove -> xfs_attr_sf_removename
xfs_attr_node_remove_name -> xfs_attr_node_removename
xfs_attr_set_fmt -> xfs_attr_sf_addname
Suggested-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This ASSERT checks for the state value of RM_SHRINK in the set path
which should never happen. Change to ASSERT(0);
Suggested-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Stephen Rothwell reported this compiler warning from linux-next:
fs/xfs/libxfs/xfs_ialloc.c: In function 'xfs_difree_finobt':
fs/xfs/libxfs/xfs_ialloc.c:2032:20: warning: unused variable 'agi' [-Wunused-variable]
2032 | struct xfs_agi *agi = agbp->b_addr;
Which is fallout from agno -> perag conversions that were done in
this function. xfs_check_agi_freecount() is the only user of "agi"
in xfs_difree_finobt() now, and it only uses the agi to get the
current free inode count. We hold that in the perag structure, so
there's not need to directly reference the raw AGI to get this
information.
The btree cursor being passed to xfs_check_agi_freecount() has a
reference to the perag being operated on, so use that directly in
xfs_check_agi_freecount() rather than passing an AGI.
Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Radix tree tags are supposed to be unsigned ints, so fix the callers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
xfs_bmap_set_attrforkoff is only used inside of xfs_bmap.c, so mark it
static.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Variable busy is set to false, but this value is never read as it is
overwritten or not used later on, hence it is a redundant assignment
and can be removed.
Clean up the following clang-analyzer warning:
fs/xfs/libxfs/xfs_alloc.c:1679:2: warning: Value stored to 'busy' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Variable 'xfs_agf_buf_ops', 'xfs_agi_buf_ops', 'xfs_dquot_buf_ops' and
'xfs_symlink_buf_ops' are declared twice, so sort these variables
alphabetically and remove the repeated declaration.
Cc: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Unlinked lists are held in the perag, and freeing of inodes needs to
be passed a perag, too, so look up the perag early in the unlink
processing and use it throughout.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Now that we've internalised the two-phase inode allocation, we can
now easily make the AG selection and allocation atomic from the
perspective of a single perag context. This will ensure AGs going
offline/away cannot occur between the selection and allocation
steps.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This is just a simple wrapper around the per-ag inode allocation
that doesn't need to exist. The internal mechanism to select and
allocate within an AG does not need to be exposed outside
xfs_ialloc.c, and it being exposed simply makes it harder to follow
the code and simplify it.
This is simplified by internalising xf_dialloc_select_ag() and
xfs_dialloc_ag() into a single xfs_dialloc() function and then
xfs_dir_ialloc() can go away.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
xfs_dialloc_select_ag() does a lot of repetitive work. It first
calls xfs_ialloc_ag_select() to select the AG to start allocation
attempts in, which can do up to two entire loops across the perags
that inodes can be allocated in. This is simply checking if there is
spce available to allocate inodes in an AG, and it returns when it
finds the first candidate AG.
xfs_dialloc_select_ag() then does it's own iterative walk across
all the perags locking the AGIs and trying to allocate inodes from
the locked AG. It also doesn't limit the search to mp->m_maxagi,
so it will walk all AGs whether they can allocate inodes or not.
Hence if we are really low on inodes, we could do almost 3 entire
walks across the whole perag range before we find an allocation
group we can allocate inodes in or report ENOSPC.
Because xfs_ialloc_ag_select() returns on the first candidate AG it
finds, we can simply do these checks directly in
xfs_dialloc_select_ag() before we lock and try to allocate inodes.
This reduces the inode allocation pass down to 2 perag sweeps at
most - one for aligned inode cluster allocation and if we can't
allocate full, aligned inode clusters anywhere we'll do another pass
trying to do sparse inode cluster allocation.
This also removes a big chunk of duplicate code.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The only caller of xfs_dialloc_select_ag() will always return
-ENOSPC to it's caller if the agbp returned from
xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate
AGI we can allocate inodes from is always an ENOSPC condition, so
move this logic up into xfs_dialloc_select_ag() so we can simplify
the return logic in this function.
xfs_dialloc_select_ag() now only ever returns 0 with a locked
agbp, or an error with no agbp.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Now that everything passes a perag, the agno is not needed anymore.
Convert all the users to use pag->pag_agno instead and remove the
agno from the cursor. This was largely done as an automated search
and replace.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Which will eventually completely replace the agno in it.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Needs a [from, to] ranged AG walk, and the perag to be stuffed into
the info structure for callouts to use.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We currently pass an agno from the AG reservation functions to the
individual feature accounting functions, which in future may have to
do perag lookups to access per-AG state. Instead, pre-emptively
plumb the perag through from the highest AG reservation layer to the
feature callouts so they won't have to look it up again.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
All of the callers of the busy extent API either have perag
references available to use so we can pass a perag to the busy
extent functions rather than having them have to do unnecessary
lookups.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Rather than manually walking the ags and passing agnunbers around,
pass the perag for the AG we are currently working on around in the
iwalk structure.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Convert the raw walks to an iterator, pulling the current AG out of
pag->pag_agno instead of the loop iterator variable.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
for_each_perag_tag() is defined in xfs_icache.c for local use.
Promote this to xfs_ag.h and define equivalent iteration functions
so that we can use them to iterate AGs instead to replace open coded
perag walks and perag lookups.
We also convert as many of the straight forward open coded AG walks
to use these iterators as possible. Anything that is not a direct
conversion to an iterator is ignored and will be updated in future
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the xfs_perag infrastructure to the libxfs files that contain
all the per AG infrastructure. This helps set up for passing perags
around all the code instead of bare agnos with minimal extra
includes for existing files.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
They are AG functions, not superblock functions, so move them to the
appropriate location.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace some open-coded fs block unit conversions with the standard
conversion macro.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We can use the helper function xfs_attr_node_remove_name to reduce
duplicate code in this function
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This function is no longer used, so it is safe to remove
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch modifies the attr set routines to be delay ready. This means
they no longer roll or commit transactions, but instead return -EAGAIN
to have the calling routine roll and refresh the transaction. In this
series, xfs_attr_set_args has become xfs_attr_set_iter, which uses a
state machine like switch to keep track of where it was when EAGAIN was
returned. See xfs_attr.h for a more detailed diagram of the states.
Two new helper functions have been added: xfs_attr_rmtval_find_space and
xfs_attr_rmtval_set_blk. They provide a subset of logic similar to
xfs_attr_rmtval_set, but they store the current block in the delay attr
context to allow the caller to roll the transaction between allocations.
This helps to simplify and consolidate code used by
xfs_attr_leaf_addname and xfs_attr_node_addname. xfs_attr_set_args has
now become a simple loop to refresh the transaction until the operation
is completed. Lastly, xfs_attr_rmtval_remove is no longer used, and is
removed.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch modifies the attr remove routines to be delay ready. This
means they no longer roll or commit transactions, but instead return
-EAGAIN to have the calling routine roll and refresh the transaction. In
this series, xfs_attr_remove_args is merged with
xfs_attr_node_removename become a new function, xfs_attr_remove_iter.
This new version uses a sort of state machine like switch to keep track
of where it was when EAGAIN was returned. A new version of
xfs_attr_remove_args consists of a simple loop to refresh the
transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH
flag is used to finish the transaction where ever the existing code used
to.
Calls to xfs_attr_rmtval_remove are replaced with the delay ready
version __xfs_attr_rmtval_remove. We will rename
__xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are
done.
xfs_attr_rmtval_remove itself is still in use by the set routines (used
during a rename). For reasons of preserving existing function, we
modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is
set. Similar to how xfs_attr_remove_args does here. Once we transition
the set routines to be delay ready, xfs_attr_rmtval_remove is no longer
used and will be removed.
This patch also adds a new struct xfs_delattr_context, which we will use
to keep track of the current state of an attribute operation. The new
xfs_delattr_state enum is used to track various operations that are in
progress so that we know not to repeat them, and resume where we left
off before EAGAIN was returned to cycle out the transaction. Other
members take the place of local variables that need to retain their
values across multiple function calls. See xfs_attr.h for a more
detailed diagram of the states.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch basically hoists the node transaction handling around the
leaf code we just hoisted. This will helps setup this area for the
state machine since the goto is easily replaced with a state since it
ends with a transaction roll.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch hoists xfs_attr_leaf_addname into the calling function. The
goal being to get all the code that will require state management into
the same scope. This isn't particularly aesthetic right away, but it is a
preliminary step to merging in the state machine code.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch hoists the later half of xfs_attr_node_addname into
the calling function. We do this because it is this area that
will need the most state management, and we want to keep such
code in the same scope as much as possible
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch separates the first half of xfs_attr_node_addname into a
helper function xfs_attr_node_addname_find_attr. It also replaces the
restart goto with an EAGAIN return code driven by a loop in the calling
function. This looks odd now, but will clean up nicly once we introduce
the state machine. It will also enable hoisting the last state out of
xfs_attr_node_addname with out having to plumb in a "done" parameter to
know if we need to move to the next state or not.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch separate xfs_attr_node_addname into two functions. This will
help to make it easier to hoist parts of xfs_attr_node_addname that need
state management
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch is actually the combination of patches from the previous
version (v18). Initially patch 3 hoisted xfs_attr_set_shortform, and
the next added the helper xfs_attr_set_fmt. xfs_attr_set_fmt is similar
the old xfs_attr_set_shortform. It returns 0 when the attr has been set
and no further action is needed. It returns -EAGAIN when shortform has
been transformed to leaf, and the calling function should proceed the
set the attr in leaf form.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This patch pulls a new helper function xfs_attr_node_remove_name out
of xfs_attr_node_remove_step. This helps to modularize
xfs_attr_node_remove_step which will help make the delayed attribute
code easier to follow
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Originally we added this patch to help modularize the attr code in
preparation for delayed attributes and the state machine it requires.
However, later reviews found that this slightly alters the transaction
handling as the helper function is ambiguous as to whether the
transaction is diry or clean. This may cause a dirty transaction to be
included in the next roll, where previously it had not. To preserve the
existing code flow, we reverse apply this commit.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This is because libxfs_init() registers the main thread with liburcu,
but doesn't unregister the thread if libxfs library initialization
fails. When repair sets more dangerous options and tries again, the
second initialization attempt causes liburcu to abort. Fix this by
unregistering the thread with liburcu if libxfs initialization fails.
Observed by running xfs/284.
Fixes: e4da1b16 ("xfsprogs: introduce liburcu support") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use the newly factored out page allocation code. This adds
automatic buffer zeroing for non-read uncached buffers.
This also allows us to greatly simply the error handling in
xfs_buf_get_uncached(). Because xfs_buf_alloc_pages() cleans up
partial allocation failure, we can just call xfs_buf_free() in all
error cases now to clean up after failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Thu, 14 Oct 2021 16:35:43 +0000 (12:35 -0400)]
libxfs: fix call_rcu crash when unmounting the fake mount in mkfs
In commit a6fb6abe, we simplified the process by which mkfs.xfs computes
the minimum log size calculation by creating a dummy xfs_mount with the
draft superblock image, using the dummy to compute the log geometry, and
then unmounting the dummy.
Note that creating a dummy mount with no data device is supported by
libxfs, though with the caveat that we don't set up any perag structures
at all. Up until this point this has worked perfectly well since free()
(and hence kmem_free()) are perfectly happy to ignore NULL pointers.
Unfortunately, this will cause problems with the upcoming patch to shift
per-AG setup and teardown to libxfs because call_rcu in the liburcu
library actually tries to access the rcu_head of the passed-in perag
structure, but they're all NULL in the dummy mount case. IOWs,
xfs_free_perag requires that every AG have a per-AG structure, and it's
too late to change the 5.14 kernel libxfs now, so work around this by
altering libxfs_mount to remember when it has initialized the perag
structures and libxfs_umount to skip freeing them when the flag isn't
set.
Just to be clear: This fault has no user-visible consequences right now;
it's a fixup to avoid problems in the libxfs sync series for 5.14.
Fixes: a6fb6abe ("mkfs: simplify minimum log size calculation") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fall through */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_alloc.c:3167:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_da_btree.c:286:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:346:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:388:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_bmap_util.c:246:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:88:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:96:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_file.c:867:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:562:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:1548:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_iomap.c:1040:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_inode.c:852:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_log.c:2627:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_trans_buf.c:298:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/bmap.c:275:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/btree.c:48:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:85:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:138:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:698:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/dabtree.c:51:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/repair.c:951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/agheader.c:89:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Fri, 1 Oct 2021 18:00:34 +0000 (14:00 -0400)]
libxfs: port xfs_set_inode_alloc from the kernel
To prepare to perag initialization code move to libxfs, port the
xfs_set_inode_alloc function from the kernel and make
libxfs_initialize_perag use it. The code isn't 1:1 identical, but
AFAICT it behaves the same way. In a future kernel release we'll
move the function into xfs_ag.c and update xfsprogs.
(sandeen: Note that this is in effect simply syncing up several
kernel commits in this code which was not shared via libxfs.)
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 29 Sep 2021 20:57:10 +0000 (16:57 -0400)]
libfrog: move topology.[ch] to libxfs
The topology code depends on a few libxfs structures and is only needed
by mkfs and xfs_repair. Move this code to libxfs to reduce the size of
libfrog and to avoid build failures caused by "xfs: move perag structure
and setup to libxfs/xfs_ag.[ch]".
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 29 Sep 2021 20:57:05 +0000 (16:57 -0400)]
mkfs: move mkfs/proto.c declarations to mkfs/proto.h
These functions are only used by mkfs, so move them to a separate header
file that isn't in an internal library.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
[sandeen: cosmetic tidyups as suggested by Christoph] Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Dave Chinner [Wed, 29 Sep 2021 20:57:02 +0000 (16:57 -0400)]
atomic: convert to uatomic
Now we have liburcu, we can make use of it's atomic variable
implementation. It is almost identical to the kernel API - it's just
got a "uatomic" prefix. liburcu also provides all the same aomtic
variable memory barriers as the kernel, so if we pull memory barrier
dependent kernel code across, it will just work with the right
barrier wrappers.
This is preparation the addition of more extensive atomic operations
the that kernel buffer cache requires to function correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[chandan.babu@oracle.com: Swap order of arguments provided to atomic[64]_[add|sub]()] Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
[sandeen: fix whitespace]
[sandeen: make #defines a little more consistent about (a,v)] Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Dave Chinner [Wed, 29 Sep 2021 20:48:29 +0000 (16:48 -0400)]
libxfs: add spinlock_t wrapper
These provide the kernel spinlock_t interface, but are *not*
spinlocks. Spinlocks cannot be used by general purpose userspace
processes due to the fact they cannot control task preemption and
scheduling reliability. Hence these are implemented as a
pthread_mutex_t, similar to the way the kernel RT build implements
spinlock_t as a kernel mutex.
Because the current libxfs spinlock "implementation" just makes
spinlocks go away, we have to also add initialisation to spinlocks
that libxfs uses that are missing from the userspace implementation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[chandan.babu@oracle.com: Initialize inode log item spin lock] Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
[sandeen: fix minor whitespace] Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Dave Chinner [Wed, 29 Sep 2021 20:48:03 +0000 (16:48 -0400)]
xfsprogs: introduce liburcu support
The upcoming buffer cache rework/kerenl sync-up requires atomic
variables. I could use C++11 atomics build into GCC, but they are a
pain to work with and shoe-horn into the kernel atomic variable API.
Much easier is to introduce a dependency on liburcu - the userspace
RCU library. This provides atomic variables that very closely match
the kernel atomic variable API, and it provides a very similar
memory model and memory barrier support to the kernel. And we get
RCU support that has an identical interface to the kernel and works
the same way.
Hence kernel code written with RCU algorithms and atomic variables
will just slot straight into the userspace xfsprogs code without us
having to think about whether the lockless algorithms will work in
userspace or not. This reduces glue and hoop jumping, and gets us
a step closer to having the entire userspace libxfs code MT safe.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[chandan.babu@oracle.com: Add m4 macros to detect availability of liburcu] Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
[sandeen: use dchinner's m4 macros] Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:05:51 +0000 (19:05 -0400)]
xfs_quota: allow users to truncate group and project quota files
In commit 79ac1ae4, I /think/ xfsprogs gained the ability to deal with
project or group quotas. For some reason, the quota remove command was
structured so that if the user passes both -g and -p, it will only ask
the kernel truncate the group quota file. This is a strange behavior
since -ug results in truncation requests for both user and group quota
files, and the kernel is smart enough to return 0 if asked to truncate a
quota file that doesn't exist.
In other words, this is a seemingly arbitrary limitation of the command.
It's an unexpected behavior since we don't do any sort of parameter
validation to warn users when -p is silently ignored. Modern V5
filesystems support both group and project quotas, so it's all the more
surprising that you can't do group and project all at once. Remove this
pointless restriction.
Found while triaging xfs/007 regressions.
Fixes: 79ac1ae4 ("Fix xfs_quota disable, enable, off and remove commands Merge of master-melb:xfs-cmds:29395a by kenmcd.") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:05:15 +0000 (19:05 -0400)]
xfs_repair: invalidate dirhash entry when junking dirent
In longform_dir2_entry_check_data, we add the directory entries we find
to the incore dirent hash table after we've validated the name but
before we're totally done checking the entry. This sequence is
necessary to detect all duplicated names in the directory.
Unfortunately, if we later decide to junk the ondisk dirent, we neglect
to mark the dirhash entry, so if the directory gets rebuilt, it will get
rebuilt with the entry that we rejected.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:03:16 +0000 (19:03 -0400)]
mkfs: validate rt extent size hint when rtinherit is set
Extent size hints exist to nudge the behavior of the file data block
allocator towards trying to make aligned allocations. Therefore, it
doesn't make sense to allow a hint that isn't a multiple of the
fundamental allocation unit for a given file.
This means that if the sysadmin is formatting with rtinherit set on the
root dir, validate_extsize_hint needs to check the hint value on a
simulated realtime file to make sure that it's correct. Unfortunately,
the gate check here was for a nonzero rt extent size, which is wrong
since we never format with rtextsize==0. This leads to absurd failures
such as:
# mkfs.xfs -f /dev/sdf -r extsize=7b -d rtinherit=0,extszinherit=13
illegal extent size hint 13, must be less than 649088 and a multiple of 7.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:03:12 +0000 (19:03 -0400)]
xfs_repair: validate alignment of inherited rt extent hints
If we encounter a directory that has been configured to pass on an
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should turn off the hint because that
is a misconfiguration. Old kernels didn't check for this when copying
attributes into new files and would crash in the rt allocator.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
[sandeen: clarify that it is an extent size *hint*] Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:01:23 +0000 (19:01 -0400)]
xfs_io: don't count fsmaps before querying fsmaps
There's a bunch of code in fsmap.c that tries to count the GETFSMAP
records so that it can size the fsmap array appropriately for the
GETFSMAP call. It's pointless to iterate the entire result set /twice/
(unlike the bmap command where the extent count is actually stored in
the fs metadata), so get rid of the duplicate walk.
In other words: Iterate over the records using the default chunk size
instead of doing one call to find the size and doing a giant allocation
and GETFSMAP call.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:01:23 +0000 (19:01 -0400)]
xfs_io: clean up the funshare command a bit
Add proper argument parsing to the funshare command so that when you
pass it nonexistent --help it will print the help instead of complaining
that it can't convert that to a number.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Darrick J. Wong [Wed, 28 Jul 2021 23:01:23 +0000 (19:01 -0400)]
xfs_io: fix broken funshare_cmd usage
Create a funshare_cmd and use that to store information about the
xfs_io funshare command instead of overwriting the contents of
fzero_cmd. This fixes confusing output like:
$ xfs_io -c 'fzero 2 3 --help' /
fzero: invalid option -- '-'
funshare off len -- unshares shared blocks within the range
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We are aborting the bunmapi() pass because of this specific chunk of
code:
/*
* Make sure we don't touch multiple AGF headers out of order
* in a single transaction, as that could cause AB-BA deadlocks.
*/
if (!wasdel && !isrt) {
agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
if (prev_agno != NULLAGNUMBER && prev_agno > agno)
break;
prev_agno = agno;
}
This is designed to prevent deadlocks in AGF locking when freeing
multiple extents by ensuring that we only ever lock in increasing
AG number order. Unfortunately, this also violates the "bunmapi will
always succeed" semantic that some high level callers depend on,
such as xfs_dir2_shrink_inode(), xfs_da_shrink_inode() and
xfs_inactive_symlink_rmt().
This AG lock ordering was introduced back in 2017 to fix deadlocks
triggered by generic/299 as reported here:
This codebase is old enough that it was before we were defering all
AG based extent freeing from within xfs_bunmapi(). THat is, we never
actually lock AGs in xfs_bunmapi() any more - every non-rt based
extent free is added to the defer ops list, as is all BMBT block
freeing. And RT extents are not RT based, so there's no lock
ordering issues associated with them.
Hence this AGF lock ordering code is both broken and dead. Let's
just remove it so that the large directory block code works reliably
again.
Tested against xfs/538 and generic/299 which is the original test
that exposed the deadlocks that this code fixed.
Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This is a check to ensure that the extents have been read into
memory before we are doing a ifork btree manipulation. This assert
is bogus in the above case.
We have a fragmented directory block that has more extents in it
than can fit in extent format, so the inode data fork is in btree
format. xfs_dir2_shrink_inode() asks to remove all remaining 16
filesystem blocks from the inode so it can convert to short form,
and __xfs_bunmapi() removes all the extents. We now have a data fork
in btree format but have zero extents in the fork. This incorrectly
trips the xfs_need_iread_extents() assert because it assumes that an
empty extent btree means the extent tree has not been read into
memory yet. This is clearly not the case with xfs_bunmapi(), as it
has an explicit call to xfs_iread_extents() in it to pull the
extents into memory before it starts unmapping.
Also, the assert directly after this bogus one is:
ASSERT(ifp->if_format == XFS_DINODE_FMT_BTREE);
Which covers the context in which it is legal to call
xfs_bmap_btree_to_extents just fine. Hence we should just remove the
bogus assert as it is clearly wrong and causes a regression.
The returns the test behaviour to the pre-existing assert failure in
xfs_dir2_shrink_inode() that indicates xfs_bunmapi() has failed to
remove all the extents in the range it was asked to unmap.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The RTINHERIT bit can be set on a directory so that newly created
regular files will have the REALTIME bit set to store their data on the
realtime volume. If an extent size hint (and EXTSZINHERIT) are set on
the directory, the hint will also be copied into the new file.
As pointed out in previous patches, for realtime files we require the
extent size hint be an integer multiple of the realtime extent, but we
don't perform the same validation on a directory with both RTINHERIT and
EXTSZINHERIT set, even though the only use-case of that combination is
to propagate extent size hints into new realtime files. This leads to
inode corruption errors when the bad values are propagated.
Because there may be existing filesystems with such a configuration, we
cannot simply amend the inode verifier to trip on these directories and
call it a day because that will cause previously "working" filesystems
to start throwing errors abruptly. Note that it's valid to have
directories with rtinherit set even if there is no realtime volume, in
which case the problem does not manifest because rtinherit is ignored if
there's no realtime device; and it's possible that someone set the flag,
crashed, repaired the filesystem (which clears the hint on the realtime
file) and continued.
Therefore, mitigate this issue in several ways: First, if we try to
write out an inode with both rtinherit/extszinherit set and an unaligned
extent size hint, turn off the hint to correct the error. Second, if
someone tries to misconfigure a directory via the fssetxattr ioctl, fail
the ioctl. Third, reverify both extent size hint values when we
propagate heritable inode attributes from parent to child, to prevent
misconfigurations from spreading.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
While chasing a bug involving invalid extent size hints being propagated
into newly created realtime files, I noticed that the xfs_ioctl_setattr
checks for the extent size hints weren't the same as the ones now
encoded in libxfs and used for validation in repair and mkfs.
Because the checks in libxfs are more stringent than the ones in the
ioctl, it's possible for a live system to set inode flags that
immediately result in corruption warnings. Specifically, it's possible
to set an extent size hint on an rtinherit directory without checking if
the hint is aligned to the realtime extent size, which makes no sense
since that combination is used only to seed new realtime files.
Replace the open-coded and inadequate checks with the libxfs verifier
versions and update the code comments a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The new online shrink code exposed a gap in the per-AG reservation
code, which is that we only return ENOSPC to callers if the entire fs
doesn't have enough free blocks. Except for debugging mode, the
reservation init code doesn't ever check that there's enough free space
in that AG to cover the reservation.
Not having enough space is not considered an immediate fatal error that
requires filesystem offlining because (a) it's shouldn't be possible to
wind up in that state through normal file operations and (b) even if
one did, freeing data blocks would recover the situation.
However, online shrink now needs to know if shrinking would not leave
enough space so that it can abort the shrink operation. Hence we need
to promote this assertion into an actual error return.
Observed by running xfs/168 with a 1k block size, though in theory this
could happen with any configuration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
These ioctl definitions in xfs_fs.h are part of the userspace ABI and
were mistakenly removed during the 5.13 merge window.
Fixes: 9fefd5db08ce ("xfs: convert to fileattr") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Introduce an in-core counter to track the sum of all allocbt blocks
used by the filesystem. This value is currently tracked per-ag via
the ->agf_btreeblks field in the AGF, which also happens to include
rmapbt blocks. A global, in-core count of allocbt blocks is required
to identify the subset of global ->m_fdblocks that consists of
unavailable blocks currently used for allocation btrees. To support
this calculation at block reservation time, construct a similar
global counter for allocbt blocks, populate it on first read of each
AGF and update it as allocbt blocks are used and released.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
perag reservation is enabled at mount time on a per AG basis. The
upcoming change to set aside allocbt blocks from block reservation
requires a populated allocbt counter as soon as possible after mount
to be fully effective against large perag reservations. Therefore as
a preparation step, initialize the pagf on all mounts where at least
one reservation is active. Note that this already occurs to some
degree on most default format filesystems as reservation requirement
calculations already depend on the AGF or AGI, depending on the
reservation type.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Keep the mount superblock counters up to date for !lazysbcount
filesystems so that when we log the superblock they do not need
updating in any way because they are already correct.
It's found by what Zorro reported:
1. mkfs.xfs -f -l lazy-count=0 -m crc=0 $dev
2. mount $dev $mnt
3. fsstress -d $mnt -p 100 -n 1000 (maybe need more or less io load)
4. umount $mnt
5. xfs_repair -n $dev
and I've seen no problem with this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reported-by: Zorro Lang <zlang@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
In commit f8f2835a9cf3 we changed the behavior of XFS to use EFIs to
remove blocks from an overfilled AGFL because there were complaints
about transaction overruns that stemmed from trying to free multiple
blocks in a single transaction.
Unfortunately, that commit missed a subtlety in the debug-mode
transaction accounting when a realtime volume is attached. If a
realtime file undergoes a data fork mapping change such that realtime
extents are allocated (or freed) in the same transaction that a data
device block is also allocated (or freed), we can trip a debugging
assertion. This can happen (for example) if a realtime extent is
allocated and it is necessary to reshape the bmbt to hold the new
mapping.
When we go to allocate a bmbt block from an AG, the first thing the data
device block allocator does is ensure that the freelist is the proper
length. If the freelist is too long, it will trim the freelist to the
proper length.
In debug mode, trimming the freelist calls xfs_trans_agflist_delta() to
record the decrement in the AG free list count. Prior to f8f28 we would
put the free block back in the free space btrees in the same
transaction, which calls xfs_trans_agblocks_delta() to record the
increment in the AG free block count. Since AGFL blocks are included in
the global free block count (fdblocks), there is no corresponding
fdblocks update, so the AGFL free satisfies the following condition in
xfs_trans_apply_sb_deltas:
/*
* Check that superblock mods match the mods made to AGF counters.
*/
ASSERT((tp->t_fdblocks_delta + tp->t_res_fdblocks_delta) ==
(tp->t_ag_freeblks_delta + tp->t_ag_flist_delta +
tp->t_ag_btree_delta));
The comparison here used to be: (X + 0) == ((X+1) + -1 + 0), where X is
the number blocks that were allocated.
After commit f8f28 we defer the block freeing to the next chained
transaction, which means that the calls to xfs_trans_agflist_delta and
xfs_trans_agblocks_delta occur in separate transactions. The (first)
transaction that shortens the free list trips on the comparison, which
has now become:
(X + 0) == ((X) + -1 + 0)
because we haven't freed the AGFL block yet; we've only logged an
intention to free it. When the second transaction (the deferred free)
(0 + 0) == (1 + 0 + 0)
and trip over that in turn.
At this point, the astute reader may note that the two commits tagged by
this patch have been in the kernel for a long time but haven't generated
any bug reports. How is it that the author became aware of this bug?
This originally surfaced as an intermittent failure when I was testing
realtime rmap, but a different bug report by Zorro Lang reveals the same
assertion occuring on !lazysbcount filesystems.
The common factor to both reports (and why this problem wasn't
previously reported) becomes apparent if we consider when
xfs_trans_apply_sb_deltas is called by __xfs_trans_commit():
if (tp->t_flags & XFS_TRANS_SB_DIRTY)
xfs_trans_apply_sb_deltas(tp);
With a modern lazysbcount filesystem, transactions update only the
percpu counters, so they don't need to set XFS_TRANS_SB_DIRTY, hence
xfs_trans_apply_sb_deltas is rarely called.
However, updates to the count of free realtime extents are not part of
lazysbcount, so XFS_TRANS_SB_DIRTY will be set on transactions adding or
removing data fork mappings to realtime files; similarly,
XFS_TRANS_SB_DIRTY is always set on !lazysbcount filesystems.
Dave mentioned in response to an earlier version of this patch:
"IIUC, what you are saying is that this debug code is simply not
exercised in normal testing and hasn't been for the past decade? And it
still won't be exercised on anything other than realtime device testing?
"...it was debugging code from 1994 that was largely turned into dead
code when lazysbcounters were introduced in 2007. Hence I'm not sure it
holds any value anymore."
This debugging code isn't especially helpful - you can modify the
flcount on one AG and the freeblks of another AG, and it won't trigger.
Add the fact that nobody noticed for a decade, and let's just get rid of
it (and start testing realtime :P).
This bug was found by running generic/051 on either a V4 filesystem
lacking lazysbcount; or a V5 filesystem with a realtime volume.
Cc: bfoster@redhat.com, zlang@redhat.com Fixes: f8f2835a9cf3 ("xfs: defer agfl block frees when dfops is available") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Rename struct xfs_legacy_ictimestamp to struct xfs_log_legacy_timestamp
as it is a type used for logging timestamps with no relationship to the
in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Rename xfs_ictimestamp_t to xfs_log_timestamp_t as it is a type used
for logging timestamps with no relationship to the in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The in-memory XFS_IFEXTENTS is now only used to check if an inode with
extents still needs the extents to be read into memory before doing
operations that need the extent map. Add a new xfs_need_iread_extents
helper that returns true for btree format forks that do not have any
entries in the in-memory extent btree, and use that instead of checking
the XFS_IFEXTENTS flag.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Just check for an inline format fork instead of the using the equivalent
in-memory XFS_IFINLINE flag.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Just check for a btree format fork instead of the using the equivalent
in-memory XFS_IFBROOT flag.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Stop using the XFS_IFEXTENTS flag, and instead switch on the fork format
in xfs_idestroy_fork to decide how to cleanup.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Directly return from the subfunctions and avoid the error variable. Also
remove the not really needed dp local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
xfs_bmap_one_block is only called for the attribute fork. Move it to
xfs_attr.c, drop the unused whichfork argument and code only executed for
the data fork and rename the result to xfs_attr_is_leaf.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the XFS_IFEXTENTS check from the callers into xfs_iread_extents to
simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
A previous commit removed a call to xfs_attr3_leaf_read that
assigned an error return code to variable error. We now have
a few early error return paths to label 'out' that return
error if error is set; however error now is uninitialized
so potentially garbage is being returned. Fix this by setting
error to zero to restore the original behaviour where error
was zero at the label 'restart'.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Default attr fork offset is based on inode size, so is a fixed
geometry parameter of the inode. Move it to the xfs_ino_geometry
structure and stop calculating it on every call to
xfs_default_attroffset().
Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Device inodes have a non-default data fork size of 8 bytes
as checked/enforced by xfs_repair. xfs_default_attroffset() doesn't
handle this, so lets do a minor refactor so it does.
Fixes: e6a688c33238 ("xfs: initialise attr fork on inode create") Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The incore data fork of an inode stores the bmap btree root node as 'struct
xfs_btree_block'. However, the ondisk version of the inode stores the bmap
btree root node as a 'struct xfs_bmdr_block'.
xfs_bmap_add_attrfork_btree() checks if the btree root node fits inside the
data fork of the inode. However, it incorrectly uses 'struct xfs_btree_block'
to compute the size of the bmap btree root node. Since size of 'struct
xfs_btree_block' is larger than that of 'struct xfs_bmdr_block',
xfs_bmap_add_attrfork_btree() could end up unnecessarily demoting the current
root node as the child of newly allocated root node.
This commit optimizes space usage by modifying xfs_bmap_add_attrfork_btree()
to use 'struct xfs_bmdr_block' to check if the bmap btree root node fits
inside the data fork of the inode.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
projects / thirdparty / xfsprogs-dev.git / log
