Ondřej Surý [Tue, 11 Aug 2020 14:14:36 +0000 (16:14 +0200)]
Update and cleanup the readline library support
This commit updates and simplifies the checks for the readline support
in nslookup and nsupdate:
* Change the autoconf checks to pkg-config only, all supported
libraries have accompanying .pc files now.
* Add editline support in addition to libedit and GNU readline
* Add isc/readline.h shim header that defines dummy readline()
function when no readline library is available
Mark Andrews [Thu, 13 Aug 2020 02:18:57 +0000 (12:18 +1000)]
dns_rdata_fromwire_text fixes:
* Disallow compression pointers in names as we are not
reading from a packet and as a result length checks fail.
* Increase totext buffer size as fuzzer ran out of space on
big bitmaps.
* NUL terminate totext to make fault diagnosis easier.
* Add debugging messages to make fault diagnosie easier.
Mark Andrews [Thu, 13 Aug 2020 00:22:49 +0000 (10:22 +1000)]
base32_decode*() could incorrectly decode a input.
base32_decode_char() added a extra zero octet to the output
if the fifth character was a pad character. The length
of octets to copy to the output was set to 3 instead of 2.
Matthijs Mekking [Mon, 10 Aug 2020 15:09:44 +0000 (17:09 +0200)]
Fix check next key event check in kasp test
Prevent intermittent false positives on slow platforms by subtracting
the number of seconds which passed between key creation and invoking
'rndc dnssec -checkds'.
This particularly fails for the step3.csk-roll2.autosign zone because
the closest next key event is when the zone signatures become
omnipresent. Running 'rndc dnssec -checkds' some time later means
that the next key event is in fact closer than the calculated time
and thus we need to adjust the expected time by the time already
passed.
Ondřej Surý [Wed, 12 Aug 2020 19:06:26 +0000 (21:06 +0200)]
Add explicit support of OSS-Fuzz
The --enable-fuzzing option now allows third choice "ossfuzz" that just
adds $LIB_FUZZING_ENGINE to FUZZ_LDFLAGS to make the fuzzer builds
compatible with OSS-Fuzz project that has some special quirks (the
main() routine is provided in the static library the project provides).
Ondřej Surý [Wed, 12 Aug 2020 13:19:23 +0000 (15:19 +0200)]
Allow static linking in the developer mode
Previously, we have disallowed static linking (for good reasons).
However, there are legitimate reasons where static linking might be
useful, and one of the reasons is the OSS-Fuzz project that doesn't have
the libraries used for build, so static linking is the sane option here.
The static linking is still disallowed in the "production" builds, but
it's not possible to disable shared and enable static libraries when
used together with --enable-developer.
Ondřej Surý [Wed, 12 Aug 2020 09:29:30 +0000 (11:29 +0200)]
Really fuzz isc_lex_getmastertoken() in the test
There was a copy&paste error in fuzz/isc_lex_getmastertoken.c where we
didn't really test the function we wanted to test. Update the test to
have the input data to always include expected 'tokentype' in the first
byte, `eol` argument in the second byte and the rest of the input is the
data to parse.
Mark Andrews [Fri, 7 Aug 2020 08:00:41 +0000 (18:00 +1000)]
Address use after free between view, resolver and nta.
Hold a weak reference to the view so that it can't go away while
nta is performing its lookups. Cancel nta timers once all external
references to the view have gone to prevent them triggering new work.
Ondřej Surý [Mon, 10 Aug 2020 07:02:30 +0000 (09:02 +0200)]
Reduce the default RBT hash table size to 16 entries (4 bits)
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
Michał Kępień [Fri, 7 Aug 2020 12:35:05 +0000 (14:35 +0200)]
Do not run "make recheck" if the test suite fails
Running "make recheck" after the test suite fails hides intermittent
system test failures in GitLab CI. This makes it hard to identify which
branches are affected by a particular test failure mode and causes CI
results to be overly optimistic. Prevent "make recheck" from being run
when "make check" fails to ensure GitLab CI results properly reflect the
stability of the "main" branch.
Make sure the 'checkds' command correctly sets the right key timing
metadata and also make sure that it rejects setting the key timing
metadata if there are multiple keys with the KSK role and no key
identifier is provided.
With 'checkds' replacing 'parent-registration-delay', the kasp
test needs the expected times to be adjusted. Also the system test
needs to call 'rndc dnssec -checkds' to progress the rollovers.
Since we pretend that the KSK is active as soon as the DS is
submitted (and parent registration delay is no longer applicable)
we can simplify the 'csk_rollover_predecessor_keytimes' function
to take only one "addtime" parameter.
This commit also slightly changes the 'check_dnssecstatus' function,
passing the zone as a parameter.
Don't strip off the final character when printing times in key files.
With the introduction of 'rndc dnssec -status' we introduced
'isc_stdtime_tostring()'. This changed in behavior such that it was no
longer needed to strip of the final '\n' of the string format
datetime. However, in 'printtime()' it still stripped the final
character.
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
Michał Kępień [Wed, 5 Aug 2020 10:04:59 +0000 (12:04 +0200)]
Remove arm64 jobs from GitLab CI
The only arm64 runner we have at our disposal is suffering from
intermittent connectivity issues which make it unusable for extended
periods of time. Remove arm64 jobs from GitLab CI until we manage to
set up an arm64 runner with more reliable connectivity.
Michał Kępień [Wed, 5 Aug 2020 07:04:53 +0000 (09:04 +0200)]
Set "max-cache-size" in the "geoip2" system test
The named configuration files used in the "geoip2" system test cause a
rather large number of views (6-8) to be set up in each tested named
instance. Each view has its own cache.
Commit e24bc324b455d9cad7b51acd3d5c7b4e40c66187 caused the RBT hash
table to be pre-allocated to a size derived from "max-cache-size", so
that it never needs to be rehashed. The size of that hash table is not
expected to be significant enough to cause memory use issues in typical
conditions even for large "max-cache-size" settings.
However, these two factors combined can cause memory exhaustion issues
in GitLab CI, where we run multiple "instances" of the test suite in
parallel on the same runner, each test suite executes multiple system
tests concurrently, and each system test may potentially start multiple
named instances at the same time. In practice, this problem currently
only seems to be affecting the "geoip2" system test, which is failing
intermittently due to named instances used by that test getting killed
by oom-killer.
Prevent the "geoip2" system test from failing intermittently by setting
"max-cache-size" in named configuration files used in that test to a low
value in order to keep memory usage at bay even with a large number of
views configured.
Mark Andrews [Wed, 22 Jul 2020 23:47:49 +0000 (09:47 +1000)]
Map DNS_R_BADTSIG to FORMERR
Now that the log message has been printed set the result code to
DNS_R_FORMERR. We don't do this via dns_result_torcode() as we
don't want upstream errors to produce FORMERR if that processing
end with DNS_R_BADTSIG.
Expire the 0 TTL RRSet quickly rather using them for serve-stale
When a received RRSet has TTL 0, they would be preserved for
serve-stale (default `max-stale-cache` is 12 hours) rather than expiring
them quickly from the cache database.
This commit makes sure the RRSet didn't have TTL 0 before marking the
entry in the database as "stale".
Add stale-cache-enable option and disable serve-stable by default
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
Add fuzzing for the isc_lex (isc_lex_gettoken,isc_lex_getmastertoken) API
In this commit, the simple fuzzing tests for the isc_lex_gettoken() and
isc_lex_getmastertoken() functions have been added.
As part of this commit, the initialization has been moved from fuzz.h
constructor/destructor to LLVMFuzzerInitialize() in each fuzz test. The
main.c of no-fuzzing and AFL modes have been modified to run the
LLVMFuzzerInitialize() at the start of the main() function mimicking
the libfuzzer mode of operation.
The fuzzing tests were temporarily disabled when the build system has been
converted to automake. This commit restores the functionality to run the
fuzzing tests as part of the `make check`. When the afl or libfuzzer
is enabled via ./configure, it uses a custom LOG_DRIVER (fuzz/<fuzzer.sh>).
Currently only libfuzzer.sh has been implemented that runs each fuzz
test for 5 seconds each.
netmgr: retry binding with IP_FREEBIND when EADDRNOTAVAIL is returned.
When a new IPv6 interface/address appears it's first in a tentative
state - in which we cannot bind to it, yet it's already being reported
by the route socket. Because of that BIND9 is unable to listen on any
newly detected IPv6 addresses. Fix it by setting IP_FREEBIND option (or
equivalent option on other OSes) and then retrying bind() call.
projects / thirdparty / bind9.git / log
