Daniel Golle [Mon, 29 Aug 2022 06:54:41 +0000 (08:54 +0200)]
kernel: pick patches for MediaTek Ethernet from linux-next
Pick patches with several fixes and improvements, preparation for
upcoming WED (TX) [1] as well as basic XDP support [2] with MediaTek's
Filogic SoCs to the mtk_eth_soc driver.
Also pick follow-up patch fixing Ethernet on MT7621 [3].
[1]: https://patchwork.kernel.org/project/netdevbpf/list/?series=662108&state=*
[2]: https://patchwork.kernel.org/project/netdevbpf/list/?series=675368&state=*
(the first part of the series adding wed nodes to mt7986a.dtsi was
applied to the copy of mt7986a.dtsi in our tree)
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=5e69163d3b9931098922b3fc2f8e786af8c1f37e
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Michael Pratt [Mon, 19 Sep 2022 20:39:34 +0000 (16:39 -0400)]
scripts/dl_cleanup: add support for subdirectories
Allow comparing subdirectories exactly like files.
Handle a corner case where the new subdirectory
has the same tarball inside of it
as the one that was downloaded
before a subdirectory for that package was established.
Michael Pratt [Wed, 3 Aug 2022 17:01:51 +0000 (13:01 -0400)]
rules.mk: add option to download files into a subdirectory
Some packages download a single raw file or set of raw files
instead of an archive.
The filenames of these download files have names and version numbers
that do not directly correspond to the name and version of the package
as it is defined in its Makefile.
To better organize downloaded files, this adds the option of
creating a subdirectory in the download directory for these files
that can be named with package specific variables.
DL_DIR is now a recursively expanded variable
since the value now depends on whether DL_SUBDIR is defined.
The currently used shell expansion doesn't seem to exist [0] and also
does not work. This surely was not intended, so lets allow default
naming to actually work.
Felix Fietkau [Thu, 22 Sep 2022 13:23:54 +0000 (15:23 +0200)]
iwinfo: update to the latest version
46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx>
This was done by running this:
./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new
mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15
Nicola Corna [Fri, 19 Aug 2022 19:34:01 +0000 (19:34 +0000)]
x86/64: enable IOMMU support
Enable IOMMU support for Intel and AMD x86 platforms. With this, when the
vfio module is present, physical PCI devices can be passed to VMs, for
example with `qemu-system-x86_64 -device vfio-pci,host=05:00.0 ...`.
IOMMU support increases the kernel size by a small amount (~370KB, from 5239840 B to 5611200 B, a ~7% increase in size).
All contents of staging_dir/image are included in Image Builder (IB) in
case some binary needs to be included in final image. But in case of
this package, all sources are stored there and those clutter the final
tarball of IB for no reason. Those sources are not used during image
creation and are just dead weight. To put it in perspective, the IB for
21.02.0 is 158 MiB, 22.03.0-rc6 is 366 MiB and snapshot is over 620 MiB!
To fix it, put them in package build directory, so they won't end up
included in IB tarball.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com>
When the v1 and v2 variants of the U6LR were introduced, the board
network config was not adapted to the new device names. Due to this, the
wrong network config is applied during initial boot. The resulting
config has lan, wan and a switch, while this device only has a single
ethernet interface without a switch.
Fix this by using a wildcard that matches all the variants.
Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org>
Petr Štetiar [Mon, 22 Aug 2022 13:05:01 +0000 (15:05 +0200)]
ci: show build failures directly in job log output
Instead of waiting for complete workflow finish, then downloading the
artifacts, unpacking them and inspecting them, lets try to make the
build failure immediately visible in the log output:
====== Make errors from logs/target/linux/compile.txt ======
* Legacy (non-UHI/non-FIT) Boards
*
Support MIPS SEAD-3 boards (LEGACY_BOARD_SEAD3) [N/y/?] (NEW)
Error in reading or end of file.
David Bauer [Fri, 19 Aug 2022 00:17:22 +0000 (02:17 +0200)]
hostapd: update to 2022-07-29
b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures 89de431f2 DPP: Add config response status value to DPP-CONF-SENT 10104915a tests: sigma_dut and DPP PB session overlap 80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation 662249306 Update copyright notices for the QCA vendor definitions 8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g ddcd15c2d tests: Fix fuzzing/sae build 7fa67861a tests: Fix p2p_channel_avoid3 ee3567d65 tests: Add more time for scan/connection 1d08b238c nl80211: Allow more time for the initial scan with 6 GHz ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6 93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves 5565fbee2 DPP: Check Enrollee supported curves when building Config Response ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd 4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs c97000933 Fix ifdef condition for imsi_privacy_cert 2a9a61d6c tests: SAE with extended key AKM e35f6ed1d tests: More detailed report on SAE PMKSA caching error case f70db167a SAE: Derive a variable length PMK with the new AKM suites 91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites e81ec0962 SAE: Use H2E unconditionally with the new AKM suites f8eed2e8b SAE: Store PMK length and AKM in SAE data 9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites 91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs 5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper 5456b0f26 Define new RSN AKM suite selector values def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH 35587fa8f tests: DPP Controller/Relay with need to discover Controller d22dfe918 DPP: Event message for indicating when Relay would need a Controller ca7892e98 tests: DPP Relay and adding/removing connection to a Controller bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed 808834b18 Add a comparison function for hostapd_ip_addr f7763880b DPP: Advertise Configurator connectivity on Relay automatically ff7cc1d49 tests: DPP Relay and dynamic Controller addition ca682f80a DPP: Dynamic Controller initiated connection on Relay d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX 69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant 1ff9251a8 DPP3: Push button Configurator in wpa_supplicant b94e46bc7 tests: PB Configurator in wpa_supplicant ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received 692956446 DPP: Note PKEX code/identifier deletion in debug log dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller 17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay fb2937b85 DPP: Allow Controller to initiate PKEX through Relay 15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors 0a4f391b1 tests: sigma_dut and DPP Connector Privacy 479e412a6 DPP3: Default value for dpp_connector_privacy 7d12871ba test: DPP Private Peer Introduction protocol 148de3e0d DPP3: Private Peer Introduction protocol 786ea402b HPKE base mode with single-shot API f0273bc81 OpenSSL: Remove a forgotten debug print f2bb0839f test: DPP 3rd party config information 68209ddbe DPP: Allow 3rd party information to be added into config object 0e2217c95 DPP: Allow 3rd party information to be added into config request obj 3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration 16b62ddfa QCA vendor attribute for DBAM configuration 004b1ff47 tests: DPP Controller initiating through Relay 451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections 248654d36 tests: sigma_dut DPP PB test cases 697b7d7ec tests: DPP push button 7bbe85987 DPP3: Allow external configuration to be specified on AP for PB 8db786a43 DPP3: Testing functionality for push button announcements 37bccfcab DPP3: Push button bootstrap mechanism a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command) 159e63613 QCA vendor command for CoAP offload processing 3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics 09a281e52 Add QCA vendor interface for PASN offload to userspace 809fb96fa Add a vendor attribute to configure concurrency policy for AP interface a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY 085a3fc76 EHT: Add 320 channel width support bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h 92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch c580c2aec tests: Make OCV negative test error cases more robust 3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures 6b461f68c Set current_ssid before changing state to ASSOCIATING 8dd826741 QCA vendor attribute to configure direct data path for audio traffic 504be2f9d QCA vendor command support to get WLAN radio combinations d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz
Florian Eckert [Wed, 11 Aug 2021 09:58:45 +0000 (11:58 +0200)]
target/x86: add grub2-bios-setup to DEFAULT_PACKAGES
With the commit 5876d6a62fc0ae5799e7d9c896356f75c99a6f0a the command under
`/usr/sbin/grub-bios-setup` has been moved to its own package named
`grub-bios-setup`.
The script `81_upgrade_bootloader` under `/lib/preinit` is used by all
x86 targets to update the bootloader. The script is using the command
`grub-bios-setup` for this.
I get the following output at the first boot after the upgrade.
`/etc/preinit: line 9: /usr/sbin/grub-bios-setup: not found`.
To fix this, the DEFAULT_PACKAGES dependency is extended by the entry
`grub2-bios-setup` so that the missing command is installed again.
Alex Low [Mon, 19 Sep 2022 10:20:37 +0000 (12:20 +0200)]
build: harden GitHub workflow permissions
Grant pull-requests write permission to the labeler workflow and
read-only to everything else.
Signed-off-by: Alex Low <aleksandrosansan@gmail.com>
[ wrap to 80 columns and fix wrong author as requested by author itself ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
realtek: use upstream recommendation for secondary CPU start
Currently we fix interrupts/timers for the secondary CPU by patching
vsmp_init_secondary(). Get a little bit more generic and use the
upstream recommended way instead. Additionally avoid a check around
register_cps_smp_ops() because it does that itself.
See https://lkml.org/lkml/2022/9/12/522
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
The interrupt controller depends on two control registers. GIMR enables
or disables interrupts and IRRx routes these to MIPS CPU interrupts 2-7.
Wiki currently states "A value of '0' (in IRRx) disconnects this input from
the output line, independent of the line's setting in GIMR."
Contrary to normal intuition this statement DOES NOT mean, that interrupts
can be disabled by IRRx alone. The sad truth was discovered by enabling
SMP for an Zyxel XGS1010 on the 930x target. It shows that driver and
interrupts behave as follows:
- Timer 0 interrupt 7 has active routing to CPU0 and no routing to CPU1
- Timer 1 interrupt 8 has no routing to CPU0 and active routing to CPU1
- Unmasking (enabling) interrupts writes 1 bits to all GIMR registers
- Masking (disabling) interrupts writes 0 bits to both GIMR registers
During operation we can encounter a situation like
- GIMR bit for a interrupt/CPU combination is set to enabed (=1)
- IRRx routing bits for a interrupt/CPU combination are set to disabed (=0)
This setting already allows the hardware to fire interrupts to the target
CPU/VPE if the other CPU/VPE is currently busy. Especially for CPU bound
timer interrupts this is lethal. If timer interrupt 7 arrives at CPU1 and
vice versa for interrupt 8 the restart trigger gets lost. The timer dies
and a msleep() operation in the kernel will halt endlessly.
Fix this by tracking the IRRx active routing setting in a new bitfield with
0="routing active" and 1="no routing". Enable interrupts in GIMR only
for a interrupt & CPU if routing is active. Thus we have
- GIMR = 0 / IRRx = 0 -> everything disabled
- GIMR = 1 / IRRx > 0 -> active and normal routing
- GIMR = 0 / IRRx > 0 -> masked (disabled) with normal routing
- GIMR = 1 / IRRx = 0 -> no longer possible
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Sungbo Eo [Sun, 18 Sep 2022 01:13:56 +0000 (10:13 +0900)]
ipq40xx: disable devices with 3MiB kernel size
The image builds for Linksys EA6350 v3, EA8300, and MR8300 currently
fail on buildbots due to the KERNEL_SIZE, as stated in commit 17b7756b5a20 ("ipq40xx: 5.15: add testing kernel version"). Disable
these boards for now.
The Build prefix is used for image build commands, while the Device
prefix should be used for base recipes for devices. Apply the same
naming convention here.
While touching the file, also fix the mixed indentation.
realtek: move Netgear recipe to subtarget Makefile
There seems to be no reason to have the Netgear switches as part of
the main Makefile. Move it to its subtarget-specific Makefile since
it is only applicable there.
Currently supported HPE 1920 devices all have an RTL838x SoC, but there
are larger switches with RTL839x SoCs, although currently not supported.
Move the build recipe to common.mk so the larger devices can also make
use of the recipe, while moving it out of the main Makefile.
The D-Link DGS-1210 device series currently has supported devices with
both RTL838x and RTL839x SoCs. An image build recipe has been defined in
both subtarget makefiles, but these are mostly identical, save for the
SOC variable.
Move the SOC variable from the DGS-1210 build recipes to the applicable
devices, and put the remaining duplicate code in a shared Makefile.
* RTL8393M SoC, 1 MIPS 34Kc core @ 700MHz
* 128MB DRAM
* 32MB NOR Flash
* 48 x 10/100/1000BASE-T ports
- 6 x External PHY with 8 ports (RTL8218D)
* 4 x Gigabit RJ45/SFP Combo ports
- External PHY with 4 SFP ports (RTL8214FC)
* Power LED
* Reset button on front panel
* UART (115200 8N1) via unpopulated standard 0.1" pin header marked J14
The gpio-restart node is not required but it does reset the switch.
TODO: The 4 combo ports attached to the RTL8214FC are not detect
properly. Linux kernel reports 49 and 50 as "External RTL8393 SERDES"
and 51 and 52 as "RTL8218B (external)". Those ports only work if
u-boot initialize it (for example, loading initramfs image using one
of those ports). A patch to PHY detection is needed for full support.
The firmware recovery using U-Boot is broken for all DGS-1210 tested
devices as pressing RESET does not trigger it (only if pressed from a
running stock image)
Installation using OEM upgrade
------------------------------
1. Make sure you are running OEM firmware in image2 slot (logged as admin):
- > config firmware image_id 2 boot_up
- > reboot
2. Install squashfs-factory_image1.bin to image1 using (logged as admin):
- > download firmware_fromTFTP <tftpserver> factory_image1.bin
- > config firmware image_id 1 boot_up
- > reboot
Installation using serial interface
-----------------------------------
1. Press Escape key during `Hit Esc key to stop autoboot` prompt
2. Press CTRL+C keys to get into real U-Boot prompt
3. Init network with `rtk network on` command
4. Load image with `tftpboot 0x8f000000 openwrt-realtek-rtl839x-d-link_dgs-1210-52-initramfs-kernel.bin` command
5. Boot the image with `bootm` command
Once booted the initramfs, install the squashfs-sysupgrade.bin as a
normal OpenWrt system.
Dual-boot with stock firmware using writable u-boot-env
-------------------------------------------------------
From stock to OpenWrt / boot image 1 (CLI as admin):
- > config firmware image_id 1 boot_up
- > reboot
From OpenWrt to stock / boot image 2: (shell as root)
- # fw_setenv bootcmd 'run addargs ; bootm 0xb4e80000'
- # fw_setenv image '/dev/mtdblock7'
- # reboot
Debrick using serial interface
------------------------------
1. Press Escape key during `Hit Esc key to stop autoboot` prompt
2. In a Windows PC, run 'D-Link Network Assistant v2.0.2.4'. It should
detect the switch
3. Flash the firmware.
Back to stock firmware using dual-boot
--------------------------------------
If you have serial interface, you can change u-boot env vars
interrupting the boot process. If not but you are running OpenWrt, you
can dual-boot (as mentioned eariler) and skip to step 4:
1. Press Escape key during `Hit Esc key to stop autoboot` prompt
2. Press CTRL+C keys to get into real U-Boot prompt
3. Boot the image 2:
- set image /dev/mtdblock7; run addargs; bootm 0xb4e80000
4. Once booted, log as admin and change the boot image to 2
- > config firmware image_id 2 boot_up
- > reboot
5. After the boot, flash image1 with the vendor image
Back to stock firmware using DNA
--------------------------------
1. From an OpenWrt:
- # fw_setenv bootstop on
- # reboot
2. In a Windows PC, run 'D-Link Network Assistant v2.0.2.4'. It should
detect the switch
3. Flash the firmware.
It has been developed and tested on device with F3 revision.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
The D-Link DGS device tree was reorganized to better reflect the common
DT parts. The common include is named SOC specific (838X) and it seemed
like a good choice to add another common include in the future for the
RTL839X devices. From the current point of view this option is not really
needed.
1. The common part only includes data that matches RTL839X devices too.
2. The Panasonic DT structure avoids including the basic DTSI inside the
common DTSI.
Taking simplicity of the Panasonic include logic and in perparation to
provide DGS-1210-52 support it makes sense to harmonize this.
- rename common include to reflect its content
- move the link to the root DTSI directly to the device specific DTS
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Sungbo Eo [Sat, 17 Sep 2022 18:06:18 +0000 (03:06 +0900)]
ramips: 5.15: add disabled PINCTRL_AW9523
Otherwise kernel 5.15 will fail to build on subtargets except for mt7621
that has enabled the config.
The disabled PINCTRL_AW9523 config disappears after a refresh, it needs
to be added back manually.
Fixes: 675cf7557829 ("ramips: add config-5.15 for mt7620 subtarget") Fixes: 001176994a58 ("ramips: add config-5.15 for mt76x8 subtarget") Fixes: b9d9f33c330e ("ramips: add config-5.15 for rt288x subtarget") Fixes: 0164dc0c2563 ("ramips: add config-5.15 for rt305x subtarget") Fixes: ef59da866982 ("ramips: add config-5.15 for rt3883 subtarget") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sat, 17 Sep 2022 16:07:32 +0000 (01:07 +0900)]
ath79: specify factory.bin recipe for ASUS RP-AC51
Currently factory.bin image recipe of ASUS RP-AC51 is not specified
explicitly and is thus set to the leaked one from the device recipe
right above, i.e. ASUS PL-AC56. Fix it to avoid potential breakage.
Fixes: 416d4483e878 ("ath79: add support for ASUS RP-AC51") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Daniel Golle [Fri, 16 Sep 2022 23:33:30 +0000 (00:33 +0100)]
mac80211: clean and submit a bunch of rt2x00 patches
Clean and submit patches, mostly related to MT7620 to linux-wireless
mailing list:
https://patchwork.kernel.org/project/linux-wireless/list/?series=677770
Replace local patches with now submitted versions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The 'fxload' tool contained in the examples provided with libusb is
actually useful and turns out to be the only way to load firmware into
some rather ancient EZ-USB microcontrollers made by Cypress (formerly
Anchor Chips).
The original 'fxload' tool from hotplug-linux has been abandonned long
ago and requires usbfs to be mounted in /proc/bus/usb/ (like it was in
Linux 2.4...).
Hence the best option is to package the modern 'fxload' from the libusb
examples which (unsurprisingly) uses libusb and works on modern
systems.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Fri, 16 Sep 2022 19:11:05 +0000 (21:11 +0200)]
unetd: update to the latest version
21360a1b1ce6 cli: fix typo abfebece0af1 wg-linux: ship a copy of linux/wireguard.h 1cbb1a543cb3 pex: reduce unnecessary ping traffic 0c2f39e52d5d pex: remove pex event debug spam dcf1362c2104 pex: add support for sending/receiving global PEX messages via unix socket df5f70b8858c ubus: notify on network updates e58a56697131 add DHT discovery service be175767bc67 pex: keep active pex hosts after the specified timeout 543e4a3d2ed7 pex: move rx header check to callback function 395659b9c415 pex: move raw ip send code to sendto_rawudp() in utils.c dda15ea8b3b2 pex: add utility function to get the sockets based on type / address family e88f2cd4d3f0 utils: add support for passings address family to network_get_endpoint() 639cdcdf6eda pex: add support for figuring out the external data port via STUN servers 9144339ebe1f pex: improve handling of a longer list of PEX hosts 38212218ecdd unet-cli: add DHT support 0d37ca75434d pex: automatically create host entries from incoming endpoint port notifications 035fcc56ef60 host: keep multiple endpoint candidates, one for each type a089e8ae7504 pex: avoid sending a query to a host more than once every 15 seconds
libwolfssl-cpu-crypto is a variant of libwolfssl with support for
cryptographic CPU instructions on x86_64 and aarch64.
On aarch64, wolfSSL does not perform run-time detection, so the library
will crash when the AES functions are called. A preinst script attempts
to check for support by querying /proc/cpuinfo, if installed in a
running system. When building an image, the script will check the
DISTRIB_TARGET value in /etc/openwrt_release, and will abort
installation if target is bcm27xx.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
cc4eb79 ubus: support obtaining numeric error code 01c412c ubus: add toplevel constants for ubus status codes 8e240fa ubus: allow object method call handlers to return a numeric status code 5cdddd3 lib: add limit support to split() and replace() 0ba9c3e fs: add optional third permission argument to fs.open() c1f7b3b lib: remove fixed capture group limit in match() and regex replace()
Daniel Golle [Wed, 14 Sep 2022 19:23:17 +0000 (20:23 +0100)]
mediatek: build USB XHCI support as module
Instead of always including the XHCI driver in the kernel on all
MediaTek boards, selectively include the kernel module only on boards
which actually make use of USB functionality.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Olliver Schinagl [Wed, 31 Aug 2022 15:20:52 +0000 (17:20 +0200)]
realtek: rtl838x: Fix ethernet polling timeout on probe
Due to an oversight we accidentally inverted the timeout check. This
patch corrects this.
Fixes: 9cec4a0ea45b ("realtek: Use built-in functionality for timeout loop") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
[ wrap poll_timeout line to 80 char ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Olliver Schinagl [Wed, 31 Aug 2022 15:20:52 +0000 (17:20 +0200)]
realtek: Use built-in functionality for timeout loop
In commit 81e3017609be ("realtek: clean up rtl838x MDIO busy wait loop")
a hand-crafted loop was created, that nearly exactly replicate the
iopoll's `read_poll_timeout` functionality.
Ansuel Smith [Tue, 6 Jul 2021 01:28:55 +0000 (03:28 +0200)]
scripts: add clean of build dir to dl_cleanup script
Improve dl_cleanup by adding an option to also clean the build directory
related to the downloaded package.
The script will check every directory in build_dir/ and check if any
old package is present there. If outdated package are found, the old
one are cleared leaving only the last one.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Kabuli Chana [Sun, 7 Aug 2022 23:05:51 +0000 (17:05 -0600)]
kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIE
add Flow Queuing with Proportional Integral controller Enhanced (FQ-PIE) as an
optional kmod in network support and extract sched-pie from kmod-sched to
allow dependency on just kmod-sched-pie (PIE).
Piotr Dymacz [Mon, 20 Jun 2022 11:13:30 +0000 (13:13 +0200)]
CI: include automatic Pull Request Labeler
This adds GitHub CI action which makes use of 'Labeler', allowing
automatic labeling of new PRs, based on the modified files paths.
Below labels are supported and more can be added later:
- 'target/*'
- 'target/imagebuilder'
- 'kernel'
- 'core packages'
- 'build/scripts/tools'
- 'toolchain'
- 'GitHub/CI'
For more information:
https://github.com/marketplace/actions/labeler
Add support for the TP-Link SG2210P switch. This is an RTL8380 based
switch with eight RJ-45 ports with 802.3af PoE, and two SFP ports.
This device shares the same board with the SG2008P and SG2008. To
model this, declare all the capabilities in the sg2xxx dtsi, and
disable unpopulated on the lower end models.
Specifications:
---------------
- SoC: Realtek RTL8380M
- Flash: 32 MiB SPI flash (Vendor varies)
- RAM: 256 MiB (Vendor varies)
- Ethernet: 8x 10/100/1000 Mbps with PoE (all ports)
2x SFP ports
- Buttons: 1x "Reset" button on front panel
- Power: 53.5V DC barrel jack
- UART: 1x serial header, unpopulated
- PoE: 2x TI TPS23861 I2C PoE controller
Works:
------
- (8) RJ-45 ethernet ports
- (2) SFP ports (with caveats)
- Switch functions
- System LED
Not yet enabled:
----------------
- Power-over-Ethernet (driver works, but doesn't enable "auto" mode)
- PoE LEDs
Enabling SFP ports:
-------------------
The SFP port control lines are hardwired, except for tx-disable. These
lines are controller by the RTL8231 in shift register mode. There is
no driver support for this yet.
However, to enable the lasers on SFP1 and SFP2 respectively:
Install via serial console/tftp:
--------------------------------
The footprints R27 (0201) and R28 (0402) are not populated. To enable
serial console, 50 ohm resistors should be soldered -- any value from
0 ohm to 50 ohm will work. R27 can be replaced by a solder bridge.
The u-boot firmware drops to a TP-Link specific "BOOTUTIL" shell at
38400 baud. There is no known way to exit out of this shell, and no
way to do anything useful.
Ideally, one would trick the bootloader into flashing the sysupgrade
image first. However, if the image exceeds 6MiB in size, it will not
work. The sysupgrade image can also be flashed. To install OpenWrt:
Prepare a tftp server with:
1. server address: 192.168.0.146
2. the image as: "uImage.img"
Power on device, and stop boot by pressing any key.
Once the shell is active:
1. Ground out the CLK (pin 16) of the ROM (U7)
2. Select option "3. Start"
3. Bootloader notes that "The kernel has been damaged!"
4. Release CLK as sson as bootloader thinks image is corrupted.
5. Bootloader enters automatic recovery -- details printed on console
6. Watch as the bootloader flashes and boots OpenWrt.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[OpenWrt capitalisation in commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net>
projects / thirdparty / openwrt.git / log
