In netfs_extract_user_iter(), if it's given a zero-length iterator, it will
fall through the loop without setting ret, and so the error handling
behaviour will be undefined, depending on whether ret happens to be
negative. The value of ret then propagates back up the callstack.
Fix this by presetting ret to 0.
Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/20260512123404.719402-9-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
test_access_variable_array relied on accessing struct sched_domain::span
to validate variable-length array handling via BTF. Recent scheduler
refactoring removed or hid this field, causing the test
to fail to build.
Given that this test depends on internal scheduler structures that are
subject to refactoring, and equivalent variable-length array coverage
already exists via bpf_testmod-based tests, remove
test_access_variable_array entirely.
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker.
Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Suggested-by: Ben Hutchings <ben@decadent.org.uk> Suggested-by: Lin Ma <malin89@huawei.com> Suggested-by: Jingguo Tan <tanjingguo@huawei.com> Suggested-by: Aaron Esau <aaron1esau@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Tested-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com> Link: https://patch.msgid.link/ageeJfJHwgzmKXbh@v4bel Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors.
Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Signed-off-by: William Bowling <vakzz@zellic.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260513041635.1289541-1-vakzz@zellic.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
Replace devm_clk_get() followed by clk_prepare_enable() with
devm_clk_get_enabled() for the bus clock. This reduces boilerplate code
and error handling, as the managed API automatically disables the clock
when the device is removed or if probe fails.
Remove the now-unnecessary clk_disable_unprepare() calls from the probe
error path and the remove callback. Adjust the error handling to use the
existing put_host label.
a) TCMU device removal context:
- call del_gendisk() to get q->q_usage_counter
- call start_flush_work() to get work_completion of wb->dwork
b) f2fs writeback context:
- in wb_workfn(), which holds work_completion of wb->dwork
- call f2fs_balance_fs() to get sbi->gc_lock
c) f2fs vfs_write context:
- call f2fs_gc() to get sbi->gc_lock
- call f2fs_write_checkpoint() to get sbi->cp_global_sem
d) f2fs mount context:
- call recover_fsync_data() to get sbi->cp_global_sem
- call f2fs_check_and_fix_write_pointer() to call blkdev_report_zones()
that goes down to blk_mq_alloc_request and get q->q_usage_counter
Original callstack is in Closes tag.
However, I think this is a false alarm due to before mount returns
successfully (context d), we can not access file therein via vfs_write
(context c).
Let's introduce per-sb cp_global_sem_key, and assign the key for
cp_global_sem, so that lockdep can recognize cp_global_sem from
different super block correctly.
A lot of work are done by Shin'ichiro Kawasaki, thanks a lot for
the work.
Fixes: c426d99127b1 ("f2fs: Check write pointer consistency of open zones") Cc: stable@kernel.org Reported-and-tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/linux-f2fs-devel/20260218125237.3340441-1-shinichiro.kawasaki@wdc.com Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ adapted context to use plain `init_f2fs_rwsem` instead of mainline's `init_f2fs_rwsem_trace` macro ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scx_prio_less() runs from core-sched's pick_next_task() path with rq
locked but invokes ops.core_sched_before() with NULL locked_rq, leaving
scx_locked_rq_state NULL. If the BPF callback calls a kfunc that
re-acquires rq based on scx_locked_rq() - e.g. scx_bpf_cpuperf_set(cpu)
- it re-acquires the already-held rq.
Pass task_rq(a).
Fixes: 7b0888b7cc19 ("sched_ext: Implement core-sched support") Cc: stable@vger.kernel.org # v6.12+ Reported-by: Chris Mason <clm@meta.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
[ adapted call to use stable's single `sch`/`SCX_KF_REST` mask and `scx_rq_bypassing(task_rq(a))` signature ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf_iter_scx_dsq_new() clears kit->dsq on failure and
bpf_iter_scx_dsq_{next,destroy}() guard against that. scx_dsq_move() doesn't -
it dereferences kit->dsq immediately, so a BPF program that calls
scx_bpf_dsq_move[_vtime]() after a failed iter_new oopses the kernel.
On platforms with Auto Counter Reload (ACR) support, such as NVL, a
"NMI received for unknown reason 30" warning is observed when running
multiple events in a group with ACR enabled:
$ perf record -e '{instructions/period=20000,acr_mask=0x2/u,\
cycles/period=40000,acr_mask=0x3/u}' ./test
The warning occurs because the Performance Monitoring Interrupt (PMI)
is enabled for the self-reloaded event (the cycles event in this case).
According to the Intel SDM, the overflow bit
(IA32_PERF_GLOBAL_STATUS.PMCn_OVF) is never set for self-reloaded events.
Since the bit is not set, the perf NMI handler cannot identify the source
of the interrupt, leading to the "unknown reason" message.
Furthermore, enabling PMI for self-reloaded events is unnecessary and
can lead to extraneous records that pollute the user's requested data.
Disable the interrupt bit for all events configured with ACR self-reload.
Fixes: ec980e4facef ("perf/x86/intel: Support auto counter reload") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260430002558.712334-4-dapeng1.mi@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Please note that, this behavior is there even before commit 59615e2c1f63
("btrfs: reject single block sized compression early").
[CAUSE]
At compress_file_range(), after btrfs_compress_folios() call, we try
making an inlined extent by calling cow_file_range_inline().
But cow_file_range_inline() calls can_cow_file_range_inline() which has
more accurate checks on if the range can be inlined.
One of the user configurable conditions is the "max_inline=" mount
option. If that value is set low (like the example, 4 bytes, which
cannot store any header), or the compressed content is just slightly
larger than 2K (the default value, meaning a 50% compression ratio),
cow_file_range_inline() will return 1 immediately.
And since we're here only to try inline the compressed data, the range
is no larger than a single fs block.
Thus compression is never going to make it a win, we fall back to
marking the inode incompressible unavoidably.
[FIX]
Just add an extra check after inline attempt, so that if the inline
attempt failed, do not set the nocompress flag.
As there is no way to remove that flag, and the default 50% compression
ratio is way too strict for the whole inode.
When Kerberos authentication is used with AES-256 encryption (AES-256-CCM
or AES-256-GCM), the SMB3 encryption and decryption keys must be derived
using the full session key (Session.FullSessionKey) rather than just the
first 16 bytes (Session.SessionKey).
Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and
Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey
must be set to the full cryptographic key from the GSS authentication
context. The encryption and decryption key derivation (SMBC2SCipherKey,
SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The
signing key derivation continues to use Session.SessionKey (first 16
bytes) in all cases.
Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the
HMAC-SHA256 key input length for all derivations. When Kerberos with
AES-256 provides a 32-byte session key, the KDF for encryption/decryption
was using only the first 16 bytes, producing keys that did not match the
server's, causing mount failures with sec=krb5 and require_gcm_256=1.
Add a full_key_size parameter to generate_key() and pass the appropriate
size from generate_smb3signingkey():
- Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes)
- Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16
Also fix cifs_dump_full_key() to report the actual session key length for
AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools
like Wireshark receive the correct key for decryption.
Cc: <stable@vger.kernel.org> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com> Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d2603279c7d6 ("eventfs: Use list_del_rcu() for SRCU protected
list variable") converted the removal side to pair with the
list_for_each_entry_srcu() walker in eventfs_iterate(). The insertion
in eventfs_create_dir() was left as a plain list_add_tail(), which on
weakly-ordered architectures can expose a new entry to the SRCU reader
before its list pointers and fields are observable.
Use list_add_tail_rcu() so the publication pairs with the existing
list_del_rcu() and list_for_each_entry_srcu().
Fixes: 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260418152251.199343-1-devnexen@gmail.com Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ adapted scoped_guard(mutex, &eventfs_mutex) block to explicit mutex_lock()/mutex_unlock() pair ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector.
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
Make sure to drop the references taken by i2c_get_adapter() when falling
back to allocating an adapter as well as on late errors to allow the
looked up adapter to be deregistered.
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors.
Fixes: a57ebfc0b4da ("drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector") Cc: stable@vger.kernel.org # 6.0 Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patch.msgid.link/20260508144446.59722-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmem_cgroup_try_charge() returns -EAGAIN when the cgroup limit is
hit and the charge fails. TTM has no concept of -EAGAIN from resource
allocation; -ENOSPC is the canonical error meaning "no space, try
eviction". Convert at the source in ttm_resource_alloc() so no caller
needs to handle an unexpected error code, and clean up the now-redundant
-EAGAIN check in ttm_bo_alloc_resource().
Without this, -EAGAIN escaping ttm_resource_alloc() during an eviction
walk causes the walk to terminate early instead of continuing to the
next candidate.
Cc: Friedrich Vock <friedrich.vock@gmx.de> Cc: Maarten Lankhorst <dev@lankhorst.se> Cc: Tejun Heo <tj@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.14+ Fixes: 2b624a2c1865 ("drm/ttm: Handle cgroup based eviction in TTM") Assisted-by: GitHub_Copilot:claude-sonnet-4.6 Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Maarten Lankhorst <dev@lankhrost.se> Link: https://patch.msgid.link/20260508160920.230339-1-thomas.hellstrom@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
Closes: https://sashiko.dev/#/patchset/20260506184332.86743-2-matthew.auld%40intel.com Fixes: eb289a5f6cc6 ("drm/xe: Convert xe_dma_buf.c for exhaustive eviction") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.18+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/20260508102635.149172-4-matthew.auld@intel.com
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
panfrost_ioctl_wait_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
After a GPU reset the HWSP is zeroed, so previously completed
requests appear incomplete. If such a request is picked up during
reset_rewind() and marked guilty, i915_request_set_error_once()
returns early (fence already signaled), leaving fence.error without
a fatal error code. The subsequent __i915_request_skip() then hits:
```
GEM_BUG_ON(!fatal_error(rq->fence.error))
```
Fixes a kernel BUG observed on Sandy Bridge (Gen6) during
heartbeat-triggered engine resets.
```
kernel BUG at drivers/gpu/drm/i915/i915_request.c:556!
RIP: __i915_request_skip+0x15e/0x1d0 [i915]
...
__i915_request_reset+0x212/0xa70 [i915]
reset_rewind+0xe4/0x280 [i915]
intel_gt_reset+0x30d/0x5b0 [i915]
heartbeat+0x516/0x530 [i915]
```
Guard __i915_request_skip() with i915_request_signaled(), if the
fence is already signaled, the ring content is committed and there
is nothing left to skip.
Fixes: 36e191f0644b ("drm/i915: Apply i915_request_skip() on submission") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13729 Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Cc: stable@vger.kernel.org # v5.7+ Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/fe76921d35b6ae85aa651822726d0d9815aa5362.1776339012.git.sebastian.brzezinka@intel.com
(cherry picked from commit 5ba54393dcd7adf75a9f39f5a933b1538349cad5) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com
Fixes: 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") Cc: stable@vger.kernel.org Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260422033538.95000-1-zhenzhong.duan@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The global static blocked domain is a dummy domain without corresponding
dmar_domain structure, accessing beyond iommu_domain structure triggers
oops easily. Fix it by return early in domain_remove_dev_pasid() like
identity domain.
Intel Q35 integrated graphics (8086:29b2) exhibits broken DMAR
behaviour similar to other G4x/GM45 devices for which DMAR is
already disabled via quirks.
When DMAR is enabled, the system may hard lock up during boot or
early device initialization, requiring a reset.
Add the missing PCI ID to the existing quirk list to disable
DMAR for this device.
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL.
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
The ITS MSI domain no longer manages LPI allocation directly. LPIs are
allocated and freed by the parent LPI domain, which can now handle a
full range of interrupts and unwind partial allocations internally.
Make the ITS domain request and release the parent IRQs as a single
range instead of iterating over each interrupt. The ITS allocation
path then only needs to reserve EventIDs, allocate the parent range,
and fill in the ITS irq_data for each MSI. Since no operation in the
per-MSI loop can fail, the partial parent-free unwind becomes
unnecessary.
On teardown, reset the ITS irq_data for the range and then release the
parent range in one call, leaving LPI teardown to the LPI domain.
The per-IPI parent allocation loop returns immediately on failure and leaks
any parent interrupts allocated by earlier iterations.
The GICv5 LPI domain now owns LPI allocation and teardown internally,
but its irq_domain callbacks still reject requests where nr_irqs is
greater than one. This forces child domains to allocate and free LPIs
one at a time even when the interrupt core requests a contiguous
range.
Handle multi-interrupt allocation and teardown in the LPI domain by
iterating over the requested range and unwinding any partially
allocated state on failure.
Allocate the parent LPIs for the IPI domain with a single range
request as well, which cures the leakage problem.
The IPI and ITS MSI domains currently allocate and release LPIs
directly, then pass the selected LPI ID to the parent LPI domain. This
leaks the LPI domain's allocation policy into its child domains and
forces each child to duplicate part of the parent domain's teardown.
Make the LPI domain allocate LPIs in its .alloc() callback and release
them in a matching .free() callback. Child domains can then request a
parent interrupt without passing an implementation-specific LPI ID,
and the LPI lifetime is tied to the domain that owns the LPI
namespace.
Remove the gicv5_alloc_lpi() and gicv5_free_lpi() wrappers now that no
external caller needs to manage LPIs directly.
This is a preparatory change for an actual leakage problem in the
allocation code and therefore tagged with the same Fixes tag.
Affinity changes of IMSIC interrupts have to be careful to not lose an
interrupt in the process. Each vector keeps track of an affinity change in
progress with two pointers in struct imsic_vector.
imsic_vector::move_prev points to the previous CPU target data and
imsic_vector::move_next to the designated new CPU target data.
imsic_vector::move_prev on the new CPU can only be cleared after the
previous CPU has cleared imsic_vector::move_next, which ususally happens in
__imsic_remote_sync().
In case of CPU hot-unplug __imsic_remote_sync() is not invoked because the
CPU is already marked offline. That means imsic_vector::move_prev becomes
stale until the CPU is onlined again.
The stale pointer prevents further affinity changes for the affected
interrupts.
Solve this by clearing the imsic_vector::move_prev pointers in the CPU
hotplug offline path.
[ tglx: Replace word salad in change log ]
Fixes: 0f67911e821c ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector") Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260508-imsic-v2-1-e9f08dd46cf5@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RFC 8881, section 10.4.3 doesn't say anything about caching the file
size in the delegation record, nor does it say anything about comparing
a cached file size with the size reported by the client in the
CB_GETATTR reply for the purpose of determining if the client holds
modified data for the file.
What section 10.4.3 of RFC 8881 does say is that the server should
compare the *current* file size with the size reported by the client
holding the delegation in the CB_GETATTR reply, and if they differ to
treat it as a modification regardless of the change attribute retrieved
via the CB_GETATTR.
Doing otherwise would cause the server to believe the client holding the
delegation has a modified version of the file, even if the client
flushed the modifications to the server prior to the CB_GETATTR. This
would have the added side effect of subsequent CB_GETATTRs causing
updates to the mtime, ctime, and change attribute even if the client
holding the delegation makes no further updates to the file.
Modify nfsd4_deleg_getattr_conflict() to obtain the current file size
via i_size_read(). Retain the ncf_cur_fsize field, since it's a
convenient way to return the file size back to nfsd4_encode_fattr4(),
but don't use it for the purpose of detecting file changes. Remove the
unnecessary initialization of ncf_cur_fsize in nfs4_open_delegation().
Also, if we recall the delegation (because the client didn't respond to
the CB_GETATTR), then skip the logic that checks the nfs4_cb_fattr
fields.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Cc: stable@vger.kernel.org Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In netfs_extract_user_iter(), if iov_iter_extract_pages() failed to
extract user pages, bail out on -ENOMEM, otherwise return the error
code only if @npages == 0, allowing short DIO reads and writes to be
issued.
This fixes mmapstress02 from LTP tests against CIFS.
Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Reported-by: Xiaoli Feng <xifeng@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/20260512123404.719402-10-dhowells@redhat.com Cc: netfs@lists.linux.dev Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pika_dtm_thread() acquires client through of_find_i2c_device_by_node()
but fails to release it in error handling path. This could result in a
reference count leak, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the error handling path.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3984114f0562 ("powerpc/warp: Platform fix for i2c change") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251116024411.21968-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6ce8 ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex") Signed-off-by: Carlos López <clopez@suse.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Michael Roth <michael.roth@amd.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the 0th index of the zi_used_bucket_bitmap array is not freed
on error due to the pre-decrement then evaluate semantic of the while
loop used in xfs_alloc_zone_info(). Fix it by allowing for the i == 0
case to be covered.
Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection") Cc: stable@vger.kernel.org # v6.15 Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it.
Fixes: 2cacf7f23a02 ("x86/kexec: Fix stack and handling of re-entry point for ::preserve_context") Reported-by: Rohan Kakulawaram <rohanka@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Rohan Kakulawaram <rohanka@google.com> Cc: <stable@kernel.org> Link: https://patch.msgid.link/32d627134143ffd957891cb697138e839c623211.camel@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.
Fixes: e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()") Cc: stable@vger.kernel.org Reported-by: Ziyuan Chen <zc@anthropic.com> Tested-by: Ziyuan Chen <zc@anthropic.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Assisted-by: Claude:unspecified Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled
work was the tail of its hash bucket. When doing this, it checks whether
the preceding entry in acct->work_list has the same hash value, but
never checks that the predecessor is hashed at all. io_get_work_hash()
is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash
bits are never set for non-hashed work, so it returns 0. Thus, when a
hashed bucket-0 work is cancelled while a non-hashed work is its list
predecessor, the check spuriously passes and a pointer to the non-hashed
io_kiocb is stored in wq->hash_tail[0].
Because non-hashed work is dequeued via the fast path in
io_get_next_work(), which never touches hash_tail[], the stale pointer
is never cleared. Therefore, after the non-hashed io_kiocb completes and
is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The
io_wq is per-task (tctx->io_wq) and survives ring open/close, so the
dangling pointer persists for the lifetime of the task; the next hashed
bucket-0 enqueue dereferences it in io_wq_insert_work() and
wq_list_add_after() writes through freed memory.
Add the missing io_wq_is_hashed() check so a non-hashed predecessor
never inherits a hash_tail[] slot.
Cc: stable@vger.kernel.org Fixes: 204361a77f40 ("io-wq: fix hang after cancelling pending hashed work") Signed-off-by: Nicholas Carlini <nicholas@carlini.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__build_xattrs() detects that index_version < version, it destroys and
rebuilds the entire xattr rb-tree from the new blob, potentially
increasing count, names_size, and vals_size.
The prealloc_blob size check that follows still uses the stale
required_blob_size computed before the rebuild, so it passes even when
prealloc_blob is too small for the now-larger tree. After __set_xattr()
adds one more xattr on top, __ceph_build_xattrs_blob() is called from
the cap flush path and hits:
Fix this by recomputing required_blob_size after __build_xattrs()
returns, using the current tree state. Also re-validate against
m_max_xattr_size to fall back to the sync path if the rebuilt tree now
exceeds the MDS limit.
Cc: stable@vger.kernel.org Fixes: d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
[FIX]
Normally such dirty ebs won't cause problems, as when the iput() is
called on the btree inode, the dirty ebs will be forcibly written back,
and since the fs is already in an error status, such writeback will not
reach disk and finish immediately.
But it's still better to get rid of such dirty ebs, if we ended up with
dirty ebs but the fs is not in an error status, then such writeback at
iput() time will be too late, as all workers are already stopped but
writeback will utilize workers, which will lead to NULL pointer
dereferences.
Instead of unconditionally calling btrfs_extent_io_tree_release(), only
call it if btrfs_write_and_wait_transaction() finished successfully, so
that @dirty_pages extent io tree is kept untouched for transaction
cleanup.
CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uaudio_transfer_buffer_setup() calls dma_get_sgtable() and then passes
the sg_table to uaudio_iommu_map_xfer_buf() without checking whether sg
table construction succeeded. If dma_get_sgtable() fails, the sg_table
contents are not valid.
uaudio_iommu_map_pa() also ignores iommu_map() failures for the event and
transfer rings and still returns the allocated IOVA to the QMI response.
That can expose an unmapped IOVA to the audio DSP. For transfer rings,
the failed mapping also leaves the IOVA allocator state marked in use.
Check both operations. Free the coherent transfer buffer when sg table
construction fails, free the sg table when transfer-buffer IOMMU mapping
fails, and release the transfer-ring IOVA if iommu_map() fails. Also
return the existing event-ring IOVA when the event ring is already mapped,
matching the pre-split helper behavior.
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan.
Fixes: 5c6cd7021a05 ("ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Link: https://patch.msgid.link/20260507-usb-midi-endpoint-scan-bounds-v1-1-329d7348160e@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras.
The Samsung Galaxy Book5 360 (NP750QHA, PCI subsystem ID 0x144d:0xc902)
has severe audio distortion on the 3.5mm headphone jack. Applying
ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET corrects the output path
configuration, consistent with fixes already applied to other Samsung
Galaxy Book models using the same ALC256 codec.
Add a SND_PCI_QUIRK entry for the HP Pavilion Laptop 16-ag0xxx
(subsystem 0x103c:0x8cbc, Realtek ALC245). The
ALC245_FIXUP_HP_X360_MUTE_LEDS fixup is already used by the
neighbouring HP Pavilion Aero Laptop 13-bg0xxx (0x103c:0x8cbd);
it chains the master-mute COEF handler with the GPIO mic-mute
LED handler, which is what this machine needs.
Tested on the affected hardware: both the mute and mic-mute key
LEDs respond correctly to the keyboard hotkeys after this change.
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
rocket_ioctl_prep_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Cc: stable@vger.kernel.org Reviewed-by: Rong Zhang <i@rong.moe> Tested-by: Rong Zhang <i@rong.moe> Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Rong Zhang <i@rong.moe> Tested-by: Rong Zhang <i@rong.moe> Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible that the driver handling device is enumerated before
registering debugfs. If the driver wants to access debugfs by calling
tpmi_get_debugfs_dir(), this will return error in this case.
Hence register debugfs before creating devices.
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stable@vger.kernel.org Link: https://patch.msgid.link/20260430151103.1549733-2-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For RGB, set dynamic_range to CTA or VESA based on
crtc_state->limited_color_range so sinks apply correct
quantization. YCbCr remains limited (CTA) range.
(DP v1.4, Table 5-1)
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013 Cc: stable@vger.kernel.org Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lsdc_pci_probe() initializes KMS polling before setting up vblank support,
requesting the IRQ and registering the DRM device. If any of those later
steps fails, probe returns without finalizing polling. The driver also
never finalizes polling on regular removal.
Use drmm_kms_helper_poll_init() so polling is tied to the DRM device
lifetime and automatically finalized on probe failure and device removal.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: f39db26c5428 ("drm: Add kms driver for loongson display controller") Cc: stable@vger.kernel.org Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260513065706.23803-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a "duplicate tag error for tag 0" firmware crash during controller
reset while setting up a queue on Apple A11 / T8015 caused by stale
entries in the submission queue due to an invalid sq_tail offset after
reset.
Fixes: 04d8ecf37b5e ("nvme: apple: Add Apple A11 support") Cc: stable@vger.kernel.org Suggested-by: Yuriy Havrylyuk <yhavry@gmail.com> Reviewed-by: Sven Peter <sven@kernel.org> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MT7925 (USB ID 0e8d:e025) on fw version 20260106153314 sends WMT
FUNC_CTRL events that are missing the status field.
Prior to commit 006b9943b982 ("Bluetooth: btmtk: validate WMT event SKB
length before struct access") the status was read from out-of-bounds of
SKB data, which usually would result to success with
BTMTK_WMT_ON_UNDONE, although I don't know the intent here. The bounds
check added in that commit returns with error instead, producing
"Bluetooth: hci0: Failed to send wmt func ctrl (-22)" and makes the
device unusable.
Fix the regression by interpreting too short packet as status
BTMTK_WMT_ON_UNDONE, which makes the device work normally again.
Fixes: 634a4408c061 ("Bluetooth: btmtk: validate WMT event SKB length before struct access") Signed-off-by: Pauli Virtanen <pav@iki.fi> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> # MT7922 (0489:e0e2) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After media_pipeline_start() was called, the media graph is assumed to
be validated. It won't be validated again if a second stream starts.
The imx-media-csi driver, however, changes hardware configuration in the
link_validate() callback. This can result in started streams with
misconfigured hardware.
In the concrete example, the ipu2_csi1 is driven by a parallel video
input. After the media pipeline has been started with this
configuration, a second stream is configured to use ipu1_csi0 with
MIPI-CSI input from imx6-mipi-csi2. This may require the reconfiguration
of ipu1_csi0 with ipu_set_csi_src_mux(). Since the media pipeline is
already running, link_validate won't be called, and the ipu1_csi0 won't
be reconfigured. The resulting video is broken, because the ipu1_csi0 is
misconfigured, but no error is reported.
Move ipu_set_csi_src_mux from csi_link_validate to csi_start to ensure
that input to ipu1_csi0 is configured correctly when starting the
stream. This is a local reconfiguration in ipu1_csi0 and is possible
while the media pipeline is running.
Since csi_start() is called with priv->lock already locked,
csi_set_src() must not lock priv->lock again. Thus, the mutex_lock() is
dropped.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Fixes: 4a34ec8e470c ("[media] media: imx: Add CSI subdev driver") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced ata_scsi_requeue_deferred_qc() to handle commands deferred
during resets or NCQ failures. This deferral logic completed commands
with DID_SOFT_ERROR to trigger a retry in the SCSI mid-layer.
However, DID_SOFT_ERROR is subject to scsi_cmd_retry_allowed() checks.
ATA PASS-THROUGH commands sent via SG_IO ioctl have scmd->allowed set
to zero. This causes the mid-layer to fail the command immediately
instead of retrying, even though the command was never actually issued
to the hardware.
Switch to DID_REQUEUE to ensure these commands are inserted back into
the request queue regardless of retry limits.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Poenaru [Tue, 19 May 2026 17:48:16 +0000 (10:48 -0700)]
fuse: avoid 0x10 fault in fuse_readahead when max_pages == 0
[ Upstream commit 4ea907108a5c ("fuse: use iomap for readahead") ]
The upstream fix is the iomap conversion in commit 4ea907108a5c
("fuse: use iomap for readahead"), which rewrote fuse_readahead()
entirely and removed the buggy loop along with it. That refactor
is too invasive to backport to the pre-iomap readahead path still
used by 6.18.y (and earlier stable branches), so this is a minimal,
equivalent fix to the same bug on those branches.
When fc->max_read is smaller than PAGE_SIZE (common on aarch64 with
64K base pages if the FUSE server advertises a small max_read in INIT),
max_pages = min(fc->max_pages, fc->max_read / PAGE_SIZE) is 0, so
cur_pages is 0 on every outer iteration.
fuse_io_alloc(NULL, 0) then calls fuse_folios_alloc(0, ...), which
calls kzalloc(0, ...) and gets back ZERO_SIZE_PTR == (void *)16.
The "if (!ia->ap.folios)" guard in fuse_io_alloc does not catch
ZERO_SIZE_PTR, so fuse_io_alloc happily returns an ia whose
ap.folios is 0x10.
The inner "while (pages < cur_pages)" loop runs zero times, then
fuse_send_readpages(ia, ...) dereferences ap->folios[0] in
folio_pos(), faulting at virtual address 0x10:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
fuse_readahead+0x14c/0x490
read_pages+0x80/0x318
page_cache_ra_unbounded+0x1c0/0x2b0
page_cache_ra_order+0xb8/0x368
page_cache_sync_ra+0x210/0x320
filemap_get_pages+0x290/0xdb0
generic_file_read_iter+0xd0/0x540
fuse_file_read_iter+0x8c/0x158
__arm64_sys_read+0x1a0/0x488
addr2line on the aarch64 vmlinux maps fuse_readahead+0x14c to
fs/fuse/file.c:897 inlined into :999, i.e. "folio_pos(ap->folios[0])"
inside fuse_send_readpages. The faulting instruction "ldr x8, [x8]"
loads ap->folios[0]; ap->folios was previously loaded as 0x10
(ZERO_SIZE_PTR).
Without this fix the function would also spin forever, since
"nr_pages -= pages" makes no progress when pages stays 0; in practice
the NULL deref masks the spin.
Bail out of the outer loop if cur_pages is 0 -- there is no work we
can issue via FUSE in this iteration, and remaining folios will be
handled by read_pages() falling back to ->read_folio.
When building for 32-bit platforms, for which 'size_t' is
'unsigned int', there are warnings around using the incorrect format
specifier to print bsize in hid_report_raw_event():
drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
| ~~~
| %zu
2054 | report->id, csize, bsize);
| ^~~~~
drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
| ~~~
| %zu
2076 | report->id, rsize, bsize);
| ^~~~~
Use the proper 'size_t' format specifier, '%zu', to clear up the
warnings.
Cc: stable@vger.kernel.org Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event") Reported-by: Miguel Ojeda <ojeda@kernel.org> Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Fixes: 73f91b004321 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications") Reported-by: Yuhao Jiang <danisjiang@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if (!memslot || (offset + __fls(mask)) >= memslot->npages)
return;
but offset is u64 and the addition is unchecked. The check can be
silently bypassed by a u64 wrap.
The dirty ring backing those entries is MAP_SHARED at
KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the
slot and offset fields of any entry between when the kernel pushes
them and when KVM_RESET_DIRTY_RINGS consumes them. On reset,
kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds
them straight back into this check; only the flags handshake is
treated as the handover, the slot/offset payload is taken on trust.
makes the coalescing loop in kvm_dirty_ring_reset() compute
delta = (s64)(0 - 0xffffffffffffffc1) = 63
which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the
existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn()
call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;
the sum is 0 in u64 and the bounds check passes.
That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()
unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==
true, i.e. shadow paging, any VM that has allocated shadow roots, or
a write-tracked slot -- it reaches gfn_to_rmap(), which indexes
slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an
out-of-bounds load of a kvm_rmap_head, followed by a conditional
clear of PT_WRITABLE_MASK in whatever the loaded pointer points at.
The path is reachable from any process holding /dev/kvm.
Range-check offset on its own first, so the addition cannot wrap.
memslot->npages is bounded well below U64_MAX, so once offset <
npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG)
stays in range.
AUDIT_ADD_RULE and AUDIT_DEL_RULE correctly check for AUDIT_LOCKED
and return -EPERM, but AUDIT_TRIM and AUDIT_MAKE_EQUIV do not. This
allows a process with CAP_AUDIT_CONTROL to modify directory tree
watches and equivalence mappings even when the audit configuration
has been locked, undermining the purpose of the lock.
Add AUDIT_LOCKED checks to both commands.
Cc: stable@vger.kernel.org Reviewed-by: Ricardo Robaina <rrobaina@redhat.com> Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Sergio Correia <scorreia@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Fixes: 21fb59ab4b976 ("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn") Suggested-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20260504230141.484743-2-mario.limonciello@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable@kernel.org Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy") Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-4-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_cg_pool_unlocked() handles allocation failures under dmemcg_lock by
dropping the lock, preallocating a pool with GFP_KERNEL, and retrying the
locked lookup and creation path.
If the fallback allocation fails too, pool remains NULL. Since the loop
condition is while (!pool), the function can keep retrying instead of
propagating the allocation failure to the caller.
Set pool to ERR_PTR(-ENOMEM) when the fallback allocation fails so the
loop exits through the existing common return path. The callers already
handle ERR_PTR() from get_cg_pool_unlocked(), so this restores the
expected error path.
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008.
Cc: stable@vger.kernel.org Fixes: e68b75a027bb ("When the capset syscall is used it is not possible for audit to record the actual capbilities being added/removed. This patch adds a new record type which emits the target pid and the eff, inh, and perm cap sets.") Reviewed-by: Ricardo Robaina <rrobaina@redhat.com> Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Sergio Correia <scorreia@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
process_register_request() allocates an expectation and then checks
whether a conntrack helper is available. If helper lookup fails, the
function returns early and the allocated expectation is left behind.
Reorder the code to fetch and validate helper before calling
nf_ct_expect_alloc(). This keeps the logic simpler and removes the leak
path while preserving existing behavior.
Fixes: e14575fa7529 ("netfilter: nf_conntrack: use rcu accessors where needed") Cc: stable@vger.kernel.org Signed-off-by: Li Xiasong <lixiasong1@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For WQ_UNBOUND workqueues, alloc_and_link_pwqs() allocates wq->cpu_pwq
via alloc_percpu() and then calls apply_workqueue_attrs_locked(). On
failure it returns the error directly, bypassing the enomem: label
which holds the only free_percpu(wq->cpu_pwq) in this function.
The caller's error path kfree()s wq without touching wq->cpu_pwq,
leaking one percpu pointer table (nr_cpu_ids * sizeof(void *) bytes) per
failed call.
This agressively bypasses run_to_parity and slice protection with the
assumpiton that this is what waker wants but there is no garantee that
the wakee will be the next to run. It is a better choice to use
yield_to_task or WF_SYNC in such case.
This increases the number of resched and preemption because a task becomes
quickly "ineligible" when it runs; We update the task vruntime periodically
and before the task exhausted its slice or at least quantum.
Example:
2 tasks A and B wake up simultaneously with lag = 0. Both are
eligible. Task A runs 1st and wakes up task C. Scheduler updates task
A's vruntime which becomes greater than average runtime as all others
have a lag == 0 and didn't run yet. Now task A is ineligible because
it received more runtime than the other task but it has not yet
exhausted its slice nor a min quantum. We force preemption, disable
protection but Task B will run 1st not task C.
Sidenote, DELAY_ZERO increases this effect by clearing positive lag at
wake up.
Fixes: e837456fdca8 ("sched/fair: Reimplement NEXT_BUDDY to align with EEVDF goals") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260123102858.52428-1-vincent.guittot@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure to only call pick_next_entity() on an non-empty cfs_rq.
The assumption that p is always enqueued and not delayed, is only true for
wakeup. If p was moved while delayed, pick_next_entity() will dequeue it and
the cfs might become empty. Test if there are still queued tasks before trying
again to determine if p could be the next one to be picked.
There are at least 2 cases:
When cfs becomes idle, it tries to pull tasks but if those pulled tasks are
delayed, they will be dequeued when attached to cfs. attach_tasks() ->
attach_task() -> wakeup_preempt(rq, p, 0);
A misfit task running on cfs A triggers a load balance to be pulled on a better
cpu, the load balance on cfs B starts an active load balance to pulled the
running misfit task. If there is a delayed dequeue task on cfs A, it can be
pulled instead of the previously running misfit task. attach_one_task() ->
attach_task() -> wakeup_preempt(rq, p, 0);
Fixes: ac8e69e69363 ("sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260503104503.1732682-1-vincent.guittot@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Move INIT_DELAYED_WORK(gf_stats_work) to before mana_create_eq(),
while keeping schedule_delayed_work() at its original location.
Previously, if any function between mana_create_eq() and the
INIT_DELAYED_WORK call failed, mana_probe() would call mana_remove()
which unconditionally calls cancel_delayed_work_sync(gf_stats_work)
in __flush_work() or debug object warnings with
CONFIG_DEBUG_OBJECTS_WORK enabled.
Fixes: be4f1d67ec56 ("net: mana: Add standard counter rx_missed_errors") Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Link: https://patch.msgid.link/20260420124741.1056179-3-ernis@linux.microsoft.com Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from
mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan().
mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can
invoke the driver's remove path and free the gdma_context associated
with the device. After returning, mana_serv_reset() currently jumps to
the out label and attempts to clear gc->in_service, dereferencing a
freed gdma_context.
The issue was observed with the following call logs:
[ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d
[ 698.943121] #PF: supervisor write access in kernel mode
[ 698.943423] #PF: error_code(0x0002) - not-present page
[S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0
0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI
tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1
...
[Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16 000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000
[Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405
[Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000
[Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0
[Sat Dec 6 07:50:56 2025] Call Trace:
[Sat Dec 6 07:50:56 2025] <TASK>
[Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana]
[Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350
[Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0
[Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200
[Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30
[Sat Dec 6 07:50:56 2025] </TASK>
Fix this by returning immediately after mana_serv_rescan() to avoid
accessing GC state that may no longer be valid.
Fixes: 9bf66036d686 ("net: mana: Handle hardware recovery events when probing the device") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20251218131054.GA3173@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine.
Fixes: 3f47e67dff1f7 ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260417-airoha_qdma_cleanup_tx_queue-fix-net-v4-1-e04bcc2c9642@kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to respect the original descriptor order and avoid any
potential IOMMU fault or memory corruption, move pending queue entries
to the head of hw queue tx_list if the DMA mapping of current inflight
packet fails in airoha_dev_xmit routine.
The patch 'Replace atoi() with a robust strtoi()' introduced a bug
in parse_cpu_set(), which relies on partial parsing of the input string.
The function parses CPU specifications like '0-3,5' by incrementing
a pointer through the string. strtoi() rejects strings with trailing
characters, causing parse_cpu_set() to fail on any CPU list with
multiple entries.
Restore the original use of atoi() in parse_cpu_set().
Fixes: 7e9dfccf8f11 ("rtla: Replace atoi() with a robust strtoi()") Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20260112192642.212848-2-costa.shul@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code has a copy and paste bug where it accidentally checks "if (err)"
instead of checking if "xsi_rsts" is NULL. Also, as a free bonus, I
changed the allocation from kzalloc() to kcalloc() which is a kernel
hardening measure to protect against integer overflows.
Fixes: 5863b4e065e2 ("net: airoha: Add airoha_eth_soc_data struct") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/aPtht6y5DRokn9zv@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jenny reported that in sync_linked_regs() the BPF_ADD_CONST32 flag is
checked on known_reg (the register narrowed by a conditional branch)
instead of reg (the linked target register created by an alu32 operation).
Example case with reg:
1. r6 = bpf_get_prandom_u32()
2. r7 = r6 (linked, same id)
3. w7 += 5 (alu32 -- r7 gets BPF_ADD_CONST32, zero-extended by CPU)
4. if w6 < 0xFFFFFFFC goto safe (narrows r6 to [0xFFFFFFFC, 0xFFFFFFFF])
5. sync_linked_regs() propagates to r7 but does NOT call zext_32_to_64()
6. Verifier thinks r7 is [0x100000001, 0x100000004] instead of [1, 4]
Since known_reg above does not have BPF_ADD_CONST32 set above, zext_32_to_64()
is never called on alu32-derived linked registers. This causes the verifier
to track incorrect 64-bit bounds, while the CPU correctly zero-extends the
32-bit result.
The code checking known_reg->id was correct however (see scalars_alu32_wrap
selftest case), but the real fix needs to handle both directions - zext
propagation should be done when either register has BPF_ADD_CONST32, since
the linked relationship involves a 32-bit operation regardless of which
side has the flag.
Example case with known_reg (exercised also by scalars_alu32_wrap):
Hence, fix it by checking for (reg->id | known_reg->id) & BPF_ADD_CONST32.
Moreover, sync_linked_regs() also has a soundness issue when two linked
registers used different ALU widths: one with BPF_ADD_CONST32 and the
other with BPF_ADD_CONST64. The delta relationship between linked registers
assumes the same arithmetic width though. When one register went through
alu32 (CPU zero-extends the 32-bit result) and the other went through
alu64 (no zero-extension), the propagation produces incorrect bounds.
Example:
r6 = bpf_get_prandom_u32() // fully unknown
if r6 >= 0x100000000 goto out // constrain r6 to [0, U32_MAX]
r7 = r6
w7 += 1 // alu32: r7.id = N | BPF_ADD_CONST32
r8 = r6
r8 += 2 // alu64: r8.id = N | BPF_ADD_CONST64
if r7 < 0xFFFFFFFF goto out // narrows r7 to [0xFFFFFFFF, 0xFFFFFFFF]
At the branch on r7, sync_linked_regs() runs with known_reg=r7
(BPF_ADD_CONST32) and reg=r8 (BPF_ADD_CONST64). The delta path
computes:
Then, because known_reg->id has BPF_ADD_CONST32, zext_32_to_64(r8) is
called, truncating r8 to [0, 0]. But r8 used a 64-bit ALU op -- the
CPU does NOT zero-extend it. The actual CPU value of r8 is
0xFFFFFFFE + 2 = 0x100000000, not 0. The verifier now underestimates
r8's 64-bit bounds, which is a soundness violation.
Fix sync_linked_regs() by skipping propagation when the two registers
have mixed ALU widths (one BPF_ADD_CONST32, the other BPF_ADD_CONST64).
Lastly, fix regsafe() used for path pruning: the existing checks used
"& BPF_ADD_CONST" to test for offset linkage, which treated
BPF_ADD_CONST32 and BPF_ADD_CONST64 as equivalent.
Fixes: 7a433e519364 ("bpf: Support negative offsets, BPF_SUB, and alu32 for linked register tracking") Reported-by: Jenny Guanni Qu <qguanni@gmail.com> Co-developed-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260319211507.213816-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override(). That
depends on the driver_override.lock added by cb3d1049f4ea ("driver core:
generalize driver_override in struct device").
The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.
Initialize the temporary pci_dev to fix this.
Repro:
Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
register_lock_class+0x77e/0x790
lock_acquire+0xbf/0x2e0
pci_match_device+0x24/0x180
new_id_store+0x189/0x1d0
kernfs_fop_write_iter+0x14f/0x210
vfs_write+0x263/0x5e0
ksys_write+0x79/0xf0
do_syscall_64+0x117/0xf80
Fixes: 10a4206a2401 ("PCI: use generic driver_override infrastructure") Fixes: 8895d3bcb8ba ("PCI: Fail new_id for vendor/device values already built into driver") Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
