Previously, the packet.pl script was used to send the a series of frames
to named; this worked by accident as most of these were refused by the
kernel with EAGAIN. packet.pl prints a dot every 1000 packets, so this
slowed the script donw and allowed some frames to get through.
Reimplement the test in Python: build the packet with dnspython, send
~6 MiB of data over TCP discarding all replies and then check if the
server is still alive.
Add Python helpers for inspecting `rndc status`, opening probe
connections, and waiting for counter changes, then use them to port the
TCP and recursive high-water checks from the shell script.
Connections are now managed by the test script directly removing the
need for the ans6 server. This also removes the need for the send.pl
script and the respective shell test helper as they were used to control
said server.
Add a helper that runs `rndc stats` and reads the TCP request counter
from named.stats, then use it to port the resolver and forwarder checks
from the shell script to tests_tcp.py. Record named.stats as an extra
artifact so the generated statistics remain available after test runs.
Use isctest.query.create() and a shared round-trip helper in
bin/tests/system/tcp/tests_tcp.py, add type hints, and reorganize the
existing tests to follow current style.
fix: dev: Remove unneeded options in dns_zonefetch
In the `dns_zonefetch` mechanism, some option flags for
`dns_resolver_createfetch()` were used for all fetches, but
were actually only needed by the `DNSKEY` refresh fetches.
(Specifially, these options were `DNS_FETCHOPT_UNSHARED`
and `DNS_FETCHOPT_NOCACHED`, which were used along with
`DNS_FETCHOPT_NOVALIDATE` to ensure we get a new copy of
the DNSKEY as it is currently published by the authority,
without prior validation. Those conditions are needed
for RFC 5011 trust anchor maintenace, but not when looking
up parent-`NS` or `DSYNC` RRsets.)
In the dns_zonefetch mechanism, some option flags for
dns_resolver_createfetch() were used for all fetches, but
were actually only needed by the DNSKEY refresh fetches.
(Specifially, these options were DNS_FETCHOPT_UNSHARED
and DNS_FETCHOPT_NOCACHED, which were used along with
DNS_FETCHOPT_NOVALIDATE to ensure we get a new copy of
the DNSKEY as it is currently published by the authority,
without prior validation. Those conditions are needed
for RFC 5011 trust anchor maintenace, but not when looking
up parent-NS or DSYNC RRsets.)
new: dev: Add DTRACE probes to the delegation cache
The new delegation cache, which stores NS-based and DELEG-based delegations per view, is now instrumented
with static user-space tracing probes so that cache hit rate, insertion and lookup latency, eviction pressure
under memory limits, and removals triggered by rndc flush-delegation can be observed on a running named.
Merge branch 'ondrej/delegdb-dtrace-probes' into 'main'
Introduces a top-level dtrace/ directory for user-contributed trace
scripts that consume the USDT probes exported by libdns, libns, and
libisc. Ships with delegdb-trace.stp, which streams every insertion,
eviction, and rndc flush-delegation removal in the delegation cache,
and a README pointing at the provider files and explaining how to list
and run the probes on Linux (SystemTap) and on FreeBSD/macOS (DTrace).
Instrument the delegation cache (introduced to back both NS-based and
DELEG-based delegations) with 11 USDT probes in the libdns provider so
that hit rate, eviction pressure, and lookup latency can be measured
without recompiling or enabling logging.
The probes are:
- delegdb_lookup_start / delegdb_lookup_done wrap dns_delegdb_lookup()
and pass the query name plus the result code.
- delegdb_insert_start / delegdb_insert_done wrap dns_delegset_insert().
The early SHUTTINGDOWN return is funneled through the cleanup label
so the done probe fires on every path.
- delegdb_cleanup_start / delegdb_cleanup_done bracket the SIEVE-based
eviction triggered when the cache goes overmem, reporting the number
of bytes requested and actually reclaimed. An additional per-node
delegdb_evict probe (guarded by _ENABLED() because it fires inside
the loop) exposes which zones are being evicted.
- delegdb_create, delegdb_reuse, and delegdb_shutdown trace the per-view
lifecycle across server reloads.
- delegdb_delete traces rndc flush-delegation paths, reporting whether
a subtree or single name was removed.
Name arguments are stringified with dns_name_format() behind
LIBDNS_*_ENABLED() guards so that the hot lookup and insert paths remain
zero-cost when no consumer is attached.
fix: dev: Fix inverted gethostname() check in rndc status
The replacement of named_os_gethostname() with raw gethostname()
inverted the success check: the "localhost" fallback runs on success,
and on failure the uninitialized hostname buffer is read by snprintf(),
leaking stack memory via the rndc status reply.
Closes #5889
Merge branch '5889-fix-gethostname-inverted-check' into 'main'
When named_os_gethostname() was replaced with raw gethostname(), the
success/failure polarity was flipped: the fallback to "localhost" now
runs on success and the hostname buffer is left uninitialized on
failure. In the failure path, snprintf() then reads the uninitialized
stack buffer, disclosing stack contents via the rndc status reply.
Replace the less obvious and less explicit `struct.unpack()` and
`struct.pack()` calls with calls to `int.from_bytes()` and
`int.to_bytes()`, respectively.
Štěpán Balážik [Mon, 19 Jan 2026 20:49:36 +0000 (21:49 +0100)]
Fix FallbackTooManyRecordsAxfrHandler to follow convention
All the other subclasses AxfrHandler send three messages.
This oversight was inherited from the original Perl implementation of
the server and was not fixed in 46ecbbe where it was rewritten.
This allows refactoring and sharing of the superclass.
fix: usr: Fix named crash when processing SIG records in dynamic updates
Previously, :iscman:`named` could abort if a client sent a dynamic update containing a SIG record (the legacy signature type) to a zone configured with an update-policy. The function `dns_db_findrdataset` had an incorrect requirements prerequisite that prevented SIG records being looked up, which was triggered as part of processing an UPDATE request and could be triggered remotely by any client permitted to send updates. This has been fixed by ensuring that SIG records are handled consistently with RRSIG records during update processing.
Make sure the nameserver correctly handles SIG records in the
prerequisites of the dynamic update. The first check is to ensure that
the prerequisites are not examined prior to checking the credentials.
The second test case checks that the SIG present prerequisite is
examined and therefore refuses the update. Also this should not trigger
an assertion failure in dns__db_findrdataset() (due to the REQUIRE()
only accepted dns_rdatatype_rrsig when the covers parameter was set).
Add AXFR regression test for SIG covers preservation
diff.c rdata_covers() runs on both dns_diff_apply (IXFR, ns/update.c
dynamic updates) and dns_diff_load (AXFR). After the previous commit
refused SIG and NXT in dynamic updates, the AXFR path remains the
most natural way to drive legacy SIG records into a secondary's zone
DB and regression-gate the rdata_covers() fix.
The test adds ans11 as an AsyncDnsServer primary for a small zone
whose AXFR carries two SIG rdatas at the same owner with different
covered types (A, MX) and different TTLs (600, 1200), and declares
ns6 a secondary of that zone. With the bug present, dns_diff_load
groups both tuples at typepair (SIG, 0) and the MX-covering record
inherits the first-seen TTL (600); the fix keeps them at (SIG, A)
and (SIG, MX) with their original TTLs.
rndc dumpdb -zones on the secondary is used to inspect stored state
directly, because the wire-level SIG query response merges
same-(owner,type,class) RRs and masks the per-rdataset TTLs.
SIG (24) and NXT (30) are obsolete DNSSEC record types, superseded by
RRSIG and NSEC in RFC 3755. Allowing them through dynamic update
exposes two distinct bugs that the surrounding GL#5818 work already
fixes as defense-in-depth:
- dns__db_findrdataset() used to REQUIRE that (covers == 0 ||
type == RRSIG), which aborts named when a SIG update reaches the
prescan foreach_rr() call. Fixed to accept dns_rdatatype_issig().
- diff.c rdata_covers() used to test only RRSIG, dropping the
covered-type field for SIG rdatas; the zone DB then filed every
SIG rdataset under typepair (SIG, 0) instead of
(SIG, covered_type) and follow-up adds collided at that bucket.
Fixed to use dns_rdatatype_issig().
Both underlying bugs are still reachable via inbound zone transfer
(diff.c rdata_covers() runs from both dns_diff_apply on the IXFR path
and dns_diff_load on the AXFR path), so the type-helper fixes above
remain necessary. For the dynamic-update path, the simplest and
safest posture is to refuse SIG and NXT outright at the front door in
ns/update.c, alongside the existing NSEC/NSEC3/non-apex-RRSIG
refusals. KEY remains permitted because it is still used to carry
public keys for SIG(0) transaction authentication.
The existing tcp-self SIG regression test is repointed to assert
REFUSED on the SIG add, a symmetric NXT test is added, and the
SIG-via-dyn-update covers-bucket test is removed because it is no
longer reachable through this entry point; AXFR-based coverage of
diff.c rdata_covers() follows in a separate commit.
Add regression test for SIG covers being dropped in dns_diff_apply
rdata_covers() in lib/dns/diff.c tests `type == dns_rdatatype_rrsig`
instead of dns_rdatatype_issig(), so for a legacy SIG (24) rdata it
returns 0 and the covered type is discarded on the dynamic-update /
IXFR path. The zone DB then files every SIG rdataset under typepair
(SIG, 0) instead of (SIG, covered_type), and a follow-up add with a
different covers field but a different TTL collides at that bucket,
trips DNS_DBADD_EXACTTTL in qpzone, returns DNS_R_NOTEXACT, and comes
back to the client as SERVFAIL.
The new test adds a PTR to establish the node (tcp-self requires the
client IP's reverse form to equal the owner), then two SIG updates
with different covers and different TTLs; on a buggy build the second
update is SERVFAIL and named logs `dns_diff_apply: .../SIG/IN: add
not exact`. The test is expected to pass once rdata_covers() is
switched to dns_rdatatype_issig(), matching the fix already adopted
for dns__db_findrdataset() on this branch and the helper pattern used
in master.c, xfrout.c, and qpcache.c.
Fix dropped covers field for SIG records in dns_diff_apply
rdata_covers() in lib/dns/diff.c discriminated only on
dns_rdatatype_rrsig (46) and returned 0 for the legacy SIG (24), so
the covered-type field was silently discarded on the dynamic-update
and IXFR paths. Every SIG rdataset was then filed in the zone DB
under typepair (SIG, 0) instead of (SIG, covered_type); a second SIG
add with a different covers but a different TTL collided at that
bucket, tripped DNS_DBADD_EXACTTTL in qpzone, returned
DNS_R_NOTEXACT, and came back to the client as SERVFAIL.
Use dns_rdatatype_issig() here so both SIG and RRSIG carry their
covers through the diff, matching the helper pattern already used in
lib/dns/master.c, lib/ns/xfrout.c, lib/dns/qpcache.c, and the
dns__db_findrdataset() REQUIRE that the surrounding merge request
just relaxed.
Mark Andrews [Tue, 7 Apr 2026 14:39:57 +0000 (16:39 +0200)]
Fix assertion failure in dns_db_findrdataset() for SIG records
dns__db_findrdataset() had a REQUIRE() that only accepted
dns_rdatatype_rrsig when the covers parameter was set. A dynamic
update containing a SIG record (type 24) would trigger this
assertion, crashing named. Use dns_rdatatype_issig() to accept
both SIG and RRSIG.
fix: dev: Fix strict weak ordering violation in resign_sooner()
resign_sooner_values() only checked whether rhs was SOA-typed when
resign times were equal, but did not check lhs. When both entries were
SOA-typed with equal resign times, the comparison returned true in both
directions, violating irreflexivity and corrupting heap invariants.
Add lhs_typepair parameter and require lhs to be non-SOA for the
tie-breaking logic to apply.
Closes #5884
Merge branch '5884-heap-condition-fix' into 'main'
Fix strict weak ordering violation in resign_sooner()
resign_sooner_values() only checked whether rhs was SOA-typed when
resign times were equal, but did not check lhs. When both entries were
SOA-typed with equal resign times, the comparison returned true in both
directions, violating irreflexivity and corrupting heap invariants.
Add lhs_typepair parameter and require lhs to be non-SOA for the
tie-breaking logic to apply.
new: ci: Extend the prepare-release-announcement job to post release links
The prepare-release-announcement job is now extended so that after
creating the announcement MR, it posts a message with links to the newly
released versions to Mattermost.
Merge branch 'andoni/extend-prepare-release-announcement-with-urls-message' into 'main'
Extend the prepare-release-announcement job post release links
The prepare-release-announcement job is now extended so that after
creating the announcement MR, it posts a message with links to the newly
released versions to Mattermost.
new: doc: Document opt-in 🤖 marker for agent-authored issues and MRs
Add short notes in CONTRIBUTING.md telling automated agents to append
🤖 to the title of issues and merge requests so they can be routed
through the streamlined agent triage/merge process.
Merge branch 'ondrej/agent-contributing' into 'main'
Document opt-in 🤖 marker for agent-authored issues and MRs
Add short notes in CONTRIBUTING.md telling automated agents to append
🤖 to the title of issues and merge requests so they can be routed
through the streamlined agent triage/merge process.
fix: usr: Prevent excessive priming queries to the root servers
BIND was sending a priming query to the root servers on nearly every
recursive lookup instead of only when the cached root information
expired. Priming now rearms only after the TTL of the fetched records
elapses, and the refreshed root NS set is used for query routing until
the next cycle.
Merge branch 'ondrej/fix-delegdb-priming' into 'main'
Rename view->hints to view->rootdb and rearm priming
With the parent-centric resolver, dns_view_bestzonecut() consults the
delegation DB (view->deleg) rather than the main cache for the closest
zonecut. Root is never the target of a referral, so it never lands in
delegdb; bestzonecut therefore falls through to the hints lookup on
every query whose closest ancestor is root. prime_done() only called
dns_root_checkhints(), which logs discrepancies but does not update
any store bestzonecut looks at, so the fresh root NS records obtained
by priming were never used and priming kept re-firing.
Rename view->hints to view->rootdb and refresh it when a priming
fetch completes: the '.' NS rdataset is replaced with the fetched
one, and for each listed nameserver the matching A/AAAA glue is
copied from the response's ADDITIONAL section. Only glue for names
that actually appear as NS targets is accepted, so a hostile response
cannot inject unrelated records. Glue the response did not carry is
left untouched, so the hints-file records loaded at startup remain as
a fallback.
Each view gets its own rootdb: the previous shared
named_g_server->in_roothints is gone, and configure_view() calls
dns_rootns_create() per view when the class-IN defaults are needed.
That keeps the priming writer one-per-DB, so concurrent priming in
different views cannot race on the same zone-DB version.
The rootdb refresh runs synchronously from the resolver response path,
so records go straight from the wire into rootdb with no cache round
trip and no dependency on DNSSEC validation state. A new
DNS_FETCHOPT_PRIMING option marks the priming fetch; prime_done()
itself is now pure cleanup.
Track the rootdb freshness window in view->rootdb_expires and trigger
re-priming lazily from dns_view_find() and bestzonecut_rootdb() only
when the window has elapsed. Stale records are still served while the
fresh priming fetch is in flight.
Drop dns_root_checkhints() and its helpers; the rootdb is now the
authoritative source the resolver consults.
The :iscman:`named` process could terminate unexpectedly when
processing a catalog member zone containing special characters
like '%' or '$' which could be interpreted as zone filename tokens
and trigger a case-sensitivity bug in the token-parsing code. This
has been fixed.
Closes #5849
Merge branch '5849-catz-filename-and-token-parsing-fix' into 'main'
Treat '%' and '$' as special characters for catalog member zone names
The filename of the catalog member zones are generated dynamically
based on the zone's name. If the zone's name is too long or if it
contains special characters the name's digest is used instead.
Since '%' and '$' are now treated as special characters in the zone
names (see !10779), add these characters to the list of the special
characters.
A a test to check zone filename case-insensitivity
The test adds a catalog member zone which has '%X' in its name and
it ends up in the zone filename parser's code because the filename
is currently generated (by the catalog zone code) based on the zone's
name.
Zones which have a name with the '%' special character should be
filtered and their name's digest should be used instead for filenane
generation (like it is implemented for other special characters), and
that fix is coming next.
Fix case-sensitivity bug in zone filename token-parsing
The setfilename() function uses case-insensitive strcasestr() when
matching the possible tokens, but then one of the token parsers
uses case-sensitive INSIST checks which can assert when, for example,
matching '%X' and INSIST only accepts '%x'.
The case-insensitivity is documented, which means it's the parser
that needs to be fixed, not the matcher.
Convert the character to lowercase before checking the token's
validity.
fix: usr: Avoid extra round trips for DS lookups when the parent delegation is already cached
DS queries could take two unnecessary extra round trips when the resolver sent them to the child zone instead of the parent. The child responds with NODATA, forcing a recovery path to rediscover the parent delegation even though it was already cached. The resolver now consults its delegation cache before starting DS fetches, sending queries directly to the correct parent nameservers and eliminating the extra latency.
Colin Vidal [Wed, 15 Apr 2026 12:00:06 +0000 (14:00 +0200)]
Add system test for the chase DS fix
Add a system test which ensures, whenever the DS record can't be found
in the local cache, that the resolver first tries to get the parent NS
from the delegation cache to ask them the DS record, directly, rather
than running the fallback flow where the resolver attempts to query the
DS record from NS of the validating name (which would fails, then the
resolver would remove one label and fetch again, fails, and so on until
it reach the closest zonecut).
The test relies on the fact that when the fallback flow is run, the
`rctx_chaseds()` function is run, adding the "chase DS servers ..." and
"suspending DS lookup to find parent's..." logs.
Replace FIXME with rationale for not cleaning expired delegdb nodes
Expired delegation nodes are naturally replaced when the resolver
fetches fresh data, and any remaining stale nodes are reclaimed by
SIEVE eviction under memory pressure.
delegdb_cleanup() was overwriting the caller-supplied 'requested'
value with (hiwater - lowater), so every overmem cleanup tried to
free the full watermark band regardless of how much memory the new
delegation actually needed. Drop the override so the caller's size
is used: we now walk the SIEVE only until we have reclaimed enough
room for the new node, leaving unrelated entries in place.
Account transient delegsets against the caller's memory context
dns_delegset_fromnsrdataset() used isc_g_mctx for the transient
delegset it builds from a DNS NS rdataset. That hides delegation
data in the global default context instead of accounting it against
the subsystem that owns it: a resolver fctx, a view, or a query
context.
Take an explicit mctx parameter so callers can direct the allocation
to the right place, and update the three call sites:
- lib/dns/view.c:1189 (dns_view_bestzonecut fallback) uses view->mctx
- lib/dns/resolver.c:7071 (resume_dslookup) uses fctx->mctx
- lib/ns/query.c:8672 (query_delegation_recurse) uses the client
manager's mctx
Also tighten delegdb cleanup to run inside the same write transaction
as the insert: delegdb_node_prepare() now returns the size of the new
node, and delegdb_cleanup() takes the caller's open qp so that the
overmem reclamation and the insert share one commit instead of doing
two nested write transactions.
Fix delegation database NOEXACT lookup for top-level names
dns__deleg_lookup() with DNS_DBFIND_NOEXACT is supposed to return
the deepest proper ancestor of the lookup name. It called
getparentnode() to step up from an exact match, but getparentnode()
only iterated while the chain length was >= 2. When the chain
contained a single entry (the exact match itself with no ancestor
stored in the trie), the loop did not execute and left the caller
looking at the exact match. The subsequent isactive() check then
returned success and the function reported the exact match as the
"deepest ancestor", violating NOEXACT semantics.
This was observable as the resolver picking the child-side
delegation for an at-parent type (e.g. a DS query for a TLD), then
sending the query to the child's own nameservers and recovering via
the "chase DS servers" path.
Have getparentnode() set '*node' to NULL when it cannot find an
active proper ancestor, and make dns__deleg_lookup() NULL-check
before returning, matching the canonical NOEXACT implementation in
dns_zt_find(). Update the deleg unit test to expect NOTFOUND for
the top-level-no-parent case.
When the validator needs a DS RRset and the cache does not have it,
get_dsset() falls back to creating a fresh fetch. Without a hint, the
resolver picks the closest known zone cut for the DS query, and in the
parent-centric resolver that can land on a delegation at the DS owner
name itself (the child side). This can happens when the parent
delegation is expired, or if the zonecut of the parent doesn't match the
labels in the name.
Querying the child for its own DS records yields NODATA from the apex of
the zone, which sends the resolver into the "chase DS servers" recovery
path and costs two extra round trips for a parent delegation we already
had cached in the delegation database.
Look up the parent zone in the delegation database before kicking
off the fetch, and pass any usable delegation to the resolver as a
hint. When the hint is present, the resolver sends the DS query
straight to the parent's nameservers and the chase path is avoided
entirely.
To support this, create_fetch() now takes optional 'domain' and
'delegset' parameters that are forwarded to dns_resolver_createfetch().
All other call sites pass NULL.
rem: nil: Continue removal of license headers from test zones
Copyright license headers were removed from system test zone files in
commit f144db6b686, but this change only applied to files named '*.db',
'*.db.in', etc. There were some zone files called '*.zone' which were
left unchanged; these have been updated now as well.
Continue removal of license headers from test zones
Copyright license headers were removed from system test zone files in
commit f144db6b686, but this change only applied to files named '*.db',
'*.db.in', etc. There were some zone files called '*.zone' which were
left unchanged; these have been updated now as well.
Use virtualenv's Python interpreter when running tests from a venv
Meson bakes the absolute path of the detected Python binary (e.g.
/usr/bin/python3.12) into the PYTHON build variable. When tests are run
from a virtualenv, that stored path might point to the system Python
which lacks the virtualenv's installed packages, causing test failures.
Fix this by checking whether the current process is running inside a
virtualenv (sys.prefix != sys.base_prefix) and, if so, replacing the
stored PYTHON build var with sys.executable — the interpreter that is
already running pytest and has all required dependencies available.
The behaviour on EL8/EL9 (where meson prefers python3.12 over the older
platform default) and on FreeBSD (python3.11) is unchanged, since those
workflows run pytest without an active virtualenv in our CI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When a zone filename is defined in `named.conf` which will be
written to by the server - i.e., for secondary or dynamically updated
zones - there is a test at configuration time to ensure that the
filename is non-unique.
This test is run before the zone is actually created, so a zone
configured using a template may not have had its filename expanded
yet. This can cause a configuration to fail because, for example,
multiple zones appear to using the filename `$name.db`.
This has been fixed by adding a new function `dns_zone_expandzonefile()`
and calling it during the uniqueness check.
Mark Andrews [Thu, 2 Apr 2026 04:25:09 +0000 (15:25 +1100)]
Fix a bug with template filename reuse
When a zone filename is defined in named.conf which will be
written to by the server - i.e., secondary or dynamically updated
zones - there is a test at configuration time to ensure that the
filename is non-unique.
This test is run before the zone is actually created, so a zone
configured using a template may not have had its filename expanded
yet. This can cause a configuration to fail because, for example,
multiple zones appear to using the filename "$name.db".
This has been fixed by calling dns_zone_expandzonefile() from
isccfg_check_zoneconf(), to expand the names when checking for
uniqueness.
Mark Andrews [Thu, 2 Apr 2026 04:25:09 +0000 (15:25 +1100)]
Make zone filename expansion accessible from outside dns_zone
This adds a new API call dns_zone_expandzonefie(), which will enable
named-checkconf to expand filenames the same way the server does in
dns_zone_setfile().
Mark Andrews [Wed, 15 Apr 2026 01:36:50 +0000 (11:36 +1000)]
fix: usr: Remove unnecessary dns_name_free call
When processing a catalog zone member's primaries definition and
there is a TXT record containing an invalid name TSIG key name,
dns_name_free was incorrectly called triggering an assertion.
This has been fixed.
Closes #5858
Merge branch '5858-remove-unnecessary-dns-name-free-call' into 'main'
Mark Andrews [Fri, 10 Apr 2026 03:07:26 +0000 (13:07 +1000)]
Remove unnecessary dns_name_free call
When processing a catalog zone member's primaries definition and
there is a TXT record containing an invalid name TSIG key name,
dns_name_free was incorrectly called triggering an assertion.
This has been fixed.
The resolver can and will reuse outgoing TCP connections to the same host, as recommended by RFC 7766. This prevents a whole class of attacks that abuse the fact that establishing a TCP connection is expensive and it is fairly easy to deplete the outgoing TCP ports by putting them into TIME_WAIT state.
The number of pipelined queries per connection is capped at 256 to limit the impact of a connection drop.
Merge branch '3741-reuse-tcp-connections' into 'main'
Include disptype and transport in dispatch hash key
Move disptype and transport into dispatch_hash() and dispatch_match()
so that the match function is the single source of truth for whether
two TCP dispatches are interchangeable. This replaces the post-loop
disptype filter in dispatch_gettcp() and makes the disptype field in
struct dispatch_key actually used.
Ondřej Surý [Sun, 15 Mar 2026 06:52:34 +0000 (07:52 +0100)]
Use sequential per-dispatch message IDs for TCP
TCP dispentries no longer use the global QID hash table at all.
Responses are matched by scanning disp->active, and sequential
per-dispatch IDs (bounded by the pipelining limit) are unique
within a single dispatch by construction. Since TCP delivers
only data we asked for on a specific connection, the per-peer
uniqueness that the global table enforced was never actually
needed for TCP.
DNS_DISPATCHOPT_FIXEDID is plumbed through dns_request_createraw
-> get_dispatch -> dns_dispatch_createtcp so FIXEDID TCP requests
always get a fresh isolated dispatch — the caller-supplied ID
then cannot collide with any other in-flight query either.
Ondřej Surý [Sun, 15 Mar 2026 06:23:33 +0000 (07:23 +0100)]
Limit TCP pipelining per shared dispatch
Cap the number of in-flight queries on a single shared TCP dispatch.
When the limit is reached, the dispatch is removed from the hash
table so subsequent queries get a fresh connection. The existing
dispatch continues serving its queries until they complete.
This bounds the blast radius of a connection drop: at most N queries
fail simultaneously instead of all queries to that server.
The default limit is 256. It can be overridden for testing via
'named -T tcppipelining=N'.
Ondřej Surý [Sun, 15 Mar 2026 07:57:26 +0000 (08:57 +0100)]
Disable TCP pipelining in tcp and masterformat system test
Set tcppipelining=1 on recursive servers in the system tests to
restore one-query-per-connection behavior. The tests relies on
specific connection and query counting that breaks with TCP
connection sharing.
Ondřej Surý [Tue, 17 Feb 2026 10:05:33 +0000 (11:05 +0100)]
Implement seamless TCP connection reuse in dns_dispatch
Previously, the user of dns_dispatch API had to first call
dns_dispatch_gettcp() and if that failed create a new TCP dispatch with
dns_dispatch_createtcp(). This has been changed and the TCP connection
reuse happens transparently inside dns_dispatch_createtcp(). There are
separate buckets for dns_resolver, dns_request and dns_xfrin units, so
these don't get mixed together.
fix: usr: Fix 'rndc modzone' issue with non-existing zones
The :iscman:`named` process could terminate unexpectedly or become
subject to undefined behavior when issued an :option:`rndc modzone`
operation for a non-existing zone. This has been fixed.
Closes #5848
Merge branch '5848-do_modzone-unlock-bug-fix' into 'main'
The cleanup path always unlocks the 'view->newzone.lock' lock, but
there are 'goto cleanup;' operations even before the lock is locked,
which causes an assertion failure.
Don't use the cleanup path before the lock is locked.
Recently, a broken version of libuv was released breaking BIND on
several platforms. The offending [commit](https://github.com/libuv/libuv/issues/5030) was on the development branch
for months, but we didn't notice.
In nightly pipelines, build the current 'main' (actually 'v1.x') branch
of libuv and run the unit and system tests against it.
Merge branch 'stepan/prelease-testing-for-libuv' into 'main'
Štěpán Balážik [Mon, 9 Mar 2026 16:26:13 +0000 (17:26 +0100)]
Test development version of libuv in CI
Recently, a broken version of libuv was released breaking BIND on
several platforms. The offending commit [1] was on the development
branch for months, but we didn't notice.
In nightly pipelines, build the current 'main' (actually 'v1.x') branch
of libuv and run the unit and system tests against it.
Mark Andrews [Fri, 10 Apr 2026 06:23:27 +0000 (16:23 +1000)]
fix: usr: Fix zone verification of NSEC3 signed zones
Previously, when computing the compressed bitmap during verification of an NSEC3-signed zone, an undersized buffer was used that resulted in an out-of-bounds write if there were too many active windows in the bitmap. This impacted mirror zones which are NSEC3-signed, `dnssec-signzone` and `dnssec-verifyzone`. This has been fixed.
Michał Kępień [Thu, 9 Apr 2026 11:25:14 +0000 (13:25 +0200)]
fix: ci: Purge distros token in a separate CI job
The "publish" job runs on a dedicated, locked-down runner that lacks the
Python modules necessary to execute the manage_distros_token.py script.
Instead of deleting the token within the "publish" job, purge it in a
separate job that automatically runs on the "base" image after the
"publish" job succeeds. Define "rules" for the new job so that the
token is only deleted for security releases, as it should have been
initially.
Merge branch 'michal/purge-distros-token-in-a-separate-ci-job' into 'main'
Michał Kępień [Thu, 9 Apr 2026 11:23:57 +0000 (13:23 +0200)]
Purge distros token in a separate CI job
The "publish" job runs on a dedicated, locked-down runner that lacks the
Python modules necessary to execute the manage_distros_token.py script.
Instead of deleting the token within the "publish" job, purge it in a
separate job that automatically runs on the "base" image after the
"publish" job succeeds. Define "rules" for the new job so that the
token is only deleted for security releases, as it should have been
initially.
Michał Kępień [Thu, 9 Apr 2026 04:02:34 +0000 (06:02 +0200)]
Handle CVE reproducers along with fixes
With AI agents widely available, delaying CVE reproducer publication no
longer provides any benefit, as feeding a patch with a fix to a large
language model can produce a usable exploit. Revise the CVE checklist
to ensure the reproducer and the fix are pushed to the same merge
request (as separate commits) and remove the post-disclosure step for
regression test publishing.
Mark Andrews [Thu, 9 Apr 2026 00:33:41 +0000 (10:33 +1000)]
fix: doc: nsupdate does not handle zero length RDATA well
Nsupdate does not distinguish between a non-existing RDATA field
and an empty RDATA field when determining which action is desired
when the RDATA field is empty. This only affects a few data types,
like APL, which allow an empty RDATA field. Document a workaround
of using the '\# 0' form for entering these specific records. e.g.
# delete the APL RRset
update delete IN APL
# delete the APL record with a zero length rdata
update delete IN APL \# 0
Closes #5835
Merge branch '5835-nsupdate-doc-zero-length-rdata-how-to' into 'main'
Mark Andrews [Tue, 31 Mar 2026 01:26:42 +0000 (12:26 +1100)]
nsupdate does not handle zero length RDATA well
Nsupdate does not distinguish between a non-existing RDATA field
and an empty RDATA field when determining which action is desired
when the RDATA field is empty. This only affects a few data types,
like APL, which allow an empty RDATA field. Document a workaround
of using the '\# 0' form for entering these specific records. e.g.
# delete the APL RRset
update delete IN APL
# delete the APL record with a zero length rdata
update delete IN APL \# 0
chg: usr: Reduce memory footprint by actively returning unused memory to the OS
Previously, :iscman:`named` relied on the default allocator settings for
releasing unused memory back to the operating system, which could result in
unnecessarily high resident memory usage. :iscman:`named` now actively
manages memory page purging. On systems using jemalloc, background cleanup
threads are enabled and the dirty page decay time is reduced from 10 seconds
to 5 seconds. Additionally, a volume-based decay pass is triggered after
every 16 MiB of freed memory. On glibc-based systems, a similar
volume-based mechanism using malloc_trim() is used instead.
Merge branch 'ondrej/enable-background-cleaning-of-unused-memory' into 'main'
Ondřej Surý [Mon, 30 Mar 2026 06:50:07 +0000 (08:50 +0200)]
Reduce memory footprint by enabling background page purging
Enable jemalloc background threads and reduce dirty page decay time from
10s to 1s so that unused memory is returned to the OS sooner. As an
additional safety net, trigger a decay pass after every 16 MiB of frees
(rate-limited to once per second) to handle bursts that the background
thread might not catch in time. On glibc, fall back to malloc_trim(0)
with the same volume-based trigger.
Matthijs Mekking [Thu, 19 Mar 2026 16:58:30 +0000 (17:58 +0100)]
Move three more functions to zoneproperties.c
Move the following functions to the zoneproperties source files, as
they are simple get functions:
- dns_zone_getgluecachestats
- dns_zone_getkeystores
- dns_zone_getrequesttransporttype
projects / thirdparty / bind9.git / log
