Jiri Denemark [Tue, 28 Jun 2016 12:39:58 +0000 (14:39 +0200)]
qemu: Let empty default VNC password work as documented
CVE-2016-5008
Setting an empty graphics password is documented as a way to disable
VNC/SPICE access, but QEMU does not always behaves like that. VNC would
happily accept the empty password. Let's enforce the behavior by setting
password expiration to "now".
Eric Blake [Thu, 6 Nov 2014 09:34:00 +0000 (10:34 +0100)]
CVE-2014-7823: dumpxml: security hole with migratable flag
Commit 28f8dfd (v1.0.0) introduced a security hole: in at least
the qemu implementation of virDomainGetXMLDesc, the use of the
flag VIR_DOMAIN_XML_MIGRATABLE (which is usable from a read-only
connection) triggers the implicit use of VIR_DOMAIN_XML_SECURE
prior to calling qemuDomainFormatXML. However, the use of
VIR_DOMAIN_XML_SECURE is supposed to be restricted to read-write
clients only. This patch treats the migratable flag as requiring
the same permissions, rather than analyzing what might break if
migratable xml no longer includes secret information.
Fortunately, the information leak is low-risk: all that is gated
by the VIR_DOMAIN_XML_SECURE flag is the VNC connection password;
but VNC passwords are already weak (FIPS forbids their use, and
on a non-FIPS machine, anyone stupid enough to trust a max-8-byte
password sent in plaintext over the network deserves what they
get). SPICE offers better security than VNC, and all other
secrets are properly protected by use of virSecret associations
rather than direct output in domain XML.
* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_GET_XML_DESC):
Tighten rules on use of migratable flag.
* src/libvirt-domain.c (virDomainGetXMLDesc): Likewise.
Pavel Hrdina [Mon, 22 Sep 2014 16:19:07 +0000 (18:19 +0200)]
domain_conf: fix domain deadlock
If you use public api virConnectListAllDomains() with second parameter
set to NULL to get only the number of domains you will lock out all
other operations with domains.
Peter Krempa [Thu, 11 Sep 2014 14:35:53 +0000 (16:35 +0200)]
CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk
Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.
Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition. So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.
LSN-2014-0003: Don't expand entities when parsing XML
If the XML_PARSE_NOENT flag is passed to libxml2, then any
entities in the input document will be fully expanded. This
allows the user to read arbitrary files on the host machine
by creating an entity pointing to a local file. Removing
the XML_PARSE_NOENT flag means that any entities are left
unchanged by the parser, or expanded to "" by the XPath
APIs.
Peter Krempa [Tue, 1 Jul 2014 11:52:51 +0000 (13:52 +0200)]
qemu: copy: Accept 'format' parameter when copying to a non-existing img
We have the following matrix of possible arguments handled by the logic
statement touched by this patch:
| flags & _REUSE_EXT | !(flags & _REUSE_EXT)
-------+--------------------+----------------------
format| (1) | (2)
-------+--------------------+----------------------
!format| (3) | (4)
-------+--------------------+----------------------
In cases 1 and 2 the user provided a format, in cases 3 and 4 not. The
user requests to use a pre-existing image in 1 and 3 and libvirt will
create a new image in 2 and 4.
The difference between cases 3 and 4 is that for 3 the format is probed
from the user-provided image, whereas in 4 we just use the existing disk
format.
The current code would treat cases 1,3 and 4 correctly but in case 2 the
format provided by the user would be ignored.
The particular piece of code was broken in commit 35c7701c64508f975dfeb8
but since it was introduced a few commits before that it was never
released as working.
Eric Blake [Mon, 6 Jan 2014 21:33:08 +0000 (14:33 -0700)]
build: fix 'make check' with newer git
Newer git doesn't like the maint.mk rule 'public-submodule-commit'
run during 'make check', as inherited from our checkout of gnulib.
I tracked down that libvirt commit 8531301 picked up a gnulib fix
that makes git happy. Rather than try and do a full .gnulib
submodule update to gnulib.git d18d1b802 (as used in that libvirt
commit), it was easier to just backport the fixed maint.mk from
gnulib on top of our existing submodule level. I did it as follows,
where these steps will have to be repeated when cherry-picking this
commit to any other maintenance branch:
mkdir -p gnulib/local/top
cd .gnulib
git checkout d18d1b802 top/maint.mk
git diff HEAD > ../gnulib/local/top/maint.mk.diff
git reset --hard
cd ..
git add gnulib/local/top
Eric Blake [Wed, 25 Jun 2014 20:54:36 +0000 (14:54 -0600)]
docs: publish correct enum values
We publish libvirt-api.xml for others to use, and in fact, the
libvirt-python bindings use it to generate python constants that
correspond to our enum values. However, we had an off-by-one bug
that any enum that relied on C's rules for implicit initialization
of the first enum member to 0 got listed in the xml as having a
value of 1 (and all later members of the enum were equally
botched).
The fix is simple - since we add one to the previous value when
encountering an enum without an initializer, the previous value
must start at -1 so that the first enum member is assigned 0.
The python generator code has had the off-by-one ever since DV
first wrote it years ago, but most of our public enums were immune
because they had an explicit = 0 initializer. The only affected
enums are:
- virDomainEventGraphicsAddressType (such as
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4), since commit 987e31e
(libvirt v0.8.0)
- virDomainCoreDumpFormat (such as VIR_DOMAIN_CORE_DUMP_FORMAT_RAW),
since commit 9fbaff0 (libvirt v1.2.3)
- virIPAddrType (such as VIR_IP_ADDR_TYPE_IPV4), since commit 03e0e79 (not yet released)
Thanks to Nehal J Wani for reporting the problem on IRC, and
for helping me zero in on the culprit function.
Peter Krempa [Wed, 25 Jun 2014 16:11:17 +0000 (18:11 +0200)]
qemu: blockcopy: Don't remove existing disk mirror info
When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.
Laine Stump [Thu, 1 May 2014 08:40:41 +0000 (11:40 +0300)]
qemu: fix crash when removing <filterref> from interface with update-device
If a domain network interface that contains a <filterref> is modified
"live" using "virsh update-device --live", libvirtd would crash. This
was because the code supporting live update of an interface's
filterref was assuming that a filterref might be added or modified,
but didn't account for removing the filterref, resulting in a null
dereference of the filter name.
Introduced with commit 258fb278, which was first in libvirt v1.0.1.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1093301
qemu: make sure agent returns error when required data are missing
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
Michal Privoznik [Wed, 19 Mar 2014 17:10:34 +0000 (18:10 +0100)]
virNetClientSetTLSSession: Restore original signal mask
Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:
SIG_BLOCK
The set of blocked signals is the union of the current set and the set argument.
Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:
SIG_SETMASK
The set of blocked signals is set to the argument set.
The nwfilter conf update mutex previously serialized
updates to the internal data structures for firewall
rules, and updates to the firewall itself. The latter
was recently turned into a read/write lock, and filter
instantiation allowed to proceed in parallel. It was
believed that this was ok, since each filter is created
on a separate iptables/ebtables chain.
It turns out that there is a subtle lock ordering problem
on virNWFilterObjPtr instances. __virNWFilterInstantiateFilter
will hold a lock on the virNWFilterObjPtr it is instantiating.
This in turn invokes virNWFilterInstantiate which then invokes
virNWFilterDetermineMissingVarsRec which then invokes
virNWFilterObjFindByName. This iterates over every single
virNWFilterObjPtr in the list, locking them and checking their
name. So if 2 or more threads try to instantiate a filter in
parallel, they'll all hold 1 lock at the top level in the
__virNWFilterInstantiateFilter method which will cause the
other thread to deadlock in virNWFilterObjFindByName.
The fix is to add an exclusive mutex to serialize the
execution of __virNWFilterInstantiateFilter.
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Conflicts:
src/conf/nwfilter_conf.c
- virReportOOMError() in context of one hunk.
src/lxc/lxc_driver.c
- trivial date conflict in copyright line
- functions renamed, and lxc object locking changed, creating
a conflict in the context.
src/qemu/qemu_driver.c
- qemuDomainStartWithFlags (called qemuDomainCreateWithFlags
upstream) gets the domain object using
qemuDomObjFromDomain() upstream, but
virDomainObjListFindByUUID() in 1.0.4. This creates a
small conflict in context.
Remove use of virConnectPtr from all remaining nwfilter code
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Conflicts:
src/nwfilter/nwfilter_driver.c
- *EnsureACL*() was added after this branch was created, and
caused two small conflicts in the context around a hunk.
- nwfilterDriverReload() was renamed to nwfilterStateReload()
upstream.
Don't pass virConnectPtr in nwfilter 'struct domUpdateCBStruct'
The nwfilter driver only needs a reference to its private
state object, not a full virConnectPtr. Update the domUpdateCBStruct
struct to have a 'void *opaque' field instead of a virConnectPtr.
For inexplicable reasons, the nwfilter XML parser is intentionally
ignoring errors that arise during parsing. As well as meaning that
users don't get any feedback on their XML mistakes, this will lead
it to silently drop data in OOM conditions.
When writing commit 173c291, I missed the fact virNetServerClientClose
unlocks the client object before actually clearing client->sock and thus
it is possible to hit a window when client->keepalive is NULL while
client->sock is not NULL. I was thinking client->sock == NULL was a
better check for a closed connection but apparently we have to go with
client->keepalive == NULL to actually fix the crash.
When a client closes its connection to libvirtd early during
virConnectOpen, more specifically just after making
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call to check if
VIR_DRV_FEATURE_PROGRAM_KEEPALIVE is supported without even waiting for
the result, libvirtd may crash due to a race in keep-alive
initialization. Once receiving the REMOTE_PROC_CONNECT_SUPPORTS_FEATURE
call, the daemon's event loop delegates it to a worker thread. In case
the event loop detects EOF on the connection and calls
virNetServerClientClose before the worker thread starts to handle
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call, client->keepalive will be
disposed by the time virNetServerClientStartKeepAlive gets called from
remoteDispatchConnectSupportsFeature. Because the flow is common for
both authenticated and read-only connections, even unprivileged clients
may cause the daemon to crash.
To avoid the crash, virNetServerClientStartKeepAlive needs to check if
the connection is still open before starting keep-alive protocol.
Every libvirt release since 0.9.8 is affected by this bug.
Jiri Denemark [Fri, 20 Dec 2013 13:50:02 +0000 (14:50 +0100)]
qemu: Avoid using stale data in virDomainGetBlockInfo
CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
Eric Blake [Tue, 17 Dec 2013 23:28:20 +0000 (16:28 -0700)]
tests: be more explicit on qcow2 versions in virstoragetest
While working on v1.0.5-maint (the branch in use on Fedora 19)
with the host at Fedora 20, I got a failure in virstoragetest.
I traced it to the fact that we were using qemu-img to create a
qcow2 file, but qemu-img changed from creating v2 files by
default in F19 to creating v3 files in F20. Rather than leaving
it up to qemu-img, it is better to write the test to force
testing of BOTH file formats (better code coverage and all).
This patch alone does not fix all the failures in v1.0.5-maint;
for that, we must decide to either teach the older branch to
understand v3 files, or to reject them outright as unsupported.
But for upstream, making the test less dependent on changing
qemu-img defaults is always a good thing.
* tests/virstoragetest.c (testPrepImages): Simplify creation of
raw file; check if qemu supports compat and if so use it.
Jim Fehlig [Thu, 16 May 2013 14:42:21 +0000 (08:42 -0600)]
libxl: fix build with Xen4.3
Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const. Detect this and
define the libvirt libxl event handler signature appropriately.
(cherry picked from commit 43b0ff5b1eb7fbcdc348b2a53088a7db939d5e48)
Zhou Yimin [Thu, 17 Oct 2013 07:59:21 +0000 (15:59 +0800)]
remote: fix regression in event deregistration
Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com> Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 9712c2510ec87a87578576a407768380e250a6a4)
Osier Yang [Fri, 24 May 2013 03:59:14 +0000 (11:59 +0800)]
virsh: Fix regression of vol-resize
Introduced by commit 1daa4ba33acf. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
(cherry picked from commit 2a3a725c33aba2046443d33eb473eb54517f61c8)
Fix crash in remoteDispatchDomainMemoryStats (CVE-2013-4296)
The 'stats' variable was not initialized to NULL, so if some
early validation of the RPC call fails, it is possible to jump
to the 'cleanup' label and VIR_FREE an uninitialized pointer.
This is a security flaw, since the API can be called from a
readonly connection which can trigger the validation checks.
Eric Blake [Mon, 15 Apr 2013 14:54:53 +0000 (08:54 -0600)]
maint: update to latest gnulib
Upstream gnulib determined that we were needlessly compiling in
gnulib's regex instead of glibc's when targetting new-enough glibc,
because the m4 test was being too strict in requiring a particular
answer to undefined behavior.
https://lists.gnu.org/archive/html/bug-gnulib/2013-04/msg00032.html
Eric Blake [Mon, 1 Apr 2013 18:49:05 +0000 (12:49 -0600)]
maint: update to latest gnulib
While this update doesn't address any reported problems in libvirt,
doing a post-release update to latest gnulib makes it easier to
stay in sync with best upstream practices.
* .gnulib: Update to latest.
* bootstrap: Resynchronize.
The src/lxc/lxc_*_dispatch.h files only had deps on the
RPC generator script & the XDR definition file. So when
the Makefile.am args passed to the generator were change,
the disaptch code was not re-generated. This caused a
build failure
CC libvirt_lxc-lxc_controller.o
lxc/lxc_controller.c: In function 'virLXCControllerSetupServer':
lxc/lxc_controller.c:718:47: error: 'virLXCMonitorProcs' undeclared (first use in this function)
lxc/lxc_controller.c:718:47: note: each undeclared identifier is reported only once for each function it appears in
lxc/lxc_controller.c:719:47: error: 'virLXCMonitorNProcs' undeclared (first use in this function)
make[3]: *** [libvirt_lxc-lxc_controller.o] Error 1
For added fun, the generated files were not listed in
CLEANFILES, so only a 'git clean -f' would fix the build
Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.
To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
Signed-off-by: Colin Walters <walters@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 922b7fda77b094dbf022d625238262ea05335666)
Conflicts:
src/access/viraccessdriverpolkit.c
Resolution:
Dropped file that does not exist in this branch.
Include process start time when doing polkit checks
Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Ján Tomko [Wed, 26 Jun 2013 11:07:24 +0000 (13:07 +0200)]
Fix invalid read in virCgroupGetValueStr
Don't check for '\n' at the end of file if zero bytes were read.
Found by valgrind:
==404== Invalid read of size 1
==404== at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404== by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404== by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404== by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404== by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404== by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)
Ján Tomko [Tue, 25 Jun 2013 13:10:27 +0000 (15:10 +0200)]
virsh: edit: don't leak XML string on reedit or redefine
Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.
Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a252974c8e5c650f1d84dc2b167f0ae8cee3c)
The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".
(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647bcde23cff5da48f725561ff5ba3fba39)
Ján Tomko [Fri, 12 Apr 2013 15:30:56 +0000 (17:30 +0200)]
daemon: fix leak after listing all volumes
CVE-2013-1962
remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
(cherry picked from commit ca697e90d5bd6a6dfb94bfb6d4438bdf9a44b739)
Ján Tomko [Fri, 22 Mar 2013 11:32:32 +0000 (12:32 +0100)]
virsh: don't print --(null) in vol-name and vol-pool
Don't print the pool option name if it's null.
Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol
After:
virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol
Ján Tomko [Fri, 29 Mar 2013 11:55:38 +0000 (12:55 +0100)]
virsh: don't call virSecretFree on NULL
Since the refactoring in fbe2d49 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree
When creating a logical volume with virStorageVolCreateXMLFrom,
"qemu-img convert" is called internally if clonevol is a file volume.
Then, vol->target.format is used as output_fmt parameter but the
target.format of logical volumes is always 0 because logical volumes
haven't the volume format type element.
Fortunately, 0 was treated as RAW file format before commit f772b3d9,
so there was no problem. But now, 0 is treated as the type of none,
qemu-img fails with "Unknown file format 'none'".
This patch fixes this issue by treating output block devices as RAW
file format like for input block devices.
Doug Goldstein [Sun, 17 Mar 2013 01:57:55 +0000 (20:57 -0500)]
Fix --without-libvirtd builds
When building with --without-libvirtd and udev support is detected we
will fail to build with the following error:
node_device/node_device_udev.c:1608:37: error: unknown type name
'virStateInhibitCallback'
(cherry picked from commit 52ad612c1e5f469a7a2863fd149ecc434d76ac6e)
Laine Stump [Wed, 13 Mar 2013 19:26:35 +0000 (15:26 -0400)]
util: fix clear_emulator_capabilities=0
My commit 7a2e845a865dc7fa82d2393ea2a770cfc8cf00b4 (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.
Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
(cherry picked from commit 2639c6320647778c1496008058dde57dfca35b92)
In some startup failure modes, the fuse thread may get itself
wedged. This will cause the entire libvirt_lxc process to
hang trying to the join the thread. There is no compelling
reason to wait for the thread to exit if the whole process
is exiting, so just daemonize the fuse thread instead.
Ján Tomko [Mon, 11 Mar 2013 12:22:21 +0000 (13:22 +0100)]
virsh: fix snapshot-create with no xmlfile
Properly check the return value of vshCommandOptStringReq for xmlfile:
* error out on incorrect input (--xmlfile '')
* use default XML <domainsnapshot/> with no --xmlfile specified
Guido Günther [Sat, 9 Mar 2013 13:51:25 +0000 (14:51 +0100)]
lxc: Init activeUsbHostdevs
otherwise we crash with
#0 virUSBDeviceListFind (list=0x0, dev=dev@entry=0x8193d70) at util/virusb.c:526
#1 0xb1a4995b in virLXCPrepareHostdevUSBDevices (driver=driver@entry=0x815d9a0, name=0x815dbf8 "debian-700267", list=list@entry=0x81d8f08) at lxc/lxc_hostdev.c:88
#2 0xb1a49fce in virLXCPrepareHostUSBDevices (def=0x8193af8, driver=0x815d9a0) at lxc/lxc_hostdev.c:261
#3 virLXCPrepareHostDevices (driver=driver@entry=0x815d9a0, def=0x8193af8) at lxc/lxc_hostdev.c:328
#4 0xb1a4c5b1 in virLXCProcessStart (conn=0x817d3f8, driver=driver@entry=0x815d9a0, vm=vm@entry=0x8190908, autoDestroy=autoDestroy@entry=false, reason=reason@entry=VIR_DOMAIN_RUNNING_BOOTED)
at lxc/lxc_process.c:1068
#5 0xb1a57e00 in lxcDomainStartWithFlags (dom=dom@entry=0x815e460, flags=flags@entry=0) at lxc/lxc_driver.c:1014
#6 0xb1a57fc3 in lxcDomainStart (dom=0x815e460) at lxc/lxc_driver.c:1046
#7 0xb79c8375 in virDomainCreate (domain=domain@entry=0x815e460) at libvirt.c:8450
#8 0x08078959 in remoteDispatchDomainCreate (args=0x81920a0, rerr=0xb65c21d0, client=0xb0d00490, server=<optimized out>, msg=<optimized out>) at remote_dispatch.h:1066
#9 remoteDispatchDomainCreateHelper (server=0x80c4928, client=0xb0d00490, msg=0xb0d005b0, rerr=0xb65c21d0, args=0x81920a0, ret=0x815d208) at remote_dispatch.h:1044
#10 0xb7a36901 in virNetServerProgramDispatchCall (msg=0xb0d005b0, client=0xb0d00490, server=0x80c4928, prog=0x80c6438) at rpc/virnetserverprogram.c:432
#11 virNetServerProgramDispatch (prog=0x80c6438, server=server@entry=0x80c4928, client=0xb0d00490, msg=0xb0d005b0) at rpc/virnetserverprogram.c:305
#12 0xb7a300a7 in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>, client=<optimized out>, srv=0x80c4928) at rpc/virnetserver.c:162
#13 virNetServerHandleJob (jobOpaque=0xb0d00510, opaque=0x80c4928) at rpc/virnetserver.c:183
#14 0xb7924f98 in virThreadPoolWorker (opaque=opaque@entry=0x80a94b0) at util/virthreadpool.c:144
#15 0xb7924515 in virThreadHelper (data=0x80a9440) at util/virthreadpthread.c:161
#16 0xb7887c39 in start_thread (arg=0xb65c2b70) at pthread_create.c:304
#17 0xb77eb78e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130
when adding a domain with a usb device. This is Debian bug
Guido Günther [Fri, 8 Mar 2013 16:28:37 +0000 (17:28 +0100)]
lxc: include sys/stat.h
This fixes the build on Debian Wheezy which otherwise fails with:
CC libvirt_driver_lxc_impl_la-lxc_process.lo
lxc/lxc_process.c: In function 'virLXCProcessGetNsInode':
lxc/lxc_process.c:648:5: error: implicit declaration of function 'stat' [-Werror=implicit-function-declaration]
lxc/lxc_process.c:648:5: error: nested extern declaration of 'stat' [-Werror=nested-externs]
cc1: all warnings being treated as errors
(cherry picked from commit c8871d8fbda27f823e8799a4136670e656345399)
Guannan Ren [Tue, 5 Mar 2013 15:13:21 +0000 (23:13 +0800)]
util: fix a integer boundary error
A value which is equal to a integer maximum such as LLONG_MAX is
a valid integer value.
The patch fix the following error:
1, virsh memtune vm --swap-hard-limit -1
2, virsh start vm
In debug mode, it shows error like:
virScaleInteger:1813 : numerical overflow:\
value too large: 9007199254740991KiB
(cherry picked from commit b38a040a2996ea5e0ff4ef41e69114e3681592ba)
Eric Blake [Mon, 4 Mar 2013 22:42:07 +0000 (15:42 -0700)]
rng: restrict passthrough names to known-good files
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng. It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.
John Ferlan [Tue, 26 Feb 2013 14:11:10 +0000 (09:11 -0500)]
hellolibvirt: Adjust code to use new APIs
Change the order of some conditions and use the AllDomains API to get
a list of all the active and defined domains, then use the Active and
Name API's in order to print.
This changes here adjust the output from:
Attempting to connect to hypervisor
Connected to hypervisor at "qemu:///system"
Hypervisor: "QEMU" version: 0.32.656
There are 0 active and 2 inactive domains
Inactive domains:
foo
bar
Disconnected from hypervisor
to
Attempting to connect to hypervisor
Connected to hypervisor at "qemu:///system"
Hypervisor: "QEMU" version: 0.32.656
There are 0 active and 2 inactive domains
foo (non-active)
bar (non-active)
Disconnected from hypervisor
When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Satoru Moriya [Mon, 4 Mar 2013 17:27:45 +0000 (17:27 +0000)]
qemu: fix wrong evaluation in qemuDomainSetMemoryParameters
19c6ad9a (qemu: Refactor qemuDomainSetMemoryParameters) introduced
a new macro, VIR_GET_LIMIT_PARAMETER(PARAM, VALUE). But if statement
in the macro is not correct and so set_XXXX flags are set to false
in the wrong. As a result, libvirt ignores all memtune parameters.
This patch fixes the conditional expression to work correctly.
Guannan Ren [Mon, 4 Mar 2013 12:38:18 +0000 (20:38 +0800)]
util: use string libvirt to prefix error message instead of libvir
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=912021
Without error handler set, virDefaultErrorFunc will be called, the
error message is prefixed with "libvir:". It become a little better
by using prefix "libvirt:" when working with upper application.
For example:
1, stop libvirtd daemon
2, run virt-top.
libvir: XML-RPC error : Failed to connect \
socket to '/var/run/libvirt/libvirt-sock-ro': \
No such file or directory
libvirt: VIR_ERR_SYSTEM_ERROR: VIR_FROM_RPC: \
Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': \
No such file or directory
I just stumbled over that very issue on F18. Doing a little bit
debugging of the shutdown sequence, it turns out that - at least on my
F18 installation - libvirtd is shutdown *after* iscsid, which makes it
impossible for libvirt to perform the logout of the iscsi session properly.
This patch simply adds another startup dependancy on iscsid.service
which in turn delays iscsid shutdown until after libvirtd has stopped.
Having that applied, the system shuts down properly again.
Commit f506a4c1 changed virSetUIDGID() to be a noop
when uid/gid are -1, while it used to be a noop when
they are <= 0.
The changes in this commit broke creating new VMs in GNOME Boxes
as qemuDomainCheckDiskPresence gets called during domain creation/startup,
which in turn calls virFileAccessibleAs which fails after calling
virSetUIDGID(0, 0) (Boxes uses session libvirtd). virSetUIDGID is called with
(0, 0) as these are the default user/group values in virQEMUDriverConfig
for session libvirtd.
This commit changes virQEMUDriverConfigNew to use -1 as the unpriviledged
uid/gid. I've also looked at the various places where cfg->user is used,
and they all seem to handle -1 correctly.
Michal Privoznik [Thu, 28 Feb 2013 14:59:01 +0000 (15:59 +0100)]
virnetdevmacvlan.c: Introduce mutex for macvlan creation
Currently, after we removed the qemu driver lock, it may happen
that two or more threads will start up a machine with macvlan and
race over virNetDevMacVLanCreateWithVPortProfile(). However,
there's a racy section in which we are generating a sequence of
possible device names and detecting if they exits. If we found
one which doesn't we try to create a device with that name.
However, the other thread is doing just the same. Assume it will
succeed and we must therefore fail. If this happens more than 5
times (which in massive parallel startup surely will) we return
-1 without any error reported. This patch is a simple hack to
both of these problems. It introduces a mutex, so only one thread
will enter the section, and if it runs out of possibilities,
error is reported. Moreover, the number of retries is raised to 20.
There is a lock ordering problem in the QEMU close callback
APIs.
When starting a guest we have a lock on the VM. We then
set a autodestroy callback, which acquires a lock on the
close callbacks.
When running auto-destroy, we obtain a lock on the close
callbacks, then run each callbacks - which obtains a lock
on the VM.
This causes deadlock if anyone tries to start a VM, while
autodestroy is taking place.
The fix is to do autodestroy in 2 phases. First obtain
all the callbacks and remove them from the list under
the close callback lock. Then invoke each callback
from outside the close callback lock.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fix crash in QEMU auto-destroy with transient guests
When the auto-destroy callback runs it is supposed to return
NULL if the virDomainObjPtr is no longer valid. It was not
doing this for transient guests, so we tried to virObjectUnlock
a mutex which had been freed. This often led to a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Jiri Denemark [Thu, 28 Feb 2013 11:48:01 +0000 (12:48 +0100)]
qemu: Make sure qemuProcessStart is run within a job
qemuProcessStart expects to be run with a job already set and every
caller except for qemuMigrationPrepareAny use it correctly. This bug can
be observed in libvirtd logs during incoming migration as
warning : qemuDomainObjEnterMonitorInternal:979 : This thread seems
to be the async job owner; entering monitor without asking for a
nested job is dangerous
Jim Fehlig [Wed, 27 Feb 2013 23:32:35 +0000 (16:32 -0700)]
Fix starting qemu instances when apparmor driver is enabled
With the apparmor security driver enabled, qemu instances fail
to start
# grep ^security_driver /etc/libvirt/qemu.conf
security_driver = "apparmor"
# virsh start test-kvm
error: Failed to start domain test-kvm
error: internal error security label already defined for VM
The model field of virSecurityLabelDef object is always populated
by virDomainDefGetSecurityLabelDef(), so remove the check for a
NULL model when verifying if a label is already defined for the
instance.
Checking for a NULL model and populating it later in
AppArmorGenSecurityLabel() has been left in the code to be
consistent with virSecuritySELinuxGenSecurityLabel().
Michal Privoznik [Mon, 25 Feb 2013 17:52:12 +0000 (18:52 +0100)]
qemu: Don't fail to shutdown domains with unresponsive agent
Currently, qemuDomainShutdownFlags() chooses the agent method of
shutdown whenever the agent is configured. However, this
assumption is not enough as the guest agent may be unresponsive
at the moment. So unless guest agent method has been explicitly
requested, we should fall back to the ACPI method.
The unitialized local variable qemuVersion can cause an random value
to be returned for the hypervisor version, observable with virsh version.
Introduced by commit b46f7f4a0b96c2d2d01d64d960bd7bc90dc16b0c
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The QEMU driver has a list of devices nodes that are whitelisted
for all guests. The kernel has recently started returning an
error if you try to whitelist a device which does not exist.
This causes a warning in libvirt logs and an audit error for
any missing devices. eg
The code for putting the emulator threads in a separate cgroup
would spam the logs with warnings
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 3
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 4
2013-02-27 16:08:26.732+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 6
This is because it has only created child cgroups for 3 of the
controllers, but was trying to move the processes from all the
controllers. The fix is to only try to move threads in the
controllers we actually created. Also remove the warning and
make it return a hard error to avoid such lazy callers in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCloseCallbacksRunOne method was passing a uuid string
to virDomainObjListFindByUUID, when it actually expected to get
a raw uuid buffer. This was not caught by the compiler because
the method was using a 'void *uuid' instead of first casting
it to the expected type.
This regression was accidentally caused by refactoring in
Eric Blake [Wed, 27 Feb 2013 00:43:12 +0000 (17:43 -0700)]
qemu: -numa doesn't (yet) support disjoint range
https://bugzilla.redhat.com/show_bug.cgi?id=896092 mentions that
qemu 1.4 and earlier only accept a simple start-stop range for
the cpu=... argument of -numa. Libvirt would attempt to use
-numa cpu=1,3 for a disjoint range, which did not work as intended.
Upstream qemu will be adding a new syntax for disjoint cpu ranges
in 1.5; but the design for that syntax is still under discussion
at the time of this patch. So for libvirt 1.0.3, it is safest to
just reject attempts to build an invalid qemu command line; in the
future, we can add a capability bit and translate to the final
accepted design for selecting a disjoint cpu range in numa.
projects / thirdparty / libvirt.git / log
