Erik Karlsson [Wed, 6 Sep 2023 10:33:17 +0000 (12:33 +0200)]
procd: create /dev/fd symlink
This is needed for ksh/bash style process substitution such as
<(command) and >(command) which was introduced in ash as of busybox
version 1.34.0 to work.
Signed-off-by: Erik Karlsson <erik.karlsson@genexis.eu>
ath79: add support for MikroTik RouterBOARD 750 r2 (hEX lite)
This patch adds support for the MikroTik RouterBOARD 750 r2, marketed as
hEX lite, a small indoor router with 5x 10/100 Mbps Ethernet ports, one
with PoE in. The device was already supported by the ar71xx target.
See https://mikrotik.com/product/RB750r2 for more details.
Not working:
- Serial port (already not working in ar71xx)
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Only the
"Internet" port will ask for an initramfs image. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Hannu Nyman [Wed, 13 Sep 2023 13:49:03 +0000 (16:49 +0300)]
scripts/download.pl: Remove stale download sites and convert to https
Remove the stale site definitions from @APACHE, KERNEL etc.
* Remove site that had dropped APACHE
* Remove KERNEL site leading to wrong directory
* Remove dead sites
* Convert ftp/http URLs to https, if possible. Remove duplicate
Thomas Makin [Tue, 5 Sep 2023 00:00:14 +0000 (20:00 -0400)]
ipq40xx: add support for Netgear RBX40
This adds support for the RBR40 and RBS40 (sold together as RBK40),
two netgear routers identical to SRR60/SRS60 in all but antennae (and
hardware id). See 2cb24b3f3c for details.
Signed-off-by: Thomas Makin <halorocker89@gmail.com>
Felix Fietkau [Thu, 14 Sep 2023 17:08:34 +0000 (19:08 +0200)]
hostapd: fix more AP+STA issues
When STA is disconnected, ensure that the interface is in a cleanly stopped
state:
- if in regular enable/disable state, stop beacons if necessary
- in any other state, disable the interface
When the STA is up, ignore repeated start commands for the same channel, in
order to avoid unnecessary AP restarts
Felix Fietkau [Wed, 13 Sep 2023 09:00:53 +0000 (11:00 +0200)]
hostapd: update to the latest version
8e6485a1bcb0 PEAP client: Update Phase 2 authentication requirements de9a11f4dde9 TTLS client: Support phase2_auth=2 b2a1e7fe7ab9 tests: PEAP and TTLS phase2_auth behavior 518ae8c7cca8 P2P: Do not print control characters in debug a4c133ea73c7 WPS: Optimize attribute parsing workaround 7a37a94eaa0d Check whether element parsing has failed f80d83368818 ACS: Remove invalid debug print fb2b7858a728 FILS: Fix HE MCS field initialization 50ee26fc7044 P2P: Check p2p_channel_select() return value a50d1ea6a2b3 Add QCA vendor attributes for user defined power save parameters 4636476b7f22 Set RRM used config if the (Re)Association Request frame has RRM IE e53d44ac63e8 AP MLD: Use STA assoc link address in external auth status to the driver 99a96b2f9df7 AP MLD: OWE when SME is offloaded to the driver 96deacf5d710 nl80211: Skip STA MLO link channel switch handling in AP mode d320692d918a AP MLD: Handle new STA event when using SME offload to the driver faee8b99e928 tests: Fix eht_mld_sae_legacy_client to restore sae_pwe c3f465c56c94 wlantest: Handle variable length MIC field in EAPOL-Key with OWE 605034240e0c wlantest: Support multiple input files 053bd8af8ed2 Recognize FTE MLO subelements 43b5f11d969a Defragmentation of FTE 3973300b8ded FTE protected element check for MLO Reassociation Response frame 74e4a0a6f1e4 wlantest: Learn AP MLD MAC address from Beacon frames a5a0b2cf7b1b wlantest: Find non-AP MLD only from affiliated BSSs of the AP MLD 74472758584d wlantest: Recognize non-AP MLD based on any link address for decryption 1ffabd697c67 wlantest: Learn non-AP MLD MAC address from (Re)Association Request frames 4e8e515f92b9 wlantest: Use MLO search for the STA in reassociation 49bf9f2df95a wlantest: Use the MLD MAC address as well for matching STA entries 5434a42ec69c wlantest: Search for FT Target AP using MLD MAC address as well a19fcf685cae wlantest: Include the MLD MAC address of the AP MLD in new-STA prints 709d46da73da wlantest: Do not claim update to AP MD MAC address if no change 770760454f9e wlantest: Do not update BSS entries for other AP MLDs in PTK cloning 084745ffc508 Add QCA vendor attributes for NDP setup bf9cbb462fd9 Fix writing of BIGTK in FT protocol 011775af9443 tests: Check for beacon loss when using beacon protection 8f148d51322f Fix a compiler warning on prototype mismatch b7db495ad9c9 AP: Fix ieee802_1x_ml_set_sta_authorized() 232667eafe0d Fix CCMP test vector issues 30771e6e05ed Include PTID in PV1 nonce construction for CCMP test vector 34841cfd9aba Minor formatting changes to CCMP test vectors a685d84139e6 BSS coloring: Fix CCA with multiple BSS bc0636841a70 wpa_supplicant: Fix configuration parsing error for tx_queue_* 2763d1d97e66 hostapd: Fix AID assignment in multiple BSSID 763a19286e2f AP: Add configuration option to specify the desired MLD address bd209633eb10 AP: Use is_zero_ether_addr() to check if BSSID is NULL bc0268d053b4 wlantest: Guess SAE/OWE group from EAPOL-Key length mismatch a94ba5322803 EHT: Support puncturing for 320 MHz channel bandwidth 7e1f5c44c97e EHT: 320 MHz DFS support 6f293b32112a QCA vendor attributes for updating roaming AP BSSID info 5856373554eb Extend QCA vendor command to include more parameters for netdev events e080930aa0a5 Define QCA vendor roam control RSSI attributes fe72afe713ad Define QCA vendor attribute for high RSSI roam trigger threshold 47a65ccbfde2 P2P: Clean wpa_s->last_ssid when removing a temporary group network 884125ab7d21 tests: P2P autonomous GO and clearing of networking information 7637d0f25053 P2P: Do not filter pref_freq_list if the driver does not provide one dd1330b502ff Fix hostapd interface cleanup with multiple interfaces 0a6842d5030e nl80211: Fix beacon rate configuration for legacy rates 36, 48, 54 Mbps d606efe054d5 tests: Beacon rate configuration for 54 Mbps f91d10c0e6aa tests: Update RSA 3k certificates 07d3c1177bbb tests: Make sae_proto_hostapd_status_* more robust 1085e3bdc6f6 Update iface->current_mode when fetching new hw_features 338a78846b44 Add a QCA vendor sub command for transmit latency statistics 9318db7c38bc wlantest: Use local variables for AA/SPA in FT Request/Response processing 628b9f10223d wlantest: Derive PMK-R1 and PTK using AA/SPA for MLO FT over-the-DS 104aa291e5c8 wlantest: Fix FT over-the-DS decryption 37c87efecfe3 wlantest: Search SPA using MLO aware find for FT Request/Response frame 19f33d7929e8 wlantest: Learn the Link ID for AP MLD affiliated BSSs 6ae43bb10323 wlantest: Learn link address for assoc link from (Re)Association Request 4c079dcc64da Increment hmac_sha*_vector() maximum num_elem value to 25 e6f64a8e1daf FT: FTE MIC calculation for MLO Reassociation Request frame a83575df5994 wlantest: FTE MIC calculation for MLO Reassociation Request frames ff02f734baf8 wlantest: Allow specific link BSS to be found with bss_find_mld() 7381c60db8f0 FT: Make FTE MIC calculation more flexible ac9bf1cc2a4c Decrement hmac_sha*_vector() maximum num_elem value to 11 aa08d9d76803 Fix use of defragmented FTE information 78b153f90a74 Calculate defragmented FTE length during IE parsing 8cf919ffd5c4 wlantest: FTE MIC calculation for MLO Reassociation Response frame d12a3dce82a9 wlantest: Store and check SNonce/ANonce for FT Authentication 20febfd7838d wlantest: Dump MLO association information in debug 609864d6a8a1 Add QCA vendor attribute to configure MLD ID in ML probe request 12154861e24a Add support for conversion to little endian for 24 bits c437665041c0 Add Non EHT SCS Capability in (Re)Association Request frames 33da386553b7 SCS: Add support for QoS Characteristics in SCS request edfca280cbe8 SCS: Add support for optional QoS Charateristics parameters 32dcec9529ec Send actual MFP configuration when driver takes care of BSS selection 123d16d860fa Update hw_mode when CSA finishes b3d852560bda Change QCA vendor configure attribution name of peer MAC address 12fabc4765c2 Add QCA vendor attribute for configuring max A-MPDU aggregation count f6eaa7b729cb Add QCA vendor attribute for TTLM negotiation support type f6dcd326fea7 wlantest: Indicate ToDS/FromDS values for BSS DATA entries 6ce745bb87d4 wlantest: MLO support for decrypting 4-address frames 850dc1482953 wlantest: Remove duplicated A1/A2/A3 override detection for MLO 770e5a808fbb wlantest: Determine whether A1 points to STA once in rx_data_bss_prot() 377d617b574a Define new BSS command info mask for AP MLD address d3ab6e001f62 wlantest: Use non-AP MLD's MLD MAC address in FT over-the-air derivation a845601ffe32 wlantest: Derive PTK in MLO using MLD MAC addresses for FT over-the-air 0cd2bfc8a402 wlantest: Fix FTE MIC calculation for MLO Reassociation Response frames 528abdeb673b wlantest: Learn group keys from MLO FT Reassociation Response frames 990600753dd9 wlantest: Defragment Basic MLE before processing de043ec01ab5 wlantest: Defragment the Per-STA Profile subelement bae1ec693c44 wlantest: Minimal parsing of Basic MLE STA Profile ba1579f3bf7c Clear BIGTK values from wpa_supplicant state machine when not needed b46c4b9a916a tests: Beacon protection and reconnection 3e71516936b7 Document per-ESS MAC address (mac_addr=3 and mac_value) f85b2b2dee3b Extend wpa_parse_kde_ies() to include EHT capabilities e3a68081bc1e driver: Add option for link ID to be specified for send_tdls_mgmt() c7561502f2e8 nl80211: Use a QCA vendor command to set the link for TDLS Discovery Response a41c8dbdd84e TDLS: Copy peer's EHT capabilities 626501434be1 TDLS: Learn MLD link ID from TDLS Discovery Response 5f30f62eead7 TDLS: Reply to Discovery Request on the link with matching BSSID 940ef9a05c0f TDLS: Use link-specific BSSID instead of sm->bssid for MLO cases f429064189c3 TDLS: Set EHT/MLO information for TDLS STA into the driver dd25885a9daa Remove space-before-tab in QCA vendor related definitions af6e0306b2a9 Fix typos in QCA vendor related definitions 4c9af238c1e4 Fix inconsistent whitespace use in QCA vendor related definitions e5ccbfc69ecf Split long comment lines in QCA vendor related definitions
Felix Fietkau [Sat, 9 Sep 2023 15:07:09 +0000 (17:07 +0200)]
hostapd: rework reload support and MAC address handling
MAC address and interface name assigned by mac80211.sh depend on the order in
which interfaces are brought up. This order changes when interfaces get added
or removed, which can cause unnecessary reload churn.
One part of the fix it making MAC address allocation more dynamic in both
wpa_supplicant and hostapd, by ignoring the provided MAC address using
the next available one, whenever the config does not explicitly specify one.
The other part is making use of support for renaming netdevs at runtime and
preserving the MAC address for renamed netdevs.
Aviana Cruz [Mon, 20 Jun 2022 13:55:45 +0000 (21:55 +0800)]
ramips: add support for mtk eip93 crypto engine
Mediatek EIP93 Crypto engine is a crypto accelerator which
is available in the Mediatek MT7621 SoC.
Signed-off-by: Aviana Cruz <gwencroft@proton.me> Co-authored-by: Richard van Schagen <vschagen@icloud.com> Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Hannu Nyman [Fri, 8 Sep 2023 16:47:01 +0000 (19:47 +0300)]
base-files: sysupgrade: Add 2 sec sleep into process KILL loop
Add 2 seconds sleep after each forcibly killed/tried-to-kill process
in the final process termination loop in sysupgrade stage2.
This is needed especially for qualcommax/ipq807x, where ath11k
wireless driver may have a long 10-20 seconds delay after termination
before actually getting killed. This often breaks sysupgrade.
The current KILL loop in kill_remaining does all 10 kill attempts
consecutively without any delay, as evidenced here in a failing sysupgrade.
It does not allow any time for the process to finalize its internal
termination.
Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2122)
Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2122)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep 2 19:06:00 EEST 2023 upgrade: Failed to kill all processes.
sysupgrade aborted with return code: 256
The change in this commit adds a 2 seconds delay after each kill attempt
in order to allow some processes to more gracefully handle their
internal termination.
The result is like this:
Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2309)
Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2324)
Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending signal KILL to hostapd (2309)
[ 699.827521] br-lan: port 7(hn5wpa2r) entered disabled state
[ 699.908673] device hn5wpa2r left promiscuous mode
[ 699.908721] br-lan: port 7(hn5wpa2r) entered disabled state
[ 701.038029] br-lan: port 6(hn5wpa3) entered disabled state
Sun Sep 3 11:15:16 EEST 2023 upgrade: Sending signal KILL to hostapd (2324)
[ 702.058256] br-lan: port 5(hn2wlan) entered disabled state
[ 709.250063] stage2 (8237): drop_caches: 3
Sun Sep 3 11:15:25 EEST 2023 upgrade: Switching to ramdisk...
The delay introduced here only kicks in if there is some process that
does not get terminated by the first TERM call. Then there is at least
one 2 sec wait after the first KILL loop round.
This commit is related to discussion in PRs #12235 and #12632
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Reviewed-by: Robert Marko <robimarko@gmail.com>
Jonas Gorski [Sat, 9 Sep 2023 10:44:42 +0000 (12:44 +0200)]
x86: geode: fix hwrng register accesses
When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.
To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.
Closes #13417.
Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com> Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com> Suggested-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Daniel Golle [Mon, 11 Sep 2023 11:50:38 +0000 (12:50 +0100)]
kernel: backport two fixes for MediaTek Ethernet driver
Fix PSE port assignment for 3rd GMAC on MT7988 and make sure dma_addr
is always initialized to prevent potentially accessing uninitialized
stack memory in the error path.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1. Power the device with WPS button pressed and wait around 10 seconds.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'recovery' image.
The device runs LEDE 17.01 (kernel 4.4.x) based firmware with 'failsafe'
mode available which allows alternative upgrade method:
1. Run device in 'failsafe' mode and change password for default user.
2. SSH to the device, transfer 'sysupgrade' image and perform upgrade
in forced mode, without preserving settings: 'sysupgrade -n -F ...'.
Other notes:
If you own early version of this device, the vendor firmware might
refuse OpenWrt image because of missing custom header. In that case,
ask vendor's customer support for stock firmware without custom header
support/requirement.
Daniel Golle [Sun, 10 Sep 2023 22:39:33 +0000 (23:39 +0100)]
arm-trusted-firmware-mediatek: fix hang on reboot on MT7622
With recent updates of TF-A the previously already fixed bug slipped
back into the source tree. Again, reorder bl2 init for MT7622 and
initialize WDT only after DRAM init has completed to avoid the
notorious hang.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 1 Sep 2023 23:54:40 +0000 (00:54 +0100)]
uboot-mediatek: sync mtk-snand driver with SDK
Sync SPI-NAND/ECC controller driver for MT7622, MT7981, MT7986 and MT7988:
* Platform data for MT7981 was actually missing and is now added.
* Add support for Winbond W25N01KV 1Gbit chip.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Since kernel 5.13 this is needed to enable USB ports on all devices in
subtarget. Previously TF-A and COMPHY driver might have set up this PHY,
but not anymore.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com>
1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`.
2. Upload the `factory.bin` using the device's Web interface.
3. Click the upgrade button and wait for the process to finish.
4. Access the OpenWrt interface using the same password.
5. Use the 'Restore' function to reset the firmware to its initial state.
**Notes:**
If you plan to recovery the stock firmware in the future, it's advisable
to connect the device via the serial port and enter failsafe mode to
back up all the MTD partitions before proceeding the steps above.
Signed-off-by: Patricia Lee <patricialee320@gmail.com>
Shiji Yang [Wed, 31 May 2023 00:31:18 +0000 (08:31 +0800)]
ath79: ignore the abused interrupt-map on PCIe node
ath79 PCIe interrupt controller has stopped working correctly. This
is because the DT exposing a non-sensical interrupt-map property,
and their drivers relying on the kernel ignoring this property[1].
This patch fixes the PCIe init error:
ath9k 0000:00:00.0: of_irq_parse_pci: failed with rc=-14
Notice:
This is just a workaround, not a fix. PCIe driver and related dts
node need to be rewritten.
Shiji Yang [Wed, 31 May 2023 02:50:04 +0000 (10:50 +0800)]
ath79: rename and sort patches by OpenWrt naming rules
The patches in the ath79 target have not been sorted for a long time
and they are very chaotic now. This patch sorts them again according
to the OpenWrt naming rules[1], so that we can better manage them.
Shiji Yang [Tue, 30 May 2023 07:05:06 +0000 (15:05 +0800)]
ath79: add missing symbols by refreshing kernel configs
Some symbols are outdated or missing due to daily kernel bumps. It's
better to re-add them. All configs are automatically refreshed by
'make kernel_oldconfig CONFIG_TARGET=taget' and
'make kernel_oldconfig CONFIG_TARGET=subtarget'
Kernel switching to fw_devlink=on as default broke probing some devices.
Revert it until we get a proper fix.
It seemed that mtd OF_POPULATED hack resolved probing issues but
apparently not all of them. We got reports about reading MAC using NVMEM
not working and USB controllers not working.
Chen Minqiang [Fri, 25 Aug 2023 22:38:18 +0000 (06:38 +0800)]
mediatek: fix the name of buswidth to bus-width
Fix the issue of dts buswidth cannot be applied properly with spi driver.
Fix the name of buswidth to bus-width in dts in order to fit the format
in linux spi kernel[1] so that spi-tx-bus-width & spi-rx-bus-width can be
parsed properly.
Thomas Bong [Thu, 31 Aug 2023 05:39:24 +0000 (07:39 +0200)]
ipq40xx: convert devolo Magic 2 WiFi next to DSA
Renamed the interfaces to match the other devices.
Name the interface connected to the builtin G.hn chip 'ghn'.
This might toggle at runtime while the G.hn chip is in the
bootloader.
Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Thomas Bong <thomas.bong@devolo.de>
Changes: 9dc0800 wireless-regdb: Update regulatory rules for Philippines (PH) 111ba89 wireless-regdb: Update regulatory rules for Egypt (EG) from March 2022 guidelines ae1421f wireless-regdb: Update regulatory info for Türkiye (TR) 20e5b73 wireless-regdb: Update regulatory rules for Australia (AU) for June 2023 991b1ef wireless-regdb: update regulatory database based on preceding changes
mvebu: add reset delays of PHYs for Fortinet FortiGate 50E
Add reset-(de)assert-us to ethernet PHYs on Fortinet FortiGate 50E to
solve instability after HW resetting of PHYs. (ex.: restarting "network"
service, etc...)
Fixes: #13391 Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Felix Fietkau [Sun, 3 Sep 2023 07:51:28 +0000 (09:51 +0200)]
hostapd: allow adding initial AP without breaking STA interface connection
When switching from a STA-only configuration to AP+STA on the same phy, the
STA was previously restarted in order to notify hostapd of the new frequency,
which might not match the AP configuration.
Fix the STA restart by querying the operating frequency from within hostapd
when bringing up the AP.
Hannu Nyman [Fri, 1 Sep 2023 15:56:49 +0000 (18:56 +0300)]
scripts/download.pl: remove stale GNOME download sites
Remove stale sites from @GNOME alias:
* remove 2 sites that have stale 3 years old content
* remove 2 sites that have dropped GNOME
* convert 2 sites from FTP to HTTP
Felix Fietkau [Fri, 1 Sep 2023 17:26:29 +0000 (19:26 +0200)]
scripts/package-metadata.pl: strip already selected conditions from dependencies
When a dependency is pulled in via conditional depends, and the condition
is already selected earlier in the chain, drop the condition.
This avoids some corner cases that trigger recursive dependencies.
This reverts commit 6c3eff9dd8bb8d0f268e8a0dbedbc6a33bdac796.
This appears to cause some regressions in generated config.
Will be replaced with a fixed version later
When a package foo depends on PACKAGE_foo:bar (in order to make build
dependencies conditional), tracking transitive dependencies can fail because
the internal seen flag is checked/set before eliminating the fake conditional
dependency. This can show up as a depends on not properly turned into a
select further down in the dependency chain
Daniel Golle [Thu, 31 Aug 2023 20:47:56 +0000 (21:47 +0100)]
netifd: update to latest git HEAD
f429bd94f99e system-linux: switch to new ETHTOOL_xLINKSETTINGS API
Fixes AN announcement for speeds beyond 1 GBit/s.
Adds new UCI options for Ethernet devices:
- autoneg: switch on or off auto-negotiation
- pause: if set to 0, do not announce symmetric flow control capability
- asym_pause: if set to 0, do not announce asymmetric flow control
capability.
- rxpause: if set overrides AN and forces RX pause accordingly
- txpause: if set overrides AN and forces TX pause accordingly
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 31 Aug 2023 11:02:00 +0000 (13:02 +0200)]
netifd: update to the latest version
db3934d2f740 scripts/netifd-wireless.sh: properly fix WPA3 Enterprise support
Support the following values for the different WPA3 Enterprise modes:
- wpa3-mixed: WPA3 Enterprise transitional mode
This supports EAP with both SHA1 and SHA-256, with optional MFP
- wpa3: WPA3 Enterprise only mode
This supports only SHA256 with mandatory MFP
- wpa3-192: WPA3 Enterprise with mandatory 192 bit support
This uses only GCMP-256 ciphers
Disable 192 bit support and GCMP-256 ciphers for the regular "wpa3" mode.
It seems that even leaving in optional 192 bit support breaks auth on some
clients, including iOS devices.
Rafał Miłecki [Sat, 26 Aug 2023 16:07:54 +0000 (18:07 +0200)]
kernel: add unset CONFIG_INPUT_IBM_PANEL symbol to config-6.1
This symbol was added by commit 2e6f34faa7e0 ("Input: Add IBM Operation
Panel driver") to v6.1. It depends on I2C so it's available to limited
amount of targets. It needs to be specified thought to allow kernel
configuration.
For bcm53xx this fixes:
IBM Operation Panel driver (INPUT_IBM_PANEL) [N/m/?] (NEW)
Felix Fietkau [Wed, 30 Aug 2023 10:27:04 +0000 (12:27 +0200)]
mac80211: remove non-upstream antenna gain configuration patch
It seems that this was not functioning properly and was likely completely unused.
Keeping this out of tree also introduced some annoying churn when updating, because
of the iw nl80211.h sync patch.
If this is needed, it will be reintroduced when/if it is added upstream
Mathew McBride [Sun, 6 Aug 2023 21:19:44 +0000 (21:19 +0000)]
kernel: enable vfio and vfio-pci for armsr-armv8
Arm platforms with the right hardware blocks (such as
GICv3.0+ interrupt controller and SMMU/IOMMU) are
able to use vfio-pci to pass through PCI devices
to a VM.
projects / thirdparty / openwrt.git / log
